D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10
OVERVIEW D660 Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical Data 4 5 Electronics 6-9 Performance Specs. 10-19 Fail-Safe Versions 20-25 Ordering Information 26-27 Fail-safe option D660 valves are available with either a mechanical or electrically controlled failsafe option. Certain conditions must exist for the fail-safe to work reliably. See the type designation section for fail-safe on page 20 for more information. Our quality management system is certified in accordance with DIN EN ISO 9001. The valve series described in this catalogue have successfully passed EMC tests required by EC Directive. Please refer to the respective references in the electronics section. Valves available with explosion protection to EN 50018, class EEx d LL C-C 2 H 2 T5. Note: Installation dimensions and electric connection altered. Special data sheet on request. This catalogue is for users with technical knowledge. To ensure that all necessary characteristics for function and safety of the system are given, the user has to check the suitability of the products described herein. In case of doubt please contact Moog. For over 25 years Moog has manufactured proportional control valves with integrated electronics. During this time more than 150,000 valves have been delivered. These proportional control valves have been proven to provide reliable control of including injection and blow molding equipment, die casting machines, presses, heavy industry equipment, paper and lumber processing and other applications. D660 SERIES SERVO-PROPORTIONAL CONTROL VALVES The D660 Series proportional flow control valves are throttle valves for 2, 3, 4 and 5-way applications. These valves are suitable for electrohydraulic position, velocity, pressure or force control systems, including those with high dynamic response requirements. Over time, Moog servo-proportional valves have undergone continuous improvements. Moog s ServoJet pilot stage reduces energy consumption and enhances the valves robustness. This pilot stage uses the jet pipe principle, which has been used reliably with different Moog valves for over 10 years. We have updated D660 Series servo-proportional valves with new integrated 24 V DC electronics which improve valve dynamics significantly. The improved D660 Series is designed to enhance the stability and performance of the valves in a wider variety of applications, increase the number of signal options and improve the fail-safe functionality of an application. We have also redesigned the valve s ServoJet pilot stage, reducing hysteresis and null shift and improving pressure gain. Also, the updated ServoJet pilot stage now has the ability to operate at a plus or minus 150 ma rated signal. The new integrated electronics improve valve dynamics by up to 30 percent and now have a 24 V DC supply voltage, as well as 4 to 20 ma spool position output as options. Changes in the D660 Series allow the 90 phase lag frequency response characteristic for small signals (10% amplitude) to increase from 78 Hz to 90 Hz in the D661 Series, (NG 10). Other improvements in the D660 Series address many safety considerations in die-casting machines, injection-molding machines and presses. These include: The valve now places an enable signal at the operator s disposal. If no enabled signal is available, the spool in the second stage moves to a predefined position (hydraulic zero or end position) depending on valve variant. The valve monitors supply voltage. If voltage on the updated valve (18 V up to 32 V) should drop below 18 V, the end position will be disconnected and the spool will move to its predefined position (fail-safe). It will be monitored as soon as it reaches this position and will be confirmed by a logic output. The logic outputs are short circuit protected. Maximum continuous voltage is 32 V with surge pulses up to 500 V and burst of 4 kv (per EMC standard). 2 Moog D660 Series
FEATURES & BENEFITS D660 Flexible Design Elements Optimize the Valve to Your Application The D660 Series Proportional Control Valves are of two-stage or three-stage design. The spool motion of the main stage is produced by either a single-stage or a two-stage pilot valve. Two-stage proportional valves are mainly used when low threshold and good dynamic response with small signals are required. The three-stage proportional valves are suitable for good dynamic response with large signals. By combining a fast first stage, a suitable spool drive area and integrated electronics, an optimum proportional valve can be offered. Highest Flow Capability for High Velocity Applications The D07 to D10 (NG 16 to NG 32) D660 Series valves offer the highest flow per body size. Reduced Spool Drive Area for Improved Dynamic Response The D07 to D10 (NG 16 to NG 32) D660 Series valves are available with a stub shaft spool for higher valve dynamic. Fail-Safe Versions for User Defined Spool Position at Loss of Power Mechanical and electrically controlled fail-safe versions provide defined safe spool position by a spring and/or a poppet valve, and/or by external hydraulic supply cut off. Improved ServoJet Pilot Stage Dynamics for High Dynamic Valve Design The high natural frequency of the ServoJet pilot stage (500 Hz) allows for higher overall valve dynamic. Improved Frequency Response for Superior Control System Performance Improved frequency response of the ServoJet pilot stage valve allows high spool position loop gain. The high loop gain provides excellent static and dynamic response, resulting in superior control system performance. High ServoJet Pilot Stage Pressure Recovery for Reliable Operation The high-pressure recovery of the ServoJet pilot stage (more than 80% P at 100% command signal) provides higher spool driving forces and ensures enhanced spool position repeatability. Improved Resistance to Contamination Reduces Down Time The ServoJet pilot stage valves have larger internal clearances making it more tolerant to contamination. The pilot stage filter has almost unlimited life due to an increased filter size (200 µm nominal fineness). 2-Stage Proportional Control Valve ServoJet Pilot Valve New 24 V Electronics X T A P B T2 Y Moog D660 Series 3
TECHNICAL DATA D660 OPERATING PRINCIPLE OF THE SERVOJET PILOT STAGE The ServoJet pilot stage consists mainly of torque motor, jet pipe and receiver. A current through the coil displaces the jet pipe from its neutral position. This displacement combined with the special shape of the nozzle, directs a focused fluid jet from both receivers towards one receiver. The jet now produces a pressure difference in the control ports. This pressure difference results in a pilot flow, which in turn causes a spool displacement. The pilot stage drain is through the annular area around the nozzle to tank. Hydraulic Symbol: Symbol shown with pilot pressure and electric supply on and zero command signal. Annular Area Nozzle Receiver Jet Pipe X T A P B T2 Y D661 Series, 2-stage proportional control valve Fail-safe version F, opening A T OPERATING PRINCIPLE OF THE MULTI-STAGE VALVE The position control loop for the main stage spool is closed by the integrated electronics. An electrical command signal (flow rate set point) is applied to the integrated position controller which drives the valve coil. The position transducer (LVDT) which is excited via an oscillator, measures the position of the main spool (actual value, position voltage). This signal is then demodulated and fed back to the controller where it is compared with the command signal. The controller drives the pilot valve until the error between command signal and feedback signal is zero. Thus, the position of the main spool is proportional to the electrical command signal. Hydraulic symbol: Symbol shown with pilot pressure and electric supply on and zero command signal. T A P B Y X D662 Series with pilot valve D630 Series 3-Stage Proportional Control Valve Fail-safe version F, opening A T 4 Moog D660 Series
