PR o ACTIVE Components Catalogue for I.V. giving sets, blood giving sets, and other medical devices
INDEX I.V. Set Small drip chambers I.V. Set Big drip chambers In-line drip chambers pg. 3 3 5 Blood giving set drip chambers 5 Spikes and stepped connector Caps for male connetctor and male connector Needless connectors Connectors with non-return valve Tubing connectors Connectors for pump Injection ports Clamps (roller and slide) Patient side terminals Butterflies Female connector and female connector caps Burettes 3-way stopcocks Manifolds Tubings Flow regulators Components for enteral nutrition Withdrawal Cannulae Scissor clamps and forceps Break-off tip connectors / vial stoppers IV In-line s 6 6 7 8 8 9 10 10 11 11 12 13 13 14 15 16 16 17 17 17 18 Ed. 06/2016
SMALL DRIP CHAMBERS Small drip chamber () with non-vented spike () 15 µm solution (PE + Nylon) Code: IC0200 Carton Quantity: 2000 pcs. Pallet Quantity: - Small drip chamber () with vented spike () with Hydrophobic into air-intake 15 µm solution (PE + Nylon) mm 48 Code: IC0201 Carton Quantity: 2000 pcs. Pallet Quantity: - mm 48 Small drip chamber () with vented spike () with Hydrophobic into air-intake and ON/OFF cap 15 µm solution (PE + Nylon) Code: IC0202 Carton Quantity: 2000 pcs. Pallet Quantity: - Small drip chamber () for photosensitive with non-vented spike () 15 µm solution (PE + Nylon) mm 48 Code: IC0200OP Carton Quantity: 2000 pcs. Pallet Quantity: - Small drip chamber () for photosensitive with vented spike () with Hydrophobic into air-intake 15 µm solution (PE + Nylon) mm 48 mm 48 Code: IC0201OP Carton Quantity: 2000 pcs. Pallet Quantity: - Small drip chamber () for photosensitive with non-vented spike () 15 µm solution (PE + Nylon) Code: IC0202OP Carton Quantity: 2000 pcs. Pallet Quantity: - BIG DRIP CHAMBERS drip chamber () with non-vented spike () and 15 µm solution (PA) mm 48 Code: IC0251 Carton Quantity: 1000 pcs. Pallet Quantity: - drip chamber (SB) with non-vented spike and 15 µm solution (PA) glueable with cyclohexanone mm 61 Code: IC2102 Carton Quantity: 1200 pcs. Pallet Quantity: - Without by by mm 55 3
drip chamber () with vented spike () with Hydrophobic into air-intake and ON/OFF cap 15 µm solution (PA) mm 61 Code: IC0252 Carton Quantity: 1000 pcs. drip chamber ( -) with vented spike ( -) with Hydrophobic into air-intake and ON/OFF cap 15 µm solution (PA) Code: IC0252DF Carton Quantity: 1000 pcs. Pallet Quantity: - drip chamber (SB) with vented spike (ABS) with Hydrophobic into air-intake and ON/OFF cap 15 µm solution (PA) drip chamber () for photosensitive with non-vented spike () and 15 µm solution (PA) glueable with cyclohexanone Code: IC2101 Carton Quantity: 1000 pcs. Pallet Quantity: - mm 61 mm 55 mm 61 Code: IC0251OP drip chamber (SB) for photosensitive with non vented spike and 15 µm solution (PA) Carton Quantity: 1000 pcs. Pallet Quantity: - glueable with cyclohexanone Code: IC2102OP Carton Quantity: 1200 pcs. Pallet Quantity: - mm 55 drip chamber () for photosensitive with vented spike () with Hydrophobic into air-intake and ON/OFF cap 15 µm solution (PA) mm 61 Code: IC0252OP drip chamber ( -) for photosensitive with vented spike ( -) with Hydrophobic into air-intake and ON/OFF cap 15 µm solution (PA) Carton Quantity: 1000 pcs. Pallet Quantity: - mm 61 Code: IC0252OPDF Carton Quantity: 1000 pcs. Pallet Quantity: - drip chamber (SB) for photosensitive with vented spike (ABS) with Hydrophobic into air-intake and ON/OFF cap 15 µm solution (PA) glueable with cyclohexanone mm 55 Code: IC2101OP Carton Quantity: 1200 pcs. Pallet Quantity: - 4 Without by by
