NOTES (1) This applies only to GE located in Whippany, New Jersey. (2) When the drawing calls out a prime contractor's special process specification, the supplier shall only use a special processor from that prime contractor's (ASPL). For example, when a drawing references Boeing process spec BAC 5423, the supplier shall only subcontract to a processor on the Boeing D1-4426 list. (3) When the GE purchase order and/or SQAR requires the use of a prime contractor's ASPL, this requirement applies whether the drawing calls out a prime contractor's spec (e.g. Boeing BAC 5423) or an industry spec (e.g. MIL-DTL-5541, AMS 2700, ASTM-E-1417). (4) This document is uncontrolled when printed - please check the ASPL on the link below for the latest revision status prior to selecting a special processor. http://geaviationsystems.com/services/approvals/
Table of Contents Process Specification Process Description Page AMS 2404 Electroless Nickel Plating 4 AMS 2418 (MIL-C-14550) Copper Plating 4 AMS 2700 (AMS-QQ-P-35) Passivation of Corrosion Resistant Steels 5 AMS 2759/6 Gas Nitriding & Heat Treatment of Low-Alloy Steel 6 AMS 2759/7 (Supercedes S121M1) Carburizing 7 AMS 2759/8 (S107) Ion Nitriding 8 AMS-H-6088 Heat Treatment of Aluminum 8 AMS-H-6875 (S115) Heat Treatment of Steel 9 AMS-H-7199 Heat Treatment of Wrought Copper/Berylluim 11 AMS-STD-2219 (MIL-W-8604) (S120) Welding, Fusion 11 ASTM B 633 Electrodeposited Zinc Coating on Iron & Steel 11 ASTM-B-545 (MIL-T-10727) Tin Plating 12 ASTM-B700 (QQ-S-365) Silver Plating 12 ASTM-E-1417 (MIL-STD-6866) Penetrant Inspection 13 ASTM-E-1444 (MIL-STD-1949) Magnetic Particle Inspection 13 ASTM-E-1742 (MIL-STD-453) Inspection Radiography 14 AWS-C3.4-C3.7 (MIL-B-7883) Brazing 15 EASA WORK European Safety Agency (EASA) - Approved 16 ELECTRONIC TESTING Electronic Component/Product Testing 16 ILS (for GE Only) Parts Distributers 17 MIL-A-8625 Anodic Coatings for Aluminum 18 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 2 of 29
MIL-C-23422 Electrolizing 19 MIL-C-26074 Coatings, Electroless Nickel 20 MIL-DTL-13924 (MIL-C-13924) Coating, Black Oxide for Ferrous Metals 21 MIL-DTL-16232 (DOD-P-16232) Phosphate Coating, Heavy, Zinc or Manganese 21 MIL-DTL-5541 Chemical Conversion Coating for Aluminum 22 MIL-PRF-46010 (S127M1) Lubricant, Solid Film Coating 23 MIS-20007 Painting for Missile & Ground Support Equipment 24 NO SPEC Induction Heat Treating 24 Outside Processors (for GE Only) Machining Processes 25 S202 Teflon Spray Coating 26 SAE-AMS-QQ-C-320 Chromium Plating 27 SAE-AMS-QQ-P-416 (S139) Cadmium Plating 28 Slik Shot <TM> Nickel/Teflon Coating 29 Updates to ASPL ASPL Changes from Last Revision 100 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 3 of 29
AMS 2404 Electroless Nickel Plating Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 AMS 2418 (MIL-C-14550) Copper Plating Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com Lawrence Ripak Co., Inc. (1) 165 Field Street West Babylon, NY 11704 Phone (516) 694-1818 or 800-652-0075 Fax / Website (516) 694-1848 Lawrence Ripak Co., Inc. (1) 165 Field Street West Babylon, NY 11704 Phone (516) 694-1818 or 800-652-0075 Fax / Website (516) 694-1848 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 4 of 29