TECHNICAL DATA D661-D665 PERFORMANCE SPECIFICATIONS FOR STANDARD MODELS Operating Pressure Range Port P, A and B Port T Temperature Range Ambient Fluid Seal Material Operating Fluid up to 5,000 psi [350 bar] see data of individual series -4 F to +140 F [-20 C to +60 C] -4 F to +176 F [-20 C to +80 C] NBR, FPM and others on request mineral oil based hydraulic fluid (DIN 51524, part 1 to 3), other fluids on request Viscosity Recommended 15 to 45 mm 2 /s Allowable 5 to 400 mm 2 /s System Filtration Pilot stage or pilot valve: high pressure filter (without bypass, but with dirt alarm) mounted in the main flow and if possible directly upstream of the valve. Main stage: high pressure filter as for the pilot stage. In combination with a fast regulating VD-pump, a bypass filter is possible. Class of Cleanliness The cleanliness of the hydraulic fluid greatly effects the performance (spool positioning, high resolution) and wear (metering edges, pressure gain, leakage) of the valve. Recommended Cleanliness Class For normal operation: ISO 4406 < 16/13 For longer life: ISO 4406 < 14/11 Filter Rating recommended For normal operation: ß15 75 (15 µm absolute) For longer life: ß10 75 (10 µm absolute) Installation Options any position, fixed or movable Vibration 30 g, 3 axes Degree of Protection Shipping Plate EN60529 class IP 65, with mating connector mounted Delivered with an oil sealed shipping plate under the mounting surface. Flow Rate Q [gpm] 3000 2000 1000 500 100 50 10 400 gpm [1500 l/min] 265 gpm [1000 l/min] 145 gpm [550 l/min] 92 gpm [350 l/min] 66 gpm [250 l/min] 40 gpm [150 l/min] 21 gpm [80 l/min] 16 gpm [60 l/min] 8 gpm [30 l/min] 1000 gpm [3785 l/min] 685 gpm [2595 l/min] 375 gpm [1420 l/min] 238 gpm [900 l/min] 170 gpm [645 l/min] 100 gpm [375 l/min] 54 gpm [205 l/min] 40 gpm [150 l/min] 21 gpm [80 l/min] 5 150 500 1000 3000 5000 Rated Pressure Drop p N = 150 psi Valve Pressure Drop p [psi] [10 bar] D665 D665 D664 D663 D662 D662 D661 D661 D661 Valve Flow Diagram Valve flow for maximum valve opening (100% command signal) as a function of the valve pressure drop VALVE FLOW CALCULATIONS A valve s flow is dependent upon its electrical command signal and valve pressure drop. The flow for a given valve pressure drop can be calculated using the square root function for sharp edged orifices as follows: p Q=QN pn Q [gpm] = calculated flow QN [gpm] = rated flow p [psi] = actual valve pressure drop pn [psi] = rated valve pressure drop If large flow rates with high valve pressure drop are required, an appropriate higher pilot pressure has to be selected in order to overcome the flow forces. An approximate value can be calculated as follows: Q PX 3.8 10-2 p AK Q [gpm] = max. flow p [psi] = valve pressure drop with Q AK [in 2 ] = spool drive area PX [psi] = pilot pressure The pilot pressure px has to be at least 215 psi above the return pressure of the pilot stage. Moog D660 Series 5
ELECTRONICS D661-D665 GENERAL REQUIREMENTS FOR VALVE ELECTRONICS Supply 24 V DC, min. 18 V DC, max. 32 V DC. Current consumption max. 300 ma All signal lines, also those of external transducers, shielded Shielding connected radially to (0 V), power supply side and connected to the mating connector housing (EMC) EMC: Meets the requirements of EN 55011:1998 class B, EN 50082-2:1995, performance criteria class A Protective grounding lead.75 mm 2 [18 AWG] Note: When making electrical connections to the valve (shield, protective grounding), appropriate measures must be taken to ensure that locally different earth potentials do not result in excessive ground currents. 6 Moog D660 Series
ELECTRONICS D661-D665 VALVE ELECTRONICS WITH SUPPLY VOLTAGE 24 VOLT AND 6+PE POLE CONNECTOR Command Signal 0 to ±10 ma Floating, Valves with Current Command Input The spool stroke of the valve is proportional to ID = -IE. 100% valve opening P A and B T is achieved at ID = +10 ma. At 0 ma command the spool is in its center position. The input pins D and E are inverting. Either pin D or E is used according to the required operating direction. The other pin is connected to signal ground at cabinet side. Command signal 0 to ±10 V Valves with Voltage Command Input The spool stroke of the valve is proportional to (UD UE). 100% valve opening P A and B T is achieved at (UD UE) = +10 V. At 0 V command the spool is in its center position. The input stage is a differential amplifier. If only one command signal is available, pin D or E is connected to signal ground at cabinet side, according to the required operating direction. Actual Value 4 to 20 ma The actual spool position value can be measured at pin F (see diagram below). This signal can be used for monitoring and fault detection purposes. The spool stroke range corresponds to 4 to 20 ma. The centered position is at 12 ma. 20 ma corresponds to 100% valve opening P A and B T. The position signal output 4 to 20 ma allows to detect a cable break when IF = 0 ma. For failure detection purposes it is advised to connect pin F of the mating connector and route this signal to the control cabinet. CIRCUIT DIAGRAM Circuit Diagram for Measurement of Actual IF (Position of Main Spool) for Valves with 6+PE Pole Connector Note: Enable input With enable signal off, the main spool will move to a safe position. a) Centered position (unbiased pilot valve function code A 1 ) b) End position (biased pilot valve function code B 1 ) 1 ) see type designation F 4 to 20 ma valve side I F R = 500 Ω U F Spool stroke range U F= 2 to 10 V centered position at 6 V Not for signal code D CONNECTOR WIRING Valve Connector Mating Connector Cabinet Side Function Wiring for valves with 6+PE pole connector to EN 175201 Part 804 2 ), and mating connector (type R and S, metal shell) with leading protective earth connection. Voltage Command Current Command A B C D E F PE Supply 24 VDC (min. 18 VDC, max. 32 VDC) Imax: 300 ma Supply/Signal Ground (0 V) Enabled Not Enabled Input Rated Command (differential) Output Actual Value spool position Protective Earth UC-B > 8.5 VDC UC-B < 6.5 VDC UD-E = 0 to ±10 V R e = 10 kω Ie = 1.2 ma at +24 VDC (see note above) Input Command ID = -IE: 0 to ±10 ma (Re=500 Ω) Input Command (Inverted) IE = -ID: 0 to ±10 ma Input voltage for UD-B and UE-B for both signal types is limited to min. -15 V and max. 32 V I F-B: = 4 to 20 ma. At 12 ma spool is in centered position. RL =100 to 500 Ω Signal code D (see page 27): U F-B = 2 to 10 V. At 6 V spool is in centered position. Ra = 500 Ω 2 ) formerly DIN 43563 Moog D660 Series 7
ELECTRONICS D661-D665 VALVE ELECTRONICS WITH SUPPLY VOLTAGE 24 VOLT AND 11+PE POLE CONNECTOR Command Signal 0 to ±10 ma Floating, Valves with Current Command Input The spool stroke of the valve is proportional to I4 = I5. 100% valve opening P A and B T is achieved at I4 = + 10 ma. At 0 ma command the spool is in a defined centered position. The input pins 4 and 5 are inverting. Either pin 4 or 5 is used according to the required operating direction. The other pin is connected to signal ground at cabinet side. Command Signal 0 to ±10 V Valves with Voltage Command Input The spool stroke of the valve is proportional to (U4 U5). 