Innovative Polyurethanes for the Coating, Adhesives Sealants and Elastomers InDustries worldwide SAPICI RANGE 2015 RANGE 2015
INDEX bio-based FLEXIBLE PACKAGING PREPOLYMERS FOR CASTING PAGE. POLURGREEN 4 HIGH SOLID RANGE 5 hardenerers 6 WATERBORNE systems 11 1K MOISTURE CURING POLYURETHANE 12 1K OLEO-URETHANIC RESINS 13 SHORT OIL ALKYD RESINS 14 SATURATED POLYESTER RESINS 18 PREPOLYMERS 19 BLOCKED ISOCYANATES 20 ADHESIVES 21 INKS & OPV 23 SELECTOR GUIDE 24 * PLEASE CONTACT us FOR more information about SAPICI offering. * SAPICI serves its fast growing global customer base from its HQ and three R&D and production sites in Italy, as well as from its new, large and state-of-the-art manufacturing site in China. Believing in Innovation Coating, Flexible Packaging, Adhesives and Sealants, Prepolymers and Casting, Inks, and more. Since 1936, SAPICI keeps investing significant resources to constantly improve its recognized ability to satisfy and anticipate its most demanding clients requests, needs and expectations in terms of innovation. Innovation at SAPICI is a mindset, and it applies to the technical characteristics of our product lines as well as to the technologies we use and develop, to the applications we include in our studies, to the industries we supply, to the level of service we provide our clients at a global level. Would you like to discover more abour our capabilities and wide produc offering? Please visit www.sapici.it and contact us.
COATING TYPE POLURGREEN AD - 01 75 Adduct Ethyl ISOCYANATE MONOMER GARDNER TDI < 0.1 12.5-13.5 1200-3000 1 LOW MONOMER CONTENT Polyurethane adduct for general purposes. High compatibility with Nitrocellulose, CAB, saturated polyesters, acrylic and vinyl resins. Suitable for 2K varnishes and enamels. The TDI content <0.1 reduces its hazard classification. POLURGREEN AD AB - 01 67 Adduct TDI < 0.1 11.5-12.1 400-800 1 Polyurethane adduct for general purposes. High compatibility with Nitrocellulose, CAB, saturated polyesters, acrylic polyols and vinyl resins. Suitable for 2K varnishes and enamels. The TDI content <0.1 reduces its hazard classification. POLURGREEN HR - 01 50 Isocyanurate TDI < 0.1 7.7-8.1 700-1400 1 Fast drying. Limited yellowing. Suitable for PU sealers and matt topcoats. It can be used also in hot stamping field. The TDI content <0.1 reduces its hazard classification. 4 POLURGREEN 60T - 01 60 Isocyanurate TDI < 0.1 9.5-9.9 1200-2000 1 Fast drying. Limited yellowing. Suitable for PU sealers and matt topcoats. It can be used also in hot stamping field. The TDI content <0.1 reduces its hazard classification. POLURGREEN OK - 01 60 Mixed Isocyanurate TDI HDI < 0.1 < 0.1 9.8-10.3 500-1100 1 High solid content. Good flexibility. Long Pot life. Good brightness. Good compatibility with aromatic solvent and Nitrocellulose. Suitable for pigmented and clear sealers, matt and gloss topcoats. The TDI content <0.1 reduces its hazard classification POLURGREEN FP75-01 75 Adduct Ethyl TDI < 0.1 12.5-13.5 1200-3000 1 Polyurethane adduct with low free TDI content used for 2K adhesives and inks. Product in accordance with EU, BFR and FDA regulations for food packaging. The TDI content <0.1 reduces its hazard classification and gives SML free (PAA<2ppb) in short time. POLURGREEN
