HARDI ISO NOZZLES Nozzle product guide
Table of contents HARDI nozzle supremacy............ 3 Nozzle technology................ 4 ield spraying hoosing nozzles for arable crops......... HARDI nozzles on all liquid systems................ HARDI ISO 1 Standard lat an nozzles... HARDI ISO LD 1 Low Drift nozzles...... ISO INIDRIT Air Inclusion nozzles..... HARDI ISO INJET Air Inclusion nozzles...... 13 HARDI ISO 0 lat an nozzles.......... HARDI QUINTASTREA hole fertilizer nozzles... 1 13 Solid stream nozzle.............. 1 Large drop flat spray nozzle............. 1 V ineyard and orchard spraying alibration of mistblowers............... 1 eramic hollow cone nozzles........... 1 Solid stream nozzle - ERAI........... 1 alibration of field crop sprayers HARDI 13 one nozzles................... 1 Hand operated spraying alibration of hand operated sprayers............. H Hollow cone nozzle SYNTAL............... 21 RELEX nozzle SYNTAL................ 21 HARDI Adjustable nozzle - SYNTAL................... 21 Band spraying alibration for band spraying.................... 22 HARDI 40E 0 Even spray nozzles ISO ISO ISO Special nozzles ISO ISO ISO End nozzles............. ISO ISO ISO 4 lat spray nozzle SYNTAL. SO ISO ISO ISO ISO ISO ISO 42 2 lat spray nozzle SYNTAL. SO ISO ISO ISO 131 isting nozzle SYNTAL.... ISO ISO ISO SO ISO ISO ISO 30 Deflector spray nozzle SYNTAL ISO ISO ISO IS ulti-hole rinsing nozzle SYNTAL.. SO ISO ISO ISO I ISO ISO ISO ISO Agitation nozzle - SYNTAL.. SO ISO ISO ISO ISO Tank cleaning nozzle...... ISO ISO ISO ISO ISO HARDI DUOAP..... SO ISO ISO ISO ISO ISO 2 ISO ISO ISO ISO ISO ISO ilter & ittings.. SO ISO ISO ISO ISO ISO ISO SO............... 22................ 23................ 24................ 24................ 24................ 24................ 2................ 2................ 2................ 2................ 2
HARDI nozzle supremacy Precise, dependable and accountable HARDI has produced sprayers since 1 - meeting the needs of all farmers and crops worldwide - a key goal that has demanded the world s best nozzles. Today the same basic HARDI philosophy promotes the efficient, effective and responsible plant care that ensures quality food production. The nozzle can dominate the sprayer performance. All of the sprayer components are important for safe and effective use, but it is the nozzle that can have the major influence on the performance of the plant protecting product that it will apply. HARDI quality nozzle production in Nørre Alslev, Denmark HARDI 's modern production facilities and technical abilities have resulted in the superior precision and durability of HARDI nozzles. The nozzle controls: The throughput [and therefore the dose] Quality of distribution Drop spectrum and coverage Distribution over the target Drop retention or reflection The degree of drift and downwind fallout Quality control includes not just laboratory measurements but the use of HARDI nozzles in the field, under commercial conditions. Every drop of spray needs to be both accounted for - and documented - in order to ensure the quality of food delivered onto the dining table, and it meets the demands of the public today. HARDI quality nozzles meet these increasing demands with world leading research and development. All these functions are considered by HARDI to ensure that the spray liquid is deposited exactly where it is needed, in its most effective form, and is not wasted. HARDI has combined both design and material selection to produce a range of nozzles that suit the broad demands of both crops and the vast array of agrochemical products available today. This has been the basis for HARDI s worldwide success. lose co-operation between farmers, advisers, chemical companies, independent and regulatory bodies with HARDI s agronomists has been the backbone of this continuing success. Quality in production ensures optimal field performance. The application of plant protection products to crops involves issues now, which go beyond traditional considerations such as economy and efficiency. Now nozzle choice and performance also relates to broad issues of drift such as airborne losses, downwind fallout and deposits on non-target surfaces within the treated area itself. All of these issues need to be carefully considered. HARDI is a world leader in understanding the concept of spray accountability and it is this knowledge that underpins its world leadership in today's spraying. Today, HARDI has developed the world s largest ISO nozzle programs for agriculture, horticulture [including most vegetables], viticulture as well as many more specialist needs. This nozzle guide will help you select the best nozzle for your needs, consider environmental aspects, and help you calibrate it for optimal use to ensure that you meet all of today s needs when using crop protection products. HARDI INTERNATIONAL A/S Nørre Alslev 3
Nozzle technology undamental research with nozzles by HARDI agro-scientists is conducted in their own dedicated laboratories and those of independent research centers at many key institutions throughout the world. Sites where field research is conducted are very diverse - ranging from the temperate conditions of Northern Europe to the tropical crops of Australia. Instrumentation used in HARDI s laboratories is at the leading edge in droplet size analysis studies. It is this broad, but intensive, approach combined with state of the art manufacturing techniques and computerized quality control programs, that guarantees HARDI nozzles will meet the demands of better crop protection. easuring droplet sizes The droplet spectrum is characterized by the average droplet size based on volume (VD) and the range that indicates the uniformity of the atomization. A laser Phase Doppler Particle Analyser (Aerometrics, PDPA) supplies this information instantaneously and is used to constantly monitor the spray quality of our nozzles in our laboratory. HARDI lat fan nozzles HARDI LD LowDrift nozzles x x 3 3-02-1 13 GPA PH LD-02-1 13 GPA PH HARDI INIDRIT nozzles HARDI INJET nozzles x x INIDRIT-02-1 13 GPA PH 3 3 4 INJET-02-1 13 GPA PH
Nozzle technology Nozzle development hanges in cropping practices, regulatory restraints and the introduction of new agrochemicals are just some of the forces that ensure new nozzle developments, which have and will continue to take place at HARDI. This activity closely involves our agronomists, engineers and specialist tool makers. armer's needs are recognized and met with HARDI nozzles designed to provide the precision they demand today. Wind Tunnel Studies Quality control Samples of all HARDI nozzles are constantly monitored by Quality ontrol - using devices such as this state of the art nozzle distribution table. Airborne drift and downwind fallout are tested and documented in the controlled conditions of a wind tunnel for all HARDI nozzles. This leads to approvals as drift reducing equipment for buffer zones in many countries. Together with field research this has given the HARDI nozzle range approvals in the UK, Holland and Germany to be used closer to waterways than previously allowed with traditional nozzles. High Speed Video odern high-speed video techniques are used to investigate the droplets behaviour on their way to the target and when impacting on a leaf. These tests are done with clean water and with actives to simulate in-field spraying. High Quality aterials HARDI nozzles are produced from high quality SYNTAL plastic that ensures both precision and durability. Where highly abrasive compounds are to be sprayed, the selection of HARDI ERAI nozzles will maintain this same level of superior durability. Deposit tests luorescent UV dye is used to test the exact amount of liquid that stays on the leaf after spraying. This is the key factor for the biological efficacy of the plant protection products. 4 3 2 1 0 Brass Stainless steel SYNTAL Durability relative to brass flat spray nozzle at the manufacturer s recommended pressure (Kim Sintorn, Swedish University). Efficacy trials Specialist field equipment is used at the Danish Weed Research Institute to test the efficacy of herbicide performance when using HARDI nozzles.
