Providing Precision Prototyping Systems Worldwide for Over 30 Years Page 2 Quick Circuit - PCB prototyping systems Page 4-17 QCJ5 Page 18-21 QC12000 Page 22-25 QC9000 Page 26-29 QC7000 Page 30-33 QC5000 Page 34-35 QC3000 Page 36-41 Quick Circuit Maintenance Parts Page 42-46 Quick Circuit Upgrades Page 47 Multi-:Layer PCB systems Page 48-49 Quick Press Multi-Layer Press Page 50 Quick Plate through-hole plating Page 51 QP912 and QP1812 Page 52 Multi-Layer Layup kits (4-8 Layers) Page 53 Reflow and Laboratory Ovens Page 54 Surface Mount Reflow Oven A Page 55 Surface Mount Reflow Oven B Page 56 Laboratory Oven C (Gravity Convection) Page 57 Enclosures and Stands Page 58 QCJ5 Stand Page 59 Quick Circuit Stand (All Models) Page 60 QC3000 Stand and Enclosure Combination Page 61 Quick Circuit Enclosures (All Models) Page 62 T-Tech HEPA Vacuums, Bags and Filters Page 63 Dual Hepa Vacuum 115V/230V Page 64 Single Hepa Vacuum 115V/230V Page 65-66 Air Compressor Page 67-77 Tools and Materials Drill Bits End mills Routers T-Mills Board Material T-Tech, Inc. 510 Guthridge Ct. Norcross, Georgia 30092 U.S.A www.t-tech.com sales@t-tech.com Phone: 770-455-0676 Fax; 770-455-0676
About T-Tech Celebrating our 30th year of experience serving the industry, T-Tech, Inc. has evolved into the nation's leading manufacturer of printed circuit board prototyping systems with thousands of systems in the field. Our customers range from some of the world's largest corporations and research institutions to small businesses. With clients in over 46 countries, T-Tech, Inc. has developed a worldwide reputation for precision, quality, and service. T-Tech, Inc. has long been considered an industry innovator. T-Tech works closely with commercial and educational sectors around the world to support electronic design and research for analog, digital, and RF and microwave applications in sectors including Aerospace, Defense, and Telecommunications. T-Tech, Inc. continues to evaluate its customers' prototyping requirements in order to design new products that meet the industry's changing demands. In addition to the design and manufacture of the Quick Circuit system in Norcross, Georgia, the company develops and supports its own software. By manufacturing and offering products such as the Quick Plate through hole plating system, SMT Assembly Equipment and more, T-Tech provides all the resources required for in-house circuit board prototyping. T-Tech, Inc. is proud of its innovative approach to customer service. Unlimited technical support after the sale and free updates on documentation are all standard for T-Tech. Post sale customer visits by our staff keep us in touch with ongoing changes in our customers' prototyping requirements and help to maintain our valued relationships. Quick Circuit Systems T-Tech designs our Quick Circuit prototyping systems with the engineer's valuable time in mind. Intelligent data conversion software, simple setup and use, and unlimited technical support are a few of the ways T-Tech has achieved the satisfaction of thousands of customers! The Quick Circuit is a desktop prototyping solution used in the design and fabrication phase of a prototype product. In-house prototyping will save your company both time and money. Quick Circuit...Design it this morning, and test this afternoon! Quick Circuit prototyping systems mill away unwanted copper creating your circuit board by leaving pads and traces. Quickly produce accurate circuit board prototypes directly from your CAD data. Import Gerber, DXF, and Excellon files. Drill, mill, and route traces and spaces as fine as 0.004". Quick Circuit is the perfect solution for producing analog, digital, or RF/microwave prototypes. Quick Circuit systems offer a variety of options including; automatic tool change, software controlled depth of cut, front control panel for common system commands, 24K-100K spindle speeds, a wide range of table sizes, electronic, pneumatic, or stepper motor controlled Z-axis, air bearing pressure foot, fiducial recognition, and fully integrated vacuum table. QCJ5 QC 12000 QC 9000 QC 7000 QC 5000 QC 3000
Quick Circuit precision prototyping systems QCJ5 QC 12000 QC 9000 QC 7000 QC 5000 QC 3000
QCJ5the intelligent solution QCJ5 setting the NEW standard for in-house prototyping! 12, 24 or 32-Position Automatic Tool Change Projects run unattended and uninterrupted, adding valuable time back into an Engineer s day. ContactByTouch Automatic Depth Sensing Software controlled depth of cut settings, ensuring the highest level of precision and accuracy in all milling procedures. CheckByTouch Broken Tool Detection and software enabled tool management including linking 3 Axis Motion Pocket mill microwave boards, de-panel, repair circuit boards, fabricate enclosures, or create panels and housings. JVision Fiducial Recognition and Alignment Automatically Align circuit boards for multilayer production or rework with IsoPro 3.1 software managed fiducial recognition. ALCOA MIC6 Fully Integrated Precision Vacuum Table Secure materials to the precision flat surface ensuring accurate depth of cut and reducing damage to fragile prototypes. 60,000 or 100,000 RPM Variable Speed Spindle Available with a choice of 60,000 or 100,000 rpm high performance variable speed spindles. 4 Mil Trace and Insulation Width Create resolutions as fine as.004 mm (.00025 ) with traverse speeds as high as 150 in/min. Pre-Touch Pressure Foot Pre-Touch system applies evenly distributed pressure to the substrate prior to the drilling or milling operation. Integrated Front-Panel Controls Front panel controls provide the convenience of local access to common system commands. QCJ5 In-House Prototyping Simplified!
Features QCJ5-60 QCJ5-100 RPM - Software Controlled 0-60,000 0-100,000 3 Phase Spindle Power 300 Watts 300 Watts Smallest Drill Size.15mm (0.004 ) 0.1mm (0.004 ) Smallest Mill Size.15mm (0.004 ) 0.1mm (0.004 ) Milling Speed 3,800mm/min (150 /min) 3,800mm/min (150 /min) Traverse Speed 3,800mm/min (150 /min) 3,800mm/min (150 /min) Drilling Speed 180 Holes/min 180 Holes/min Routing Speed 3,800mm/min (150 /min) 4,500mm/min (180 /min) T-Tech, Inc. 510 Guthridge Ct. Norcross, GA. USA 30092 Phone 770.455.0676 800.370.1530 Fax 770.455.0970 Email info@t-tech.com Website http://www.t-tech.com Material Size 35cm x 40cm (14 x16 ) 35cm x 40cm (14 x16 ) Work Area 25x33x88 cm (10x13x3.5 ) 25x33x88 cm (10x13x3.5 ) Resolution 0.012mm (0.0005 ) 0.006mm (0.00025 ) Repeatability 0.008mm (0.00036 ) 0.004mm (0.00018 ) Stroke Z-Axis 76mm (3.0 ) 76mm (3.0 ) Machine Voltage 80-245 Volts 50/60Hz 80-245 Volts 50/60Hz Machine Dimensions 66x66x50cm (26x26x20 ) 66x66x50cm (26x26x20 ) Machine Weight 45 kg (99 lbs) 49 kg (108 lbs) Automatic Tool Change 12, 24, or 32 Tools 12, 24, or 32 Tools Axis Motion Control X,Y, Z Axis Stepper Motor X,Y, Z Axis Stepper Motor Automatic Depth Control Standard Standard Fiducial Recognition & Alignment Standard Standard Front Panel Controls Standard Standard Pressure Foot System Pre-Touch Pre-Touch Vacuum Table Fully Integrated Fully Integrated Sound Enclosure Integrated Integrated Air Requirements 95 psi 95 psi Windows Requirements 1.5Ghz Processor 1GB RAM Windows XP, Windows 7 1.5Ghz Processor 1GB RAM Windows XP, Windows 7
QCJ5 the intelligent solution Introducing the new Quick Circuit QCJ5 - T-Tech s advanced PCB Prototyping system! The QCJ5 delivers the precision, the speed, and automation required to take your prototyping capabilities to the next level. Empower yourself with these QCJ5 standard features! 3 axis motion with 3.0 of z-axis travel JVision fiducial recognition and alignment 12, 24 or 32 position automatic tool change Front Panel and Software Controls ContactByTouch automatic depth control 60,000 or 100,000 rpm spindle CheckByTouch tool detection w/linking ALCOA MIC6 integrated precision vacuum table PreTouch pressure foot 254mm x 330mm (10 x 13 ) work surface Integrated sound enclosure IsoPro 3.1 software The Quick Circuit QCJ5 advantage Automatic Tool Change Engineers have a critical need to reduce the time required to design and create circuit board prototypes. The Quick Circuit QCJ5 offers engineers automated tool changing system choices ranging up to 32 positions. Automatic Tool Change allows your system to run unattended and uninterrupted, providing time savings up to 400%, adding valuable time back into an engineer s day. 3 rd Axis Motion Control 3 rd Axis motion control empowers Engineers with increased ability to approach requirements that standard XY milling machines are incapable of. Depanel populated boards, repair circuit boards, fabricate microwave enclosures as well as pocket milling for microwave applications to name a few. The QCJ5 provides Engineers with the ability to take prototypes further down the design to test path in house. JVision Fiducial Recognition and Alignment JVISION fiducial recognition provides QCJ5 prototyping system users with the ability to align a circuit board for multilayer production or rework, through the use IsoPro 3.1 software managed fiducial recognition. The JVISION method of fiducial recognition alignment provides alignment accuracy that is not available on a pin-only alignment system. JVISION fiducial recognition and alignment capabilities, combined with the QCJ5 s 3.0 inches of vertical z-axis travel, provides users with the ability to easily de-panel populated SMT circuit boards. IsoPro 3.1 Software T-Tech s industry leading IsoPro 3.1 software allows users to become productive immediately. View and edit standard CAD output, create single or multiple isolation paths, specify partial or complete copper removal. Improved optimization reduces mill, drill and routing time. View machine status in real time with the new machine status bar. IsoPro provides a simple to learn method of controlling milling, drilling and routing procedures. This industry leading intuitive software program comes with the purchase of any Quick Circuit QCJ5 System, and is available for download at www.t-tech.com. Upgrade your system today!