COATING HIGH SOLID CONTENT TYPE ISOCYANATE MONOMER GARDNER Fast drying. Good Pot life. Good yellowing. Excellent hardness. Suitable for High Solid POLURGREEN ES 65 Isocyanurate POLURGREEN XP AB 70 Isocyanurate Ethyl TDI < 0.5 11.1-11.5 250-450 1 TDI < 0.5 12.5-13.5 800-2000 1 content PU topcoats. Its high grants good crosslinking POLURGREEN ES.M 70 Mixed Isocyanurate Ethyl TDI HDI < 0.5 < 0.1 12.2-12.8 400-800 1 with higher content resins. POLURGREEN ES.P 75 Mixed Isocyanurate Ethyl TDI HDI < 0.5 < 0.1 13.5-14.5 400-800 1 OIL OIL N.A. Nr. GARDNER 5 HS 0385 AB 85 33 Vegetable fatty acids 1000-2000 15 150 4.54 3 Fast drying. Excellent adhesion on substrates. Good hardness. Good solvent release. It is used for formulations of clear sealer and matt topcoat. HS 0685 AB 85 33 Vegetable fatty acids 500-1500 10 150 4.54 3 Hexcellent hardness. Good solvent release. Long Pot Life. Suitable for matt, clear or pigmented PU topcoats. HSP 05100 100 - - Saturated polyester 24000-32000 15 210 6.36 3 Excellent hardness. High chemical. Excellent abrasion. Excellent levelling. High gloss clear and pigmented 2K PU coating. POLURGREEN- HS
COATING AROMATIC PREPOLYMERS Polyurethane adduct with low free TDI content, for general porpouses: long pot-life, high body filling, high gloss and high flexibility. High compatibility with Nitrocellulose, CAB, saturated polyesters, -acrylic polyols and vinyl resins. Reactivity Pot - life Flexibility Yellowing AD 60 T AD 72 AD AD 72 60T 6 TYPE ISOCYANATE MONOMER GARDNER AD 75 Adduct Ethyl TDI < 0.5 12.5-13.5 1200-3000 1 FP75 75 Adduct Ethyl TDI < 0.5 12.5-13.5 1200-3000 1 AD 67 67 Adduct Xilene / MPA* TDI < 0.5 10.8-11.8 1200-3000 2 AD 67 AB LV 67 Adduct TDI < 0.5 11.5-12.3 400-800 1 AD 72 70 Adduct Ethyl TDI < 0.5 9.5-10.5 2000-3000 1 60T 60 Adduct TDI < 0.5 9.5-9.9 1200-2000 1 * Metoxypropylacetate
COATING AROMATIC ISOCYANURATES Polyurethane isocyanurate with NC Compatibility Reactivity Pot-life Fullness low free TDI content: fast curing, high hardness, limited yellowing. Suitable for the formulation of high quality sealer and topcoat. IR 51 No +++ - + HR.B.S Limited +++ + ++ 7581 Ok +++ ++ +++ SB 50 AB Ok ++ +++ ++ AC 510 Ok ++ +++ ++ 3031 Limited + +++ + ISOCYANATE MONOMER IR 51 AB 50 TDI < 0.5 7.8-8.2 700-1200 1 GARDNER 7 IR 51 AE 50 Ethyl TDI < 0.3 7.8-8.2 100-400 1 HR.B.S. 50 TDI < 0.5 7.0-7.4 400-800 1 7581 50 TDI < 0.5 7.7-8.3 200-500 1 SB 50 AB 50 TDI < 0.5 8.0-8.4 200-600 1 AC 510 50 TDI < 0.7 7.0-7.4 50-300 1 3031 50 TDI < 0.5 8.5-9.0 250-650 1
COATING AROMATIC PREPOLYMERS 8 TYPE MD 50 AE 50 Prepolymer MD 60 AB 60 Prepolymer Ethyl ISOCYANATE GARDNER MDI 6.8-7.4 < 50 1 MDI 5.0-6.0 200-650 1 MD 1500 100 Polyisocyanate. MDI 31.7-33.3 < 100 18 MD 1600 100 Polyisocyanate. MDI 31.0-32.0 < 100 18 UCOPOL M 601 100 Prepolymer. MDI 22.0-24.0 < 200 18 Suitable for 1K barrier coating for wood with high oil content. It can be used on MDF to uniform adsorption and protect the substrate from humidity. Excellent flexibility. Fast drying. It improves adhesion on difficult substrates. Suitable for 1K barrier coating for wood with high oil content. It can be used on MDF to uniform adsorption and protect the substrate from humidity. Excellent flexibility. Fast drying. It improves adhesion on difficult substrates. Polyfunctional polyisocyanate based on MDI. Excellent flexibility. Fast drying. Recommended for solvent free 2K PU coating like selflevellings, sealants, adhesives and 2K primers. Polyfunctional polyisocyanate based on MDI. Excellent flexibility. Fast