PERI Software Finder These guidelines are designed to help you find the most suitable PERI software for your formwork and scaffolding planning. At the same time, it provides comprehensive information on the various programs. Please follow the flowchart and and answer the questions. What do you want to plan? PERI formwork systems Page 2 PERI scaffold systems Page 3 PERI formwork systems and PERI scaffold systems (more information on page 11) Page 1
PERI formwork systems no Do you work with an Autodesk product? (ADT, AutoCAD etc.) yes Start Page no Do you want to set up a CAD work place? yes Option 1 ELPOS 3.4 (more information on page 5) Recommendation: ADT 2006 with (more information on page 11) Which Autodesk product do you use? (overview on page 4) Option 2 ELPOS with CAD functions Formwork 4.0 (more information on page 6) Option 1 no Have you found the suitable PERI CAD version? yes Option 1 Upgrade / downgrade of your Autodesk software (overview on page 4) Upgrade = switch to a higher version Downgrade = switch to a lower version (more information on page 11) Option 2 Option 3 De-installation of your Autodesk software and installation of ELPOS with CAD functions Formwork 4.0 (more information on page 6) Use of ELPOS 3.4 parallel to your CAD-Software (more information on page 5) Option 2 Option 3 PERI CAD Formwork 3.0 (more information on page 8) PERI CAD Formwork 2.1 (more information on page 7) For purchasing PERI software, please contact your local PERI sales engineer. If you have any questions regarding PERI software, call + 49 (0) 73 09 / 95 0-8 88 or email CAD.hotline@peri.de Page 2
PERI scaffold systems no Do you work with an Autodesk product? (ADT, AutoCAD etc.) yes Start Page Option 1 Option 2 Planning facade scaffold / shoring Planning facade scaffold only Which Autodesk product do you use? (overview on page 4) You require PERI CAD and therefore Autodesk software. (overview on page 4) ELPOS with CAD functions Scaffolding 1.0 (more information on page 6) Option 1 no Have you found the suitable PERI CAD version? yes Option 1 Upgrade / Downgrade of your Autodesk software (overview on page 4) Upgrade = switch to a higher version Downgrade = switch to a lower version (more information on page 11) Option 2 De-installation of your Autodesk software and installation of ELPOS with CAD functions Scaffolding 1.0 (more information on page 6) Option 2 Option 3 PERI CAD Scaffolding 3.0 (more information on page 10) PERI CAD Scaffolding 1.2 (more information on page 9) For purchasing PERI software, please contact your local PERI sales engineer. If you have any questions regarding PERI software, call + 49 (0) 73 09 / 95 0-8 88 or email CAD.hotline@peri.de Page 3
Overview This table contains the correct PERI CAD version for your Autodesk product. Start Page PERI formwork systems PERI scaffold systems Autodesk product PERI Software for formwork planning PERI Software for scaffold planning Versions before ADT 3.0 - - - - - - ADT 3.0, ADT 3.3 PERI CAD Formwork 2.1 PERI CAD Scaffolding 1.2 ADT 2004 PERI CAD Formwork 3.0 PERI CAD Scaffolding 3.0 ADT 2005, ADT 2007 - - - - - - Recommendation ADT 2006 Versions before AutoCAD 2000 - - - - - - AutoCAD 2000, 2000i, 2002 PERI CAD Formwork 2.1 - - - AutoCAD 2004 PERI CAD Formwork 3.0 - - - AutoCAD 2005, 2006, 2007 - - - - - - Versions before MDT 5 - - - - - - MDT 5, MDT 6 PERI CAD Formwork 2.1 - - - MDT 2004 PERI CAD Formwork 3.0 - - - MDT 2005, MDT 2006, MDT 2007 - - - - - - AutoCAD LT - - - - - - ADT (Architectural Desktop) = enhanced AutoCAD for architectural applications MDT (Mechanical Desktop) = enhanced AutoCAD for mechanical engineering - - - = no PERI CAD version available is compatible to demo versions of ADT 2006 (30 days only) PERI CAD has limited compatibility to MDT PERI CAD is not compatible to AutoCAD LT or non-licenced versions Page 4
