02.2015 Teknion task chairs price & user guide
P R I C E & P RO D U C T G U I D E............................. 3 FA B R I C S.......................................... 57
2 2 2 2 2 2 2 2 2 2 2 2 2 2
contents M I N A S TA N D A R D...................................5 3 M I N A VA L U E......................................1 2 I N C E N T I V E.......................................1 8 K RY S TA L.........................................2 6 A M I C U S.........................................3 3 P RO J E K..........................................3 6 S AV E R A..........................................4 3 N A M I...........................................4 8 V O L U M E.........................................5 2
4 4 4 4 4 4 4 4 4 4 4 4 4 4
mina standard overview Mina Standard is an elegantly designed seating that offers flexibility at an affordable price. Executive Chair with Front Multi Limited Tilt is shown Ebony and Polished Aluminum base available 5 5 No headrest Front and back arm pad 5 Outer Back is Plastic Angle between seat and back of 110 Independent Arm Height Adjustment of 75mm 5 5 Synchro Tilt locking Seat Depth Adjustment of 63mm 5 Five Star Base 3 position lock 5 Hard Casters are standard 5 5 5 5 5 5 5
mina standard dimensions Mina Standard Mesh Chair without Lumbar 6 505 6 6 245 690 491 584 445 6 502 673 6 440-548 933-1041 190 622-730 510 451 6 6 Mina Standard Mesh Chair with Lumbar 6 6 6 245 6 6 6 6
mina standard dimensions (continued) Mina Standard Fabric Chair 7 505 7 245 690 495 584 7 405 502 660 7 440-548 940-1048 190 622-730 510 451 7 7 7 7 7 7 7 7 7 7
mina standard adjustment features & instructions SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT BACK TILT ADJUSTMENT 8 8 8 The Seat height paddle is located underneath the seat on the right side. To raise the chair, lift the lever up while lifting your weight from the seat until you reach the desired level, then release to lock in place. To lower the chair, lift the lever up and allow your weight to push the seat down until you reach the desired level, then release to lock in place. To adjust the seat depth, lift lever up and simultaneously lift your weight from the seat while sliding the seat forward or backward. Release lever to lock the seat in place. The tilt lock paddle is located underneath the seat on the left side To adjust the angle of reclination, push the lever forward to unlock the back and leave the chair in free-flow mode. Recline to the desired position and push the lever backward to lock the back in place. 8 ARM ADJUSTMENT 8 8 8 To adjust the arm height, lift up the button on the side of the arm and raise or lower to the desired position. Release the button to lock in place. Arm pad can be pushed front and back according to individual comfort. 8 8 8 8 8 8 8
mina standard material requirements COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. BACK SEAT COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] Mid-Back Mesh 0.5 n/a n/a n/a Mid-Back Fabric 0.6 13 0.5 13 9 9 9 9 9 Important Please note, the measurement, weight and volumes listed in this section are only approximations. Packaging requirements will vary depending on the location to which the product is being shipped, type of product and the amount of product being ordered. Dimensions are in millimeters and subject to change without notice. PACKING METHODS KD (Knock Down) One (1) chair per carton mina standard weight & volumes 9 9 9 9 CONTAINER VOLUME CARTON DIMENSIONS WEIGHT 20' GP 40' GP 40' GP HC inchesh inchesw inchesd kgs Mid-Back Mesh 199 408 475 26 13 27 20.5 Mid-Back Fabric 173 357 408 26 14 27 21.5 9 9 9 9 9
K L N M S Mina Standard Task Chair FEATURES Standard pneumatic cylinder provides height adjustment of 100mm Seat depth adjustment of 63mm Back-tilt can be locked at 4 positions or left free flow Height adjustment arm with pivoting arm cap Tension control 10 NOTES Chair comes in a CKD (complete knock down) unit. Lumbar option is only available for Mesh Back. 10 10 10 PRODUCT OPTIONS Size F Mid Back Mechanism Style 1 Standard Arm Style N No Arms H Height Adjustable T-Arm M Mesh U Upholstery Back Style Mesh Fabric Leather Upholstery Back Finish 10 10 SAMPLE ORDER CODE KLNMS F 1 H M SP04 10 10 PRODUCT OPTIONS CONTINUED Upholstery Cylinder Style Seat Finish Fabric 1 Standard Leather Lumbar Support N No Lumbar Support Y Lumbar Support Base Finish E Ebony Nylon Base C Polished Aluminum Base Casters A Soft Casters Y Hard Casters 10 10 SAMPLE ORDER CODE CONTINUED X720 1 N E A See pricing on following page. 10 10 10 10
K L N M S Mina Standard Task Chair (Continued) DESCRIPTION MESH BACK (M) PRICE COM/ COL/ Leather LA/ Grade AA Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms 401 441 461 481 501 521 541 561 581 601 621 Height-Adjustable T-Arms 453 493 513 533 553 573 593 613 633 653 673 UPHOLSTERY BACK (H) No Arms 401 421 526 561 596 631 666 701 736 806 806 Height-Adjustable T-Arms 453 473 578 613 648 683 718 753 788 858 858 If Polished Aluminum (C) Base is specified add 165 If Soft Casters (A) are specified add 15 If Lumbar Support (Y) is specified add 30 11 11 11 11 11 11 11 11 11 11 11 11 11 11
mina value overview Mina Value is an elegantly designed seating that offers flexibility at an affordable price. 12 Mina Value chair with synchro-tilt, 4 is shown 12 12 No headrest Front and back arm pad 12 Outer Back is Plastic Angle between seat and back of 110 Independent Arm Height Adjustment of 75mm 12 12 Synchro Tilt locking 12 Five Star Base 12 Hard Casters are standard 12 12 12 12 12 12
mina value dimensions Mina Value Mesh Chair 13 13 13 13 13 13 Mina Value Fabric Chair 13 13 533 13 245 710 476 591 13 425 13 203 630-738 438 559 533 710 489 584 445 502 445-552 660 940-1048 203 648-756 510 451 425-533 510 845-953 451 13 13 13
mina value adjustment features & instructions SEAT HEIGHT ADJUSTMENT TENSION ADJUSTMENT ARM HEIGHT ADJUSTMENT 14 14 14 The Seat height paddle is located underneath the seat on the right side. To raise the chair, lift the lever up while lifting your weight from the seat until you reach the desired level, then release to lock in place. To lower the chair, lift the lever up and allow your weight to push the seat down until you reach the desired level, then release to lock in place. Tension knob is located underneath the seat in the middle. Leaning back, determine if the resistance of the chair is comfortable. For less resistance, turn adjustment knob clockwise. For greater resistance, turn the knob counterclockwise To adjust the arm height, lift up the button on the side of the arm and raise or lower to the desired position. Release the button to lock in place. Arm pad can be pushed front and back according to individual comfort. 14 BACK TILT ADJUSTMENT 14 14 14 14 The tilt lock paddle is located underneath the seat on the right side. To adjust the angle of reclination, push the lever forward to unlock the back and leave the chair in free-flow mode. Recline to the desired position and push the lever backward to lock the back in place. 14 14 14 14 14 14