100% valve opening P A and B T is achieved at (U4 U5) = +10 V. At 0 V command the spool is in a defined centered position. The input stage is a differential amplifier. If only one command signal is available, pin 4 or 5 is connected to signal ground at cabinet side, according to the required operating direction. Actual Value 4 to 20 ma The actual spool position value can be measured at pin 6 (see diagram below). This signal can be used for monitoring and fault detection purposes. The spool stroke range corresponds to 4 to 20 ma. The centered position is at 12 ma. 20 ma corresponds to 100% valve opening P A and B T. The position signal output 4 to 20 ma allows to detect a cable break when I6 = 0 ma. For failure detection purposes, it is advised to connect pin 6 of the mating connector and route this signal to the control cabinet. CIRCUIT DIAGRAM Circuit Diagram for Measurement of Actual I6 (Position of Main Spool) for Valves with 11+PE Pole Connector Note: Enable input With enable signal off, the main spool will move to a safe position. a) Centered position (unbiased pilot valve function code E 1 ) b) End position (biased pilot valve function code F 1 ) 1 ) see type designation 6 4 to 20 ma valve side I 6 R = 500 Ω U 6 Spool stroke range U 6= 2 to 10 V centered position at 6 V Not for signal code D CONNECTOR WIRING Wiring for valves with 11+PE pole connector to EN 175201 (Part 804 2 ) and mating connector (type E, metal shell) with leading protective earth connection. Valve 1 2 Connector Mating Connector Cabinet Side Function Voltage Command Current Command Supply 24 VDC (min. 18 VDC, max. 32 VDC) I max : 300 ma Supply/Signal Ground (0 V) 3 4 5 6 7 8 9 10 Enabled Not Enabled Input Rated Command (differential) Output Actual Value Spool Position Auxiliary Signal Valve Ready Not Used Not Used U 3-2 > 8.5 VDC U 3-2 < 6.5 VDC Ie = 1.2 ma at +24 VDC (see note above) U4-5 = 0 to ±10 V Input Command I 4 =-I 5 : 0 to ±10 ma (Re=200 Ω) Re = 10 kω Input Command (Inverted) I 5 =-I 4 : 0 to ±10 ma Input voltage for U 4-2 and U 5-2 for both signal types is limited to min. -15 V and max. 32 V I 6-2 = 4 to 20 ma. At 12 ma spool is in centered position. R L = 100 to 500 Ω Signal code D (see page 27): U 6-2 = 2 to 10 V. At 6 V spool is in centered position. R a = 500 Ω U 8-2 > 8.5 VDC:Enable and supply ok U 8-2 < 6.5 VDC:Not enabled or supply not ok Spool position U 7-2 = 13 to 3 V. At 8 V spool is in centered position. R a = 5 kω Output I max: 20 ma 11 PE Position Error, Logic Protective Earth U 11-2 > 8.5 VDC: < 30% U 11-2 < 6.5 VDC: > 30% Output I max: 20 ma 2 ) formerly DIN 43651 8 Moog D660 Series
ELECTRONICS D661-D665 FAIL-SAFE VALVE ELECTRONICS WITH SUPPLY VOLTAGE 24 VOLT AND 11+PE POLE CONNECTOR Command Signal 0 to ±10 V Valves with Voltage Command Input The spool stroke of the valve is proportional to I4 = I5. 100% valve opening P A and B T is achieved at I4 = 10 ma. At 0 ma command the spool is in a defined centered position. The input pins 4 and 5 are inverting. Either pin 4 or 5 is used according to the required operating direction. The other pin is connected to signal ground at cabinet side. Command Signal 0 to ±10 V Valves with Voltage Command Input The spool stroke of the valve is proportional to (U4 U5). 100% valve opening P A and B T is achieved at (U4 U5) = +10 V. At 0 V command the spool is in a defined centered position. The input stage is a differential amplifier. If only one command signal is available, pin 4 or 5 is connected to signal ground at cabinet side, according to the required operating direction. Actual Value 4 to 20 ma The actual spool position value can be measured at pin 6 (see diagram below). This signal can be used for monitoring and fault detection purposes. The spool stroke range corresponds to 4 to 20 ma. The centered position is at 12 ma. 20 ma corresponds to 100% valve opening P A and B T. The position signal output 4 to 20 ma allows to detect a cable break when I6 = 0 ma. For failure detection purposes, it is advised to connect pin 6 of the mating connector and route this signal to the control cabinet. CIRCUIT DIAGRAM Circuit Diagram for Measurement of Actual I6 (Position of Main Spool) for Valves with 11+PE Pole Connector Note: Enable input With enable signal off, the main spool will move to a safe position. a) Centered position (unbiased pilot valve function code G 1 ) b) End position (biased pilot valve function code H 1 ) 1 ) see type designation 6 4 to 20 ma valve side I 6 R = 500 Ω U 6 Spool stroke range U 6= 2 to 10 V centered position at 6 V Not for signal code D CONNECTOR WIRING Connector Valve Mating Connector Cabinet Side Function Supply Wiring for valves with 11+PE pole connector to EN 175201 (Part 804 2 ) and mating connector (type E, metal shell) with leading protective earth connection. Voltage Command 24 VDC (min. 18 VDC, max. 32 VDC) Imax: 300 ma Current Command Supply/Signal Ground (0 V) Enabled Not Enabled U3-2 > 8.5 VDC U3-2 < 6.5 VDC Ie = 1.2 ma at +24 VDC (see note above) Input Rated Command (differential) Output Actual Value Spool Position Auxiliary Signal Valve Ready Supply, 4/2-way Solenoid Valve Supply, 4/2-way Solenoid Valve,Signal Ground Safe Position, Logic U4-5 = 0 to ±10 V Re = 10 kω Input voltage for U4-2 and U5-2 for both signal types is limited to min. -15 V and max. 32 V I6-2 = 4 to 20 ma. At 12 ma spool is in centered position. RL = 100 to 500 Ω Signal code D (see page 27): U6-2 = 2 to 10 V. At 6 V spool is in centered position. Ra = 500 Ω Spool position U7-2 = 13 to 3 V. At 8 V spool is in centered position. Ra = 5 kω U8-2 > 8.5 VDC:Enable and supply ok U8-2 < 6.5 VDC:Not enabled or supply not ok U11-2 > 8.5 VDC: safe position U11-2 < 6.5 VDC: no safe position Input Command 24 VDC (min. 22.8 VDC, max. 26.4 VDC) (0 V) I4 = -I5: 0 to ±10 ma (Re = 200 Ω) Input Command (Inverted) I5 =-I4: 0 to ±10 ma Output Imax: 20 ma Output Imax: 20 ma Protective Earth 2 ) formerly DIN 43651 Moog D660 Series 9
TECHNICAL DATA D661 PERFORMANCE SPECIFICATIONS FOR STANDARD MODELS English [Metric] D661 -.....P....A D661 -.....P....B Mounting Pattern ISO with additional 2nd T port ISO 4401-05 - 05-0 - 94 ISO 4401-05 - 05-0 - 94 Valve Body Version 4-way, 2 x 2-way and 5-way 4-way, 2 x 2-way and 5-way 2-stage, standard spool 2-stage, standard spool Pilot Stage ServoJet Standard High flow Pilot Connection selectable, internal or external X and Y X and Y Mass lb [kg] 12.3 [5.6] 12.3 [5.6] Rated Flow (±10%) at pn = 75 psi per land gpm [l/min] 8 [30] / 16 [60] / 21[80] / 2 x 21[80] 8 [30] / 16 [60] / 21[80] / 2 x 21[80] Operating Pressure max. Main Stage: port P, A, B psi [bar] 5,000 [350] 5,000 [350] port T with Y internal psi [bar] 3,000 [210] 3,000 [210] port T with Y external psi [bar] 5,000 [350] 5,000 [350] Pilot Stage: regular version psi [bar] 4,000 [280] 4,000 [280] with dropping orifice (on request) psi [bar] 5,000 [350] 5,000 [350] Response Time* for 0 to 100% stroke [ms] 28.0 18.0 Threshold* [%] < 0.05 < 0.05 Hysteresis* [%] < 0.30 < 0.30 Null Shift with T = 55 K [%] < 1.0 < 1.0 Null Leakage Flow* max. (~ critical lap) gpm [l/min] 0.92 [3.5] 1.2 [4.4] Pilot Leakage Flow* gpm [l/min] 0.45 [1.7] 0.69 [2.6] Pilot Flow* for 100% step input gpm [l/min] 0.45 [1.7] 0.69 [2.6] Main Spool Stroke in [mm] ±0.12 [3.0] ±0.12 [3.0] Spool Drive Area in 2 [cm 2 ] 0.31 [2.0] 0.31 [2.0] * measured at 3,000 psi [210 bar] pilot or operating pressure, respectively, fluid viscosity of 32 mm 2 /s and fluid temperature of 104 F [40 C] X and Y external fail-safe position "M" if px 15 psi [1 bar], only with X and Y external Y external X and Y external 4-way version (2nd T port required with Q N > 16 gpm [60 l/min]) 4-way version spring centered (2nd T port required with QN > 16 gpm [60 l/min]) 2 x 2-way version 5-way version PERFORMANCE SPECIFICATIONS FOR STANDARD MODELS Flow vs. Signal Curve at pn = 75 psi [5 bar] per land D661 -.....P/B....A Step Response D661 -.....P/B....B Flow Rate [gpm] 5.3 10.6 15.9 21.1 26.4 With QN > 16 gpm [60 l/min] a non standard 2nd return port T2 is required with 0 20 40 60 80 100 Signal [%] Spool version A: ~critical lap, linear characteristic (80) Spool version D: 10% overlap, linear characteristic Spool version Y: ~critical lap, curvilinear characteristic (80) Typical characteristic curves measured at 3,000 psi [210 bar] pilot or operating pressure, fluid viscosity of 32 mm 2 /s and fluid temperature of 104 F [40 C] Q N [gpm] 21 16 8 Spool Stroke [%] 0 25 50 75 100 Amplitude Ratio [db] -8-6 -4-2 0 +2 3,000 psi [210 bar] 2,000 psi [140 bar] 1,000 psi [70 bar] 0 10 20 30 40 50 Time [ms] Frequency Response 10% 25% 90% 5 10 20 30 50 70 100 Frequency [Hz] -10-30 -50-70 -90-110 Phase Lag [degrees] Spool Stroke [%] 25 50 75 100 0 Amplitude Ratio [db] -6-4 -2 0 +2-8 3,000 psi [210 bar] 0 10 20 30 40 50 Time [ms] 90% 2,000 psi [140 bar] 1,000 psi [70 bar] 25% 10% -10-30 -50-70 -90-110 Phase Lag [degrees] 5 10 20 30 50 70100 200 Frequency [Hz] 10 Moog D660 Series