drying. Recommended for solvent free 2K PU coating like selflevellings, sealants, adhesives and 2K primers. Fast drying primer for concrete. Good levelling and wettability. Solventless and odourless. UCOPOL M 602 100 Prepolymer. MDI 22.0-24.0 < 200 18 Primer for concrete. Good levelling and wettability. Solventless and odourless. Longer curing time than Ucopol M 601. TYPE ISOCYANATE GARDNER KC 50 Mixed Isocyanurate TDI MDI 7.8-8.0 200-400 1 Excellent elasticity and fast drying. Excellent sandability by hand or with sanding machine. It can improve the adhesion between the layers. High hardness. Suitable for PU sealers and matt topcoats. TPI 27 AE 27 Polyisocyanate. TPTI 7.0-7.4 < 50 18 Polyisocianate expecially developed for the formulation of products with good adhesion on melamine paper. * Metoxypropylacetate
COATING ALIPHATIC-AROMATIC ISOCYANATES Aliphatic - aromatic isocyanate with low free TDI content: good flexibility and good yellowing. Suitable for polishable varnish and enamels with good color retention, for wood, metal, plastic and other substrate. Compatibility with acrylic and NC Reactivity Pot-life Fullness OK.D.S + ++ + ++ OK.D - +++ - ++ 2391 + +++ + +++ OK-HP +++ + ++ ++ 9 TYPE OK.D.S 60 Mixed Isocyanurate OK.D 60 Mixed Isocyanurate 2391 70 Mixed Isocyanurate OK-HP 60 Mixed Isocyanurate ISOCYANATE TDI HDI TDI HDI TDI IPDI TDI HDI MONOMER GARDNER < 0.5 10.0-11.0 1100-3300 1 < 0.5 10.0-10.4 500-1100 1 < 0.5 11.7-12.0 800-1400 2 < 0.5 9.3-10.3 200-500 1
COATING ALIPHATIC POLYISOCYANATES 10 T 70 70 M 75 AB 75 M 75 75 MT 75 75 TYPE Aliphatic Polyisocyanate Aliphatic Polyisocyanate Aliphatic Polyisocyanate Aliphatic Polyisocyanate MT 90 90 HDI Trymer MT 90 AB 90 HDI Trymer Xylene MPA* Xylene MPA* Solvent Naphta100 ISOCYANATE MONOMER HAZEN IPDI < 0.5 11.8-12.2 800-1600 80 HDI < 0.2 16.0-17.0 150-300 40 HDI < 0.2 16.0-17.0 150-310 60 HDI < 0.2 16.0-17.0 150-310 40 HDI < 0.2 19.1-21.5 400-700 40 HDI < 0.2 19.1-21.5 300-700 40 MT 100 100 HDI Trymer. HDI < 0.2 21.5-22.5 2000-3000 40 MT 100 LV 100 HDI Trymer. HDI < 0.2 22.0-24.0 900-1500 40 MT 100 LLV 100 HDI Trymer. HDI < 0.2 22.0-24.0 550-850 40 Used for 2K PU coating with good yellowing and outdoor.when diluted, it can be used in order to improve the performances of short and long oil drying resins. Excellent for non yellowing systems. Good flexibility. It can be used in combination with acrylic resins and saturated polyesters for 2K paints and enamels for metal, wood and plastics. Excellent for non yellowing systems. Good flexibility. It can be used in combination with acrylic resins and saturated polyesters for 2K paints and enamels for metal, wood and plastics. Excellent for non yellowing systems with improved performance. Good flexibility. It can be used in combination with acrylic resins and saturated polyesters for 2K paints and enamels for metal, wood and plastics. Excellent for non yellowing systems. Good flexibility. It is mainly used for high solid content and low viscosity 2K paints and enamels for metal, wood and plastics. Excellent for non yellowing systems. Good flexibility. It is mainly used for high solid content and low viscosity 2K paints and enamels for metal, wood and plastics. Excellent for non yellowing systems. Good flexibility. It is mainly used for high solid content and low viscosity 2K paints and enamels for metal, wood and plastics. Excellent for non yellowing systems. Good flexibility. It is mainly used for high solid content and low viscosity 2K paints and enamels for metal, wood and plastics. Excellent for non yellowing systems. Good flexibility. It is mainly used for high solid content and low viscosity 2K paints and enamels for metal, wood and plastics. * Metoxypropylacetate
