Adams Rite Architectural Hardware 2014 PRICE LIST Prices effective March 1, 2014 adamsrite.com
4 LIMITED WARRANTY Limited Warranty Products sold under the Adams Rite brand in the United States of America are warranted free from defects in workmanship and materials under normal use and service. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-adams Rite products or parts. This warranty is void if any modification is made to the product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk of the party making the modification. Should any defect of manufacture (in material or workmanship) occur in its products, Adams Rite, upon prompt notification and proof to its satisfaction that the product was defective in manufacture for the use intended by Adams Rite, will at its option, exchange the product, repair the product, or refund the price charged by Adams Rite, FOB factory within the stated time frame listed below. All mechanical products for five (5) years from date of manufacture Ultraline 7400 Electric Strikes for five (5) years from date of manufacture All electrical products for three (3) years from date of manufacture, with the exception of the exit devices with the SE option SE option on exit devices: for optimal performance Adams Rite requires that all exit devices with the SE option be installed and powered using Adams Rite PS-SE power supplies. Failure to do so may cause permanent damage to the exit device and will void the manufacturer s warranty. When installed with PS-SE power supplies, SE exit devices are under warranty for three (3) years. GENERAL PROCEDURE Product repair or replacement, or associated charges, will not be accepted under this warranty unless prior authorization from Adams Rite has been given. Upon receipt of products returned for repair or replacement, we will determine whether products qualify for repair or replacement under this warranty. If they do not, we will obtain authorization prior to proceeding. We have no liability to pay any costs of repair performed by anyone other than qualified personnel authorized by Adams Rite prior to the work being done. Adams Rite will not pay for the cost of repair performed other than in accordance with this warranty. Written notice of a product or component part believed to be defective as covered by this warranty should be sent to Adams Rite, 10027 S. 51st Street, Suite 102, or CustomerCare@assaabloyems.com and should include your name and address, the original PO number, an identification of the product or component part and a brief description of the defect. Upon receipt of such notice, Adams Rite will inform you where to ship such product or component part, and, in the event such examination reveals a defect covered by this warranty, Adams Rite will, at its option repair or replace the product. You are responsible for the cost of sending the product back to Adams Rite. Adams Rite will pay for the outbound replacement shipment. Merchandise ordered in error by the customer is subject to a minimum 35% restocking charge if returned within 90 days of receipt. Merchandise returned 90-120 days from receipt is subject to a 50% restocking charge. Credit will not be allowed on items held for longer than 120 days. Return Material Authorizations (RMAs) will be closed if the goods are not received within 60 days of issuance. CANCELLATION As an industry leader, Adams Rite is committed to maintaining the highest standard of quality and ensuring strict compliance to industry codes. The Adams Rite brand s proud history of customer service and manufacturing agility allow quick response times to customer s changing needs, which sometimes means special orders or product modifications. Please be advised that all product modifications require special authorization to ensure the order fully meets customer s expectations. Customers are asked to allow for an extended lead time on all special orders. Please note that at Adams Rite s option, product modifications and other special orders cannot be changed, cancelled, or returned once a ship date has been provided on an order acknowledgement by Adams Rite.
HOW TO ORDER 5 Adams Rite prides itself on introducing new, industry-relevant, feature-rich products. Since new solutions will surpass the capabilities of older product lines, sometimes these historical products may be subsequently discontinued. Every effort will be made to announce new product introductions as well as product discontinuations in a manner that allows customers advanced notice of these events. Once a product line is discontinued orders will be fulfilled in order of receipt, although Adams Rite cannot guarantee all orders can be filled. Repair services and spare parts for discontinued product lines will be available for some reasonable time period. Adams Rite reserves the right to replace discontinued product with an equivalent product as deemed by Adams Rite. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. ADAMS RITE IS A DIVISION OF HANCHETT ENTRY SYSTEMS, INC. HANCHETT ENTRY SYSTEMS, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Glossary of Terms Backset: The horizontal dimension from the front of the faceplate to the center of the cylinder. Cam: The part on the back of a cylinder that rotates when the key is turned, and operates the lock mechanism. Deadbolt: A lockbolt having no spring action. Usually rectangular and actuated by cylinder or thumbturn. Deadlatch: A lock with a radiused or bevelled spring-loaded latchbolt which may be automatically or manually locked against unauthorized retraction and will self latch when the door returns to the closed position. Dogging: The means of retaining the lockbolt or exit device mechanism in the open position to allow the door to be free swinging. Escutcheon: An ornamental or protective plate that is fixed to the stile of the door and slips over the cylinder, thumbturn, handle or similar. Exit Device: A horizontal bar running at least two-thirds of the width of the door leaf, where pressure on the bar releases the locking arrangement. Keyed Alike (KA): All cylinders may be operated by the same key. Keyed Different (KD): Different keys operate each cylinder or group of cylinders. Latchbolt: A bevelled or radius bolt which operates on a spring return so that the lock may self-lock. Schoolhouse Function: The inside operation of the deadlock is limited to unlocking only. The lock is modified to prevent someone (like a student) from locking up the classroom, usually with a thumbturn, from the inside. Solenoid: A device that when energized with electrical current, develops a magnetic pull motion enabling mechanical work to be effected (such as plunger movement that releases the blocking arm on electric strikes).
6 TABLE OF CONTENTS General Information Adams Rite Limited Warranty/Terms and Conditions 4-5 Glossary of Terms 5 Table of Contents 6-7 PIVOTS B1921, B1923 Reinforcing Pivots 16 Products DEADLOCKS RT1050D RITE Touch Digital Glass Door Lock 8 1830 Bottom Rail Deadlock(Swingbolt) 8 MS1837 Series MS Two-Point Deadlock 8 MS1847 Series MS Deadlock 8 MS1850S Series MS Deadlock 9 MS1850S-050 Series MS Deadlock 9 MS1850SN Series MS Deadlock (ANSI Size) 9 MS1850SN-050 Series MS Deadlock (ANSI Size) 9 MS1861 Series MS Bottom Rail Deadlock 9 1875 Two-Point Deadlock 10 MS+1890 Series MS Deadlock/Deadlacth 10 MS1950 Series MS Deadlock 10 MS1950-050 Series MS Deadlock 10 2190 Dual Force Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors 11 2290 Dual Force Interconnected Deadbolt/Deadlatch for Stile and Rail Wood or Hollow Metal Doors 11 2331 Heavy Duty Deadbolt 12 4070 Series Short Throw Deadbolt (Projection Style) 12 4189, 4190 Flush Locksets (Including Deadlock) 12 4430, 4431 Flush Locksets (Including Deadlock) 12 5017 Wood Door Deadbolt 12 EXIT DEVICES 8099 Dummy Pushbar 17 3100, 8100 Surface Vertical Rod Exit Device 17 8200 Narrow Stile Surface Vertical Rod Exit Device 17 3300, 8300 Mortise Exit Device 17-18 8400 Narrow Stile Mortise Exit Device 18 3600, 8500 Metal Door Concealed Vertical Rod Exit Device 18 8600 Narrow Stile Concealed Vertical Rod Exit Device 19 3700, 8700 Rim Exit Device 19 8800 Narrow Stile Rim Exit Device 19 3900, 8900 Wood Door Concealed