Waterproof Paper Sheets Flexible latex impregnated, anti-slip paper backing with a fully resin-bonded grit. The paper can be used wet or dry as a durable abrasive for hand finishing. Supplied in full sheets down to very fine grits for preparation and finishing. Typically used on painted or lacquered surfaces, fibreglass and metal to produce a high quality finish. Ideal for automotive, metal working and plastics industries. Art. No. Sheet Size (mm) Grit Pack Size Outer 1112 008 00 230 x 280 80 2 1112 012 00 230 x 280 120 2 1112 018 00 230 x 280 180 2 1112 022 00 230 x 280 220 2 1112 024 00 230 x 280 240 2 1112 032 00 230 x 280 320 2 1112 040 00 230 x 280 400 2 1112 060 00 230 x 280 600 2 1112 080 00 230 x 280 800 2 Hermes Cloth Sanding Belts A range of Hermes sanding belts to suit the most popular industrial belt sanders. Available in a range of grits. Aluminium Oxide belts combined to ensure long life and great strength. Size x 1525 & 100 x 915 Aluminium Oxide belts have a thicker and stiffer backing to suit larger linishing machines. Ideal for sanding steel, ferrous metals and wood. Packs of 10. 40 Grit Med 100 Grit Fine 240 Grit Very Fine 05 01 - JDS 04/13 Reproduction, even in part, prohibited. Printed in UK. Art. No. Belt Size Grit (mm) 0673 753 40 75 x 533 40 0673 753 60 75 x 533 60 0673 753 80 75 x 533 80 0673 156 80 100 x 560 80 0673 156 100 100 x 560 100 Art. No. Belt Size Grit (mm) 0673 161 40 100 x 610 40 0673 161 60 100 x 610 60 0673 161 80 100 x 610 80 0673 161 100 100 x 610 100 0673 161 120 100 x 610 120 Art. No. Belt Size Grit (mm) 0673 161 1 100 x 610 1 0673 515 240 x 1525 240 0673 191 60 100 x 915 60 0673 191 80 100 x 915 80 0673 191 120 100 x 915 120 05 01 05 01
Hermes Sanding Belts Abrasive belts that are available from the supplier POA. Remember, however, these would be specials and Minimum Order Quantities will apply to the size and grit. In order to obtain price and availability we need: Size of the belt, type of material, grit & quantity. Aluminium Oxide Portable Belts HSB Size: (W x L mm) 60 x 400 65 x 410 75 x 457, 480, 510 & 610 100 x 620, 860, 900 & 9 105 x 620, 110 x 620 Aluminium Oxide Narrow Cloth Belts 377yx Size: (W x L mm) 25 x 1065 x 1525 100 x 30 1 x1090, 1220 & 20 Aluminium Oxide Hand Tool Belts 377yx Size: (W x L mm) 10 x 330 12 x 457 & 610 13 x 454 30 x 740 Zirconium and ceramic belts also available POA. 05 02 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK. Non Woven Rolls An abrasive hand pad on a roll. A non-woven abrasive material supplied in rolls allowing you to cut to the desired length and avoid wastage. Extremely flexible and handy to use. Recommended for cleaning parts of an irregular shape and for removing dirt, scale, paint and other contaminants left by previous operations. Often used for cleaning, finishing and light de-burring of steel, non-ferrous metals and stainless steel. Size: 115mm x 10m Art. No. Grit Grade 0672 015 008 120 Med 0672 015 012 180 Fine 0672 015 028 320 Very Fine 05 02 05 02
Aluminium Oxide Paper Roll Profix Aluminium Paper Rolls are an economical & handy way of buying abrasive paper for hand or portable power tool use. Available in two widths to suit 1/3 (third) or 1/2 (half) sanders. Grit range from 40 grit coarse to 240 grit fine. Suitable for heavy duty sanding of wood, plastics & fillers by hand or orbital sander. Art. No. Width (mm) Grit (mm) 1107 104 00 100 40 1107 106 00 100 60 1107 108 00 100 80 1107 110 00 100 100 1107 112 00 100 120 1107 118 00 100 180 1107 124 00 100 240 Profix Utility Rolls Length (mtr) Art. No. Width (mm) Grit (mm) 1107 204 00 115 40 1107 206 00 115 60 1107 208 00 115 80 1107 210 00 115 100 1107 212 00 115 120 1107 215 00 115 1 1107 218 00 115 180 1107 224 00 115 240 Commonly called emery cloth. Profix utility cloth rolls are for use in various metalwork applications. metre long rolls in three widths 25mm, 38mm & mm. Product range from 60 grit coarse up to 240 grit fine. J weight flexible backing for finishing and blending of profiled parts. Aluminium oxide grit that resists dulling on steel and alloys. Length (mtr) 05 03 - JDS 04/13 Reproduction, even in part, prohibited. Printed in UK. Art. No. Grit Width (mm) Length (mtr) 1106 006 00 60 1106 008 00 80 1106 010 00 100 1106 012 00 120 1106 015 00 1 1106 024 00 240 25 Silicone Carbide Paper Rolls Abrasive paper for hand and portable power tool use. Silicone carbide is a sharp abrasive so is ideal for finer finishing applications, prevents clogging. The paper is much more flexible and designed for contouring the component and getting into those hard to reach areas. Ideal for finishing wood, paint, lacquer and plastic. Art. No. Width Grit (mm) 1108 015 00 115 1 1108 018 00 115 180 1108 024 00 115 240 1108 040 00 115 400 Art. No. Grit Width (mm) Length (mtr) 1106 106 00 60 1106 108 00 80 38 1106 110 00 100 1106 206 00 60 1106 208 00 80 1106 212 00 120 1106 224 00 240 Length (mtr) 05 05 03 05 03