Start Page PERI Formwork Systems ELPOS 3.4 is a fast and easy to use planning tool for daily work processing. It provides automatic support for standard systems and basic functions for manual changes. Use of ELPOS 3.4 only requires basic PC skills, CAD knowledge is not a pre-requirement. ELPOS 3.4 has been designed for users who need quick and simple standard solutions on the jobsite. Technically complex presentation of detailed solutions plays a subordinate role in this case. ELPOS 3.4 Formwork Systems TRIO 270, TRIO 330, TRIO Alu, DOMINO 250, DOMINO 300, HANDSET SKYDECK, MULTIFLEX Working and Safety Scaffold ASG 160, Folding Platform FB 180 No other systems available None available Pentium Processor or equivalent / 64 MB Memory Operating System Windows 95 Not required Users with basic knowledge of Windows Optional; on request: 1-day basic seminar for beginners 1-day workshop for advanced users Handbook (German), Online Help (German/English), Quick Ref. (German/English), Tips & Tricks (German) Yes; unlimited but no printing and saving Yes; unlimited, confirmation of student status required Page 5
ELPOS with functions of CAD ELPOS Formwork 4.0 / ELPOS Scaffolding 1.0 Start Page PERI Formwork Systems PERI is part of the new generation of ELPOS software. As an AutoCAD OEM product, ELPOS (CAD) offers powerful CAD functions in addition to the automatic and semi-automatic design support for PERI formwork systems. AutoCAD basic knowledge is required in order to use ELPOS (CAD) successfully. ELPOS (CAD) has been designed for users who already have AutoCAD experience or are prepared to supplement their skills through training or self-study. The learning phase is considerably longer compared to ELPOS 3.4 but the design results can (for all PERI systems) be justified due to superior presentation and details provided by the software. ELPOS Formwork 4.0 ELPOS Scaffolding 1.0 Formwork Systems TRIO 270, TRIO 330, TRIO Alu, DOMINO 250, DOMINO 300 SKYDECK, MULTIFLEX Timber, Girders, Props, Push-Pull Props, HD 200, ST 100, PD 8, RUNDFLEX, GRV All other PERI formwork systems manually manual: PERI UP T 70 / T 100 Facade, PERI UP Rosett Facade, All PERI formwork systems manually PERI UP T 70 / T 100 Facade, PERI UP Rosett Facade, manual: Pentium 4 Processor or equivalent / 512 MB Memory Operating System Windows 2000 (SP 3), XP (SP 1) MS Internet Explorer 6 Users with basic AutoCAD knowledge Recommended; 2-day basic seminar for beginners 1-day workshop for advanced users *Handbook Part 1 (German), *Handbook Part 2 (German/English), Online Help (German/English) Yes, unrestricted 30-day test version Yes, limited to 2 years confirmation of student status required *Handbook Part 1 = AutoCAD basics, Handbook Part 2 = PERI functions Page 6
Start Page PERI Formwork Systems PERI CAD Formwork 2.1 is an AutoCAD application for professional PERI formwork system planning. PERI CAD is installed as a supplement to AutoCAD or ADT and provides PERI tools for formwork planning as well as extensive CAD functions. PERI CAD Formwork 2.1 Formwork Systems TRIO 270, TRIO 330, TRIO Alu, DOMINO 250, DOMINO 300 SKYDECK, MULTIFLEX Timber, Girders, Props, Push-Pull Props, HD 200, ST 100, PD 8, RUNDFLEX, GRV All other PERI formwork systems manually manual: PERI UP T 70 / T 100 Facade, PERI UP Rosett Facade, Pentium 4 Processor or equivalent / 1 GB Memory Operating System Windows 2000 (SP 3), XP (SP 1) CAD-Software AutoCAD 2000 / ADT 3.0 AutoCAD 2000i / ADT 3.0 AutoCAD 2002 / ADT 3.3 MS Internet Explorer 6, MS Excel CAD user with good/very good AutoCAD or ADT knowledge No longer offered Handbook (German/English), Online Help (German/English) Not available Yes; unlimited, confirmation of student status required ADT (Architectural Desktop) = extended AutoCAD version for architectural requirements MDT (Mechanical Desktop) = extended AutoCAD version for mechanical engineering requirements PERI CAD is not compatible with AutoCAD LT or unlicensed versions. PERI CAD is compatible with AutoCAD and ADT demo versions (limited to 30 days) PERI CAD has restricetd compatibality with MDT Page 7