Vertical Rod Exit Device 19 OPTIONS FOR EXIT DEVICES 20 KITTED OPTIONS FOR EXIT DEVICES 20 MODIFICATION OPTIONS FOR EXIT DEVICES 20 ELECTRIC STRIKES 7100 Series Electric Strikes 21 7100 Series Electric Strikes Components 21-22 7200 Series Fire-Rated Electric Strikes 22 7400 Series Electric Strikes 22-23 7400 Series Electric Strikes Components 23-24 TRIM DEADLATCHES 4300 Electrified Deadlatch (elatch) Steel Hawk 13 4300 RITE Pack 13 4510 Standard Duty Deadlatch 13 4530 Standard Duty Deadlatch 14 4900 Heavy Duty Deadlatch 14 4920AN Heavy Duty Deadlatch (ANSI Size) 14 FLUSHBOLTS 1870 Cylinder-Operated Flushbolt 15 1870HM Cylinder-Operated Flushbolt 15 1877 Cylinder-Operated Flushbolt 15 MS1880, MS1881 Two-Point Flushbolts 15 MS2180 Auto-Release Two-Point Flushbolt 15 4781 Two-Point Deadlatch with Paddle 16 1000 Series Turns 24 3000 Fixed Pull 24 3080 Series Entry Trim 25 3090 Keyless Entry eforce -150 25 A100-3090H Keyless Entry and Aperio Hub Wholesale Kit 26 4060 Turn 26 4550 MS Deadlock Lever 26 4560, 4565 Series Deadlatch Handles for 4300, 4500, 4900 26 4560-010, 4565-010 Series Deadlatch Handles for MS+1890 26-27 4568, 4569 Eurostyle Deadlatch Handles 27 4568-010, 4569-010 Series Deadlatch Handles for MS+1890 27 4590 Deadlatch Paddle for 4300, 4500, 4900 27 4590-1X Deadlatch Paddle for MS+1890, 2190 28 4591 Deadlatch Paddle for 4300, 4500, 4900 28 4591-1X Deadlatch Paddle for MS+1890, 2190 28 4600 Heavy Duty Designer Deadlatch Handle 29
TABLE OF CONTENTS 7 CYLINDERS 4024, 4025, 4029 Cylinder Pulls 29-30 4036 Mortise Cylinder 30 MS4043 Cylinder Guard 30 4066 Thumbturn Cylinder 30 4580 Cam Disc 30 4581 Universal Cam Disc 31 8650 Cylinder Escutcheon Kit 31 8736 Rim Cylinder 31 ACCESSORIES 2190 Dual Force Interconnected Deadbolt/Deadlatch Strikes 31 2290 Dual Force Interconnected Deadbolt/Deadlatch Strikes 32 4000 Series MS Deadlock Strikes 32 4014 Two-Point Conversion Kit 32 4015 Threshold Bolt 32 4016 Header Bolt 33 4085 Header Bolt (Pairs of Doors Only) 33 4089 Exit Indicator 33 4104 Mounting Bridges 33 4800, MS 4804 Series Strikes 33 Deadlatch Strikes 34 91-0965 Universal Mounting Tab Kits for Installing MS Locks & Latches 34 MS1880, MS1881 Two-Point Flushbolts 34 THICK DOOR KITS 2190, 2290 Dual Force Interconnected Deadbolt/Deadlatch Thick Door Kit 34 4568, 4569 Eurostyle Deadlatch Handles Thick Door Kits 34 4568-010, 4569-010 Eurostyle Deadlatch Handles Thick Door Kits 34 FACEPLATES MS1850S, MS1850A, MS1950 Deadlocks (Long Throw) Faceplates 35 MS1850S, MS1850A, MS1950 Deadlocks (Hookbolt and Short Bolt) Faceplates 35 MS1850S Deadlocks Faceplates 35 MS1850SN Deadlocks (Long Throw) Faceplates 35 MS1850SN Deadlocks (Hookbolt) Faceplates 35-36 1870 Flushbolt Faceplates 36 MS+1890 Deadlock Faceplates 36 2331 Heavy Duty Deadbolt Faceplates 36 3300 Fire-Rated Mortise Exit Device Faceplates 36 4070 Short Throw Deadbolt Faceplates 37 4500 Standard Duty Deadlatch Faceplates 37 4530 Standard Duty Deadlatch Faceplates 37 4900 Heavy Duty Deadlatch Faceplates 37 4900 Heavy Duty Deadlatch Special Faceplates 37 4920, 8300 Faceplates 38 7100, 7160 Electric Strikes Faceplates 38 7101 Electric Strikes Faceplates 38 7110 Electric Strikes Faceplates 38 7111 Electric Strikes Faceplates 38 7130 Electric Strikes Faceplates 38 7131 Electric Strikes Faceplates 38 7140, 7170 Electric Strikes Faceplates 38 POWER 4612 Power Transfer Device 39 PS-1 Power Supply 39 PS-LR Power Supply 39 PS-SE Power Supply 39 4603, 4605, 4606 Transformer/Rectifier/Plezo Horn 39
8 DEADLOCKS DEADLOCKS How to Order DEADLOCKS Below is an example of how to order an Adams Rite deadlock. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order related products separately. MS1850S Series MS Deadlock MS185 0S -3 10-628 FACEPLATE BACKSET HANDING FINISH Faceplate shape requirements will vary based upon application. Specify the horizontal dimension from the front of the faceplate to the center of the cylinder. Specify handing of door. Specify finish. Please refer to catalog for complete finish offering. RT1050D RITE Touch Digital Glass Door Lock RT1050D Digital glass door lock for single or double doors RT-RCM1050 Remote control module RT-5C-1050 Extra cards (package of 5 cards) $575.00 $125.00 $58.00 1830 Bottom Rail Deadlock (Swingbolt) sw 1830 MODEL 1830 31/32", or 1-1/8" backset $126.00 MS1837 Series MS Two-Point Deadlock & FINISHES MS1837 Includes 4001-011 strike, 36" cylinder height MS1837 Includes 4001-011 strike, cylinder height other than 36" 313, 335, 628 605, 626 $224.00 $274.00 $270.00 $320.00 MS1847 Series MS Deadlock MODEL & FINISH 630 MS1847 Deadlock, stainless steel $54.00
DEADLOCKS 9 MS1850S MS1850S-050 Series MS Deadlock & BACKSETS 7/8" 31/32" 1-1/8" 1-1/2" MS1850S Flat faceplate, any handing, 313, 335, or 628 finish, without strike MS1851S Radius faceplate, any handing, 313, 335, or 628 finish, without strike MS1851SW Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, without strike MS1852S Bevel faceplate, any handing, 313, 335, or 628 finish, without strike Series MS Deadlock $76.00 $64.00 $64.00 $64.00 $76.00 $64.00 $64.00 $64.00 $78.00 $66.00 $66.00 $66.00 $76.00 $64.00 $64.00 $64.00 Schoolhouse function for above locks add $36 & BACKSETS 7/8" 31/32" 1-1/8" 1-1/2" MS1850S-X50 Flat faceplate, any handing, 313, 335, or 628 finish, without strike MS1851S-X50 Radius faceplate, any handing, 313, 335, or 628 finish, without strike MS1851SW-X50 Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, without strike MS1852S-X50 Bevel faceplate, any handing, 313, 335, or 628 finish, without strike $76.00 $64.00 $64.00 $64.00 $76.00 $64.00 $64.00 $64.00 $78.00 $66.00 $66.00 $66.00 $76.00 $64.00 $64.00 $64.00 MS1850SN MS1850SN-050 Series MS Deadlock (ANSI Size) MS1850SN Flat faceplate, any handing, 313, 335, or 628 finish, without strike MS1851SN Radius faceplate, any handing, 313, 335, or 628 finish, without strike MS1852SN Bevel faceplate, any handing, 313, 335, or 628 finish, without strike Series MS Deadlock (ANSI Size) MS1850SN-450 Flat faceplate, any handing, 313, 335, or 628 finish, without strike MS1851SN-450 Radius faceplate, any handing, 313, 335, or 628 finish, without strike MS1852SN-450 Bevel faceplate, any handing, 313, 335, or 628 finish, without strike $91.00 $91.00 $91.00 Schoolhouse function for above locks add $36 $91.00 $91.00 $91.00 MS1861 sw ms 1861 Series MS Bottom Rail Deadlock & FINISH 603 MS1861-01 One-point deadlock, vertical bolt operation only $132.00 MS1861-02 Two-point deadlock, horizontal and vertical operation $166.00
10 DEADLOCKS 1875 Two Point Deadlock MODEL & FINISH 603 1875 Two-point deadlock $162.00 MS+1890 MS1950 Series MS Deadlock/Deadlatch & FINISHES 628 313 335 MS+1890 Flat faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset MS+1891 Radius faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset MS+1891W Radius faceplate with weatherstrip, any handing, 31/32", 1-1/8", or 1-1/2" backset MS+1892 Bevel faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset MODEL MS+1893-IB Without faceplate and strike Series MS Deadlock $226.00 $231.00 $231.00 $226.00 $231.00 $231.00 $235.00 $240.00 $240.00 $226.00 $231.00 $231.00 $195.00 MS1950 Flat faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $118.00 MS1951 Radius faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $118.00 MS1951W Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $120.00 MS1952 Bevel faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $118.00 Schoolhouse function for above locks add $36 MS1950-050 Series MS Deadlock MS1950-X50 Flat faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset MS1951-X50 Radius faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset MS1951W-X50 Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset MS1952-X50 Bevel faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $118.00 $118.00 $120.00 $118.00
