A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to AAL/R 6cyl. With Joint for GSFRCAA6,GPRE17 &GLVW. CAV Part no: 7135-29A 6pcs Delivery Valve Washers 5936-161 6pcs Element Barrel Locking Washers..7033-379 Air-Vent Screw Washers.....NW5-17W4 Cork Inspection Cover Casket...7118-30A 2pc Camshaft Bearing Endplate. 7118-25 Governor Gasket (Pneumatic Bedford) 7034-968 Governor Gasket (GSFRCAA6 &GLVW)..7023-794B Closure Cup. ( EFD Bedford).7033-527 2pc Camshaft Bearing Oil Seal 7097-166 6pcs Base Plate Closure Plugs.. 7097-231 Governor Tab Washer.. 7118-107 Lift Pump Gasket./.. 7118-31 Camshaft Key.NK1-6 Lead Seal. 5606-62 intended to imply that the parts are manufactured by the company mentioned.
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to Type: BPE4B CAV PART No: 7135-29B 4pcs 4pcs Delivery Valve Washers..5339-862 Element Barrel Lock Joints...5339-132 Air Vent Screw Joint 5339-383 Inspection Cover Joint 7012-48 Camshaft Oil Seal.7097-166 Camshaft Drive Key..NK1/6 Endplate Gasket...7010-409 Lift Pump Joint for BFP/K22...7010-417 Lift Pump Joint for DFP...7010-418 BPE FUEL PUMPS INSPECTION PLATE GASKETS BPE1B. 7010-6 BPE2B.7016-32 BPE3B.7017-27 BPE4B. 7012-48 BPE5B.7018-16 BPE6B.7010-384 In all cases, proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
Gasket & Seal Kit for a Mechanical/ Variable Governor Fitted to N& NNL. Fuel Pumps CAV Part no: 7135-29C Cover Housing Gasket...7023-795 Gasket.....7023-794 Gasket.....7126-41 Gasket Flange Housing.7023-536 O-Ring for Sealing Lever Cap....5855-30R O-Ring Stop Shaft.....5855-30AL Copper Washers Fulcrum Shaft 7023-880 Washer Oil Drain...NW5-49W4 Lead Seal.5606-62 4pc Washers Sealing Screws.5936-58K in all cases proprietary Part Numbers are quoted for reference only, and are not intended to imply that the parts are manufactured by the company mentioned
A Gasket Washer & Seal Kit for Reconditioning CAV Fuel Injection Pump. Fitted To BPE4A60S FERGUSON TRACTOR. TEF20. With Back Filter KIT Part No: 7135-29D Fuel Pump 4pcs Delivery Valve Washers 5936-22 Fibre Air-vent Screw Washers.....5339-132 4pcs Aluminum Element Barrel Locking Screw Washers...7033-379 Cork Inspection Cover Casket...7033-24 Camshaft Bearing Flange Paper Gasket (Drive End).. 7033-175 Camshaft Bearing Flange Paper Gasket (Rear End)...7033-176 Camshaft Bearing Oil Seal 7033-94 4pcs Base Closure Plugs...7033-201 Key for Camshaft..NK1-18 Key for Throttle & Stop Shaft. 7034-25 Filter Housing: Rubber Gasket.7096-17 Cork Gasket..7033-315 Filter Pad (Now Made in extra Thickness).....7097-231 Control Rod Limiting Screw Washer....7033-202 Copper Inlet Adaptor Copper Washer...NW5-49W4 Inlet Connection Copper Washers..5339-423 Governor Housing: Paper Gasket 7034-305 Stop Shaft Felts...7034-234 Excess Fuel Device: Gasket Cover Plate...7043-7 Lead Seal..5606-62 intended to imply that the parts are manufactured by the companies mentioned.