Hermes Discs - Self Stick & Velcro H cab, Long life, CD weight, aluminium oxide paper with a special coating, resin bonded. High quality aluminium oxide grain. D or C weight paper. Special Prolub coating to prevent clogging. Grit range: 40 grit coarse to 400 grit fine. 6 (1mm) diameter. Applications: For the general orbital sanding of wood, metal, paint etc. Also commonly used for grinding, shaping and polishing plastics and acrylic parts. For use on fillers, original primers, old coats of paints and polyester fillers. For the surface sanding and shaping of stone-throw marks and rust spots. For the sanding of paint transitions on polished parts prior to filling. Light deburring of metal components. Velcro discs have 8 holes. Art. No. Dia. (mm) Grit Type 0697 1 040 1 40 Self Stick 0697 1 060 1 60 Self Stick 0697 1 080 1 80 Self Stick 0697 1 120 1 120 Self Stick 0697 1 180 1 180 Self Stick Aluminium Oxide Velcro Discs with a special coating. High quality aluminium oxide grain. D paper weight. Fully resin bonded. A choice of no holes or 6 holed configuration. Suitable for most machine types. Grit range 40-100. Art. No. Dia. (mm) Grit Type 0697 1 400 1 400 Self Stick 0697 215 080 1 80 Velcro 0697 215 120 1 120 Velcro 0697 215 400 1 400 Velcro 05 04 - JDS 04/13 Reproduction, even in part, prohibited. Printed in UK. Self Adhesive Silicon Carbide Discs A highly flexible Silicon Carbide paper. Extremely adaptable. Resistant resin bond. Ideal for finishing & denibbing wood, paint, lacquer and UPVC. No holes. Suitable for most machine types. Grit range 120 400. Art. No. Dia. Grit Type Holes 1109 100 040 1 40 Velcro 0 1109 100 060 1 60 Velcro 0 1109 100 080 1 80 Velcro 0 1109 100 100 1 100 Velcro 0 1109 110 040 1 40 Velcro 6 1109 110 060 1 60 Velcro 6 Art. No. Dia Grit Type Holes 1109 110 080 1 80 Velcro 6 1109 110 100 1 100 Velcro 6 1109 200 120 1 120 Self Stick 0 1109 200 180 1 180 Self Stick 0 1109 200 320 1 320 Self Stick 0 1109 200 400 1 400 Self Stick 0 05 04 05 04
RECA Aluminium Oxide Fibre Discs For use in conjunction with a backing pad on a mini or angle grinder. High quality aluminium oxide grain with a full resin bond for all heavy duty and stainless steel work. Industrial quality for excellent performance. Five diameters to fit most popular portable grinders. Grit range covers from 16 grit coarse to 120 grit fine. Many applications including surfacing and de-burring of all metals, levelling of steel edges. Benefits include long life, high stock removal and iron content. Art. No. Dia. (mm) Bore (mm) Grit 0665 100 24 100 16 24 0665 100 36 100 16 36 0665 100 60 100 16 60 0665 100 120 100 16 120 0665 115 24 115 22 24 0665 115 36 115 22 36 0665 115 40 115 22 40 0665 115 115 22 0665 115 60 115 22 60 Backing Pads Art. No. Dia. (mm) Thread Bore (mm) 0665 100 100 M10 16 0665 115 115 M14 22 0665 125 125 M14 22 0665 178 178 M14 22 Art. No. Dia. (mm) Bore (mm) Grit 0665 115 80 115 22 80 0665 115 120 115 22 120 0665 125 36 125 22 36 0665 125 60 125 22 60 0665 178 16 178 22 16 0665 178 24 178 22 24 0665 178 36 178 22 36 0665 178 178 22 Full range of industrial quality backing pads to suit most popular angle and mini grinders. Designed to operate at the usual high working speeds. 05 05 - JDS 04/13 Reproduction, even in part, prohibited. Printed in UK. 05 05 05 05
RECA Zirconium Fibre Discs RECA Zirconium Fibre Discs have fine crystalline grain consisting of aluminium and zirconium oxide. Compared to aluminium oxide, zirconium discs have a high tenacity combined with slightly less hardness. Fields of application include rough sanding of metal and use on welds, steels, stainless steel, fibre grass and heavy-duty metals. Cool cutting, long lifetime and continuous self-sharpening. Even low grinding pressures produce an aggressive cutting performance. Gives long life when performing heavy duty grinding on steel, carbon steel, stainless steel or titanium. Grits from coarse 24 grit to medium 120 grit. High strength vulcanized fibre to resist tearing in heavy grinding applications. Offers excellent cost effectiveness for fabricators, sheet metal workers, forgers, steel case manufacturers and throughout the metal industry. Art. No. Dia. (mm) Bore (mm) Grit 0665 110 3 100 16 36 0665 110 6 100 16 60 0665 110 8 100 16 80 0665 110 512 100 16 120 0665 111 2 115 22 24 0665 111 3 115 22 36 0665 111 6 115 22 60 0665 111 8 115 22 80 0665 111 512 115 22 120 Ceramic Fibre Discs Art. No. Dia. (mm) Bore (mm) Grit 0665 112 3 125 22 36 0665 112 6 125 22 60 0665 112 8 125 22 80 0665 112 512 125 22 120 0665 118 3 180 22 36 0665 118 6 180 22 60 0665 118 8 180 22 80 0665 118 512 180 22 120 05 06 - JDS 05/13 Reproduction, even in