S U P P L E M E N TA RY PRODUCTS INTRODUCED SINCE THE LAUNCH OF OUR CURRENT CATA L O G U
F R A N K A L L A R T Contact Details Frank Allart & Co. Limited, 15/35 Great Tindal Street, Ladywood, Birmingham, B16 8DR, UK. Tel: 0121 410 6000 Fax: 0121 410 6066 International Tel: +44 121 410 6000 Fax: +44 121 410 6066 Web Site: www.allart.co.uk Email: sales@allart.co.uk USA & Canada Contact Details Tel: 888 582 9110 Fax: 888 582 0283 Web Site: www.allart.co.uk Email: sales@allart.co.uk
RACK BOLTS Deeper Backset Options Available 0525 set includes: 1 bolt, 1 strike plate, 1 oval knob turn. 0526 set includes as 0525 plus 1 release. Features: B size = 45mm backset C size = 57mm backset Designed to line up with popular latch backsets. Ideal for doors with 25mm stops. Suitable for doors up to 57mm thick. Finishes available - PB, PCP, SCP, PNP, SNP, IBMA. Supplied c/w matching fixing screws. Individually boxed. 0525 0526 3 DESIGNERS & MANUFACTURERS OF ARCHITECTURAL HARDWARE
BRASSFOUNDRY Traditional Brass Knobs, Knockers & Escutcheons Available In A Variety Of Finishes DESIGNERS & MANUFACTURERS OF ARCHITECTURAL HARDWARE 4
5
6
7
FOOT & CHAIN BOLTS A Selection Of Foot & Chain Operated Spring Loaded Shoot Bolts With Hold Open Facility 6475 Bolt Foot Operated Positive stop for open close positions Two standard lengths - 100mm and 150mm Supplied c/w easyclean socket & flat strike plate 6477 Bolt Chain operated Spring loaded shoot with hold open facility Two standard body length - 100mm & 150mm 300mm long chain (other lengths available on request) Guide piece to control chain movement Supplied c/w flat strike plate & staple keeper. 6479 & 6480 Bolts - all the same features as 6477 plus: Bevelled shoot end for self latching action 6479 - for use on outward opening doors 6480 - for use on inward opening doors Finishes available - PB, PCP, SCP, PNP, SNP, IBMA Supplied c/w matching fixing screws DESIGNERS & MANUFACTURERS OF ARCHITECTURAL HARDWARE 8
9
REAL BRONZE Products Previously Not Available in Real Bronze, Introduced To Increase The Variety Of Bronze Products Available To The Specifier Technical information on these can be found in the FRANK ALLART main catalogue. See opposite for page references. There are also five new products shown that are currently unique to the Real Bronze range. Technical information for these products is detailed opposite. As with all REAL BRONZE products, these new additions are available in both the antiqued finish (as photographed) and the highly polished finish illustrated in the main catalogue - page 58 to 67 DESIGNERS & MANUFACTURERS OF ARCHITECTURAL HARDWARE 10
Main Catalogue Page Numbers For Technical Reference A = code 1022 - see page 27 B = code 3045 - see page 26 C = code 1027 - see page 25 D = code 3036 - see page 27 E = code 3041 - see page 26 F = code 7459 - see details below G = code 7453 - see details below H = code 7456 - see details below J = code 1461 to 1477 - see page 20 K = code 1731 to 1747 - see page 21 L = code 0523 to 0526 - see page 31 & 52 M = code 1867 - see details below N = code 1868 - see page 30 P = code 1871 - see page 30 R = code 3009 - see details below S = code 1884- see page 30 T = code 0533/4 - see page 31 11
ESPAGNOLETTE BOLTS Espagnolette Bolts With Reversible Cassette System For On-site Handing Narrow Design - Ideal For Windows Replacements for 0502 & 0504 (catalogue Page 50) 0822 = Lever operation 0824 = Knob operation Now with reversible cassette system for on-site handing Narrow Design - Particularly suitable for windows Outside handles also available to provide the option of operation from both sides when fitted to a door Finishes available - PB, PCP, SCP, PNP, SNP, IBMA Supplied c/w matching fixing screws Details of cassette system features, frame components and how to order can be found on page 51 of the main catalogue DESIGNERS & MANUFACTURERS OF ARCHITECTURAL HARDWARE 12
13
LARGER KNOBS A Popular Larger Version Of Current Knobs Now Available Features: 1023 & 1027 B size - Knob 55mm diameter Rose 63mm diameter 1068 B size - Knob 77mm across points Rose, 82mm across points Finishes available - PB, PCP, SCP, PNP, SNP, IBMA Supplied c/w matching fixing screws & 8mm spindles Packaged one set per box Option of microtite spindle arrangement if required DESIGNERS & MANUFACTURERS OF ARCHITECTURAL HARDWARE 14
