Aesculap Surgical Instruments Micro Instruments for Cardiac and Vascular Surgery
Think Innovation. Think Aesculap. In this catalog, we are presenting a fine range of microsurgical instruments commonly used in cardiac and vascular surgery. It includes a new line of lightweight, single-use microsurgical scalpels with an innovative ergonomic handle design. Also included are a select range of vascular clips, scissors, forceps and needle holders produced using the latest technology to provide outstanding functionality. The diamond dust (DIADUST) coating or tungsten carbide (DUROGRIP) technology which we use for our forceps and needle holders not only provides a safe grip on tissue and suture material, but also ensures high wear resistance in the instrument jaw. DIADUST DUROGRIP The working surfaces of the jaws of all DIADUST instruments are coated with a fine layer of dia mond dust. Over 100 years of experience has demonstrated to us which materials to choose for optimum performance. This results in a hard surface with high wear resistance. Moreover, the structure of the DIADUST coating provides a reliable grip for fine needles and sutures, as well as for tissue. Suitable for 4/0 to 10/0 sutures. Aesculap DUROGRIP needle holders have jaws with high quality tungsten carbide inserts. A smooth jaw surface as well as a 0.2 mm micro serration guarantee a safe hold on the needle. We recommend carbide inserts with a smooth jaw surface for micro suture material 9/0 11/0 and inserts with a 0.2 mm pitch serration for suture material 6/0 10/0. 2
TABLE OF CONTENTS Micro Scissors Page 6-11 DIADUST Micro Forceps Page 12-17 DIADUST Micro Needle Holders Page 18-29 Instruments for Shunt Operations Page 30-33 DUROGRIP Micro Needle Holders Page 34-43 STANDARD Micro Needle Holders Page 44-47 Scalpels & Scalpel Handles Page 48-49 Vessel Hooks and Clips Page 50-51 Care & Maintenance Page 52-53 Index Page 54-55 Cross Reference Page 56-59 3
Think Aesculap. Profound knowledge derives from appreciating the significance of individual pieces of knowledge or experience and fitting them together into a coherent network. A principle B. Braun has been following consistently for more than 160 years, clearly reflects our corporate claim: Sharing Expertise. Sharing knowledge across all company divisions creates a broad, solid knowledge base for everyone involved. This results in detailed solutions and maximum safety for the patient, nurse and surgeon. With over 130 years of experience in the surgical instrument market, the Aesculap Division is a competent partner for this interdisciplinary knowledge-sharing process. The Aesculap brand intelligently and economically combines high-quality products with process-oriented services. Aesculap is a reliable and accepted partner for the entire surgical process in the hospital. Aesculap owes its standing among the best in the business to its employees, who, searching for the best possible solution, are never satisfied with their initial idea, and repeatedly examine, question and optimize every development. Aesculap is more than a supplier of high-precision surgical instruments. It s a partner who listens carefully and contributes ideas, and understands your needs and requirements. From products to services and seminars for all areas of activity within the hospital, Aesculap is your source for surgical solutions. Think Quality Think Partnership 4
Think Economy Think Competence Think Service Think Innovation 5
Micro Scissors with Flat Handle 165 mm, 6 1 /2 6
Micro Scissors 25 45 60 90 125 straight curved on flat Fine blade FM470R FM471R FM472R FM473R FM474R Fine blade, with one probe pointed blade FM451R FM452R FM453R FM454R FM455R Delicate blade FM437R FM438R FM439R FM440R FM441R FM442R FM436R Ultra delicate blade FM431R FM432R FM433R FM434R FM435R FM444R FM430R 7