part, prohibited. Printed in UK. Ceramic technology has been used to build upon the existing range of fibre discs and to give customers premium performance and lifetime. Fibre discs with precision shaped ceramic grain, engineered with ultra fast sharp cutting points, even wear, optimising mineral breakdown to maximise disc life. Ceramic grain sharpens as it wears, initial grinding breaks away a small edge of the grain, as grinding continues micro fractures form which break off to create fresh sharp edges. This process repeats throughout grinding to give long term efficiency. Particularly aggressive stock removal and improved grain retention. Particularly suitable for stainless steel, chrome, titanium and other more exotic materials, and of course mild steel. Ceramic gives you increased productivity and lower cost per grind, and of course less down time. 1 ceramic disc = 10 Aluminium oxide discs OR 3-4 Zirconium discs in lifetime approximately. Art. No. Dia. (mm) Bore (mm) Grit 0665 511 3 115 22 36 0665 511 6 115 22 60 05 06 05 06
05 07 - JDS 04/15 Reproduction, even in part, prohibited. Printed in UK. Discs with Fastlock System For use with compressed air grinders (right angled) and flexible shafts. Can be used on most metals; steel, stainless steel and non ferrous metals. Ideal for use when grinding weld points, and in areas that are hard to reach. Fastlock system allows discs to be changed quickly and easily, it is also compatible with Roloc (3M), Siafix (Sia) and Type III Twist (Merit). Discs must be used in conjunction with a backing pad and spindle. Ceramic Disc Ceramic grain gives you a more aggressive and higher stock removal rate. The coating on the discs keeps them cool when grinding, allowing for a longer working time than standard zirconium. Backing cloth is a tear resistant z-polyester. mm Art No 0668 0 36 0668 0 60 75mm Art. No. Grit Box Qty 0668 075 036 36 0668 075 060 60 Aluminium Oxide Disc Aluminium oxide grain. Constant surface quality, especially in finer grits. 75mm disc only, link with backing pad to enable finishing in tight corners or on pipework. Disc size 75mm. Art. No. Grit Box Qty 0668 075 120 120 Webrax Discs Aluminium oxide web reinforced with cloth. Resists clogging and low level of heat generated. Finer grits for finishing off material or finishing off weld joints. mm Art No 0668 051 80 0668 051 100 MultiClean Discs 75mm Art. No. Grit Box Qty 0668 076 80 80 0668 076 100 100 Silicone carbide grain. Ideal for cleaning and scouring of surfaces, removal of discolouration and rust layers. Also ideal for removing grinding marks, scratches, coatings and old paint. Disc size mm - Art. No. 0668 052 00 Disc size 75mm - Art. No. 0668 077 00 Backing pad for mm Discs Art. No 0668 Backing pad for 75mm Discs Art. No 0668 070 Spindle for Backing pad 6mm shank Art. No. 0668 6 M14 Adaptor for use with backing pad Art. No. 0668 14 05 07 05 07
Grinding Mops Hermes Flap Discs A Zirconium grinding mop with elastic properties. This flap disc has a bevelled edge and a glass fibre backing pad, it is suitable for a wide range of grinding applications. Zirconium mops give increased surface removal and extended grinding life. Flaps will not leave the pad until the last millimetre has been used. Ideal for surface grinding, de-rusting, de-burring or polishing. Can be used on steel, stainless steel, iron, non-ferrous metals and aluminium. Sold in packs of 10. Art. No. Dia. (mm) Bore Size (mm) Grit 1159 111 540 115 22.2 40 1159 111 560 115 22.2 60 1159 111 580 115 22.2 80 RECA Grinding Mops 05 08 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK. RECA Depressed Centre Grinding Mops Depressed centre with a blade angle of 15-20 degrees. Evenly deposited zirconium emery layer. Because of the flexible back, can be worn down completely. Recommended by DSA. The arched design allows surface grinding. Larger projection of the abrasive flap allows grinding, even in difficult to reach places. Long-life & low noise level. If safety recommendations are followed, this product enables danger-free use without the use of backing pads. Can be used in many situations: rough-grinding, intermediate grinding, seam welding, deburring, derusting, cleaning of welding, cleaning of large castings, internal grinding of containers. Art. No. Dia. (mm) Bore Size (mm) Grit 0666 011 536 115 22 36 0666 011 540 115 22 40 0666 011 560 115 22 60 0666 011 580 115 22 80 Art. No. Dia. (mm) Bore Size (mm) Grit 0666 012 536 125 22 36 0666 012 560 125 22 60 0666 017 840 178 22 40 0666 017 860 178 22 60 05 08 05 08