ie ld sp r a y i n g hoosing nozzles for arable crops A nozzle for every spray job hoosing nozzles hoice of nozzle type and size may have to balance the need to ensure optimal biological effect with a consideration for wind drift, sprayer capacity that influences field work rates as well as forward speed. The tables below can be used when choosing the right nozzle for a spray job. Important precondition for the tables: Always follow label recommendation for spray quality and volume rate if nothing is stated the tables can be used as a guideline. To minimize wind drift and maintain even liquid distribution, spraying pressure between to is recommended (INJET: to 1 ). Higher pressures with TWIN air assistance are also acceptable. Spraying against grass weeds or on other vertical targets it is important to use a relative fine spray. 1-4 1-2 - -3-3-0 LowDrift INJET Drift reduction / Spraying capacity The reduced number of very small droplets produced by LowDrift nozzles makes them less sensitive to wind. Therefore they can be used on conventional sprayers under sub-optimal conditions. In particular, they are used when spraying lower water volumes. INIDRIT and INJET nozzles mix air with the spray liquid to coarsen the atomization. Drift is substantially reduced with these nozzles so that field delays due to high wind speeds are minimized and timing is improved. The biological advantage gained through this better field timing may mask the use of coarser sprays. Their use has become critical to conventional spraying practice which has to try and meet both environmental needs without risking the effectiveness of the product to be applied. oarse edium ine 0 microns Standard Very oarse 0 microns TWIN 0 microns Bilological efficiency Growth stage eekes Decimal (Zadox) ine droplets = improved coverage Drift/Biological efficiency index microns Small droplets from STANDARD lat an nozzles may offer an unsurpassed liquid distribution and an effective coverage of the target surface. HARDI TWIN sprayers can safely use these Water volumes GPA small standard 1 nozzles even GPA - 1 GPA when weather GPA GPA conditions are 2 GPA not optimal. 2 GPA Small dicot weeds need good coverage either through fine droplets or if using a coarser spray by compensating with a higher volume rate. or large dicot weeds coarse atomization can be used. ungicide treatments are often less sensitive to spray quality; medium drops can be recommended. Remember that the volume rate must be adjusted to crop density and needs for penetration to more basal parts. Generally the water rate for conventional spraying should not be less than 1 GPA and for TWIN not less than.. GPA for optimum efficacy at lower doses. When mixing products or using products with more than one mode of action adjust to the most demanding component of that product mix. Spray quality and capacity for HARDI ISO 1 flat fan nozzles ISO size/color HARDI ISO -1 HARDI ISO LD-1 HARDI ISO INIDRIT HARDI ISO INJET Standard flat fan nozzles LowDrift nozzles Air inclusion nozzles Air inclusion nozzles GP ISO size/color GP ISO size/color GP ISO size/color 0 0 1 GP 00-Pink 0.03 0.0 0.0 0.04 0.02 0.0 01-Orange 0.01 0.0 0.0 0.1 0.2 0.132 01-Orange 0.01 0.0 0.0 0.1 0.2 0.132 01-Orange 0.0 0.2 0.132 0.1 0.1 0.13 01-Green 0. 0.1 0.1 0.1 0.14 0.1 01-Green 0. 0.1 0.1 0.1 0.14 0.1 01-Green 0. 0.1 0.1 0.1 0.14 0.1 01-Green 0.1 0.14 0.1 0.2 0.23 0.2 02-Yellow 0.1 0.13 0.0 0.224 0.24 0.2 02-Yellow 0.1 0.13 0.0 0.224 0.24 0.2 02-Yellow 0.1 0.13 0.0 0.224 0.24 0.2 02-Yellow 0.0 0.24 0.2 0.23 0.31 0.34 02-Lilac 0.1 0.21 0.2 0.20 0. 0.331 02-Lilac 0.1 0.21 0.2 0.20 0. 0.331 02-Lilac 0.1 0.21 0.2 0.20 0. 0.331 02-Lilac 0.2 0. 0.331 0.34 0.3 0.433 03-Blue 0.2 0.2 0.0 0.33 0.3 0.3 03-Blue 0.2 0.2 0.0 0.33 0.3 0.3 03-Blue 0.2 0.2 0.0 0.33 0.3 0.3 03-Blue 0.0 0.3 0.3 0.424 0.44 0. 04-Red 0.23 0.34 0.0 0.44 0.40 0.2 04-Red 0.23 0.34 0.0 0.44 0.40 0.2 04-Red 0.23 0.34 0.0 0.44 0.40 0.2 04-Red 0.0 0.40 0.2 0. 0.32 0.3 0-Brown 0.34 0.433 0.0 0. 0. 0.1 0-Brown 0.34 0.433 0.0 0. 0. 0.1 0-Brown 0.34 0.433 0.0 0. 0. 0.1 0-Brown 0.0 0. 0.1 0. 0.1 0. 0-Grey 0.424 0. 0.0 0.1 0.3 0.4 0-Grey 0.0 0.3 0.4 0.4 0.4 1.03 0-White 0. 0.3 0.00 0.4 0.0 1.0 0-White 0.00 0.0 1.0 1.131 1.2 1.3 -Light blue 0. 0. 1.000 1. 1.22 1.323 Spray quality: ine oarse edium Very coarse
i eld s pra y i n g HARDI nozzles on all liquid systems HARDI ISO nozzles fulfill ISO (International Standards Organization) standards regarding flow, numbers, colors and outer dimensions. This ensures that it is easy to fit HARDI ISO nozzles on all sprayer brands. You can see the fittings below, which allow you to adapt HARDI ISO nozzles to your sprayer. On sprayers with HARDI SNAP-IT systems, the HARDI OLOR TIPS (T) are recommended for safe and easy handling. or INJET nozzles use the 333 black nozzle cap. HARDI part 4233 Nitril O-ring for HARDI nozzles (Between ap and Nozzle Body ). On sprayers with TeeJet or compatible systems, use Single nozzles (S) and the 3342 black cap. The same cap is used for INJET nozzles. (gasket: 242222). On all other systems, use the ISO cap delivered with your sprayer together with Single nozzles (S) or INJET s (INJET s require a special 0.4" cap). onversion table for old HARDI 41 and HARDI ISO nozzles l/min 1.4 GP 1.2 3 1.0 lows at pressure from to (1. to bar) bar HARDI 41-0. HARDI ISO 0 0 0. 24 0 04 0.4 1 0.2 0 0.0 03 1 00 01 01 02 02 2. 1. bar 2.0 1. 1.0 0. 0.0 You can use these figures to check the new HARDI ISO nozzles that may replace your old 41 nozzles.
ie ld sp r a y i n g alibration of field crop sprayers Precise and safe applications in the field demand that the sprayer is effectively calibrated. alibration must always be done with clean water and before the use of any crop protection product. ollow these three steps to calibrate your sprayer. 2 Select volume rate, nozzle and pressure 1 heck driving speed Half fill the spray tank with water. or easy selection of nozzles and pressure, use the HARDI calibration disk (order no. 221 - US or 202 - metric). Example Pressure Nozzle flow Volume rate 1 GPA Driving speed PH Nozzle ISO -04-1 0 ft ark out 0 ft note time to drive the distance. 0. GP HARDI ISO nozzles www.hardi-nozzles.com Example h mp 1 1 D D o V. e ars y t o m u a li q d iu e pray e rse S 0 0 04 02 02 0 03 0 1 0 2 0 01 1 24 1 2 0 psi 1 U 01 pa Sg 2 3 41 US gp m 3 LD in.0 LD D INJE T IN JE T LD.1 4 If actual output is not equal to desired output: Readjust pressure. (alternatively: change nozzle or driving speed) If output has increased more than % from table value: change all nozzles. 2 3 heck nozzle output.. 1.4 2. 1 1 = PH.3.2 3 1. 1 2 1. Distance driven (ft) x 0. Time (sec.) Driving speed formula 4 00-1 If it takes seconds to drive 0 ft then the spraying speed is PH. 0 0 US psi 1 1 ISO Nozzle flow If your water volume rate and spraying speed are known then use this table to identify the flow rate that will be required by the nozzle. The nozzle flow rate [GP] selected from this table, can then be used together with the nozzle tables on the following pages, to identify a suitable nozzle. PH 2 4 1 3 0.01 0.01 0.01 0.01 0.01 0.1 0.1 0.1 0.12 0.0 0.04 0.1 0. 0.13 0.12 0.1 0.2 0.23 0.2 0.04 0. 0.1 0.1 0.1 0.2 0.23 0.23 0.3 0.3 0.0 0.13 0.1 0.2 0.23 0.2 0.3 0.33 0.4 0.41 0.3 1 0.1 0.2 0.23 0.3 0.34 0.4 0.4 0. 0. 0. 0.0 0.13 0.2 0.33 0.4 0.41 0.3 0. 0.3 0.0 0.43 1.0 2 0.1 0.33 0.421 0. 0. 0.3 0. 0.42 1.0 1.1 1.34 GPA 0.2 0.4 0. 0. 0. 0.0 0.0 1.0 1.2 1.4 3 0.23 0.41 0. 0. 0.2 0.43 1.01 1.1 1.4 0.2 0.3 0.3 0.0 0.43 1.0 1.2 1.34 4 0.3 0. 0. 0.0 1.01 1.2 1.34 0.33 0.3 0.42 1.0 1.1 1.34 0.3 0.41 0.2 1.1 1.2 0.4 0.0 1.0 1.2 1.4 0.43 0. 1.04 1.313 0.41 0.43 1.1 1.4
