IEEE Electromagnetic Compatibility Standards (Active & Archive) Collection: VuSpec



Similar documents
Millennium Product Inc. Model: Cell Shield / Zorb

Selected Radio Frequency Exposure Limits

Human exposure to RF

COMMON REGULATORY OBJECTIVES FOR WIRELESS LOCAL AREA NETWORK (WLAN) EQUIPMENT PART 2 SPECIFIC ASPECTS OF WLAN EQUIPMENT

EMC Standards: Standards of good EMC engineering

Dual Chamber Temporary External Pacemaker

Evaluating Cell Phone and Personal Communications Equipment and their EMC Effects on Automotive Audio and In-Cabin Modules

Analysis of Immunity by RF Wireless Communication Signals

EN v1.2.1 TEST REPORT FOR ag/Draft n WLAN PCI-E Mini Card MODEL NUMBER: BCM94322MC REPORT NUMBER: 07U

IEC TC106. Standards for the Assessment of Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 to 300 GHz

Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands)

Electromagnetic Compatibility Considerations for Switching Power Supplies

IEC and CISPR Standards

Product Safety and RF Exposure for Mobile Two-Way Radios Installed in Vehicles or as Fixed Site Control Stations

RF EXPOSURE LIMITS AND TESTING REQUIREMENTS

DT3: RF On/Off Remote Control Technology. Rodney Singleton Joe Larsen Luis Garcia Rafael Ocampo Mike Moulton Eric Hatch

Automated Meter Reading Frequently Asked Questions. What is AMR?

AN Application Note: FCC Regulations for ISM Band Devices: MHz. FCC Regulations for ISM Band Devices: MHz

The Existing Public Exposure Standards Cindy Sage, MA Sage Associates, USA

OpenWay Radio Frequency FAQ

Wireless Broadband: Health & Safety Information

Measurements of radiofrequency fields from a WEL Networks Smart Meter

Fibre Optic Solutions for your Test and Instrumentation needs

AKKREDITOITU TESTAUSLABORATORIO ACCREDITED TESTING LABORATORY MICROSOFT MOBILE OY TCC MICROSOFT

30 In Compliance October

TEST REPORT EN (1997) +A1 (2001)

Measurement of RF Emissions from a Final Coat Electronics Corrosion Module

Electromagnetic Field Safety

EMR Exposure Limits & Assessment Methods for Mobile Phone Communications. Lindsay Martin Manager, Non-Ionising Radiation Section

communication over wireless link handling mobile user who changes point of attachment to network

Thermal Effects of Mobile Phones

Attenuation Measurements of Materials Used in Construction of Buildings

Human Exposure Limits

ETSI TR V1.1.1 ( )

THE ANSI/IEEE RF SAFETY STANDARD AND ITS RATIONALE. Om P. Gandhi and Gianluca Lazzi Department of Electrical Engineering Salt Lake City, Utah 84112

How To Know If You Are Safe To Use An Antenna (Wired) Or Wireless (Wireless)

A Survey of Radiation Levels Associated with Mobile and Wireless Communication Technology Masts in Public Areas in Kaduna Metropolis

sources in our environment i.e. Natural and man-made. The sun, earth and ionosphere are the natural source.

Real-life Applications of ICNIRP Guidelines to Various Human EMF Exposure Issues

for Communication Systems Protection EMI CD-ROM INCLUDED

Electromagnetic Compatibility and International Regulatory Approvals

For many years the general public

Radio waves and health. Mobile communications

Draft ETSI EN V1.2.1 ( )

The field strength measurement and SAR experience related to human exposure in 110 MHz to 40 GHz

SERVICES BROCHURE info@t-r-s.com.au PO BOX 680, Claremont, 6910, Western Australia

EMC STANDARDS STANDARDS AND STANDARD MAKING BODIES. International. International Electrotechnical Commission (IEC)

Non-Ionizing Electromagnetic Radiation

Electromagnetic Radiation Compatibility Survey and Safety Analysis around Mobile Base Transceiver Stations: Case Studies around Kathmandu Valley