6.81 173.02 5.80 147.32 CYLINDER C L 8.120R 3.05 7-11/16 CYLINDER C L 1 5-25/32 1/8R 1.76 44.61 1.12 28.56 CAM TOLERANCE: +_.005 +_.13. 800 20.32. 182 4.62 CAM TOLERANCE: 3/16 25/32.146 3.72 INCHES MILLIMETERS Nominal, subject to tolerance extremes. 1.0 25.4 1.36 34.54.75 19.05.63 15.89 2.86 72.54 6.874 174.60.69 17.48 HOW BACKSET IS MEASURED CYLINDER C L FLAT RADIUS BEVEL INCHES Nominal, subject to tolerance extremes. 1 5/8 1/2 2-5/32 1-11/32 1-23/32 3/4 11/16 2-27/32 C L C L C L BACKSET 1-1/8 28.6 1-1/2 38.1 A 1.78 45.2 2.25 57.1 ARMORED FACEPLATE 1 x6-7/8 FLAT (INCLUDED) 24-0066-01 RADIUS (INCLUDED) 24-0066-02 RADIUS w/weatherstrip PART# 24-0066-03 BACKSET "A" "B" 3-3/16 1-1/8" 1-1/8 1-3/4 1-1/2" 1-1/2 2-1/8 HOW BACKSET IS MEASURED CYLINDER C L FLAT BEVEL 1-1/4 X 8" C L C L FLAT (INCLUDED) FPK-0066-0X-XXX 5.375 136.53 4.645 117.98 CUTOUT TOLERANCE: + 0.015 +0.38-0.000-0.0 MAXIMUM GAP DOOR TO JAMB: 0.125 (3.1).572 14.53 1.144 29.06 CUTOUT TOLERANCE: + 0.015 +0.38-0.000-0.0 MAXIMUM GAP DOOR TO JAMB: 1/8" C L OF LOCK AND STRIKE 4 7/8 4 1/8 1/8 3 3/8 1 1/4 BEVELED OR FLAT EDGE 1.010 25.65.236 5.99 C L OF CYLINDER BACKSET 8 1-1/4 1/8 BACKSET 6.88 5/8 C L OF LOCK C L OF STRIKE PLATE 1-1/4 2-1/8 4-3/16 1.250 31.75 1.594 40.49 4.200 106.68 DEADLOCKS 11 2190 Dual Force Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors & TRIM SETS 2190 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03) Cutout same as MS1850S 2190 Deadbolt plus holes for handle mounting Deadbolt/Deadlatch with flat/centerhung 4" or 4.5" strike, standard series handle designation (01, 02, 03) Stile Preparation For Clutched Exterior 2190 Trim Set Deadbolt/Deadlatch with flat or radius strike, Jamb Preparation designer series handle 2101 Strike designation (Covers and (MD previous cutout for MS Deadbolt) - Retrofits 4901 and 4501 strike preparations through MW) Cylinder Cam 2190 Series locks are operable by any standard 1-5/32" diameter mortise cylinder with special MS cam dimensioned as shown. Cylinders with MS cams can be readily obtained from most cylinder manufacturers. See page SW-37 for cylinder make and trim information. 2190 Deadbolt/Deadlatch with flat/centerhung 4" or 4.5" strike, designer series handle designation (MD through MW) EXTERIOR TRIM SET 10B, US32D US3, US4, US32 ELECTRIFIED EXTERIOR TRIM SET 10B, US32D US3, US4, US32 LOW PROFILE TRIM 10B, US32D US3, US4, US32 $554.00 $564.00 $704.00 $714.00 $459.00 $469.00 $568.00 $578.00 $718.00 $728.00 $473.00 $483.00 $595.00 $605.00 $745.00 $755.00 $500.00 $510.00 $609.00 $619.00 $759.00 $769.00 $514.00 $524.00 Latch/Lock, Cylinder & Lever & FINISHES Installation 628 313, 335 2190 BOXED LOCK Less lever trim, with adjustable faceplate and choice of strike (Option 1 or 2) EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim) $258.00 $265.00 $150.00 630 standard. Dark bronze/black strike to match selected faceplate finish 121, 119, add $7 2290 Dual Force Interconnected Deadbolt/Deadlatch for Stile and Rail Wood or Hollow Metal Doors & TRIM SETS 2290 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03) 2290 "B" "A" Deadbolt/Deadlatch with flat/centerhung 4" or Stile Preparation For Clutched Exterior 4.5" strike, standard Trim Set series handle designation (01, 02, 03) ARMORED FACEPLATE 2290 Cylinder Deadbolt/Deadlatch Cam with Jamb flat or radius strike, 2290 Series locks are operable by any Preparation standard 1-5/32" diameter mortise cylinder 2206 Strike with special MS cam dimensioned as shown. Cylinders with MS cams can be readily obtained designer from most cylinder manufacturers. series handle designation (MD See page SW-37 for cylinder make and trim information. through MW) 2290 Deadbolt/Deadlatch with flat/centerhung 4" or 4.5" strike, designer series handle designation Latch/Lock, Cylinder & Lever Installation (MD through MW) EXTERIOR TRIM SET 10B, US32D US3, US4, US32 ELECTRIFIED EXTERIOR TRIM SET 10B, US32D US3, US4, US32 LOW PROFILE TRIM 10B, US32D US3, US4, US32 $569.00 $579.00 $719.00 $729.00 $475.00 $485.00 $583.00 $593.00 $733.00 $743.00 $489.00 $499.00 $610.00 $620.00 $760.00 $770.00 $516.00 $526.00 $624.00 $634.00 $774.00 $784.00 $530.00 $540.00 & FINISHES 628 313, 335 US32D 2290 BOXED LOCK Less lever trim, with adjustable faceplate and standard strike EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim) US3, US4, US32 $258.00 $265.00 $274.00 $284.00 $150.00 630 standard. Dark bronze/black strike to match selected faceplate finish 121, 119, add $7
12 DEADLOCKS 2331 Heavy Duty Deadbolt MODEL & FINISHES 605, 625 626 2331 Deadlock and strike $290.00 $276.00 4070 Series Short Throw Deadbolt (Projection Style) & FINISHES 313, 335, 628 4070 Flat faceplate, 7/8", 31/32", or 1-1/8" backset 4071 Radius faceplate, 7/8", 31/32", or 1-1/8" backset 4072 Bevel faceplate, 7/8", 31/32", or 1-1/8" backset MODEL 4073 Without faceplate 4189, 4190 Flush Locksets (Including Deadlock) $152.00 $152.00 $152.00 $145.00 & FINISHES 119, 121, 130 WHT 4189-IB Flush lockset, individually boxed $88.00 $88.00 4190-IB Flush lockset, individually boxed with cylinder $117.00 $117.00 4195-IB Dummy flushset, individually boxed $58.00 $58.00 4430, 4431 Flush Locksets (Including Deadlock) & FINISH BLACK 4430-IB ABS flush lockset, individually boxed $60.00 4431-IB ABS flush lockset with cylinder, individually boxed $93.00 4432-IB ABS dummy flushset, individually boxed $26.00 Kitted Options & FINISHES GRAY 335 4413 Grip pull for use with 4189, 4190 $20.00 4453-02 Grip pull for use with 4430, 4431 $30.00 5017 Wood Door Deadlock & FINISH 630 5017-00 Stainless steel deadlock $53.00 5017-02 Self-latching deadlock $53.00
DEADLATCHES 13 DEADLATCHES How to Order DEADLATCHES Below is an example of how to order an Adams Rite deadlatch. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order related products separately. 4900 Heavy Duty Deadlatch 49 00-3 5-2 01-628 FACEPLATE BACKSET HANDING STRIKE SIZE Faceplate shape requirements will vary based upon application. Specify the horizontal dimension from the front of the faceplate to the center of the cylinder. Specify handing of door. Specify the size of the strike required. STRIKE SHAPE/LIP LENGTH Specify the shape of the strike required and lip length, where applicable. FACEPLATE FINISH Specify finish. Please refer to catalog for complete finish offering. 4300 Electrified Deadlatch (elatch) Steel Hawk MODEL & FINISHES 628 313, 335 4300 31/32", 1-1/8", or 1-1/2" backset 4300-M With monitoring "secure" indicator SPDT switch $384.00 $391.00 $439.00 $446.00 4300 RITE Pack 4300-20 31/32" backset, surface mount or mortise strike, 313 and 628 faceplates 4300-30 1-1/8" backset, surface mount or mortise strike, 313 and 628 faceplates $396.00 $396.00 4510 Standard Duty Deadlatch & FINISHES 628 313, 335 4510 Flat faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $71.00 $77.00 4511 Radius faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $71.00 $77.00 4511W Radius faceplate with weatherstrip W, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $73.00 $80.00 4512 Bevel faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included MODEL 4513-IB Without faceplate, or strike $71.00 $77.00 $53.00
14 DEADLATCHES FLUSHBOLTS 4530 Standard Duty Deadlatch & FINISHES 628 313, 335 4530 Flat faceplate, 7/8", 31/32", or 1-1/8" backset, strike included 4531 Radius faceplate, 7/8", 31/32", or 1-1/8" backset, strike included 4532 Bevel faceplate, 7/8", 31/32", or 1-1/8" backset, strike included 4900 Heavy Duty Deadlatch & FINISHES 628 313, 335 4900 Any handing, 31/32", 1-1/8", or 1-1/2" backset 4911W Any handing radius with weatherseal faceplate, 31/32", 1-1/8", or 1-1/2" backset MODEL 4913-IB Without faceplate or strike $88.00 $94.00 $88.00 $94.00 $88.00 $94.00 US4, US26D US3, US26 $99.00 $105.00 $129.00 $154.00 $101.00 $107.00 $131.00 $156.00 $77.00 4920AN Heavy Duty Deadlatch (ANSI Size) & FINISHES 628 313, 335 4920AN Flat faceplate, 1-1/2 or 2-3/4 backset with 4506 strike MODEL US4, US26D US3, US26 $122.00 $128.00 $152.00 $177.00 4923AN-IB Without faceplate or strike $90.00 FLUSHBOLTS How to Order FLUSHBOLTS Below is an example of how to order an Adams Rite flushbolt. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order related products separately. 1870 Cylinder-Operated Flushbolt 187 0-3 0-628 FACEPLATE SHAPE BACKSET HANDING FINISH Faceplate shape requirements will vary based upon application. Specify handing of door. Specify the horizontal dimension from the front of the faceplate to the center of the cylinder. Specify finish. Please refer to catalog for complete finish offering.