i eld s pra y i n g alibration of field crop sprayers When calibrating, it is the perfect time to check the distribution of spray across your boom. Here you have clean water in the whole system and a great opportunity to inspect your sprayer for any leaks, blockages, etc. alibration formulas Speed check Distance (ft) 0. Time (sec.) Nozzle output Nozzle spacing (in.) GPA x PH = PH Application volume x GP (per nozzle) Nozzle spacing (in.) PH Pressure adjustment ( = GPA ) New output (GPA) 2 Known pressure () = New pressure () Known output (GPA) leaning of nozzles An even distribution across your boom is critical to the performance of the product you are applying. Dirty and/ or blocked nozzles are the most frequently reported problem affecting distribution. leaning nozzles is best done using water and a soft brush such as a toothbrush. Never use tools like screwdrivers or nails - they will certainly damage the nozzle and its ability to evenly distribute the sprayed liquid. A soft brush for nozzle cleaning is included as a part of the HARDI calibration set (1243). When did you last check the output from your nozzles? Liquid fertilizer Liquid fertilizers may be of a higher liquid density than water and almost all, normal spray solutions. The density correction table below states the increased pressure that will be needed to reach the required output with such liquids. Example The nozzle has an output of 0. GP at. If the density of the liquid fertilizer is. lbs/gal you have to multiply the calibration pressure found when checking the nozzle flow with water with the density factor. This gives an adjusted pressure of 4. The value can be found in the table at (calibrated pressure) and a density of. lbs/gal. Density (lbs/gal).00 onversion factors 1.04 = GP (per nozzle).00 1...00 1.13 1.1 Adjusted pressure.00 1. 21 22 23 23 24 31 33 34 3 3 42 44 4 4 4 2 2 2 HARDI recommends: 1. heck water volume rates after every week. 2. hange your nozzles when the water volume rate they should deliver is exceeded by % in order to ensure accuracy of distribution and drop size. Water sensitive paper An important tool to check the spray quality and deposition in the field. Buy it at your HARDI dealer. 1" x 3" pcs. no: 32
ie ld sp r a y e r HARDI ISO nozzles HARDI ISO -1 - standard lat an nozzles ISO: low, color, coding and outer dimensions Working pressure: to Recommended for TWIN sprayers SYNTAL precision molded thermoplastic ERAI extremely high durability OLOR TIPS (T) (unibody tips and caps) for safe and easy handling 0.03 0.0 0.0 0.04 0.02 0.0 314 ( pcs 34) 02-Yellow 01-Green 01-Orange SYNTAL-T 0.01 0.0 0.0 0.1 0.2 0.132 02-Lilac. 2. 4. 3. 2.0 2.4 3.1 3.4 314 ( pcs. 2).1..3..2 2. 4. SYNTAL-T 31 ( pcs. 2) ERAI-T 312 ( pcs. 3) 0. 0.1 0.1 0.1 0.14 0.1.3...0...1..4 4..2. SYNTAL-T 31 ( pcs 2) ERAI-T 313 ( pcs 3) 0.1 0.13 0.0 0.224 0.24 0.2 SYNTAL-T 0.1 0.21 0.2 0.20 0. 0.331.4.0.0.3..3... 1.1. 1.1.4 1. 13.1.2 31 ( pcs 2).....4 13. 1.2 1 GPA at PH SYNTAL-S 1. 2. 1. 1. 2.2 2. 2. 2. SYNTAL-S 2. 4.4 2. 3. 1 03-Blue 1 1.4 1. 2.0 2. 2. 1.3 1. 1. 2. 1.1 1.4 1. 1. 1. 1.0 1.2 1.4 1. 1. 1. 0. 1.1 1.2 1.4 1. 1. 31 ( pcs. 43) 1. 2. 3. 1. 2. 1. 1. 2.4 2. 1.3 1. 1. 2. 1.2 1.4 1. 1. 2.0 2.2 SYNTAL-S 31 ( pcs. 4) ERAI-S 313 ( pcs. ). 2. 4.1.4 2. 4. 3. 2.0 2.4 3.1 3.4 1. 2. SYNTAL-S 31 ( pcs 4) ERAI-S 313 ( pcs )..1..1..3. SYNTAL-S...2.0.1..3..4.2 1.4.1.0.3. 3..4.0.1.2 2. 4. 2. 4.4 314 ( pcs 2) 4..... = Spray quality: Very ine (V), ine (), edium (), oarse (), Very oarse (). 4.4.4.2...2 3. 4...0 4..2. 2. 3. 4.1 4..1 0.2 0.2 0.0 0.33 0.3 0.3. 1.4 1. 1. 21. 23....0.0. 1 1 0.23 0.34 0.0 0.44 0.40 0.2. 23. 2 2 31.4.0 1.1 1 2 2 2.2.0 1 1.0 1.0. 22... SYNTAL-T 31 ( pcs. 32) ERAI-T 31 ( pcs. 3) 0.34 0.433 0.0 0. 0. 0.1 2. 2. 3 3 3.3 1. 24. 2..3 32. 1 1.4 21.2 2 2.0 13.1 1 1.. 22. 24. SYNTAL-T 31 ( pcs 33) ERAI-T 31 ( pcs ) 0.424 0. 0.0 0.1 0.3 0.4 SYNTAL-T 0. 0.3 0.00 0.4 0.0 1.0 0. 0. 1.000 1. 1.22 1.323 2. 2. 3 3 3.3 1.0 22.0 2 2. 31.2 3 1. 1.3 2 24. 2.3 2. 3 ( pcs 34) SYNTAL-T 2.2. 3 3 43. 4.1 33. 41.2 4. 3.1.2 2. 2.0 3 3. 4 4. 2.4 2 2.4 3 3. 41. 44. 2. 2. 3 3 3.3 31 ( pcs. 3) 42.0 1.4.4 2.. 3 42. 4...0 3. 42.4 4 2.0 GPA at PH 2.3 32.2 3.1 41. 4 4 1 1 SYNTAL-S 31 ( pcs 2) ERAI-S 31 ( pcs 3)..0.3.....0.1...1..1.0 13..1.. 1 13.1.. SYNTAL-T 31 ( pcs. 31) ERAI-T 31 ( pcs. 3) 313 ( pcs 3) 04-Red 0-Brown 00-Pink SYNTAL-T 0-Grey SYNTAL-T 31 ( pcs ) ERAI-T 314 ( pcs 3) 0-White GP GP -Light blue - 2" Traditional flat fan nozzle. Recommended for all types of pesticide application where optimum coverage is demanded. This nozzle will give you excellent and uniform liquid distribution at boom " heights from " to 2" (" recommended to take care of uneven terrain or boom movements). HARDI part 4233 Nitril O-ring for HARDI nozzles (Between ap and Nozzle Body ).1..4 4..2. SYNTAL-S 31 ( pcs. ) ERAI-S 3141 ( pcs. ).3.4 1. 1.2 1..4.3. 1 1 1...0.0.4..3....1.1. 1.1.4.3 13.1.2..1. SYNTAL-S 31 ( pcs. ) ERAI-S 3142 ( pcs. )..3 1 1.4.2 21..... 1 1.1 1 1....4 13. 1.2 1...2.0.1..3..4.2 1.4.1.0.3. SYNTAL-S 31 ( pcs 1) ERAI-S 3143 ( pcs 2).0 1.1 1 2 2 2.2. 1.4 1. 1. 21. 23...0 1.2 1.1 1 SYNTAL-S 1. 22. 2 2. 3 34.. 23. 2 2 31.4 2 2. 3 3..4 4 2. 2. 3 3 3.3.0.0. 1 1..0...1...1 13..1 1 13.1 33 ( pcs 4) 1 1. 21. 24.1 2 2. SYNTAL-S...0 1.1 1 2 2 2.2.0 1 1.0 1.0. 22....3.4 1. 1.2 1. 31 ( pcs. 3) 1 23.4 2.0.2 33.1 3. 1. 24. 2..3 32. 1 1.4 21.2 2 2.0 13.1 1 1.. 22. 24. The nozzles are available both as single nozzles (S) and as OLOR TIPS (T), where the nozzle is integrated in the SNAP-IT cap...3 1 1.4.2 21.
i eld s pra y i n g HARDI ISO nozzles HARDI ISO LD-1 - Low Drift nozzles Low Drift nozzles are recommended when optimum spraying conditions cannot be achieved (risk of drift) and spraying cannot be postponed. This nozzle will give you excellent and uniform liquid distribution at boom heights from " to 2" (" recommended to take care of uneven terrain or boom movements). ISO: low, color, coding and outer dimensions Working pressure: to Restrictor designed for minimum chemical residues SYNTAL precision molded thermoplastic ERAI extremely high durability OLOR TIPS (T) (unibody tips and caps) for safe and easy handling 1 2 HARDI part 4233 Nitril O-ring for HARDI nozzles (Between ap and Nozzle Body ) 3 To ensure that the boom distribution is not disturbed by interference, the nozzles are set at an angle of to the boom. This feature is built into all HARDI OLOR TIP and SNAP-IT caps. This angle has to be set manually if single nozzles are used. " Turn-&-lean with the HARDI key easily removable restrictor. 0.01 0.0 0.0 0.1 0.2 0.132.1..3..2 2. 4. SYNTAL-T 313 ( pcs ) ERAI-T 3143 ( pcs ) 0. 0.1 0.1 0.1 0.14 0.1.3...0...1..4 4..2. SYNTAL-T 313 ( pcs ) ERAI-T 3144 ( pcs 1) 0.1 0.13 0.0 0.224 0.24 0.2 0.1 0.21 0.2 0.20 0. 0.331.4.0.0.3..3... 1.1. 1.1.4 1. 13.1.2 31 ( pcs ).....4 13. 1.2 1 GPA at PH 1 1 SYNTAL-S 3 ( pcs ) ERAI-S 3122 ( pcs 3) 2. 4.4 2. 3. 1. 2. 3. 1. 2. 1. 1. 2.4 2. 1.3 1. 1. 2. 1.2 1.4 1. 1. 2.0 2.2 GP. 2. 4.1.4 2. 4. 3. 2.0 2.4 3.1 3.4 1. 2..1..3. SYNTAL-S...2.0.1..3..4.2 1.4.1.0.3. 3..4.0.1.2 2. 4. 2. 4.4 = Spray quality: Very ine (V), ine (), edium (), oarse (), Very oarse (). 4.4.4.2...2 3. 4...0 4..2. 2. 3. 4.1 4..1 0.2 0.2 0.0 0.33 0.3 0.3. 1.4 1. 1. 21. 23....0.0. 1 1 0.23 0.34 0.0 0.44 0.40 0.2. 23. 2 2 31.4.0 1.1 1 2 2 2.2.0 1 1.0 1.0. 22. 0.34 0.433 0.0 0. 0. 0.1 2. 2. 3 3 3.3 1. 24. 2..3 32. 1 1.4 21.2 2 2.0 GPA at PH.. 13.1 1 1.. 22. 24. 1 1 SYNTAL-S 31 ( pcs. 1) ERAI-S 312 ( pcs. )..0.3.....0.1...1..1.0 13..1.. 1 13.1.. SYNTAL-T 314 ( pcs. 1) ERAI-T 31 ( pcs. 1) 31 ( pcs 32) 4..... SYNTAL-T 3141 ( pcs. ) ERAI-T 314 ( pcs. 1) SYNTAL-S 3 ( pcs ) ERAI-S 3124 ( pcs )..1. SYNTAL-T 31 ( pcs. ) ERAI-T 314 ( pcs. 1) SYNTAL-S 3 ( pcs ) ERAI-S 3123 ( pcs 4) 03-Blue 04-Red SYNTAL-T 313 ( pcs ) ERAI-T 3142 ( pcs 13) SYNTAL-T 02-Lilac 0-Brown 01-Orange 01-Green 02-Yellow - 2" GP.1..4 4..2. SYNTAL-S 3121 ( pcs. 2) ERAI-S 312 ( pcs. ).3.4 1. 1.2 1..4.3. 1 1 1...0.0.4..3....1.1. 1.1.4.3 13.1.2..1. SYNTAL-S 313 ( pcs. 1) ERAI-S 31 ( pcs. 1)..3 1 1.4.2 21..... 1 1.1 1 1....4 13. 1.2 1...2.0.1..3..4.2 1.4.1.0.3. The nozzles are available both as single nozzles (S) and as OLOR TIPS (T), where the nozzle is integrated in the SNAP-IT cap.