coating WATERBORNE PUD HyDRO-DISPERSIBLE ISOCYANATES ISOCYANATE ph BLUEPUR 2937 36 Aliphatic Coalescent free 250 max 7.0-9.0 Resin for the formulation of 1K and 2K waterborne systems. This resin has a self crosslinking behaviour that also confers the systems high hardness. Very fast drying. It can be used to formulate transparent and pigmented coating. BLUEPUR 3037 38 Aliphatic Coalescent free 500 max 7.0-8.0 Resin for 1K and 2K waterborne systems. This resin has a self crosslinking behaviour that also confers the systems high hardness. Its high flexibility makes it suitable for the formulation of metal and plastic coating. BLUEPUR 3080 40 Aliphatic Coalescent free 500 max 7.0-8.0 Resin for 1K and 2K waterborne systems. Thanks to its special structure it can be used as a coalescent with PUD and acrylic emulsions. Its high elasticity makes it suitable for the formulation of metal and plastic coating. 11 ISOCYANATE HYDRORENE AW 1 100 Aliphatic Free 16.0-18.0 2000-4000 High dispersible isocyanate for the formulation of 2K waterborne varnishes with good chemical and abrasion. Recommended for mat topcoat. HYDRORENE AW 30 100 Aliphatic Free 15.5-16.5 6000-9000 High dispersible isocyanate for the formulation of 2K waterborne varnishes with excellent chemical and abrasion. Suitable for acrylic and PU waterborne systems. Recommended in high gloss topcoats. HYDRORENE 33 100 Aliphatic Free 15.8-16.6 5000-8000 2K waterborne varnishes with excellent chemical and abrasion. Suitable for acrylic and PU waterborne systems. Recommended in high gloss topcoats. BLUEPUR-HYDRORENE
COATING MOISTURE CURING POLYURETHANES Moisture curing prepolymer POLURGREEN M 570 70 ISOCYANATE MONOMER GARDNER MAIN CHARACTERISTIC TDI < 0.5 6.5-7.5 400-800 1 High solid suitable for the formulation UCOPOL M 505 53 Ethyl TDI < 0.5 4.4-5.2 < 50 1 Ready to use of 1K coating with excellent UCOPOL M 33 60 MPA 60 MPA* TDI < 0.5 5.5-6.5 250-500 1 Fast curing surface hardnes, abrasion UCOPOL M 34 60 MPAX LV 60 Xylene MPA* TDI < 0.3 6.8-7.8 800-1600 1 Abrasion and brightness. UCOPOL M 4054 60 Xylene MPA* TDI < 0.5 6.3-6.8 250-750 2 Hardness 12 UCOPOL M 2851 60 Xylene MPA* TDI < 0.5 5.0-6.0 600-1200 1 Adhesion UCOPOL W 708 65 Xylene MPA* HDI < 0.5 10.0-11.0 300-700 2 Yellowing TYPE ISOCYANATE AMINE VALUE GARDNER UCOFLEX EW 810/30 A 30 Elastomer Isobutanol IPDI 1 1000-2000 6 Clear and pigmented paints for paper, ABS, PVC, PUR and PS. Good yellowing, abrasion and shock. * Metoxypropylacetate UCOPOL-UCOFLEX
coating OLEO-URETHANIC RESINS Short oil alkyd resin based on castor oil: good elasticity, low viscosity, good Drying Abrasion Yellowing Hardness Adhesion on metal UCOPOL OL 17 60 OD ++ +++ ++ +++ No solvent release and fast drying. High wetting properties. Indicated for clear and pigmented PU coating. UCOPOL OL 18 50 X +++ +++ + +++ No UCOPOL OL 89 55 OD + + ++ + Ok UCOPOL OL 51 60 OD + + ++ ++ Limited UCOPOL OL W 41 55 OD ++ ++ +++ ++ Ok ISOCYANATE OIL ACID NUMBER GARDNER 13 UCOPOL OL 17 60 OD 60 De-aromatized White Spirit Aromatic Drying 3000-7000 1 6 UCOPOL OL 18 50 X 50 Xylene Aromatic Drying 4000-7000 0.3 6 UCOPOL OL 89 55 OD 55 De-aromatized White Spirit Aromatic Special fatty acids 800-1600 3 6 UCOPOL OL 51 60 OD 60 De-aromatized Aromatic Special fatty acids 4000-7000 4 6 UCOPOL OL W 41 55 OD 55 De-aromatized White Spirit Aliphatic Special fatty acids 4000-7000 4 6 UCOPOL OL