sw ms 1880 FLUSHBOLTS 15 1870 Cylinder-Operated Flushbolt sw 1870 series & CYLINDER HEIGHT 1870 Flat faceplate, 313, 335, or 628 finish 1871 Radius faceplate, 313, 335, or 628 finish 1871W Radius faceplate with weatherstrip, 313, 335, or 628 finish 1872 Bevel faceplate, 313, 335, or 628 finish STANDARD CYLINDER HEIGHT CYLINDER HEIGHT OVER 12" (SPECIFY) $108.00 $137.00 $108.00 $137.00 $110.00 $139.00 $108.00 $137.00 1870HM Cylinder-Operated Flushbolt MODEL & FINISHES 313, 335, 628 1870HM For hollow metal, 1-1/4" backset $144.00 1877 Cylinder-Operated Flushbolt & FINISHES 628, 313 605, 626 1877 1-1/4" backset, 13-1/2" cylinder height 1877 1-1/4" backset, cylinder height other than 13-1/2" $183.00 $233.00 $230.00 $280.00 MS1880, MS1881 Two-Point Flushbolts MS1880 Hourglass shaped turn, 119, 121, or 682 finish MS1881 Teardrop shaped turn, 119, 121, or 682 finish $133.00 $133.00 MS2180 Auto-Release Two-Point Flushbolt MS2180 7, 8, 9, 10 door height, 119, 121, or 130 finishes MK2180 Monitoring kit, lock status SPDT switch $200.00 $50.00
16 FLUSHBOLTS PIVOTS EXIT DEVICES 4781 Two-Point Deadlatch MODEL & FINISHES 313, 335, 628 US26D US3, US26 4781 Paddle, includes dogging feature $293.00 $372.00 $380.00 PIVOTS B1921, B1923 Reinforcing Pivots & FINISH US2G B1921 1/2" to center line of 4" hinge. Pin uses small pin and bushing. $76.00 B1923 3/4" to center line of 4-1/2" hinge. Pin uses large pin and bushing. $63.00 EXIT DEVICES How to Order EXIT DEVICES Below is an example of how to order an Adams Rite deadlatch. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order related products separately. 8800 Rim Exit Device 880 0 SE M2 36 -US32D MEC MODEL Specify the model number. PUSHBAR FINISH Specify the pushbar finish. Please refer to catalog for complete finish offering. DEVICE OPTIONS Exit devices come with a variety of options, including electrification options. Please refer to catalog for complete offering. MONITORING OPTION Specify if request to exit (monitor/ signal) switches are required. DOOR OPENING WIDTH Specify door opening width. For pairs of doors, specify HALF of the total exit opening. US FINISH Specify US finish, if required. Please refer to catalog for complete finish offering. END CAPS OPTION Specify matching end caps, if required.
EXIT DEVICES 17 8099 Dummy Pushbar & FINISHES 313, 335, 628 US4, US32D US3, US32 8099 Dummy pushbar without mechanism, for doors NOT requiring an exit device 8099M Active dummy bar without latching mechanism, with switch. Can be wired normally open, or normally closed to operate maglock, alarm or similar. 8099M2 Active dummy bar without latching mechanism, with two switches. Can be wired normally open or normally closed to operate maglock, alarm or similar. 3100, 8100 Surface Vertical Rod Exit Device $201.00 $427.00 $479.00 $317.00 $541.00 $595.00 $376.00 $600.00 $654.00 & FINISHES 313, 335, 628 US4, US32D US3, US32 8100 Surface vertical rod for wood and hollow metal doors 8100T Top rod only 3100 Fire-rated surface vertical rod 3100T Top rod only for metal doors 3100W Top rod only for wood doors 8200 Narrow Stile Surface Vertical Rod Exit Device $834.00 $1,056.00 $1,267.00 $761.00 $961.00 $1,141.00 $1,046.00 $1,265.00 $1,391.00 $940.00 $1,138.00 $1,353.00 $985.00 $1,131.00 $1,240.00 & FINISHES 313, 335, 628 US4, US32D US3, US32 8200 Narrow stile surface vertical rod exit device 8200T Top rod only $784.00 $1,003.00 $1,215.00 $713.00 $903.00 $1,094.00 Kitted Options & FINISHES 313, 335, 628 US4, US32D US3, US32 8055 Tall door kit for doors up to 10' tall, for use with 8100, 8200 3055 Tall door kit for doors up to 10' tall, for use with 3100 3300, 8300 Mortise Exit Device $104.00 $134.00 $171.00 $110.00 $142.00 $178.00 & FINISHES 313, 335, 628 US4, US32D US3, US32 8300 Mortise type exit device $627.00 $943.00 $984.00 3300 Fire-rated mortise type $948.00 $1,118.00 $1,201.00 3300, 8300 Mortise Exit Device Kitted Options continued next page
18 EXIT DEVICES 3300, 8300 Mortise Exit Device Kitted Options continued Kitted Options & FINISH 8360-XX Long lip strike, for jambs that project outward 2-1/4" beyond centerline of door, stainless steel, for use with 8300 only 4009-01 Open back strike for 1-3/4" thick doors US32D $54.00 $124.00 8400 Narrow Stile Mortise Exit Device MODEL & FINISHES 313, 335, 628 US4, US32D US3, US32 8400 Mortise type exit device for single leaf $571.00 $833.00 $928.00 Kitted Options 8455-01 Long face strike for covering MS strike prep 8460-17 Long lip strike for jambs that project outward 2-1/4" beyond the centerline of door 91-0995-02 2" thick door kit for use with 8300, 8400 91-0995-03 2-1/4" thick door kit for use with 8300, 8400 91-0995-04 2-1/2" thick door kit for use with 8300, 8400 91-0995-05 2-3/4" thick door kit for use with 8300, 8400 91-0995-06 3" thick door kit for use with 8300, 8400 91-0325-01 Thermal door kit, 1/4" cladding, for use with 8400 91-0325-02 Thermal door kit, 1/2" cladding, for use with 8400 $90.00 $68.00 $12.00 $14.00 $16.00 $19.00 $21.00 $72.00 $132.00 3600, 8500 Metal Door Concealed Vertical Rod Exit Device & FINISHES 313, 335, 628 US4, US32D US3, US32 8500 Concealed vertical rod exit device 8500T Top rod only 3600 Fire-rated concealed vertical rod 3600T Top rod only $595.00 $858.00 $902.00 $531.00 $766.00 $805.00 $1,001.00 $1,198.00 $1,286.00 $875.00 $1,063.00 $1,166.00 Kitted Options MODEL 3655 Tall door kit for doors taller than 66" above bar height, up to 10' $49.00
EXIT DEVICES 19 8600 Narrow Stile Concealed Vertical Rod Exit Device MODEL & FINISHES 313, 335, 628 US4, US32D US3, US32 8600 Concealed vertical rod exit device 8600T Top rod only Kitted Options MODEL 8655 Tall door kit for doors up to 10 for use with 8500, 8600 3700, 8700 Rim Exit Device $560.00 $839.00 $878.00 $505.00 $756.00 $791.00 $47.00 & FINISHES 313, 335, 628 US4, US32D US3, US32 8700 Rim type exit device $411.00 $640.00 $682.00 3700 Fire-rated rim type $696.00 $866.00 $960.00 8800 Narrow Stile Rim Exit Device MODEL & FINISHES 313, 335, 628 US4, US32D US3, US32 8800 Rim type exit device $396.00 $617.00 $659.00 Kitted Options 3889-08 Mullion for doors up to 8' for use with 8700, 3700 3889-10 Mullion for doors up to 10' for use with 8700, 3700 3890-08 Aluminum mullion for doors up to 8' for use with 8800, 313, or 628 finish 3890-10 Aluminum mullion for doors up to 10' for use with 8800, 313, or 628 finish 3900, 8900 Wood Door Concealed Vertical Rod Exit Device $377.00 $419.00 $527.00 $549.00 & FINISHES 313, 335, 628 US4, US32D US3, US32 8900 Wood door concealed vertical rod exit device $642.00 $952.00 $1,000.00 3900 Fire-rated wood door concealed vertical rod $1,068.00 $1,239.00 $1,413.00 Kitted Options MODEL 8955-01 Tall door kit for doors up to 10 for use with 8900 $49.00