Micro Scissors with Round Handle 165 mm, 6 1 /2 8
Fine blade Delicate blade Delicate blade, with one probe pointed blade Ultra delicate blade 25 45 60 90 125 straight curved on flat FM476R FM477R FM478R FM479R FM480R FM482R FM483R FM484R FM485R FM486R FM488R FM481R FM489R FM490R FM491R FM492R FM493R FM504R FM505R FM506R FM507R FM508R FM503R 9Micro Scissors
Microvascular Scissors 180 mm, 7 10
Micro Scissors 25 45 60 90 125 Standard blade BC522R BC523R BC524R BC525R BC526R Delicate blade BC531R BC532R BC533R BC534R BC535R Ultra delicate blade BC515R BC516R BC517R BC518R BC519R 11
DIADUST Micro Forceps with Round Handle and Counter Balance Jaw diam. of ring: 1 mm, straight diam. of ring: 1 mm, curved diam. of ring: 2 mm, straight platform tips, straight platform tips, curved 1 mm, DeBakey tip Total length (in.) 150 mm 6 FM570R FM571R FM578R FM581R 185 mm 7 1 /4 FM572R FM573R FM579R FM580R FM583R FM592R 210 mm 8 1 /4 FM574R FM575R FM599R FM585R FM600R 230 mm 9 FM576R FM577R 250 mm 10 FM596R FM595R FM594R FM593R DIADUST The diamond dust coating ensures an even harder and more wear resistant surface on the inside of the jaws. The structure of the DIADUST coating leads to a reliable grip for fine needles and sutures, as well as for tissue. 12
DIADUST Micro Forceps 150 mm, 6 185 mm, 7 1 /4 210 mm, 8 1 /4 230 mm, 9 250 mm, 10 13
DIADUST Micro Forceps with Round Handle without Counter Balance Jaw diam. of ring: 1 mm, straight diam. of ring: 1 mm, curved diam. of ring: 1 mm with platform tip platform tip, straight 1 mm, DeBakey tip Total length (in.) 185 mm 7 1 /4 FM597R FM587R FM582R FM586R FM590R 210 mm 8 1 /4 FM598R FM589R FM584R FM588R FM591R DIADUST The diamond dust coating ensures an even harder and more wear resistant surface on the inside of the jaws. The structure of the DIADUST coating leads to a reliable grip for fine needles and sutures, as well as for tissue. 14
DIADUST Micro Forceps 185 mm, 7 1 /4 210 mm, 8 1 /4 15
DIADUST Micro Forceps with Flat Handle Jaw 1 mm, cross serrated 1 mm, DeBakey tip diam. of ring: 1 mm, straight diam. of ring: 1 mm, curved 1 mm, straight Total length (in.) 180 mm 7 BD190R BD191R BD192R BD193R BD194R 200 mm 8 BD195R BD196R 250 mm 10 BD197R Also offered *No images available BD198R BD200R BD201R Cushing DUROGRIP forceps STR. 210 mm, 8 1 /4 Thumb DIADUST forceps 1 mm STR. 180 mm, 7 Thumb DIADUST forceps 1 mm STR. 210 mm, 8 1 /4 DIADUST The diamond dust coating ensures an even harder and more wear resistant surface on the inside of the jaws. The structure of the DIADUST coating leads to a reliable grip for fine needles and sutures, as well as for tissue. 16
DIADUST Micro Forceps 180 mm, 7 200 mm, 8 250 mm, 10 17
DIADUST Micro Needle Holders with Round Handle Suture size with catch Total length (in.) 7/0 and smaller 5/0 and smaller 4/0 and smaller 4/0 and smaller 120 mm 4 3 /4 FM520R 145 mm 5 3 /4 FM522R 160 mm 6 1 /4 FM521R FM523R 185 mm 7 1 /4 FM563R FM564R FM218R 210 mm 8 1 /4 FM565R FM566R FM228R FM221R 230 mm 9 FM567R FM568R FM230R FM223R without catch Total length (in.) 7/0 and smaller 5/0 and smaller 120 mm 4 3 /4 FM524R 145 mm 5 3 /4 160 mm 6 1 /4 185 mm 7 1 /4 210 mm 8 1 /4 230 mm 9 FM525R FM526R FM527R FM532R FM528R FM529R FM530R FM531R FM533R 18
DIADUST The diamond dust coating ensures an even harder and more wear resistant surface on the inside of the jaws. The structure of the DIADUST coating leads to a reliable grip for fine needles and sutures, as well as for tissue. DIADUST Micro Needle Holder 120 mm, 4 3 /4 145 mm, 5 3 /4 160 mm, 6 1 /4 185 mm, 7 1 /4 210 mm, 8 1 /4 230 mm, 9 19