coating SHORT OIL ALKYD RESINS Short oil alkyd resin based on vegetable fatty acid: fast drying, excellent solvent release. In combination with flexible resins it can improve sandability of sealers. Used alone it can improve surface hardeness and levelling of matt top coats. Sandability Matting efficency Fullness Flexibility Main charateristic HS 129 +++ ++ ++ - fast curing 5528 ++ + ++ + levelling 590 ++ + +++ ++ low odour 1561 +++ ++ + +++ wettability C 760 ++ ++ ++ ++ all porpouse 14 OIL ACID NUMBER N GARDNER HS 129 60 Xylene 32 10000-22000 16 60 1.82 5 5528 70 Xylene 35 45000-65000* 15 80 2.42 3 590 60 Xylene 28 2000-3500 10 85 2.57 4 1561 60 Xylene 39 4500-8500 9 80 2.42 5 C 760 60 Xylene 35 4000-8000 7 80 2.42 5
coating SHORT OIL ALKYD RESINS OIL 2268 80 Xylene 27 CM 65 65 Xylene 29 2039 50 Xylene MEK 31 OIL Vegetable fatty acids Vegetable fatty acids Vegetable fatty acids ACID NUMBER NUMBER GARDNER 4000-7000 8 120 3.63 1 3000-6000 15 110 3.33 1 7000-13000 20 80 2.42 3 Excellent gloss. Excellent hardness. Excellent yellowing. For clear and pigmented PUcoating. Stoving enamels with high flexibility and hardness. Perfect compatibility with acrylic resins Good hardness and flexibility. Excellent colour retention. Good drying. Fast solvent release. Overspray. For clear and pigmented PU coating for indoor and outdoor use. Fast drying. Excellent surface hardness, good filling. It is recommended for high quality matt and high gloss sealers and topcoats. It can be used in combination with urea and melamine resins for stoving enamels. 141 60 Xylene 41 Vegetable fatty acids 3000-5000 14 90 2.73 3 Resin for matt topcoat with good balance between hardness, flexibility and pot-life. 15 CD 80 BX 80 Xylene 36 Vegetable fatty acids 4000-7000 8 120 3.63 3 Good elasticity. Low viscosity. Excellent adhesion. Excellent pigment wettability. For clear and pigmented PU sealers and top coats. For its thermal stability can be used in formulation of primer for powder coating. OIL 2281/70 X 70 Xylene 40 OIL Vegetable fatty acids ACID NUMBER NUMBER GARDNER 800-1400 12 85 2.57 3 Binder for universal pigmented paste. Compatible with short-medium-long oil alkyd resins, saturated polyesters, acrylic, epoxy, urea and melamine resins, chetonic and maleic resins. 5250 70 Xylene 40 Vegetable fatty acids 3000-5000 14 80 2.42 3 Special resin, with good color retention, hardness and gloss. developed for the formulation of converter for tintometric system.
coating SHORT OIL ALKYD RESINS Short oil alkyd resin based on saturated fatty acid: excellent gloss, excellent hardness and excellent yellowing. For clear and pigmented PU coatings. Stoving enamels with high flexibility and hardness. High solid coatings. Polishability Fullness Chemical Main charateristic AP 575 +++ ++ ++ Fast curing AP 572 ++ ++ ++ Low viscosity HG 70 +++ + ++ General porpouse HG 7 ++ +++ ++ Wood coating 1523 +++ +++ +++ High performance SX 300 ++ +++ +++ Color retention 16 OIL ACID NUMBER NUMBER GARDNER AP 575 80 Xylene 32 35000-45000 20 120 3.63 1 AP 572 80 Xylene 27 4000-9000 12 110 3.33 1 HG 70 70 Xylene 27 1300-3000 15 90 2.73 3 HG 7 80 Xylene 34 40000-50000 12 120 3.64 1 1523 70 33 3000-6000 10 130 3.93 3 SX 300 70 35 3000-5000 15 125 3.78 3