20 EXIT DEVICES OPTIONS FOR EXIT DEVICES & FINISHES N/A US4, US32D US3, US32 SE Silent electrification motorized latch retraction EL Electric latch retraction for use with 3700, 8700, 8800 ELD Electric latch retraction with mechanical dogging for rim exit devices only LR Electric latch retraction ALARM Battery-operated alarmed exit device M1 Request to exit - monitor/single signal switch M2 Request to exit - monitor/double signal switch C Cylinder dogging ED Electric dogging MEC Matching end caps $641.00 $336.00 $384.00 $576.00 $442.00 $115.00 $173.00 $46.00 $394.00 $71.00 $89.00 Anti-microbial germ resistent coating available upon request. Add $51. KITTED ACCESSORIES FOR EXIT DEVICES & FINISHES N/A ALARM EXIT KIT Kit for retrofitting an alarm function to an existing Adams Rite exit device, includes new pushbar, end caps and installation hardware. 91-0897-01 Single signal switch kit, retrofits to 3000/8000 91-0897-02 Double signal switch kit, retrofits to 3000/8000 26-0584-MP Sex bolts, 2 per bag, 2 kits required per exit device $96.00 $152.00 313, 335, 628 US4, US32D US3, US32 $542.00 $744.00 $784.00 US26D, US3 $12.00 MODIFICATION OPTIONS FOR EXIT DEVICES THICK DOOR For doors thicker than 1-3/4" and/or door skins plus reinforcement thicker than those specified in the Adams Rite Master Reinforcement Sheet template, for CVR and mortise devices UNIQUE DOOR Cutting charges for non-standard lengths between 30" and 48" $53.00 $68.00
ELECTRIC STRIKES 21 ELECTRIC STRIKES How to Order ELECTRIC STRIKES Below is an example of how to order an Adams Rite electric strike. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order related products separately. 7100, 7101 Electric Strike 710 0-3 1 0-628 -00 FACEPLATE SHAPE Faceplate shape requirements will vary based upon application. VOLTAGE Specify voltage (12 or 24). CURRENT AND DUTY Specify current (AC or DC). FEATURES Features required (fail safe, fail secure, monitored) will vary based upon application. FINISH Specify finish. Please refer to catalog for complete finish offering. LIP EXTENSIONS (DIM. A) Specify dimension 'A' (door centerline to jamb edge) for lip extensions, if required 7100 Series Electric Strikes & FINISHES es 7100 7100 For aluminum jambs 7101 For radius aluminum stiles 7110 For wood jambs 7111 For wood jambs, long faceplate 7130 For aluminum jambs, pre-cut for MS lock strike 7131 For radius aluminum stiles, pre-cut for MS lock strike 7140 ANSI size for hollow metal and wood jambs 7160 For aluminum jambs 7160-XX7 OR XX9 Monitoring signal switches 7170 For hollow metal and wood jambs 7170-XX7 OR XX9 Monitoring signal switches 313, 335, 628 $172.00 $196.00 $172.00 $177.00 $177.00 $172.00 $196.00 $215.00 $239.00 $316.00 $340.00 $215.00 $239.00 $316.00 $340.00 626 652 $205.00 $207.00 Lip extensions up to 3" for center-hung or non-flush doors add $30 7100 Series Electric Strike Components STRIKE BODY KITS 7103A For use with faceplate kits: FPK00, FPK01, FPK10, FPK11, FPK30, FPK31, FPK40 7173A For use with faceplate kits: FPK00, FPK11, FPK31 $144.00 $186.00 7100 Series Electric Strike Components continued next page
22 ELECTRIC STRIKES 7100 Series Electric Strike Components continued FACEPLATE KITS & FINISHES FPK00 For use with body kits: 7103A, 7173A FPK01 For use with body kit: 7103A FPK10 For use with body kit: 7103A FPK11 For use with body kits: 7103A, 7173A FPK30 For use with body kit: 7103A FPK31 For use with body kits: 7103A, 7173A FPK40 For use with body kit: 7103A FPK45 For use with body kit: 7103A, for installing electric strike in previous prep, 4901, 4501 strike cover 313,335, 628 US26D US3 652 $29.00 $49.00 $51.00 $29.00 $33.00 $33.00 $29.00 $49.00 $51.00 $32.00 $84.00 $61.00 $87.00 $64.00 KITTED OPTIONS 91-0171-01 through -13 Lip extension kits for use with 7100 through 7140 91-0171-50 Lip extension kits for use with 7100 through 7140 interior framing systems 91-0172-01 through -13 Lip extension kits for use with 7160 and 7170 91-0172-50 Lip extension kits for use with 7160 and 7170 interior framing systems $30.00 $30.00 $30.00 $30.00 7200 Series Fire-Rated Electric Strikes & FINISH 630 7240 Fire-rated, for cylindrical latches $318.00 7240-50 Lip extension for interior frame systems $348.00 7240-XX9 Monitoring signal switches $410.00 7270 Fire-rated, for mortise latches $363.00 7270-50 Lip extension for interior frame systems $393.00 7270-XX9 Monitoring signal switches $455.00 7400 Series Electric Strikes & FINISHES 7400 For radius jambs 7400-M Monitoring signal switches 7401 For radius aluminum stiles 7401-M Monitoring signal switches 313, 335, 628 630 606 605, 629 611, 612 $224.00 $248.00 $248.00 $251.00 $259.00 $325.00 $349.00 $349.00 $352.00 $360.00 119, 121, 130 $224.00 $325.00 7400 Series Electric Strikes continued next page
ELECTRIC STRIKES 23 7400 Series Electric Strikes continued & FINISHES 7410 For wood jambs, 7-15/16" faceplate 7410-M Monitoring signal switches 7411 For wood jambs, 10-1/4" faceplate 7411-M Monitoring signal switches 7430 For aluminum jambs, flat faceplate 7430-M Monitoring signal switches 7431 For aluminum stiles, radius faceplate 7431-M Monitoring signal switches 7440 For steel and wood, jambs and doors 7440-M Monitoring signal switches 74R1 For use with rim type exit devices with 3/4" latchbolt 74R1-M Monitoring signal switches 74R2 For use with narrow stile rim type exit devices with 1/2" latchbolt 313, 335, 628 $248.00 $275.00 $349.00 $376.00 $258.00 $275.00 $359.00 $376.00 630 606 605, 629 611, 612 119, 121, 130 $230.00 $230.00 $331.00 $331.00 $230.00 $230.00 $331.00 $331.00 $224.00 $248.00 $248.00 $251.00 $259.00 $325.00 $349.00 $349.00 $352.00 $360.00 $304.00 $405.00 $304.00 7400 Series Electric Strike Components STRIKE BODY KITS 7400A Standard body, for use with faceplate kits: FPK7400, FPK7410, FPK7411, FPK7430, FPK7440, FPK7445 7401A Radius body, for use with faceplate kits: FPK7401, FPK7431 $202.00 $202.00 FACEPLATE KITS & FINISHES FPK7400 For use with body kit: 7400A FPK7401 For use with body kit: 7401A FPK7410 For use with body kit: 7400A FPK7411 For use with body kit: 7400A FPK7430 For use with body kit: 7400A FPK7431 For use with body kit: 7401A FPK7440 For use with body kit: 7400A FPK7445 For use with body kit:7400a 313, 335, 628 630 606 605, 629 611, 612 $22.00 $46.00 $46.00 $49.00 $58.00 $46.00 $73.00 $57.00 $83.00 $28.00 $22.00 $46.00 $46.00 $49.00 $58.00 $32.00 119, 121, 130 $22.00 $28.00 7400 Series Electric Strike Components continued next page
24 ELECTRIC STRIKES TRIM 7400 Series Electric Strike Components continued KITTED OPTIONS LEK7400-01 Lip extension kits for use with 7400 series electric strikes VA7400-16VDC 16V DC adapter kit required for all 7400 strikes when applying 16VDC WDC7400 Wood door cover plate for use when mounting 7400 in the inactive leaf of a wood door pair (to simplify the mortising operation) ELX ElectroLynx Adapter to connect Adams Rite products to the ElectroLynx system $38.00 $17.00 $11.00 $27.00 TRIM How to Order TRIM Below is an example of how to order Adams Rite trim. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order compatible products separately. 4591 Deadlatch Paddle 4591 M 02-00 -313 OPTIONS OPERATION DOOR THICKNESS FINISH Paddle option requirements (standard, with switch, active) will vary based upon application. Paddle operation (push or pull, to the left or right) will vary based upon application and compatible product. Select door thickness. Specify finish. Please refer to catalog for complete finish offering. 1000 Series Turns & FINISHES 119, 121, 130 1000-01 OR -02 Turn for use with MS1847 deadlock 1000-11 OR -21 Turn and escutcheon for use with MS1847 deadlock 1004 Turn for use with 5015, 5017 deadlock 1015 Turn for use with 5015, 5017 deadlock 1016 Outside escutcheon $20.00 $23.00 $30.00 $27.00 $23.00