mina value material requirements COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. BACK SEAT COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] Mid-Back Mesh 1 n/a n/a Mid-Back Fabric 1 n/a 0.5 n/a 15 15 15 15 15 mina value weight & volumes 15 Important Please note, the measurement, weight and volumes listed in this section are only approximations. Packaging requirements will vary depending on the location to which the product is being shipped, type of product and the amount of product being ordered. Dimensions are in millimeters and subject to change without notice. 15 15 PACKING METHODS KD (Knock Down) One (1) chair per carton CONTAINER VOLUME CARTON DIMENSIONS WEIGHT 20' GP 40' GP 40' GP HC inchesh inchesw inchesd kgs Mid-Back Mesh 199 408 475 26 13 27 17 Mid-Back Fabric 199 408 475 26 13 27 18.5 15 15 15 15 15 15
K L N M V Mina Value Task Chair FEATURES Standard pneumatic cylinder provides height adjustment of 100mm Back-tilt can be locked at 1 position upright or left free flow Height adjustment arm with pivoting arm cap Tension control 16 NOTES Chair comes in a CKD (complete knock down) unit. Lumbar option is only available for Mesh Back. 16 16 16 PRODUCT OPTIONS Size F Mid Back Mechanism Style 1 Standard Arm Style N No Arms H Height Adjustable T-Arm M Mesh U Upholstery Back Style Mesh Fabric Upholstery Back Finish 16 16 SAMPLE ORDER CODE KLNMV F 1 H M SP04 16 16 PRODUCT OPTIONS CONTINUED Upholstery Cylinder Style Seat Finish Fabric 1 Standard Lumbar Support N No Lumbar Support Y Lumbar Support Base Finish E Ebony Nylon Base Casters A Soft Casters Y Hard Casters 16 16 SAMPLE ORDER CODE CONTINUED X720 1 N E A See pricing on following page. 16 16 16 16
K L N M V Mina Value Task Chair (Continued) DESCRIPTION MESH BACK (M) PRICE COM/ COL/ Grade AA Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms 329 371 391 411 431 451 471 491 511 531 551 Height-Adjustable T-Arms 381 423 443 463 483 503 523 543 563 583 603 UPHOLSTERY BACK (H) No Arms 281 351 386 421 456 491 526 561 596 631 666 Height-Adjustable T-Arms 333 403 438 473 508 543 578 613 648 683 718 If Soft Casters (A) are specified add 15 If Lumbar Support (Y) is specified add 30 17 17 17 17 17 17 17 17 17 17 17 17 17 17
incentive overview Incentive is a comfortable, high quality chair that provides simple, yet effective ergonomic seating. 18 Incentive Task Executive chair with synchro-tilt, 5 shown 18 18 Pivoting Arm Cap 30 inwards Independent Arm Height Adjustment of 79mm 18 Back is fabric or Leather Standard Seat Height-Adjustment of 99mm 18 Synchro Tilt Locking 18 Arm Width Adjustment of 25-51mm Tension Control Seat Depth Adjustment of 51mm 18 5-Star Base 18 Hard Casters are standard 18 18 18 Statement of Line 18 18 High Back T-Arms High Back T-Arms High Back No Arms 18
incentive dimensions & material requirements Dimensions Width Between Arm Before Expand Armrest 460mm After Expand Armrest 505mm 19 Overall Height From Floor High Back Standard Synchron 1 locking 1035mm with Seat Sliding Epron DA with Seat Sliding 1035mm Epron Flex with Seat Sliding 1035mm High Back Standard Synchron 1 locking 925mm with Seat Sliding Epron DA with Seat Sliding 925mm Epron Flex with Seat Sliding 925mm Back Height From Seat High Back 570mm without Sliding 590mm After Back Height Adjust 640mm without Sliding 660mm Mid Back 460mm without Sliding 480mm After Back Height Adjust 530mm without Sliding 570mm Seat Height Standard Synchron 1 420-530mm with Sliding 390-500mm without Sliding Epron DA 465-575mm with Sliding 435-545mm without Sliding Epron Flex 465-575mm with Sliding 435-545mm without Sliding 19 19 19 19 19 Functional Seat Depth Before Sliding 415mm After Sliding 465mm Seat Width High Back 490mm Mid Back 490mm 19 Overall Depth Teknion Chair Base 645mm Overall Width Before Expand Armrest 665mm After Expand Armrest 715mm 19 19 19 COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. BACK SEAT COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] Mid-Back 1 18 1 10 Mid-Back 1 20 1 10 19 19 19 19
incentive adjustment features & instructions SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT BACK HEIGHT ADJUSTMENT 20 20 20 20 The seat height-adjustment paddle is located underneath the seat on the right side. To raise the chair, lift the paddle up, while lifting your weight from the seat, until you reach the desired height, then release. To lower the chair, lift the paddle up, allowing your weight to push the seat down until you reach the desired height, then release. To adjust the seat depth, lift lever up. Simultaneously lift your weight from the seat while sliding the seat forward or backwards. Release the lever to lock the seat in place. The back height adjustment is activated by the chair s back. To adjust the lumber height, lean forward and grasp both sides of the lower portion of the outside back. To raise, slide the back up. To lower, slide the back all the way to the top and then lower to desired height. Release to lock in place. ARM HEIGHT ADJUSTMENT ARM WIDTH ADJUSTMENT SYNCHRO TILT 20 20 20 20 To adjust the arm height, press the button in and move the arm up or down to the desired height. Release the button to lock in place. To adjust width of each arm, push the lever down and slide the arm to the desired position. Push the lever up to lock the arm in place. The tilt control paddle on the left locks the chair into four different positions. To tilt the chair, sit in the chair and unlock the paddle by pushing it down, which will release the back to free flow. To lock in position, pull the paddle up and the back will lock in position. 20 20 20 20 20 20
incentive weight & volumes Important Please note, the measurement, weight and volumes listed in this section are only approximations. Packaging requirements will vary depending on the location to which the product is being shipped, type of product and the amount of product being ordered. Dimensions are in millimeters and subject to change without notice. 21 PACKING METHODS CKD (Complete Knock Down) One (1) chair per carton CONTAINER VOLUME CARTON DIMENSIONS WEIGHT 20' GP 40' GP 20' GP mmh mmw mmd lbs Mid-Back 96 204 255 530 760 680 51 High-Back 96 204 255 530 760 680 47 21 21 21 21 21 21 21 21 21 21 21 21 21