RECA Grinding Mops RECA Clean Mop A nylon grinding mop with a flexible plastic backing plate for cleaning all metals. Used to clean metal (sandblast effect), cleans rust, corrosive wear, rust flake, dirt, colours and coating, cleans welds, delustre the surface and to polish wood. Art. No. Dia. (mm) Bore Size (mm) Ideal Operating Speed Max Speed Grit 0666 912 546 125 22.2 2000-40rpm 00rpm 45 Magnum Fleece Poli Mop A micro fibre mop with a flexible plastic backing plate for polishing metal including stainless steel. Used to clean residue, scratches, rust, ridges, paint and coverings, micro fine cleaning of every metal, cleans welds, to clean and polish wood and plastics. 05 09 - VY 07/16 Reproduction, even in part, prohibited. Printed in UK. Art. No. Dia. (mm) Bore Size (mm) Ideal Operating Speed Grit 0666 811 080 115 22.2 2.000-5.000 80 0666 811 180 115 22.2 2.000-5.000 180 0666 811 400 115 22.2 2.000-5.000 400 0666 811 600 115 22.2 2.000-5.000 600 RECA Ela Mop A plastic backed semi-flexible grinding disc with an elasticated bonding agent. For ultimate grinding performance with a better wave free finish, smaller grooves and a more level surface. Suitable for a wide range of grinding applications. More grinding corns increase stock or surface removal. Extended cutting edge life. Gives soft and cool grinding. Resilient elastic features gives lower operator vibration. Flaps will not leave the plate until the last millimetre is used. Ideal for surface grinding, de-rusting, de-burring & polishing. Used on iron, steel, stainless steel, cast, non-ferrous metals and aluminium. Art. No. Dia. (mm) Bore Size (mm) Grit 0666 111 540 115 22.2 40 0666 111 560 115 22.2 60 0666 111 580 115 22.2 80 0666 111 512 115 22.2 120 0666 112 540 125 22.2 40 0666 112 560 125 22.2 60 0666 112 580 125 22.2 80 0666 112 512 125 22.2 120 05 09 05 09
RECA Grinding Mops RECA F/S Mop RECA s best performing flap disc, with an offset plastic backing pad. Can be used on steel, cast iron and stainless steel. Self sharpening highest quality zirconia grain, always new grain available to be used. Thicker zirconia flaps than the standard RECA Ela mop, with a higher concentration of grain. In tests the F/s mop removed up to 30% more material than the Ela mop. The offset backing pad also helps the user when looking to grind edges. Art. No. Dia. (mm) Bore Size (mm) Grit Pack Qty 0666 515 040 115 22.2 40 10 0666 515 060 115 22.2 60 10 05 10 - VY 12/15 Reproduction, even in part, prohibited. Printed in UK. RECA R Mop A high quality flap disc with an offset backing pad. Improved stock removal, the abrasive cloth with self-sharpening ceramic grain provides high and constant stock removal. Increased productivity, lower cost per grind and less down time. Excellent results when grinding on surfaces as well as edges of mild steel and stainless steel. Ceramic grain offers a more uniform finish. Particularly suitable for use on steel and stainless steel as well as titanium, chrome steel, brass and bronze. Art. No. Dia. (mm) Bore Size (mm) Grit Pack Qty 0666 315 040 115 22.2 40 10 0666 315 060 115 22.2 60 10 0666 325 040 125 22.2 40 10 0666 325 060 125 22.2 60 10 05 10 05 10
RECA Ultra Thin Metal Cutting Discs RECA F1 Range gives ultimate performance on either steel or stainless steel. Speed of cut: the F1 range offers excellent performance and effortless cutting. Durability: abrasive grains evenly cover the disc surface, providing maximum performance. Manufactured to the highest safety approvals: OSA approved. Durability Speed F1/S for Steel An ultra thin wheel for ferrous metal such as mild steel, giving excellent cutting performance and life. Fast, cool cuts in thin profiles, pipes, box section and sheet metal. Specification AS 60-T-BF Art. No. Dia. mm Width mm Bore Type Box Qty 0670 015 115 115 1.0 22.2 Flat 25 0670 015 125 125 1.0 22.2 Flat 25 0670 015 180 180 1.6 22.2 Flat 25 0670 015 230 230 1.9 22.2 Flat 25 F1/I for Stainless Steel Contains no impurities such as iron, sulphur or chlorine that can contaminate stainless. Super fast low heat cutting in stainless. 05 11 - JDS 03/13 Reproduction, even in part, prohibited. Printed in UK. Specification AS 60-S-BF Art. No. Dia. mm Width mm Bore Type Box Qty 0670 016 076 76 1.0 10 Flat 25 0670 016 115 115 1.0 22.2 Flat 25 0670 016 125 125 1.0 22.2 Flat 25 0670 016 180 180 1.6 22.2 Flat 25 0670 016 230 230 1.9 22.2 Flat 25 A1-2-in-1 for Stainless Steel or Steel A RECA combination cutting discs giving excellent all round performance in either steel or stainless steel. Fast cool cuts in thin profiles, pipes, box section and sheet material. Specification A 60-T-BF Art. No. Dia. mm Width mm Bore Type Box Qty 0670 0 115 115 1.0 22.2 Flat 25 0670 0 125 125 1.0 22.2 Flat 25 0670 0 230 230 1.8 22.2 D/C 25 Durability Speed 05 11 05 11