TRIM 25 3000 Fixed Pull & FINISH 3001 Tubular fixed pull US32D $179.00 3002 Flat fixed pull $195.00 3080 Series Entry Trim & FINISHES 3080 Entry trim with standard series lever (01, 02, 03) 3080-M Matching trim cover finish, plated 3080-U Universal trim kit includes tailpieces and trimplates for use with all Adams Rite exit devices 3080-MX Entry trim with designer series levers (MX) STANDARD TRIM US4, US32D, 10B US3, US32 ELECTRIFIED TRIM US4, US32D, 10B US3, US32 $313.00 $322.00 $612.00 $621.00 $399.00 $408.00 $698.00 $707.00 $337.00 $346.00 $636.00 $645.00 $354.00 $363.00 $653.00 $662.00 KITTED OPTIONS 91-0686 Adaptor kit for 3080 trim and G86 exit device $25.00 Anti-microbial germ resistent coating available upon request. Add $51. 3090 Keyless Entry eforce -150 STANDARD UNIT PROX ICLASS & FINISHES 626, 121 626, 121 626, 121 For Adams Rite latches or 8000 Series Exit Devices, Yale 7200 series, Corbin Russwin ED4000 series and Sargent 8500 series rim exit devices only 3090-01 3090P-01 3090C-01 $600.00 $835.00 $870.00 For Adams Rite MS deadlocks 3090-02 3090P-02 3090C-02 $611.00 $846.00 $891.00 Kitted Options RSK-3090 Remote switch input connector 3090-CABLE 15 ft cable extension (ElectroLynx x pigtail) for 3090P/C 3090-CALBEL-EL 15 ft cable extension (ElectroLynx x ElectroLynx ) for 3090P/C $13.00 $28.00 $34.00
26 TRIM A100-3090H Keyless Entry and Aperio Hub Wholesale Kit FOR DEADLATCHES FOR DEADLOCKS & FINISHES 626 121 626 121 A100-3090H-C Keyless entry paired with hub, iclass reader A100-3090H-P Keyless entry paired with hub, PROX reader $1,600.00 $1,600.00 $1,620.00 $1,620.00 $1,600.00 $1,600.00 $1,620.00 $1,620.00 4060 Turn MODEL & FINISH 130 4060 Turn for 1875 deadlock, 1-1/2", 1-3/4", or 2" door thickness 4550 MS Deadlock Lever $54.00 MODEL & DOOR THICKNESS 1-3/4" TO 2-1/16" 2-1/16" TO 2-3/8" 4550 Deadlock lever, 119, 121, or 130 finish $179.00 $213.00 4560, 4565 Series Deadlatch Handles for 4300, 4500, 4900 & FINISHES 119, 121, 130 4560-X01 For door thickness (01) 1-3/4" to 2" 4560-X02 For door thickness (02) 2-1/4" to 2-1/2" 4560-X03 For door thickness (03) 2-3/4" to 3" 4560-X04 For door thickness (04) 3-1/4" 4565-X01 For door thickness (01) 1-3/4" to 2" 4565-X02 For door thickness (02) 2-1/4" to 2-1/2" 4565-X03 For door thickness (03) 2-3/4" to 3" 4565-X04 For door thickness (04) 3-1/4" $45.00 $65.00 $65.00 $65.00 $45.00 $65.00 $65.00 $65.00 4560-010, 4565-010 Series Deadlatch Handles for MS+1890 & FINISHES 119, 121, 130 4560-011 For door thickness (11) 1-3/4" 4560-012 For door thickness (12) 1-3/4" to 2-1/4" 4560-013 For door thickness (13) 2-15/16" to 2-3/4" $35.00 $40.00 $40.00 4560-010, 4565-010 Series Deadlatch Handles for MS+1890 continued next page
TRIM 27 4560-010, 4565-010 Series Deadlatch Handles for MS+1890 continued & FINISHES 119, 121, 130 4565-011 For door thickness (11) 1-3/4" 4565-012 For door thickness (12) 1-3/4" to 2-1/4" 4568, 4569 Eurostyle Deadlatch Handles sw 4568 $35.00 $40.00 & FINISHES 119, 121, 130 4568-X01 For door thickness (01) 1-3/4" to 2" 4568-X02 For door thickness (02) 2-1/4" to 2-1/2" 4568-X03 For door thickness (03) 2-3/4" to 3" 4568-X04 For door thickness (04) 3-1/4" 4569-X01 For door thickness (01) 1-3/4" to 2" 4569-X02 For door thickness (02) 2-1/4" to 2-1/2" 4569-X03 For door thickness (03) 2-3/4" to 3" 4569-X04 For door thickness (04) 3-1/4" $57.00 $71.00 $71.00 $71.00 $64.00 $78.00 $78.00 $78.00 4568-010, 4569-010 Series Deadlatch Handles for MS+1890 & FINISHES 119, 121, 130 4568-011 For door thickness (11) 1-3/4" to 1-15/16" 4568-012 For door thickness (12) 2" to 2-1/4" 4568-013 For door thickness (13) 2-15/16" to 2-3/4" 4568-014 For door thickness (14) 3" 4569-011 For door thickness (11) 1-3/4" to 1-15/16" 4569-012 For door thickness (12) 2" to 2-1/4" 4569-013 For door thickness (13) 2-15/16" to 2-3/4" 4569-014 For door thickness (14) 3" $44.00 $47.00 $47.00 $47.00 $51.00 $54.00 $54.00 $54.00 4590 Deadlatch Paddle for 4300, 4500, 4900 & FINISHES 313, 335, 628 4590-0X-00 For door thickness (00) 1-3/4" 4590-0X-01 For door thickness (01) 1-13/16" to 2" 4590-0X-02 For door thickness (02) 2-1/4" to 2-1/2" 4590-0X-03 For door thickness (03) 2-3/4" to 3" 4590-0X-04 For door thickness (04) 3-1/4" $94.00 $114.00 $114.00 $114.00 $114.00
28 TRIM 4590-1X Deadlatch Paddle for MS+1890, 2190 & FINISHES 313, 335, 628 4590-1X-00 For door thickness (00) 1-3/4" 4590-1X-01 For door thickness (01) 1-3/4" to 2-1/4" 4590-1X-02 For door thickness (02) 2-5/16" to 2-1/2" 4590-1X-03 For door thickness (03) 2-9/16" to 2-3/4" 4591 Deadlatch Paddle for 4300, 4500, 4900 $81.00 $96.00 $96.00 $96.00 & FINISHES 313, 335, 628 US4, US26D US3, US26 4591-0X-00 For door thickness (00) 1-3/4" 4591-0X-01 For door thickness (01) 1-13/16" to 2" 4591-0X-02 For door thickness (02) 2-1/4" to 2-1/2" 4591-0X-03 For door thickness (03) 2-3/4" to 3" 4591-0X-04 For door thickness (04) 3-1/4" 4591-1X Deadlatch Paddle for MS+1890, 2190 $110.00 $187.00 $195.00 $130.00 $207.00 $215.00 $130.00 $207.00 $215.00 $130.00 $207.00 $215.00 $130.00 $207.00 $215.00 & FINISHES 313, 335, 628 US4, US26D US3, US26 4591-1X-00 For door thickness (00) 1-3/4" 4591-1X-01 For door thickness (01) 1-3/4" to 2-1/4" 4591-1X-02 For door thickness (02) 2-5/16" to 2-1/2" 4591-1X-03 For door thickness (03) 2-9/16" to 2-3/4" 4591MA Active paddle, latch activator with monitor switch 4591M Paddle with switch, no latch activator 91-0914 Monitor switch kit for 4591, field installation $97.00 $174.00 $182.00 $112.00 $189.00 $197.00 $112.00 $189.00 $197.00 $112.00 $189.00 $197.00 Add $105.00 Add $91.00 $98.00