IN-LINE DRIP CHAMBERS Small in-line drip chamber () with one-way top-part fit to tubing with o.d. 4.1mm 15 µm solution (PE + Nylon) 20 15 µm Code: IC0239 Carton Quantity: 2000 pcs. Pallet Quantity: - in-line drip chamber (SB) with top-part (ABS) suitable for tube connection glueable with cyclohexanone Code: IC2103 Carton Quantity: 1200 pcs. Pallet Quantity: - mm 55 in-line drip chamber (SB) for photosensitive with top-part (ABS) suitable for tube connection glueable with cyclohexanone mm 55 Code: IC2103OP Carton Quantity: 1200 pcs. Pallet Quantity: - TRASFUSION DRIP CHAMBERS drip chamber () for blood giving set with non-vented spike (ABS) 200 µm blood (PE + PA) 20 200 µm Code: TC0200 Carton Quantity: 500 pcs. Pallet Quantity: - drip chamber () or blood giving set with vented spike () with Hydrophobic into air-intake and ON/OFF cap 200 µm blood (PE + Nylon) 20 200 µm Code: TC0201 Carton Quantity: 500 pcs. Pallet Quantity: - Without by by 5
SPIKES AND STEPPED CONNECTOR In-line vented spike (ABS) with cap assembled Stepped cone adaptor for tube with. o.d. 10.1 mm in clear ABS Code: IC0301 CAPS FOR MALE CONNECTOR AND MALE CONNECTORS Symmetric male luer cap in PE Carton Quantity: 30000 pcs. Code: IC2201 Male Luer Lock Cap in PE Code: IC0237 Carton Quantity: 30000 pcs. Code: IC0250 Male Luer Lock connector for tubing with o.d. 4.1 mm in clear ABS Male Luer Lock connector for tubing with o.d. 4.1 mm in Opaque ABS for set suitable for photosensitive Carton Quantity: 20000 pcs. Code: IC0244 Carton Quantity: 25000 pcs. Code: IC0245 Male Luer Lock connector for tubing with i.d. 3.0 mm in claer ABS Male Luer Lock connector for tubing with i.d. 3.0 mm in Opaque ABS for set suitable for photosensitive Carton Quantity: 25000 pcs. Code: IC0241 Carton Quantity: 25000 pcs. Code: IC0240 Male Luer Lock connector fit to flashball in clear ABS Male Luer Lock connector fit to flashball in Opaque ABS for set suitable for photosensitive Carton Quantity: 25000 pcs. Code: IC0248 Carton Quantity: 25000 pcs. Code: IC0249 Rotating Male Luer Lock connector for tubing with o.d. 4.1 mm in clear Rotating Male Luer Lock connector for tube with i.d. 3.0 mm assembled with Hydrophobic cap Carton Quantity: 25000 pcs. Code: IC0608 Carton Quantity: 25000 pcs. Code: IC0700 Adaptor luer male for tube o.d. 3,5 mm / i.d. 4,5 mm in clear - Rotating Male Luer Lock connector in ABS for tube with o.d. 5.0 mm Carton Quantity: Available also in blue PA (IC2202A) Code: IC2202 Code: IC2203 Carton Quantity: 6 Without by by
NEEDLE-FREE CONNECTORS Needle- valve with Luer Lock female / Luer Lock male adapters Needle- valve, opaque for photosensitive, with Luer Lock female / Luer Lock male adapters Code: IC2606 Carton Quantity: 6.000 Code: IC2606OP Needle- valve with Luer Lock female connector / adapter for tube o.d. 4.1 mm Available also for tube o.d. 2.0 mm (IC2602) Needle- valve, opaque for photosensitive, with Luer Lock female connector / adapter for tube o.d. 4.1 mm Available also for tube o.d. 2.0 mm (IC2602OP) Carton Quantity: 6.000 Code: IC2601 Carton Quantity: 6.000 Code: IC2601OP Carton Quantity: 6.000 Y Needle- port with adapters for tube o.d. 4.1 mm Available also for tube o.d. 3.0 mm (IC2604) Y Needle- port, opaque for photosensitive, with adapters for tube o.d. 4.1 mm Available also for tube o.d. 3.0 mm (IC2604OP) Code: IC2603 Carton Quantity: 6.000 Code: IC2603OP Carton Quantity: 6.000 Needle- valve with Luer Lock female / Luer Lock male adapter Needle- valve with Luer Lock female connector / adapter for tube o.d. 4.1 mm Neutral Neutral Available also for tube o.d. 2.0 mm (IC2609) Code: IC2607 Carton Quantity: 6.000 Code: IC2608 Mini-spike with air inlet with 0,2 µm and Needle valve with Luer Lock female adapter Mini-spike without air inlet and Needle- valve with Luer Lock female adapter Carton Quantity: 6.000 Code: IC2701 Code: IC2605 Carton Quantity: 6.000 spike with air inlet with 0,2 µm and Needle- valve with Luer Lock female adapter Spike without air inlet and Needle- valve with Luer Lock female adapter Code: IC2702 Code: IC2703 Carton Quantity: 6.000 spike with air inlet with valve 0,2 µm and Needle- valve with Luer Lock female adapter 3-Way Stopcock with rotating male luer lock connector and Needle- valve with Luer Lock female adapter Code: IC2704 Code: IC2705 Carton Quantity: 6.000 Without by by 7