QCJ5 the intelligent solution Accelerated Precision and Accuracy The Quick Circuit QCJ5 is capable of producing resolutions as fine as.006 mm (.00025 ) at traverse speeds as high as 150 inches per minute. Improve the quality of your fine pitched SMT, R/F Microwave, high speed digital and soft substrate designs. Achieve the ultimate in precision, accuracy and quality at maximum speeds! ContactByTouch Automatic Depth Control The Quick Circuit QCJ5 provides software controlled depth of cut settings, ensuring precision and accuracy in all milling procedures. ContactByTouch automatic depth control allows users to enter depth of cut values directly into software data fields, eliminating the need for manual settings and feeler gauges. PreTouch Pressure Foot System The Quick Circuit QCJ5 features a state of the art pneumatic pressure foot that applies evenly distributed pressure to the substrate prior to the drilling or milling operation. The PreTouch technique secures the material to the table prior to determining material height, or entry of a selected milling tool. Our clients are able to drill 100 micron-.004 holes with controlled feed rates and precision. The ability to easily and precisely regulate the pressure applied makes the QCJ5 system ideal for working with delicate materials such as Rogers TMM, RO3000/4000/5000/6000, and other soft or flexible circuit board materials. CheckByTouch Tool Detection The QCJ5 allows you to mill with confidence. The CheckByTouch function allows you to replace broken tools automatically. Simply link common replacement tools through the IsoPro 3.0 software and should a tool break, the system will automatically deposit the broken tool, pick up a new replacement and continue milling. ALCOA MIC6 Fully Integrated Precision Vacuum Table Our precision flat vacuum table allows users to create prototypes on standard, exotic, thin or flexible materials with greater precision. The combination of our matched PreTouch pressure foot and integrated vacuum table ensure that any material is held secure and precision flat, greatly increasing the ability to create a consistent depth of cut on analog, digital, RF/Microwave, or small fragile prototypes. Integrated Sound Enclosure The integrated Sound Enclosure encapsulates the Quick Circuit with sound dampening acoustical foam, reducing noise level to a quite 63db while providing a safe environment for the Quick Circuit system. T-Tech s lifetime technical and software support are standard with all Quick Circuit systems!
QCJ5 the intelligent system
QCJ5 features: Automatic Tool Change 12, 24 or 32 positions 60,000 or 100,000 rpm spindle 3 Axis Motion Control ContactByTouch Automatic Depth Control CheckByTouch Tool detection PreTouch Pressure Foot Fully Integrated Precision Vacuum Table Front Panel Controls Integrated Sound Enclosure
QCJ5 ContactByTouch The Quick Circuit QCJ5 ContactByTouch automatic depth control allows users to enter depth of cut values directly into software data fields, eliminating the need for manual settings and feeler gauges. The QCJ5 ContactByTouch method begins with each required tool moving to a point on the actual material being milled, touching the material in two locations, and registering the true offset of the material from the QCJ5 table height. This process occurs each time a new milling tool is required, providing a real time measurement of the material offset as the prototype is being milled. Depth of cut values are entered into the software for each tool by the user. The QCJ5 mills from the value that is provided by the ContactByTouch method producing extremely precise and consistent depth of cut results.f cut results.
QCJ5 CheckByTouch The Quick Circuit QCJ5 CheckByTouch tool detection provides users with the ability to mill with confidence The CheckByTouch method will detect when tool breakage occurs during the milling process Tools can be linked for automatic replacement when tool breakage occurs. depth of cut results.
QCJ5 PreTouch pressure foot The Quick Circuit QCJ5 PreTouch pressure foot provides increased accuracy in all milling processes The PreTouch pressure foot makes contact with the material prior to all tooling procedures ensuring that all material is precision flat prior to all milling procedures. The amount of pressure applied by the PreTouch pressure foot may be varied based on the material being milled. Increased pressure for thicker substrates, reduced for thin/flexible materials Pressure can be easily adjusted on the front control panel
QCJ5 Precision Vacuum Table The Quick Circuit QCJ5 is equipped standard with a fully integrated precision vacuum table Precision flat vacuum table is machined from ALCOA MIC6 cast aluminum plate Vacuum table flatness tolerance is maintained within.015"
QCJ5 Front Panel Controls The QCJ5 is the only desktop milling system to provide the convenience of front panel control of common system commands. Home Position System Pause X/Y Jog Continuous or Incremental Jog Feed Rate Mill Feed Rate Spindle RPM Adjustment Drill Feed Rate Z-Axis Up /Down Pressure Foot Up/Down Pressure Foot Up/Down Force Adjustment Vacuum Table 4 Zone Selection Material Change.
QCJ5 Front Panel Controls Reduces the need to move from computer work station to the PCB milling station to make adjustments. Provides interface with milling system for automated QCJ5 features. Control panel functions are also available in the IsoPro 3.1 software.
QCJ5 JVision Fiducial Recognition and Alignment IsoPro 3.1 and the powerful QCJ5 JVision Camera work together to automatically align prototypes with your digital data for rework, de-paneling and more. Complete your prototype and test. If rework of your board is required, JVision allows you to accurately and confidently align your prototype for further refinement.
