Presentation of factory at Segmon, Grums municipal.
Office building
Office building
Office building
Storehouse
Space for annex
Preparatory work with plinths for the extension of sheet metal building by 42 x 42 m.
Garage and storehouse
Garage and storehouse
Planning 10
Planning 11
Boiler room 12
Boiler room 13
Various storage rooms 14
Planning 15
Various equipment in garage and storehouse. 16
Various equipment in garage and storehouse. 17
Various equipment in garage and storehouse. 18
Various equipment in garage and storehouse. 19
Various equipment in garage and storehouse. 20
Wheel loader Volvo 4400 in garage Volvo 4400 with scale equipment 21
Various fittings 22
Wheel loader Lundberg 23
Various machine equipment 24
Transformer station 10.000 volt 25
Production hall and storage 44x88 m 26
Production hall 27
Outgoing conveying belt for possible silo equipment 28
Production hall 29
Storehouse and reception hall whith reinforced sides 30
Storehouse Oil tank 50 m 3 31
This building includes a silo fore the dust firing with feeding-out equipment 32
Hopper with dosing feeder 33
Steel flaps for closing of storehouse 34
Truck scale 35
Burner for wood dust. Stared on LP-gas and oil. 36
Combustion chamber/pre-heat oven with ovenproof material 37
The one-way drum of Van den Broek 38
Outgoing pipes with stone filled drain 39
Maijer-mill grinder for fine decomposition 40
Fan room and fan 41
Sluice feeder 42
Cyclone for material to the intermediate storing 43
Intermediate storing 44
Various pipe systems for material 45
Pellet cooler and elevator for outgoing pellets 46
Outgoing conveying belt for pellets 47
Pellet cooler Overall view 48
Fine mill grinder for dust firing 49
Pellet press CPM 1,5 ton 50
Pelletspress CPM 4 ton run for approx 200 hours only 51
Pellet press CPM 2,5 ton 52
Electrictricity and control equipment 53
Flow chart 54
Flow chart Overall view from the control cabin 55
Control system in the control cabin 56
Controlcabin and staff room 57
Container whith electrical equipment and the control cabin 58
Cabling in the container with el. Equipment. 59
Electrical equipment in the container 60
Container in the work shop 61
Container in the work shop 62
Room for the installation of water-and air pressure 63
Fire extingguishing apparatus of water, air and firefly 64
Cleansing machine Container for wastage Electric power station for the drying oven and fans in case power drop out. 65
Unloading conveyor of loose pallets 66
Equipment for the production of small sacks Equipment for the filling of big sacks 67
Production of small sacks 68
Production of small sacks 69
outgoing roller table for pallets of small sacks Lifting hook for big sacks 70
Control equipment for the production of small sacks 71
Pallet rotating table 72
Container for wastage 73
Staff room for the production area of small sacks. 74
75 V-pellets pelletsfactory Grums County, Värmland, Sweden
76
77 V-pellets pelletsfactory Grums County, Värmland, Sweden
Machinery register of the pellet factory Belt conveyor, reception hopper Dryer: distributor reception hopper Conveyor belt, reception hopper Worm conveyor for drum dryer Drum dryer Main cyclone Sluice head cyclone Fan cyclone 1 Sluice cyclone 1 Sluice cyclone 2 Sluice cyclone 3 Worm conveyor for cyclones 1-3 Hammer mill Worm screw for elevator Elevator for buffer pocket Buffer pocket high/low Scraper conveyor for the presses Worm screw for dust mill Press 1 CPM Main engine 160 kw Cascade mixer Feeding screw Oil lubrication Grease lubrication Press 2 CPM Main engine 250 kw Cascade mixer Feeding screw, frequency converted Oil lubrication Feeding screw Press 3 CPM Main engine 250 kw Cascade mixer Feeding screw Oil lubrication Oil cooler Grease lubrication Conveyor for warm pellets Belt conveyor to the refrigerator Pellet refrigerator, outflow Fan for the pellet refrigerator Fan for the suction Elevator Belt conveyor Belt conveyor Dust burner Dust mill Combustion air fan Conveyor fan Conveyor fan Silo filter Filter fan Screw for dust silo Driving motor for dust silo Oil pump Dosing screw Sluice feeder Transformer station and switch gear Equipment for packing of small and big sacks Bulk carrier Truck scale, in ground Wheel loader incl. Scale Volvo BM Wheel loader Lundberg Miscellaneous sundries For wheel loader 4400 Fittings: High tilting shovel Pallet fork Filling chute for big bags Snow blade For Valmet 343 Fittings: Filling chute for big bags High tilting shovel Cleansing machine Farm tank 1500 litres Power station, run by diesel Cleansing machine, run by battery MIG welder Electric welder Gas welder Hydraulic press for exchange of bearing Spare parts - matrix etc. for plant equipment Workshop equipment Office equipment
V-PELLETS AB Kyrkbyns Industriområde SE-66040 Segmon Sweden Phone +46 (0)555 91900 Fax +46 (0)555-91905 Cell phone +46 (0)702 285111