CONNECTORS WITH NON-RETURN VALVE Non-return valve with Luer Lock female / Luer Lock male adapter in clear ABS Max : 21 bar Available also white (IC2204B) and orange (IC2204G) HP Non-return valve with Luer Lock female / Luer Lock male adapter in clear ABS Max : 85 bar Code: IC2204 Code: IC2205 Non-return valve with tube Non-return valve with o.d. 3,0x4,1mm adapter / Luer 6,8 mm tube adapters in Lock male adapter in clear clear ABS ABS Max : 21 bar Max : 21 bar Availeble also clear blue (IC2207A), white (IC2207OP), blue (IC2207AOP Code: IC2206 Code: IC2207 Double Non-return valve with tube 3,0x4,1mm adapter / Luer Lock male adapter / luer lock female adapter in clear ABS Double Non-return valve with o.d. 4,1mm tube adapter / Luer Lock male adapter / luer lock female adapter in clear ABS Max : 21 bar Max : 21 bar Code: IC2208 Code: IC2209 Tubing conncectors 3-way Y-connetctor (3x tube with o.d. 4,1 mm) in clear ABS 3-way Y-connetctor (3x tube with i.d. 4,5/4,8 mm) in clear ABS Code: IC2210 Code: IC2214 5-way Y-connetctor (5x tube with o.d. 4,1 mm) in clear ABS 5-way Y-connetctor (4x tube with o.d. 4,1 mm+ 1 x 3,0 mm) in clear ABS Code: IC2212 Code: IC2213 3-way T-connector (2 x tube with i.d. 4,5/4,8 mm, 1x tube with i.d. 3,5 mm) in claer - 3-way Y-connetctor (2 x luer Lock female adapter, 1x tube with o.d. 4,1 mm) in clear ABS Available also white (IC2215OP) Code: IC2216 Code: IC2215 in-line mesh for tubing with i.d. 3.0 mm in clear. Standard mesh 15 µ m. Other mesh (from 15 up to 200 µ m) available by. 15 µm Code: IC2300 Without by by 8
Tubing connector size 4/4 mm in PA Tubing connector size 4/7 mm in PA Code: IC2217 Code: IC2218 Tubing connector size 4/10 mm in PA Tubing connector size 4/13 mm in PA Code: IC2219 Code: IC2220 Tubing connector size 7/7 mm in PA Tubing connector size 7/10 mm in PA Code: IC2221 Code: IC2222 Tubing connector size 7/13 mm in PA Tubing connector size 10/10 mm in PA Code: IC2223 Tubing connector size 10/13 mm in PA Code: IC2224 Tubing connector size 13/13 mm in PA Code: IC2225 CONNECTORS FOR PUMP Code: IC2226 Pump connector for tubing with o.d. 6,8 mm and silicon segment with i.d. 5,0 mm in - Pump connector for tubing with o.d. 6,8 mm and silicon segment with i.d. 4,0 mm in - Code: IC2227 Code: IC2228 Pump connector for tubing with o.d. 4,1 mm and silicon segment with i.d. 3,0 mm in white PC Pump connector for tubing with o.d. 4,1 mm and silicon segment with i.d. 3,5 mm in white PC E.G.: Fresenius pump E.G.: Compact pump available also red (IC2229R) and blue (IC2229A) Code: IC2229 Code: IC2230 Pump connector for tubing with o.d. 4,1 mm and silicon segment with i.d. 3,0 mm in red ABS Pump connector for tubing with o.d. 4,1 mm and silicon segment with i.d. 3,0 mm in white PC E.G.: Ivac pump E.G.: Merck pump Code: IC2231 available also suitable ring (IC2233) in clear PC Code: IC2232 Without by by 9
INJECTION PORTS Flashball in Polyisoprene (latex-) Y Injection point (latex-) with body in clear ABS and port in Polyisoprene with grip wings Code: IC0238 Carton Quantity: 20000 pcs. Rivetted injection point (latex-) with body in PC and port in Polyisoprene Code: IC0800 CLAMPS Small roller body in white PE Carton Quantity: 30000 pcs. mm 10 mm 48 Code: IC0220 Small roller body in blue PE Carton Quantity: 20000 pcs. mm 10 mm 48 Code: IC0203 Small roller body in natural PE Carton Quantity: 12500 pcs. Code: IC0204 Small roller body in red PE mm 10 Carton Quantity: 12500 pcs. mm 48 mm 10 Code: IC0205 Small roller body in natural PS Carton Quantity: 