QCJ5 the intelligent system
QUICK CIRCUIT QC12000S-F QC12000S-F - XY Milling Table with 13 x24 Work Area (shown with optional pneumatic z-axis) High Speed model includes: 5,000-60,000 RPM Spindle, Cables, Users Manual & Start-Up Kit. T-Tech's Quick Circuit High Speed Model provides everything you need to produce RF or Microwave circuit board prototypes within hours. The 13 x 24 extended work area provides ample space for larger projects. The software controlled high speed spindle provides variable tool speeds between 5,000 and 60,000 RPM. The high speed precision spindle produces the precise geometry required when creating RF and microwave prototypes. Higher spindle speeds provide extended tool life and faster XY traverse speeds. This system is equipped standard with IsoPro software, which enables automatic data conversion from almost any CAD package, and has the ability to import DXF, and export Gerber data. Common Applications: RF/Microwave, Analog, Digital Optional Upgrades: Pneumatic Z-Axis, Vacuum table, Air Bearing Pressure Foot
QC MODEL 12000S-F SYSTEM SPECIFICATIONS SPECIFICATIONS QC 12000S-F Spindle Speed RPM 5,000-60,000 RPM Software Controlled Variable Speed Machine Weight 24kg (53 lbs) Smallest Drill Hole Size 0.2mm (0.008 ) Max. Milling Speed 3.82 (150 ) /min Max. Traverse Speed 3.82 (150 ) /min Drilling Speed/Solenoid or Air 150 or 160 Max. Routing Speed 3.82 (150 ) min Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004 / 0.004 ) Material Size 40cm x 61cm (16 x 29 ) Board Work Area 33cm x 48cm (13 x 24 ) Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Minimum Trace/Space Power Supply Computer Requirement Supported File Formats 3.175mm (0.125 Shank Diameter) Industrial Standard 0.006mm (0.00025 ) 0.006mm (0.00025 ) 5mm (0.2 ) w/solenoid; 16mm (0.630 ) w/air Cylinder 16mm (0.630 ) 17mm (0.670 ) 0.100 mm / 0.100 mm (0.004 / 0.004 ) 100-240 Volt, 50-60Hz Windows 2000, XP, or Windows 7 Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF
QUICK CIRCUIT QC12000S-E QC12000S-E - XY Milling Table with 13 x24 Work Area (shown with optional pneumatic z-axis) Standard model includes: 8-24K, or 5-60K RPM Spindle, Cables, User Manual & Start-Up Kit. Affordable and economical, T-Tech's Quick Circuit Standard Model provides everything you need to produce circuit board prototypes within hours. Available with 8,000-24,000 or 5,000-60,000 rmp software controlled spindle speeds. making it an excellent fit for many applications. The QC12000 series is equippedstandard with IsoPro software, which enables automatic data conversion from all CAD packages. IsoPro software is designed to be intuitive, eliminating lengthy learning curves for the engineer. IsoPro software also provides users with the ability to import DXF and export Gerber data. Commonly used for: Power Supplies, Analog Circuits, Digital, RF, or Microwave applications Optional Upgrades: 5-60K variable speed spindle, pneumatic z-axis, vacuum table, air bearing pressure foot, trace cam
QC MODEL 12000S-E SYSTEM SPECIFICATIONS SPECIFICATIONS QC 12000S-E Spindle Speed RPM 8-23K RPM Software Controlled Variable Speed Machine Weight 24kg (53 lbs) Smallest Drill Hole Size 0.2mm (0.008 ) Max. Milling Speed 3.82 (150 ) /min Max. Traverse Speed 3.82 (150 ) /min Drilling Speed/Solenoid or Air 150 or 160 Max. Routing Speed 3.82 (150 ) min Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004 / 0.004 ) Material Size 40cm x 61cm (16 x 29 ) Board Work Area 33cm x 48cm (13 x 24 ) Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Minimum Trace/Space Power Supply Computer Requirement Supported File Formats 3.175mm (0.125 Shank Diameter) Industrial Standard 0.006mm (0.00025 ) 0.006mm (0.00025 ) 5mm (0.2 ) w/solenoid; 16mm (0.630 ) w/air Cylinder 16mm (0.630 ) 17mm (0.670 ) 0.100 mm / 0.100 mm (0.004 / 0.004 ) 100-240 Volt, 50-60Hz Windows 2000, XP, or Windows 7 Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF
QUICK CIRCUIT QC9000S-F QC9000S-F XY Milling Table with 19 x19 Work Area High Speed model includes: 5-60K RPM Spindle, Cables, Users Manual & Start-Up Kit. T-Tech's Quick Circuit High Speed Model provides everything you need to produce RF or Microwave circuit board prototypes within hours. The large 19 x 19 work area provides ample space for larger projects. The software controlled high speed spindle provides variable tooling speeds between 5,000 and 60,000 RPM. The high speed precision spindle produces the smoother cuts required when creating RF and microwave prototypes. The higher spindle speeds also provide extended tool life and faster XY traverse speeds. This system is equipped standard with IsoPro software, which enables automatic data conversion from almost any CAD package. IsoPro software is designed to be intuitive, eliminating lengthy learning curves. IsoPro software has the ability to import DXF, and export Gerber data. Commonly used in: RF/Microwave applications, research and development laboratories Optional Upgrades: Pneumatic Z-Axis, Vacuum Table, Air Bearing Pressure Foot, Trace-Cam
QC9000S-F With a work area of 480mm x 480mm (19 x 19 ) the Quick Circuit QC9000S-F is one of the largest in the industry. It s generous work area allows for prototyping of large antenna and back plane designs, as well as traditional analog and RF/Microwave circuit boards. All Quick Circuit precision prototyping systems include T-Tech s industry leading IsoPro software for automatic data conversion of most any CAD package. *shown with optional pneumatic z-axis Spindle Speed RPM Software Controlled Spindle Machine Weight 5,000-60,000 RPM Variable Speed 36kg (80 lbs) Smallest Drill Hole Size 0.2mm (0.008 ) Max. Milling Speed Max. Traverse Speed 3.82 (150 ) /min 3.82 (150 ) /min Drilling Speed Solenoid /Air 150 /160 Max. Routing Speed Torque 3.81m (150 ) min 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace Minimum Space Material Size Work Area Machine Dimensions Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Power Supply Computer Requirement Supported File Formats Works With all CAD Software 0.100mm / 0.100mm (0.004 / 0.004 ) 0.100mm / 0.100mm (0.004 / 0.004 ) 54cm x 61cm (21 x 24 ) 48cm x 48cm (19 x 19 ) 62cm x 71cm x 26cm (25.3 x 28 x 10 ) 3.175mm (0.125 Shank Diameter) Industrial Standard 0.006mm (0.00025 ) 0.006mm (0.00025 ) 5mm (0.2 ) w/solenoid; 16mm (0.630 ) w/air Cylinder 16mm (0.630 ) 17mm (0.670 ) 100-240 Volt, 50-60Hz Windows 2000 or XP Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF Accel, Allegro, AutoCAD, Eagle PCB, EEsof, Expedition, Genesys, HFSS, Mentor Board Station, OrCAD, PADS, Protel, Tango Utiliboard. Optional Upgrades: 60,000rpm spindle, Pneumatic Z-Axis, Pneumatic Pressure Foot, Vacuum Table
QUICK CIRCUIT QC9000S-E QC9000S-E XY Milling Table with 19 x19 Work Area Standard model includes: 8-23K RPM Spindle, Cables, Users Manual & Start-Up Kit. Affordable and economical, T-Tech's Quick Circuit Standard Model provides everything you need to produce circuit board prototypes within hours. The Standard Model has software controlled spindle speeds that allow variable motor speeds between 8,000 and 23,000 RPM making it an excellent fit for many applications. With a 19 x 19 work area, you can prototype on a grand scale! This system also comes standard with IsoPro software, which enables automatic data conversion from almost any CAD package. The software is designed to be intuitive, eliminating lengthy learning curves. IsoPro software also has the ability to import DXF and export Gerber data. Commonly used in: Education, Power Supplies, Analog Circuits, Low Speed Digital Optional Upgrades: 5-60K Variable Spindle, Pneumatic Z-Axis, Vacuum Table, Air Bearing Pressure Foot, Trace-Cam