RECA Metal Cutting Discs RECA Truck Range All the discs within the Truck range share the same common advantages. Fast and efficient cutting guaranteeing excellent economy. The grinding corns will only break out of the disc when completely blunt. This ensures a sharp, abrasive disc edge giving optimum cutting performance. Performance: high elasticity, short cutting times, odourless cutting and longer life. Safety: the SWF glass fibre reinforcement and a high quality binding agent provide toughness and safety. Economy and comfort: the quick cutting from the disc causes much lower loading on the power tool. T2 - A narrow cutting wheel with a medium / hard bond that allows fast cutting. Specification A 30-P-BF Art. No. Dia. mm Width. mm Bore 0670 030 115 115 2.5 22.2 0670 030 125 125 2.5 22.2 0670 030 180 180 2.5 22.2 0670 030 230 230 2.5 22.2 Speed Durability 05 12 - JDS 03/13 Reproduction, even in part, prohibited. Printed in UK. T3 - A hard bond cutting wheel that gives a long working life even in the toughest environments. Specification A 30-T-BF Art. No. Dia. mm Width. mm Bore 0670 031 115 115 3.2 22.2 0670 031 125 125 3.2 22.2 0670 031 180 180 3.2 22.2 0670 031 230 230 3.2 22.2 Speed T4 - Combines the speed of the T2 and durability of T3. Intermediate width for strength and speed. Specification A 30-P-BF Art. No. Dia. mm Width. mm Bore 0670 030 300 300 4.0 20 0670 030 302 300 4.0 22.2 0670 030 305 300 4.0 25 0670 030 355 3 4.0 25 Durability 05 12 05 12
RECA Metal Cutting Discs R/I Cutting Disc RECA R/I cutting wheels for stainless steel combine the following standard features: Iron and sulphur free to reduce contamination. Very thin, hard and highly abrasive to give fast cutting and long life. SGF glass fibre reinforcements and high grade binding agents throughout the wheel guarantee maximum stability and safety. Specification AS 46-R-BF Art. No. Dia. mm Width. mm Bore 0670 021 230 230 2.5 22.2 Speed Durability RECA Specialist Metal Cutting Discs RECA Alu Range For the aluminium specialist. Universal use in material such as aluminium, copper, zinc. The discs are coated in a layer of paraffin to help prevent clogging whilst cutting. Art. No. Dia. mm Width. mm Bore mm 0670 120 115 115 1.5 22.2 0670 120 125 125 1.5 22.2 0670 120 230 230 1.9 22.2 05 13 - JDS 03/13 Reproduction, even in part, prohibited. Printed in UK. RECA R/Q Range A universal disc that will cut as well as a standard cutting disc and it can also be used for intermittent grinding saving cost. Ideal for use on steel or stainless steel. Art. No. Dia. mm Width. mm Bore mm 0670 022 115 115 1.9 22.2 0670 022 125 125 1.9 22.2 GRINDING CUTTING 05 13 05 13
RECA T6 Premium Metal Grinding Discs A grinding disc from RECA designed for maximum efficiency and minimum user fatigue. Highest grinding efficiency with extended product life. Aggressive grinding action with cool, effortless results. SGF glass fibre reinforcing throughout the wheel and quality control checks after each production process ensure the highest possible safety levels. Specification A24 - T-BF. Art. No. Dia. (mm) Thickness (mm) Bore (mm) 0669 030 115 115 6.00 22.2 0669 030 125 125 6.00 22.2 0669 030 180 180 6.00 22.2 0669 030 230 230 6.00 22.2 Metal grinding is a demanding procedure that requires a specialist wheel for optimum performance. Many manufacturers simply combine ordinary abrasive grit with an extremely hard bond. This produces a wheel that vibrates due to its hardness and is therefore uncomfortable to use. Also to make progress, more force is required thus increasing user fatigue. RECA T6 abrasive wheels use a medium/hard bond but specially selected abrasive grit. The abrasive grit is the highest quality raw material and the carborundum used is graded by size and shape as well as quality. The abrasive grit is the part that makes the cut and the bond is only the part that holds the grit. This ensures the premium wheels always have a sharp, hard wearing cutting edge. The grinding base is a turbo pattern. This is a balance of hard and soft bonds to give the longest life possible and most aggressive stock removal. The design is arranged into a turbine effect that also helps to cool the wheel and the work piece, thus eliminating any unnecessary friction. RECA Ultra Grinding Disc for Stainless Steel 05 14 - JDS 08/14 Reproduction, even in part, prohibited. Printed in UK. RECA Ultra grinding discs for stainless steel combine the following standard features: Iron and sulphur free to reduce contamination. A hard bond but specially selected abrasive grit, give a long life for stock removal. SGF glass fibre reinforcements and high grade binding agents throughout the wheel guarantee maximum stability and safety. Specification A 24-R-BF. Art. No. Dia. (mm) Thickness (mm) Bore (mm) 0669 001 115 115 7 22.2 0669 001 125 125 7 22.2 0669 001 230 230 8 22.2 05 14 05 14