TECHNICAL DATA D661 INSTALLATION DIAGRAM 6.26(159) Electrical null adjust (behind screw plug) Filter End cap for spring centering Fail-safe M Fail-safe F 4.9(125) 2.55(65) 3.15(80) 1.85(47) Mating connectorhead room for disconnecting 2.83(72) 2.95(75) Set screw 4 (M4 x 6) Set screw 2 (M4 x 6) 3.11(79) 10.2(258) 2.32(59) 9.37(238) The mounting manifold must conform to ISO 4401-05-05-0-94. Attention: Note O-ring counterbore diameter of X and Y ports. For valves in 4/3-way version with Q N > 16 gpm [60 l/min] and in 2 x 2-way version the non standard 2nd return port T 2 must be used. For maximum flow, the manifold ports P, T, A and B require to have Ø 0.45 in [Ø 11.5 mm] (deviation from standard). Mounting surface needs to be flat within.001 in [0.02 mm]. Average surface finish value, Ra, better than 32. Set screw 1 (M4 x 6).26(6.5) 1.65(42).43(11).42 (10.6).91(23).51(13) 2.95 (75) M4.73(18.7).45(11.5).62 (15.7) 8.7(221) 3.9 (100) 2.54 (64.6).39 (9.9).75 (19).51(1.3) Set screw 3 (M4 x 6) View of bottom of valve O-ring counterbore diameter on valve body only with 5-way version P A B T T2 X Y F1 F2 F3 F4 Ø0.45 [11.5] Ø0.45 [11.5] Ø0.45 [11.5] Ø0.45 [11.5] Ø0.45 [11.5] Ø0.25 [6.3] Ø0.25[6.3] M6 M6 M6 M6 x 1.06 [27.0] 0.66 [16.7] 1.47 [37.3] 0.13 [3.2] 2.0 [50.8] -0.31 [-8.0] 2.44 [62.0] 0 2.13 [54.0] 2.13 [54.0] 0 y 0.25 [6.3] 0.84 [21.4] 0.84 [21.4] 1.28 [32.5] 1.28 [32.5] 0.43 [11.0] 0.43 [11.0] 0 0 1.81 [46.0] 1.81 [46.0] CONVERSION INSTRUCTION For main stage operation with internal or external pilot connection. Pilot Flow Set Screw M4 x 6 Pilot Flow Set Screw M4 x 6 Supply bore 1 bore 2 Return bore 3 bore 4 Internal P closed open Internal T closed open External X open closed External Y open closed SPARE PARTS AND ACCESSORIES O-rings (included in delivery) NBR 85 Shore FPM 85 Shore for P, T, T2, A, B 5 pieces ID 0.49 [12.4] x Ø 0.07 [1.8] 45122-004 42082-004 for X, Y 2 pieces ID 0.61 [15.6] x Ø 0.07 [1.8] 45122-011 42082-011 Mating connector, waterproof IP65 (not included in delivery) for cable diameter 6+PE pole B97007-061 EN 175201 Part 804 min. Ø 0.39 [10.0], max. Ø 0.47 [12.0] 11+PE pole B97067-111 EN 175201 Part 804 min. Ø 0.43 [11.0], max. Ø 0.51 [13.0] Flushing plates for P, A, B, T, T2, X, Y for P, T, T2, X, Y for P, T, T2, and X, Y B67728-001 B67728-002 B67728-003 Mounting manifolds see special data sheet Mounting bolts (not included in delivery) required torque required M6 x 60 DIN EN ISO 4762-10.9 A03665-060-060 115 in-lb [13.0 Nm] 4 pieces Replaceable filter A67999-200 200 µm nominal O-rings for filter change HNBR 85 Shore NBR 85 Shore FPM 85 Shore filter 1 piece ID 0.51 [12.0] x Ø 0.59 [2.0] 66117-012-020 A25163-012-020 filter cover 1 piece ID 0.67 [17.1] x Ø 0.78 [2.6] B97009-080 Moog D660 Series 11
TECHNICAL DATA D662 PERFORMANCE SPECIFICATIONS FOR STANDARD MODELS English [Metric] D662 -.....D....A D662 -.....D....B D662 -.....P....M Mounting Pattern ISO 4401-07 - 06-0 - 94 ISO 4401-07 - 06-0 - 94 ISO 4401-07 - 06-0 - 94 Valve Body Version 4-way, 2 x 2-way 4-way, 2 x 2-way 4-way, 2 x 2-way 2-stage, stub shaft spool 2-stage, stub shaft spool 3-stage, standard spool Pilot Stage D061 Series ServoJet, 1-stage D061 Series ServoJet, 1-stage D630 Series, 2-stage Pilot Connection selectable, internal or external X and Y X and Y X and Y Mass lb[kg] 24 [11] 25 [11.5] 25 [11.5] Rated Flow (±10%) at pn = 75 psi per land gpm [l/min] 39.6 [150] / 66.1 [ 250] 39.6 [150] / 66.1 [250] 39.6 [150] / 66.1 [250] Operating Pressure max. Main Stage: port P, A, B psi [bar] 5,000[350] 5,000[350] 5,000[350] port T with Y internal psi [bar] 2,000[140] 2,000[140] 3,000[210] port T with Y external psi [bar] 5,000[350] 5,000[350] 5,000[350] Pilot Stage: regular version psi [bar] 4,000[280] 4,000[280] 4,000[280] with dropping orifice (on request) psi [bar] 5,000[350] 5,000[350] port T psi [bar] 2,000[140] 2,000[140] 3,000[210] Response Time* for 0 to 100% stroke [ms] 44.0 28.0 9.0 Threshold* [%] < 0.10 < 0.10 < 0.20 Hysteresis* [%] < 0.50 < 0.50 < 1.0 Null Shift with T = 55 K [%] < 1.0 < 1.0 < 1.5 Null Leakage Flow* max. (~ critical lap) gpm [l/min] 1.1 [4.2] 1.3 [5.1] 1.2 [4.5] Pilot Leakage Flow* gpm [l/min] 0.45 [1.7] 0.69 [2.6] 0.53 [2.0] Pilot Flow* for 100% step input gpm [l/min] 0.45 [1.7] 0.69 [2.6] 5.3 [20.0] Main Spool Stroke in [mm] ±0.2 [5.0] ±0.2 [5.0] ±0.2 [5.0] Spool Drive Area in 2 [cm 2 ] 0.31 [2.0] 0.31 [2.0] 0.77 [5.0] * measured at 3,000 psi [210 bar] pilot or operating pressure, respectively, fluid viscosity of 32 mm 2 /s and fluid temperature of 104 F [40 C] X and Y external fail-safe position "M" if px 15 psi, only with X and Y external X external X and Y external 4-way version 4-way version spring centered 2 x 2-way version 4-way version 3-stage valve PERFORMANCE SPECIFICATIONS FOR STANDARD MODELS Flow vs. Signal Curve at pn = 75 psi [5 bar] per land D662 -.....D....A Step Response D662 -.....D....B Step Response D662 -.....P....M 0 40 Flow Rate [gpm] 60 40 66 Q N [gpm] Spool Stroke [%] 25 50 75 100 3,000 psi [210 bar] 1,000 psi [70 bar] Spool Stroke [%] 25 50 75 100 3,000 psi [210 bar] 1,000 psi [70 bar] 0 Spool Stroke [%] 25 50 75 100 3,000 psi [210 bar] 1,000 psi [70 bar] 20 0 0 20 40 60 80 100 Signal [%] A: ~critical lap, linear D: 10% overlap, linear Y: ~critical lap, curvilinear Typical characteristic curves measured at 3,000 psi [210 bar] pilot or operating pressure, fluid viscosity of 32 mm 2 /s and fluid temperature of 104 F [40 C] 12 Moog D660 Series Amplitude Ratio [db] -8-6 -4-2 0 +2 0 20 40 60 80 100 Time [ms] Frequency Response 10% 25% 90% 5 10 20 30 50 70 100 Frequency [Hz] -10-30 -50-70 -90-110 Phase Lag [degrees] Amplitude Ratio [db] -8-6 -4-2 0 +2 0 20 40 60 80 100 Time [ms] Frequency Response 10% 25% 90% 5 10 20 30 50 70 100 Frequency [Hz] -10-30 -50-70 -90-110 Phase Lag [degrees] Amplitude Ratio [db] -8-6 -4-2 0 +2 0 5 10 15 20 25 Time [ms] 25% 90% 10% 5 10 20 30 50 70100 200 Frequency [Hz] -10-30 -50-70 -90-110 Phase Lag [degrees]
TECHNICAL DATA D662 INSTALLATION DIAGRAM Headroom for Mating connector disconnecting 4.92(125) Pilot valve D061-8 1.75(44.5).08(2).43(11).26(6.6) Pilot valve D630 Filter at rear side 7.13(181) from manifold Set screw 1 (1/16 NPTF) Set screw 2 (M6 x 6) Filter 2.00(51) 4.21(107) 7.50(190) 6.06(154).43(11) 12.5(317).71(18).55(14).47(12) 1.04(26.5) 4.92(125).05(1.3).28(7).55(13.9).20(5).12(3) 1.81(46) 3.75(95) Electrical null adjust (behind screw plug) View of bottom of valve 3.86(98) The mounting manifold must conform to ISO 4401-07-06-0-94. For maximum flow, the manifold ports P, T, A and B require to have Ø 0.78 in [Ø 20.0 mm] (deviation from standard). Mounting surface needs to be flat within 0.001 in [0.02 mm]. Average surface finish value, Ra, better than 32. P A T B X Y G1 G2 F1 F2 F3 F4 F5 F6 Ø0.79 [Ø20] Ø0.79 [Ø20] Ø0.79 [Ø20] Ø0.79 [Ø20] Ø0.25 [6.3] Ø0.25 [6.3] Ø0.16 [4.0] Ø0.16 [4.0] M10 M10 M10 M10 M6 M6 X 1.97 [50.0] 1.34 [34.1] 0.72 [18.3] 2.59 [65.9] 3.02 [76.6] 3.47 [88.1] 3.02 [76.6] 0.72 [18.3] 0 4.0 [101.6] 4.0 [101.6] 0 1.34 [34.1] 1.97 [50.0] y 0.56 [14.3] 2.19 [55.6] 0.56 [14.3] 2.19 [55.6] 0.63 [15.9] 2.25 [57.2] 0 2.75 [69.9] 0 0 2.75[69.9] 2.75 [69.9] -0.06 [-1.6] 2.81 [71.5] CONVERSION INSTRUCTION For main stage operation with internal or external pilot connection. Pilot Flow Set Screw bore 1 Pilot Flow Set Screw bore 2 Supply (1/16 NPTF) Return (M6 x 6) Internal P open Internal T open External X closed External Y closed SPARE PARTS AND ACCESSORIES O-rings (included in delivery) NBR 85 Shore FPM 85 Shore for P, T, A, B 4 pieces ID 0.86 [21.9] x Ø 0.103 [2.6] 45122-129 42082-129 for X, Y 2 pieces ID 0.43 [10.8] x Ø 0.07 [1.8] 45122-022 42082-022 Mating connector, waterproof IP65 (not included in delivery) for cable diameter 6+PE pole B97007-061 EN 175201 Part 804 min. Ø 0.39 [10.0], max. Ø 0.47 [12.0] 11+PE pole B97067-111 EN 175201 Part 804 min. Ø 0.43 [11.0], max. Ø 0.51 [13.0] Flushing plates 76741 Mounting manifold B46891-001 Mounting bolts (not included in delivery) required torque required M10 x 60 DIN EN ISO 4762-10.9 A03665-100-060 575 in-lb [65.0 Nm] 4 pieces M6 x 55 DIN EN ISO 4762-10.9 A03665-060-055 115 in-lb [13.0 Nm] 2 pieces Replaceable filter for pilot valve D061-8 A67999-200 200 µm nominal for pilot valve D630 A67999-065 65 µm nominal O-rings for filter change HNBR 85 Shore NBR 85 Shore FPM 85 Shore D061-8: before filter 1 piece ID 0.55 [14.0] x Ø 0.039 [1.0] A67008-014-010 behind filter 1 piece ID 0.51 [13.0] x Ø 0.059 [1.5] A67008-013-015 D630: before and behind 2 piece ID 0.51 [13.0] x Ø 0.059 [1.5] 66117-013-015 A25163-013-015 Moog D660 Series 13