High Frequency Power Quality

Wireless Sensor Networks

Grounding Demystified

Radio Frequency Interference (RFI) Shielding Principles

TECHNICAL SPECIFICATION FOR GSM MOBILE TERMINALS

Summary of ICES TC34 Activities

EMC & Wireless Certification

Specific Absorption Rate (SAR) Induced in Human Heads of Various Sizes When Using a Mobile Phone

ARIB TR-T V Specific Absorption Rate (SAR) requirements and regulations in different regions

Rated Power(W) 8W 2. EG-LED W 3. EG-LED W

Smart meters: Compliance with radio frequency exposure standards

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1

RF Exposure and Modular Equipment. Considerations

EFFECTS OF ELECTROMAGNETIC FIELDS ON ORGANISMS AND PROTECTION PRINCIPLES

Electromagnetic Radiation (EMR) Testing Report Twenty-Five Schools, Peel District School Board

Radio Frequency Wireless Technology in Medical Devices. Guidance for Industry and Food and Drug Administration Staff

Electromagnetic (EM) waves. Electric and Magnetic Fields. L 30 Electricity and Magnetism [7] James Clerk Maxwell ( )

EMR COMPLIANCE HOW TO ENSURE YOUR NATA ACCREDITED CONTRACTOR IS ABLE TO PROVIDE A NATA ENDORSED REPORT

AN003. Evaluation of Anechoic Chambers For EMC Measurements Using A CNE. Overview. CNE III 9kHz to 2GHz Conducted and radiated output

Specific Absorption Rate (SAR) in the head of Tablet user's

Espotel Test Laboratory Services. November 20, 2014

Test Report #: Date: April 8, 2005

Low-cost EMI Pre-compliance Testing Using a Spectrum Analyzer

ETSI EN V1.1.1 ( )

Body SAR and EU. B. Derat

RF Measurements Using a Modular Digitizer

Effects of Mobile Phone Radiation onto Human Head with Variation of Holding Cheek and Tilt Positions

INTRODUCTION TO COMMUNICATION SYSTEMS AND TRANSMISSION MEDIA

RF safety at base station sites

SmartDiagnostics Application Note Wireless Interference

MsC in Advanced Electronics Systems Engineering

Waveguide Access Point WGA631. Product Guide

Effect of Metallic Materials on SAR

Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields

EMC Basics. Speaker : Alain Lafuente. Alain.lafuente@we-online.com

THE NARTE EMC ENGINEER CERTIFICATION PROCESS - A PERSONAL EXPERIENCE

Clean, Green and Safe Management System

MEMORANDUM. Amy Kahler, Director of Customer Service and Marketing Mike McCurnin, P.E., Director of Water Production

Human Exposure to Outdoor PLC System

#

ANSI Watthour Meter Testing & Certification Programs

Preview of Period 3: Electromagnetic Waves Radiant Energy II

Users Manual FA106 / FA306 version 1.0. Field Analyzer. FA106 and FA306. Users Manual

How To Understand The Safety Of A Cell Phone (Cell Phone)

WIRELESS INSTRUMENTATION TECHNOLOGY

Cable Solutions for Servo and Variable Frequency Drives (VFD)

Radio Frequency Exposure Test Report

Antennas & Propagation. CS 6710 Spring 2010 Rajmohan Rajaraman

STRATO LED Drivers 70W, Single output

MEASUREMENT AND ANALYSIS OF RF EME LEVELS FROM MOBILE TELEPHONE BASE STATIONS LOCATED AT LEICHHARDT, NSW

Transcription:

IEEE Electromagnetic Compatibility Standards (Active & Archive) Collection: VuSpec This value-packed VuSpec CD-ROM represents the most complete resource available for professional engineers looking for best practices and techniques covering the compatibility of the electromagnetic effects of systems with both themselves and their intended operating environments. It includes 52 active standards and 52 archive standards, measurement techniques, test procedures, instrumentation, equipment and systems characteristics, interference control techniques and components, educational tutorials, computational analysis, and spectrum management. ACTIVE IEEE Std 139-1988 (R2012), IEEE Recommended Practice for the Measurement of Radio Frequency Emission from Industrial, Scientific, and Medical (ISM) Equipment Installed on User's Premises IEEE Std 187-2003, IEEE Standard for Measurement Methods of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9 khz to 40 GHz IEEE Std 211-1997 (R2003), IEEE Standard Definitions of Terms for Radio Wave Propagation IEEE Std 299-2006, IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures IEEE Std 299.1-2013 - IEEE Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 m IEEE Std 377-1980 (R2008), IEEE Recommended Practice for Measurement of Spurious Emission from Land-Mobile Communication Transmitters ANSI/IEEE Std 469-1988 (R2008), IEEE Recommended Practice for Voice-Frequency Electrical-Noise Tests of Distribution Transformers IEEE Std 475-1980 (W2006),IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz IEEE Std 644-1994 (R2008), IEEE Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields From AC Power Lines IEEE Std 776-1992 (R2008), IEEE Recommended Practice for Inductive Coordination of Electric Supply and Communication Lines IEEE Std 1031-2011, IEEE Guide for the Functional Specification of Transmission Static Var Compensators 1031-2011, IEEE Guide for the Functional Specification of Transmission Static Var Compensators IEEE Std 1128-1998 (R2012), IEEE Recommended Practice for Radio-Frequency (RF) Absorber Evaluation in the Range of 30 MHz to 5 GHz IEEE Std 1140-1994 (R2006), IEEE Standard Procedures for the Measurement of Electric and Magnetic Fields From Video Display Terminals (VDTs) From 5 Hz to 400 khz IEEE Std 1302-2008, IEEE Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 18 GHz IEEE Std 1309-2013, IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 khz to 40 GHz IEEE Std 1460-1996 (R2008),IEEE Guide for the Measurement of Quasi-Static Magnetic and Electric Fields IEEE Std 1528-2013, IEEE Recommended Practice for Determining the Peak Spatial- Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement IEEE Std 1528a-2005, IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques

Amendment 1: CAD File for Human Head Model (SAM Phantom) SASB/SCC39-SCC39 - International Committee on Electromagnetic Safety 1528a-2005, IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head From Wireless Communications Devices: Measurement Techniques Amendment 1: CAD File for Human Head Model (SAM Phantom) IEEE Std 1560-2005 (R2012), IEEE Standard for Methods of Measurement of Radio- Frequency Power-Line Interference Filter in the Range of 100 Hz to 10 GHz IEEE Std 1597.1-2008, IEEE Standard for Validation of Computational Electromagnetics Computer Modeling and Simulations IEEE Std 1597.2-2010, IEEE Recommended Practice for Validation of Computational Electromagnetics Computer Modeling and Simulations IEEE Std P1642-2014 (Unapproved Draft), IEEE Draft Recommended Practice for Protecting Public Accessible Computer Systems from Intentional EMI IEEE Std P1688-2014 (Unapproved Draft), IEEE Draft Standard for Requirements for the Control of Electromagnetic Interference Characteristics of Replaceable Electronic Modules IEEE Std 1775-2010, IEEE Standard for Power Line Communication Equipment- Electromagnetic Compatibility (EMC) Requirements-Testing and Measurement Methods - IEEE Power & Energy Society/Power System Communications IEEE Std 2030-2011, IEEE Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation with the Electric Power System (EPS), End-Use Applications, and Loads -SASB/SCC21-SCC21 - Fuel Cells, Photovoltaics, Dispersed Generation, and Energy Storage IEEE Std C37.90.2-2004, IEEE Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers - IEEE Power & Energy Society/Power System Relaying C63 Series ANSI Std C63.2-2009, American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications ANSI Std C63.4-2014, American National Standard for Methods of Measurement of Radio- Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 khz to 40 GHz ANSI Std C63.5-2006, American National Standard Electromagnetic Compatibility- Radiated Emission Measurements in Electromagnetic Interference (EMI) Control- Calibration of Antennas (9 khz to 40 GHz) ANSI Std C63.7-2005, American National Standard Guide for Construction of Open-Area Test Sites for Performing Radiated Emission Measurements ANSI Std C63.9-2008, American National Standard for RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 Watts ANSI Std C63.10-2013, American National Standard for Testing Unlicensed Wireless Devices ANSI Std C63.12-1999, American National Standard Recommended Practice for Electromagnetic Compatibility Limits ANSI Std C63.13-1991, American National Standard Guide on the Application and Evaluation of EMI Power-Line Filters for Commercial Use ANSI Std C63.14-2009, American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) ANSI Std C63.15-2010, American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment ANSI Std C63.16-1993, American National Standard Guide for Electrostatic Discharge Test Methodologies and Criteria for Electronic Equipment