DIADUST Micro Needle Holders with Round Handle Suture size with catch, heavy style Total length (in.) 190 mm 7 1 /2 230 mm 9 250 mm 10 2/0 and smaller FM538R FM539R FM534R Suture size without catch, heavy style Total length (in.) 190 mm 7 1 /2 230 mm 9 250 mm 10 2/0 and smaller FM535R FM536R FM537R DIADUST The diamond dust coating ensures an even harder and more wear resistant surface on the inside of the jaws. The structure of the DIADUST coating leads to a reliable grip for fine needles and sutures, as well as for tissue. 20
DIADUST Micro Needle Holder 190 mm, 7 1 /2 230 mm, 9 250 mm, 10 21
DIADUST Micro Needle Holders with Flat Handle Suture size with catch Total length (in.) 7/0 and smaller 5/0 and smaller 145 mm 5 3 /4 FM541R 170 mm 6 3 /4 185 mm 7 1 /4 FM540R FM542R 210 mm 8 1 /4 FM543R 230 mm 9 FM544R without catch Total length (in.) 7/0 and smaller 5/0 and smaller 145 mm 5 3 /4 FM546R 170 mm 6 3 /4 FM545R 185 mm 7 1 /4 210 mm 8 1 /4 230 mm 9 FM547R FM548R FM549R 22
DIADUST The diamond dust coating ensures an even harder and more wear resistant surface on the inside of the jaws. The structure of the DIADUST coating leads to a reliable grip for fine needles and sutures, as well as for tissue. DIADUST Micro Needle Holder 145 mm, 5 3 /4 170 mm, 6 3 /4 185 mm, 7 1 /4 210 mm, 8 1 /4 230 mm, 9 23
DIADUST Micro Needle Holders with Flat Knurled Handle Suture size with catch Total length (in.) 5/0 and smaller 185 mm 7 1 /4 210 mm 8 1 /4 230 mm 9 FM550R FM551R FM552R Suture size without catch Total length (in.) 5/0 and smaller 185 mm 7 1 /4 210 mm 8 1 /4 230 mm 9 FM553R FM554R FM555R DIADUST The diamond dust coating ensures an even harder and more wear resistant surface on the inside of the jaws. The structure of the DIADUST coating leads to a reliable grip for fine needles and sutures, as well as for tissue. 24
DIADUST Micro Needle Holder 185 mm, 7 1 /4 210 mm, 8 1 /4 230 mm, 9 25
DIADUST Micro Needle Holders DIADUST The diamond dust coating ensures an even harder and more wear resistant surface on the inside of the jaws. The structure of the DIADUST coating leads to a reliable grip for fine needles and sutures, as well as for tissue. GLASSER FM560R Suture size: 5/0 and smaller 125 mm, 5 GLASSER FM561R Suture size: 5/0 and smaller 180 mm, 7 26
DIADUST Micro Needle Holder FM236R with catch Suture size: 5/0 and smaller 210 mm, 8 1 /4 FM276R without catch Suture size: 5/0 and smaller 210 mm, 8 1 /4 27
DIADUST Micro Needle Holders RYDER DIADUST BM301R 140 mm 5 1 /2 BM325R 160 mm 6 1 /4 BM302R 180 mm 7 BM327R 220 mm 8 3 /4 BM328R 250 mm 10 The diamond dust coating ensures an even harder and more wear resistant surface on the inside of the jaws. The structure of the DIADUST coating leads to a reliable grip for fine needles and sutures, as well as for tissue. RYDER BM301R-BM328R 28
DIADUST Micro Needle Holder BM300R 195 mm, 7 3 /4 29
Instruments for Shunt Operations The shunt instruments were developed specifically for operations on vessels that are between 4 and 6 mm in diameter. This width is frequently found in dialysis shunt operations and re-operations. These instruments combine the features of conventional and micro instruments. The working tips are larger than usual for instruments of this type, and the micro instrument style handles provide for greater ease of use. The shunt set was developed in cooperation with Prof. Dr. med. Gottfried Müller, M.D. Caritas Krankenhaus Bad Mergentheim Uhlandstrasse 7 97980 Bad Mergentheim 30
sharp FD251R sharp 1 blade probe pointed Instruments for Shunt Operations FD252R sharp/sharp, 1 blade serrated FM042R Micro scissors 180 mm, 7 FD251R-FD252R Micro scissors 180 mm, 7 FM043R Micro scissors 180 mm, 7 31
Instruments for Shunt Operations diam. of ring: 2 mm BV059R Self-retaining retractor 120 mm, 4 3 /4 FM047R Micro ring forceps 180 mm, 7 32