TECHNICAL DATA D663 PERFORMANCE SPECIFICATIONS FOR STANDARD MODELS English [Metric] D663 -.....L....B D663 -.....P....M Mounting Pattern ISO 4401-08 - 07-0 - 94 ISO 4401-08 - 07-0 - 94 Valve Body Version 4-way, 2 x 2-way 4-way, 2 x 2-way 2-stage, stub shaft spool 3-stage,standard spool Pilot Stage D061 Series ServoJet, 1-stage D630 Series, 2-stage Pilot Connection selectable, internal or external X and Y X and Y Mass lb [kg] 41.9 [19.0] 43.0 [19.5] Rated Flow (±10%) at pn = 75 psi per land gpm [l/min] 92.5 [350] 92.5 [350] Operating Pressure max. Main Stage: port P, A, B psi [bar] 5,000 [350] 5,000 [350] port T with Y internal psi [bar] 2,000 [140] 3,000 [210] port T with Y external psi [bar] 5,000 [350] 5,000 [350] Pilot Stage: regular version psi [bar] 4,000 [280] 4,000 [280] with dropping orifice (on request) psi [bar] 5,000 [350] port T psi [bar] 2,000 [140] 3,000 [210] Response Time* for 0 to 100% stroke [ms] 37.0 13.0 Threshold* [%] < 0.1 < 0.2 Hysteresis* [%] < 0.5 < 1.0 Null Shift with T = 55 K [%] < 1.0 < 1.5 Null Leakage Flow* max. (~ critical lap) gpm [l/min] 1.5 [5.6] 1.3 [5.0] Pilot Leakage Flow* gpm [l/min] 0.69 [2.6] 0.53 [2.0] Pilot Flow* for 100% step input gpm [l/min] 0.69 [2.6] 7.9 [30.0] Main Spool Stroke in [mm] 0.20 [±5.0] 0.20 [±5.0] Spool Drive Area in 2 [cm 2 ] 0.43 [2.8] 1.77 [11.4] * measured at 3,000 psi [210 bar] pilot or operating pressure, respectively, fluid viscosity of 32 mm 2 /s and fluid temperature of 104 F [40 C] X and Y external 4-way version fail-safe position "M" if px 1 bar, only with X and Y external X external X and Y external 4-way version 4-way version spring centered 2 x 2-way version 4-way version 3-stage valve PERFORMANCE SPECIFICATIONS FOR STANDARD MODELS Flow Rate [gpm] 25 50 75 100 0 Flow vs. Signal Curve at pn = 75 psi per land [5 bar] Y A D 20 40 60 80 100 Signal [%] Spool version A: ~critical lap, linear characteristic Spool version D: 10% overlap, linear characteristic Spool version Y: ~critical lap, curvilinear characteristic Typical characteristic curves measured at 3,000 psi [210 bar] pilot or operating pressure, fluid viscosity of 32 mm 2 /s and fluid temperature of 104 F [40 C] 92.5 Q N [gpm] Spool Stroke [%] 25 50 75 100 0 Amplitude Ratio [db] -6-4 -2 0 +2-8 D663 -..... L.... B Step Response Frequency Response 90% 3,000 psi [210 bar] 1,000 psi [70 bar] 0 20 40 60 80 100 Time [ms] 25% 10% 5 10 20 30 50 70 100 Frequency [Hz] -10-30 -50-70 -90-110 Phase Lag [degrees] Spool Stroke [%] 0 25 50 75 100 Amplitude Ratio [db] -8-6 -4-2 0 +2 D663 -..... P.... M 3,000 [210 bar] 1,000 psi [70 bar] 2,000 psi [140 bar] 0 10 20 30 40 50 Time [ms] 25% 90% 10% 5 10 20 30 50 70100 200 Frequency [Hz] -10-30 -50-70 -90-110 Phase Lag [degrees] 14 Moog D660 Series
TECHNICAL DATA D663 INSTALLATION DIAGRAM Headroom for Mating connector disconnecting 4.9(125) Pilot valve D061-8 2.2(57) Pilot valve D630 Filter at side Filter Set screw 1 (1/16 NPTF) Set screw 2 (M6 x 6) 8.0(204) to manifold 2.5(63) 5.1(130) 8.4(213) 6.2(157).08(2) 53(13.5) 1.26(32) 1.54(39) 15.2(385).25(6.3).98(25).23(6) 4.7(120) 2.3(58). 32(8).63(16).47(12) 6.1(154) Electrical null adjust (behind screw plug) View of bottom of valve 4.9(124) The mounting manifold must conform to ISO 4401-08-07-0-94. For maximum flow, the manifold ports P, T, A and B require to have Ø 1.10 in [Ø 28.0 mm] (deviation from standard). Mounting surface needs to be flat within 0.001 in [0.02 mm]. Average surface finish value, Ra, better than 32. P A T B X Y G 1 G 2 F 1 F 2 F 3 F 4 F 5 F 6 Ø1.1 [28.0] Ø1.1 [28.0] Ø1.1 [28.0] Ø1.1 [28.0] Ø0.44 [11.2] Ø0.44 [11.2] Ø0.30 [7.5] Ø.30 [7.5] M12 M12 M12 M12 M12 M12 x 3.03 [77.0] 2.09 [53.2] 1.16 [29.4] 3.98 [100.8] 0.69 [17.5] 4.45 [112.7] 3.72 [94.5] 1.16 [29.4] 0 5.12 [130.2] 5.12 [130.2] 0 2.09 [53.2] 3.03 [77.0] y 0.69 [17.5] 2.94 [74.6] 0.69 [17.5] 2.94 [74.6] 2.87 [73.0] 0.75 [19.0] -0.19 [-4.8] 3.63 [92.1] 0 0 3.63 [92.1] 3.63 [92.1] 0 3.63 [92.1] CONVERSION INSTRUCTION For main stage operation with internal or external pilot connection. Pilot Flow Set Screw bore 1 Pilot Flow Set Screw bore 2 Supply (1/16 NPTF) Return (M6 x 6) Internal P open Internal T open External X closed External Y closed SPARE PARTS AND ACCESSORIES O-rings (included in delivery) NBR 85 Shore FPM 85 Shore for P, T, A, B 4 pieces ID 1.36 [34.6] x Ø 0.10 [2.6] 45122-113 42082-113 for X, Y 2 pieces ID 0.80 [20.3] x Ø 0.10 [2.6] 45122-195 42082-195 Mating connector, waterproof IP65 (not included in delivery) for cable diameter 6+PE pole B97007-061 EN 175201 Part 804 min. Ø 0.39 [10.0], max. Ø 0.47 [12.0] 11+PE pole B97067-111 EN 175201 Part 804 min. Ø 0.43 in, max. Ø 0.51 [13.0] Flushing plate 76047 Mounting manifold A25855-009 Mounting bolts (not included in delivery) required torque required M12 x 75 EN ISO 4762-10.9 A03665-120-075 970 in-lb [110 Nm] 6 pieces Replaceable filter for pilot valve D061-8 A67999-200 200 µm nominal for pilot valve D630 A67999-065 65 µm nominal O-rings for filter change HNBR 85 Shore NBR 85 Shore FPM 85 Shore D061-8: before filter 1 piece ID 0.55 [14.0] x Ø 0.04 [1.0] A67008-014-010 behind filter 1 piece ID 0.51 [13.0] x Ø 0.06 [1.5] A67008-013-015 D630: filter before and behind 2 piece ID 0.51 [13.0] x Ø 0.06 [1.5] 66117-013-015 A25163-013-015 Moog D660 Series 15
TECHNICAL DATA D664 PERFORMANCE SPECIFICATIONS FOR STANDARD MODELS English [Metric] D664 -.....L....B D664 -.....P....M Mounting Pattern ISO 4401-08 - 07-0 - 94 ISO 4401-08 - 07-0 - 94 Valve Body Version 4-way, 2 x 2-way 4-way, 2 x 2-way 2-stage, stub shaft spool 3-stage, standard spool Pilot Stage D061 Series ServoJet, 1-stage D630 Series, 2-stage Pilot Connection selectable, internal or external X and Y X and Y Mass lb [kg] 41.9 [19.0] 43.0 [19.5] Rated Flow (±10%) at pn = 75 psi per land gpm [l/min] 145 [550] 145 [550] Operating Pressure max. Main Stage: port P, A, B psi [bar] 5,000 [350] 5,000 [350] port T with Y internal psi [bar] 2,000 [140] 3,000 [210] port T with Y external psi [bar] 5,000 [350] 5,000 [350] Pilot Stage: regular version psi [bar] 3,000 [280] 4,000 [280] with dropping orifice (on request) psi [bar] 5,000 [350] port T psi [bar] 2,000 [140] 3,000 [210] Response Time* for 0 to 100% stroke [ms] 48.0 17.0 Threshold* [%] < 0.10 < 0.20 Hysteresis* [%] < 0.50 < 1.0 Null Shift with T = 55 K [%] < 1.0 < 1.5 Null Leakage Flow* max. (~ critical lap) gpm [l/min] 1.5 [5.6] 1.3 [5.0] Pilot Leakage Flow* gpm [l/min] 0.69 [2.6] 0.53 [2.0] Pilot Flow* for 100% step input gpm [l/min] 0.69 [2.6] 7.9 [30.0] Main Spool Stroke in [mm] ±0.24 [±6.0] ±0.24 [±6.0] Spool Drive Area in 2 [cm 2 ] 0.43 [2.8] 1.77 [11.4] * measured at 3,000 psi [210 bar] pilot or operating pressure, respectively, fluid viscosity of 32 mm2/s and fluid temperature of 104 F [40 C] X and Y external fail-safe position "M" if px 14 psi, only with X and Y external X external X and Y external 4-way version 4-way version spring centered 2 x 2-way version 4-way version 3-stage valve PERFORMANCE SPECIFICATIONS FOR STANDARD MODELS Flow vs. Signal Curve at pn = 75 psi [5 bar] per land D664 -..... L.... B Step Response D664 -..... P.... M Flow Rate [gpm] 132 159 106 A 153 137 Q N [gpm] Spool Stroke [%] 25 50 75 100 3,000 psi [210 bar] 1,000 psi [70 bar] 2,000 psi [140 bar] Spool Stroke [%] 25 50 75 100 3,000 psi [210 bar] 1,000 psi [70 bar] 26 53 79 0 D Y 20 40 60 80 100 Signal [%] Spool version A: ~critical lap, linear characteristic Spool version D: 10% overlap, linear characteristic Spool version Y: ~critical lap, curvilinear characteristic Typical characteristic curves measured at 3,000 psi [210 bar] pilot or operating pressure, fluid viscosity of 32 mm 2 /s and fluid temperature of 104 F [40 C] 0 Amplitude Ratio [db] -8-6 -4-2 0 +2 0 20 40 60 80 100 Time [ms] Frequency Response 90% 25% 10% 5 10 20 30 50 70 100 Frequency [Hz] -10-30 -50-70 -90-110 Phase Lag [degrees] 0 Amplitude Ratio [db] -8-6 -4-2 0 +2 0 10 20 30 40 50 Time [ms] 25% 90% 10% 5 10 20 30 50 70100 200 Frequency [Hz] -10-30 -50-70 -90-110 Phase Lag [degrees] 16 Moog D660 Series