ie ld sp r a y i n g HARDI ISO INIDRIT HARDI ISO INIDRIT air inclusion nozzles The HARDI INIDRIT nozzle can be used for spraying at sub-optimal weather conditions, when spraying cannot be postponed. The INIDRIT nozzle will, at low pressures, reduce drift to a minimum. HARDI part 4233 Nitril O-ring for HARDI nozzles (Between ap and Nozzle Body ). Spray liquid Air inclusion nozzle Working pressure: to ISO flow, colors, sizes and nomenclature Application rates from to GPA (at mph) SYNTAL precision moulded thermoplastic Two big air inlets reduce the risk of clogging. Air ompact design reduces impact damage. This nozzle will give you excellent and uniform liquid distribution at boom heights from 1" to 3". eets full ISO specifications. The droplet spectrum is medium to very coarse; safe for drift control but without risking poor coverage and deposition on leaves. The venturi can easily be removed for cleaning the nozzle. 0. 0.1 0.1 0.1 0.14 0.1 02-Yellow 0.1 0.13 0.0 0.224 0.24 0.2.3...0.. 02-Lilac 0.1 0.21 0.2 0.20 0. 0.331 GPA at PH.1..4 4..2..4.0.0.3..3... 1.1. 1.1.4 1. 13.1.2.....4 13. 1.2 1 1 1 GP. 2. 4.1.4 2. 4. 3. 2.0 2.4 3.1 3.4 1. 2...1..1..3. 3..4.0.1.2 2. 4. 2. 4.4 4..... = Spray quality: Very ine (V), ine (), edium (), oarse (), Very oarse (). 4.4.4.2...2 3. 4...0 4..2. 2. 3. 4.1 4..1 0.2 0.2 0.0 0.33 0.3 0.3 0.23 0.34 0.0 0.44 0.40 0.2 0.34 0.433 0.0 0. 0. 0.1 GPA at PH. 1.4 1. 1. 21. 23....0.0. 1 1. 23. 2 2 31.4.0 1.1 1 2 2 2.2.0 1 1.0 1.0. 22... 2. 2. 3 3 3.3 1. 24. 2..3 32. 1 1.4 21.2 2 2.0 13.1 1 1.. 22. 24. 1 1.1..4 4..2. SYNTAL-S 32 ( pcs. 20).3.4 1. 1.2 1. 32 ( pcs. 30) SYNTAL-S 321 ( pcs.20)..0.3.....0.1...1..1.0 13..1.. 1 13.1.. 32 ( pcs. 30) SYNTAL-T 324 ( pcs. ) SYNTAL-T SYNTAL-S 323 ( pcs. 20)...2.0.1..3..4.2 1.4.1.0.3. SYNTAL-T SYNTAL-S 321 ( pcs. 20) 323 ( pcs. 30) SYNTAL-S 321 ( pcs. 20) 322 ( pcs. ) SYNTAL-T 321 ( pcs. 30) SYNTAL-T 03-Blue 01-Green SYNTAL-T 04-Red 0-Brown GP.4.3. 1 1 1...0.0.4..3....1.1. 1.1.4.3 13.1.2..1. SYNTAL-S 32 ( pcs. 20)..3 1 1.4.2 21..... 1 1.1 1 1....4 13. 1.2 1...2.0.1..3..4.2 1.4.1.0.3. The nozzles are available both as single nozzles (S) and as OLOR TIPS (T), where the nozzle is integrated in the SNAP-IT cap.
i eld s pra y i n g HARDI ISO nozzles HARDI INJET Air inclusion nozzles The HARDI INJET nozzles can be used for spraying at sub-optimal weather conditions, or when spraying cannot be postponed. The HARDI INJET nozzles are recommended for most pesticide applications where reduced risk of drift is demanded. Air inclusion nozzles with greater drift reduction ISO: low, colors and coding Application rates from 3 to GPA (at PH) Pressure range: 1 B-Jet border nozzle for precise application near sensitive areas Liquid HARDI B-JET makes a half spray swath turn the TRIPLET to the B-JET when spraying next to sensitive areas. " Air B-JET " INJET 02 1 INJET GP 0.2 0. 0.331 0 0.34 0 0.3 1 0.433 1 03-Blue 1.0...2.0..3 4.. 4.4.2. 3..1 2. 3. 3. 2. 2. 3.4 1. 2. 2. 2. 1. 2.0 2.2 2. 2......4...0.1..1 1.4..0.....0.. 313 ( pcs. ). 1 1. 1....1 13.1.0 1. 1.1 2 2..4 1.2 1 1...3.0.. 1.0 1 1.4.3.4.3 13.1 1 1 4.1.4..0 4.. 3.4 4.4 4. 2. SYNTAL-S B-JET 31...4.1.3.2...0..3.4 13.4..4.4 1..4.3 314 ( pcs. ) 0.0 0.3 0.3 0 0.424 0 0.44 1 0. 0.0 0.40 0.2 0 0. 0 0.32 1 0.3 SYNTAL-S 312 ( pcs. ) GPA at PH 1. 21. 23. 2.2 2.2. 2 2.. 1 1.0.1 22.0.1 13. 1 1. 1. 1.3.4.1...4.0...2.0..3 4.. 4.4.2. = Spray quality: Very ine (V), ine (), edium (), oarse (), Very oarse ()..0..4.2 0.0 0.3 0.4 0 0.4 0 0.4 1 1.03 4.1.1..1 0.00 0.0 1.0 0 1.131 0 1.2 1 1.3 1.0. 22. 2 2. 2.4 2 2. 1 1..1 13.1.0 1. 1.1.....1 1.4.1....4...0 1..1.0..0.....0.. SYNTAL-S B-JET 3 1 1.2 1. 1.. 22.. 1 1. 1... 1.3 1 1.1 1...1 13.1.0 1. 1.1..4.1.2..0..3 13.4..4 1..4 2. 3 3.3 42.0 1.4 24..3 32. 3 3 42. 21.2 2.0.0 3 3. 1. 22. 24. 2.3 2.3 32.2 1.2 21. 2 2 2. 2 2. 1 1 1. 1 21.3 23.4.4 1.2 1 1.. 1.0 1 1.4.3.4.3 13.1 1 1.1.. 1.3 1. 21. 23. 2.2 2.2. 1.2 1 22. 2 2 2.. 1 1.0.1 22.0.1 13. 1 1. 1. 1.3..1 13.1.0 1. 1.1 23. 2 31.4 33. 3. 41.2 21. 2 2.. 3 3 1 2 2.2 2.0 31.3 3 1.0. 22. 2 2. 2.4 2 2. 1 1.2 1. 1.. 22. 312 (1 pcs. 000) SYNTAL-S 4...3.0 1 2 2.2 2.0 31.3 3 312 ( pcs. 00) SYNTAL-S SYNTAL-S B-JET 31..2.1....2.... 1...3... 0.0 0. 0.1 0 0. 0 0.1 1 0. 23. 2 31.4 33. 3. 41.2 SYNTAL-S B-JET 31 SYNTAL-S 31 ( pcs. 100) 0-Brown 01-Green 02-Yellow 02-Lilac SYNTAL-S 04-Red..3..4.4.3 SYNTAL-S 0.0 0.24 0.2 0 0.23 0 0.31 1 0.34 312 ( pcs. 00) SYNTAL-S 0.1 0.14 0.1 0 0.2 0 0.23 1 0.2 GPA at PH 0-Grey 0.0 0.2 0.132 0 0.1 0 0.1 1 0.13 SYNTAL-S 31 ( pcs. 100) 0-White 01-Orange SYNTAL-S GP B-JET 03 The INJET and B-JET nozzles are molded from SYNTAL (thermoplastic), using the latest computer technology for precision and durability. The HARDI INJET & B-JET nozzles can be mounted using the black 333 ISO/INJET cap. HARDI part 4233 Nitril O-ring for HARDI nozzles (Between ap and Nozzle Body ) B- JET HARDI 3 43. 4.1.4 1. 2. 3 3.3 42.0 1.4 2 31.2 3 3.0.3 44.1 2 2.3 2. 31. 3.2 3. 1 2 2.2 2.0 31.3 3 312 ( pcs. 0) 4..2 2..2.1 3. 4. 2.4.0 2.. 3 41. 44.. 2. 3 3.3 42.0 1.4 2 3 34. 3.3 41. 4. The nozzles are available as single nozzles (S). 13
ield sp r ay i ng HARDI ISO nozzles HARDI ISO -0 lat an nozzles This nozzle has an 0 spray angle. On boom sizes from 0 ft to 1 ft the boom height is often higher than " above the target. 0 nozzles provide good coverage with reduced risk of drift at higher boom heights and are also adaptable to band spraying. ISO: low, color, coding and outer dimensions 0 spray angle Working pressure: to SYNTAL precision molded thermoplastic ERAI - extremely high durability OLOR TIPS (T) (unibody tips and caps) for safe and easy handling The 0 nozzles can be fitted on HARDI sprayers using the black 333 ISO/INJET cap. HARDI part 4233 Nitril O-ring for HARDI nozzles (Between ap and Nozzle Body ) " " The 0 nozzle is suitable for big booms or row crop / band spraying with either low boom or nozzles at droplegs. or use in cotton, sugar cane, sugar beets etc. GPA at PH 01-Green 01-Orange SYNTAL-S 0.01 0.0 0.0 0.1 0.2 0.132.1..3..2 2. 4. ERAI-T 31 ( pcs. 2) 0. 0.1 0.1 0.1 0.14 0.1.3...0...1..4 4..2. 2. 4.4 2. 3. 1 GP 1 3131 ( pcs. ) 1. 2. 3. 1. 2. 1. 1. 2.4 2. 1.3 1. 1. 2. 1.2 1.4 1. 1. 2.0 2.2 02-Yellow SYNTAL-S 3132 ( pcs. 41) ERAI-S 310 ( pcs. ). 2. 4.1.4 = Spray quality: Very ine (V), ine (), edium (), oarse (), Very oarse (). 2. 4. 3. 2.0 2.4 3.1 3.4 1. 2. ERAI-T 3121 ( pcs. 3) 0.1 0.13 0.0 0.224 0.24 0.2.4.0.0.3..3... 1.1. 1.1.4 1. 13.1.2 ERAI-T 3122 ( pcs. 4) 03-Blue GP 0.2 0.2 0.0 0.33 0.3 0.3. 1.4 1. 1. 21. 23....0.0. 1 1 GPA at PH 1 1 SYNTAL-S 3133 ( pcs. 42) ERAI-S 310 ( pcs. )..1..1..3. 3..4.0.1.2 2. 4. 2. 4.4 SYNTAL-S 3134 ( pcs. 43) ERAI-S 310 ( pcs. )..0.3.....0.1...1..1.0 13..1.. 1 13.1...1..4 4..2. The nozzles are available both as single nozzles (S) and as OLOR TIPS (T), where the nozzle is integrated in the SNAP-IT cap.