AMS 2418 (MIL-C-14550) Copper Plating Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 AMS 2700 (AMS-QQ-P-35) Passivation of Corrosion Resistant Steels B & M Finishers (1) 201 S. 31St Street Kenilworth, NJ 07033 Phone (908) 241-5640 Fax / Website (908) 241-5061 Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com Lawrence Ripak Co., Inc. (1) 165 Field Street West Babylon, NY 11704 Phone (516) 694-1818 or 800-652-0075 Fax / Website (516) 694-1848 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 5 of 29
AMS 2700 (AMS-QQ-P-35) Passivation of Corrosion Resistant Steels Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 AMS 2759/6 Gas Nitriding & Heat Treatment of Low-Alloy Steel Advanced Heat Treat Corp. (MidPort Facility) (1) 2825 Midport Blvd. Waterloo, IA 50703 Phone 319-232-5221 Fax / Website 319-232-4942 Bennett Heat Treating & Brazing (1) 690 Ferry St. Newark, NJ 07105 Phone (973) 589-0590 Fax / Website (973) 589-6518 Braddock Metallurgical (1) 123 Chimney Rock Road Bridgewater, NJ 08807-3126 Phone 732-356-2906 Fax / Website 732-356-2080; www.braddockmt.com (1) Processors used by GE (3) GE suppliers that perform their own processes Page 6 of 29
AMS 2759/6 Gas Nitriding & Heat Treatment of Low-Alloy Steel Nitrex Inc. (2) 441 Perrymont Avenue San Jose, CA 95125 Phone (408) 275-0330 Fax / Website (408) 279-1982; www.nitrex.com AMS 2759/7 (Supercedes S121M1) Carburizing Advanced Heat Treat Corp. (Burton Facility) (1) 2839 Burton Ave Waterloo, IA 50703 Phone 319-232.0745 Fax / Website 319-232-9971 Bennett Heat Treating & Brazing (1) 690 Ferry St. Newark, NJ 07105 Phone (973) 589-0590 Fax / Website (973) 589-6518 Nitrex Inc. (2) 441 Perrymont Avenue San Jose, CA 95125 Phone (408) 275-0330 Fax / Website (408) 279-1982; www.nitrex.com (1) Processors used by GE (3) GE suppliers that perform their own processes Page 7 of 29
AMS 2759/8 (S107) Ion Nitriding Advanced Heat Treat Corp. (MidPort Facility) (1) 2825 Midport Blvd. Waterloo, IA 50703 Phone 319-232-5221 Fax / Website 319-232-4942 AMS-H-6088 Heat Treatment of Aluminum Bennett Heat Treating & Brazing (1) 690 Ferry St. Newark, NJ 07105 Phone (973) 589-0590 Fax / Website (973) 589-6518 Braddock Metallurgical (1) 123 Chimney Rock Road Bridgewater, NJ 08807-3126 Phone 732-356-2906 Fax / Website 732-356-2080; www.braddockmt.com Braddock Metallurgical Aerospace Service (2) 507 Industrial Way Boynton Beach, FL 33426 Phone 561-622-2200 Fax / Website 561-622-2316 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 8 of 29
AMS-H-6875 (S115) Heat Treatment of Steel Advanced Heat Treat Corp. (Burton Facility) (1) 2839 Burton Ave Waterloo, IA 50703 Phone 319-232.0745 Fax / Website 319-232-9971 Bennett Heat Treating & Brazing (1) 690 Ferry St. Newark, NJ 07105 Phone (973) 589-0590 Fax / Website (973) 589-6518 Bennett Heat Treating and Brazing (1) Gingko Industrial Pk82 Richard Rd Ivyland, PA 18974 Phone 215-674-8120 Fax / Website 215-674-1312 Vacuum process only Braddock Metallurgical (1) 123 Chimney Rock Road Bridgewater, NJ 08807-3126 Phone 732-356-2906 Fax / Website 732-356-2080; www.braddockmt.com Braddock Metallurgical (2) 14600 Duval Place West Jacksonville, FL 32218-2475 Phone 904-741-4777 Fax / Website 904-741-4813 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 9 of 29
AMS-H-6875 (S115) Heat Treatment of Steel Braddock Metallurgical Aerospace Service (2) 507 Industrial Way Boynton Beach, FL 33426 Phone 561-622-2200 Fax / Website 561-622-2316 Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com Boeing Approved per BAC 5617 & BAC 5619. Stress Relief Only. Hercules Heat Treating Corp. (1) 101-113 Classon Ave. Brooklyn, NY 11205 Phone 718-625-1266 Fax / Website 718-875-0582; www.herculesht.com Lawrence Ripak Co., Inc. (1) 165 Field Street West Babylon, NY 11704 Phone (516) 694-1818 or 800-652-0075 Fax / Website (516) 694-1848 Nitrex Inc. (2) 441 Perrymont Avenue San Jose, CA 95125 Phone (408) 275-0330 Fax / Website (408) 279-1982; www.nitrex.com (1) Processors used by GE (3) GE suppliers that perform their own processes Page 10 of 29
