Create an Incident When you need to report a failure or problem of your system to the IT help desk team, then send a request to the team. There are different modes of placing a request, such as submitting a request through the IT Help Desk Dashboard (ManageEngine Service Desk Plus), e-mail notification, and telephone call. The IT Help Desk Dashboard (ManageEngine Service Desk Plus) provides options to log details of a request originating in any of the above-mentioned forms. To create a new incident using the IT Help Desk Dashboard (ManageEngine Service Desk Plus) 1. Log in to the ServiceDesk Plus application using your WarriorID and password. 2. Click the or link available in the home page. Classifying Category The Category drop-down box, lists the categories under which an incident can be classified. Select the relevant category to which your incident request can be grouped. Describe Incident Request Once you have assigned the category and priority for the incident, describe the request in detail. The detailed request has two components to it, namely Subject and Description. In the Subject field, provide a relevant title to the incident that will exactly summarize your request content. Then, provide a detailed description with any other associated details relevant to the incident in the Description text box.
Add Attachments to the Request 1. Click the Attach File button. The Attach File pop-up window will appear 2. Click the Browse button. 3. From the file chooser window, choose the file to be attached. 4. Click Open. 5. Click Attach File. The chosen file gets listed in the table below the browse field. If you have more files to choose repeat the steps 2,3, and 4 till you have attached all the relevant files. 6. Click Attach File. The selected files are attached to the request. Once you have done all the above, click the Add request button. The request is added to the list of requests and can be viewed from the request list view which can be invoked by clicking on the Request tab in the header pane. Requests The Request module allows you to create incident requests and service requests instantly to your IT help desk team. You can view all the requests that you have raised till date and keep a track of its status. Apart from this, you can add additional information for a request in the form of Notes, Print only the required information and View the Survey Results for completed and closed requests. Request List View The Request List view page organizes and displays all the tickets you have raised to the help desk team. Click Requests tab in the header pane. The page redirects to the request list view page. In the Request List view, you have the facility to, View requests (incident and service requests) based on default filters View Archived Requests Create Incident and Service Requests Search requests based on Request ID and column-wise search Customize the columns in the List view
Representation of Icons in the list view: - indicates that the First Response time and Resolution time are overdue. - indicates overdue requests. - indicates First response time is overdue. - perform column - wise search for requests. - select columns to be displayed in the list view. This page includes various useful functionalities such as, 1. Filter drop-down menu: The Filter drop-down menu consists of default filter list and options to restrict the list view to display Service Requests, Incident Requests or both. Through the filter, you can also access the Archive Requests. 2. Searching Requests based on Request ID: View the details of a request instantly by entering the Request ID and click Go button. 3. Column-wise Search: Perform column-wise search for specific Groups, Requesters, Departments, Sites and so on. 4. New Incident: Create new incident requests instantly using the New Incident button. 5. Set the number of requests per page and navigation buttons: You can set the number of requests to be displayed in the request list view page. 6. Organizing the Request Order: Sort the order of the requests. Click the column name link to sort requests in ascending or descending order. Modes of Creating an Incident Request There are different modes of creating an incident request. One of them is using the web-based form. To use the Web-based form, you must have login access to the ServiceDesk application. If you do not have a login access to the application, then you can submit your request in either of the other two modes: 1. E-mail the request to the help desk team. This e-mail will automatically be changed to a new request in the ServiceDesk Plus application and any actions to be performed on the request will be immediately taken into notice. 2. Call up the IT help desk agent and report an issue or explain the nature of your request. The help desk agent will manually feed in the details into the application through the web-based New Incident form available in the Request module. View Request Details Follow the steps given below to view a request available in the ServiceDesk Plus Request module: The next page lists all the requests raised by you in the ServiceDesk Plus application. If there are any requests that have not been assigned any technician then they will appear in bold font. 2. Click the Subject link of the request that you want to view. The Request details page is displayed. 3. The request header has the Request ID, the Subject of the request, its Status and Priority. The Request tab consists of the Requester name, Created Date, Due Date, Request summary and Request Description. If there is a conversation thread, then the same can be viewed under Request Conversations. Below this, the details of the request such as the mode, request type, assigned technician and group, and so on are displayed. You can also view the details of the requester from the Requester Details block. If there are any attachments to request, click the file that is attached to view the same.