QC9000S-E With a work area of 480mm x 480mm (19 x 19 ) the Quick Circuit QC9000S-E is one of the largest in the industry. It s generous work area allows for prototyping of large antenna and back plane designs, as well as traditional analog and RF/Microwave circuit boards. All Quick Circuit precision prototyping systems include T-Tech s industry leading IsoPro software for automatic data conversion of most any CAD package. *shown with optional pneumatic z-axis Spindle Speed RPM Software Controlled Spindle Machine Weight 8,000-24,000 RPM Variable Speed 36kg (80 lbs) Smallest Drill Hole Size 0.2mm (0.008 ) Max. Milling Speed Max. Traverse Speed 3.82 (150 ) /min 3.82 (150 ) /min Drilling Speed Solenoid /Air 150 /160 Max. Routing Speed Torque 3.81m (150 ) min 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace Minimum Space Material Size Work Area Machine Dimensions Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Power Supply Computer Requirement Supported File Formats Works With all CAD Software 0.100mm / 0.100mm (0.004 / 0.004 ) 0.100mm / 0.100mm (0.004 / 0.004 ) 54cm x 61cm (21 x 24 ) 48cm x 48cm (19 x 19 ) 62cm x 71cm x 26cm (25.3 x 28 x 10 ) 3.175mm (0.125 Shank Diameter) Industrial Standard 0.006mm (0.00025 ) 0.006mm (0.00025 ) 5mm (0.2 ) w/solenoid; 16mm (0.630 ) w/air Cylinder 16mm (0.630 ) 17mm (0.670 ) 100-240 Volt, 50-60Hz Windows 2000 or XP Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF Accel, Allegro, AutoCAD, Eagle PCB, EEsof, Expedition, Genesys, HFSS, Mentor Board Station, OrCAD, PADS, Protel, Tango Utiliboard. Optional Upgrades: 60,000rpm spindle, Pneumatic Z-Axis, Pneumatic Pressure Foot, Vacuum Table
QUICK CIRCUIT QC7000S-F QC7000S-F XY Milling Table with 13 x19 Work Area *(Shown with optional pneumatic pressure foot and air actuated z-axis) High Speed model includes: 5-60K RPM Spindle, Cables, Users Manual & Start-Up Kit. T-Tech's Quick Circuit High Speed Model provides everything you need to produce RF or Microwave circuit board prototypes within hours. The large 13 x 19 work area provides ample space for larger projects. The software controlled high speed spindle provides variable motor speeds between 5,000 and 60,000 RPM. The high speed spindle produces the smoother cuts required when creating RF and microwave prototypes. The higher spindle speed also provides extended tool life and faster milling speeds. This system is equipped standard with IsoPro software, which enables automatic data conversion from almost any CAD package. IsoPro software is designed to be intuitive, eliminating lengthy learning curves. IsoPro software has the ability to import DXF and export Gerber data. Commonly used in: RF/Microwave applications, research and development laboratories Optional Upgrades: Pneumatic Z-Axis, Vacuum Table, Air Bearing Pressure Foot, Trace-Cam
QC MODEL 7000S-F SYSTEM SPECIFICATIONS SPECIFICATIONS QC 7000S-F Spindle Speed RPM 5-60K RPM Software Controlled Variable Speed Machine Weight 24kg (53 lbs) Smallest Drill Hole Size 0.2mm (0.008 ) Max. Milling Speed 3810mm (150 ) /minute Max. Traverse Speed 3810mm (150 ) /minute Drilling Speed Solenoid or Air Solenoid -3810mm (150")/minute or Air- 4064mm (160")/minute Max. Routing Speed 3810mm (150 ) /minute Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004 / 0.004 ) Material Size 40cm x 61cm (16 x 24 ) Board Work Area 33cm x 48cm (13 x 19 ) Machine Dimensions 48cm x 71cm x 26cm (15.3 x 17 x 10 ) Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Minimum Trace/Space Power Supply Computer Requirement Supported File Formats 3.175mm (0.125 Shank Diameter) Industrial Standard 0.006mm (0.00025 ) 0.006mm (0.00025 ) 5mm (0.2 ) w/solenoid; 16mm (0.630 ) w/air Cylinder 16mm (0.630 ) 17mm (0.670 ) 0.100 mm / 0.100 mm (0.004 / 0.004 100-240 Volt, 50-60Hz Windows 2000 or XP Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF
QUICK CIRCUIT QC7000S-E QC7000 - XY Milling Table with 13 x19 Work Area (shown with optional pneumatic z-axis) Standard model includes: 8-23K RPM Spindle, Cables, Users Manual & Start-Up Kit. Affordable and economical, T-Tech's Quick Circuit Standard Model provides everything you need to produce circuit board prototypes within hours. The Standard Model has software controlled spindle speeds allowing variable motor speeds between 8,000 and 23,000 RPM making it an excellent fit for many applications. This system also comes standard with IsoPro software, which enables automatic data conversion from almost any CAD package. The software is designed to be intuitive, eliminating lengthy learning curvesto the engineer. The software also has the ability to import DXF and export Gerber data. Commonly used in: Education, Power Supplies, Analog Circuits, Low Speed Digital Optional Upgrades: 5-60K variable speed spindle, pneumatic z-axis, vacuum table, air bearing pressure foot, trace cam
QC MODEL 7000S-E SYSTEM SPECIFICATIONS SPECIFICATIONS QC 7000S-E Spindle Speed RPM 8-23K RPM Software Controlled Variable Speed Machine Weight 24kg (53 lbs) Smallest Drill Hole Size 0.2mm (0.008 ) Max. Milling Speed 3.82 (150 ) /min Max. Traverse Speed 3.82 (150 ) /min Drilling Speed/Solenoid or Air 150 or 160 Max. Routing Speed 3.82 (150 ) min Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004 / 0.004 ) Material Size 40cm x 61cm (16 x 24 ) Board Work Area 33cm x 48cm (13 x 19 ) Machine Dimensions 48cm x 71cm x 26cm (15.3 x 17 x 10 ) Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Minimum Trace/Space Power Supply Computer Requirement Supported File Formats 3.175mm (0.125 Shank Diameter) Industrial Standard 0.006mm (0.00025 ) 0.006mm (0.00025 ) 5mm (0.2 ) w/solenoid; 16mm (0.630 ) w/air Cylinder 16mm (0.630 ) 17mm (0.670 ) 0.100 mm / 0.100 mm (0.004 / 0.004 100-240 Volt, 50-60Hz Windows 2000 or XP Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF
QUICK CIRCUIT QC5000S-F QC5000S-F XY Milling Table with 10 x13 Work Area *(Shown with optional pneumatic pressure foot and air actuated z-axis) Standard model includes: 5-60K RPM Spindle, Cables, Users Manual & Start-Up Kit. T-Tech's Quick Circuit High Speed Model provides everything you need to produce RF or Microwave circuit board prototypes within hours. The software controlled high speed spindle provides variable motor speeds between 5,000 and 60,000 RPM. The higher speeds produce the smooth and precise cuts required to create RF and Microwave prototypes. Additional high speed spindle benefits include; extended tool life and faster milling speeds. This system is equipped standard with IsoPro software, which enables automatic data conversion from almost any CAD package. The software is designed to be intuitive, eliminating lengthy learning curves. IsoPro software has the ability to import DXF and export Gerber data. Commonly used in: RF/Microwave applications, research and development laboratories Optional Upgrades: Pneumatic Z-Axis, Vacuum Table, Air Bearing Pressure Foot, Trace-Cam
QC MODEL 5000S-F SYSTEM SPECIFICATIONS SPECIFICATIONS QC 5000S-F Spindle Speed RPM 5-60K RPM Software Controlled Variable Speed Machine Weight 24kg (53 lbs) Smallest Drill Hole Size 0.2mm (0.008 ) Max. Milling Speed 60 ipm (1.5 m) Max. Traverse Speed 60 ipm (1.5 m) Drilling Speed/Solenoid or Air 60 ipm (1.5 m) Max. Routing Speed 3.82 (150 ) min Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004 / 0.004 ) Board Work Area Machine Dimensions Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Minimum Trace/Space Power Supply Computer Requirement Supported File Formats 25cm x 33cm (10 x 13 ) (15.3 x 17 x 10 ) 3.175mm (0.125 Shank Diameter) Industrial Standard 0.006mm (0.00025 ) 0.006mm (0.00025 ) 5mm (0.2 ) w/solenoid; 16mm (0.630 ) w/air Cylinder 16mm (0.630 ) 17mm (0.670 ) 0.100 mm / 0.100 mm (0.004 / 0.004 100-240 Volt, 50-60Hz Windows 2000 or XP Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF
QUICK CIRCUIT QC5000S-E QC5000 - XY Milling Table with 10 x13 Work Area Standard model includes: 8,000-24,000 RPM Spindle, Cables, Users Manual & Start-Up Kit. Affordable and economical, T-Tech's Quick Circuit Standard Model provides everything you need to produce circuit board prototypes within hours. The Standard Model has software controlled spindle speeds allowing variable motor speeds between 8,000 and 24,000 RPM, making it an excellent fit for many applications. This system also comes standard with IsoPro software, which enables automatic data conversion from almost any CAD package. The software is designed to be intuitive, eliminating lengthy learning curves for the engineer. IsoPro software also has the ability to import DXF and export Gerber data. Commonly used in: Education, Power Supplies, Analog Circuits, Low Speed Digital Optional Upgrades: 5-60K Variable Spindle, Pneumatic Z-Axis, Vacuum Table, Air Bearing Pressure Foot, Trace-Cam