A Gasket & Seal Kit for a CAV Lift Pump Type: BPF/K22 & P PART No: 7135-29E Hand Primer ZC7264 Gasket.7010-417 2pc Valve. 7027-26 2pc Valve Spring 7027-27 3pc Spring Washer 5293-57 4pc Banjo Washers NW5-43W4 Spindle O-Ring 5855-30B intended to imply that the parts are manufactured by the company mentioned
Gasket & Seal Kit for a CAV NL/6 Fuel Pump. Fitted to N& NNL6 Fuel Pumps with Back Filter CAV Part No: 7135-29F 6pcs 6pcs 3pcs D-Valve Joints.. 7097-319 D-Valve 0-Rings...7097-45 Air Vent Joints.5339-131 Inspection Joint.....7097-34 Filter Felt Pads.7097-231 Gasket for Filter Cover..7097-51 Gasket for Filter Support Plate...7097-139 Gasket for Base Plate.7097-26 Gasket for Lift Pump..7097-19 Gaskets for Endplate....7097-30 Camshaft Oil seal 7097-166 Camshaft Key...NK1-6 Gasket for Mechanical Governor...7023-794 Gasket for Pneumatic Governor....7034-968 intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to NNL/R 8 cylinder. With back Filters CAV Part no: 7135-29G 8pcs Delivery Valve Washers 7097-319 8pcs Delivery Valve O-ring.7097-45 Fibre Air-Vent Screw Washers.....5339-131 Cork Inspection Cover Casket...7122-12 2pc Camshaft Bearing Endplate. 7097-30 2pc Camshaft Bearing Oil Seal 7097-166 Gasket Base Plate 7122-14 Gasket Base Plate 7122-14A 4pcs Filter Felt Pad.7097-231 Lift Pump Gasket.. 7097-19 Camshaft Key.NK1-6 Filter Cover Gasket..7122-13 Filter Plate Support Seal 7096-16 Washer Copper Inlet Connection...5339-314 Washer Copper Drain Screw...NW5-17W4 Washer Centre Bearing.5339-270A Washer Drain Plug. 5936-21 8pcs Plastic Cap D-Valve Seal.7014-234A intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a CAV Hydraulic Governor Fitted to N& NNL/R Fuel Pumps CAV Part no: 7135-29H Gasket Pump Housing 7095-151 Gasket Sandwich Plate..7095-311 Gasket Gear Pump..7095-156 Gasket Cover Plate..7095-157 Gasket Plunger Unit.7095-153 Gasket Flange Gasket..7095-182 Gasket Bearing Bracket..7095-481 Assortment of Washers & O-Seals necessary for the reconditioning of the unit intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to BPE4A. Perkins P4, IHC Engine Application & Others CAV Part No: 7135-29J 4pcs 4pcs 2pc 4pcs Delivery Valve Washers 5936-22 Fibre Air-Vent Screw Washers.....5339-383 Aluminium Element Barrel Locking Screw Washers...7033-379 Cork Inspection Cover Casket...7033-24 Camshaft Bearing Flange Paper Gasket (Drive End).. 7033-112 Camshaft Bearing Flange Paper Gasket (Governor End)..7076-60 Camshaft Bearing Oil Seal 7033-94 Camshaft Bearing Oil Seal (Double).7033-309 Copper Inlet Adaptor Copper Washer..NW5-49W4 Inlet Connection Copper Washers..5339-423 Camshaft Key.NK1-18 Stop shaft O-ring..5855-30AL Stop shaft Felts....7034-234 Brass Cambox Sealing Cups.7033-201 Lift Pump Gasket..7010-417 Lead Seal. 5606-62 intended to imply that the parts are manufactured by the companies mentioned.