ANSI Std C63.17-2013, American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices ANSI Std C63.18-1997, American National Standard Recommended Practice for an On- Site, Ad Hoc Test Method for Estimating Radiated Electromagnetic Immunity of Medical Devices to Specie Radio-Frequency Transmitters ANSI Std C63.19-2011, American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids ANSI Std C63.22-2004, American National Standard Guide for Automated Electromagnetic Interference Measurements ANSI Std C63.23-2012, American National Standard Guide for Electromagnetic Compatibility Computations and Treatment of Measurement Uncertainty C95 Series IEEE Std C95.1-2005, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 khz to 300 GHz IEEE Std C95.1a-2010, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 khz to 300 GHz Amendment 1: Specifies Ceiling Limits for Induced and Contact Current, Clarifies Distinctions between Localized Exposure and Spatial Peak Power Density IEEE Std C95.1b-2004, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 khz to 300 GHz - Amendment 2: Specific Absorption Rate (SAR) Limits for the Pinna IEEE Std C95.2-1999 (R2005), IEEE Standard for Radio-Frequency Energy and Current- Flow Symbols IEEE Std C95.3-2002 (R2008), IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 khz-300 GHz IEEE Std C95.3.1-2010, IEEE Recommended Practice for Measurements and Computations of Electric, Magnetic, and Electromagnetic Fields with Respect to Human Exposure to Such Fields, 0 Hz to 100 khz IEEE Std C95.4-2002, IEEE Recommended Practice for Determining Safe Distances from Radio Frequency Transmitting Antennas When Using Electric Blasting Caps During Explosive Operations IEEE Std C95.6-2002, IEEE Standard for Safety Levels with Respect to Human Exposure to Electromagnetic Fields, 0-3 khz IEEE Std C95.7-2005, IEEE Recommended Practice for Radio Frequency Safety Programs, 3 khz to 300 GHz ARCHIVE IEEE Std 140-1950, IEEE Recommended Practice for Minimization of Interference from Radio-Frequency Heating Equipment IEEE Std 140-1990 (R1995), IEEE Recommended Practice for Minimization of Interference from Radio-Frequency Heating Equipment IEEE Std 187-1951, Standards on Radio Receivers: Open Field Method of Measurement of Spurious Radiation from Frequency Modulation and Television Broadcast Receivers IEEE Std 187-1990 (R1995), IEEE Standard on Radio Receivers: Open Field Method of Measurement of Spurious Radiation from FM and Television Broadcast Receivers IEEE Std 272-1970,IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers IEEE Std 291-1991, IEEE Standard Methods for Measuring Electromagnetic Field Strength of Sinusoidal Continuous Waves, 30 Hz to 30 GHz IEEE Std 296-1969, IEEE Standard Definitions of Terms, Letter Symbols, and Color Code for Hall Effect Devices