TECHNICAL DATA D664 INSTALLATION DIAGRAM Headroom for Mating connector disconnecting 4.9(125) Pilot valve D061-8 2.2(57) Pilot valve D630 Filter at side Filter Set screw 1 (1/16 NPTF) Set screw 2 (M6 x 6) 8.0(204) to manifold 2.5(63) 5.1(130) 8.4(213) 6.2(157).08(2) 53(13.5) 1.26(32) 1.54(39) 15.2(385).25(6.3).98(25).23(6) 4.7(120) 2.3(58). 32(8).63(16).47(12) 6.1(154) Electrical null adjust (behind screw plug) View of bottom of valve 4.9(124) The mounting manifold must conform to ISO 4401-08-07-0-94. For maximum flow, the manifold ports P, T, A and B require to have Ø 1.25 in [Ø 32.0 mm] (deviation from standard). Mounting surface needs to be flat within.001 in [0.02 mm]. Average surface finish value, Ra, better than 32. P A T B X Y G1 G2 F1 F2 F3 F4 F5 F6 Ø1.26 [32.0] Ø1.26 [32.0] Ø1.26 [32.0] Ø1.26 [32.0] Ø0.44 [11.2] Ø0.44 [11.2] Ø0.30 [7.5] Ø0.30 [7.5] M12 M12 M12 M12 M12 M12 x 3.03 [77.0] 2.09 [53.2] 1.16 [29.4] 3.97 [100.8] 0.69 [17.5] 4.45 [112.7] 3.72 [94.5] 1.16 [29.4] 0 5.13 [130.2] 5.13 [130.2] 0 2.09 [53.2] 3.03 [77.0] y 0.69 [17.5] 2.94 [74.6] 0.69 [17.5] 2.94 [74.6] 2.87 [73.0] 0.75 [19.0] -0.19 [-4.8] 3.63 [92.1] 0 0 3.63 [92.1] 3.63 [92.1] 0 3.63 [92.1] CONVERSION INSTRUCTION For main stage operation with internal or external pilot connection. Pilot Flow Set Screw bore 1 Pilot Flow Set Screw bore 2 Supply (1/16 NPTF) Return (M6 x 6) Internal P open Internal T open External X closed External Y closed SPARE PARTS AND ACCESSORIES O-rings (included in delivery) NBR 85 Shore FPM 85 Shore for P, T, A, B 4 pieces ID 1.36 [34.6] x Ø 0.10 [2.6] 45122-113 42082-113 for X, Y 2 pieces ID 0.80 [20.3] x Ø 0.10 [2.6] 45122-195 42082-195 Mating connector, waterproof IP65 (not included in delivery) for cable diameter 6+PE pole B97007-061 EN 175201 Part 804 min. Ø 0.39 [10.0], max. Ø 0.47 [12.0] 11+PE pole B97067-111 EN 175201 Part 804 min. Ø 0.43 [11.0], max. Ø 0.51 [13.0] Flushing plate 76047 Mounting manifold A25855-009 Mounting bolts (not included in delivery) required torque required M12 x 75 DIN EN ISO 4762-10.9 A03665-120 075 970 in-lb [110 Nm] 6 pieces Replaceable filter for pilot valve D061-8 A67999-200 200 µm nominal for pilot valve D630 A67999-065 65 µm nominal O-rings for filter change HNBR 85 Shore NBR 85 Shore FPM 85 Shore D061-8: before filter 1 piece ID 0.55 [14.0] x Ø 0.04 [1.0] A67008-014-010 behind filter 1 piece ID 0.51 [13.0] x Ø 0.06 [1.5] A67008-013-015 D630: filter before and behind 2 piece ID 0.51 [13.0] x Ø 0.06 [1.5] 66117-013-015 A25163-013-015 Moog D660 Series 17
TECHNICAL DATA D665 PERFORMANCE SPECIFICATIONS FOR STANDARD MODELS English [Metric] D665 -.....P....H D665 -.....K....L Mounting Pattern ISO 4401-10 - 08-0 - 94 ISO 4401-10 - 08-0 - 94 Valve Body Version 4-way, 2 x 2-way 4-way, 2 x 2-way 3-stage, standard spool 3-stage, stub shaft spool Pilot Stage D631 Series, 2-stage D661 Series ServoJet, 2-stage Pilot Connection selectable internal or external optional X and Y X and Y required Mass lb [kg] 154 [70.0] 162 [73.5] Rated Flow (±10%) at pn = 75 psi per land gpm [l/min] 265 [1000] 400 [1500] 265[1000] 400[1500] Operating Pressure max. Main Stage: ports P with X external, A, B psi [bar] 5000 [350] 5000 [350] port T with Y internal psi [bar] 1400 [100] 1400 [100] port T with Y external psi [bar] 5000 [350] 5000 [350] Pilot Stage: regular version, ports P, A and B psi [bar] 3000 [210] 3000 [210] with dropping orifice (on request) psi [bar] 4000 [280] 5000 [350] port T psi [bar] 2,000 [140] 2,000 [140] 3,000 [210] Response Time* for 0 to 100% stroke [ms] 30.0 35.0 10.0 12.0 Threshold* [%] < 0.30 < 0.20 < 0.30 < 0.20 Hysteresis* [%] < 1.0 < 0.70 < 1.0 < 0.70 Null Shift with T = 55 K [%] < 2.0 < 1.5 < 2.5 < 2.0 Null Leakage Flow* max. (~ critical lap) gpm [l/min] 2.8 [10.5] 2.9 [11.0] Pilot Leakage Flow* gpm [l/min] 0.92 [3.5] 1.1 [4.0] Pilot Flow* for100% step input gpm [l/min] 11.9 [45.0] 14.5 [55.0] 10.6 [40.0] 13.2 [50.0] Main Spool Stroke in [mm] ±0.22 [±5.5] ±0.31 [±8] ±0.22 [±5.5] ±0.31 [±8.0] Spool Drive Area in 2 [cm 2 ] 5.1 [33.2] 1.5 [9.6] * measured at 3,000 psi [210 bar] pilot or operating pressure, respectively, fluid viscosity of 32 mm 2 /s and fluid temperature of 104 F [40 C] X and Y external Y external X external 4-way version 3-stage valve 4-way version 3-stage valve 2x2-way version 3-stage valve PERFORMANCE SPECIFICATIONS FOR STANDARD MODELS Flow Rate [gpm] 200 300 400 100 0 Flow vs. Signal Curve at pn = 75 psi [5 bar] per land Y A 20 40 60 80 100 Signal [%] Spool version A: ~critical lap, linear characteristic Spool version D: 10 % overlap, linear characteristic Spool version Y: ~critical lap,curvilinear characteristic Spool version V: 20 % overlap, curvilinear characteristic * measured at 3,000 psi [210 bar] pilot or operating pressure, respectively, fluid viscosity of 32 mm 2 /s and fluid temperature of 104 F [40 C] 18 Moog D660 Series D V B T 400 Q N [gpm] Spool Stroke [%] 25 50 75 100 0 Amplitue Ratio [db] -6-4 -2 0 +2-8 D665 -..... P15.... H Step Response 3,000 psi [210 bar] 2,000 psi [140 bar] 1,000 psi [70 bar] 0 20 40 60 80 100 1 Time [ms] Frequency Response 90% 25% 10% 2 3 4 5 10 20 30 50 Frequency [Hz] -10-30 -50-70 -90-110 Phase Lag [degrees] Spool Stroke [%] 0 25 50 75 100 Amplitue Ratio [db] -8-6 -4-2 0 +2 D665 -..... K15.... J 3,000 psi [210 bar] 2,000 psi [140 bar] 1,000 psi [70 bar] 0 5 10 15 20 25 Time [ms] 25% 10% 90% 5 10 20 30 50 70 100200 Frequency [Hz] -10-30 -50-70 -90-110 Phase Lag [degrees]
TECHNICAL DATA D665 INSTALLATION DIAGRAM Headroom for disconnecting Pilot valve D631 Pilot valve D661 Filter behind cover 388 from manifold Set screw 4 (1/16 NPTF) Set screw 2 (1/16 NPTF) Mating connector 14.9(125) Filter behind cover Electrical null adjust (behind screw plug) 9.0(229) 2.3 (59) 13.7(349) 4.4(112) 6.7(171).87(22) 1.30 (33).87(22) 1.87 (50) 2.36 (60) 1/8 NPTF 19.6 (497).67(17) 9.06(230).11(2.8) 0.5(1.3).32(8).24(6) 3.9(99) 7.9(200) Set screw 3 (1/8 NPTF) Set screw 1 (1/8 NPTF) 8.0(203) View of bottom of valve The mounting manifold must conform to ISO 4401-10-08-0-94. For maximum flow, the manifold ports P, T, A and B require to have Ø 1.96 in [Ø 50.0 mm] (deviation from standard). Mounting surface needs to be flat within 0.001 in [0.02 mm]. Average surface finish value, Ra, better than 32. P A T B X Y G1 G2 F1 F2 F3 F4 F5 F6 Ø1.97 [50.0] Ø1.97 [50.0] Ø1.97 [50.0] Ø1.97 [50.0] Ø0.44 [11.2] Ø0.44 [11.2] Ø0.30 [7.5] Ø0.30 [7.5] M20 M20 M20 M20 M20 M20 x 4.49 [114.3] 3.25 [82.5] 1.63 [41.3] 5.81 [147.6] 1.63 [41.3] 6.63 [168.3] 5.81 [147.6] 1.63 [41.3] 0 7.5 [190.5] 7.5 [190.5] 0 3.0[76.2] 4.5 [114.3] y 1.38 [35.0] 4.87 [123.8] 1.38 [35.0] 4.87 [123.8] 5.13 [130.2] 1.75 [44.5] 0 6.25 [158.8] 0 0 6.25 [158.8] 6.25 [158.8] 0 6.25 [158.8] CONVERSION INSTRUCTION For main stage operation with internal or external pilot connection. Pilot Flow Set Screw bore Pilot Flow Set Screw bore Supply 1 (1/8 NPTF) 2 (1/16 NPTF) Return 3 (1/8 NPTF) 4 (1/16 NPTF) Internal P closed open Internal T closed open External X open closed External Y open closed SPARE PARTS AND ACCESSORIES O-rings (included in delivery) NBR 85 Shore FPM 85 Shore for P, T, A, B 4 pieces ID 2.11 [53.6] x Ø 0.14 [3.5] 45122-035 42082-035 for X, Y 2 pieces ID 0.55 [14.0] x Ø 0.07 [1.8] 45122-008 42082-008 Mating connector, waterproof IP65 (not included in delivery) for cable diameter 6+PE pole B97007-061 EN 175201 Part 804 min. Ø 0.39 [10.0], max. Ø 0.47 [12.0] 11+PE pole B97067-111 EN 175201 Part 804 min. Ø 0.43 [11.0], max. Ø 0.51 [13.0] Flushing plate not available Mounting manifold A25856-001 Mounting bolts (not included in delivery) required torque required M20 x 90 DIN EN ISO 4762-10.9 A03665-200-090 385 ft-lb [520 Nm] 6 pieces Replaceable filter for pilot valve D631 A67999-100 100 µm nominal and D661 A67999-200 200 µm nominal O-rings for filter change for pilot valves D631 and D661 HNBR 85 Shore NBR 85 Shore FPM 85 Shore filter 1 piece ID 0.47 [12.0] x Ø 0.80 [2.0] 66117-012-020 A25163-012-020 filter cover D631 1 piece ID 0.67 [17.0] x Ø 0.80 [2.0] A25163-017-020 filter cover D661 1 piece ID 0.67 [17.1] x Ø 0.10 [2.6] B97009-080 Moog D660 Series 19