22 22 K L N K Incentive Task Chair FEATURES Standard pneumatic cylinder provides height adjustment of 99mm Seat depth adjustment of 51mm Back-tilt can be locked at 5 positions or left free flow Back lumbar adjustment at 57mm Height, width and depth adjustment arm with pivoting arm cap Tension control NOTES Single Upholstery: The same fabric is applied to the seat and inside back. Dual Upholstery: Two different fabrics are applied to the chair, one fabric to the seat and the other fabrics to the back. First fabric listed will apply to the back and is the grade of fabric used to price the chair. A dual upholstery upcharge applies. Chair comes in CKD (complete knock down) unit, unless otherwise specified. Chair with recliner synchro mechanism has one position locking without lumbar adjustment. 22 22 22 PRODUCT OPTIONS Size F Mid Back H High Back Mechanism Style 1 Synchro 5 Locking Position 2 Synchro 5 Locking Position with Forward Tilt 3 Recliner Synchro 1 Locking N No Arms Arm Style H Height Adjustable T-Arm W Height & Width Adjustable T-Arm Upholstery Style P Single D Dual Fabric Leather Upholstery Back Finish Fabric Leather Upholstery Seat Finish 22 SAMPLE ORDER CODE KLNK F 1 H D X721 X720 22 PRODUCT OPTIONS CONTINUED Seat Depth Adjustment Cylinder Style Base Finish Casters Assembly Style 22 N No Seat Depth Adjustment S With Seat Depth Adjustment 1 Standard 2 High 3 Low E Ebony Nylon Base C Polished Aluminum A Soft Casters Y Hard Casters N CKD (complete knock-down) F Full Assemble 22 22 SAMPLE ORDER CODE CONTINUED S 1 E Y N See pricing on following page. 22 22 22 22
K L N K Incentive Task Chair (Continued) DESCRIPTION SINGLE UPHOLSTERY (P) MID BACK (F) SYNCHRO 5 LOCKING POSITION (1) PRICE COM/ COL/ Leather LA/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms 623 686 748 811 873 934 996 1059 1121 1184 Height Adjustable T-Arms 716 779 841 904 966 1027 1089 1152 1214 1277 Height & Width Adjustable T-Arms 738 801 863 926 988 1049 1111 1174 1236 1299 SYNCHRO 5 LOCKING POSITION WITH FORWARD TILT (2) No Arms 653 716 778 841 903 964 1026 1089 1151 1214 Height Adjustable T-Arms 746 809 871 934 996 1057 1119 1182 1244 1307 Height & Width Adjustable T-Arms 768 831 893 956 1018 1079 1141 1204 1266 1329 RECLINER SYNCHRO 1 LOCKING (3) No Arms 546 609 671 734 796 857 919 982 1044 1107 Height Adjustable T-Arms 639 702 764 827 889 950 1012 1075 1137 1200 Height & Width Adjustable T-Arms 661 724 786 849 911 972 1034 1097 1159 1222 UPHOLSTERY BACK (H) SYNCHRO 5 LOCKING POSITION (1) No Arms 632 695 757 820 882 944 1007 1068 1130 1193 Height Adjustable T-Arms 725 788 850 913 975 1037 1100 1161 1223 1286 Height & Width Adjustable T-Arms 747 810 872 935 997 1059 1122 1183 1245 1308 SYNCHRO 5 LOCKING POSITION WITH FORWARD TILT (2) No Arms 662 725 787 850 912 974 1037 1098 1160 1223 Height Adjustable T-Arms 755 818 880 943 1005 1067 1130 1191 1253 1316 Height & Width Adjustable T-Arms 777 840 902 965 1027 1089 1152 1213 1275 1338 RECLINER SYNCHRO 1 LOCKING (3) No Arms 555 618 680 743 805 867 930 991 1053 1116 Height Adjustable T-Arms 648 711 773 836 898 960 1023 1084 1146 1209 Height & Width Adjustable T-Arms 670 733 795 858 920 982 1045 1106 1168 1231 23 23 23 23 23 23 23 23 23 If Seat Depth Adjustment (S) Base is specified add 30 If Polished Aluminum (C) Base is specified add 165 If Soft Casters (A) are specified add 15 If Full Assemble (F) is specified add 12 Pricing is continued on the following pages. 23 23 23 23 23
K L N K Incentive Task Chair (Continued) 24 24 24 24 24 DESCRIPTION DUAL UPHOLSTERY (D) MID BACK (F) SYNCHRO 5 LOCKING POSITION (1) PRICE COM/ COL/ Leather LA/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms 656 719 781 844 906 967 1029 1092 1154 1217 Height Adjustable T-Arms 749 812 874 937 999 1060 1122 1185 1247 1310 Height & Width Adjustable T-Arms 771 834 896 959 1021 1082 1144 1207 1269 1332 SYNCHRO 5 LOCKING POSITION WITH FORWARD TILT (2) No Arms 686 749 811 874 936 997 1059 1122 1184 1247 Height Adjustable T-Arms 779 842 904 967 1029 1090 1152 1215 1277 1340 Height & Width Adjustable T-Arms 801 864 926 989 1051 1112 1174 1237 1299 1362 RECLINER SYNCHRO 1 LOCKING (3) No Arms 579 642 704 767 829 890 952 1015 1077 1140 Height Adjustable T-Arms 672 735 797 860 922 983 1045 1108 1170 1233 Height & Width Adjustable T-Arms 694 757 819 882 944 1005 1067 1130 1192 1255 24 24 24 24 24 UPHOLSTERY BACK (H) SYNCHRO 5 LOCKING POSITION (1) No Arms 665 728 790 853 915 977 1040 1101 1163 1226 Height Adjustable T-Arms 758 821 883 946 1008 1070 1133 1194 1256 1319 Height & Width Adjustable T-Arms 780 843 905 968 1030 1092 1155 1216 1278 1341 SYNCHRO 5 LOCKING POSITION WITH FORWARD TILT (2) No Arms 695 758 820 883 945 1007 1070 1131 1193 1256 Height Adjustable T-Arms 788 851 913 976 1038 1100 1163 1224 1286 1349 Height & Width Adjustable T-Arms 810 873 935 998 1060 1122 1185 1246 1308 1371 RECLINER SYNCHRO 1 LOCKING (3) No Arms 588 651 713 776 838 900 963 1024 1086 1149 Height Adjustable T-Arms 681 744 806 869 931 993 1056 1117 1179 1242 Height & Width Adjustable T-Arms 703 766 828 891 953 1015 1078 1139 1201 1264 If Seat Depth Adjustment (S) Base is specified add 30 If Polished Aluminum (C) Base is specified add 165 If Soft Casters (A) are specified add 15 If Full Assemble (F) is specified add 12 24 24 24 24
25 25 25 25 25 25 25 25 25 25 25 25 25 25
krystal overview Krystal is an elegantly designed seating that offers flexibility at a affordable price. 26 Executive Chair with Front Multi Limited Tilt is shown. Ebony and Polished Aluminum base available. 26 26 Height & Angle Adjustment Headrest Free Rotating Arm Pad Independent Arm Height Adjustment of 61mm 26 Outer Back is Plastic Angle between Seat and Back of 103 26 26 Synchro Tilt Locking Seat Depth Adjustment of 51mm Front Multi Limited Tilt 26 Five Star Base Hard Caster are standard 26 26 26 26 Statement of Line 26 26 Mid Back T-Arms Mid Back No Arms High Back T-Arms 26
krystal dimensions & material requirements Dimensions Width Between Arms 488mm Back Width 503 Headrest Height from Back 127-168mm 27 27 27 Angle Between Seat & Back 103 Back Height from Seat 584mm 27 27 Arm Height from Floor 615-686 mm Back Height from Floor 1026-1125mm Seat Height from Floor 445-541mm 27 27 Functional Seat Width 480mm Functional Seat Depth 416-465mm 27 27 27 COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. BACK SEAT COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] Mid-Back n/a n/a 1 14 High-Back n/a n/a 1 14 27 27 27 27