12500 pcs. Code: IC0207 mm 10 mm 48 Small Roller wheel in violet PE Carton Quantity: 12500 pcs. mm 10 mm 48 Code: IC0208 Small Roller wheel in natural PE Carton Quantity: 12500 pcs. mm 11 Code: IC0206 Small Roller wheel in red PE Carton Quantity: 12500 pcs. mm 11 Code: IC0211 Small Roller wheel in yellow PE Carton Quantity: 50000 pcs. mm 11 Code: IC0213 Small Roller wheel in blue PE Carton Quantity: 50000 pcs. mm 11 Code: IC0209 Small Roller wheel in natural PS Carton Quantity: 50000 pcs. mm 11 Code: IC0210 Small Roller wheel in green PE Carton Quantity: 50000 pcs. mm 11 Code: IC0214 Standard Open roller body in white* ABS *other colour available by Carton Quantity: 50000 pcs. mm 11 mm 53 Code: IC0212 Standard Roller wheel in white* HD PE *other colour available by Carton Quantity: 50000 pcs. mm 13 Code: IC0603 Carton Quantity: 3500 pcs. Code: IC0604 Carton Quantity: 40000 pcs. Without by by 10
PATIENT-SIDE TERMINALS Flashball (latex-) (rif. IC0800) + symmetric male luer connector + symmetric male luer cap (rif. IC0237) Code: IC0215 Carton Quantity: 10000 pcs. Pallet Quantity: - Flashball (latex-) (rif. IC0800) + male luer lock connector (rif. IC611) + male luer lock cap (rif. IC0607) Code: IC0216 Carton Quantity: 7000 pcs. Pallet Quantity: - Flashball (latex-) (rif. IC0800) + symmetric male luer connector + hypodermic needle Code: IC0217 Carton Quantity: 2000 pcs. Pallet Quantity: - BUTTERFLIES Code: IC0241 Carton Quantity: Code: IC0240 Carton Quantity: butterlfy for tube 1.5x2.5 mm (butterlfy + needle + cap) butterlfy for tube 1.3x2.8 mm gauge available and butterlfy color: 19 18 19 20 21 22 23 24 25 27 gauge available and butterlfy color: 19 18 19 20 21 22 23 24 25 27 Code: IC0221 Carton Quantity: 25000 pcs. Code: IC0222 butterlfy for tube 1.5x2.5 mm butterlfy for tube 1.3x2.8 mm Carton Quantity: 25000 pcs. gauge available and butterlfy color: 19 18 19 20 21 22 23 24 25 27 gauge available and butterlfy color: 19 18 19 20 21 22 23 24 25 27 Code: IC0224 Carton Quantity: 25000 pcs. Code: IC0225 butterlfy for tube 1.5x2.5 mm Carton Quantity: 25000 pcs. gauge available and butterlfy color: 19 18 19 20 21 22 23 24 25 27 Code: IC0223 Carton Quantity: 25000 pcs. Without by by 11
FEMALE CONNECTORS AND FEMALE CONNECTOR CAPS Female Luer lock connector in ABS for tubing with o.d. 2.5 mm Female Luer lock connector in ABS for tubing with o.d. 1.8 mm Code: IC0226 Carton Quantity: 50000 pcs. Code: IC0227 Female Luer Rekord connector withpluginsoft for tubing with o.d. 2.5 mm Female Luer Rekord connector withpluginsoft for tubing with o.d. 1.8 mm Carton Quantity: 50000 pcs. Code: IC0242 Carton Quantity: 25000 pcs. Code: IC0243 Female Luer Lock connector for tube with o.d. 3,65 mm in clear ABS Female Luer Lock connector for tube with o.d. 5,0 mm in clear ABS Carton Quantity: 25000 pcs. Code: IC2234 Code: IC2235 Female Luer Lock connector for tube with o.d. 4,0 mm in green - Female Luer Lock connector for tube with o.d. CH14 in green - Code: IC2236 Code: IC2237 Female Luer Lock connector for tube with i.d. 4,8 mm in clear - Female Luer Lock connector for tube with o.d. 2,8 mm in clear - Code: IC2238 Code: IC2239 Female Luer Lock connector for tube with o.d. 5,0 mm in clear ABS Female Luer Lock connector for tube with o.d. 6,8 mm in clear ABS available also for o.d. 5,5 mm (IC2240B) Code: IC2240 Code: IC2241 Female Luer Lock connector for tube with o.d. 7,2 mm in clear ABS Female Luer Lock cap in PE Code: IC2242 Female Luer Lock cap in PE Code: IC0228 Female Luer Lock cap ABT in PE Code: IC0230 Carton Quantity: 50000 pcs. Code: IC0229 Carton Quantity: 50000 pcs. Without by by 12