TRIM CYLINDERS 29 4600 Heavy Duty Designer Deadlatch Handles LEVER OPERATOR FOR 4300, 4500, 4900 SERIES DEADLATCHES & FINISHES US32D US10B 4600 With standard series handle designation (01, 02, 03) 4600-DESIGNER HANDLE With designer series handle designation (MD through MW) 4600-REX With request to exit form 'C' switch to indicate when lever is actuated 4600-THICK DOOR For door thickness greater than 1-7/8" US3, US4, US32 LEVER OPERATOR FOR 2190, 2290 INTERCONNECTED DEADBOLT/DEADLATCH US32D US10B US3, US4, US32 $112.00 $118.00 $122.00 $96.00 $102.00 $107.00 $153.00 $159.00 $163.00 $137.00 $143.00 $148.00 $149.00 $155.00 $159.00 $133.00 $139.00 $144.00 $129.00 $135.00 $139.00 $113.00 $119.00 $124.00 Anti-microbial germ resistent coating available upon request. Add $51. KITTED OPTIONS REX-4600 Request to exit kit DTK-4600 Fixed lever (dummy) kit TDK-4600-XX Thick door kit (specify door thickness for doors 2" to 2-7/8") TBK-4600-XX Through-bolt mounting kit for back-to-back mounting on wood doors (specify door thickness) $32.00 $9.00 $16.00 $22.00 CYLINDERS How to Order CYLINDERS Below is an example of how to order an Adams Rite cylinder. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order compatible products separately. 4066 Thumbturn 4066-01 -130 LOCK TYPE FINISH Lock type will vary based upon compatible product. Specify finish. Please refer to catalog for complete finish offering. 4024, 4025, 4026 Cylinder Pulls & FINISHES 119, 121, 130 4024-05 Cylinder pull, Schlage keyway 4024-06 Cylinder pull, Weiser keyway $52.00 $52.00 4024, 4025, 4026 Cylinder Pulls continued next page
30 CYLINDERS 4024, 4025, 4026 Cylinder Pulls continued & FINISHES 119, 121, 130 4025-04 Special cylinder pull for Sargent Sixline, requires pull and cylinder modification 4025-05 Cylinder pull, Schlage keyway 4025-06 Standard cylinder pull, Weiser keyway 4025-06, CYL X CYL Cylinder both sides pullset, Weiser keyway 4025-08 Special cylinder pull for Corbin 471AR, requires pull modification 4025-09 Special cylinder pull, for Russwin AR848, requires pull modification 4026-05 Cylinder pull for use with 5015, 5017 deadlock, Schlage keyway 4026-06 Cylinder pull for use with 5015, 5017 deadlock, Weiser keyway 4029 Special cylinder pull for Best 5A5A2, requires pull and cylinder modification Special cylinder pull for Medeco, requires pull and cylinder modification. Please furnish cylinder with purchase order. $204.00 $57.00 $57.00 $114.00 $173.00 $173.00 $60.00 $60.00 $204.00 4036 Mortise Cylinder & FINISHES 313, 335, 628 4036 2 keys and 1/4" ring, KD, KA2, KA50 only For 3300, 3600, 8300, 8400, 8600, or entry trim. Five pin. Can be installed directly in latch case of 8400, 8300, or 3300. $36.00 MS4043 Cylinder Guard MODEL & STILE WALL, CYLINDER MS4043 Cylinder guard, 119, 121, or 130 finishes 1/8" STILE WALL, 5 OR 6 PIN CYLINDER 1/4" STILE WALL, 5 OR 6 PIN CYLINDER 1/8" STILE WALL, 1-5/16" TO 1-7/16" LONG CYLINDER $32.00 $35.00 $49.00 4066 Thumbturn Cylinder MODEL & FINISHES 313, 335, 628 4066 Thumbturn cylinder with 1/4" ring $39.00 4580 Cam Disc 4580 - X00, X01 Included with lever handles, door thickness less than 2" 4580 - X02, X03 Included with lever handles, door thickness greater than 2" $14.00 $19.00
CYLINDERS ACCESSORIES 31 4581 Universal Cam Disc 4581-01 Universal cam disc, non-handed, for 1-3/4" door thickness (included in 4600) 4581-02 Universal cam disc, non-handed, for 2" door thickness 4581-03 Universal cam disc, non-handed, for 2-1/4" door thickness 8650 Cylinder Escutcheon Kit & FINISHES 8650 Cylinder escutcheon kit for 3600, 8500, 8600 exit devices 8650 For wall thickness over 1/8" 119, 121, 130 313, 335, 628 US4, US32D $21.00 $26.00 $26.00 US3, US32 $29.00 $54.00 $60.00 $71.00 $61.00 $86.00 $92.00 $103.00 8736 Rim Cylinder MODEL & FINISHES 313, 335, 628 8736 Rim cylinder for use with 3100, 3700, 8100, 8200, 8700, 8800. Five pin. $40.00 ACCESSORIES How to Order ACCESSORIES Below is an example of how to order Adams Rite accessories. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order compatible products separately. 4085 Header Bolt 4085-02 -IB DIMENSION 'A' PACKAGING Specify dimension 'A' (door centerline to jamb edge). IB (individually boxed). 2190 Dual Force Interconnected Deadbolt/Deadlatch Strikes & FINISHES 630 119, 121 2101-01 Standard flat strike with dust box $24.00 $30.00 2101-XX Strike with extended lip, specify lip length dim. 'A' $38.00 $44.00 2101-02 Standard radius strike with dust box $24.00 $30.00 2102-01 Retrofit strike extended height 7-5/8" with dust box $34.00 $40.00 ARM-014-01/14
32 ACCESSORIES 2290 Dual Force Interconnected Deadbolt/Deadlatch Strikes & FINISHES 630 119, 121, PC7 2206-01 Standard flat strike with dust box 2206-XX Strike with extended lip, specify dimension from strike centerline to frame face 4000 Series Series MS Deadlock Strikes & FINISHES 630 4000 Trim Strike 4001 Box Strike MS4002 Armored Strike 4003 ANSI strike 4005 Strike for 4015 Threshold Bolt 4006 Strike for 1830 Bottom Rail Deadlock 4170 Trim strike for 4070 short throw deadbolt 4304 Surface mount strike for 4300 electrified deadlatch 4505-01 Flat armored box strike for MS+1891 Deadlock/latch 4505-02 Radius armored box strike for MS+1891 Deadlock/latch 4505-17 and -21 Flat long lip armored box strike $16.00 313, 335, 628 US3, US26D $24.00 $30.00 $19.00 $12.00 $33.00 $17.00 $17.00 $38.00 $22.00 $47.00 $68.00 $52.00 $38.00 $44.00 $17.00 $17.00 $23.00 $41.00 $48.00 $41.00 $48.00 $52.00 119, 121 605, 626 $62.00 $56.00 4014 Two-Point Conversion Kit MODEL 4014 Two-point conversion kit for MS1861 Bottom Rail Deadbolt $33.00 4015 Threshold Bolt MODEL & CYLINDER HEIGHT 4015-18-IB Two-point converter, threshold bolt, 603 finish, specify cylinder height STANDARD CYLINDER HEIGHT OVER 53" $39.00 $61.00
sw 4085 ACCESSORIES 33 4016 Header Bolt MODEL 4016 Three-point converter, provides upper bolt for MS1850/1870 Deadlock $49.00 4085 Header Bolt (Pairs of Doors Only) MODEL & DOOR HEIGHT 4085-IB Positioner bolt and header strike, 603 finish, specify cylinder height and door height STANDARD DOOR HEIGHT OVER 84" $76.00 $97.00 4089 Exit Indicator & FINISHES 119, 121, 130 4089 For 1-3/4" door, includes both UBC and IBC signs $47.00 4089-20 For 2"to 2-1/2" door, includes both UBC and IBC signs 91-0912 Adapter plate for converting MS1850/4089. Installation to deadlatch and lever handle or paddle. ACCESSORIES 20-0255-IP Header sign " During Business Hours" 20-0256-IP IBC header sign " Building is Occupied" 4104 Mounting Bridges 4104-01 Radius mounting bridge 4104-02 Flat mounting bridge 4104-03 LH bevel mounting bridge 4104-04 RH bevel mounting bridge $76.00 $28.00 $6.00 $6.00 $7.00 $7.00 $7.00 $7.00 4800, MS4804 Series Strikes & FINISHES 630 603 MS4804 Reinforcing strike and screws, two-part with reinforcement for strengthening metal jamb $16.00 4801 Metal strike, specify dash number indicating shim quantity 4802 Wood strike, specify dash number indicating shim quantity $12.00 $12.00
34 ACCESSORIES Deadlatch Strikes & FINISHES 630 119, 121 4901-01 Flush mount strike, mortised with dust box 4901-02 Radius strike with dust box 4901-XX Extended lip strike, specify lip dim 'A' $13.00 $20.00 $13.00 $20.00 $29.00 $35.00 4902-01 Box strike 4902-02 Short type box strike, radius with dust box, mounting plate 4902-XX Extended lip strike, specify lip dim 'A' 4506 Strike for use with 4920AN $13.00 $20.00 $13.00 $20.00 $29.00 $35.00 $27.00 $33.00 91-0965 Universal Mounting Tab Kits for Installing MS Locks & Latches 91-0965 For flat/radius stiles $11.00 91-0966 For beveled stiles, includes tabs for RH and LH bevel doors and mounting screws for clear and dark bronze $12.00 MS1880, MS1881 Two Point Flushbolt Tall Door Kit MODEL TDK-1880 Tall door kit for door height over 84" $34.00 THICK DOOR KITS 2190, 2290 Dual Force Interconnected Deadbolt/Deadlatch Thick Door Kit 2190-TDK-XX Thick door kit for 2190, 2290 standard exterior trim set. Specify door thickness. TDK-4600-XX Thick door kit for 2190, 2290 low profile trim set. Specify door thickness. $36.00 $17.00 4568, 4569 Eurostyle Deadlatch Handle Thick Door Kits 91-0128-02 TO -04 Thick door kits for 4568, 4569 $14.00 4568-010, 4569-010 Eurostyle Deadlatch Handle Thick Door Kits 26-0203-02 TO -04 Thick door kits for 4568-11, 4569-11 $3.00