krystal adjustment features & instructions SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT BACK HEIGHT ADJUSTMENT 28 28 28 28 The seat height-adjustment paddle is located underneath the seat on the right side. To raise the chair, lift the paddle up, while lifting your weight from the seat, until you reach the desired height, then release. To lower the chair, lift the paddle up, allowing your weight to push the seat down until you reach the desired height, then release. To adjust the seat depth, depress button and simultaneously lift your weight from the seat while sliding the seat forward or backward. Release button to lock the seat in place. Leaning back, decide if the resistance of the chair is comfortable. If it is too stiff, pull the tensionadjustment knob out and turn in clockwise. If the chair does not provide enough resistance, turn the knob counterclockwise. ARM HEIGHT ADJUSTMENT ARM WIDTH ADJUSTMENT SYNCHRO TILT 28 28 28 28 To adjust the arm height, press the button in and move the arm up or down to the desired height. Release the button to lock in place. To adjust the headrest height, raise or lower the headrest to the desired height. The back tilt adjustment paddle is located underneath the seat on the left side. The back tilt adjustment provides the ability to lock the back into four different positions or leave in three-flow. To tilt the chair, sit in the chair and unlock the paddle by pulling it up, which will release the back to free flow. To lock the desired position, push the paddle down and the back will lock. 28 28 28 28 28 28
krystal weight & volumes Important Please note, the measurement, weight and volumes listed in this section are only approximations. Packaging requirements will vary depending on the location to which the product is being shipped, type of product and the amount of product being ordered. Dimensions are in millimeters and subject to change without notice. 29 PACKING METHODS CKD (Complete Knock Down) One (1) chair per carton CONTAINER VOLUME CARTON DIMENSIONS WEIGHT 20' GP 40' GP 20' GP mmh mmw mmd lbs Mid-Back 120 255 255 760 680 440 39 High-Back 120 255 255 760 680 440 42 29 29 29 29 29 29 29 29 29 29 29 29 29
K L N F Krystal Task Chair FEATURES Standard pneumatic cylinder provides height adjustment of 102mm Seat depth adjustment of 51mm Front multi limited tilt provides 3 titling angles Height adjustment arm with pivoting arm cap Tension control 30 30 NOTES Chair comes in CKD (complete knock down) unit, unless otherwise specified. Headrest upholstery in black vinyl. Lumbar is pre-fixed on Krystal Chair and cannot be ordered as a separate component. 30 PRODUCT OPTIONS Size Mechanism Style Arm Style Upholstery Back Finish Upholstery Seat Finish 30 F Mid Back H High Back 1 Standard N No Arms H Height Adjustable T-Arm F402 Black Crystal Fabric Leather 30 30 SAMPLE ORDER CODE KLNF F 1 H F402 X720 30 PRODUCT OPTIONS CONTINUED Cylinder Style Lumbar Support Base Finish Casters Assembly Style 30 1 Standard 2 High 3 Low N No Lumbar Support Y Lumbar Support E Ebony C Polished Aluminum A Soft Casters Y Hard Casters N CKD (complete knock-down) F Full Assemble 30 30 SAMPLE ORDER CODE CONTINUED 1 Y E Y N See pricing on following page. 30 30 30 30
K L N F Krystal Task Chair (Continued) DESCRIPTION MID BACK (F) PRICE COM/ COL/ Leather LA/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms 784 855 901 948 994 1041 1088 1134 1181 1227 Height Adjustable T-Arms 880 951 997 1044 1090 1137 1184 1230 1277 1323 HIGH BACK (H) No Arms 844 914 960 1007 1053 1100 1147 1193 1240 1286 Height Adjustable T-Arms 940 1010 1056 1103 1149 1196 1243 1289 1336 1382 If Lumbar Support is specified add 27 If Polished Aluminum (C) Base is specified add 165 If Soft Casters (A) are specified add 15 If Full Assembly (F) is specified add 12 31 31 31 31 31 31 31 31 31 31 31 31 31 31
32 32 32 32 32 32 32 32 32 32 32 32 32 32
amicus dimensions & material requirements Dimensions For Conversion to Metric, multiply dimension by 25.4. Guest Cantilever Guest Four-Leg WEIGHT 20 lbs 20 lbs 33 Backrest Width 19" 33 Cantilever 33 33 Arm Height from Seat 8" Lumbar Apex Height General Use 9" Overall Height (Standard Cylinder) 31" Back Height from Seat 15 1/2" Angle between Seat and Back 97 Seat Height Guest Four-Leg 17" Guest Cantilever 18" Arm Height from Floor 25 3/4" 33 33 33 33 Seat Width 20 1/4" Overall Width 24" Seat Depth 17 1/4" Overall Depth 22" 33 33 COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. SINGLE UPHOLSTERED DUAL UPHOLSTERED SEAT DUAL UPHOLSTERED BACK COM COL COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] [yards] [sq. ft] Guest Chairs Seat only 1 8 1/2 n/a n/a n/a n/a Guest Chairs Seat and Back 1 10 1/2 n/a n/a n/a n/a 33 33 33 33
34 N A M G Amicus Guest Chair FEATURES Outer back and arms are plastic and finished in Ebony Multi-surface glides are standard when the Cantilever or Four-Leg frame style is specified Hard casters are standard when the Four-Leg with Casters frame style is specified. Soft casters may be ordered as an option NOTES When plastic back style is specified only the seat will be upholstered. When upholstered pad on plastic back is specified both the seat and inside back will be upholstered. 34 34 34 34 Four-Leg with Glides PRODUCT OPTIONS Size Frame Style D Low-Back Cantilever with Glides C Cantilever with Glides F Four-Leg with Glides (Shown) G Four-Leg with Casters Arm Style N No Arms K Integrated Arms Upholstery/Back Style Z Plastic U Upholstered Pad on Plastic Back Upholstery Finish Fabric Leather Frame Finish E Ebony C Chrome K Mica Silver Casters/Glides (Optional) A Casters, Soft (For G frame style) D Glides (For C & F frame style) 34 SAMPLE ORDER CODE NAMG D C K Z K 34 DESCRIPTION WITHOUT CASTERS PRICE 34 34 34 34 34 COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 Leather LA FOUR-LEG (F) PLASTIC BACK (Z) No Arms 305 331 357 384 409 435 461 486 513 603 482 Integrated Arms 342 367 393 420 445 471 497 523 550 640 519 FOUR-LEG (F) UPHOLSTERED BACK (U) No Arms 350 376 403 428 454 480 506 533 559 649 528 Integrated Arms 386 412 439 465 491 516 542 569 595 685 564 CANTILEVER (C) PLASTIC BACK (Z) No Arms 356 383 408 434 460 485 512 538 564 654 533 Integrated Arms 392 419 444 470 496 522 549 574 600 690 569 CANTILEVER (C) UPHOLSTERED BACK (U) No Arms 401 427 453 479 505 531 558 584 610 700 579 Integrated Arms 437 464 490 515 541 567 594 620 646 736 615 If Mica is specified add 54 If Chrome Frame (C) is specified add 54 If Soft Casters (A) are specified add 28 34 34