LOCKABLE WINDOW STAYS Traditional Window Stays With The Option Of a Key Operated Locking Arrangement For Increased Security. Features: Captive locking cap - cannot be removed from window stay Removable key (one supplied with each) Locking cap is supplied in same finish as window stay Product codes: Victorian design: 0373 B Size = 254mm, 0373 size C = 305mm Finishes available - PB, PCP, SCP PNP SNP, IBMA (RBMA available on Victorian design) Supplied c/w matching fixing screws Art Deco Design: 9571 = 254mm 9574 = 305mm 15 DESIGNERS & MANUFACTURERS OF ARCHITECTURAL HARDWARE
WEATHER SEAL FITTINGS Traditional Fittings Designed To Cater For Weather Seals On Side/Top Hung Windows And Sealed Glazing Units In Sliding Sashes DESIGNERS & MANUFACTURERS OF ARCHITECTURAL HARDWARE 16
SLIDING SASH PRODUCTS When double glazed sealed units are fitted into sliding sash windows the timber left on which to fit the keeper can be very narrow. Frank Allart have redesigned two traditional fasteners with this in mind. Product code 0182 - Claw Type Sash Fastener A size - Keeper only 9.5mm wide. B size - Keeper only 12.5mm wide. Product code 0194 - Fitch Pattern Sash Fastener Keeper only 12.5mm wide. TRADITIONAL SIDE/TOP HUNG CASEMENT WINDOWS Nowadays these windows are normally fitted with weather seals as standard. It is important that the fasteners are designed to accommodate these seals otherwise the mortice/wedge plate fixing screws can foul the weather seal channel and effect performance. Frank Allart have designed two new casement fasteners with this in mind. Product code 0342 - Casement Fastener - (Reversible Handle) Product code 0346 - Wedge Fastener - (Reversible Handle) Finishes available - PB, PCP, SCP, PNP, SNP, IBMA All fasteners are supplied C/W matching fixing screws. 17
FLUSH FITTING HARDWARE Specifically Designed To Supplement The Existing Range Of Flush Fittings For Sliding And Folding Doors Product code 1084 - Round Flush Ring Handle Available in 3 sizes - 63mm, 75mm, 90mm diameter. Made from solid brass forging for maximum strength. Supplied C/W matching fixing screws & 8mm spindles. Product code 1090 - Flush Release & Spindle Designed to work with type 1084 & type 1086 flush ring handles. Ideal for Hotel bathrooms with sliding (Pocket) doors. Supplied C/W spindle (as shown) & matching fixing screws. Product code 4380 - Door Edge Flush Handle Spring loaded for automatic return when released. Supplied C/W matching fixing screws. Finishes available - PB, PCP, SCP, PNP, SNP, IBMA. DESIGNERS & MANUFACTURERS OF ARCHITECTURAL HARDWARE 18
LOCKABLE DOOR BOLTS Introduced To Meet The Demands Of Increased Security Features: Ability to lock in both closed and open positions. Captive locking cap - cannot be removed from the bolt. Removable key (one supplied with each bolt). Locking cap will be supplied with same finish as the bolt. Finishes available - PB, PCP, SCP, PNP, SNP, IBMA. supplied C/W matching fixing screws. Product code 6474 34mm wide. Standard lengths - 150mm, 200mm. Longer lengths are available to order. 10mm x 10mm shoot section. Product code 6482 43mm wide. Standard lengths - 150mm, 200mm, 250mm, 300mm. Longer lengths are available to order. 14mm x 8mm shoot section. 19 DESIGNERS & MANUFACTURERS OF ARCHITECTURAL HARDWARE
LOCKABLE ESPAGNOLETTE BOLTS New Design Now Available, Cassette - Type Internal Operating Mechanism Replacements for 0506 and 0506NL (catalogue page 50) 0836 - lever operation (0846 - non-locking version) 0837 - knob operation (0847 - non-locking version) New cassette-type internal operating mechanism 5 lever mechanism standard on lockable version Outside handles are also available to provide the option of operating and locking from both sides of the door Strong new lever/knob fixing improves performance Standard rod lengths suit opening of 2134mm (84 ) Rods to suit other openings available made-to-order Finishes available - PB, PCP, SCP, PNP, SNP, IBMA Supplied c/w matching fixing screws For information on frame fixing components and details of how to order, please see page 50 - main catalogue Fully illustrated fitting instructions included DESIGNERS & MANUFACTURERS OF ARCHITECTURAL HARDWARE 20
21
NOTES DESIGNERS & MANUFACTURERS OF ARCHITECTURAL HARDWARE 22