Abrasive Disc Comparison Chart Cutting Disc - Metal Flat Cutting Disc - Stone Flat New RECA T3 Size Profix RECA T2 Proflex or T4 100x3 1162 100 30 1157 00100 115x3 1162 115 30 1157 001 0670 030 115 0670 031 115 125x3 1157 00200 0670 030 125 0670 031 125 180x3 1157 002 0670 030 180 0670 031 180 230x3 1162 230 30 1157 00300 0670 030 230 0670 031 230 300x3.5 1162 300 30 1157 003 0670 030 300 3x2.6 1162 3 30 1157 000 0670 030 355 Cutting Disc - Metal D/C Grinding Disc - Metal D/C Size New Proflex Profix 100x3 n/a 1156 00100 115x3 1166 115 30 1156 001 125x3 n/a 1156 00200 230x3 1166 230 30 1156 00300 300x3.5 1166 300 30 1156 003 3x2.6 n/a 1157 000 Size New Proflex Profix 100x3 1164 100 30 1153 030 115x3 1164 115 30 1153 03100 125x3 1164 125 30 1153 031 180x3 1164 180 30 1153 03200 230x3 1164 230 30 1153 032 Size New Proflex Profix RECA T6 100x6 1160 100 60 1151 010 115x6 1160 115 60 1151 015 0669 030 115 125x6 1160 125 60 1151 01600 0669 030 125 180x6 1160 180 60 1151 016 0669 030 180 230x6 1160 230 60 1151 01700 0669 030 230 Understanding the markings on an abrasive disc A 24 R BF The above or something like it will appear on cutting and grinding discs. What does it mean? 05 15 - JDS 04/13 Reproduction, even in part, prohibited. Printed in UK. AA = Aluminium Oxide (for working in metal) C = Silicon Carbide (for working with stone) Grit 10-24 Coarse, 30-60 Medium, Grade or Disc hardness (the strength of the bond that holds the abrasive grain together) L to O = Medium, P to S = Hard, T to Z = Very Hard Bond type BF = Bakerlite (artificial resin) bonded and reinforced with fibre fabric Different manufacturers will have slightly Different Grits or Grades on the disc. These all affect the quality and lifetime of the abrasive disc. 05 15 05 15
Proflex Abrasive Cutting and Grinding Discs A general purpose competitively priced range manufactured to European Standard EN12413. Variety of diameters and thicknesses, to suit a wide range of power tools and applications. Range available as a flat and depressed centre cutting disc, and a depressed centre grinding disc. Flat Cutting Disc - Metal These discs are used on mini grinders to large stationary cutting machines. They are designed for cutting only and must not be used for grinding. Disc marking A30RBF. Art. No. Dia Thickness Bore in Max Box (mm) (mm) mm rpm Qty 1162 100 30 100 3 16 15,200 25 1162 115 30 115 3 22 13,200 25 1162 230 30 230 3 22 6,600 25 1162 300 30 300 3.5 20 5,100 10 1162 3 30 3 2.8 25 4,000 10 Depressed Centre Cutting Disc - Metal These discs are used on mini grinders to large stationary cutting machines. They are designed for cutting only and must not be used for grinding. Disc marking A30RBF. Art. No. Dia Thickness Bore in Max Box (mm) (mm) mm rpm Qty 1164 100 30 100 3 16 15,200 25 1164 115 30 115 3 22 13,200 25 1164 125 30 125 3 22 12,200 25 1164 180 30 178 3 22 8,600 25 1164 230 30 230 3 22 6,600 25 05 16 - JDS 04/13 Reproduction, even in part, prohibited. Printed in UK. Depressed Centre Grinding Disc - Metal These discs are used on portable (hand-held) angle grinders. Disc marking A24RBF. Art. No. Dia Thickness Bore in Max Box (mm) (mm) mm rpm Qty 1160 100 60 100 6 16 15,200 25 1160 115 60 115 6 22 13,200 25 1160 125 60 125 6 22 12,200 25 1160 180 60 178 6 22 8,600 25 1160 230 60 230 6 22 6,600 25 Flat Cutting Disc - Stone These discs are used on mini grinders to large stationary cutting machines. These discs are designed for cutting only and must not be used for grinding. Disc marking C30RBF. Art. No. Dia Thickness Bore in Max Box (mm) (mm) mm rpm Qty 1166 115 30 115 3 22 13,200 25 1166 230 30 230 3 22 6,600 25 1166 300 30 300 3.5 20 5100 10 05 16 05 16
Rotary Wire Brushes Shaft Mounted Crimped Wire Cup Brushes Usually used in electric or pneumatic drills for light to medium applications. Two sizes of wheel with 6mm shanks to fit into drill chucks above 1/4 inch (6.35mm). Ideal for the removal of rust, paint and other surface contaminants to produce a clean surface finish on all types of metal. Crimped Wire Cup Brushes Crimped steel wire brushes to fit electric mini grinders, angle grinders and pneumatic grinders. Ideal for removing rust, corrosion, paint and primer in light to medium applications. Generally used to produce good, clean surfaces. Twist Knot Cup Brushes Single twists, oil-hardened wires is the feature that give these brushes their aggressive action. Brushes to suit electric mini grinders, angle grinders and pneumatic grinders. Application include heavy-duty use such as the removal of paint, scale and corrosion of all kinds. Also used for cleaning of weld seams and spotwelds. Twist Knot Bevel Wire Brushes The special shape of these brushes enable the user to work in difficult to reach places. The knots are left hand twisted to increase stability. Suitable for many heavy duty applications including cleaning plugboards and for deburring, paint stripping, removing rust, descaling and cleaning. M14 threaded, suitable for angle grinders. Knot