QC MODEL 5000S-E SYSTEM SPECIFICATIONS SPECIFICATIONS QC 5000S-E Spindle Speed RPM 8,000-24,000 RPM Software Controlled Variable Speed Machine Weight 24kg (53 lbs) Smallest Drill Hole Size 0.2mm (0.008 ) Max. Milling Speed 60 ipm (1.5 m) Max. Traverse Speed 60 ipm (1.5 m) Drilling Speed/Solenoid or Air 60 ipm (1.5 m) Max. Routing Speed 3.82 (150 ) min Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004 / 0.004 ) Board Work Area Machine Dimensions Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Minimum Trace/Space Power Supply Computer Requirement Supported File Formats 25cm x 33cm (10 x 13 ) (15.3 x 17 x 10 ) 3.175mm (0.125 Shank Diameter) Industrial Standard 0.006mm (0.00025 ) 0.006mm (0.00025 ) 5mm (0.2 ) w/solenoid; 16mm (0.630 ) w/air Cylinder 16mm (0.630 ) 17mm (0.670 ) 0.100 mm / 0.100 mm (0.004 / 0.004 ) 100-240 Volt, 50-60Hz Windows 2000 or XP Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF
QUICK CIRCUIT QC3000S-E QC3000S-E - XY Milling Table with 6 x13 Work Area Standard model includes: 8,000-24,000 RPM Spindle, Cables, Users Manual & Start-Up Kit. Affordable and economical, T-Tech's Quick Circuit QC3000 Standard Model provides everything you need to produce circuit board prototypes within hours. The Standard Model has a software controlled spindle allowing variable motor speeds between 8,000 and 24,000 RPM making it an excellent fit for many applications. This system also comes standard with IsoPro software, which enables automatic data conversion from almost any CAD package. The software is designed to be intuitive, eliminating lengthy learning curves for the engineer. IsoPro software also has the ability to import DXF and export Gerber data. Common applications: Education, Power Supplies, Analog Circuits, Low Speed Digital Optional Upgrades: 5-60K Variable Spindle, Pneumatic Z-Axis, Vacuum Table, Air Bearing Pressure Foot, Trace-Cam
QC MODEL 3000S-E SPECIFICATIONS QC 3000S-E Spindle Speed RPM 8-24K RPM Software Controlled Spindle Variable Speed Smallest Drill Hole Size 0.2mm (0.008 ) Max. Milling Speed 3.82 (150 ) /min Max. Traverse Speed 3.82 (150 ) /min Drilling Speed/Solenoid or Air 150 or 160 Tool Change Semi-Automatic / Software Prompting Tool Holder Standard 1/8 LED Head Light Standard Max. Routing Speed 3.82 (150 ) min Torque 2.8 N-cm (4oz-in) Average Hits Per Bit 11,000 Minimum Trace / Space 0.100mm / 0.100mm (0.004 / 0.004 ) Material Size Board Work Area Machine Dimensions Tool size Resolution Repeatability Effective stroke Vertical Travel Vertical Clearance Minimum Trace/Space Power Supply Computer Requirement Supported File Formats Available Options 35cm x 40cm (14 x 16 ) 150mm x 300mm (6 x 12 ) (15.3 x 17 x 10 ) 3.175mm (0.125 Shank Diameter) Industrial Standard 0.006mm (0.00025 ) 0.006mm (0.00025 ) 5mm (0.2 ) w/solenoid; 16mm (0.630 ) w/air Cylinder 16mm (0.630 ) 17mm (0.670 ) 0.100 mm / 0.100 mm (0.004 / 0.004 ) 100-240 Volt, 50-60Hz Windows 2000 or XP Standard Gerber, Excellon/NC Drill, HPGL and Optional DXF 5,000 60,000 rpm high speed spindle Trace Cam Sound Enclosure Pneumatic Z-Axis HEPA Vacuum
Quick Circuit precision prototyping systems Quick Circuit Maintenance Parts Standard Spindle 24,000 rpm Spindle Motor 24,000 rpm Z-Axis Solenoid Lead Screws Upper/Lower Stepper Motor X/Y Axis Stepper Motor Z Axis
QUICK CIRCUIT standard spindle Standard Replacement Spindle T-Tech authorized 8,000-24,000 rpm Standard Spindle replacement part. ` Used on QC3000S-E, QC5000S-E,QC7000S-E, QC9000S-E and QC12000S-E Model: AS-STD-SPINDLE Shipping Weight: 4lbs
QUICK CIRCUIT replacement motor Standard Spindle Replacement Motor T-Tech authorized 8,000-24,000 rpm Standard Spindle replacement motor. Used on QC3000S-E, QC5000S-E,QC7000S-E, QC9000S-E and QC12000S-E Model: MOTOR-DRILL-O3 Shipping Weight: 1.75 lbs
QUICK CIRCUIT z-axis solenoid replacement Solenoid Replacement Z-Axis T-Tech Authorized Z-Axis solenoid replacement part. Used on QC3000S-E, QC5000S-E,QC7000S-E, QC9000S-E and QC12000S-E Model: SOLE-TUBULAR Shipping Weight: 2lbs
QUICK CIRCUIT lead screw replacement X/Y/Z Replacement Lead Screws T-Tech Authorized X/Y/Z/ Lead Screw replacement parts. Used on designated Quick Circuit models. See Table Below QC5000 Lower Lead Screw Model: D-0250-A Shipping Weight: 3lbs QC5000 / QC7000 Upper Lead Screw Model: D-0252-0 Shipping Weight: 3lbs QC7000 / QC9000 Lower lead Screw Model: D-0251-0 Shipping Weight: 3lbs QC7000 / QC9000 Lower lead Screw Model: D-0251-0 Shipping Weight: 3lbs
QUICK CIRCUIT stepper motor replacement Stepper Motor Replacement X/Y and Z T-Tech Authorized X/Y and Z stepper motor replacement parts. Used on designated Quick Circuit models. See Table Below X / Y axis Stepper Motor Model: STEPP-MOTOR-02 Shipping Weight: 3lbs For Use With Quick Circuit Model QC3000, QC5000, QC7000, QC9000, QC12000 and QCJ5 systems. Z- Axis Stepper Motor Model: STEPP-MOTOR-04 Shipping Weight: 3.5lbs
Quick Circuit precision prototyping systems Available Quick Circuit System Upgrades Vacuum Table Spindle Speed 60,000 rpm 100,000 rpm Pneumatic Pressure Foot Pneumatic Z-Axis
Quick Circuit - Vacuum Table T-Tech utilizes ALCOA MIC 6 Aluminum Cast Plate in the production of our Quick Circuit circuit board prototyping system 4 chambered precision vacuum tables. ALCOA MIC 6 Aluminum Cast Plate is finished to 20 micro-inches typical on both sides. Thickness tolerances are within +/-.005" from nominal on 1/4"- 4". Flatness tolerance is maintained within.015" on 1/4"-5/8" thickness. The use of ½ MIC 6 in the production of T-Tech Quick Circuit vacuum tables provides engineers with the industries most accurate and precise depth of cut available in PCB prototyping systems. T-Tech, Inc. is also the sole manufacturer and supplier of PCB prototype milling machines to offer a vacuum table with four independent vacuum chambers allowing users to direct the flow of air to specific work areas. Quick Circuit Vacuum Table Specifications LINEAR ACCURACY 0.015 in (.381 mm) DISTANCE BETWEEN HOLES 0.500 in (12.7 mm) HOLE SIZE 0.050 in (1.27 mm) MATERIAL MIC-6 Cast Aluminum Plate # OF INDEPENDENT CHAMBERS 4 (Excluding QCJ5 series. Entire table is active) WORK AREA Quick Circuit Model QC5000 10 in X 13 in (254mm X 330 mm) ADVANTAGES SOLID PRECISION FLAT HOLD DOWN FOR THIN AND ELASTIC MATERIALS - PRECISION FLAT HOLD DOWN OF ANY AND ALL SUBSTRATES UTILIZED FOR PROTOTYPING ABILITY TO DIRECT AIR FLOW TO ANY REQUIRED QUADRANT ENSURING MAXIMUM SECURITY OF SUBSTRATE TO MILLING TABLE - REDUCED SET-UP TIME.
QUICK CIRCUIT spindle motor upgrade High Speed Spindle Motor T-Tech Authorized High speed 60,000 rpm and 100,000 rpm spindles. Used on designated Quick Circuit models. See Table Below 60,000 RPM spindle motor w/precision tool collet. For Use With Quick Circuit Model QC5000, QC7000, QC9000 and QC12000 Model: MOTOR-DRILL-04 Shipping Weight: 5lbs 100,000 RPM spindle motor w/precision tool collet. For Use With Quick Circuit Model QC5000, QC7000, QC9000 and QC12000 Model: MOTOR-DRILL-06 Shipping Weight: 5lbs
AIR BEARING PRESSURE FOOT T-Tech's Air Bearing Pressure Foot provides the ability to make precise depths of cut and finer milling detail, enhancing your ability to work with softer laminated substrates. Microwave, RF, and Digital Prototype Circuits on the Quick Circuit platform. The enhanced Pressure Foot provides a pneumatic air cushion for minimal contact during the milling process, leaving a virtually unmarked surface.
QUICK CIRCUIT pneumatic z-axis Pneumatic Z-Axis Upgrade T-Tech Authorized Pneumatic Z-Axis Upgrade. The T-Tech Quick Circuit Pneumatic z-axis upgrade maximizes the performance of the Z-Axis movement on Quick Circuit models QC5000, QC7000, QC9000, and QC12000. Outstanding Performance on Soft or Thin Substrates Minimizes Adjustments between Operations Provides precise control of Z-Axis force exerted on material Model: AIR-CYL-KIT Shipping Weight: 5lbs
Quick Circuit precision prototyping systems Multi-Layer products Multi-Layer Press Quick Plate Plating System Multi-Layer Prototype PCB 4,6 or 8 Layer Layup Kit
QUICK PRESS multi-layer press 5 ton pneumatic PCB multi-layer press Featuring: 10" X 13" Top and bottom heated platens 220V 2KW each Dual digital temperature control and automatic timers Timed heat shut-off with automatic cool down fans Easy access sliding lower heating element Provides 70 programmable presets Timer activated pressing cycle 1.5" Stroke pneumatic design Twin hand activation controls E-stop safety control
QUICK PRESS multi-layer press Designed to simplify your multi-layer prototyping process! NEW! - Completely redesigned and easy to use! Create prototype circuit boards with 2, 4, 6, or 8 layers. This multilayer press features 70 programmable presets, and custom 10" x 13" heated upper and lower platens. T-Tech designed this press to laminate 9" x 12" panels used on the QC5000 or QCJ5 series prototyping systems.