DIADUST DIADUST DIADUST with platform tip FD258R FD259R Instruments for Shunt Operations FD255R Micro tissue forceps 180 mm, 7 FD253R Micro dissecting forceps 180 mm, 7 FD258R-FD259R Micro needle holders 180 mm, 7 33
DUROGRIP Micro Needle Holders with Round and Flat Handles 0.2 Aesculap needle holders have jaws with tungsten carbide inserts with a choice of structure depending on the application. A smooth jaw surface as well as a 0.2 mm micro serration leads to a safe hold on the needle. We recommend tungsten carbide inserts with a smooth jaw surface for micro suture material 9/0 11/0 and inserts with a 0.2 mm pitch serration for suture material 6/0 10/0. 0.2 34 FM388R with catch 180 mm, 7 FM390R with catch 200 mm, 8
0.2 0.2 with smooth jaw 0.2 DUROGRIP Micro Needle Holder CASTROVIEJO CASTROVIEJO CASTROVIEJO CASTROVIEJO BM001R 145 mm, 5 3 /4 BM002R 145 mm, 5 3 /4 BM004R 180 mm, 7 BM005R 215 mm, 8 1 /2 35
DUROGRIP Micro Needle Holders RYDER Aesculap needle holders have jaws with tungsten carbide inserts with a choice of structure depending on the application. A smooth jaw surface as well as a 0.2 mm micro serration leads to a safe hold on the needle. We recommend tungsten carbide inserts with a smooth jaw surface for micro suture material 9/0 11/0 and inserts with a 0.2 mm pitch serration for suture material 6/0 10/0. 0.2 0.2 0.2 0.2 0.2 BM054R 135 mm 5 1 /4 BM055R 155 mm 6 BM056R 175 mm 7 BM057R 210 mm 8 1 /4 BM058R 230 mm 9 RYDER BM054R-BM058R very delicate 36
0.4 0.4 0.4 0.4 BM044R 135 mm 5 1 /4 BM045R 175 mm 7 BM046R 195 mm 7 3 /4 BM047R 265 mm 10 1 /2 DUROGRIP Micro Needle Holder RYDER BM044R-BM047R 37
DUROGRIP Micro Needle Holders with Ergonomic Handles Aesculap needle holders have jaws with tungsten carbide inserts with a choice of structure depending on the application. A smooth jaw surface as well as a 0.2 mm micro serration leads to a safe hold on the needle. We recommend tungsten carbide inserts with a smooth jaw surface for micro suture material 9/0 11/0 and inserts with a 0.2 mm pitch serration for suture material 6/0 10/0. 0.2 38 REIN-KUPKA BM310R without catch 190 mm, 7 1 /2
0.2 0.2 DUROGRIP Micro Needle Holder REIN-KUPKA BM311R with catch 190 mm, 7 1 /2 HELLBERG-KUPKA BM320R with locking catch 210 mm, 8 1 /4 39
DUROGRIP Micro Needle Holders Aesculap needle holders have jaws with tungsten carbide inserts with a choice of structure depending on the application. A smooth jaw surface as well as a 0.2 mm micro serration leads to a safe hold on the needle. We recommend tungsten carbide inserts with a smooth jaw surface for micro suture material 9/0 11/0 and inserts with a 0.2 mm pitch serration for suture material 6/0 10/0. 0.4 0.4 0.4 0.4 0.4 BM032R 150 mm 6 BM035R 180 mm 7 BM036R 230 mm 9 BM037R 250 mm 10 BM038R 305 mm 12 DE BAKEY BM032R-BM038R 40
0.4 0.4 0.2 0.2 BM033R BM034R BM063R BM064R 165 mm 210 mm 165 mm 210 mm 6 1 /2 8 1 /4 6 1 /2 8 1 /4 0.2 0.2 0.2 BM025R BM026R BM027R 180 mm 200 mm 230 mm 7 8 9 DUROGRIP Micro Needle Holder DE BAKEY BM033R-BM064R very delicate BM025R-BM027R very delicate 41
DUROGRIP Micro Needle Holders Aesculap needle holders have jaws with tungsten carbide inserts with a choice of structure depending on the application. A smooth jaw surface as well as a 0.2 mm micro serration leads to a safe hold on the needle. We recommend tungsten carbide inserts with a smooth jaw surface for micro suture material 9/0 11/0 and inserts with a 0.2 mm pitch serration for suture material 6/0 10/0. BM074R 150 mm 6 BM075R 180 mm 7 BM076R 230 mm 9 0.4 0.4 BM051R BM052R 195 mm 7 3 /4 245 mm 9 3 /4 RYDER BM074R-BM076R with smooth jaws 42 DE BAKEY BM051R-BM052R one extended handle and curved rings ensure optimum grip
0.4 DUROGRIP Micro Needle Holder BM184R 200 mm, 8 DE BAKEY BM040R slender pattern 305 mm, 12 43