End Wire Brush 05 17 - JDS 04/15 Reproduction, even in part, prohibited. Printed in UK. The unusual shape is ideal for cleaning and deburring in difficult to reach areas, removal of paint, rubber excess, cleaning of moulds and castings Also for working on edges and curves and in the inside of bores and pipe work. Complete with 6mm shank. Art. No. Description Dia. (mm) Spindle Wire Gauge 2695 703 0 Shaft Mount Crimped Wire Brush mm N/A 0.3mm 2695 703 700 Shaft Mount Crimped Wire Brush 70mm N/A 0.3mm 2695 610 803 Crimped Wire Cup Brush 80mm M14 0.3mm 2695 611 003 Crimped Wire Cup Brush 100mm M14 0.3mm 2695 510 605 Twist Knot Cup Brush 65mm M14 0.5mm 2695 410 808 Twist Knot Cup Brush 80mm M14 0.8mm 2695 411 008 Twist Knot Cup Brush 100mm M14 0.8mm 2695 351 114 Twist Knot Bevel Brush 100mm M14 0.5mm 2695 211 22 Knot End wire Brush 22mm 6mm 0.35mm 05 17 05 17
Hand Brushes Hand brushes are used everywhere in the metal industry, construction work or in fabrication shops. They are ideal for roughing, cleaning and de-rusting. The handles are made from beach wood and have a hanging hole for storing in the workshop. Steel Wire Art. No. Rows Length Wire Length Wire Pack (mm) (mm) Thickness Qty 2695 710 2 2 290 25 0.35 2 2695 710 3 3 290 25 0.35 2 2695 710 4 4 290 25 0.35 2 Stainless Steel Art. No. Rows Length Wire Length Wire Pack (mm) (mm) Thickness Qty 2695 720 2 2 290 25 0.30 2 2695 720 3 3 290 25 0.30 2 2695 720 4 4 290 25 0.30 2 Rotary Drum Sander The RECASAT rotary drum sander is ideal for grinding, graining, blending, cleaning, de-burring, satin finishing, conditioning and polishing metals, especially stainless steel. The RECASAT machine combines an extra heavy duty 1200 watt FEIN power tool motor with a durable & robust gearbox for guaranteed performance when using the RECA range of mops, sleeves or belts. 05 18 - JDS 05/13 Reproduction, even in part, prohibited. Printed in UK. Other features include: Electronic speed control. Angled head with M14 threaded spindle. Adjustable handle for left & right handed use. 100mm Extension spindle with single keyway. 3 metre cable and plug. Available in 110 & 240 volts. Specifications Motor Power 1200 watts Speed Range 900-2700 R.P.M. Weight (inc cable + guard) 3.66 kilos Spindle Dimensions M14 thread, 100mm long, single keyway Art. No. 110 volts 0674 99 110 Art. No. 240 volts 0674 99 240 05 18 05 18
Rotary Drum Sander Accessories Rotary Drum Expanding Wheel Rotary Drum Soft Rubber Mop GENERAL ACCESSORIES Rubber body for holding either flexible nylon sleeves or abrasive belts. Centrifugal force guarantees the abrasive belts and sleeves are non-slip. Size 90mm x 100mm. Art. No. 0674 33 100 ITEMS FOR BLENDING / SATIN FINISHING High quality, long life dense rubber mop for removing small scratches, blending and leaving a bright decorative finish on stainless steel. Art. No. Size (mm) Grit 0674 060 100 100 x 100 60 Rotary Easy Finish Mop Removes scratches and minor imperfections on stainless steel giving a near perfect finish. Art. No. Size (mm) Grit 0674 600 100 110 x 100 100 0674 600 180 110 x 100 180 Rotary Drum Flexible Nylon Mop Produce a matt or fine satin finish on stainless steel, steel, coloured metal or wood. Ideal for blending or finishing after using more abrasive flap wheels. 05 19 - JDS 08/14 Reproduction, even in part, prohibited. Printed in UK. Art. No. Size (mm) Grit 0674 610 080 100 x 100 80 0674 610 180 100 x 100 180 0674 928 100 115 x 100 280 0674 610 400 100 x 100 400 Rotary Drum Flexible Nylon Sleeve Flexible nylon sleeve for use with the expanding wheel holder. Can be used instead of flexible nylon mop drums with identical results. Art. No. Size (mm) Grit 0674 71 100 90 x 100 Coarse 0674 72 100 90 x 100 Medium 0674 73 100 90 x 100 Fine 05 19 05 19
Rotary Drum Sander Accessories Rotary Drum Flap Mop Aggressive flap wheel for removing heavier rust, corrosion & deeper scratches from stainless steel, steel & non-ferrous metals. Art. No. 100 x mm 100 x 100mm Grit 0674 405 040 0674 410 040 40 0674 260 * 0674 410 060 60 0674 405 080 0674 410 080 80 0674 405 120 0674 410 120 120 *105 x mm ** 105 x 100mm ITEMS FOR GRINDING / COARSE GRAINING Rotary Drum Abrasive Belt Abrasive belts for more aggressive grinding and coarse graining of stainless steel, steel and alloys. To be used in conjunction with rotary drum expanding wheel. Art. No. Size (mm) Grit Pack Size 0674 1 40 90 x 100 40 10 0674 1 60 90 x 100 60 10 0674 1 80 90 x 100 80 10 0674 1 120 90 x 100 120 10 05 20 - JDS 08/14 Reproduction, even in part, prohibited. Printed in UK. Rotary Drum Clean Mop A coarse, non-woven mop for removing coatings, rust, paint, etc without damaging the material. Suitable for use on stainless steel, steel, alloys and wood. 105mm x 100mm. 46 grit only. Art. No. 0674 3 ITEMS FOR CLEANING ITEMS FOR BLENDING / FINE GRAINING Rotary Drum Combination Mop Combination flap wheel & nylon abrasive that removes very little material to leave a finely grained surface. Low vibration sanding of stainless steel, metal and wood. Art. No. Size (mm) Grit 0674 510 080 100 x 100 80 0674 510 1 100 x 100 1 05 20 05 20