BURETTES 150 ml Burette with air intake with hydrophobic and on/off cap top-part with injection point valve drip cahambe with micro-droppper 15 µm solution 60 15 µm Code: IC0151 Carton Quantity: Pallet Quantity: - 150 ml Burette with air intake with hydrophobic and on/off cap top-part with injection point Code: IC0150 Carton Quantity: Pallet Quantity: - 100 ml Burette with air intake with hydrophobic and on/off cap top-part with injection point valve drip cahambe with micro-droppper 15 µm solution 60 15 µm Code: IC0101 Carton Quantity: Pallet Quantity: - 3-WAY STOPCOCKS 3-Way Stopcock with male luer slip cone divertor: Natural HD PE 3-Way Stopcock with male luer slip cone divertor: Blue HD PE Code: IC0701 Carton Quantity: 3500 pcs. Code: IC0703 3-Way Stopcock with male luer slip cone divertor: red HD PE 3-Way Stopcock with male luer slip cone divertor: yellow HD PE Carton Quantity: 3500 pcs. Code: IC0702 3-Way Stopcock for tubing with i.d. 3.0 mm (inside gluing) divertor: white HD PE Carton Quantity: 3500 pcs. Code: IC0704 Carton Quantity: 3500 pcs. 3-Way Stopcock for tubing with i.d. 3.0 mm (inside gluing) divertor: blue HD PE Code: IC0711 Carton Quantity: 3500 pcs. Code: IC0713 Carton Quantity: 3500 pcs. 3-Way Stopcock for tubing 3-Way Stopcock for tubing with i.d. 3.0 mm with i.d. 3.0 mm (inside gluing) (inside gluing) divertor: red HD PE divertor: yellow HD PE Code: IC0712 Carton Quantity: 3500 pcs. Code: IC0714 Without by by Carton Quantity: 3500 pcs. 13
3-Way Stopcock for tubing with o.d. 4.1 mm (outside gluing) divertor: white HD PE 3-Way Stopcock for tubing with o.d. 4.1 mm(outside gluing) divertor: blue HD PE Code: IC0716 Carton Quantity: 3500 pcs. Code: IC0718 Carton Quantity: 3500 pcs. 3-Way Stopcock for tubing 3-Way Stopcock for tubing with o.d. 4.1 mm with o.d. 4.1 mm (outside gluing) (outside gluing) divertor: red HD PE divertor: yellow HD PE Code: IC0717 Carton Quantity: 3500 pcs. Code: IC0719 3-Way Stopcock with rotating male luer lock connector divertor: white HD PE 3-Way Stopcock with rotating male luer lock connector divertor: blue HD PE Carton Quantity: 3500 pcs. Code: IC0706 Carton Quantity: 3000 pcs. Code: IC0708 Carton Quantity: 3000 pcs. Code: IC0730 (with 3caps) Carton Quantity: 3000 pcs. Code: IC0731(with 3caps) 3-Way Stopcock with rotating male luer lock connector divertor: red HD PE 3-Way Stopcock with rotating male luer lock connector divertor: yellow HD PE Carton Quantity: 3000 pcs. Code: IC0707 Carton Quantity: 3000 pcs. Code: IC0709 MANIFOLDS Manifold with three 3-way stopcock body: PC - divertor: HD PE all female Carton Quantity: 3000 pcs. Code: IC0721 Carton Quantity: 550 pcs. Pallet Quantity: - Manifold with three 3-way stopcock body: PC - divertor: HD PE One Rot. male Code: IC0723 Carton Quantity: 550 pcs. Pallet Quantity: - Code: IC0728 (red/white/blue) Carton Quantity: 550 pcs. Pallet Quantity: - Without by by 14
Manifold with four 3-way stopcock body: PC - divertor: HD PE all female Code: IC0724 Carton Quantity: 445 pcs. Pallet Quantity: - Manifold with four 3-way stopcock body: PC - divertor: HD PE One Rot. male Code: IC0725 Carton Quantity: 445 pcs. Pallet Quantity: - Manifold with five 3-way stopcock body: PC - divertor: HD PE all female Code: IC0722 Carton Quantity: 340 pcs. Pallet Quantity: - Manifold with five 3-way stopcock body: PC - divertor: HD PE One Rot. male Code: IC0726 Carton Quantity: 340 pcs. Pallet Quantity: - Code: IC0729 (R/G/W/Y/B) Carton Quantity: 340 pcs. Pallet Quantity: - TUBINGS all the tubings below are available many other diameters tubing with diameter tubing with diameter 3.0 x4.1 mm 3.0 x4.1 mm opaque for photosensitive Code: XC0005 Carton Quantity: 5000 pcs. Code: XC0007 - tubing with diameter 3.0 x4.1 mm EVA tubing with diameter 3.0 x4.1 mm opaque for photosensitive Carton Quantity: 5000 pcs. Code: XC0006 Carton Quantity: 5000 pcs. Code: XC0008 Carton Quantity: 5000 pcs. Without by by 15