TECHNICAL DATA FAIL-SAFE VERSIONS D661-D665 OPERATING PRINCIPLE OF THE FAIL-SAFE MULTI-STAGE VALVE Application safety is dependent on the application itself, local safety requirements and design preferences. For applications where certain safety regulations are applicable, a defined metering spool position is needed in order to avoid potential damage. Various fail-safe versions are available for Moog servoproportional control valves. To define the fail-safe operation in a D660 Series Valve, a complete understanding of the hydraulic circuit and country specific safety regulations is required. Following is information on the W, P and S electrically controlled fail-safe functionality. Contact Moog for additional information. Fail-Safe Version W: After switching off the 24 V supply to the safety solenoid valve, this fail-safe function causes a safe metering spool position: overlapped centered position or fully opened. In order to move the spool to the safe centered position with 2-stage proportional valves, the two control chambers of the main stage are hydraulically short-circuited by a 2/2-way poppet valve. The spring force then moves the spool to the overlapped position. Fail-Safe Version P: Fail-safe version P is based on pilot pressure cut off. Both control chambers are then depressurized by leakage through the receiver. The spring force subsequently moves the spool to the safe position A T. Fail-Safe Version W and S for D665 3 Stage Valves: With D665 Series 3-stage proportional valves, the fail-safe function is implemented with a 4/2-way solenoid valve. In addition to the hydraulic short circuit of the two control chambers, the pilot stage pressure is switched off. The spring force moves the main spool to the safe position. D663 Series two-stage proportional control valve with Servojet pilot valve, 2/2-way poppet valve Fail-safe version W Note: According to EN 954-1, a higher safety category can be achieved if a fail-safe valve is used. X T A P B Y ELECTRICAL CHARACTERISTICS Electrical characteristics of the 2/2-way poppet valve (D661 to D664 Series, 2-stage) and 4/2-way solenoid valve (D665 Series) for the fail-safe version. Valve version for D661 to D664 2/2-way solenoid poppet valve for D665 4/2-way solenoid valve Function electromagnetic Nominal voltage UN 24 V DC (min 22.8 V DC, max 26.4 V DC ) Nominal power, PN 2/2-way poppet valve 26 W 4/2-way poppet valve 36 W Connector wiring 2 1 DIN 43650-1 Form A: 2+PE - PG9 Hydraulically activated valves for the fail-safe version on request. 20 Moog D660 Series
TECHNICAL DATA FAIL-SAFE VERSION D661 INSTALLATION DIAGRAM Electrical null adjust (behind screw plug) 6.26(159) Warning! The electric null adjust must not be changed if the position of the main-spool is monitored. Filter 6.93(176) A B 2.56(65) 4.92(125) 3.15(80) Mating connector Headroom for disconnecting 1.85(47) Version P Version W.05(1.3) X M4 P Y.26(6.5).43(11) 2.84(72) 4.33(110).74(18.7).62(15.7) 2.95(75) 11.4(290) Set screw 4 (M4 x 6) Set screw 2 (M4 x 6) Set screw 1 (M4 x 6) Set screw 3 (M4 x 6) The mounting manifold must conform to ISO 4401-05-05-0-94 (see page 11). Version with mechanical spring centering (fail-safe version M) see page 10 (symbol) and page 11 (installation drawing) Fail-safe version P Centered position, underlapped Fail-safe version W Centered position, underlapped A B A B Fail-safe version W Centered position, overlapped CONVERSION INSTRUCTION For main stage operation with internal or external pilot connection. Pilot Flow Set Screw M4 x 6 Pilot Flow Set Screw M4 x 6 Supply bore 1 bore 2 Return bore 3 bore 4 Internal P closed open Internal T closed open External X open closed External Y open closed SPARE PARTS AND ACCESSORIES Spare parts and accessories: Page 11 Moog D660 Series 21
TECHNICAL DATA FAIL-SAFE VERSION D662 INSTALLATION DIAGRAM 5.98(152) Headroom for Mating connector disconnecting 4.92(125).43(11).26(6.6).71(18) Warning! The electric null adjust must not be changed if the position of the main-spool is monitored. Set screw 1 (1/16 NPTF) Filter Set screw 2 (M6 x 6) 4.21(107) 1.50(38) 1.58(40) 8.94(227).20(5) 2.01(51) 3.19(81) 1.06(27).08(2) 1.04(26.5).05(1.2) 7.32(186).43(11).27(7).55(13.9).12(3) 3.62(92) 3.74(95) 6.06(154) 12.5(317) Electrical null adjust (under screw plug) The mounting manifold must conform to ISO 4401-07-06-0-94 (see page 13). Version with mechanical spring centering (spool position "M") see page 12 (symbol) and page 13 (installation drawing) Fail-safe version P Centered position, underlapped Fail-safe version W Centered position, underlapped A B Fail-safe version W Centered position, overlapped A B CONVERSION INSTRUCTION For main stage operation with internal or external pilot connection. Pilot Flow Set Screw bore 1 Pilot Flow Set Screw bore 2 Supply (1/16 NPTF) Return (M6 x 6) Internal P open Internal T open External X closed External Y closed SPARE PARTS AND ACCESSORIES Spare parts and accessories: Page 11 22 Moog D660 Series
TECHNICAL DATA FAIL-SAFE VERSION D663 INSTALLATION DIAGRAM Headroom for Mating connector disconnecting 4.92(125) 7.05(179) Warning! The electric null adjust must not be changed if the position of the main-spool is monitored. Filter Set screw 1 (1/16 NPTF) Set screw 2 (M6 x 6).08(2).32(8) 2.24(57) 1.18(30) 9.89(251) 2.48(63) 5.12(130) 6.19(157).25(6.3).99(25) 1.26(32) 1.54(39).24(6).53(13.5) 2.29(58) 15.17(385) 4.65(118) Electrical null adjust (behind screw plug) The mounting manifold must conform to ISO 4401-08-07-0-94 (see page 15). Version with mechanical spring centering (fail-safe version M) see page 14 (symbol) and page 15 (installation drawing) Fail-safe version W Centered position, underlapped A B Fail-safe version W Centered position, overlapped A B CONVERSION INSTRUCTION For main stage operation with internal or external pilot connection. Pilot Flow Set Screw bore 1 Pilot Flow Set Screw bore 2 Supply (1/16 NPTF) Return (M6 x 6) Internal P open Internal T open External X closed External Y closed SPARE PARTS AND ACCESSORIES Spare parts and accessories: Page 15 Moog D660 Series 23
TECHNICAL DATA FAIL-SAFE VERSION D664 INSTALLATION DIAGRAM Headroom for Mating connector disconnecting 4.92(125) 7.05(179) Warning! The electric null adjust must not be changed if the position of the main-spool is monitored. Filter Set screw 1 (1/16 NPTF) Set screw 2 (M6 x 6).08(2) 1.18(30).32(8) 9.89(251) 2.24(57) 2.48(63) 5.12(130) 6.19(157).25(6.3).99(25) 1.26(32) 1.54(39).24(6).53(13.5) 2.29(58) 15.17(385) 4.65(118) Electrical null adjust (behind screw plug) The mounting manifold must conform to ISO 4401-08-07-0-94 (see page 17). Version with mechanical spring centering (fail-safe version M) see page 16 (symbol) and page 17 (installation drawing) Fail-safe version W Centered position, underlapped A B Fail-safe version W Centered position, overlapped A B CONVERSION INSTRUCTION For main stage operation with internal or external pilot connection. Pilot Flow Set Screw bore 1 Pilot Flow Set Screw bore 2 Supply (1/16 NPTF) Return (M6 x 6) Internal P open Internal T open External X closed External Y closed SPARE PARTS AND ACCESSORIES Spare parts and accessories: Page 17 24 Moog D660 Series