AMS-H-7199 Heat Treatment of Wrought Copper/Berylluim Braddock Metallurgical (1) 123 Chimney Rock Road Bridgewater, NJ 08807-3126 Phone 732-356-2906 Fax / Website 732-356-2080; www.braddockmt.com AMS-STD-2219 (MIL-W-8604) (S120) Welding, Fusion G Cotter Enterprises (1) 48 Brown Ave. Springfield, NJ 07081 Phone (973) 376-5840 Fax / Website (973) 376-5937 ASTM B 633 Electrodeposited Zinc Coating on Iron & Steel Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 11 of 29
ASTM-B-545 (MIL-T-10727) Tin Plating Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 ASTM-B700 (QQ-S-365) Silver Plating Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 12 of 29
ASTM-E-1417 (MIL-STD-6866) Penetrant Inspection Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com G Cotter Enterprises (1) 48 Brown Ave. Springfield, NJ 07081 Phone (973) 376-5840 Fax / Website (973) 376-5937 Lawrence Ripak Co., Inc. (1) 165 Field Street West Babylon, NY 11704 Phone (516) 694-1818 or 800-652-0075 Fax / Website (516) 694-1848 ASTM-E-1444 (MIL-STD-1949) Magnetic Particle Inspection Advanced Heat Treat Corp. (Burton Facility) (1) 2839 Burton Ave Waterloo, IA 50703 Phone 319-232.0745 Fax / Website 319-232-9971 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 13 of 29
ASTM-E-1444 (MIL-STD-1949) Magnetic Particle Inspection Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com G Cotter Enterprises (1) 48 Brown Ave. Springfield, NJ 07081 Phone (973) 376-5840 Fax / Website (973) 376-5937 Lawrence Ripak Co., Inc. (1) 165 Field Street West Babylon, NY 11704 Phone (516) 694-1818 or 800-652-0075 Fax / Website (516) 694-1848 ASTM-E-1742 (MIL-STD-453) Inspection Radiography G Cotter Enterprises (1) 48 Brown Ave. Springfield, NJ 07081 Phone (973) 376-5840 Fax / Website (973) 376-5937 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 14 of 29
ASTM-E-1742 (MIL-STD-453) Inspection Radiography Lawrence Ripak Co., Inc. (1) 165 Field Street West Babylon, NY 11704 Phone (516) 694-1818 or 800-652-0075 Fax / Website (516) 694-1848 AWS-C3.4-C3.7 (MIL-B-7883) Brazing Bennett Heat Treating and Brazing (1) Gingko Industrial Pk82 Richard Rd Ivyland, PA 18974 Phone 215-674-8120 Fax / Website 215-674-1312 Vacuum process only Braddock Metallurgical (1) 123 Chimney Rock Road Bridgewater, NJ 08807-3126 Phone 732-356-2906 Fax / Website 732-356-2080; www.braddockmt.com (1) Processors used by GE (3) GE suppliers that perform their own processes Page 15 of 29
EASA WORK European Safety Agency (EASA) - Approved B & M Finishers (1) 201 S. 31St Street Kenilworth, NJ 07033 Phone (908) 241-5640 Fax / Website (908) 241-5061 Braddock Metallurgical (1) 123 Chimney Rock Road Bridgewater, NJ 08807-3126 Phone 732-356-2906 Fax / Website 732-356-2080; www.braddockmt.com Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 Requires GE on-site audit. Used by Alfa Machine for Electroless Nickel Plating. ELECTRONIC TESTING Electronic Component/Product Testing NJMET (1) 1240 Main Avenue Clifton, NJ 07011 Phone 973-546-5393 Fax / Website 973-546-1836 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 16 of 29