IEEE Std 299-1991, IEEE Recommended Practice for Measurement of Shielding Effectiveness of High-Per formance Shielding Enclosures IEEE Std 299-1997, IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures IEEE Std 299-2006 (R2012), IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures IEEE Std 376-1975 (W2004), IEEE Standard for the Measurement of Impulse Strength and Impulse Bandwidth - IEEE Std 473-1985 (W2006), IEEE Recommended Practice for an Electromagnetic Site Survey (10kHz to 10 GHz) IEEE Std 475-1983 (R1994), IEEE Standard Measurement Procedure for Field-Disturbance Sensors (rf Intrusion Alarms) 473-1985 (1994), IEEE Recommended Practice for an Electromagnetic Site Survey (10 khz to 10 GHz) IEEE Std 518-1982 (R1996), IEEE Guide for the Installation of Electrical Equipment to Minimize Electrical Noise Inputs to Controllers from External Sources ANSI/IEEE Std 644-1987 IEEE Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines IEEE Std 1309-1996, IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 khz to 40 GHz IEEE Std 1309-2005, IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 khz to 40 GHz IEEE Std 1528-2003, IEEE Recommended Practice for Determining the Peak Spatial- Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communicat ANSI/IEEE Std C37.90.2-1995, Draft American National Standard IEEE Trial-Use Standard Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers IEEE Std C37.90.2-1987 IEEE Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers C63 Series ANSI Std C63.2-1987, Electromagnetic Noise and Field Strength, 10 khz to 40 khz Specifications ANSI Std C63.2-1996, American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz-Specifications ANSI Std C63.4-1992, American National Standard for Methods of Measurement of Radio- Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 khz to 40 GHz ANSI Std C63.4-2001, Interim Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 khz to 40 GHz ANSI Std C63.4-2003, American National Standard for Methods of Measurement of Radio- Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 khz to 40 GHz ANSI Std C63.4-2009, American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements ANSI C63.5-1988, American National Standard for Electromagnetic Compatibility-Radiated Emission Measurements in Electromagnetic Interference (EMI) Control-Calibration of Antennas (9 khz to 40 GHz) ANSI Std C63.5-1998, ANSI Std C63.5-1998, American National Standard for Electromagnetic Compatibility-Radiated Emission Measurements in Electromagnetic Interference (EMI) Control-Calibration of Antennas (9 khz to 40 GHz) ANSI Std C63.5-2004, American National Standard for Electromagnetic Compatibility- Radiated Emission Measurements in Electromagnetic Interference (EMI) Control- Calibration of Antennas (9 khz to 40 GHz)

ANSI Std C63.6-1988, American National Standard Guide for the Computation of Errors in Open-Area - Test Site Measurements ANSI Std C63.6-1996, American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements ANSI Std C63.7-1988, American National Standard Guide for Construction of Open Area Test Sites for Performing Radiated Emission Measurements ANSI Std C63.7-1992, American National Standard Guide for Construction of Open-Area Test Sites for Performing Radiated Emission Measurements ANSI Std C63.12-1987, American National Standard for Electromagnetic Compatibility Limits-Recommended Practice ANSI Std C63.14-1992, American National Standard Dictionary for Technologies of Electromagnetic Compatibility (EMC), Electromagnetic Pulse (EMP), and Electrostatic Discharge (ESD) ANSI Std C63.14-1998, American National Standard Dictionary for Technologies of Electromagnetic Compatibility (EMC), Electromagnetic Pulse (EMP), and Electrostatic Discharge (ESD) ANSI Std C63.17-1998, American National Standard for Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices ANSI Std C63.17-2006, American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices ANSI Std C63.18 1997, Recommended Practice for an On-site, Ad-Hoc Test Method for Estimating Radiated Electromagnetic Immunity of Medical Devices to Specific Radio Frequency Transmitters ANSI Std C63.19-2001, American National Standard for Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids ANSI Std C63.19-2006, American National Standard for Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids ANSI Std C63.19-2007, American National Standard for Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids C95 Series ANSI Std C95.1-1982, American National Standard Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 300 khz to 100 GHz IEEE Std C95.1-1991, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 khz to 300 GHz IEEE Std C95.1-1999, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 khz to 300 GHz IEEE Std C95.1b-2004, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 khz to 300 GHz Amendment 2: Specific Absorption Rate (SAR) Limits for the Pinna ANSI Std C95.2-1982, American National Standard Radio Frequency Radiation Hazard Warning Symbol ANSI Std C95.3-1973 (R1979), American National Standard Techniques and Instrumentation for the Measurement of Potentially Hazardous Electromagnetic Radiation at Microwave Frequencies IEEE Std C95.3-1991, IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields-RF and Microwave ANSI Std C95.5-1981, American National IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 khz to 300 GHz

IEEE Errata & Interpretations IEEE 187-2003 Errata to IEEE Standard for Measurement Methods of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9 khz to 40 GHz IEEE Std 1031-2011, Errata to IEEE Guide for the Functional Specification of Transmission Static Var Compensators IEEE Std 1528-2013, Errata to IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEEE Std C95.1-2005, IEEE Standards Interpretations for IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 khz to 300 GHz LICENSING: SINGLE - USER EDITION: THIS PRODUCT IS LICENSED FOR ONE USER ONLY