N A M G Amicus Guest Chair (Continued) DESCRIPTION WITH CASTERS PRICE 35 COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 Leather LA FOUR-LEG (G) PLASTIC BACK (Z) No Arms 334 360 386 413 438 463 490 515 542 631 511 Integrated Arms 371 396 422 449 474 499 526 552 579 668 548 FOUR-LEG (G) UPHOLSTERED BACK (U) No Arms 379 405 432 457 483 508 535 561 587 677 557 Integrated Arms 415 441 468 494 519 544 571 597 623 713 593 If Mica is specified add 54 If Chrome Frame (C) is specified add 54 If Soft Casters (A) are specified add 28 35 35 35 35 35 35 35 35 35 35 35 35 35
projek overview Projek is a chair for all people and environments. 36 36 Projek chairs have been designed and tested for users weighing up to 300 lbs Projek chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could result in unexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer for appropriate selection Synchro-tilt weight-balancing with 3.5:1 ratio 36 36 36 Optional fixed headrest Shrinx Mesh 3D Pivoting Arm Caps pivot 180 (with auto safety lock) Lumbar Apex Adjustment of 102mm 36 36 36 Seat Depth Adjustment of 76mm Weight Balancing Synchro-Tilt Motion Tilt Limiter / Back Lock Plastic or Aluminum Five Star Base Arm Height Adjustment Seat Height Adjustment of 102mm Tension Control Arm Width Adjustment 60mm hard casters are standard 36 36 36 Statement of Line 36 36 36
projek finish guide When selecting finishes for the Inner and Outer Frame, Lumbar and Mesh of the Projek family of chairs, Task chair and Swivel Stool, it is possible to select different finishes for the components listed below or to have the same finish specified throughout. Task Chair and Stool: The headrest's frame and fabric finishes default to the Outer Frame Finish and Seat Fabric Finish (Assembled Task Chair and Stool only) Arm finish defaults to Outer Frame Finish. For Stone Arm Finish, major finish is Stone, Arm Rest Pad and Arm Support in Ebony Guest Chair: Lumbar Element not included Arm Rest in Ebony only 37 37 37 37 Shrinx Mesh Back 37 Plastic Lumbar Element Arm Rest Pad 37 Arm Rest 37 Plastic Inner Frame Plastic Outer Frame Arm Support 37 37 37 37 37 37 37
projek dimensions & material requirements Dimensions WEIGHT 38 Width Between Arms 2D 457-524mm 3D 441-514mm General Use/Executive Task Swivel Stool 35 lbs 41.8 lbs 38 Back Width 457mm 38 38 Headrest 184mm 38 Lumber Apex Height 146-241mm Angle between Seat and Back Task 96.3-116.2 Swivel Stool 96.3 38 Arm Height from Seat 2D 194-292mm 3D 191-260mm Back Height from Seat 575mm 38 38 Overall Height Task 3981-1083mm Swivel Stool 1134-1337mm Seat Height from Floor Task Standard 406-508mm Task High 451-581mm Task Low 381-448mm Swivel Stool 508-762mm 38 38 Seat Width 514mm Overall Width 743mm Overall Depth 743mm Seat Depth 413-489mm 38 38 38 COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. DUAL UPHOLSTERED COM COL [yards] [sq. ft] Seat 7/8 8 3/4 Headrest 1/2 4 7/8 38
projek adjustment features & instruction SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT 3D ARM PIVOT ADJUSTMENT 39 Seat height can be adjusted by pulling outward on the button below the seat on the right hand side. When this lever is pulled, the weight of the body will cause the seat to lower, and releasing it stops the seat at the desired height. Pulling outward on the button with no weight on the seat allows it to rise. To adjust the seat depth, pull outward on the button below the seat on the left-hand side and simultaneously lift your weight from the seat while sliding the seat forward or backward. Release button to lock the seat in place. To pivot the arm cap, depress the auto safety lock button on the outside of the armrest and pivot 180 degrees to desired position. Release the button to lock in place. 39 39 ARM HEIGHT ADJUSTMENT BACK TILT ADJUSTMENT TILT TENSION ADJUSTMENT 39 39 To adjust the arm height, press the button below either arm rest to raise or lower it to the desired position. Release the button to lock in place. Turning the grip found under the left side of the seat limits the back tilt travel and locks the back. Travel is limited on 3 positions with back lock in the upright position. Fine tune the weight balanced tension by rotating the dial located below the seat centre to suit personal preference. 39 LUMBAR HEIGHT-ADJUSTMENT ARM WIDTH ADJUSTMENT STOOL FOOT RING HEIGHT 39 39 39 The lumbar height-adjustment knobs can be found on the back where the Inner Frame connects to the Lumbar Element. The height of the lumbar support can be adjusted by sliding them up and down. To adjust the width of each arm, turn the dial clockwise to release the arm lock. Slide the arm inward or outward to the desired position. Tighten the knob to lock the arm in place. To raise or lower the stool s foot ring, turn the foot ring s knob counter clockwise to release the foot ring and adjust the ring until you reach the desired level. Turn the knob clockwise to lock in place. 39 39 39 39 39
40 40 40 N P R T Projek Synchro-Tilt Task Chair 2D Arm 3D Arm FEATURES Standard pneumatic cylinder provides height adjustment of 102mm Seat depth adjustment of 76mm Lumbar height adjustment of 102mm Back tilt can be locked in the upright position or left to free flow to 3 defined angle ranges Weight-balancing with a travel limiter synchro-tilt mechanism (3.5:1 tilt ratio) with unique preference control to tilt tension. Back recline angle range is 0-20 and seat adjustment range angle is 0-6.5 Ebony base is available in plastic only Hard casters are well suited for soft flooring such as carpeting Soft casters are available for use on hard flooring, such as wood, concrete or tile Headrest option is only available on Fully Assembled style NOTES Headrest's frame and fabric finishes default to Outer Frame Finish and Seat fabric finish. Arm finish to match Outer Frame Finish. For Stone Arm Finish, major Finish is Stone with Arm Rest Pad and Arm Post Support in Ebony. Projek chair is Dual Upholstery with Shrinx Mesh available on the back only and Teknion s Standard and Graded-In-Fabrics on seat. See Projek Finish Guide to define Plastic Outer Frame, Plastic Inner Frame & Lumbar Element finish details. 40 40 40 PRODUCT OPTIONS Headrest N No Headrest Arm Style N No Arms F Fixed T-Arms W 2D Width- & Height-Adjustable T-Arms P 3D Width- & Height-Adjustable T-Arms with Pivot Arm Cap Shrinx Mesh Back S2 Ebony Seat Upholstery Finish Fabric Cylinder Style 1 Standard 2 High 3 Low Plastic Outer Frame Finish 8B Ebony 40 SAMPLE ORDER CODE NPRT N P S2 X720 1 8B 40 PRODUCT OPTIONS CONTINUED 40 40 8B Ebony Plastic Inner Frame Finish 8B Plastic Lumbar Element Finish Ebony Base Finish 52 Ebony C9 Polished Aluminum Casters/Glides A Casters, Soft B Glides, Hard C Glides, Soft Y Casters, Hard Assembly Style N Not Fully Assembled 40 SAMPLE ORDER CODE CONTINUED 8B 8B 52 Y N See pricing on following page. 40 40 40