STANDARD Micro Needle Holders with Round Handle FD240R FD241R BM562R FD230R FD232R 120 mm 4 3 /4 FD231R FD233R BM560R 115 mm 4 1 /2 BARRAQUER BARRAQUER BARRAQUER REILL BM560R-BM562R without catch FD230R-FD231R without catch 120 mm, 4 3 /4 FD232R-FD233R with catch 120 mm, 4 3 /4 FD240R-FD241R without catch 150 mm, 6 44
FM398R without catch 200 mm FD244R FD246R FD245R FD247R FM392R with catch 20 mm FD242R FD243R STANDARD Micro Needle Holder FD242R-FD243R with catch 150 mm, 6 FD244R-FD245R without catch 185 mm, 7 1 /4 FD246R-FD247R with catch 185 mm, 7 1 /4 FM398R-FM392R 45
STANDARD Micro Needle Holders with Flat Handle FD076R BM563R FD079R BM564R CASTROVIEJO BM563R-BM564R with catch 145 mm, 5 3 /4 FD076R-FD079R without catch 160 mm, 6 1 /4 46
FD080R FD045R without catch FD081R FD046R with catch STANDARD Micro Needle Holder FD080R-FD081R without catch 185 mm, 7 1 /4 JACOBSON FD045R-FD046R 185 mm, 7 1 /4 YASARGIL FD048R with catch 200 mm, 8 47
Single-Use Microsurgery Scalpels Microsurgery blades, stainless steel, sterile BB363R ST = Package of 1 piece BB364R PAK = Package of 10 pieces Single use, sterile packed, with lightweight ergonomic handle. Sales Unit: PACK = Package of 5 Pieces Micro Scalpel with Polymer Handle (Grey) Micro Scalpel with Polymer Handle (Blue) Micro Scalpel with Polymer Handle (Yellow) BB365R PAK = Package of 10 pieces BB367R PAK = Package of 10 pieces BA364 165 mm, 6 1 /2 BA365 165 mm, 6 1 /2 BA367 165 mm, 6 1 /2 48
Scalpel Handles for Microsurgery Blades Scalpels and Scalpel Holders Titanium Scalpel Handle CASPAR Scalpel Handle BB045T BB046R BB048R BB052R BB054R 145 mm, 5 3 /4 135 mm, 5 1 /2 155 mm, 6 180 mm, 7 200 mm, 8 49
Nerve and Vessel Hooks FD396R FD397R FD398R FD399R short ball tip ball tip sharp blunt 50 KRAYENBÜHL FD396R-FD399R 185 mm, 7 1 /4
Vessel Clips Closing force (g) VEIN 50 g FE010K FE011K FE012K FE013K FE014K ARTERY 80 g FE020K FE021K FE022K FE023K FE024K straight curved curved tips angled to side knee-bent MÜLLER FE010K-FE024K Non-traumatic vessel clips, temporary jaw profiles, cross-serrated Vessel Hooks and Clips Closing force 30 g Micro Vessel Coronary Clamp straight FE001S MÜLLER FE005K Ligature Forceps 51
Care and Maintenance of Surgical Instruments Treatment of New Instruments Brand new instruments must be cleaned before the first sterilization or use. Protective caps and protective films must be removed completely, especially from chisels, raspatories or microsurgical instruments. After each use 1) Clean contaminated instruments as quick as possible. 2) Open instruments with a joint to a 90 angle. 3) For machine cleaning, place the instrument in a wire basket suitable for the cleaning process, (make sure the cleaning solu tion and rinse water from the machine come into contact with all surfaces of the instrument). 4) Completely dismantle any dismantable instruments. 5) Preferably dry disposal. 6) For wet disposal, always use an active cleaning disinfectant. Rinse the instrument thoroughly with clear, flowing water before machine cleaning and disinfecting. 7) If necessary, treat with ultrasound according to the manufacturer s instructions: for effective mechanical support during manual cleaning for pre-treatment of instruments with dried-on contaminant before machine cleaning 8) If cleaning manually or in a machine: Always follow manufacturer s instructions for detergents and other cleaning solutions. Manual Cleaning / Disinfection 1) Place instruments into a suitable disinfectant with active cleaning properties so that all surfaces, inner cavities, lumens and openings come into contact with the solution. Follow the disinfectant manufacturer's instructions. 2) After chemical disinfection, always rinse thoroughly with clear, flowing water. Follow the instructions provided by the manufacturer of disinfectant. 3) Remove any dirt still clinging to the instrument with a soft synthetic brush. Do not use a scouring or metal brush. 4) Clean any lumens and conduits with soft, round, synthetic brushes. Please note - the lumen and the brush must have the same diameter. 5) Final rinsing should be done with distilled or deionized water. 6) Dry instrument with an absorbent, soft and lint-free cloth. 7) Dry lumens and conduits with compressed air. 52