Quick Plate Thru-Hole Plating Solution T-Tech offers the Quick Plate system for Thru-hole plating of circuit board prototypes. The Quick Plate is a single chemical plating tank process for plating through the holes required for fabrication of double sided and multilayer circuit boards. The available with a maximum panel size of 9" X 12" or 12 X 18. Quick Plate can through plate a variety of substrates including FR4, FR2, Getek, and G10. Chemicals used in the Quick Plate bath have a lifespan of 5 years. A Single Bath Process Minimal Footprint for Easy fit Quick and Economical Process Minimum Maintenance
Quick Plate The through-hole plating solution Specifications QP-912 QP-PLATE-1812 PCB Panel Material Size 9 x 12 12 x 18 229 mm x 305 mm 305 mm x 457 mm System Dimensions 30 x 16 x 15 30 x 18 x 30 (L x W x H) 762 mm x 407 mm x 381 mm 762 mm x 457 mm x 762 mm Power Supply Dimensions 7 x 13 x 18 Included in System Dimensions (L x W x H) 178 mm x 330 mm x 457 mm Shipping Weight 55 Lbs. 175 Lbs. 25 Kg. 79 Kg. Smallest Plating Hole Size 0.016 0.012 0.406 mm 0.305 mm Volume of Electrolyte Solution 7.5 Gallons 20 Gallons 28.4 Liters 75.7 Liters Plating speed ½ oz./hr. @ 0.5 volts ½ oz./hr. @ 0.5 volts Average Time to Plate PCB 60 Minutes 60 Minutes Electrolyte Shelf Life 5 Years 5 Years Power Supply 110-220 Volts, 50-60 Hz. 110-220 Volts, 50-60 Hz. Compatible with: FR4, FR2, G10, PTFE, Duroid, TMM Getek, Arlon Included with the system: -Quick Plate Plating Tank and Rinse Tank -Power Supply -Conductive Ink (50g) -Copper Anode Plates and Bags -Plating Rack -Brightener -Clothing Protection Jumpsuit -Goggles and Gloves -Manuals -Squeegee and Sand Paper Duroid and TMM are trademarks of Rogers Corp. Getek is a trademark of GE Corp. Arlon is a trademark of Arlon Corp. Due to continuous improvements, specifications are subject to change without notice. The following terms are trademarks of the indicated companies: Windows, Microsoft Corp.: TMM, Duroid, Rogers Corp.; Getek, GE Corp.; Arlon, Arlon Corp.; Quick Plate, T-Tech, Inc. Copyright 1994-2009.
Multi-Layer Layup Kits QC5000 4 LAYER/4 LAYUP KIT 08 each BM-FOIL-AL-10-A [10mil Aluminum Release Foil] 08 each BM-FOIL-CU-2-A [1oz. Copper Foil (9 X 12)] 04 each BM-FR4-2DS2-A [0.031 FR4 1/1 12X9] 16 each BM-PREPR-1080-A [1080 Prepreg 9X12] 08 each BM-PREPR-7628-A [7628 Prepreg 9X12] 08 each BM-TEDLAR-10X13 [Release Film 11X14 for 9X12] QC7000 4 LAYER/4 LAYUP KIT 08 each BM-FOIL-AL-10 [10mil Aluminum Release Foil] 08 each BM-FOIL-CU-2 [1oz. Copper Foil (12 X 18)] 04 each BM-FR4-2DS2 [0.031 FR4 1/1 12X18] 16 each BM-PREPR-1080 [1080 Prepreg 12X18] 08 each BM-PREPR-7628 [7628 Prepreg 12X18] 08 each BM-TEDLAR-13X19 [Release Film 13X19 for 12X18] QC5000 6 LAYER, 4 LAYUP KIT 12 each BM-FOIL-AL-10-A [10mil Aluminum Release Foil] 12 each BM-FOIL-CU-2-A [1oz. Copper Foil (9 X 12)] 06 each BM-FR4-2DS2-A [0.031 FR4 1/1 12X9] 24 each BM-PREPR-1080-A [1080 Prepreg 9X12] 12 each BM-PREPR-7628-A [7628 Prepreg 9X12] 12 each BM-TEDLAR-10X13 [Release Film 11X14 for 9X12] QC5000 8 LAYER/LAYUP KIT 16 each BM-FOIL-AL-10-A [10mil Aluminum Release Foil] 16 each BM-FOIL-CU-2-A [1oz. Copper Foil (9 X 12)] 08 each BM-FR4-2DS2-A [0.031 FR4 1/1 12X9] 32 each BM-PREPR-1080-A [1080 Prepreg 9X12] 16 each BM-PREPR-7628-A [7628 Prepreg 9X12] 16 each BM-TEDLAR-10X13 [Release Film 11X14 for 9X12]
Quick Circuit precision prototyping systems Reflow and Laboratory Ovens Reflow SMT Reflow SMT Lab Oven Convection
Surface Mount Reflow Oven -A QP-OVEN-A This light weight, compact, stand-alone laboratory reflow oven can be used for reflowing or preheating of many different SMT components. Its reflowing process is automatically controlled by an internal microprocessor. Real time temperature is displayed on the LCD. The oven utilizes IR heating, is equipped with air cooling. The oven can be used for creating 2-sided boards. Specifications: Effective working area: 228x177mm (9"x7") Unit dimension: 300x250x160mm (12"x10"x6") Temperature: to 250 C Power: 600W, 110V, US plug Reflow cycle: 4~8 minutes
Surface Mount Reflow Oven B QP OVEN-B Features/ Specification: Working voltage: AC110V Working frequency:60hz Maximum output power: 1650W Heating methods: infrared radiation and hot air mix heating Operating system: Chinese-English operating system Working mode: automatic soldering mode, maintenance mode adjustable Temperature curve paragraph: warm-up, heating, soldering, heat preservation and cooling segment. Range of temperature and time on warm-up: 70~150, 0~5Min Range of temperature and time on heating: warm-up temperature to 250, 0~5Min Range of temperature and time on soldering: heating temperature to 300, 0~30s Range of temperature and time on heating preservation: soldering temperature -(0~50 ) Effective soldering area: 305 320mm Unit Size: 460 372 275mm Even temperature distribution. CPU closed loop temperature control, digital display, zero Voltage heater switching. Dedicated power and heating switches. ESD safe. External temperature calibration. Hinged hood creates an oven like environment for reflow. Two heating states optional (Pre-heating & reflow)
Laboratory Oven C This gravity convection oven is designed to meet the laboratory needs of industry, research organizations and schools. Well-crafted and versatile, it can be used for drying, baking, sterilizing, evaporating, heat treating, annealing and testing. The Durable exterior has a hard, scratch-resistant hammer finish. Doors open with high impact thermoplastic handles. Engineered with a Heavy steel double-wall cabinet. Work space is insulated from the outer cabinet with one inch of high density mineral wool, and interiors are made of corrosive-resistant aluminized steel. Crafted with UL and CSA recognized components. The control panel is equipped with an illuminated ON-OFF rocker switch and a heat/cycle pilot light Temperature is controlled by an automatic Hydraulic thermostat. Energy efficient, low-watt density sheathed elements are engineered into a compact design for quick run-up and recovery times. Temperature uniformity is greatly improved by a perforated heat shield which absorbs radiant heat and distributes it evenly. Specifications: Min Temperature 5 C / 41 F Max Temperature 225 C / 437 F Volume 1.27 cu. ft. / 36 L Chamber Dimensions (W x H x D) 13 x 13 x 13" / 33 x 33 x 33 cm Power 115 V / 6.95 A / 800 W Type of Thermostat Hydraulic Operating Temperature Range Ambient +5 to 225 C / Ambient +9 to 437 C Shelves Included/Maximum (1" Centers) 3 (1 Fixed, 2 Adjustable)/13 Maximum weight per shelf 35 lbs. Overall Dimensions (W x H x D) 15 x 21 x 15" / 38 x 54 x 38 cm Shipping Weight 59 lb. / 27.7 k Order T-Tech Part Number: QP-LAB-OVEN-C
Quick Circuit precision prototyping systems Quick Circuit Enclosures and Stands QCJ5 Series Stand/Storage Quick Circuit Stand/Storage QC3000 QC5000 QC7000 QC9000 QC12000 Quick Circuit Enclosure Stand QC3000 Quick Circuit Sound Enclosure QC3000 QC5000 QC7000 QC9000 QC12000
QCJ5 Stand and Storage NEW! - The QCJ5 Stand is specifically designed to provide the perfect work space for your QCJ5 system. It also doubles as a storage space for T-Tech s compact and ultra-quite air compressor, the Dual HEPA vacuum and your tools and materials. Model: OA-STAND-QCJ5 Shipping Weight: 125lbs
Quick Circuit Stand and Storage NEW! - The Quick Circuit Stand is specifically designed to provide the perfect work space for your Quick Circuit prototyping system. It also doubles as a storage space for T-Tech s compact and ultra-quite air compressor, the HEPA vacuum and your tools and materials. Model: OA-SE-STAND Shipping Weight: 125lbs
Quick Circuit Model 3000 Enclosure Stand and Storage Combination NEW! - The Quick Circuit QC3000 Enclosure Stand and Storage unit is specifically designed to provide the perfect work space for your Quick Circuit Model QC3000 prototyping system. It also doubles as a storage space for T-Tech s HEPA vacuum and your tools and materials. Model: Model: OA-SE-3000 Shipping Weight: 155lbs
Quick Circuit Sound Enclosures Tech Sound Enclosures encapsulate the Quick Circuit prototyping system with sound dampening acoustical foam, allowing you to comfortably create your prototype circuits in an office environment. T-Tech sound enclosures are tested with a db meter and measure less than 60 db at a distance of three feet from the Quick Circuit system while the Quick Circuit system is in use. Available for Quick Circuit Models: Model QC5000 QC7000 QC9000 QC12000 Part Number OA-SE-5000 OA-SE-9000 OA-SE-9000 OA-SE-12000 Our optional Quick Circuit stand is designed to hold all your Quick Circuit Parts, Tools and Accessories such as: HEPA Vacuum, Shear, Controller and more.