i eld s pra y i n g Liquid fertilizer QUINTASTREA - -hole liquid fertilizer nozzle The unique design of the HARDI QUINTASTREA ensures precise application of liquid fertilizer. ive [] streams of liquid are distributed at different angles and flows by each Quintastream nozzle. Highest flow is from the middle stream and lowest in the outer, overlapping streams. Uniquely, this - patent pending - system allows for boom movements that do not influence distribution. Boom heights of " can be used as safely as 3"; a height that may be more appropriate for the increasingly popular wider booms. solid streams that minimize crop scorching ERAI restrictor for high durability Optimal distribution independent of boom height HARDI SNAP IT for safe and easy handling ISO: flow, colors, coding and outer dimensions for easy calibration Turn and lean key for restrictor removal OLOR TIPS (T) (unibody tips and caps) for safe and easy handling 0.1 0.13 0.0 0.224 0.24 0.2 03-Blue SYNTAL-T 0.2 0.2 0.0 0.33 0.3 0.3 04-Red SYNTAL-T 0.23 0.34 0.0 0.44 0.40 0.2 0-Brown SYNTAL-T 0.34 0.433 0.0 0. 0. 0.1 GPA at PH 3 ( pcs. 00).3...0...1..4 4..2..4.0.0.3..3... 1.1. 1.1.4 1. 13.1.2. 1.4 1. 1. 21. 23....0.0. 1 1. 23. 2 2 31.4.0 1.1 1 2 2 2.2.0 1 1.0 1.0. 22... 1. 24. 2..3 32. 1 1.4 21.2 2 2.0 13.1 1 1.. 22. 24. 1 2. 4.1.4 2. 4. 3. 2.0 2.4 3.1 3.4 1. 2. GP SYNTAL-T.1..3. 3..4.0.1.2 2. 4. 2. 4.4.1..4 4..2. SYNTAL-S 3 ( pcs. 0).4.3. 1 1 1...0.0.4..3....1.1. 1.1.4.3 13.1.2..1. SYNTAL-S 3 ( pcs. 0)..3 1 1.4.2 21..... 1 1.1 1 1....4 13. 1.2 1...2.0.1..3..4.2 1.4.1.0.3. 0.424 0. 0.0 0.1 0.3 0.4 SYNTAL-T SYNTAL-S 34 ( pcs. 0).3.4 1. 1.2 1. 31 ( pcs. 00) 2. 2. 3 3 3.3...0.3.....0.1...1..1.0 13..1.. 1 13.1.. 3 ( pcs. 00) 1 SYNTAL-S 31 ( pcs. 0)..1. 313 ( pcs. 00) SYNTAL-S 32 ( pcs. 0) 3 ( pcs. 00) 0-Grey 02-Yellow SYNTAL-T 0-White 0. 0.1 0.1 0.1 0.14 0.1 -Light blue 1-Light green 01-Green SYNTAL-T " - 3 " GP HARDI part 4233 Nitril O-ring for HARDI nozzles (Between ap and Nozzle Body ) 0. 0.3 0.00 0.4 0.0 1.0 SYNTAL-T 0. 0. 1.000 1. 1.22 1.323 GPA at PH 31 ( pcs. 00) 2.2. 3 3 43. 4.1 2. 2. 3 3 3.3 1.0 22.0 2 2. 31.2 3 1. 1.3 2 24. 2.3 2. 33. 41.2 4. 3.1.2 2. 2.0 3 3. 4 4. 2.4 2 2.4 3 3. 41. 44. 2. 2. 3 3 3.3 42.0 1.4.4 2.. 3 42. 4...0 3. 42.4 4 2.0 2.3 32.2 3.1 41. 4 4 31 ( pcs. 000).2.. 1.01 1.2 1.0 1. 1.3 1.4 2. 0..2 NOTE: Remember to adjust the pressure according to the density of the liquid fertilizer. See page. 4.1 3. 1.2.0 3.4 4.2..2 1. 1.4 1. 1. 21. 23...0 1.2 1.1 1...0.0. 1 1..0...1...1 13..1 1 13.1. 23. 2 2 31.4 1 1. 21. 24.1 2 2..0 1.1 1 2 2 2.2.0 1 1.0 1.0. 22....3.4 1. 1.2 1. SYNTAL-S 3 ( pcs. 00) 2 2. 3 3..4 4 SYNTAL-T 1 SYNTAL-S 3 ( pcs. 00) 1. 22. 2 2. 3 34. 31 ( pcs. 000) SYNTAL-S 3 ( pcs. 0).0 1.1 1 2 2 2.2 31 ( pcs. 00) 2. 2. 3 3 3.3 1 23.4 2.0.2 33.1 3. 1. 24. 2..3 32. 1 1.4 21.2 2 2.0 13.1 1 1.. 22. 24...3 1 1.4.2 21. SYNTAL-S 3 ( pcs. 0000) 3 42. 4.. 31. 3. 44. 4 4.. 2. 3.1. 4 4. 3. 2.3 32.2 3.1 41. 4 4 22. 2. 31. 3 3.0 4 1. 24.1 2. 31.1 34.1 3. 1. 24. 2..3 32. 1
ie ld sp r a y i n g Liquid fertilizer 13 Solid stream nozzle HARDI 13 one nozzles are used without swirl plates for solid stream (with swirl plates for hollow cone and full cone spraying - please see page 1). Use the solid stream for liquid fertilizer on boom sprayers. or application of liquid fertilizer at " nozzle spacing, with a minimum risk of scorching low rates from 0.0 to.2 GP (at 1 3 ) SYNTAL precision molded thermoplastic: precise, resistant and durable 1 0 1 2 3 13-0.0 0.0 0. 0.1 0.1 0.1 0.243 0.24 0.3-0. 0.133 0.13 0.2 0.24 0.22 0.34 0.441 0.4-0. 0.1 0.241 0.3 0.3 0.41 0. 0.4 0.3-0.224 0.2 0.31 0. 0.44 0.4 0. 0. 1.0-1 0. 0.32 0.431 0. 0. 0.4 0.4 1.1 1.44 GP -1 0.3 0.423 0.1 0. 0.2 0. 1.1 1.4 1. - 0.4 0. 0.2 0.3 1.0 1.1 1.4 1.3-22 0. 0. 0.31 1.03 1.2 1.43 1. 2.2-24 0.2 0. 0.4 1.24 1.43 1. 1-1.04 1. 1.40 1. 2.21 2.4 0. -3 1.3 1.0 1. 2. 2.3 4 2.. - 1. 1.4 1 3.4 4.134 3 3.2 1 2 31 42 3 4 31 31 33 pcs. 2 31 32 4 3 3 2 Large drop flat spray nozzle HARDI foam nozzles are excellent for application of liquid fertilizers. hoose foam nozzles for broad leaf application - the large air inclusion bubbles will be reflected on the leaves and minimize crop damage. The nozzle is used in combination with the 13 Solid Stream nozzle. GP Spray angle up to 1 Extremely coarse droplet spectrum Superior distribution an work at nozzle spacing up to " GPA at PH " 1 1 1...1....2.2......2.0.0.2. 1.3.2.2. 1.2 1 1.1.4 4..4... 4...1 Large drop flat spray nozzle (3) + 13- Grey (42) 2 0.22 0.23 0.321 0.3 0.4 0.40 1 1 1.0 22.0 24. 2 1 1 1. 1. 2.1.4 13. 1. 1..... 1 1.4 0.3 0.0 0.43 0. 0. 0. 21.3 23. 2.0.1 33. 3 1. 1 21. 2.0 3 1.2 1.0 1. 21. 2 2.4 1 1.3 1. 24.. 1 1 1. 1. 2.. 1 1 1.... 1 1 1.1 1 0.42 0.40 0.2 0. 0. 0.03 2 2. 31.2 3.3 4. 21.3 23. 2.0.1 33. 3.4 2 2. 2. 34.1 1. 1. 1. 22. 2.2 2 1 1. 1.0 22.4 2 1.3 1 1.0.2 2. 1 1 1 1 21... 1 1 1. GPA at PH 1 1 2 0. 0.4 0. 0.1 0. 1.0 3 3 41. 4.4 4.1 2. 31. 3.4 4.1 3.4 2 2.0 34. 3. 4. 2 2.2.3 33..0 1.0 21.3 2 2..1 3 1.1 1 2 32.0 1 1 1 22.0 24. 2.3 1.0 1..2 22. 2..2 1 1 1.3 1.3 22...0 13.1 1.1 1..0... 1 1 1. 1 1 1.. 2 2 1.3 1. 1.1.3 2.4..0 1 1.0 21.3 1.1 1 2 32.0 1 1 21.2 2 2.0 1 1.3 1. 21.1 24. Large drop flat spray nozzle (3) + 13-22 Grey ().......3.1.2...4.4.0.0..3 1.4.1 Large drop flat spray nozzle (3) + 13-1 Grey (4) 2 GP Large drop flat spray nozzle (3) + 13- Grey () Large drop flat spray nozzle (3) + 13-1 Grey (3) 2 2 0.1 0.2 0.4 0. 1.02 1.22 41.0 4..2.0 4.. 3 3.2 41. 4.4 4.1 2.3 3 3. 41.4 4. 2 2. 31.4 3.3. 2 2 2. 32.2 3.0 42.. 22. 2.0 32.4 3.4 1.. 2 2 2. 34. 1.1 1. 2 2.0 32.0 Large drop flat spray nozzle (3) + 13-24 Grey ().0.1.2...2...3.0.4..2 1.0 1 2 0.0 0.02 0. 1.1 1.2 1. 4. 3......0 4 4. NOTE: Remember to adjust the pressure according to the density of the liquid fertilizer. See page. 3 3 41. 4.4 4.1 4.1.0 3 3. 42.4 4 2 2 32. 3. 4 4 2 2. 2.4 3 3. 44. 21. 24.4 2.. 3..0 2 2 2 31. 3
V i n e ya r d a n d or c h a r d s pra y i n g alibration of mistblowers 1 alibration of forward speed See page : alibration of field sprayers (note that the tractor PTO should be rpm, which will allow the blower to operate at its maximum capacity) 2 alculation of nozzle size and pressure After determining your forward speed and choosing your application rate according to the recommendations on the chemical container, the total nozzle capacity can be calculated with the following formula (based on driving in each row): Row spacing: Application rate: orward speed: 1 ft x GPA x 3 PH 4 ) New output (GP) 2 Known pressure () = New pressure () Known output (GP) Example ( 0.44 GP 0.4 GP ) 2 1 = % 1 ft GPA 3 PH = GP The total nozzle capacity is GP. This amount has to be divided between all the nozzles on the mistblower. Two examples are described in the following: a Nozzle calibration when equal output from each nozzle is desired ( b Nozzle calibration when nozzle output must be adapted to the crop Row spacing (ft) x GPA x PH = total GP 4 Example ing the water into the jug, using a hose. If exactly 0.44 GP is desired, the pressure can be adjusted with the pressure adjustment formula: The drawing shows nozzles pointing to each side. We can % use the same example as in a), with a row % spacing of 1 ft, forward speed of 3 PH