Steering gear Rotary vane steering gear for smaller vessels The SR series is designed with integrated frequency controlled pumps. General description Rolls-Royce supplies a complete range of steering gear, suitable for all types and sizes of ships. The products are designed as complete steering systems with the actuator, power pack, steering control, alarm and rudder angle indicating system in mind, and can therefore be delivered with complete control systems, including control panels with start/stop, non-follow-up and follow-up, mode selection, alarm panels and rudder angle indicators or just a portion of this. The system is also prepared for interface to VDR, ships main alarm system, autopilot, joystick and DP when requested. Due to a wide range of demands, great care has been taken from material selection through construction, in order to meet the strictest quality demands. Key product benefits Compact Low weight Easy installation Easy maintenance High positioning accuracy No external moving parts Up to 70º rudder angle Available with steering control and rudder angle indicators as one complete system Built-in rudder carrier Polymer sealings internally for optimal tightness Simple and robust components Typical applications: Work boats Fishing vessels Offshore supply vessels Chemical/product tankers LPG tankers Smaller naval & coastguard vessels and auxiliaries Smaller cargo vessels Smaller passenger vessels Yachts 4
The Rolls-Royce series of rotary vane steering gears has been manufactured for more than 60 years, with more than 30 000 machines delivered. The principle of a rotary vane gives more flexibility when choosing the design and types of rudder, thanks to the rudder angles of up to 2 x 70º. The rotary vane principle also ensures a constant torque throughout the steering sequence, providing the gear with maximum power output at all rudder angles. This makes navigation through narrow straits or busy shipping channels safer, because maximum torque and steering time can always be achieved, resulting in improved manoeuvrability and improved control. Unique technical solutions ensure very low noise and vibration levels. The compact and simple design reduces weight and the number of components, which in turn secures fast and easy installation of the steering gear. The actuators are mounted directly on the rudder stock, without requiring the use of keys or keyways, facilitating easier assembly and dismantling of the rudder stock. The rudder torque is transmitted by hydraulic coupling or by hydraulic sleeve coupling/expansion rings (for the smaller machines). The naval series of rotary vane steering gear is designed to meet the highest standards for noise, shock and vibration. For naval applications without Milspec requirements the SR & RV ranges offer reliability and maintainability at low cost for a wide range of applications. The SR series of steering gear The SR series is suitable for small to medium-sized vessels. The steering gear is designed with integrated frequency controlled pumps. The pump utilises a reversible hydraulic pump motor together with a frequency converter to reduce the power consumption and to change the speed and the direction of the pump. The design gives smooth starting and stopping of the steering gear, and enables a precise analogue control system. The pump units are mounted directly on the rudder actuator, which lessens the need for piping work on board a vessel. Full frequency control means the pumps and motors are only running when a steering command is given, this reduces the amount of heat generated and leads to a cleaner hydraulic system, improving the lifetime of components. 1 2 3 1. Unique technical solutions minimise noise and vibration levels. 2. The pump units are mounted directly on the rudder actuator. 3. Red indicates pressurised oil. Green indicates return oil. Std. rudder Max. Max. Max. Weight Max. Max. stock working working mechanical approx. radial axial TYPE dia. (mm) pressure (bar) torque (knm) rudder angle (deg) (kg) load (kn) load (kn) SR562L 120 54 16 2 x 61 400 175 104 SR562 160 133 40 2 x 61 400 175 104 SR622 200 125 70 2 x 71,5 620 400 200 SR642 240 125 110 2 x 72 920 600 250 SR662 280 125 170 2 x 72 1800 700 354 SR722 300 125 275 2 x 72 2750 855 370 SR723 320 125 412 2 x 44 2800 855 370 SR742 340 125 433 2 x 72 3700 1400 480 SR743 360 125 650 2 x 44 3750 1400 480 *All rights reserved. All data subject to change without prior notice. 5