R R Machine Cleaning / Disinfection 1) Select the program according to the material (e.g. stainless instrument steel, aluminum) of the instrument to be cleaned. Follow the machine manufacturer's instructions. 2) Final rinsing to be done with deionized water. 3) Leave sufficient time for drying. 4) Remove the instrument from the machine immediately after the program is done. Care / Testing 1) Let instrument cool down to room temperature. 2) Lubricate movable parts (e.g. joints and ends) slightly with special sterilizationcapable, vaporpermeable lubricant (e.g. Aesculap STERLIT Spray or Lubricant). 3) After each cleaning and disinfection process, check the instrument to make sure it is clean, it functions properly and it has not suffered any damage, (e.g. bent, broken, fractured or worn parts). 4) Discard any damaged and defective instruments and replace. Storage 1) Place instruments with fine working ends and /or microsurgery instruments in a suitable storage rack. 2) Secure instruments with lock in the first detent. Sterilization 1) To steam sterilize, proceed as follows: Steam sterilization must be carried out according to a validated steam sterilization process (e.g. with a sterilizer meeting the specifications of EN 285 and validated according to EN 554). When using the fractional vacuum method, use the 134 C / 2 bar program for sterilization with a minimum holding time of 5 minutes. 2) Where possible, sterilize instruments in the first ratchet. Recommended Products: Care & Maintenance JG 600 Aesculap oil spray, DBP, in spraycan (non-cfc pro pellant), for lubricating instru ments prior to sterili zation. Physiologically safe according to DAB and 31 LMBG. JG 598 Aesculap Instrument Lubricant, DBP, for lubricating ends, locks etc. prior to sterilization. Physiologically safe according to DAB and 31 LMBG. 53
Index BA364 48 BA365 48 BA367 48 BB045T 49 BB046R 49 BB048R 49 BB052R 49 BB054R 49 BB363R 48 BB364R 48 BB365R 48 BB367R 48 BC515R 11 BC516R 11 BC517R 11 BC518R 11 BC519R 11 BC522R 11 BC523R 11 BC524R 11 BC525R 11 BC526R 11 BC531R 11 BC532R 11 BC533R 11 BC534R 11 BC535R 11 BD190R 16 BD191R 16 BD192R 16 BD193R 16 BD194R 16 BD195R 16 BD196R 16 BD197R 16 BM001R 35 BM002R 35 BM004R 35 BM005R 35 BM025R 41 BM026R 41 BM027R 41 BM032R 40 BM033R 41 BM034R 41 BM035R 40 BM036R 40 BM037R 40 BM038R 40 BM040R 43 BM044R 37 BM045R 37 BM046R 37 BM047R 37 BM051R 42 BM052R 42 BM054R 36 BM055R 36 BM056R 36 BM057R 36 BM058R 36 BM063R 41 BM064R 41 BM074R 42 BM075R 42 BM076R 42 BM184R 43 BM300R 29 BM301R 28 BM302R 28 BM310R 38 BM311R 39 BM320R 39 BM325R 28 BM327R 28 BM328R 28 BM560R 44 BM562R 44 BM563R 46 BM564R 46 BV059R 32 FD045R 47 FD046R 47 FD048R 47 FD076R 46 FD079R 46 FD080R 47 FD081R 47 FD230R 44 FD231R 44 FD232R 44 FD233R 44 FD240R 44 FD241R 44 FD242R 45 FD243R 45 FD244R 45 FD245R 45 FD246R 45 FD247R 45 FD251R 31 FD252R 31 FD253R 33 FD255R 33 FD258R 33 FD259R 33 FD396R 50 FD397R 50 FD398R 50 FD399R 50 FE001S 51 FE005K 51 FE010K 51 FE011K 51 FE012K 51 FE013K 51 FE014K 51 FE020K 51 FE021K 51 FE022K 51 FE023K 51 FE024K 51 FM042R 31 FM043R 31 FM047R 32 FM218R 18 FM221R 18 FM223R 18 FM228R 18 FM230R 18 FM236R 20 FM276R 27 FM388R 34 FM390R 34 FM392R 45 FM398R 45 FM430R 6 FM431R 6 FM432R 6 FM433R 6 FM434R 6 FM435R 6 FM436R 6 FM437R 6 FM438R 6 FM439R 6 FM440R 6 FM441R 6 FM442R 6 FM444R 6 FM451R 6 FM452R 6 FM453R 6 FM454R 6 FM455R 6 FM470R 6 FM471R 6 FM472R 6 FM473R 6 FM474R 6 54