ACCESSORIES 35 FACEPLATES MS1850S, MS1850A, MS1950 MS1850S, MS1850A, MS1950 MS1850S MS1850SN MS1850SN Deadlock (Long Throw) Faceplates & FINISHES 313, 335, 628 119, 121, 130 US4, US26D US3, US26 24-0384-010 Flat faceplate 24-0384-110 Radius faceplate 24-0384-210 LH bevel faceplate 24-0384-310 RH bevel faceplate 24-0384-410 Radius with weatherstrip Deadlock (Hookbolt and Short Bolt) Faceplates $5.00 $10.00 $24.00 $26.00 $5.00 $10.00 $24.00 $26.00 $5.00 $10.00 $24.00 $26.00 $5.00 $10.00 $24.00 $26.00 $7.00 $12.00 $26.00 $28.00 & FINISHES 313, 335, 628 119, 121, 130 US4, US26D US3, US26 24-0384-020 Flat faceplate 24-0384-120 Radius faceplate 24-0384-220 LH bevel faceplate 24-0384-320 RH bevel faceplate 24-0384-420 Radius with weatherstrip Deadlock Faceplates $5.00 $10.00 $24.00 $26.00 $5.00 $10.00 $24.00 $26.00 $5.00 $10.00 $24.00 $26.00 $5.00 $10.00 $24.00 $26.00 $7.00 $12.00 $26.00 $28.00 & FINISHES 313 628 BFK-MS1850-10-313 Blank faceplate kit, flat bronze, 1" x 6-7/8" BFK-MS1850-10-628 Blank faceplate kit, flat aluminum, 1" x 6-7/8" BFK-MS1850-11-313 Blank faceplate kit, radius bronze, 1" x 6-7/8" BFK-MS1850-11-628 Blank faceplate kit, radius aluminum, 1" x 6-7/8" Deadlock (Long Throw) Faceplates $19.00 $19.00 $19.00 $19.00 & FINISHES 313, 335, 628 119, 121, 130 US4, US26D US3, US26 24-0226-010 Flat faceplate 24-0226-110 Radius faceplate 24-0226-210 LH bevel faceplate 24-0226-310 RH bevel faceplate Deadlock (Hookbolt) Faceplates $7.00 $12.00 $25.00 $28.00 $7.00 $12.00 $25.00 $28.00 $7.00 $12.00 $25.00 $28.00 $7.00 $12.00 $25.00 $28.00 & FINISHES 313, 335, 628 119, 121, 130 US4, US26D US3, US26 24-0226-020 Flat faceplate $7.00 $12.00 $25.00 $28.00 MS1850SN Deadlock (Hookbolt) Faceplates continued next page
36 ACCESSORIES MS1850SN Deadlock (Hookbolt) Faceplates continued & FINISHES 313, 335, 628 119, 121, 130 US4, US26D US3, US26 24-0226-120 Radius faceplate 24-0226-220 LH bevel faceplate 24-0226-320 RH bevel faceplate 1870 Flushbolt Faceplates $7.00 $12.00 $25.00 $28.00 $7.00 $12.00 $25.00 $28.00 $7.00 $12.00 $25.00 $28.00 & FINISHES 313, 335, 628 119, 121, 130 24-0168-00 Flat faceplate 24-0168-01 Radius faceplate 24-0168-02 LH bevel faceplate 24-0168-03 RH bevel faceplate 24-0168-04 Radius with weatherstrip $12.00 $17.00 $12.00 $17.00 $12.00 $17.00 $12.00 $17.00 $14.00 $19.00 MS+1890 Deadlock Faceplates & FINISHES 313, 335, 628 119, 121, 130 US4, US26D US3, US26 24-0270-020 Flat faceplate 24-0270-120 Radius faceplate 24-0270-220 LH bevel faceplate 24-0270-320 RH bevel faceplate 24-0270-420 Radius with weatherstrip $7.00 $12.00 $27.00 $28.00 $7.00 $12.00 $27.00 $28.00 $7.00 $12.00 $27.00 $28.00 $7.00 $12.00 $27.00 $28.00 $9.00 $14.00 $29.00 $30.00 2331 Heavy Duty Deadbolt Faceplates & FINISHES 119, 121, 130 US26D US3, US26 22-0170 Flat faceplate 22-0032 Strike plate 3300 Fire-Rated Mortise Exit Device Faceplates $33.00 $33.00 $36.00 $33.00 $33.00 $36.00 MODEL & FINISHES 313, 335, 628 24-0015-020 Flat faceplate $7.00
ACCESSORIES 37 4070 Short Throw Deadbolt Faceplates & FINISHES 313, 335, 628 119, 121, 130 24-0136-00 Flat faceplate 24-0136-10 Radius faceplate 24-0136-20 LH bevel faceplate 24-0136-30 RH bevel faceplate 4500 Standard Duty Deadlatch Faceplates $7.00 $12.00 $7.00 $12.00 $7.00 $12.00 $7.00 $12.00 & FINISHES 313, 335, 628 119, 121, 130 24-0017-0220 Flat faceplate 24-0017-1220 Radius faceplate 24-0017-2220 LH bevel faceplate 24-0017-3220 RH bevel faceplate 24-0017-4220 Radius with weatherstrip 4530 Standard Duty Deadlatch Faceplates $5.00 $10.00 $5.00 $10.00 $5.00 $10.00 $5.00 $10.00 $7.00 $12.00 & FINISHES 313, 335, 628 119, 121, 130 24-0016-020 Flat faceplate 24-0016-120 Radius faceplate 24-0016-220 LH bevel faceplate 24-0016-320 RH bevel faceplate 4900 Heavy Duty Deadlatch Faceplates $8.00 $13.00 $8.00 $13.00 $8.00 $13.00 $8.00 $13.00 & FINISHES 313, 335, 628 119, 121, 130 US4, US26D US3, US26 24-0137-01 Flat or bevel faceplate 24-0137-02 Radius faceplate 24-0137-03 Radius with weatherstrip 4900 Heavy Duty Deadlatch Special Faceplates $5.00 $10.00 $24.00 $26.00 $5.00 $10.00 $24.00 $26.00 $7.00 $12.00 $26.00 $28.00 & FINISHES 313, 628 24-0140-313, -628 Radius with weatherstrip seal (1-1/8" x 6-7/8") 24-0144-01-313, -628 Flat or beveled doors (1-1/8" x 7-1/4") 24-0144-03-313, -628 Radius with weatherstrip (1-1/8" x 7-1/4") $11.00 $9.00 $11.00 ARM-014-01/14
38 ACCESSORIES 4920, 8300 Faceplates MODEL & FINISHES 313, 335, 628 119, 121, 130 US4, US26D US3, US26 24-0138-01 Flat or bevel faceplate 7100, 7160 Electric Strike Faceplates $7.00 $12.00 $25.00 $28.00 MODEL & FINISHES 313, 335, 628 24-0685-01-313, -335, -628 Round corner faceplate (1-1/4" x 4-7/8") 7101 Electric Strike Faceplates MODEL & FINISHES 313, 335, 628 24-0685-02-313, -335, -628, -626 Radius faceplate (1-1/4" x 4-7/8") 7110 Electric Strike Faceplates MODEL & FINISH 652 22-0558-652 Round corner faceplate (1-7/16" x 7-15/16") 7111 Electric Strike Faceplates MODEL & FINISH 652 22-0557-652 Round corner faceplate (1-7/16" x 10-1/4") 7130 Electric Strike Faceplates $8.00 $8.00 $15.00 $18.00 MODEL & FINISHES 313, 335, 628 24-0686-01-313, -335, -628 Round corner faceplate (1-1/4" x 6-7/8") 7131 Electric Strike Faceplates $12.00 MODEL & FINISHES 313, 335, 628 24-0686-02-313, -335, -628 Radius faceplate (1-1/4" x 6-7/8") 7140, 7170 Electric Strike Faceplates MODEL & FINISHES 313, 335, 628 626 24-0687-01-313, -335, -628, -626 Radius faceplate (1-1/4" x 4-7/8") $12.00 $8.00 $31.00
POWER 39 POWER 4612 Power Transfer Device 4612-1 Wire transfer, 105 swing 4612-2 Wire transfer, 180 swing 4612-1-SC Wire transfer, swing clear 90 swing $150.00 $195.00 $260.00 PS-1 Power Supply MODEL PS-1 Power supply, 12/24 VDC boxed P/S 1 amp $280.00 PS-LR Power Supply MODEL PS-LR Power supply for exit devices with LR latch retraction option $709.00 PS-SE Power Supply MODEL PS-SE Power supply for exit devices with SE latch retraction option $564.00 4603, 4605, 4606 Kitted Option MODEL BBK-SE Add-on board to the PS-SE, must be supplied with 2 each 12V - 7AH batteries (by others) Transformer/Rectifier/Piezo Horn 4603 Rectifier 4605 Transformer, 115 VAC to 12/24 VAC 4606 Plug-in transformer, 115 VAC to 24 VAC only 29-0218 Piezo electric horn $194.00 $12.00 $49.00 $80.00 $17.00
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience 2014 Hanchett Entry Systems, Inc., an ASSA ABLOY Group company ARM-017-01/14 P 800.872.3267 F 800.232.7329 adamsrite.com