TECHNICAL DATA FAIL-SAFE VERSION D665 INSTALLATION DIAGRAM Headroom for Mating connector disconnecting 4.93(125) Filter behind cover Warning! The electric null adjust must not be changed if the position of the main-spool is monitored. Electrical null adjust (behind screw plug) Set screw 4 (1/16 NPTF) Set screw 2 (1/16 NPTF) 2.29(58) 2.32(59).11(2.8).32(8) 9.02(229) 0.05(1.3) 16.04(407) 6.74(171).87(22) 1.30(33) 1.97(50) 1.97(60) 19.58(497) 1/8NPTF.67(17) Set screw 3 (1/8 NPTF).32(8) 7.80(198) 7.92(201) 8.27(210) 3.90(99) Set screw 1 (1/8 NPTF) The mounting manifold must conform to ISO 4401-08-07-0-94 (see page 19). Version with mechanical spring centering (fail-safe version M) see page 18 (symbol) and page 19 (installation drawing) Fail-safe version W Centered position, overlapped Fail-safe version S End position P A, critical lap Fail-safe version W Centered position, overlapped A B P T Y CONVERSION INSTRUCTION For main stage operation with internal or external pilot connection. Pilot Flow Set Screw bore Pilot Flow Set Screw bore Supply 1 (1/8 NPTF) 2 (1/16 NPTF) Return 3 (1/8 NPTF) 4 (1/16 NPTF) Internal P closed open Internal T closed open External X open closed External Y open closed SPARE PARTS AND ACCESSORIES Spare parts and accessories: Page 19 Moog D660 Series 25
ORDERING INFORMATION D660 ORDERING INFORMATION FOR STANDARD MODELS Model Type Designation Rated Flow gpm [l/min] Description @ 75 psi [5 bar] per land D661-2745E P60HAAM4NSF2 16 60 Spool type: 4-way, critical lap, linear; ServoJet pilot D661-4737 P60HDAM4NSF2-O 16 60 Spool type: 4-way, 10% overlap, linear; ServoJet pilot D661-2722E P80HAAM4NSF2 21 80 Spool type: 4-way, critical lap, linear; ServoJet pilot D661-4732 P80HDAM4NSF2-O 21 80 Spool type: 4-way, 10% overlap, linear; ServoJet pilot D662-2714E D01HABM6NSF2 40 150 Spool type: 4-way, critical lap, linear; High-flow ServoJet pilot D662-4724 D01HDBM6NSF2-O 40 150 Spool type: 4-way, 10% overlap, linear; High-flow ServoJet pilot D662-2718E D02HABM6NSF2 66 250 Spool type: 4-way, critical lap, linear; High-flow ServoJet pilot D662-2722E D02HDBM6NSF2 66 250 Spool type: 4-way, 10% overlap, linear; High-flow ServoJet pilot D663-2709E L03HABM6NSF2 92 350 Spool type: 4-way, critical lap, linear; High-flow ServoJet pilot D663-4705 L03HDBM6NSF2-O 92 350 Spool type: 4-way, 10% overlap, linear; High-flow ServoJet pilot D664-2708E L05HABM6NSF2 145 550 Spool type: 4-way, critical lap, linear; High-flow ServoJet pilot D664-4714 L05HDBM6NSF2-O 145 550 Spool type: 4-way, 10% overlap, linear; High-flow ServoJet pilot D665E2301 K15FAHO6NSF2 400 1500 Spool type: 4-way, critical lap, linear; 2-stage MFB pilot D665-4602 K15FDHO6NSF2-O 400 1500 Spool type: 4-way, 10% overlap, linear; 2-stage MFB pilot Notes: All standard models use 24 V supply voltage and ±10 V command signal. Spool position output is 2.5 V to 13.5 V. 26 Moog D660 Series
ORDERING INFORMATION D660 D661 to D665....... Specification Status Series specification E K Z Model Designation Valve Version Series B Standard spool D661 (5-way) L Stub shaft spool Ø.75 in. [19mm] D663 and D664 K Preseries specification Assigned at the factory Factory Identification Stub shaft spool Ø 1.38 in. [35mm] D665 Rated Flow Model Number P Standard spool D661 to D665 D Stub shaft spool Ø.63 in. [16mm] D662 Q N [gpm] at p N = 75 psi/land Q N [l/min] at p N = 5 bar/land Series 30 8 30 D661 60 16 60 D661 80 21 80 D661 01 40 150 D662 02 66 250 D662 03 92 350 D663 05 145 550 D664 10 265 1000 D665 15 400 1500 D665 Maximum Operating Pressure pp* Pilot Valve F 3,000 psi. At p x 3,000 psi (external) operating pressure H in port P, A, B and T up to 5,000 psi possible. H 4,000 psi. At p x 4,000 psi (external) operating pressure A/B/J/M in port P, A, B and T up to 5,000 psi possible. K 5,000 psi (not with pilot valves D630 and D631) A/B/J X Explosion proof version upon request Special specification Special version *3000 psi = 210 bar, 4000 psi = 280 bar, 5000 psi = 350 bar Main Spool Type A 4-way: ~ critical lap, linear characteristic D 4-way: 10% overlap, linear characteristic P 4-way: P A, A T: ~ critical lap, curvilinear characteristic P B: 60% overlap, curvilinear characteristic B T: 50% underlap, linear characteristic U 5-way: P A, P 2 B, A T: ~ critical lap, curvilinear characteristic Y 4-way: ~ critical lap, curvilinear characteristic Z 2x2-way: A T, B T 2 : ~ critical lap, linear characteristic X Special spool on request Pilot Stage or Pilot Valve For Valve Type A ServoJet Standard D661 P B ServoJet High flow D661 P D662 D D663/4 L M D630 2-stage, MFB D662/D663/D664 P H D631 2-stage, MFB D665 P J D661 ServoJet 2-stage, EFB D665 K Preferred configurations are highlighted. Options may increase price. Technical changes are reserved. All combinations may not be available. Please contact Moog. Type Designation........... 2 -. Signals for 100% Spool Stroke A ±10 V ±10 V (diff.) E D ±10 V 2 to 10 V (6 V centered position) E/S F ±10 V 2.5 to 13.5 V S M ±10 V 4 to 20 ma E/S T ±10 V ±10 V with dead band compens. (diff.) E X ±10 ma 4 to 20 ma E/S Y Valve Connector Command Output Connector others on request For Supply Voltage E 11+PE-pole EN 175201 Part 804 0 2 S 6+PE-pole EN 175201 Part 804 2 Seal Material N V NBR (Buna) Standard Pilot Connections and Pilot Pressure Supply X Return Y 4 internal internal 5 external internal 6 external external 7 internal external Spool Position of Main Stage with/without Electrical or Hydraulic Supply* *SV: Solenoid Valve **VE: Valve Electronics Supply Voltage Function Code 2 24 VDC (18 to 32 VDC) 0 special version ±15 V on request FPM (Viton) optional Other materials on request Connector O No enable input. Pin C not used S A Without enable signal applied the spool moves to S adjustable centered position (see page 5). B Without enable signal applied the spool moves into S defined end position A T or B T (see page 5). E Without enable signal applied the spool moves to E adjustable centered position. Position error monitored (see page 6) F Without enable signal applied the spool moves E into defined end position A T or B T Position error monitored (see page 6) G Without enable signal applied the spool moves to E adjustable centered position. Spool position monitored (see page 7) H Without enable signal applied the spool moves E into defined end position A T or B T Spool position monitored (see page 7) Parameters of the control electronics are adapted to the pilot pressure. See operating pressure on the nameplate and in this ordering information. O Undefined (no fail-safe function) for all valve types Mechanical fail-safe version Position p p[psi] or p x external [psi] for valves with pilot valve F P B, A T 360 A and B < 15 A and B D P A, B T 360 A and B < 15 A and B M Mid position defined 15 < 15 A and B Mid position undefined 15 360 A and B Mid position defined 15 215 H, J and M (2x2-way only) Electrically controlled fail-safe version Position pp[psi] px ext SV* VE** for valves with pilot valve W Mid position defined 15 215 off on all types Mid position undefined 15 < 15 on on only A and B Mid position defined 15 215 on off all types S P A, B T 15 215 off on all types P A, B T 15 215 on off all types P defined A T 15 215 off on only A and B (D661 only with px ext) P B, A T < 15 < 15 on off only A and B *15 psi = 1 bar, 215 psi = 15 bar, 360 psi = 25 bar Moog D660 Series 27
Argentina Australia Austria Brazil China Finland France Germany India Ireland Italy Japan Korea Luxembourg Norway Russia Singapore South Africa Spain Sweden United Kingdom USA TJWhite / PDF Moog Inc., Industrial Controls USA: +1-716-652-2000 Germany: +49-7031-622-0 Japan: +81-463-55-3615 For the location nearest you, visit www.moog.com/worldwide. CDL6562 Rev H 500-212 0405