5 5 FLOW REGULATORS Flow regulator with scale 0-250 50 60 20 30 40 5 10 OFF 250 OPEN Code: IC0802 Carton Quantity: 2000 pcs. Pallet Quantity: - Flow regulator with scale 0-350 20 10 Appr OFF OPEN 5 ml/h off 10 20 30 40 10% scale 50 60 80 100 120 150 200 OPEN ml/h 350 250 210 165 125 100 80 60 50 40 30 20 10 5 Appr OFF Code: IC0802/A Carton Quantity: 2000 pcs. Pallet Quantity: - Flow regulator with double (for solution density 10% and for soultion density 40%) scale 0-250 OFF 10 20 10 20 30 42 50 42 50 62 75 62 83 83 104 125 104 125 150 167 167 200 250 200 ml/h 40% 10% Open 42 30 20 20 10 10 OFF OPEN 40% 10% Code: IC2004 Carton Quantity: 2000 pcs. Pallet Quantity: - COMPONENTS FOR ENTERAL NUTRITION Red drip-chamber for enteral nutrition with ventilation valve Blue drip-chamber for enteral nutrition with ventilation valve Code: IC2243 Carton Quantity: Code: IC2244 Adaptor for wide mouth bottle for enteral nutrition in white ABS available also red (IC2245R) and blue (IC2245A) Adaptor for wide mouth bottle for enteral nutrition in white ABS with packing ring in - available also red (IC2246R) and blue (IC2246A) Code: IC2245 Code: IC2246 Male Luer Lock connector / enteral nutrition cone in white ABS + cap Male Luer Lock connector / enteral nutrition cone in violet ABS available also violet (IC2247V) available also white (IC2247B) Code: IC2247 Code: IC2248 Without by by 16
Withdrawal Cannulae Vented withdrawal cannula (ABS) for transfer and reconstitution by closed circuit of with hydrophobic 1,2 µm air, female luer lock connection and green snap-cap (PP). Snap-cap open Snap-cap closed Code: IC2801 Carton Quantity: 1800 Vented withdrawal cannula Snap-cap open (ABS) for transfer and reconstitution by closed circuit of with hydrophobic 1,2 µm air, 5 µm solution, female luer lock connection and blue snapcap (PP). Snap-cap closed 5µm Code: IC2802 Carton Quantity: 1800 Vented withdrawal cannula Snap-cap open (ABS) for transfer and reconstitution by closed circuit of with hydrophobic 0,2 µm (protection from toxic aerosols air, 5 µm solution, female luer lock connection and red snap-cap (PP). Code: IC2803 Carton Quantity: 1800 SCISSOR CLAMPS / FORCEPS scissor towel clamp in PA (reinforced with glass fibre) Snap-cap closed scissor towel clamp in PA (reinforced with glass fibre) 5µm Color green 56 mm long Color red 156 mm long Code: TC2201V Forceps clear Polystyrol Code: TC2201R Code: TC2202 PLUGS Spigot in PP for closing of the funnels on catheter and tube Makorolon vial stopper in PC for tubing with i.d. 6.8 mm Code: IC0218 Carton Quantity: BREAK-OFF TIP CONNECTORS Break-off tip connector in PC for tubing with i.d. 6.8 mm Code: IC0219 Carton Quantity: Code: IC0218 Carton Quantity: Without by by 17
2 In-line IV adult square s with 10 cm of filtration area 5 micron clear fit to tube 3.0 x 4.1 mm filtration area: 10 cm 2 Housing: Clear modified Acrylic Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.03 micron) Minimun flow rate: 95ml/min Code: IC3000 Carton Quantity: 3.600 Code: IC3000OP 1.2 micron clear fit to tube 3.0 x 4.1 mm filtration area: 10 cm 2 Housing: Clear modified Acrylic Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.03 micron) Minimun flow rate: 52 ml/min Other technical specification: 5µm 5 micron fit to tube 3.0 x 4.1 mm for photosensitive filtration area: 10 cm 2 Housing: amber/opaque modified Acrylic Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.03 micron) Minimun flow rate: 95ml/min Carton Quantity: 3.600 -Dimension: width 30.0 mm, depth 6.5 mm, length 60 mm (including tube connectors), 40 mm ( body) -Weight: 5.2 gr -Effective filtration: 99.9999% -Ref. standard: ISO 8536-4 -Minimun water bubble point: 3.7-4.8 bar Maximun operating temperature: 5-40 C -Priming volume >2.4 ml 5 micron Code: IC3002 Carton Quantity: 3.600 Code: IC3002OP 0.2 micron clear fit to tube 3.0 x 4.1 mm filtration area: 10 cm 2 Housing: Clear