and desired application rate of GPA. % % % In this case nozzles 1 and are shut off 2 and 3 apply % = 0.44 GP (each nozzle applies 0.22 GP) 4 and apply % = 1.0 GP (each nozzle applies 0.4 GP) and apply % = 0. GP (each nozzle applies 0.33 GP) % % % % % % hosen from the flow table on page 1 giving the following combination at 1 : rom the drawing % % you can see that, % % because the foliage to be sprayed is evenly distributed, the output from each of the nozzles is the same. This is calculated as follows: Nozzle 2 and 3: - orange (0.24 GP) Nozzle 4 and : -1 green (0. GP) Nozzle and : - yellow (0.32 GP) These do not correspond exactly with the desired, as the total capacity would be GP instead of GP. The correct pressure can be calculated with the pressure correction formula at 1. Total GP = capacity of single nozzle in GP Number of nozzles ( GP GP ) 2 1 = 1 Example GP nozzles = 0.44 GP In the nozzle chart you will find the nozzle closest to the desired output at a suitable pressure Red nozzle at 1 has a capacity of 0.4 GP. We recommend that you double-check the nozzle output with a measuring jug (with clean water in the sprayer). You can do this by disconnecting the blower and direct- Use the HARDI calibration disk (order No: 24) for easy nozzle selection and calibration. 1
V ineya r d a nd o r c har d sp r a yi n g eramic hollow cone nozzles HARDI Hollow cone nozzles These nozzles are superior in fine droplet delivery for optimal coverage of plant protection compounds. The high durability of the ceramic material makes this nozzle extensively used in vineyard and orchard mistblower applications at high working pressure or when applying abrasive materials. High efficiency nozzles Best choice for vineyard and orchard applications Useful on droplegs for under leaf spraying where turbulow rates from 0.0 to 1. GP (at 2 ) lence is required for good coverage. Also used on handworking pressure from - 2 held sprayers for insecticide and fungicide application ERAI superior durability at high working pressure and for band spraying. GP GP GP -0 White 31 V V 0 V 1 V 1 V 2 V 0.04 0.0 0.0 0.00 0.0 0. - Yellow 31 V 0 V 1 V 1 V 2 V 0.1 0.12 0.4 0.233 0.2 0. -1 Grey 312 0 1 1 V 2 V 0.1 0.30 0.43 0.0 0.3 0. -0 Lilac 31 V V 0 V 1 V 1 V 2 V 0.02 0.03 0.4 0. 0. 0.1 - Orange 31 V 0 V 1 V 1 V 2 V 0.1 0.243 0.23 0.3 0.334 0.4-1 Green 33 0 1 1 V 2 V 0.33 0.4 0. 0.4 0.2 0.2 0.04 0.1 0.13 0.1 0.1 0. -1 Red 31 0 1 V 1 V 2 V 0.24 0.3 0.3 0.4 0.4 0.1-1 Black 313 0 1 1 2 V - Brown 31 V V 0 V 1 V 1 V 2 V GP - Blue 31 0 1 1 2 0.2 0. 0.4 0. 0.1 0.1 0.1 0. 0.2 0. 0.22 1.13 = Spray quality: Very ine (V), ine (), edium (), oarse (), Very oarse (). Solid stream nozzle - ERAI This nozzle disperses the spray liquid in a concentrated stream. Its main use is calibration of flows, often in connection with other nozzle components. - - The capacity can be changed by placing the nozzle with or against the direction of flow. - -1 1 0 1 0 0 4 0 No -1 - -23-0.3 1.2 1. 1.4 2. 2. 3.1 4 1.0 1. 2.00 2.4 3.4 1.3 2.2 3. 2..2.24 GP 0.1 0.22 0.2 0.31 0.3 0.43 0.2 0.3 0. 0.1 0.21 0.2 0. 0.3 0.44 0.4 31 0.2 0.3 0.42 0.1 0. 0. 0.3 1.02 0.1 0.2 0.31 0.3 0.44 0.4 0. 0.1 313 0.31 0.4 0. 0. 0. 0. 1.1 1.43 0.2 0.3 0.4 0. 0.4 0. 0. 1.1 313 0.1 0. 0. 1.0 1.23 1.4 1. 0.3 0. 0. 0. 0. 1.1 1.4 1.1 313 0. 1.0 1.2 1.3 1. 2. 1 0.3 0.1 0. 1.1 1.3 1. 2.0 2. 31313 0. 1.02 1.22 1. 1.4 2. 2.3 313 0. 1.31 1. 1.1 2.21 2. 1 4.13 3131 1.3 2. 3.2.1. 314
Sp ec i a l n oz z les 13 cone nozzle HARDI 13 one nozzles are used with one of the four available swirl plates for hollow cone and full cone spraying. The hollow cone nozzle can be used for pesticide application on boom sprayers, mistblowers or knapsack sprayers. The HARDI 13 cone nozzle can also be used without swirl plates for solid stream application (see page 1). 13 - Drop sizes The difference between the 4 swirl plates is the droplet size. The blue swirl plate has a very fine (V) droplet spectrum, the grey a fine () droplet spectrum and the black swirl plate has a medium () droplet spectrum. The white swirl plate has a medium () droplet spectrum and is giving a full cone spray. Large drop adaptor A large drop adaptor (3) is available for the grey swirl plate. This adaptor changes the droplet spectrum to very large (VL) droplets. 3 0 1 1 No 0.0 0.0 0.0 0.0 0.0 0.0 0. 0. 0.13 3423 Box of pcs. 34203 1 pc. 0.0 0.0 0.0 0. 0. 0. 0.13 0.1 0.1-0.0 0. 0. 0. 0.13 0. 0.1 0.1 0. - 0. 0. 0. 0.13 0.1 0.1 0.1 0.21 0.23-1 -1 - -22-24 - -3-0. 0.13 0. 0.1 0.1 0.1 0.21 0.24 0.2 GP 0.13 0. 0. 0.1 0.1 0.1 0.1 0.1 0.1 0. 0. 0.22 0.23 0.2 0.2 0.2 0.2 0.32 0.1 0.1 0.1 0. 0.22 0.23 0.2 0.31 0.34 0.1 0.1 0.1 0.21 0.23 0.2 0.2 0.33 0.3 0.1 0.21 0.22 0.2 0.2 0.2 0.33 0.3 0.43 0.21 0.22 0.24 0.2 0.2 0.32 0.3 0.42 0.4 0.23 0.2 0.2 0. 0.33 0.3 0. 0.4 0.2 31 pcs. 12 1 2 31 42 3 4 31 31 33 pcs. 2 31 32 4 3 3 2 13-3 0 1 1 0. 0. 0. 0. 0.1 0.1 0.1 0.21 0.24-0.13 0.1 0.1 0.1 0.1 0.21 0.23 0.2 0. - 0.1 0.1 0. 0.23 0.2 0.2 0.31 0.3 0.3-0.22 0.23 0.2 0.2 0. 0.33 0.3 0.43 0.4-1 -1 - -22-24 - -3-0.2 0.2 0. 0.33 0.3 0.3 0.4 0.2 0. GP 0. 0.34 0.32 0.3 0.34 0.3 0.3 0.44 0.42 0.4 0.4 0.2 0.1 0. 0. 0. 0. 0. 0.3 0.41 0.43 0.4 0.3 0. 0. 0. 0.4 0.41 0.44 0.4 0.3 0. 0.3 0.1 0.2 0.2 0.2 0. 0.1 0. 0.4 0.0 0.1 1.0 1.1 0. 0. 0. 0. 0. 0.2 1.04 1. 1.3 0. 0.3 0. 0. 0. 1.03 1.1 1.3 1.1 1 2 31 42 3 4 31 31 33 pcs. 2 31 32 4 3 3 2 13-3 0 1 1 0. 0. 0. 0. 0.1 0.1 0.1 0.21 0.23-0. 0.1 0.1 0.1 0. 0.21 0.24 0.2 0.31-0.1 0. 0.22 0.24 0.2 0.2 0.33 0.3 0.42-0.23 0.2 0.2 0. 0.33 0.3 0. 0.4 0.2-1 -1 - -22-24 - -3-0.2 0.31 0.33 0.3 0. 0.43 0.4 0. 0.4 GP 0.33 0.3 0.3 0. 0.3 0.43 0.42 0.4 0.4 0.3 0. 0. 0. 0. 0. 0. 0.3 0.3 0.42 0.4 0.4 0.4 0. 0.4 0.2 0.3 0.3 0.4 0.1 0.4 0.1 0. 0.2 0.1 0.4 1.0 0. 0. 0. 0. 0. 0.2 1.04 1. 1.3 0. 0.4 0. 0. 0. 1.0 1.1 1.3 1.3 0. 0.4 0. 1.00 1. 1.1 1.34 1. 1.3 1 2 31 42 3 4 31 31 33 pcs. 2 31 32 4 3 3 2 13 - Drop Nozzle: - 3 0 1 1 0. 0. 0.13 0. 0.1 0.1 0.1 0.22 0.2 - - - -1-1 - GP -22-24 - 0.1 0.1 0.1 0.22 0.24 0.2 0.2 0.33 0.3 0.2 0.2 0.2 0.33 0.3 0.3 0.44 0.1 0. 0.33 0.3 0.3 0.43 0.4 0.1 0. 0. 0.4 0.44 0.4 0.1 0. 0.3 0. 0. 0. 0. 0.2 0. 0. 0. 0.4 0.0 0.0 1.04 1.1 0.4 0.0 0. 0. 1.0 1.13 1.2 1.4 1. 0.3 0.0 0. 1.0 1.1 1.2 1.44 1. 1. 0.2 0. 1.0 1.1 1. 1. 1. 1.4 2.0 0. 0.4 0.0 0. 0. 1.0 1.1 1.3 1.4 1 2 31 42 3 4 31 pcs. 2 31 32 4 3 3 2 3134 pcs. 1 3 pcs. 1 31 pcs. 1 1
H a n d op er at e d s p r ay i ng alibration of hand operated sprayers To ensure precise and safe applications in the field, effective calibration is essential. alibration must always be done with clean water and before the use of any crop protection product. ollow this guide to calibrate your hand sprayer. 1 Add clean water, to the clean sprayer. 2 heck that sprayer operates correctly and safely. 3 Use correct nozzle height and measure swath width. Example: " 4 Practice spraying at comfortable walking speed and with correct nozzle height. To find application rate (GPA), multiply the amount of spray missing in the tank by 43.. (easure when refilling). ill up with clean water. Spray 00 sq.ft. Swath width inch 2 4 Spraying distance ft. 0 444 0 2 1 Example: 1 acre = 43. x 00 sq.ft. If 0.3 gal were used to spray 00 sq.ft. then you are applying: 0.3 x 43. = 13 GPA. " 0 ft.