N P R T Projek Synchro-Tilt Task Chair (Continued) DESCRIPTION PRICE COM/ Grade 1 Grade 2 COL Grade 4 Grade 5 Grade 9 Leather LA NO HEADREST (N) No Arms 719 738 757 776 795 870 936 Fixed Arms 798 817 836 855 874 949 1015 2D Width, Height-Adjustable T-Arms 823 842 861 880 899 974 1040 3D Width, Height-Adjustable T-Arms w/ Pivot Arm Cap 873 892 911 930 949 1024 1090 If Polished Aluminum (C9) Base is specified add 45 If Soft Casters (A) are specified add 16 If Hard Glides (B) are specified add 16 If Soft Glides (C) are specified add 27 41 41 41 41 41 41 41 41 41 41 41 41 41 41
42 42 42 42 42 42 42 42 42 42 42 42 42 42
savera overview Savera, classic form with comfort and performance at an exceptionally affordable price. Savera chairs have been designed and tested for users weighing up to 275 lbs (Swivel Tilt Task and Stool), 300 lbs (Synchro-tilt Task), 350 lbs (Guest) and 400 lbs (Savera XL) Savera chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could result in unexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer for appropriate selection Task Chair with Synchro-tilt shown 43 43 43 Outer Back is Plastic Lumbar Apex Height Adjustment of 70mm 43 Clearance between armrests: 521 or 584mm Arm Height Adjustment 2D 102mm 4D 121mm 43 Standard Seat Height Adjustment of 102mm 43 Tension Control Back-Tilt (Not shown) Seat Depth Adjustment of 51mm Total Arm Width Adjustment 2D 38mm 4D 102mm Five Star Base 60mm Heavy Duty Synchro-Tilt Mechanism Tension Control 43 43 SAVERA XL Seat Height Adjustment of 102mm 60mm Hard Casters are standard Heavy Duty Five Star Base 43 43 43 Statement of Line 43 43 Mid-Back No Arms Mid-Back Fixed T-Arms Mid-Back 2D Arms High-Back No Arms High-Back Fixed T-Arms High-Back 2D Arms 43
savera dimensions & material requirements Dimensions WEIGHT 44 General Use/Task Stool Executive/XL 40 lbs 41 lbs 64 lbs 44 Width Between Arms Fixed T-Arms 483mm 2D 451-527mm 44 Back Width Task 432mm 44 44 Arm Height from Seat Fixed T-Arms 197mm 2D 172-273mm Lumbar Apex Height Task 165-235mm Back Height from Seat Task Mid-Back 508mm Task High-Back 660mm Angle between Seat and Back Task 97 44 44 Overall Height Task Mid-Back 800mm Task High-Back 902mm Seat Height from Floor Task Standard 375-476mm Task High 406-533mm Task Low 343-406mm 44 44 44 Seat Width Task 451mm Overall Width Task 762mm Overall Depth Task 762mm Seat Depth Task 419-470mm General Use 432mm 44 44 44 COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. SINGLE UPHOLSTERED DUAL UPHOLSTERED SEAT DUAL UPHOLSTERED BACK COM COL COM COL COM COL [yards] [sq. ft] [yards] [sq. ft] [yards] [sq. ft] Mid-Back 1 9 1 6 3/4 4 High-Back 1 11 1/2 1 8 1 7 1/2 44
savera adjustment features & instructions BACK TILT ADJUSTMENT TENSION CONTROL LUMBAR HEIGHT ADJUSTMENT 45 45 SYNCHRO-TILT TASK: The tilt control paddle on the left locks the chair into four different positions. To tilt the chair, sit in the chair and unlock the paddle by pushing it down, which will release the back to free flow. To lock in position, pull the paddle up and the back will lock in position. SYNCHRO-TILT TASK: The tension-adjustment wheel for the synchro tilt Task chair is located on the right. Leaning back, decide if the resistance of the chair is comfortable. If it is too stiff, turn the tension adjustment knob counter-clockwise. If the chair back does not provide enough resistance, turn the knob clockwise. The lumbar height-adjustment levers for Savera Synchro-Tilt are found at the sides of the chair. Pull levers up or down to the desired position. 45 SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT ARM WIDTH ADJUSTMENT 45 45 45 The seat height-adjustment paddle for Savera Synchro-Tilt is located underneath the seat on the right side. To raise the chair, lift the paddle up, while lifting your weight from the seat, until you reach the desired height, then release. To lower the chair, lift the paddle up, allowing your weight to push the seat down until you reach the desired height, then release. To adjust the seat depth, lift lever up. Simultaneously lift your weight from the seat while sliding the seat forward or backward. Release the lever to lock the seat in place. To adjust the arm width on Savera Synchro-Tilt push the lever down and slide the arm to the desired postition. Push the lever up to lock the arm in place. 45 45 ARM HEIGHT ADJUSTMENT 45 45 2D ARMS: To adjust the arm height on Savera Synchro-Tilt lift the small button on the outside of either arm to raise or lower it to the desired position. 45 45 45 45
46 46 N S A Y Savera Synchro-Tilt Task Chair 2D Arm 4D Arm Fixed T-Arm FEATURES Standard pneumatic cylinder provides height adjustment of 102mm Seat depth adjustment of 51mm Lumbar height adjustment of 70mm Back-tilt can be locked in four positions or left free flow Frame, five star base and outerback are plastic Synchro-tilt 3:1 ratio Tension control Hard casters are standard and are well suited for soft flooring such as carpeting Soft casters are available for use on hard flooring, such as wood, concrete, or tile NOTES Single Upholstered: The same fabric is applied to the seat and inside back. Dual Upholstered: Two different fabrics are applied to the chair, one fabric to the seat and the other fabric to the inside back. First fabric listed will apply to the back and is the grade of fabric used to price the chair. A dual upholstery upcharge applies. 46 46 PRODUCT OPTIONS Size F Mid-Back H High-Back Mechanism Style 1 Standard Arm Style N No Arms F Fixed T-Arms W 2D Height & Width-Adj. T-Arms Upholstery Style P Single Upholstered D Dual Upholstered Back Upholstery Finish Fabric Leather Fabric Leather Seat Upholstery Finish (For Dual) 46 46 SAMPLE ORDER CODE NSAY F 1 W P X721 46 PRODUCT OPTIONS CONTINUED 46 46 Seat Depth Adjustment N No Seat Depth Adjustment S With Seat Depth Adjustment 1 Standard 2 High 3 Low Cylinder Style Frame & Base Finish E Ebony Casters/Glides (Optional) Y Casters, Hard A Casters, Soft B Glides, Hard C Glides, Soft Other Options N Not Fully Assembled F Fully Assembled 46 46 SAMPLE ORDER CODE CONTINUED S 1 E Y N See pricing on following page. 46 46 46