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to AAL/R 4cyl. With Joint for: GSFRCAA6, GPRE17 &GLVW. CAV Part no: 7135-29K 4pcs Delivery Valve Washers 5936-161 4pcs Element Barrel Locking Washers..7033-379 Air-Vent Screw Washers.....NW5-17W4 Cork Inspection Cover Casket...7118-27A 2pc Camshaft Bearing Endplate. 7118-25 Governor Gasket (Pneumatic Bedford) 7034-968 Governor Gasket (GSFRCAA6 &GLVW)..7023-794B Closure Cup ( EFD Bedford).7033-527 2pc Camshaft Bearing Oil Seal 7097-166 4pcs Base Plate Closure Plugs.. 7097-231 Governor Tab Washer.. 7118-107 Lift Pump Gasket. 7118-31 Camshaft Key.NK1-6 Lead Seal. 5606-62 intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to BPE3A Perkins P3 Application & Others CAV Part No: 7135-29L 3pcs 3pcs 2pc 3pcs Delivery Valve Washers....5936-22 Fibre Air-Vent Screw Washers...5339-383 Aluminium Element Barrel Locking Screw Washers.7033-379 Camshaft Bearing Flange Paper Gasket (Drive End).. 7033-112 Camshaft Bearing Flange Paper Gasket (Governor End)..7076-60 Camshaft Bearing Oil Seal 7033-94 Copper Inlet Adaptor Copper Washer...NW5-49W4 Inlet Connection Copper Washers...5339-423 Camshaft Key..NK1-18 Stop Shaft Felts.. 7034-234 Stop Shaft 0-Ring.. 5855-30AL Stop shaft Key 7034-25 Brass Cambox Sealing Cups. 7033-201 Cork Inspection Cover Casket...7033-153 Lift Pump Gasket.. 7010-417 Lead Seal....5606-62 intended to imply that the parts are manufactured by the companies mentioned I
A Gasket & Seal Kit for a DFP6 Lift Pump Fitted to CAV AAL Fuel Pumps Part No:7135-29M 2pc 1PC 3pcs 2pc Diaphragm.. 7092-205 Gasket Lift Pump to Cambox..7118-31 Non Return disc Valve. 7092-256A Spring Cap..7092-218 Spring Priming Lever..7092-219 Washer 0-Ring 5936-58K O-Ring Priming Spindle 5855-30B Priming Spindle..7092-203 Operating Lever.... 7092-183 Fulcrum Pin..7092-206 Lead Seal 5606-62 Spring Washer...5293-57 Washer Banjo..NW5-22W4 intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to BPE6A. Perkins P6, R6, DBT Engine Application CAV Part No: 7135-29P 6pcs 6pcs 2pc 6pcs Delivery Valve Washers. 5936-22 Fibre Air-Vent Screw Washers.....5339-383 Aluminium Element Barrel Locking Screw Washers..7033-379 Camshaft Bearing Flange Paper Gasket (Drive End)...7033-112 Camshaft Bearing Flange Paper Gasket (Governor End)...7076-60 Camshaft Bearing Oil Seal. 7033-94 Copper Inlet Adaptor Copper Washer...NW5-49W4 Inlet Connection Copper Washers..5339-423 Camshaft Key.NK1-18 Stop Shaft Felts.7034-234 Stop Shaft O-ring...5855-30AL Stop shaft Key 7034-25 Brass. Cambox Sealing Cups 7033-201 Cork Inspection Cover Casket 6 cylinder....7033-47 Lift Pump Gasket. 7010-417 Lead Seal...5606-62 intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a CAV SF Mechanical Governor Fitted to N& NNL/R & AA Fuel Pumps CAV Part no: 7135-29Q 2pc 2pc Gasket Pump Housing (N&NN) 7023-794B Gasket Pump Housing (AA).. 7138-45 Gasket Housing Cover.7138-55 Gasket Bearing Bracket.7138-17 0-Ring Seal Stop Shaft.5855-30AL Washer Oil Drain Plug..5339-308 intended to imply that the parts are manufactured by the company mentioned
Gasket & Seal Kit for a CAV N/NN4 Fuel Pump Fitted to N& NNL4. Fuel Pumps with or without Back Filter CAV Part No: 7135-29R 4pcs 4pcs D-Valve Joints...7097-319 D Valve O -Rings.. 7097-45 Air Vent Joints 5339-131 Inspection Joint...7096-54 Filter Felt Pads..... 7097-231. Gasket for Filter Cover... 7096-14 Gasket for Filter Support Plate...7096-17 Gasket for Lift Pump...7097-19 Gasket for Base Plate.7076-11 Gasket for Endplate 7097-30 Camshaft Oil Seal..7097-166 Camshaft Key..NK1-6 Gasket for Mechanical Governor..7023-794 Gasket for Pneumatic Governor..7034-968 intended to imply that the parts are manufactured by the company mentioned