Ha n d op e r a t e d s pra y i n g Nozzles for hand operated sprayers H Hollow cone nozzle SYNTAL Hollow cone nozzle for knapsack sprayers low from 0. to 0.0 GP (at - ) SYNTAL This nozzle is special designed for knapsack sprayers. The restrictor and the nozzles are fixed together to avoid losing parts when taken apart for cleaning. Yellow Red Brown Grey 0.322 0.3 0.3 0.4 0. 0.3 31 0.4 0.41 0.2 0. 0.0 0.04 31 GP 2 0.3 0.1 0.1 0.3 0.22 0.2 314 0.21 0.20 0. 0.3 0.3 0.4 312 HARDI RELEX nozzle SYNTAL " Spray width from " to 0" Even distribution across the swath GPA at 1 The figure shows the spray width for the 4 different sizes of HARDI RELEX nozzles " " These nozzles are designed so the application volume is the same for all sizes at 1 and a normal walking speed (2.2mph), only the spray width changes. " " " " 0" Yellow 1 Green Blue Red 0.4 322 0.4 323 GP 0.1 3 0.32 321 Adjustable nozzle - SYNTAL Adjustable by turning the tip rom solid stream to hollow cone Available with 1 thread These nozzles can be used on knapsack sprayers or spray guns, where you want to change the characteristics of the spray cone and the demands for precision is less important. 3 GP 0,1 0,1 0,23 0,2 0,2 0,33 0,3 0,44 0,4 0, Spray angle 0 0 0 21
Ba nd sp r a y i n g Band spraying In many crops, band spraying provides an efficient way of reducing chemical consumption. HARDI produces both conventional and air assisted special sprayers for row crops. ALIBRATION OR BAND SPRAYING 1 orward speed See page alibration of field sprayers Row spacing 2 GPA in band Label recommendations usually state total GPA rates, also called broadcast rates. When band spraying we only want to apply this broadcast rate in the bands, so instead we will here call it: GPA in band. 3 alculation of nozzle capacity GPA in band x band width (inch) x PH Band width If the row spacing is "; band width "; field acres; and GPA in band = GPA the total required volume will be: x x = GP per band If GPA is to be applied at 3 PH in a " wide band, the necessary output will be: 0.1 GP/per band. If, for instance, 1 nozzle per band is used, every nozzle should apply 0.1 GP. Nozzles and pressures can then be found in the relevant tables. 4 alculation of total required volume of spray mix area of field (acre) x GP in band x band width (inch) = spray mix (total gal/field) row spacing (inch) =. gallons alculation of chemical per tank gallons of water in tank x chemical dose desired (GPA) = gallons of chemical per tank GPA in band If the tank holds 0 gallons and 2 gallons of chemical products are required per acre when GPA in band is applied, the following calculation should be used: 0 x 2 = gallons of chemical product per tank Even spray nozzle HARDI 40E 0 Even spray nozzle SYNTAL. Even distribution is ideal for band spraying Use the 40E on hand operated sprayers, when only one nozzle is used Application range: 0.0 to 1.44 GP Pressure range Because of the even spray distribution from this nozzle, it is especially well suited for row and inter-row spraying. It is used on hand operated sprayers or on a spray boom where chemicals need to be applied over a narrow area. 40E -E 22 2 -E -E -13E -1E -21E -2E -2E 0-3E GP 0.0 0.0 0. 0.1 0.21 0.31 0.3 0.4 0. 0.0 0.0 0. 0.1 0.23 0.3 0.43 0.3 0. 0.0 0.0 0.13 0.1 0.2 0.3 0.4 0. 0.4 0.0 0. 0.1 0.22 0.2 0.44 0.4 0. 1.0 0.0 0. 0.1 0.24 0.33 0.4 0.1 0.4 1.22 0. 0. 0. 0.2 0.3 0. 0.2 0. 1.44 31 31 31 31 310 3 312 313 31 The spray width can be changed by angling the nozzle
Sp ec i a l n oz z les End nozzles Off center SYNTAL spray nozzle. These nozzle types give an asymmetric spray pattern and disperse the product at a certain distance from the nozzle. If fitted to the end of a boom they give extra spray width. They are ideal for applications such as fence line spraying. These nozzles can also be fitted on the frame of the spray tank when not using a boom for under tree spraying in vineyards and orchards. 1 End nozzle 3/" SYNTAL Example of spraying width at This nozzle is mounted on the end of the boom tube using the 0 mounting kit. 1 4 0 Off center spray nozzle 3/" Pressure range: to 0 Spray width up to 13" SYNTAL precision molded thermoplastic 4 H B 1 W G-1 G-0 G-2 G-0 inch 1 W B H 1 G-1 G-0 G-2 0.3 0.44 0.1 0. 0.3 33 GP 0.34 0.2 0. 0. 0. 1.1 1.002 1.22 1.0 1.32 331 332 0.224 0.24 0.31 0.34 0.3 33 1 G-0 G-3 G-0 13 G-3 1. 1.40 1. 1. 2.04 33 Off center spray nozzle 1/2" Pressure range: to 0 Spray width up to " SYNTAL precision molded thermoplastic This nozzle is mounted on the end of the boom tube using the 230 mounting kit. Example of spraying width at 1 End nozzle 1/2" SYNTAL H B 1 G-0 W B H G-0 1 1. 2.03 2.33 4 34 4 0 W G-0 G-0 inch 1 1 1 4 G-0 G-0 G-00 G-0 G-00 4 3.4 2 4.32 344 32 1 13.2.2 341 GP 2.0 2. 2.3 13 3.2 342 2.41 2.1 3.41 3.23 4.1 343 G - Giant end nozzle SYNTAL G- Blue 24 4.032 31 GP 2.4.03 31 1 43.03..33 31 G ft 0 3 00 1 G- G- White 00 G- G-00 Red This nozzle is mounted on the end of the boom using a special mounting kit ask your HARDI dealer. 00 Off center spray nozzle Pressure range: to Spray width up to 2 ft. SYNTAL precision molded thermoplastic " 1 Example of spraying width at 4 22 2 23
S pecial nozzl e s Special nozzles HARDI can supply a range of nozzles for special applications such as tank and container cleaning. If you do not find what you need in this product guide, please contact your HARDI dealer. 4 lat spray nozzle SYNTAL 131 isting nozzle SYNTAL Pressure range: - Hollow one nozzle Very ine (V) droplets SYNTAL Recommended pressure range: - Recommended boom height above target: 2" to ". SYNTAL This nozzle provides an elliptical spray pattern (lat an) with a angle. A uniform distribution is obtained, with correct overlap between spray patterns from adjacent nozzles. This nozzle has additional applications for industrial purposes. 4 4-4- 4-4-1 4-4-24 4-2 GP 0.0 0.0 0. 0. 0.13 0.1 32 0. 0.13 0.1 0.1 0.1 0.22 32 0.1 0.1 0. 0.23 0.2 0. 3 0.21 0.24 0.2 0. 0.34 0. 33 0.2 0.31 0.34 0. 0.44 0.3 3322 0.3 0.42 0.4 0.3 0. 0. 3333 0.3 0. 0.4 0.4 0.3 0. 3344 This nozzle consists of a synthetic tip and a blue swirl plate (31). The droplet spectrum is very fine (V). The low capacity and extremely fine atomization make this nozzle useful for special purposes such as adjustment of air temperature and humidity in hot climates. 131 GP 0.0 0.03 0.01 0.04 33 30 Deflector spray nozzle SYNTAL Pressure range: - 1 SYNTAL 42 2 lat spray nozzle SYNTAL Pressure range: 3-3 SYNTAL Deflector spray nozzle of synthetic material. This nozzle type produces a round spray pattern (3 ). This nozzle provides an elliptical spray pattern (flat fan) with a 2 angle. The narrow spray angle results in a high impact spray, which is well suited for cleaning as well as for spraying trees and bushes, where a long range is very useful. 42 42-42-24 42-24 0 1 2 3 42-3 42-4 42-4 1.1 2.2 2. 1 343 2.4 4 2 34 GP 0.2 0.2 0.4 0.0 1.1 1.3 3 0. 0.2 0. 1. 1. 1.3 31 0.0 1.0 1.2 1. 2.02 321 131 1.2 1.2 1.2 2.23 3.41 332 The speed of the droplets is low, producing a slowly dispersing cloud. The atomization and dispersion are optimal between -. Useful for raising humidity in greenhouses etc. 30 30-2 0 1 1 30-3 30- GP 0.41 0.4 0. 0.0 0. 0.1 0. 1.022 1.3 4 0. 0. 0.1 0. 0. 0.4 1.02 1.23 1.33 0. 0. 0.2 0. 0.1 1. 1.3 1. 1.3