N S A Y Savera Synchro-Tilt Task Chair (Continued) DESCRIPTION PRICE COM/ COL/ Leather LA/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 MID-BACK (F) No Arms 588 614 640 667 691 717 743 769 796 886 Fixed T-Arms 675 701 727 753 778 804 830 856 883 973 2D Height & Width-Adjustable T-Arms 701 727 753 779 804 830 856 883 909 999 HIGH-BACK (H) No Arms 611 637 661 688 714 740 766 792 819 909 Fixed T-Arms 698 723 748 775 801 827 853 879 906 996 2D Height & Width-Adjustable T-Arms 723 750 775 801 827 853 879 906 932 1022 If Dual Upholstered (D) is specified add 165 If Seat Depth Adjustment (S) is specified add 54 If Soft Casters (A) are specified add 17 If Hard Glides (B) are specified add 17 If Soft Glides (C) are specified add 28 If Fully Assembled (F) is specified add 4 47 47 47 47 47 47 47 47 47 47 47 47 47 47
nami overview Overview Nami chairs have been designed and tested for users weighing up to 250 lbs. 48 48 48 One Piece Shell 48 Integrated Arms 48 48 Cantilever Frame Ebony or Chrome Finish 48 48 Statement of Line 48 48 48 Stacking Guest Chair Cantilever Frame No Arms Stacking Guest Chair Cantilever Frame Integrated Arms with Bookrack * Ganging Device and Dolly also available with Tablet * Ganging Device and Dolly also available 48 48 48
nami dimensions Dimensions WEIGHT Bar Stool 20 lbs Counter Stool 19 lbs Chair 17 lbs 49 Width Between Arms 508mm 49 Back Width 406mm Seat Depth 413mm Angle between Seat and Back 101 49 49 Guest Chair Lumbar Apex Height 229mm Back Height from Seat 356mm 49 49 Seat Height from Floor Counter 610mm Arm Height from Floor 635mm Seat Width 432mm Overall Height 813mm Seat Height from Floor Chair 457mm 49 49 Overall Width (Chair & Stools) With Integrated Arms 584mm No Arms 521mm With Tablet 635mm Overall Depth (Chair & Stools) 559mm With Tablet 572mm With Tablet Extended 762mm 49 Other Dimensions Dolly Dimensions x 102cm d x 130cm h x 64cm w Dolly Dimensions with 20 stacked chairs 102mm d x 188cm h x 64cm w Tablet Dimensions 45cm d x 43cm w Bookrack Dimensions 40cm d 25cm x 30cm w 49 49 49 49 49
50 50 N N A C Nami Stacking Guest Chair FEATURES Stacks 20 high on the dolly Stacks 8 high on the floor Ganging device can gang any combination of arm option (including tablet arm) Multi-surface glides NOTES Tablet can only be specified on chairs with arms. Tablet is standard on the right and finished in Ebony. When Tablet is specified, chair is no longer stackable. When With Ganging (G) is selected, a ganging device is included to connect two chairs. 50 PRODUCT OPTIONS Frame Style Arm Style Frame Finish Shell Finish Tablet Option (If Applicable) Other Options 50 50 C Sled N No Arms K Integrated Arms with Caps (Shown) 52 Ebony C6 Chrome 7F Ebony 7P Lunar Grey 7A Fearless Red 7Y Storm White 6D Dark Taupe 7H Light Grey 7K Deep Ocean N No Tablet (Shown) T With Tablet N No Ganging G With Ganging 50 SAMPLE ORDER CODE NNAC C K 52 7F N G 50 DESCRIPTION PRICE 50 50 No Arms 294 Integrated Arms 396 If Chrome Finish (C6) is specified add 91 If Tablet (T) is specified add 158 If Ganging Device (G) is specified add 57 50 50 50 50 50
FEATURES Ganging Device can gang any combination of arm option (including tablet arm) Hard casters are standard on the Dolly NOTES The Ganging Device is used to attach two Nami Stacking Chairs (NNAC) that were not previously ordered with the Ganging option. Bookrack must be field installed. Tablet is finished in Ebony. N N A Nami Chair Accessories Dolly will hold 20 Nami Chairs (NNAC) without Tablet Arm. Dolly Bookrack 51 Tablet Ganging Device 51 PRODUCT OPTIONS Accessories Bookrack Finish (If applicable) 51 G Ganging Device B Bookrack T Tablet W Dolly 52 Ebony C6 Chrome 51 51 SAMPLE ORDER CODE NNA B 52 51 DESCRIPTION PRICE 51 Ganging Device 57 Bookrack 80 Tablet 158 Dolly 339 51 51 51 51 51 51 51
volume overview Overview Volume chairs have been designed and tested for users weighing up to 250 lbs. 52 52 52 52 52 52 Steel Frame 52 Plastic Glides 52 52 52 52 Statement of Line 52 52 Stacking Chair No Arms With Tablet (right-handed) With Tablet (left-handed) With Bookrack * Ganging Device, Upholstered Seat and Dolly also available With Tablet (right-handed) & Bookrack With Tablet (left-handed) & Bookrack 52
volume dimensions & material requirements Dimensions WEIGHT Chair 15 lbs 53 Back Width 46mm 53 Seat to Back Angle 94 53 Lumbar Apex Height 22mm Overall Height 83mm Back Height from Seat 43mm Seat Height from Floor 48mm 53 53 53 Seat Width 46mm Overall Width 50mm With tablet 58mm Seat Depth 43mm Overall Depth 55mm With tablet 70mm 53 53 Other Dimensions Dolly Dimensions 102cm d x 64cm w x 89cm h Dolly Dimensions with 35 stacked plastic chairs or 25 stacked upholstered chairs 193cm h x 64cm w x 107cm d Tablet Dimensions 45cm d x 43cm w Bookrack Dimensions 30cm w x 36cm l 53 53 COM/COL Material Requirement More yardage may be required depending upon the pattern repeat and the matching required. Leather yield may be affected by the quality of the COL. However, variance in the size of the hides will not affect the yield. SEAT UPHOLSTERY COM COL [yards] [sq. ft] Medium 3/4 6 1/2 53 53 53 53
54 N H D S Volume Stacking Chair FEATURES Non upholstered chairs stack 35 high on the dolly and 10 high on the floor Upholstered chairs stack 25 high on the dolly and 8 high on the floor NOTES When Tablet Arm is specified, chair is no longer stackable. When Bookrack is specified, chair is no longer stackable. Tablet surface is finished in Ebony and frame is finished in Chrome. Bookrack is finished in Chrome frame with Ebony plastic shelf details. 54 54 54 54 54 PRODUCT OPTIONS Arm Style Upholstered/Seat Style N No Arms U Upholstered N Not Upholstered Back Finish 7F Ebony 7Y Storm White 7E Espresso 7L Latte 6H Meduim Grey 7H Light Grey 7J Solar Yellow 7K Deep Ocean 7N Crimson Seat Finish 7F Ebony 7Y Storm White 7E Espresso 7L Latte 6H Meduim Grey 7H Light Grey 7J Solar Yellow 7K Deep Ocean 7N Crimson Upholstery Finish (If applicable) Fabric Frame Finish C Chrome Bookrack N No Bookrack B With Bookrack Tablet Arm N No Tablet Arm R With Tablet Arm (righthanded) L With Tablet Arm (lefthanded) 54 54 54 SAMPLE ORDER CODE NHDS N U 7F 7E X720 C B R DESCRIPTION PRICE COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 Not Upholstered Seat 175 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a Upholstered Seat n/a 259 278 299 318 337 356 376 395 415 482 If Bookrack (B) is specified add 79 If Tablet Arm (R) or (L) is specified add 136 54 54 54 54 54