modified Acrylic Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.03 micron) Minimun flow rate: 20 ml/min 1.2 micron 0.2 micron 1.2 micron fit to tube 3.0 x 4.1 mm for photosensitive filtration area: 10 cm 2 Housing: amber/opaque modified Acrylic Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.03 micron) Minimun flow rate: 52 ml/min Code: IC3001 Carton Quantity: 3.600 Code: IC3001OP 1.2 µm 0.2 µm 0.2 micron fit to tube 3.0 x 4.1 mm for photosensitive filtration area: 10 cm 2 Housing: amber/opaque modified Acrylic Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.03 micron) Minimun flow rate: 20 ml/min 5 micron 1.2 micron Carton Quantity: 3.600 0.2 micron Carton Quantity: 3.600 5µm 1.2 µm 0.2 µm Without by by 18
In-line IV Adult and Paediatric oval s 5 micron clear paediatric fit to tube i.d. 2.8 -> 3.0 mm filtration area: 6.1 cm 2 Housing: clear ABS Solution : Hydrophilic Vent : Hydrophobic PTFE membrane 5 micron 5µm 5 micron clear adult fit to tube i.d. 2.8 -> 3.0 mm filtration area: 10.9 cm 2 Housing: Clear ABS Solution : Hydrophilic Vent : Hydrophobic PTFE membrane 5 micron 5µm Code: IC3104 Code: IC3105 5 micron clear paediatric fit to tube i.d. 2.8 -> 3.0 mm filtration area: 6.1 cm 2 Housing: clear ABS Solution : Hydrophilic Vent : Hydrophobic PTFE membrane 1.2 micron 5 micron clear adult fit to tube i.d. 2.8 -> 3.0 mm filtration area: 10.9 cm 2 1.2 µm 1.2 µm Housing: Clear ABS Solution : Hydrophilic Vent : Hydrophobic PTFE membrane 1.2 micron Code: IC3101 Code: IC3103 5 micron clear paediatric fit to tube i.d. 2.8 -> 3.0 mm filtration area: 6.1 cm 2 Housing: clear ABS Solution : Hydrophilic Vent : Hydrophobic PTFE membrane 0.2 micron 5 micron clear adult fit to tube i.d. 2.8 -> 3.0 mm filtration area: 10.9 cm 2 0.2 µm 0.2 µm Housing: Clear ABS Solution : Hydrophilic Vent : Hydrophobic PTFE membrane 0.2 micron Code: IC3100 Code: IC3102 Without by by 19
2 In-line IV adult square s with 5 cm of filtration area 5 micron clear fit to tube 3.0 x 4.1 mm filtration area: 5 cm 2 Housing: clear PP Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.5 micron) Minimun flow rate: 50ml/min Code: IC3202 Carton Quantity: 4.000 Code: IC3202OP 1.2 micron clear fit to tube 3.0 x 4.1 mm filtration area: 5 cm 2 Housing: clear PP Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.5 micron) Minimun flow rate: 50 ml/min 5 micron 5 micron fit to tube 3.0 x 4.1 mm for photosensitive filtration area: 5 cm 2 Housing: amber/opaque PP Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.5micron) Minimun flow rate: 50ml/min Code: IC3201 Carton Quantity: 4.000 Code: IC3201OP 0.2 micron clear fit to tube 3.0 x 4.1 mm filtration area: 5 cm 2 Housing: clear PP Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.5 micron) Minimun flow rate: 10 ml/min 1.2 micron 0.2 micron 5µm 1.2 µm 0.2 µm 1.2 micron fit to tube 3.0 x 4.1 mm for photosensitive filtration area: 5 cm 2 Housing: amber/opaque PP Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.5 micron) Minimun flow rate: 50 ml/min 0.2 micron fit to tube 3.0 x 4.1 mm for photosensitive filtration area: 5 cm 2 Housing: amber/opaque PP Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.5 micron) Minimun flow rate: 10 ml/min 5 micron Carton Quantity: 4.000 1.2 micron Carton Quantity: 4.000 0.2 micron 5µm 1.2 µm 0.2 µm Code: IC3200 Carton Quantity: 4.000 Code: IC3200OP Carton Quantity: 4.000 Other technical specification: -Dimension: width 29.0 mm, depth 8.3 mm, length 40 mm ( body) -Weight: 5.6 gr -Effective filtration: 98% -Ref. standard: ISO 8536-4 Maximun operating temperature: 5-40 C Without by by 20