Sp ec i a l n oz z les Special nozzles ulti-hole rinsing nozzle SYNTAL Agitation nozzle - SYNTAL ulti hole rinsing nozzle solid streams Pressure range: - Efficient container cleaning SYNTAL Pressure range: 1-22 SYNTAL Rotary rinsing nozzle Rotary spray swaths Pointed top for easy foil opening SYNTAL This nozzle type is used for tank agitation. The venturi effect of the nozzle increases the agitation B several times in relation to the liquid passing through the calibrated part of the nozzle A. These nozzles are mainly used for washing out residues in chemical containers and bags. an also be used for some irrigation purposes. Tests have shown that the most efficient way of cleaning chemical containers is by using these rinsing nozzles. ulti hole 4 Rotary Useful for a fast and continuous mixing of, for example, pesticides in suspension. -1. -2.0 GP 3. 312 B A 2310 A 1 22 4 0 1 22-2. - GP B 0.32 1. 0.3 0.4 2. 0. 3.42 0.2 4.42 0. 4.4 1.02.2 1.2. 342 A B A 0.4 2.4 0. 2. 0. 3.4 0. 1..4 1.21.00 1.. 1.1.4 343 B 0.2 3.1 0. 3.2 1.1 4.4 1.42.4 1.3.0 2.00.3 2.. 3.1.21 344 A B 1.3 1. 4.2 1.3..04.0. 3 1. 1. 34 Tank cleaning nozzle Rotating nozzle for tank cleaning solid streams at high velocity SYNTAL This nozzle is made for cleaning the insides of sprayer tanks. The different angle of the solid streams ensures excellent rinsing of the entire inside surface of the sprayer tank. Tank cleaning nozzle GP 1 22 31 20 HARDI recommends the use of a cleaning agent to ensure sufficient cleaning of the tank. 2
ie ld sp r a y i n g HARDI DUOAP HARDI DUOAP gives you higher volume rate while still maintaining proper droplet size. itted with two or LD nozzles HARDI DUOAP will give fine to medium spray, suitable for fungicide spraying. Two different nozzles can be used. A Standard and a INIDRIT nozzle will give you the dual benefit of having fine droplets that ensures good coverage in the top of the crop and coarse droplets that penetrates to the lower and more dense areas. HARDI DUOAP fitted with two INIDRIT nozzles will give superior penetration into dense crops like Potatoes and Soybeans. The advantages of the two nozzle cap with HARDI LD ISO nozzles: ompact Easy to assemble two piece design Ability to apply higher GPA rate while still maintaining proper droplet size for fungicide applications. -degree forward and rearward trajectory for increased canopy penetration. Allows for increased field speed, which maximizes efficiency. Order Number 003 003 03 03 03 03 03 20323 203 4233 Description HARDI DUOAP with HARDI DUOAP with HARDI DUOAP with HARDI DUOAP with HARDI DUOAP with HARDI DUOAP with HARDI DUOAP with HARDI DUOAP only O-ring seal for nozzle O-ring seal for cap 2-Orange LD 01 tips 2-Green LD 01 tips 2-Yellow LD 02 tips 2-Lilac LD 02 tips 2-Blue LD 03 tips 2-Red LD 04 tips 2-Brown LD 0 tips HARDI DUOAP with 2 HARDI LD-1 LowDrift Tips 1 1 4..2..4 4..2. 3..0.2.4.0 4...0. 0.2 0.2 0.0 0.33 0.3 0.3. 1.4 1..0 21. 23.. 1..0.0 1 1 1...2.4 13...0....0.0.0.2.0.0.0.2.0.0 1.. 0.22 0.34 0.0 0.44 0.40 0.. 23. 2 2.0 31.4.0 1.2 1 22.2 2 2.2.0. 1.0 1.0. 22.4. 1..4.4 1. 1.2 1.2.2. 1. 1...4..0 1 1.0.0..0.4.0.4.2.4 1.2 0.34 0.434 0.0 0. 0. 0.2 2. 2 3 3 3.2 1. 24. 2..4 3 1 1.4 21.2 23. 2.0 2.0 1 1.0 1.. 2 24.. 1 1.4.2 21.. 1.. 13. 1 1....4 13. 1.2 1 = Spray quality: Very ine (V), ine (), edium (), oarse (), Very oarse ()..2.4.0...2.0.2..2.2..4.2 1.4.2.0.2.0 GP GPA at PH 1 1 03-Blue GPA at PH 0.424 0. 0.0 0. 0.34 0.4 2.2. 3 3 43. 4.2 2. 2 3 3 3.2 1.0 22.0 2.4 2.4 31.2 33. 1. 1.2 22.2 2 2.2 2.4.0 1.2 1 22.2 2 2.2. 1.4 1..0 21. 23..4.0 1.2 1. 1..0.0 1 1 1...2.4 13...0..0.0.2 1 04-Red 0. 0.2 0.00 0.4 0.0 1.0 33. 41.2 4..2 2.0 3 3. 4 4.4 2.4 2 2.4 3 3.0 41. 4 2. 2 3 3 3.2 1. 2 2 2. 32.4 3. 23. 2 2.0 31.4 1.2 1. 21. 2 2 2..0 1.2 1 22.2 2 2.2.0. 1.0 1.0. 22.4. 1..4.4 1. 1.2 1 0-Brown 01-Green 02-Yellow 2 02-Lilac GP 0. 0. 1.000 1. 1.224 1.322 42.0 1.4.4. 3 4 4..4..4.0 3. 42.4 4 2.0.2 2.2 32.2 3.2 41. 4.4 4.2 23.4 2. 3 3..4 43. 2. 2 3 3 3.2 1.0 23.4 2.0.2 3 3. 1. 24. 2..4 3 1 1.4 21.2 23. 2.0 2.0 1 1.0 1.. 2 24.. 1 1.4.2 21. The nozzles are available both as single nozzles (S) and as OLOR TIPS (T), where the nozzle is integrated in the SNAP-IT cap.
i lt er s ilters 0 * 1st step is the top mounted suction filter, with a standard size of mesh. *0 0 *0 * 0 0 from 00 to 02 from 02 to 03 04 or bigger lat spray nozzle size 3rd step is the Inline filters (optional on some products). These filters reduce nozzle filter blockages and make filter cleaning quicker. 0 * 0 () ilter size mesh (*standard) () 2nd step is the selfcleaning filter. In this filter a by-pass system ensures that the filter screen is always clean. The standard size is 0 mesh. TRIPLETS provide ease of switching between different nozzle types and sizes. TRIPLET No: 2 or mounting special nozzles such as the large drop flat spray nozzle and hollow cone nozzles use the 32 adaptor piece together with 3/" union nuts. 1 ISO and INJET nozzles use the white 3/" union nut (32) 2 black HARDI SNAP-IT cap (333). Also can be uesd to mount Tee-Jet Tips to HARDI 3 Nozzle Bodies with o-ring 4233. HARDI part number 334 (Black cap) fits round TeeJet nozzles and is used with o-ring 4233. Both caps also can use the HARDI nozzle screens. 2 3 the black TeeJet cap, (3342) (gasket: 242222) 1 Available as an option are the nozzle filters. These filters make sure that particles that would block the nozzles are captured. With these the total filtration process is completed. Available in, 0 and 0 mesh. In-line filter complete with housing etc. - ready to fit! Hose 1/2" 3/4" It is essential that the filters are chosen according to the nozzles used. HARDI part 4233 Nitril O-ring for HARDI nozzles (Between ap and Nozzle Body ) inch 0.033 0.0 i tti n gs ittings The HARDI filter range ensures optimal filtration of spray liquid on its way from the tank to the nozzles. The filtration system is a 3-step (optional 4-step) process: esh & 0 0.013 0 esh 0.0 0 0 1 pcs 2200 2200 22000 1 pcs 141 141 141 4 4 1 pcs 31 33 3 esh 0 4 4 1 pcs 1443 1444 144 0 4 42 pcs pcs 22 4 22 21 234 4 2
www.hardi-us.com HARDI NORTH AERIA IN. WEST th STREET 33 SOVEREIGN ROAD DAVENPORT, IA. 20 LONDON, ON N 1A Phone: (3) 3-1 Phone: (1) -21 ax: (3) 3-1 ax: (1) -221 http://www.hardi-us.com HIA-ARKETING US-12-04-