FEATURES Hard casters are standard on the Dolly NOTES Bookrack and Tablet Arm must be field installed. Dolly will hold 35 non upholstered Volume chairs (NHDS) without Tablet Arm or Bookrack. Dolly will hold 25 upholstered Volume chairs (NHDS) without Tablet Arm or Bookrack. Tablet surface is finished in Ebony and frame is finished in Chrome. Bookrack is finished in Chrome frame with Ebony plastic shelf details. Ganging Device ships in quantities of 10. N H D Volume Chair Accessories Dolly Bookrack 55 55 PRODUCT OPTIONS Accessories Tablet (right or lefthanded) Ganging Device 55 B Bookrack G Ganging Device R Tablet (right-handed) L Tablet (left-handed) W Dolly (for non-upholstered chair) 55 55 SAMPLE ORDER CODE NHD G 55 DESCRIPTION PRICE 55 Bookrack 79 Ganging Device (quantity: 10) 57 Tablet (right or left-handed) 136 Dolly 345 55 55 55 55 55 55 55
56 56 56 56 56 56 56 56 56 56 56 56 56 56
fabrics T E K N I O N FA B R I C S................................. 5 8 M A L AY S I A FA B R I C................................. 6 0 57
fabrics T E K N I O N S T A N D A R D U P H O L S T E R Y F A B R I C S 58 58 58 58 58 58 58 58 58 58 58 58 58 FUNDAMENTALS GRADE 1 Banner E505 Gris E531 Latte E535 Brier E518 Dove E532 Light Grey E522 Sudan E519 Vanilla E524 Verde E528 Nickel E533 Forsythia E525 Parakeet E516 Slate E534 Tangelo E526 Aqua E529 Armory E521 Salsa E504 Azure E530 Black E523 Fushia E527 Wendigo E520 ARIZONA GRADE 2 Tempe A120 Phoenix A101 Tucson A102 Espresso A118 Sedona A122 Chandler A121 Mesa A105 DURABLE (VINYL) Oxford V101 Pearl Grey V102 Charcoal V103 Black V104 Medium Neutral V105 Brown V106 Elephant V107 Burgundy Dark Blue Pine Mountain White Bisque Nu-Red Cadet White Sand Canary Sahara Spice Paprika Cocoa Casablanca Vineyard Tangier Atlantic Onyx MIAMI Aventura Liberty City Doral South Beach Downtown Boardwalk Pinecrest Dade Coral Gables Wynwood Homestead BEADED STRIPE Snapdragon-Beaded Vine-Beaded Espresso-Beaded Olive-Beaded Peacock-Beaded Pomegranate-Beaded Latte-Beaded V109 V110 V111 V125 V126 V127 V128 V150 V151 V152 V153 V154 V155 V156 V157 V158 V159 V160 M525 M526 M533 M529 M532 M531 M530 M524 M528 M522 M523 P490 P491 P492 P493 P494 P495 P496 DIAMOND TECH Blue Night-Tech Patina-Tech Bronze-Tech Espresso-Tech Fire-Tech Flame-Tech Ochre-Tech Danube-Tech Aspen-Tech Pool-Tech TEXTURED BAND ULTRA DURABLE (VINYL) Aristo - White Water Aristo - Sisal Aristo - Baked Pottery Aristo - Vapor Aristo - Nirvana Aristo - Tiger Eye Aristo - Laurel Aristo - Silhouette Vitality - Mohair Vitality - Vanilla Vitality - Iced Coffee Vitality - Hershey Vitality - Tungsten Vitality - Hot Spring Vitality - Parrot Vitality - Black Velvet Verve - Mist Verve - Cafe Verve - Chrome Verve - Polished Metal Verve - Jet Set P460 P461 P462 P463 P464 P465 P466 P467 P468 P469 V163 V164 V165 V166 V167 V168 V169 V170 V180 V181 V182 V183 V184 V185 V186 V187 V188 V189 V190 V191 V192 Coffee V108 58
fabrics T E K N I O N S T A N D A R D U P H O L S T E R Y F A B R I C S CROSS DYE Earl Grey C120 Linen C121 Light Birch C122 Almond C123 Soft Shadow C124 Ace Grey C125 Cool Ash C126 Carotene C127 Crimson C128 Carmine C129 Tea Tree C130 Artichoke C131 Plum C132 Watercolor C133 Azure C134 Logwood C135 MARL CLOTH Yurt F314 Guy Rope F315 Cabana F316 Camp Fire F317 Dry Stone F318 Wilderness F319 Berry F320 Blacksmith F321 Sea Nomad F322 Wild Fruit F323 SATURATE GRADE 4 Quarry S610 Cotton S611 Oyster S612 Dune S613 Sepia S614 Chestnut S615 Sable S616 Titanium S617 Claret S618 Dark Lavender S619 Noir S620 VELVET UNDERGROUND Metal Machine V310 Cold Weld V300 Unplugged V311 Powder Coat V301 Factory Grey V312 Ore V302 Flame Desire V313 Coinsmith V303 Concrete V314 Electric V304 Blue Denim V315 Metallurgy V305 Pewter Pulp V316 Iron V306 Dark Moon V317 LEATHER LA Blacktop V318 Shale L101 BOUCLE GRID GRADE 5 Moon Rock B112 Perforated Black L109 Boll B113 Oyster L202 Tumbleweed B114 Nutmeg L203 Buffalo Mane B115 Chocolate L204 Igneous B116 Chime L205 Ash Cloud B117 Fossil L206 Briquette B118 Lagoon L207 FULL WOOL GRADE 9 Fantasme F206 Yolk L209 Blanc F207 Poppy L210 Dune F208 Parlor L211 Hot Stone F209 Marine L212 Eclair F210 Ivory L213 Macchiato F211 Buttercup L214 Hat Trick F212 White L215 Peridot F213 Tigerlily F214 Fresh Water F215 Serpent F216 Spice F217 Neptune F218 Safari F219 Vintage Red F220 BONDED Black L104 Shutter L208 Lagoon F221 Oak Room F222 Deep Orchid F223 59 59 59 59 59 59 59 59 59 59 59 59 59 59
fabrics M A L A Y S I A S T A N D A R D U P H O L S T E R Y F A B R I C S 60 GRADIENT GRADE 1 Cinereous X720 GEMSTONE GRADE 1 (ONLY AVAILABLE FOR KRYSTAL) PHILOMINA (ONLY AVAILABLE FOR MINA) GRADE AA Slate Grey X721 Grey Quartz F301 Black SP01 60 Rich Black Grey Grey X722 X723 Mandarin Garnet Lolite F303 F304 Red Tangerine SP02 SP03 Malze X724 Black Onyx F306 Sapphire SP06 60 American Rose Asparagus X725 X726 Demantoid Yellow Tourmaline F307 F308 Hops Olie SP10 SP11 Olive Drab X727 Moonstone F401 Pearl Grey SP16 60 Pinie Green Teal X728 X729 *Black Crystal Rubellite F402 F403 Cork *Black Mesh K30A SP17 SP04 Baby Blue X730 Tanzanite F404 60 Steel Blue Eggplant X731 X732 Black Sapphire Peridot F406 F407 Denim X733 Fire Opal F409 60 Duke Blue Persimmon X734 X735 Sinopia X736 60 Chestnut Burgundy X737 X738 Fallow X739 60 Bistre Old Gold X740 X741 Copper X742 60 Dark Taupe X743 60 60 60 60 60 * Applicable to back only
Teknion www.teknion.com TEKNION CORPORATION IN CANADA: 1150 FLINT ROAD TORONTO, ONTARIO M3J 2J5 CANADA TEL 866.TEKNION 866.835.6466 FAX 416.661.4586 IN THE USA: 350 FELLOWSHIP ROAD MT LAUREL, NEW JERSEY 08054 USA TEL 877.TEKNION 877.835.6466 FAX 856.552.5088 OTHER OFFICES LOCATED IN: EUROPE SOUTH AND CENTRAL AMERICA MIDDLE EAST ASIA RUSSIA FOR REGIONAL CONTACT INFORMATION GO TO www.teknion.com TEKNION EMBRACES CHANGE AND ITS INNATE POSSIBILITIES. OUR CULTURE IS ONE OF INNOVATION. IN THAT SPIRIT, WE HAVE STEPPED FORWARD TO INTEGRATE SUSTAINABLE PRINCIPLES AND PRACTICES INTO THE DESIGN, MANUFACTURING AND MARKETING OF OUR PRODUCTS. TEKNION PRODUCTS PERFORM INDEPENDENTLY AND IN CONCERT, COMBINING IN VIRTUALLY UNLIMITED CONFIGURATIONS. OUR PHILOSOPHY EMBRACES DESIGN AS ONE OF THE BEST TOOLS WE HAVE FOR REALIZING THE BENEFITS OF BUSINESS, WHILE ALSO STRIVING TO REACH SUSTAINABLE GOALS. WE HAVE LEARNED FROM DESIGN THAT CHANGING A SINGLE DETAIL ALTERS THE WHOLE. EVERY INCH MAKES A DIFFERENCE. EVERY LEAP IS THE SUM OF MANY SMALL STEPS. TEKNION CREATES FURNITURE THAT CONNECTS PEOPLE, TECHNOLOGY AND SPACES; INTEGRATED DESIGN WITH NEW POSSIBILITIES FOR A HEALTHY, PRODUCTIVE WORLD TOMORROW AND THE DAY AFTER. 02 TEKNION 2015, TRADE MARKS OF TEKNION CORPORATION AND/OR ITS SUBSIDIARIES OR LICENSED TO IT. PATENTS MAY BE PENDING. SOME PRODUCTS MAY NOT BE AVAILABLE IN ALL MARKETS. CONTACT YOUR LOCAL TEKNION REPRESENTATIVE FOR AVAILABILITY. PRINTED IN CANADA