4. Click the Resolution tab to view the resolution for the request. 5. To view the history of the request, click the History tab. 6. To view all the replies that have been sent to you, click the Conversations button. All the notifications will be listed in the ascending order of the date and time when they were sent. The Created Date field displays the time when you created the request. Based on the priority of the request, the Due Date is calculated and is displayed beside the Created Date in the request details block. If you have received any response for the request, then you will see the Responded Date also in the view request page. Close Request ServiceDesk Plus provides you the privilege to reopen or close your requests from the Self Service Portal. When the technician moves the status of your request to Resolved, a Close button is displayed in the request details page. And, when the technician moves the status of your request to Closed or Resolved, a Reopen button is displayed in the request details page. NOTE: The Reopen and Close buttons are made available to requesters only if the administrator has enabled these options in the Self Service Portal Settings. Close a Request You can close requests when the technician has moved the request status to Resolved. To close resolved requests, 2. Click the Subject link of the request that you want to close. 3. In the Request details page, click the Close button. A Close Request dialog box appears. 4. Enter relevant Comments for closing the request. 5. Click Close button. The status of the request is moved to Closed. If you do not want to closethe request, then click Cancel in Close Request dialog box. Print the Request You can print the details of a request from the Request details page. ServiceDesk Plus also gives you an option to print only the required information. To print a request, 2. Click the Subject link of the request that you want to print. 3. Click Actions drop-down menu and select Print Preview link. The Print Preview of the request opens in a pop-up window. 4. You can customize the required information that you want to print by select the check box beside the fields. 5. Click Print button. 6. The default printer associated with your workstation is invoked. Set the required options and click OK. You can collect the printed copy of the request at the printer that is linked to your workstation.
Add a Note After posting a request, if you want to add additional information about the request, then you can it in the form of Notes. To add a note to a request, 2. Click the Subject link of the request to which you would like to add a note. 3. In the Request details page, click Actions drop-down menu. Select Add Notes link. The Add Notes opens in a popup. 4. Enter your content in the text box below the Request ID. 5. You can notify the technician in-charge of your request about the addition of the note by selecting E-mail the technician for notes addition check box. 6. Click Add Note button. The note is added at the bottom of the request along with the date and time. You can add any number of notes to a request. The notes added to a request will be displayed at the bottom of the request in the View Request page in the descending order, that is, the recently added note will be displayed first. NOTE: You will not be able to delete any of the notes in a request even though you have added them. View Request History The various actions performed on a request can be viewed in the History tab. This is essential for future reference and audit purpose. To view the request history, 2. Click the Subject link of the request for which you want to view the history. 3. In the Request details page, click the History tab. This displays the complete history of actions that were performed on the request from the time of its creation. The details that are displayed in the History are in the ascending order with the earliest performed action shown at the top of the page and the latest action at the bottom of the page. View All Replies The IT help desk team sends notifications to you during the course of solving the issue submitted. Your responses to the technicians will also be displayed as threads / conversation. You can view these conversations from your own login view. 2. Click the Subject link of the request to view the conversations. 3. In the Request details page, the various mails between you and the technician in-charge will be displayed under the head Conversations.
View Requests based on Filters You can view requests based on default filters and also restrict the list view to display only Service Requests, Incident Requests or both Service and Incident Requests. You can also view the list of your archived requests by clicking Archived Requests link To view requests based on filters, 2. Select the Filter drop-down menu to view the default filters. My Open Requests - This is the default status on opening the request list view page. All your open requests will be listed under this option. My Requests On Hold - All your assigned requests that are kept on hold will be listed under this option. My Overdue Requests - All your assigned requests that have exceeded the due date are listed under this option. My Pending Requests - All your assigned unfinished requests are listed under this option. My Completed Requests - All your assigned requests that are closed will be listed under this option. My Closed Requests - All your requests with the status as closed will be listed under this option. All My Requests - All your requests irrespective of the status will be listed under this option. Awaiting Approval - All your requests that are awaiting approval from the concern authority are listed under this option. Waiting for my update - If you are assigned as the Intermediate Editor for any service requests, then the service requests that are waiting for your update is listed under this option. Updated by me - If you are assigned as the Intermediate Editor for service requests, then the requests updated by you are listed under this option. If you have the permission to view requests raised from your Department or Site, then the following filters will be available to you.