Pin & Bush Kit for a Mec/ Vari Governor Weight. Fitted to CAV Fuel Pumps CAV Part No: 7135-29S 4pcs Bush Short....7046-17 4pcs Bush Long... 7046-17A Pin Swivel.... 7023-392 Pivot Pin Long..7023-393 4pcs Pivot Pin Headed.....7023-458 Tab Washer......7023-519 Screw Fixing Case..NS50-19 4pcs Circlip 13mm. 5950-68 intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to BPF3B Gardner 6 cylinder Application Part No: 7135-29T Inspection Joint 7009-105 6pcs Delivery Valve Joints..5339-862 4pcs Air Vent Joints..5339-132 4pcs Air Vent Screws 7019-116A 6pcs Barrel Lock Screw Joints..5339-132 Felt Packing JO 6295 Clevis Pins 124PN Split Pin for Clevis Pin.101 PS 8pcs Sealing Washers EO 6656 intended to imply that the parts are manufactured by the companies mentioned I
A Gasket & Seal Kit for a C.A.V Fuel Pump TYPE DP15 Part No: 7168-303 intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a CAV DPA Fuel Pump with a Mechanical Governor. With or Without Advance Device Fitted. Part No: 7135-110 Contains all of the necessary: O-rings, Gaskets, Copper washers, Seals, etc For the refurbishment of the CAV DPA Fuel Pump. intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a CAV DPA Fuel Pump with a Hydraulic Governor. With or Without Advance Device Fitted. Part No: 7135-114 Contains all of the necessary: O-rings, Gaskets, Copper washers, Seals, etc For the refurbishment of the CAV DPA Fuel Pump. intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for an AMAL Lift Pump Fitted to a Gardner Engine Part No 120-15A Diaphragm Set of 3 120-129 Gasket Lift Pump to Cambox..MA210 Valve Seat 120-124 Inlet Valve Disc..136-024 Valve Seat Spring.120-286. Rubber Washer for Filter Cup 120-025 Split Pin for Fulcrum Pin.. 140-012 Fulcrum Pin..140-010 Steel Ball 120-023 Inlet Valve Washers...120-036 Washer D-Valve Cage.136-036 Large Washer for Inlet Banjo 120-035 intended to imply that the parts are manufactured by the company mentioned
Elements & Delivery Valves for CAV & Simms Fuel Pumps. Simms Elements SPE A Types 85905 7.5mm Fordson Tractor & Ford Trader SPE4A/6A 75S 85904 7.0mm. Fordson Tractor (Early) SPE4A70S380. 86203 7.0mm Ford Industrial Application 86204 7.5mm Ford Industrial Application 23460 6.0mm Ford Dexta 3cyl Tractor 86537 7.5mm BMC Nuffield Tractor SPE4A75S 86205 8.0mm BMC 5.1 5.7 85136 D-Valve BMC All applications 84055 D-Valve Ford Applications 7.5mm Elements & Dexta 82002 D-Valve Ford Applications 7.0mm Elements. CAV Elements BPE A S.Change Types. 7032-26A 6.0mm Ident: B57/1 Perkins P3/P4/P6 7032-83C 6.5mm Ident: BX39 Perkins R6 7032-33A 6.0mm Ident: B58/1 FE 20C. 7032-56 6.0mm Ident: BX26 David Brown Tractor 7033-359 D-Valve Perkins P3/P4/P6. FE20C David Brown 7033-361A D-Valve Perkins R6 Please Specify the Element Ident No or the Fuel pump Part Number before Ordering I intended to imply that the parts are manufactured by the companies mentioned
This End-Cap is fitted to the CAV Governor Type: BEP/AMN80S102X Fitted to: BPE4A60S Fuel Pump Ferguson TEF20C Application. The kit 7034-380A is complete with the fixing screws And the small key for the control lever shaft. intended to imply that the parts are manufactured by the companies mentioned
Ferguson TEF20C Fuel injection Pump. Type: BPE4A60S120S6341EL Replaces: Type BPE4A60Q120S6200EL BPE4A60Q120S6292EL BPE4A60S120S6293EL These are Fully Reconditioned CAV Fuel Injection Pumps on a Service Exchange Basis Fully overhauled with all new gaskets washers and Oil Seal New Camshaft Bearings, Delivery Valves, Filter Felts, Governor Diaphragm, Governor Control Pin & Sleeve, End Cap re-bushed with a new spindle. In all cases proprietary Part Numbers are quoted for reference only and are not intended to imply that the parts are manufactured by the companies mentioned