Rudders Classic rudders Type CB for lower speeds A bulbous profile and large vane end plates improve low speed manoeuvrability. It shares the same profile as the FB flap rudder and is typically used for offshore supply, cargo, fishing and seismic vessels. Heel connection module Classic rudder The classic rudder series, with no rudder angle limitation and optimised profile designs, provides an economical way of improving the manoeuvring capabilities of most vessels. To meet each vessels requirements, we offer tailored solutions that can be integrated as a package together with Rolls-Royce steering gear or as an integral part of the PROMAS Propulsion manoeuvring system. Furthermore, with few moving parts it is also easy to install and maintain. This ensures your vessel will have optimal reliability, excellent manoeuvrability and low life cycle costs. For transit speeds the directional stability of the vessel must be considered, we have developed and use advanced computer programs to simulate different manoeuvres such as the IMO criteria (zig-zag test), making it possible to evaluate different rudder sizes and types in order to optimise the rudder design for each vessel. 12
Type CM for medium speeds The profile is optimised to provide good manoeuvrability with propulsive efficiency, with a tapered or rectangular blade, meeting the rudder needs of passenger and cargo vessels. Ideal for use on passenger vessels and cargo vessels. Twisted leading edge 1 "Rudder Periodic Table" in principle 2 Increased manoeuvrability FB rudder Flap rudder with bulbous profile FM rudder Flap rudder with medium profile FS rudder Flap rudder with slim profile CB rudder Classic rudder with bulbous profile Estimated equal rudder area CM rudder Classic rudder with medium profile CS rudder Classic rudder with slim profile Increased propulsive efficiency 1. Rudder performance comparison, based on same area and aspect rudders in similar conditions. 2. Rudder designs are optimised in accordance with propeller and hull characteristics, in order to meet owner requirements for efficiency and manoeuvrability. 13
Rudders Classic rudders Type CS for higher speeds The slim profile increases overall propulsive efficiency and reduces cavitation risk. The blade is tapered with rounded corners. It has the same profile as the FS flap rudder. Ideal for use on passenger vessels, cruise ships, cargo carriers and high speed vessels. Twisted leading edge Key product benefits Easy installation Easy maintenance Custom-built to fit hull Optimal performance Suits all steering gear Available options: Steering gear foundation In-water-survey Automatic lubrication system Cathodic corrosion protection Custom rudder trunk Heel connection module Hydraulic nut for steering gear Water lubricated bearing Ice class Special bearings Stainless steel liners 14
Rudders Flap rudders Type FB for low to medium speeds This rudder has a bulbous profile for maximum manoeuvring performance. The design also has large upper and lower vane plates. It is ideal for use on workboats, fishing vessels, offshore vessels, small tankers, cargo vessels, ferries and other coastal vessels. Heel connection module Flap rudders Our flap rudder series provides both excellent low speed manoeuvring performance and high propulsive efficiency. A Flap rudder produces more sideforce than a classic rudder of equivalent size. Depending on shipowner requirements, a flap rudder may be used to reduce the overall area of a rudder whilst maintaining equal lift forces or may be used whenever there is a requirement for high manoeuvrability. Therefore a good understanding of Shipowner requirements is vital when designing a rudder. 15 As a supplier of both rudders and propellers, Rolls-Royce uses experience in cavitation prediction and hydrodynamics, generated from in-house model testing and in collaboration with leading European test centres, in order to optimise and document the manoeuvring performance of our rudders at low speeds. The r udders can also be optimised for higher speeds and the leading edge of the rudder can be twisted to improve the efficiency and cavitation characteristics of the rudder.
Rudders Flap rudders Type FM for medium speeds Designed with a moderate profile for enhanced manoeuvrability and propulsive efficiency. Ideal for use on passenger vessels and cargo vessels. Twisted leading edge 1 2 1. The leading edge of the medium and slim rudders can be twisted to improve efficiency and cavitation performance and to improve the manoeuvring performance of the rudder at low-speeds. 2. Trunk type: extended, with steering gear foundation or standard. Designed for minimum installation time and cost. The extended trunk is available with or without fairwater/shell plating. 16
Type FS for medium to high speeds A slim profile that is purpose-designed to suit the vessel. The rudder is built around a cast cone module and has a robust link mechanism and hinge system to withstand the high forces. It is also an ideal all-round flap rudder suitable for a wide range of vessel types. Twisted leading edge Key product benefits Easy installation Easy maintenance Custom-built to fit hull Optimal performance Suits all steering gear Available options: Steering gear foundation In-water-survey Automatic lubrication system Cathodic corrosion protection Custom rudder trunk Heel connection module Hydraulic nut for steering gear Water lubricated bearing Ice class Special bearings Stainless steel liners 17