ILS (for GE Only) Parts Distributers Airbound Technologies (1) 4909 NW 108th Terrace Coral Springs, FL 33076 Phone (954) 227-1601 Fax / Website (954) 227-5166 Heli-Parts of Texas (1) 2223 FM 2953 St. Jo, TX 76265-2380 Phone 940-966-3304 Fax / Website Heli-Sysco, Inc. (1) 60 Enter Lane Islandia, NY 11749-4811 Phone 631-234-5999 Fax / Website Jet Midwest (1) 9200 NW 112th Street Kansas City, MO 64153 Phone 913-321-3732 Fax / Website 913-371-0872 Jetson Aerospace (1) 10050 NW 116th Way, Suite 15 Medley, FL 33178 Phone 305-887-4044 Fax / Website 305-887-4024 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 17 of 29
ILS (for GE Only) Parts Distributers JTA, INC. (1) 2040 Airway Ave Fort Collins, CO 80524 Phone 970-221-4230 Fax / Website MIL-A-8625 Anodic Coatings for Aluminum Anodic Inc. (1) Rt. 111 Stevenson, CT 06491 Phone (203) 268-9966 Fax / Website (203) 452-1893; www.anodic.com B & M Finishers (1) 201 S. 31St Street Kenilworth, NJ 07033 Phone (908) 241-5640 Fax / Website (908) 241-5061 Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com Type I,II,III I, II & III (1) Processors used by GE (3) GE suppliers that perform their own processes Page 18 of 29
MIL-A-8625 Anodic Coatings for Aluminum Hillock Anodizing (2) 5101 Comly Street Philadelphia, PA 19135 Phone (215) 535-8090 Fax / Website (215) 288-5110; www.hillockanodizing.com I, II & III Lawrence Ripak Co., Inc. (1) 165 Field Street West Babylon, NY 11704 Phone (516) 694-1818 or 800-652-0075 Fax / Website (516) 694-1848 Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 MIL-C-23422 Electrolizing Electrolizing Inc. (1) 20 Houghton St. Providence, RI 02904 Phone (401) 861-5900 Fax / Website (401) 421-9512 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 19 of 29
MIL-C-23422 Electrolizing Electrolizing Inc. (2) 1947 Hooper Ave. Los Angeles, CA 90011 Phone (213) 749-7876 Fax / Website (213) 749-9880 MIL-C-26074 Coatings, Electroless Nickel Diamond Chrome Plating (2) 604 S. Michigan Ave. Howell, MI 48843 Phone (517) 546-0150 Fax / Website (517) 546-3666; www.diamondchromeplating.com Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 20 of 29
MIL-DTL-13924 (MIL-C-13924) Coating, Black Oxide for Ferrous Metals Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 MIL-DTL-16232 (DOD-P-16232) Phosphate Coating, Heavy, Zinc or Manganese Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com M Haward Corp. (1) 29 Porete Ave. North Arlington, NJ 07031 Phone (201) 991-8777 Fax / Website (201) 991-1903 Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 21 of 29
MIL-DTL-5541 Chemical Conversion Coating for Aluminum Anodic Inc. (1) Rt. 111 Stevenson, CT 06491 Phone (203) 268-9966 Fax / Website (203) 452-1893; www.anodic.com B & M Finishers (1) 201 S. 31St Street Kenilworth, NJ 07033 Phone (908) 241-5640 Fax / Website (908) 241-5061 Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com Hillock Anodizing (2) 5101 Comly Street Philadelphia, PA 19135 Phone (215) 535-8090 Fax / Website (215) 288-5110; www.hillockanodizing.com Lawrence Ripak Co., Inc. (1) 165 Field Street West Babylon, NY 11704 Phone (516) 694-1818 or 800-652-0075 Fax / Website (516) 694-1848 Class 1A,3 Class 1A Conversion Coating on Aluminum (Immersion App. Only). (1) Processors used by GE (3) GE suppliers that perform their own processes Page 22 of 29