FM476R 8 FM477R 8 FM478R 8 FM479R 8 FM480R 8 FM481R 8 FM482R 8 FM483R 8 FM484R 8 FM485R 8 FM486R 8 FM488R 8 FM489R 8 FM490R 8 FM491R 8 FM492R 8 FM493R 8 FM503R 8 FM504R 8 FM505R 8 FM506R 8 FM507R 8 FM508R 8 FM520R 18 FM521R 18 FM522R 18 FM523R 18 FM524R 18 FM525R 18 FM526R 18 FM527R 18 FM528R 18 FM529R 18 FM530R 18 FM531R 18 FM532R 18 FM533R 18 FM534R 20 FM535R 20 FM536R 20 FM537R 20 FM538R 20 FM539R 20 FM540R 22 FM541R 22 FM542R 22 FM543R 22 FM544R 22 FM545R 22 FM546R 22 FM547R 22 FM548R 22 FM549R 22 FM550R 24 FM551R 24 FM552R 24 FM553R 24 FM554R 24 FM555R 24 FM560R 26 FM561R 26 FM563R 18 FM564R 18 FM565R 18 FM566R 18 FM567R 18 FM568R 18 FM570R 12 FM571R 12 FM572R 12 FM573R 12 FM574R 12 FM575R 12 FM576R 12 FM577R 12 FM578R 12 FM579R 12 FM580R 12 FM581R 12 FM582R 14 FM583R 12 FM584R 14 FM585R 12 FM586R 14 FM587R 14 FM588R 14 FM589R 14 FM590R 14 FM591R 14 FM592R 12 FM593R 12 FM594R 12 FM595R 12 FM596R 12 FM597R 14 FM598R 14 FM599R 12 FM600R 12 Index 55
Cross Reference Scanlan Aesculap Page 3784-30 FD396R 50 3784-31 FD397R 50 3784-32 FD398R 50 3784-33 FD399R 50 4004-204 FM594R 12 4004-206 FM593R 12 4004-210 FM578R 12 4004-212 FM581R 12 4004-216 FM570R 12 4004-217 FM571R 12 4004-220 FM572R 12 4004-221 FM573R 12 4004-224 FM574R 12 4004-225 FM575R 12 4004-226 FM576R 12 4004-227 FM577R 12 4004-228 FM596R 12 4004-229 FM595R 12 4004-230 FM590R 14 4004-232 FM591R 14 4004-240 BD191R 16 4004-242 BD195R 16 4004-244 BD192R 16 4004-245 BD193R 16 4004-246 BD194R 16 4004-248 BD196R 16 4004-250 FM597R 14 4004-251 FM587R 14 4004-252 FM598R 14 4004-253 FM589R 14 4004-260 FD253R 33 4004-260 FM586R 14 4004-262 FM588R 14 4004-270 FM592R 12 4004-272 FM600R 12 Scanlan Aesculap Page 4004-280 FM582R 14 4004-282 FM584R 14 4004-320 FM579R 12 4004-57 BD198R 16 4004-77 BD190R 16 4004-79 BD197R 16 4004-84 BD200R 16 4004-88 BD201R 16 4004-95 FM580R 12 4004-96 FM583R 12 4004-98 FM599R 12 4004-99 FM585R 12 6006-100 FM551R 24 6006-102 FM554R 24 6006-108 FM543R 22 6006-110 FM548R 22 6006-116 BM005R 35 6006-120 FM236R 20 6006-120 FM566R 18 6006-121 FM565R 18 6006-122 FM276R 27 6006-122 FM531R 18 6006-123 FM527R 18 6006-124 FM221R 18 6006-124 FM221R 18 6006-129 FM567R 18 6006-131 FM532R 18 6006-138 FM561R 26 6006-158 FM544R 22 6006-159 FM549R 22 6006-170 FM550R 24 6006-171 FM553R 24 6006-174 FM552R 24 6006-175 FM555R 24 6006-29 BM325R 28 Scanlan Aesculap Page 6006-310 FM538R 20 6006-312 FM535R 20 6006-33 BM302R 28 6006-330 FM539R 20 6006-332 FM536R 20 6006-340 FM534R 20 6006-342 FM537R 20 6006-37 BM327R 28 6006-41 BM328R 28 6006-44 FM520R 18 6006-45 FM524R 18 6006-48 FM560R 26 6006-50 FM522R 18 6006-52 FM528R 18 6006-58 FM541R 22 6006-59 FM523R 18 6006-60 FM546R 22 6006-61 FM529R 18 6006-70 FD046R 47 6006-70 FM540R 22 6006-72 FD045R 47 6006-72 FM545R 22 6006-76 FD081R 47 6006-82 FM564R 18 6006-84 FM530R 18 6006-90 FM542R 22 6006-92 FM547R 22 7007-40 BC522R 11 7007-40-5 BC531R 11 7007-42 BC523R 11 7007-42-5 BC532R 11 7007-44 BC524R 11 7007-440 FM437R 6 7007-442 FM438R 6 7007-444 FM439R 6 7007-44-5 BC533R 11 56
Scanlan Aesculap Page 7007-446 FM440R 6 7007-448 FM441R 6 7007-450 FM470R 6 7007-452 FM471R 6 7007-454 FM472R 6 7007-456 FM473R 6 7007-458 FM474R 6 7007-46 BC525R 11 7007-460 FM476R 8 7007-462 FM477R 8 7007-464 FM478R 8 7007-46-5 BC534R 11 7007-466 FM479R 8 7007-468 FM480R 8 7007-479 FM451R 6 7007-48 BC526R 11 7007-481 FM452R 6 7007-483 FM453R 6 7007-485 FM454R 6 7007-48-5 BC535R 11 7007-487 FM455R 6 7007-490 FM482R 8 7007-492 FM483R 8 7007-494 FM484R 8 7007-496 FM485R 8 7007-498 FM486R 8 7007-540 FM431R 6 7007-542 FM432R 6 7007-544 FM433R 6 7007-546 FM434R 6 7007-548 FM435R 6 7007-590 FM504R 8 7007-592 FM505R 8 7007-594 FM506R 8 7007-596 FM507R 8 7007-598 FM508R 8 Jarit Aesculap Page 278-092 FM530R 18 278-093 FM564R 18 278-094 FM527R 18 278-095 FM565R 18 278-096 FM532R 18 278-097 FM567R 18 278-112 FM531R 18 278-113 FM566R 18 278-119 FM221R 18 279-100 FM586R 14 279-101 FM588R 14 279-110 FM597R 14 279-111 FM598R 14 310-305 FM477R 8 310-306 FM479R 8 310-307 FM480R 8 310-350 BC531R 11 310-351 BC532R 11 310-352 BC533R 11 310-353 BC534R 11 310-354 BC535R 11 311-350 BC515R 11 311-351 BC516R 11 311-352 BC517R 11 311-353 BC518R 11 311-354 BC519R 11 Cross Reference 57
