12/2010 Original Operating Instructions 999285502 en-gb Please retain for future reference Bolt-on castor set B rt. n 586168000 2008 models onward
Basic drawings of product Product description The Bolt-on caster set B turns the stacking pallet into a fast and manoeuvrable transport trolley. Suitable for drive-through access openings > 90 cm. The Bolt-on caster set B can be mounted to the following multi-trip packaging items: oka stacking pallets oka accessory box "Bolt-on castor set B" consists of: 2 heavy-duty wheels () 2 castor wheels (B) Total weight: 33.8 kg Before every use B 92815-204-01 oka accepts no liability for products that have been altered! Repairs may only be carried out by the manufacturer! Check for any signs of damage or visible deformation. Wheeling WRNING on t use the oka stackling pallet and the oka accessory box with assembled bolt-on castor set B on slab formwork. The floor must be stable, firm and sufficiently smooth (e.g. concrete). Max. gradient of floor: 3% Max. speed 4 km/h (walking pace) Either bridge any openings in the floor with sufficiently strong planking/boards secured so that they cannot slip away to either side, or close off openings with sufficiently strong side railings! Keep the travel route clean and free of any obstacles. It is forbidden to use any mechanical assistance during the wheeling operation! It is forbidden to wheel stacking pallets that have been stacked on top of one another! ifting by crane The Bolt-on castor set B can stay attached to the stacking pallet or the accessory box while this is being lifted. Before attaching the lifting chain, check that: the fixing brake () is applied the clamping wedge () of the heavy-duty wheel has been hammered firmly into place the linch pin (C) has been mounted to the fastening bolt of the castor wheel Crack-free and notch-free welds No deformation 2 999285502-12/2010
Mounting the heavy-duty wheel on the inside Suitable for drive-through access openings > 900 mm. On stacking pallets manufactured up to and including 2007 It is only possible to mount the heavy-duty wheels on the outside. 92815-218-01 b... < 900 mm Raise the stacking pallet by min. 'a'=120 mm by means of hardwood blocking. b a c 92815-201-01 a... 120 mm c... 220 mm pply the fixing brake () on the heavy-duty wheel. oosen the clamping wedge (). Tilt the adapter (E) down. 92815-215-01 E 999285502-12/2010 3
Fit a formwork hammer (F) between the handle (G) and the mounting plate (H). Pass the heavy-duty wheel under the pallet. Hammer the clamping wedge () firmly into place. 92815-206-02 F G H 92815-800 Where needed, you can adjust the braking force with the setting screw (width-across 24). Working from the inside, place the heavy-duty wheel onto the horizontal squared tube. 92815-801 92815-220-01 Mount both the heavy-duty wheels, first pushing them up against the cross-brace so that they are in exact alignment. Heavy-duty wheel Fixing brake 92815-218-03 92815-219-01 4 999285502-12/2010
Mounting the heavy-duty wheel on the outside Suitable for drive-through access openings > 1100 mm. Models manufactured until 2008 On stacking pallets manufactured up to and including 2007 the adapter (E) for squared tube 50 must be tilted up. 92815-203-01 92815-210-03 E b Place the heavy-duty wheel up against the middle of the horizontal steel tube. Hammer the clamping wedge () firmly into place. b... < 1100 mm 2009 models onward 92815-203-02 92815-203-03 b Where needed, you can adjust the braking force with the setting screw (width-across 24). b... < 1020 mm Raise the stacking pallet with hardwood blocking (e.g. H20 beams) by min. 'a' =100 mm. c a 92815-200-01 a... 100 mm c... 200 mm pply the fixing brake () on the heavy-duty wheel. oosen the clamping wedge (). On stacking pallets manufactured from 2008 onward Tilt the adapter (E) down. 92815-221-01 Heavy-duty wheel Fixing brake 92815-215-01 E 999285502-12/2010 5
Mounting the castor wheel Remove the linch pin (C). Working from the inside, insert the Fastening bolt 22 of the castor wheel into the hole in the cross profile. Fix in place with a linch pin (C). B C 92815-208-01 92815-209-01 B C B 92815-205-01 B Castor wheel C inch pin by oka Industrie GmbH, -3300 mstetten 6 999285502-12/2010