Quick Circuit precision prototyping systems HEPA Vacuums & Filters Dual Hepa Vacuum 115V/ 230V Single Hepa Vacuum 115V / 230V T-Tech Hepa Vacuum Bags T-Tech HEPA Replacement Filters
OA-VAC-DUAL-115 / OA-VAC-DUAL-230 REPLACEMENT BAGS / FILTERS T-Tech HEPA Vacuum Bags Filter bags for T-Tech vacuum.. Model: OA-VAC-HEPA-BAG-T 5 bags per package SPECIFICATIONS T-Tech HEPA Filter HEPA filter for T-Tech vacuums Model: OA-VAC-HEPA-FIL-T DESCRIPTION: T-TECH DUAL HEPA 115/230 VOLT VACUUM DIMENSIONS: 20 X 12 X 14 (50cm x 30cm x 35cm) MULTI FILTER: 1 st stage vacuum bag - multi-layered, disposable, expands to 11 x 12 x 3 (396 cubic in.) 2 nd stage HEPA Filter smallest particle filtration (0.3submicron) System SOUND LEVEL: 62dBA SEALED VAC. INCH: 91.2 AIR WATTS: 245 AIR FLOW CFM: 95 Volts: 120 or 240 Watts: 850
OA-VAC-SINGLE-115 / OA-VAC-SINGLE-230 REPLACEMENT BAGS / FILTERS T-Tech HEPA Vacuum Bags Filter bags for T-Tech vacuum.. Model: OA-VAC-HEPA-BAG-T 5 bags per package T-Tech HEPA Filter HEPA filter for T-Tech vacuums Model: OA-VAC-HEPA-FIL-T SPECIFICATIONS DESCRIPTION: T-TECH HEPA 115/230 VOLT VACUUM DIMENSIONS: 10 X 12 X 14 (25cm x 30cm x 35cm) MULTI FILTER: 1 st stage vacuum bag - multi-layered, disposable, expands to 11 x 12 x 3 (396 cubic in.) 2 nd stage HEPA Filter smallest particle filtration (0.3submicron) System SOUND LEVEL: 62dBA SEALED VAC. INCH: 91.2 AIR WATTS: 245 AIR FLOW CFM: 95 Volts: 120 or 240 Watts: 850
Quick Circuit precision prototyping systems Air Compressor Air Compressor Ultra-Quiet Suitable for all Quick Circuits requiring compressed air
QC-Compressor ultra-quiet compressor This incredibly quiet and affordable oil free air compressor is an ideal solution for Quick Circuit customers who require localized compressed air. The Ultra-Quiet 1 HP motor generates ample pressure and C.F.M. to operate all Quick circuit models, including the popular QCJ5 automated prototyping system. Compressor is equipped with external dryer/filter. Air Compressor: Oil Free Motor: 1 HP Ultra Quiet Power: 850W Psi: 115 Tank: 10 Gallons / 38 Liters Maximum pressure(mpa): 0.8 Starting pressure (Mpa): 0.5 Noise(dB): 50 Speed (r/min): 1680 Capacity: 43.5 (Gallons/Min), 165 (Liters/min): C.F.M.: 5.8 Bar: 8 Weight: 77.0 Lbs / 35KG Dimensions: 15.75in x 15.57in x 26.0in / 40cm x 40cm x 66cm External Dryer: Impurities Filtration 5 Micron, Oil Filtration 5PPM, Maximum temperature 149F / 65C, General differential pressure 0.2KG/CM2, Maximum pressure difference 0.7KG/CM2
Quick Circuit precision prototyping systems Quick Circuit Tools and Materials Board Material Material Kits Drill Bits Endmills Contour Routers T-Milling Tools Tool Kits
FR4 31 mil thickness (.031) size (in.) copper (oz.) part # 12 x 18.5.5 BM-FR4-1DS2 9 x 12.5.5 BM-FR4-1DS2-A 12 x 18.5 0 BM-FR4-1SS2 12 x 18 1 1 BM-FR4-2DS2 9 x 12 1 1 BM-FR4-2DS2-A 12 x 18 1 0 BM-FR4-2SS2 31 mil thickness (.031) solder plated size (in.) copper (oz.) part # 12 x 18.5.5 BM-SP-1DS2 12 x 18.5 0 BM-SP-1SS2 12 x 18 1 1 BM-SP-2DS2 9 x 12 1 1 BM-SP-2DS2-A 12 x 18 1 0 BM-SP-2SS2 59 mil thickness (.059) board material 1.800.370.1530 www.t-tech.com size (in.) copper (oz.) part # 12 x 18.5.5 BM-FR4-1DS 9 x 12.5.5 BM-FR4-1DS-A 12 x 18.5 0 BM-FR4-1SS 9 x 12.5 0 BM-FR4-1SS-A 12 x 18 1 1 BM-FR4-2DS 9 x 12 1 1 BM-FR4-2DS-A 12 x 18 1 0 BM-FR4-2SS 9 x 12 1 0 BM-FR4-2SS-A 12 x 18 2 2 BM-FR4-3DS 9 x 12 2 2 BM-FR4-3DS-A 12 x 18 2 0 BM-FR4-3SS 9 x 12 2 0 BM-FR4-3SS-A
1.800.370.1530 www.t-tech.com FR4 59 mil thickness (.059) solder plated size (in) copper (oz.) part # 12 x 18.5.5 BM-SP-1DS 9 x 12.5.5 BM-SP-1DS-A 12 x 18.5 0 BM-SP-1SS 9 x 12.5 0 BM-SP-1SS-A 12 x 18 1 1 BM-SP-2DS 9 x 12 1 1 BM-SP-2DS-A 12 x 18 1 0 BM-SP-2SS 9 x 12 1 0 BM-SP-2SS-A 12 x 18 2 2 BM-SP-3DS 9 x 12 2 2 BM-SP-3DS-A 12 x 18 2 0 BM-SP-3SS Other Sizes size (in.) Copper (oz.) Part # 12 x 18 1 1 BM-FR4-2DS4 12 x 18 1 1 BM-FR4-2DS3 12 x 18 3 3 BM-FR4-4DS Entry Material size (in.) type part # 12 x 18 regular BM-ENTRY 9 x 12 regular BM-ENTRY-2 12 x 18 adhesive BM-ENTRY-AD 9 x 12 adhesive BM-ENTRY-AD-2 Backup Material size (in.) type part # 12 x 18 regular BM-BACKUP 9 x 12 regular BM-BACKUP-2 12 x 18 adhesive BM-BACKUP-AD 9 x 12 adhesive BM-BACKUP-AD-2 board material