In-line IV adult/paediatric round s 5 micron clear fit to tube 3.0 x 4.1 mm filtration area: 4.2 cm 2 Housing: clear PP Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.5 micron) Minimun flow rate: 50ml/min 5 micron 5µm 5 micron fit to tube 3.0 x 4.1 mm for photosensitive filtration area: 4.2 cm 2 Housing: amber/opaque PP Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.5micron) Minimun flow rate: 50ml/min 5 micron 5µm Code: IC3205 Carton Quantity: 5.000 Code: IC3205OP 1.2 micron clear fit to tube 3.0 x 4.1 mm filtration area: 4.2 cm 2 Housing: clear PP Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.5 micron) Minimun flow rate: 50 ml/min Code: IC3204 Carton Quantity: 5.000 Code: IC3204OP 0.2 micron clear fit to tube 3.0 x 4.1 mm filtration area: 4.2 cm 2 Housing: clear PP Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.5 micron) Minimun flow rate: 10 ml/min 1.2 micron 0.2 micron 1.2 µm 0.2 µm 1.2 micron fit to tube 3.0 x 4.1 mm for photosensitive filtration area: 4.2 cm 2 Housing: amber/opaque PP Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.5 micron) Minimun flow rate: 50 ml/min 0.2 micron fit to tube 3.0 x 4.1 mm for photosensitive filtration area: 4.2 cm 2 Housing: amber/opaque PP Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.5 micron) Minimun flow rate: 10 ml/min Carton Quantity: 5.000 1.2 micron Carton Quantity: 5.000 0.2 micron 1.2 µm 0.2 µm Code: IC3203 Carton Quantity: 5.000 Code: IC3203OP Carton Quantity: 5.000 Other technical specification: -Dimension: diameter 31 mm ( body) -Weight: 3.8 gr -Effective filtration: 98% -Ref. standard: ISO 8536-4 Maximun operating temperature: 5-40 C Without by by 21
2 In-line IV s with 20 cm of filtration area 0.2 micron clear fit 0.2 micron fittotub to tube to tube 3.0 x 4.1 mm 3.0 x 4.1 mm for photosensitive filtration area: 20 cm 2 0.2 µm filtration area: a: 20 0cm 2 Housing: Clear modified Acrylic Housing: amber/opaque modified Acrylic Solution : Hydrophilic Solution : Hydrophilic Vent : Hydrophobic PTFE membrane (0.03 micron) Vent : Hydrophobic PTFE membrane (0.03 micron) Minimun flow rate: 37 ml/min Minimun flow rate: 37 ml/min Code: IC3004 Carton Quantity: 3.600 Code: IC3004OP Carton Quantity: 3.600 0.2 micron 0.2 micron 0.2 µm Other technical specification: -Dimension: width 30.0 mm, depth 6.5 mm, length 60 mm (including tube connectors), 40 mm ( body) -Weight: 5.8 gr -Effective filtration: 99.9999% -Ref. standard: ISO 8536-4 -Minimun water bubble point: 3.7-4.8 bar Maximun operating temperature: erature 5-40 C -Priming volume >1.6 ml Without by by 22
PR o ACTIVE LIMITS OF RESPONSIBILITY - It is your responsibility to validate the proposed material. We guarantee only the dimensional characteristics of the part and under no circumstances does our liability extend to the end product in wich it is found. In the case of dimensional noncompliance, we shall take back the parts in question and exchange them. We shall not be held responsible for the later use of the supplied pieces. We cannot guarantee the behavior of the piece with ragard to: gluing, sealing, welding (ultrasound or high frequency) nor for the different means of sterilization used: gas gamma ray, beta ray, accellerated electrons, dry or humyd steams, etc. The same applies to the different chemical, biochemical, substances or biological liquids in contact with the part. It is your responsability to check compliance of the material and the dimension of the part with the processes it shall undergo and the required purpose. PRO-ACTIVE S.r.l. ADDRESS: VIALE DEL COMMERCIO, 12-45100 ROVIGO - ITALY TELEPHONE: +39.0425.491087 - +39.0425.1885138 FAX: +39.0425.490101 E-MAIL GENERAL INFORMATIONS: COMMERCIAL AND ADMINISTRATION INFORMATIONS: info@proactivesrl.it barbara.bozzolan@proactivesrl.it TECHNICAL INFORMATIONS AND REGULATORY AFFAIRS: fabio.mazzocchi@proactivesrl.it COMPANY DATA CAP. STOCK 90.000,00 VAT: IT01248310292 BANK CODE: Cassa di Risparmio del Veneto - IBAN: IT 33 G 06225 12203 100000001146 - BIC: IBSP IT 2P www.proactivesrl.it