coating SHORT OIL ALKYD RESINS Short oil alkyd resin based on castor Wettability Color retention Chemical - physical oil: good elasticity, low viscosity, good solvent release and fast drying. High wetting properties. Indicated for clear and pigmented PU coating. LS 124 +++ + ++ 160 ++ ++ ++ 143 ++ ++ ++ 1543/75 AB ++ + ++ 700 ++ ++ +++ OIL OIL ACID NUMBER NUMBER GARDNER LS 124 70 Xylene 60 Castor oil 800-1600 10 120 3.63 3 17 160 60 Xylene 57 Castor oil 1500-2500 9 85 2.57 3 143 60 Xylene 46 Castor oil 1500-3500 15 90 2.72 3 1543/75 AB 75 52 Castor oil 4000-8000 12 130 3.90 3 700 70 28 Castor oil 2500-4500 15 90 2.72 3
coating SATURATED POLYESTERS 18 DP 127 70 DP 328 70 DP 315 75 DP 408/80 AB 80 ACID NUMBER NUMBER GARDNER 1800-3500 13 135 4.09 2 3000-5000 13 110 3.33 3 17000-25000 13 90 2.73 3 1000-1800 4 240 7.27 3 DP 411 100. 20000-40000 4 180 5.61 2 Excellent hardness. Good abrasion. Excellent yellowing. Excellent wetting properties. High gloss and fast drying clear and pigmented 2K PU coating. It is recommended for pigmented paste. Good hardeness and flexibility. Good abrasion. Good filling and solvent release. Good compatibility with Nitrocellulose. It can be used in combination with urea and melamine resins. Clear and pigmented 2K PU coating. Saturated polyester resin for pigmented high gloss topcoat. Fast drying, good levelling, excellent hardness and fullness make it suitable for black high gloss. Highly branched polyester resin. High chemical. Excellent hardness and abrasion. It is recommended for 2K PU parquet coating and enamels for metal. Slightly branched solventless polyester resin. Good chemical. Good hardness and excellent flexibility. It is recommended for 2K PU parquet coating. DP 412 100. 3500-6500 4 185 5.61 2 DP 417 100. 10000-20000 5 40 1.20 2 DP500 70 Solvent Naphta 100 4000-9000 6 50 1.52 3 Slightly branched solventless polyester resin.high chemical. Excellent elasticity. For coating and enamels for metal, wood, plastic and rubber. Solventless polyester resin. Excellent elasticity. Suitable for coating and enamels for paper, leather, plastic and rubber. It is used for the formulation of soft touch effect coating. Saturated polyester resin to use in combination with melaminic resin to improve flexibility, adhesion and chip in stoving enamel. DP
prepolymers TYPE MONOMER 5500 Polyether - TDI 5000-7000 @ 23 C < 0.5 2.2 Branched prepolymer with hiigh modulus and elongation. 450 Polyether - TDI 5000-9000 @ 23 C < 0.5 4.5 Linear prepolymer with high elongation and tensile strength. 620 Polyether - TDI 15000-25000 @ 23 C < 0.5 6.2 Linear prepolymer with high elongation and tensile strength. 750 Polyether - TDI 8000-12000 @ 40 C < 0.5 7.5 Linear prepolymer with high elongation and tensile strength. XP 3617 Polyether - TDI 4500-6500 @ 40 C < 1 10.5 TDI based prepolymer especially designed for R40 free product. 19 XP 4041 Polyether - HDI 2000-4000 @ 23 C < 0.5 9.5 Aliphatic prepolymer for applications where maximum yellowing is needed. 604 Polyether - MDI 4000-8000 @ 23 C. 9.0-10.0 Branched prepolymer to reach elevated crosslinking density. 610 Polyether - MDI 600-1400 @ 23 C. 14.0-14.7 Linear prepolymer with high elongation and tensile strength.