C.A.V. & SIMMS Pneumatic Governor Springs Fitted to Fuel Pumps CAV Main Springs for Pneumatic Governors. 7033-33 IDENT YELLOW STRIPE Free Length: 115mm Application: Perkins S6, David Brown 7034-253 Ii1ENT Green Strip Free Length: 135mm. Application: Perkins P3/P4/P6 & L4 7034-306 IDENT Blue Stripe. Free Length: 122mm. Application: Ferguson TEF 20 7034-376 IDENT No Colour Marking. Free Length: 152mm Application: Perkins S6, Leyland Simms GP/D90 Pneumatic Governor Springs. 22316 IDENT Application: BMC Nuffield. 24172 IDENT YELLOW STRIPE. Free Length: 210mm Application: Fordson Dexta SPE3A 87130 IDENT RED STRIPE. Free Length: 206mm Application: Fordson Major. BMC 3.8Litre 5.7 Litre 89633 IDENT BLUE STRIPE. Free Length: 152mm Application: Ford 6D Trader intended to imply that the parts are manufactured by the company mentioned
A Gasket & Seal Kit for a Simms Fuel Injection Pump. Part No: 506812 Fitted to SPE4A series with a GMVA & GVH Governor Suitable for Ford Industrial: SPE4A & BMC Industrial: SPE4A Please Note: For 6 cylinder Applications: Additional Parts Are Required. Inspection Gasket Part No: 85127. + 2 extra D Valve & Barrel Locking Washers 4pcs Delivery Valve Washers.P82009 Air Vent Screw Washers...21005 4pcs Element Barrel Locking Screw Washers..21906 2pc Camshaft Bearing Oil Seal.22159 Copper Inlet Adaptor Copper Washer...101404 Filter Capsule.82383 4pc Element Plunger Shims..82003 2pc Cam-box Drain Washer 22186 Cork Inspection Cover Casket...85947 Lift Pump Gasket.. 85960 Lead Seal...5606-62 Governor to Pump Casing 23343 Governor Cover Joint GMVA....23342 Governor Cover Joint GVH...23381 Governor Cross Shaft Joint 23370 O-Ring Stop Shaft GVH.126063-7 intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a Simms Fuel Injection Pump. Fitted to SPE3A series with a GPD Governor BMC: SPE3A75S473 GPD 90A47 BMC: SPE3A75S621 GPD90A47 Part Number: 501613 Ford Dexta: SPE3A60S 593A GPD90A63 Ford Dexta: SPE3A60S 402 GPD90A31 A Diaphragm is included for the FORD Dexta 3pcs Delivery Valve Washers.P82009 Air-Vent Screw Washers...21005 3pcs Element Barrel Locking Screw Washers.....21906 2pc Camshaft Bearing Oil Seal.22159 Copper Inlet Adaptor Copper Washer...101404 Filter Capsule.82383 3pc Element Plunger Shims...82003 Control Rod O-Seal.126064/9 Damper Assembly Washer..P86816 Cambox Drain Washer 22186 Cork Inspection Cover Casket...23462 Lift Pump Gasket.. 85960 Lead Seal...5606-62 Governor Diaphragm Ford Dexta 23484 intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a Simms Fuel Injection Pump. Fitted to SPE3A series with a GPD Governor BMC: SPE3A75S473 GPD 90A47 BMC: SPE3A75S621 GPD90A47 Ford Dexta: SPE3A60S 593A GPD90A63 Part No: 501614 Ford Dexta: SPE3A60S 402 GPD90A31 3pcs Delivery Valve Washers.P82009 Air-Vent Screw Washers...21005 3pcs Element Barrel Locking Screw Washers.....21906 2pc Camshaft Bearing Oil Seal.22159 Copper Inlet Adaptor Copper Washer...101404 Filter Capsule.82383 3pc Element Plunger Shims...82003 Control Rod O-Seal.126064/9 Damper Assembly Washer..P86816 Cambox Drain Washer 22186 Cork Inspection Cover Casket...23462 Lift Pump Gasket.. 85960 Lead Seal...5606-62 intended to imply that the parts are manufactured by the companies mentioned
Fitted to: A Gasket & Seal Kit for a Simms Fuel Injection Pump. SPE6A75S318 Fuel Pump. Ford Trader 6D Engine SPE4A75/80S Fuel Pump. BMC 5.1L & 5.8L Engine Kit Part No: 501615 6pcs 2pc 6pcs 6pcs Delivery Valve Washers 82009 Copper Air-Vent Screw Washer......21005 Element Barrel Locking Screw Washers....21906 Cork Inspection Cover Casket...85127 Camshaft Bearing Oil Seal 20084 Camshaft Bearing Oil seal 21182 Element Plunge Shims 82003 Copper Inlet Adaptor Washer...101404 Filter Gauze..82383 Lift Pump Gasket 85960 Washer Cambox Drain Screw.22186 Camshaft Key.. 19007 Lead Seal & Sealing Wire.5606-62 intended to imply that the parts are manufactured by the companies mentioned.