MIL-DTL-5541 Chemical Conversion Coating for Aluminum Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 MIL-PRF-46010 (S127M1) Lubricant, Solid Film Coating Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com Haward Corp. (1) 29 Porete Ave. North Arlington, NJ 07031 Phone (201) 991-8777 Fax / Website (201) 991-1903 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 23 of 29
MIS-20007 Painting for Missile & Ground Support Equipment Harmony Metal Products (1) 1412 N.H. Rte 175 Holderness, NH 03245 Phone 603-536-4415 Fax / Website 603-536-4630 NO SPEC Induction Heat Treating Braddock Metallurgical (1) 123 Chimney Rock Road Bridgewater, NJ 08807-3126 Phone 732-356-2906 Fax / Website 732-356-2080; www.braddockmt.com Nitrex Inc. (2) 441 Perrymont Avenue San Jose, CA 95125 Phone (408) 275-0330 Fax / Website (408) 279-1982; www.nitrex.com (1) Processors used by GE (3) GE suppliers that perform their own processes Page 24 of 29
Outside Processors (for GE Only) Machining Processes AB Precision Grinding Co., Inc. (1) 4806 Kesslerville Road Easton, PA 18040 Phone 610-253-2777 Fax / Website 610-258-4720 California Jig Grinding (1) 3700 San Gabriel River Parkway Pico Rivera, CA 90660 Phone 562-692-7467 Fax / Website 562-699-3194 Drilling Dynamics Inc (1) 336 Boston Post Rd Milford, CT 06460 Phone 203-783-1395 Fax / Website Dynapar (1) 1675 Delany Rd Gurnee, IL 60031 Phone 800-873-8731 Fax / Website 847-662-2666 Fabrication Services & Grinding Co. (1) 48 Long Mtn. Drive South Effort, PA 18330 Phone 570-606-4438 Fax / Website 570-606-4483 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 25 of 29
Outside Processors (for GE Only) Machining Processes J & S Precision Balancing, Inc. (1) 385 Central Ave Bohemia, NY 11716 Phone 516-248-8416 Fax / Website Nowak Inc. (1) 17 Robert St Wharton, NJ 07885 Phone 973-366-7208 Fax / Website PENN UNITED COSTA RICA S.A. (1) Lot#7 Parkway #604, Global Park Free Zone, P La Aurora Heredia, Costa Rica, Phone 011-506-239-2242 Fax / Website 011-506-239-3773 S202 Teflon Spray Coating Haward Corp. (1) 29 Porete Ave. North Arlington, NJ 07031 Phone (201) 991-8777 Fax / Website (201) 991-1903 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 26 of 29
SAE-AMS-QQ-C-320 Chromium Plating Diamond Chrome Plating (2) 604 S. Michigan Ave. Howell, MI 48843 Phone (517) 546-0150 Fax / Website (517) 546-3666; www.diamondchromeplating.com Electrolizing Inc. (2) 1947 Hooper Ave. Los Angeles, CA 90011 Phone (213) 749-7876 Fax / Website (213) 749-9880 Electrolizing Inc. (1) 20 Houghton St. Providence, RI 02904 Phone (401) 861-5900 Fax / Website (401) 421-9512 Hard Chromium Plating (QPL Class 4 only)- Boeing approved per BAC 5709 Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 27 of 29
SAE-AMS-QQ-P-416 (S139) Cadmium Plating Diamond Chrome Plating (2) 604 S. Michigan Ave. Howell, MI 48843 Phone (517) 546-0150 Fax / Website (517) 546-3666; www.diamondchromeplating.com Embee Inc. (2) 2136 S. Hathaway Santa Ana, CA 92705 Phone (714) 546-9842 Fax / Website (714) 546-4037; http://www.embee.com I & II Lawrence Ripak Co., Inc. (1) 165 Field Street West Babylon, NY 11704 Phone (516) 694-1818 or 800-652-0075 Fax / Website (516) 694-1848 Westfield Electroplating Co. (2) 68 N. Elm St. Westfield, MA 01085 Phone 413-568-3716 Fax / Website 413-572-2697 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 28 of 29
Slik Shot <TM> Nickel/Teflon Coating Nutmeg Chrome Corporation (1) 680 Oakwood Ave West Hartford, CT 06110 Phone 860-953-5411 Fax / Website 860-953-6502 (1) Processors used by GE (3) GE suppliers that perform their own processes Page 29 of 29