BLOCKED ISOCYANATES 20 Free Blocked GARDNER Polurene MBD 2 75 0.2 10.2 2500-5000 1 LP 100 LV 100 0.2 2.7 25000-45000 1 LP 90 LV 90 0.2 2.4 10000-25000 1 LP 80 LV 80 0.2 2.2 7000-12000 1 LP 100 NPF 100 0.2 2.8 25000-45000 LP 90 NPF 90 0.2 2.5 10000-20000 BK 50 AE 50 0.1 6.2 < 100 2.. Aliphatic blockedisocyanate suitable for the formulation of non yellowing 1K stoving enamels for coil coating; it can be used in traditional stoving enamels to flexibilize and increase adhesion. PU prepolymer TDI based containing blocked isocyanic groups. Lower viscosity than LP 100. Excellent for improving the flexibility of epoxy systems. Excellent rheology. TDI based branched polymer in DOA at 90 containing blocked and curable isocyanic groups. Very low viscosity. Excellent for improving the flexibility of epoxy systems for adhesives, sealant and membrane. Excellent rheology. TDI based branched polymer in DOA at 80 containing blocked and curable isocyanic groups. Very low viscosity. Excellent for improving the flexibility of epoxy systems for adhesives, sealants and membranes. Excellent rheology. PU prepolymer TDI based containing blocked isocyanic groups. Excellent for improving the flexibility of epoxy systems. Excellent rheology. It does not release Nonyl Phenole, thus reducing its hazard classification. TDI based branched polymer in DOA at 90 containing blocked isocyanic groups. Excellent for improving the flexibility of epoxy systems. Excellent rheology. It does not release Nonyl Phenole, thus reducing its hazard classification. TDI based polymer containing blocked and curable isocyanic groups. Recommended for non-woven, PVC, fabrics and fabric laminations. LP
adhesives industrial applications GARDNER IAX 3719 67 1.6-2.2 6000-10000 2 MDI based 1K PU adhesive in ethyl acetate. Excellent initial bond, recommended for PVC, expanded PU and natural and synthetic fabrics. LPI 2572 100 12.5-14.5 3000-7000 18 LPI 34 NT 100 14.0-16.0 2000-4000 18 LPI 103 100 8.0-10.0 200-400 (*). Solvent free MDI based 1K PU adhesive. It is recommended for sandwich panels for thermic and acoustic insulation. Ready to use 1K adhesive for wood, D4 approved, recommended for finger joint bonding of outdoor furnitures. Highly resistant to acid and alkaline hydrolysis. Short Pot life. Very crystalline adhesive resistant to heat-shock. MDI based, 1K adhesive. Excellent initial bond, recommended for PVC, expanded PU and natural and synthetic fabrics. (*) 75 in ethyl acetate. 21 1973/537 37-1000-1600 4 1K polyesther adhesive. Excellent initial bond, recommended for metal, plastic (also PP e PE), wood, natural and synthetic fabrics. It can be used in 2K system to maximize final properties. LPI
adhesives footwear APPEARANCE GARDNER UNI-DUR WB 7000 Clear 2000-4000 100 16.9-17.1 2 for high-quality water based polyurethane systems. It can improve the of adhesive bonds towards moisture, heat and solvents. Thanks to its hydrophilic character, it is easily dispersible by mechanical stirrer. GARDNER 22 UNI-DUR TD 35 < 50 35 Ethyl 5.7-6.3 1 UNI-DUR E 1001 RN. 40 Ethyl 7.0-7.6 1 UNI-DUR E 2002 ARFE < 50 27 Ethyl 6.8-7.2 18 Recommended to improve the adhesion, cohesion and heat of the final bond. Recommended to improve the adhesion, cohesion and heat of the final bond. It yields bonds that undergo to minimal colour modification. Recommended for crosslinking industrial polyurethane adhesives for natural or synthetic rubber. It significantly improves the adhesion, cohesion and heat of the final bond. UNI-DUR
inks Ucopol M 33/65 K 65 Ethyl 400-800 5.9 Moisture curing polyurethane for 1K overprint varnish. Polurene FP 75 75 Ethyl 1200-3000 13.0 Polurgreen FP 75-01 75 Ethyl 1200-3000 13.0 Aromatic polyurethane adduct, to be used as hardener and/or adhesion promoter. Low free monomer version of FP 75.: safer labelling and reduced byside production of aromatic amines. Polurene IR 51 K 50 Ethyl 100-400 8.0 Aromatic polyurethane isocyanurate, faster in curing than Polurene FP 75. Polurene OK K 60 Ethyl 100-400 10.2 NUMBER Rexin K 6302 70 Ethyl 100-500 100 Rexin K 1939 75 Ethyl 3000-4000 165 Rexin K 6258 60 Ethyl <100 180 Aliphatic-aromatic polyurethane isocyanurate, to be used when better yellowing are required. Polyester resin mainly recommended for the formulation of 2k inks and/or overprint varnishes. Polyester resin mainly recommended for the formulation of 2k inks and/or overprint varnishes. Polyester resin mainly recommended for the formulation of 2k inks and/or overprint varnishes. 23 1973/537 37 Ethyl 1000-1600 - High molecular weight polyester for inks and laquers.