Fitted to: A Gasket & Seal Kit for a Simms Fuel Injection Pump. SPE4A75 Fuel Pump. Fordson Tractor Engine SPE4A75S Fuel Pump. BMC Nuffield Tractor Kit Part No: 501616 4pcs 4pcs 4pcs Delivery Valve Washers 82009 Copper Air-Vent Screw Washer......21005 Element Barrel Locking Screw Washers....21906 Cork Inspection Cover Casket...85947 Camshaft Bearing Oil Seal 20084 Camshaft Bearing Oil seal 21182 Element Plunge Shims 82003 Copper Inlet Adaptor Washer...101404 Filter Gauze..82383 Lift Pump Gasket 85960 Washer Cambox Drain Screw.22186 Camshaft Key.. 19007 Lead Seal & Sealing Wire.5606-62 intended to imply that the parts are manufactured by the companies mentioned.
Ford Applications Types: GPD90A39: Fuel Pumps SPE6A75S318. SPE4A75S498. SPE4A75S497. SPE4A75S500. SPE4A75S527. SPE4A75S561. Types: GPD90A35: SPE4A70S371. Types: GPD90A19: SPE4A70S368. SPE4A70S380. Types: GPD90A70: SPE4A75S647. SPE4A75S646. intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a Simms Minimec 4 Cylinder Fuel Injection Pump. Part No:506800 Contains all of the necessary: O-rings, Gaskets, Copper washers, Seals etc: For the refurbishment of the Simms Minimec 4 cylinder Fuel Pump. Includes both types of delivery valve washers Top sealing & Nylon. Various applications include; Ford, BMC. David Brown Dorman & Others intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a Simms Minimec 3 Cylinder Fuel Injection Pump. Part No: 506801 Contains all of the necessary: O-rings, Gaskets, Copper washers, Seals etc: For the refurbishment of the Simms Minimec 3 cylinder Fuel Pump. Includes both types of delivery valve washers Top sealing & Nylon. Various applications include; Ford, BMC. & Others intended to imply that the parts are manufactured by the companies mentioned
A Gasket & Seal Kit for a Simms Minimec 6 Cylinder Fuel Injection Pump. Part No: 506806 Contains all of the necessary: O-rings, Gaskets, Copper washers, Seals etc: For the refurbishment of the Simms Minimec 6 cylinder Fuel Pump. Includes both types of delivery valve washers Top sealing & Nylon. Various applications include; Ford, BMC. Leyland, David Brown, Vauxhall Dorman & Others intended to imply that the parts are manufactured by the companies mentioned
Various parts for a Simms SPE 3A Fuel Injection Pump. Application Ford Dexta SPE3A60S402/593 Lift Pump.AC461-110 Diaphragm..23484 Camshaft Bearings..20084 Camshaft Oil Seal...22159 ***** Inspection Cover Joint.23462 ***** Air Vent Screw 82858 Control Shaft 24421 Rocker 23471 Element..23460 Delivery Valve..84055 Tappet Springs.85127 Set of Roller Pin & Bush 10mm..23949 ***** These parts are included in our Gasket & Seal Kit Part No: 501614 intended to imply that the parts are manufactured by the companies mentioned