Spindle Sanders Abrasive Flap Wheel For grinding and shaping steel, stainless steel, non-ferrous metals, plastics and wood. Especially effective for grinding and smoothing in inaccessible areas such as pipes, box sections and tanks. Use on forged steel, malleable cast iron, cast iron, non-ferrous metals, stainless steel and wood. Art. No. Dia x Wide x Shaft Grit Ideal RPM Pack Size 0675 030 60 30 x 10 x 6 60 16,000 5 0675 030 80 30 x 10 x 6 80 16,000 5 0675 030 120 30 x 10 x 6 120 16,000 5 0675 040 60 40 x 20 x 6 60 12,000 5 0675 040 80 40 x 20 x 6 80 12,000 5 0675 040 120 40 x 20 x 6 120 12,000 5 0675 060 60 60 x 30 x 6 60 8,000 5 0675 060 80 60 x 30 x 6 80 8,000 5 0675 060 120 60 x 30 x 6 120 8,000 5 0675 080 60 80 x x 6 60 6,000 5 0675 080 80 80 x x 6 80 6,000 5 0675 080 120 80 x x 6 120 6,000 5 Nylon & Paper Combination Flap Wheel For low vibration sanding and finishing. Cleans dirt and light rust or oxidisation. Polishes to a matt or satin finish. Use on forged steel, malleable cast iron, cast iron, non-ferrous metals, stainless steel and wood. 05 21 - JDS 05/13 Reproduction, even in part, prohibited. Printed in UK. Art. No. Dia x Wide x Shaft Grit Ideal RPM Pack Size 0675 140 206 40 x 20 x 6 180/1 7,0 5 0675 1 306 x 30 x 6 180/1 6,000 5 0675 160 406 60 x 40 x 6 180/1 5,000 5 0675 180 6 80 x x 6 180/1 4,000 5 Nylon Flap Wheel For fine finishing and polishing. Cleans dirt and very light rust or oxidisation. Leaves an even surface with high shine. Used on forged steel, malleable cast iron, cast iron, non-ferrous metals, stainless steel and wood. Art. No. Dia x Wide x Shaft Grit Ideal RPM Pack Size 0675 240 206 40 x 20 x 6 120 7,0 5 0675 2 306 x 30 x 6 120 6,000 5 0675 260 406 60 x 40 x 6 120 5,000 5 0675 280 6 80 x x 6 120 4,000 5 05 21 05 21
Abrasive Bands Zirconium cloth belt with full epoxy resin bonding. Flexible sleeve gives high load bearing capacity. Cool grind prevents material tarnish. Gives excellent results when grinding casting imperfections (fettling) and car body filler with the appropriate grit. Suitable for forged steel, malleable cast iron, cast iron, stainless steel, non-ferrous metal and wood. 05 22 - JDS 08/14 Reproduction, even in part, prohibited. Printed in UK. Abrasive Belt Abrasive Belt Dia. x grit 1 grit Height Minimum RPM Maximum RPM Pack Size 0676 015 0 0676 015 1 15 x 30 25,000 36,000 10 0676 022 0 0676 022 1 22 x 20 18,000 26,000 10 0676 030 0 0676 030 1 30 x 30 13,000 19,000 10 0676 045 0 0676 045 1 45 x 30 9,000 13,000 10 0676 060 0 0676 060 1 60 x 30 6,0 9,0 10 Holder for Abrasive Bands Rubber body on 6mm steel shaft. Suitable for abrasive bands. Centrifugal force guarantees the abrasive belts are non-slip. Art. No. Dia. x Height Overall Length Maximum RPM 0676 015 15 x 30 48,000 0676 022 22 x 20 60 23,000 0676 030 30 x 30 70 19,000 0676 045 45 x 30 70 13,000 0676 060 60 x 30 70 9,0 RECA Carbide Burr Set Carbide burrs are generally used for the removal of burrs (small flakes of metal) after the machining or fabrication process. Type Double Cut, which is for universal cutting/deburring on most ferrous metals. Produces rapid stock removal in harder material with minimum tool chatter. Ideal for use on steel, stainless, steel, titanium and cast iron. 8 piece set contains: Description Cylinder Shape with End Cut Ball Nose Cylinder Ball Nose Cylinder Ball Nose Oval Ball Nose Tree Tree Tree Art. No. 0678 199 8 Size mm 12x25 8x20 12x25 12x10 6x10 10x20 10x20 12x25 05 22 05 22
RECA Carbide Burr Carbide burrs are generally used for the removal of burrs (small flakes of metal) after the machining or fabrication process. Type Double Cut, which is for universal cutting/deburring on most ferrous metals. Produces rapid stock removal in harder material with minimum tool chatter. Ideal for use on steel, stainless steel, titanium and cast iron. Shank Diameter 6mm. Cylinder with End Cut Art No. Head Dia mm 0678 111 225 12 Ball Nose Cylinder Head Length mm 25 Overall Length mm 70 Art No. Head Dia Head Length Overall mm mm Length mm 0678 120 820 8 20 65 0678 121 225 12 25 70 Ball Nose Art No. Head Dia mm 0678 131 210 12 Oval Art No. Head Dia mm 0678 140 610 6 Head Length mm 10 Head Length mm 10 Overall Length mm 55 Overall Length mm 05 23 JDS 04/15 - Reproduction, even in part prohibited. Printed in UK Ball Nose Tree Art No. Head Dia mm 0678 151 020 10 Tree Head Length mm 20 Overall Length mm 65 Art No. Head Dia Head Length Overall mm mm Length mm 0678 161 020 10 20 65 0678 161 225 12 25 65 05 23 05 23