WOOD COATING BINDER HS 129 160 HG 70 590 DP 127 DP 408 BLUEPUR 2937 BLUEPUR 3037 UCOPOL M 4054 UCOPOL OL 4155 PRIMER Reduced tannin Exotic wood Impregnating SEALER Sandability Wetting Super Wetting Parquet Flooring Sandability Flexibility 1K Parquet flooring TOPCOAT MATT Fast drying Flexibility Transparency Chemical Flexibility 1K Parquet flooring 1K yellowing TOPCOAT HIGH GLOSS Polishability Chemical Chemical Flexibility 1K Parquet flooring 1K yellowing 24 HARDENER AD IR 51 AB PRIMER Wettability Fast drying OK.D OK-HP KC Wettability Exotic Wood AC 510 TPI 27 AE Primer Melaminic Paper MT 100 HYDRORENE AW 1 Improve HYDRORENE AW 30 Improve SEALER Flexibility Sandability Compatibility with acrylic Intercoat adhesion Improve Improve TOPCOAT MATT Flexibility Matting Yellowing Compatibility with acrylic No yellowing Improve TOPCOAT HIGH GLOSS Gloss Yellowing Compatibility with acrylic Fast curing No yellowing Improve
METAL COATING BINDER LS 124 2268 DP 127 CM 65 UCOPOL M 2851 UCOPOL OL 8955 UCOPOL OL W 4155 PRIMER Adhesion Wash primer Do it yourself Do it yourself BLUEPUR 3037 Adhesion and Flexibility BASECOAT Sandability Compatibility with Metallic pigment Do it yourself Do it yourself Adhesion and FINISH Compatibility with acrylic Chemical Do it yourself HARDENER AD 67 OK-HP XP AB M 75 MT 100 MBD 2 HYDRORENE AW30 PRIMER Adhesion Fast drying 1K for Coil Coating BASECOAT FINISH Flexibility Compatibility with acrylic Compatibility with acrylic Flexibility Yellowing Yellowing 1K for Coil Coating Improve Improve 25 DP 127 M 75 MT 100 INDUSTRIAL FLOORING LP 100 NPF MD 1600 UCOPOL M 602 UCOPOL M 551 UCOPOL W 708 604 BLUEPUR 3037 HYDRORENE AW 1 PRIMER 1K ready SELF LEVELLING Reactive TOPCOAT Chemical Physical Yellowing Yellowing 1K no yellowing No VOC Chemical - Physical SPECIAL Bitumen membrane Rubber playground
plastic COATING UCOFLEX EW 810 TPI 27AE UCOPOL M 34/60 DP 127 DP 412 DP 417 AD MT 90 BA MT 100 BLUEPUR 3037 BLUEPUR 3080 HYDRORENE AW 1 HYDRORENE AW 30 ABS 1K Primer 1K or 2K Primer 1K Primer High performance topcoat 2K Direct to plastic 2K Soft Touch Low viscosity 2K Direct to plastic 2K Soft Touch Matt High gloss PA 1K Primer 1K Primer High performance topcoat 2K Direct to plastic 2K Soft Touch Low viscosity 2K Soft Touch Matt High gloss 28 PC 1K Primer 1K Primer High performance topcoat 2K Direct to plastic 2K Soft Touch Low viscosity 2K Direct to plastic 2K Soft Touch Matt High gloss PVC 1K Primer 1K or 2K Primer High performance topcoat 2K Direct to plastic 2K Soft Touch Low viscosity 2K Soft Touch Matt High gloss PS 1K Primer 1K Primer High performance topcoat 2K Direct to plastic 2K Soft Touch Low viscosity 2K Direct to plastic 2K Soft Touch Matt High gloss
SAPICI S.p.A. web www.sapici.it e-mail info@sapici.it Technical Information e-mail tech@sapici.it phone +39 02 92 1871 Commercial Information e-mail sales@sapici.it phone +39 02 9644621 Editorial Information e-mail media@sapici.it Please note. All product specifications indicated in this catalogue refer to their delivery form. Technical information provided in this document or given in either oral or written form is always based on our best knowledge and experience. Such data, even technical and safety ones, are intended to be considered as indicative and do not have to be taken as binding. Customers must test the products to define whether they are suitable for the intended use and application. The use, manufacture and application conditions of our products are carried out beyond our control so they are under the customer s responsibility. CAT.ENG.01.2015