Start Page PERI Formwork Systems PERI CAD Formwork 3.0 is an AutoCAD application for professional PERI formwork system planning. PERI CAD is installed as a supplement to AutoCAD or ADT and provides PERI tools for formwork planning as well as extensive CAD functions. PERI CAD Formwork 3.0 Formwork Systems TRIO 270, TRIO 330, TRIO Alu, DOMINO 250, DOMINO 300 SKYDECK, MULTIFLEX Timber, Girders, Props, Push-Pull Props, HD 200, ST 100, PD 8, RUNDFLEX, GRV All other PERI formwork systems manually manual: PERI UP T 70 / T 100 Facade, PERI UP Rosett Facade, Pentium 4 Processor or equivalent / 1 GB Memory Operating System Windows 2000 (SP 3), XP (SP 1) CAD-Software AutoCAD 2004 / ADT 2004 MS Internet Explorer 6, MS Excel CAD user with good/very good AutoCAD or ADT knowledge No longer offered Handbook (German/English), Online Help (German/English) Not available Yes; unlimited, confirmation of student status required ADT (Architectural Desktop) = extended AutoCAD version for architectural requirements MDT (Mechanical Desktop) = extended AutoCAD version for mechanical engineering requirements PERI CAD is not compatible with AutoCAD LT or unlicensed versions. PERI CAD is compatible with AutoCAD and ADT demo versions (limited to 30 days) PERI CAD has restricetd compatibality with MDT Page 8
Start Page PERI PERI CAD Scaffolding 1.2 is an AutoCAD application for professional PERI scaffold system planning. PERI CAD is installed as a supplement to ADT and provides PERI tools for scaffold planning as well as extensive CAD functions. PERI CAD Scaffolding 1.2 Formwork Systems All PERI formwork systems manually PERI UP T 70 / T 100 Facade, PERI UP Rosett Facade, Pentium 4 Processor or equivalent / 1 GB Memory Operating System Windows 2000 (SP 3), XP (SP 1) CAD-Software ADT 3.0 / ADT 3.3 MS Internet Explorer 6, MS Excel CAD user with good/very good AutoCAD or ADT knowledge No longer offered Handbook (German/English), Online Help (German/English) Not available Yes; unlimited, confirmation of student status required ADT (Architectural Desktop) = extended AutoCAD version for architectural requirements MDT (Mechanical Desktop) = extended AutoCAD version for mechanical engineering requirements PERI CAD is not compatible with AutoCAD LT or unlicensed versions. PERI CAD is compatible with AutoCAD and ADT demo versions (limited to 30 days) PERI CAD has restricetd compatibality with MDT Page 9
Start Page PERI PERI CAD Scaffolding 3.0 is an AutoCAD application for professional PERI scaffold system planning. PERI CAD is installed as a supplement to ADT and provides PERI tools for scaffold planning as well as extensive CAD functions. PERI CAD Scaffolding 3.0 Formwork Systems All PERI formwork systems manually PERI UP T 70 / T 100 Facade, PERI UP Rosett Facade, Pentium 4 Processor or equivalent / 1 GB Memory Operating System Windows 2000 (SP 3), XP (SP 1) CAD-Software ADT 2004 MS Internet Explorer 6, MS Excel CAD user with good/very good AutoCAD or ADT knowledge No longer offered Handbook (German/English), Online Help (German/English) Not available Yes; unlimited, confirmation of student status required ADT (Architectural Desktop) = extended AutoCAD version for architectural requirements MDT (Mechanical Desktop) = extended AutoCAD version for mechanical engineering requirements PERI CAD is not compatible with AutoCAD LT or unlicensed versions. PERI CAD is compatible with AutoCAD and ADT demo versions (limited to 30 days) PERI CAD has restricetd compatibality with MDT Page 10
Start Page PERI Formwork Systems PERI is an AutoCAD application for professional PERI formwork and scaffold system planning. PERI CAD is installed as a supplement to ADT and provides PERI planning tools as well as extensive CAD functions. Formwork Systems TRIO 270, TRIO 330, TRIO Alu, DOMINO 250, DOMINO 300 SKYDECK, MULTIFLEX Timber, Girders, Props, Push-Pull Props, MP Tower, HD 200, ST 100, PD 8, RUNDFLEX Plus, RUNDFLEX, GRV All other PERI formwork systems manually PERI UP T 70 / T 100 Facade, PERI UP Rosett Facade, Pentium 4 Processor or equivalent / 1 GB Memory Operating System Windows 2000 (SP 4), Windows XP (SP 2) CAD-Software ADT 2006 (SP 1) MS Internet Explorer 6 (SP 1), MS Excel CAD user with good/very good AutoCAD or ADT knowledge Recommended; 2-day basic seminar for beginners 1-day workshop for advanced users Handbook (German/English), Online Help (German/English) Yes, unrestricted 30-day test version Yes, limited to 1 year confirmation of student status required ADT (Architectural Desktop) = extended AutoCAD version for architectural requirements MDT (Mechanical Desktop) = extended AutoCAD version for mechanical engineering requirements PERI CAD is not compatible with AutoCAD LT or unlicensed versions. PERI CAD is compatible with AutoCAD and ADT demo versions (limited to 30 days) PERI CAD has restricetd compatibality with MDT Page 11