> Conference 2012 Conference information
> Agenda Conference day 1 Dec 3, 2012 07:45 am Registration 08:30 am Welcome and introduction Ulrich Bartel I President and CEO I USA 08:50 am Polyolefin projects around the globe Klaus Kapfer I Head of Business Unit Extrusion Systems Polyolefins I Germany 09:10 am Conceptual development support along the process chain Christoph Schumacher I Head of Business Unit Plastics & Chemicals Materials Handling I Germany Malcolm Cartwright I Senior Sales Manager Logistic Solutions I Germany 09:55 am Coffee break 10:15 am Powder handling from reactor to extruder Bob Reischl I Manager Process Technology Materials Handling I USA 11:00 am Feeding of polymer powder, additives, liquids e. g. peroxide Michael Ahlgrimm I Sales Manager Extrusion Systems Polyolefins I Germany 11:45 am ZSK Twin Screw Compounder - Basics, requirements and improvements Frank Lechner I Head of Process Technology Compounding & Extrusion Germany 12:30 pm Lunch 01:45 pm ZSK extruders in polyolefin service Klaus Kapfer I Head of Business Unit Extrusion Systems Polyolefins I Germany 02:30 pm Design features of process section Kai Biresch I Project Sales Manager Polyolefins I Germany 03:05 pm Coffee break 03:25 pm Extruder gear boxes Bernhard Wengert I Head of Technical Service Compounding & Extrusion I Germany 04:10 pm Melt pump Michael Ahlgrimm I Sales Manager Extrusion Systems Polyolefins I Germany 05:00 pm Cocktail hour
> Agenda Conference day 2 Dec 4, 2012 08:15 am Welcome and customer service, staffing Ulrich Bartel I President and CEO I USA 08:45 am Extrusion - screening and pelletizing Jürgen Bartl I Product Manager Downstream Equipment I Germany 09:30 am Pellet cooling water system Eckhart Schukrafft I Manager Polyolefins Sales and Projects I USA 09:55 am Coffee break 10:15 am Pellet conveying and conditioning Richard Fischer I Head of Sales Key Accounts, Plastic Manufacturers, Bulk Material Plants I Germany 11:00 am Devolatilization in melt and solid phase Frank Lechner I Head of Process Technology Compounding & Extrusion I Germany Sven Troetsch I Head of Process Technology Materials Handling I Germany 12:15 pm Lunch 01:30 pm Finished product handling Malcolm Cartwright I Senior Sales Manager Logistic Solutions I Germany Bob Reischl I Manager Process Technology Materials Handling I USA 02:15 pm Coffee break 02:30 pm Optimization of extruder Kai Biresch I Project Sales Manager Polyolefins I Germany 03:00 pm Revamping and optimization of Materials Handling Plants Carsten Packeiser I Head of Service Sales Materials Handling I Germany 04:30 pm Panel discussion 04:10 pm Closing remarks Ulrich Bartel I President and CEO I USA 04:30 Cocktail hour
> Conference information >Conference venue Houston Marriott Westchase Hotel 2900 Briarpark Dr. Houston, Texas, 77042 USA Phone: +1 713 978-7400 www.marriott.com >Driving directions George Bush Intercontinental Airport-Houston - IAH - Follow John F Kennedy Blvd south. Turn right onto Texas 8 Beltway Frontage Rd. Merge onto North Sam Houston Pkwy E W/Sam Houston Tollway W/Texas 8 Beltway W via the ramp on the LEFT. Continue to follow Sam Houston Tollway W for 25.6 miles (partial toll road). Take the exit toward Briar Forest Dr and merge onto Texas 8 Beltway S/West Sam Houston Pkwy S. Travel 0.9 miles and turn left (east) onto Farm to Market 1093 E/Westheimer Rd. Travel 0.6 miles and turn right (south) onto Briarpark Dr. Hotel will be on your right. Directions to the Houston Marriott Westchase Hotel
> Conference information > contact details For more information please contact: Corporation Mr. Jai Patel Houston Office 3955 World Houston Parkway, Suite 190 Houston, TX 77032, USA Phone: +1 281 986-3653 jai.patel@coperion.com Corporation 663 East Crescent Avenue Ramsey, NJ 07446, USA Phone: +1 201 327-6300 info@coperion.com > We look forward to welcoming you to the Conference 2012!