Cross Reference V. Mueller Aesculap Page CH0650 FM522R 18 CH0652 FM528R 18 CH0658 FM541R 22 CH0660 FM546R 22 CH0670 FM540R 22 CH0672 FM545R 22 CH0682 FM564R 18 CH0684 FM530R 18 CH0690 FM542R 22 CH0692 FM547R 22 CH07450 FM470R 6 CH07452 FM471R 6 CH07454 FM472R 6 CH07456 FM473R 6 CH07458 FM474R 6 CH07460 FM476R 8 CH07462 FM477R 8 CH07464 FM478R 8 CH07466 FM479R 8 CH07468 FM480R 8 CH13020 FM581R 12 CH13023 FM583R 12 CH13024 FM578R 12 CH13025 FM580R 12 CH13038 FM483R 8 CH2448 BM564R 46 CH2452 BM001R 35 CH2456 BM004R 35 CH5661-001 FM451R 6 CH5661-002 FM452R 6 CH5661-003 FM453R 6 CH5661-004 FM454R 6 CH5661-005 FM455R 6 CH5720 BC531R 11 CH5720-001 BC515R 11 V. Mueller Aesculap Page CH04204 FM594R 12 CH04206 FM593R 12 CH04217 FM571R 12 CH04220 FM572R 12 CH04221 FM573R 12 CH04224 FM574R 12 CH04225 FM575R 12 CH04226 FM576R 12 CH04227 FM577R 12 CH04228 FM596R 12 CH04230 FM590R 14 CH04232 FM591R 14 CH04244 BD192R 16 CH04246 BD194R 16 CH04248 BD196R 16 CH04250 FM597R 14 CH04252 FM598R 14 CH04260 FM586R 14 CH04262 FM588R 14 CH04280 FM582R 14 CH04282 FM584R 14 CH04320 FM579R 12 CH06100 FM551R 24 CH06102 FM554R 24 CH06108 FM543R 22 CH06110 FM548R 22 CH06120 FM566R 18 CH06121 FM565R 18 CH06122 FM531R 18 CH06123 FM527R 18 CH06124 FM221R 18 CH06158 FM544R 22 CH06159 FM549R 22 CH0629 BM325R 28 CH0633 BM302R 28 V. Mueller Aesculap Page CH5725 BC532R 11 CH5725-001 BC516R 11 CH5730 BC533R 11 CH5730-001 BC517R 11 CH5735 BC534R 11 CH5735-001 BC518R 11 CH5740 BC535R 11 CH5740-001 BC519R 11 CH8030-21 FM599R 12 CH8035-21 FM585R 12 CH8160-19 FM550R 24 CH8589 BM005R 35 CH8590 FD048R 47 CH8592 FD046R 47 CH8752 FD245R 45 CH8756 FD244R 45 NL3086 FD396R 50 NL3087 FD397R 50 NL3088 FD398R 50 NL3089 FD399R 50 NL3785-037 FD246R 45 NL3785-039 FD247R 45 OP0703 BB048R 49 OP7399 BM002R 35 OP7412 BM563R 46 RH0872 BB365R 48 SU1587-06 BB363R 48 58
Pilling Aesculap Page 152818 BM002R 35 152825 BM001R 35 352577 BB365R 48 352591 BB048R 49 354964 BM004R 35 354972 FM523R 18 354973 FM529R 18 354992 BM325R 28 354994 BM302R 28 354996 BM327R 28 354998 BM328R 28 357530 FD396R 50 357531 FD397R 50 357532 FD398R 50 357533 FD399R 50 357601 FD046R 47 357603 FD048R 47 357642 FM479R 8 357643 FM480R 8 357653 FM477R 8 357654 FD244R 45 357654 FM392R 45 357655 FD245R 45 357656 FD246R 45 357657 FD247R 45 357667 FM388R 34 357670 FM398R 45 357676 FM390R 34 357690 FM471R 6 357691 FM474R 6 424100 BM563R 46 424110 BM564R 46 35-2150 BC522R 11 35-2152 BC523R 11 35-2154 BC524R 11 Pilling Aesculap Page 354964DG FM542R 22 354965DG FM548R 22 355558DG FM539R 20 355559DG FM534R 20 355570DG FM223R 18 355572DG FM218R 18 355573DG FM221R 18 357601DG FM547R 22 357603DG FM543R 22 357667DG FM564R 18 357670DG FM527R 18 357674DG FM230R 18 357674DG FM567R 18 357676DG FM228R 18 357676DG FM565R 18 Cross Reference 59
All rights reserved. Technical alterations are possible. This leaflet may be used for no other purposes than offering, buying and selling of our products. No part may be copied or reproduced in any form. In the case of misuse we retain the rights to recall our catalogs and price lists and to take legal actions. 2007 AESCULAP. ALL RIGHTS RESERVED. PRINTED IN THE USA. DOC719 5M 8/07 Aesculap is an equal opportunity employer Aesculap, Inc. 3773 Corporate Parkway Center Valley, PA 18034 Phone: 800-282-9000 www.aesculapusa.com