1.800.370.1530 www.t-tech.com size in. mm. part # 8.3 mil.0083.2032 DB-0083 10 mil.0100.2540 DB-0100 13 mil.0130.3302 DB-0130 13.5 mil.0135.3429 DB-0135 13.8 mil.0138.3500 DB-0138 14.5 mil.0145.3683 DB-0145 15.6 mil.0156.3962 DB-0156 15.8 mil.0158.4000 DB-0158 16 mil.0160.4064 DB-0160 17.7 mil.0177.4500 DB-0177 18 mil.0180.4572 DB-0180 19.7 mil.0190.5000 DB-0197 20 mil.0200.5080 DB-0200 21 mil.0210.5334 DB-0210 21.7 mil.0217.5511 DB-0217 22.5 mil.0225.5715 DB-0225 23.6 mil.0236.5994 DB-0236 24 mil.0240.6096 DB-0240 25 mil.0250.6350 DB-0250 25.6 mil.0256.6502 DB-0256 26 mil.0260.6604 DB-0260 27.6 mil.0276.7010 DB-0276 28 mil.0280.7500 DB-0280 29.2 mil.0292.7416 DB-0292 29.5 mil.0295.7493 DB-0295 31 mil.0310.7874 DB-0310 31.5 mil.0315.8000 DB-0315 32 mil.0320.8128 DB-0320 33 mil.0330.8382 DB-0330 33.5 mil.0335.8500 DB-0335 35 mil.0350.8890 DB-0350 35.4 mil.0354.9000 DB-0354 36 mil.0360.9144 DB-0360 37 mil.0370.9398 DB-0370 37.4 mil.0374.9500 DB-0374 38 mil.0380.9652 DB-0380 39 mil.0390.9906 DB-0390 39.4 mil.0394 1.000 DB-0394 40 mil.0400 1.016 DB-0400 :: drill bit kit AS-KIT-DRILL 2 of each.018.020.025.032.040 drill bits
1.800.370.1530 www.t-tech.com size in. mm. part # 41 mil.0410 1.041 DB-0410 41.3 mil.0413 1.049 DB-0413 42 mil.0420 1.067 DB-0420 43 mil.0430 1.092 DB-0430 43.3 mil.0433 1.100 DB-0433 45.3 mil.0453 1.150 DB-0453 46.5 mil.0465 1.180 DB-0465 46.9 mil.0469 1.190 DB-0469 47.2 mil.0472 1.200 DB-0472 49.2 mil.0492 1.250 DB-0492 51.2 mil.0512 1.300 DB-0512 52 mil.0520 1.320 DB-0520 53.1mil.0531 1.349 DB-0531 55 mil.0550 1.397 DB-0550 55.1 mil.0551 1.399 DB-0551 57.1 mil.0571 1.450 DB-0571 59.1 mil.0591 1.500 DB-0591 59.5mil.0595 1.511 DB-0595 61 mil.0610 1.550 DB-0610 62.5 mil.0625 1.587 DB-0625 63 mil.0630 1.600 DB-0630 63.5 mil.0635 1.613 DB-0635 65 mil.0650 1.650 DB-0650 66.9 mil.0669 1.699 DB-0669 67 mil.0670 1.702 DB-0670 68.9 mil.0689 1.750 DB-0689 70 mil.0700 1.778 DB-0700 70.9 mil.0709 1.800 DB-0709 72.8 mil.0728 1.849 DB-0728 73 mil.0730 1.854 DB-0730 74.8 mil.0748 1.899 DB-0748 76 mil.0760 1.930 DB-0760 76.8 mil.0768 1.950 DB-0768 78.1 mil.0781 1.983 DB-0781 78.5 mil.0785 1.993 DB-0785 78.7 mil.0787 1.998 DB-0787 80.7 mil.0807 2.050 DB-0807 81 mil.0810 2.057 DB-0810 82 mil.0820 2.082 DB-0820 :: drill bit kit AS-KIT-DRILL 2 of each.018.020.025.032.040 drill bits
1.800.370.1530 www.t-tech.com size in. mm. part # 82.7 mil.0827 2.802 DB-0827 84.6 mil.0846 2.150 DB-0846 86 mil.0860 2.184 DB-0860 86.6 mil.0866 2.200 DB-0866 89 mil.0890 2.260 DB-0890 90.6 mil.0906 2.300 DB-0906 92.5 mil.0925 2.349 DB-0925 93.5 mil.0935 2.374 DB-0935 93.8 mil.0938 2.328 DB-0938 94.5 mil.0945 2.400 DB-0945 96 mil.0960 2.438 DB-0960 96.5 mil.0965 2.451 DB-0965 98 mil.0980 2.489 DB-0980 98.4 mil.0984 2.499 DB-0984 99.5 mil.0995 2.527 DB-0995 100.4 mil.1004 2.550 DB-1004 101.5 mil.1015 2.578 DB-1015 102.4 mil.1024 2.600 DB-1024 104 mil.1040 2.550 DB-1040 104.3 mil.1043 2.650 DB-1043 106.3 mil.1063 2.700 DB-1063 106.5 mil.1065 2.705 DB-1065 108.3 mil.1083 2.750 DB-1083 109.4 mil.1094 2.790 DB-1094 110 mil.1100 2.794 DB-1100 110.2 mil.1102 2.799 DB-1102 111 mil.1110 2.819 DB-1110 112.2 mil.1122 2.849 DB-1122 113 mil.1130 2.870 DB-1130 114.2 mil.1142 2.900 DB-1142 116 mil.1160 2.946 DB-1160 116.1 mil.1161 2.948 DB-1161 118.1 mil.1181 2.990 DB-1181 120 mil.1200 3.050 DB-1200 120.1 mil.1201 3.050 DB-1201 122 mil.1220 3.098 DB-1220 124 mil.1240 3.140 DB-1240 125 mil.1250 3.175 DB-1250 126 mil.1260 3.200 DB-1260 141.7 mil.1417 3.590 DB-1417 :: drill bit kit AS-KIT-DRILL 2 of each.018.020.025.032.040 drill bits
1.800.370.1530 www.t-tech.com item in. mm. part # 4 mil.0040.1016 EM-0040-2S 5 mil.0050.1270 EM-0050-2S 6 mil.0060.1524 EM-0060-2S 7mil.0070.1778 EM-0070-2S 8 mil.0080.2032 EM-0080-2S 9 mil.0090.2286 EM-0090-2S 9.8 mil.0980.2489 EM-0098-2S-MM 10 mil.0100.2540 EM-0100-2S 11 mil.0110.2794 EM-0110-2S 12 mil.0120.3408 EM-0120-2S 15 mil.0150.3810 EM-0150-2S 19.7 mil.0197.5003 EM-0197-2S-MM 20 mil.0200.5080 EM-0200-2S 25 mil.0250.6350 EM-0250-2S 29.5 mil.0295.7493 EM-0295-2S-MM 31 mil*.0310.7874 EM-0310-2R 31 mil.0310.7923 EM-0310-2S 39.4 mil*.0394 1.000 EM-0394-2R-MM 39.4 mil.0394 1.000 EM-0394-2S-MM 40 mil.0400 1.016 EM-0400-2S 50 mil*.0500 1.270 EM-0500-2R 50 mil.0500 1.270 EM-0500-2S 62.5 mil*.0625 1.587 EM-0625-2R 80 mil.0800 2.032 EM-0800-2S 125 mil*.1250 3.175 EM-1250-2R * Denotes regular flute length versus stub :: endmill kit AS-KIT-ENDMILL 2 of each.008,.010,.015,.020,.031 end mills
item mm. part # 31 mil Chipbreaker Contour Router.7874 CR-0310-R2 62 mil Chipbreaker Contour Router 1.574 CR-0620-R2 31 mil Fiberglass Contour Router.7874 CR-0310-R1 62mil Fiberglass Contour Router 1.574 CR-0620-R1 routers 31 mil Fishtail Contour Router.7874 CR-0310-F2 62 mil Fishtail Contour Router 1.574 CR-0620-F2 :: router kit AS-KIT-ROUT 3 of each 62 mil fiberglass, 62 mil chipbreaker 2 of each 31 mil fiberglass, 31 mil chipbreaker 1.800.370.1530 www.t-tech.com item path size (mil) part # T1 8-12 MILL-T1 T2 10-12 MILL-T2 T3 8-14 MILL-T3 T4 4-6 MILL-T4 T5 6-10 MILL-T8 :: t tool kit AS-KIT-MILL 2 of each T1, T2, T3, T4, T5 t tools
item part # QC 5000 MATERIALS KIT AS-KIT-5000M QC 7000 MATERIALS KIT AS-KIT-7000M QC 9000 MATERIALS KIT AS-KIT-9000M DRILL BIT KIT AS-KIT-DRILL END MILL KIT AS-KIT-EMILL ROUTER KIT AS-KIT-ROUTER T Tool Kit AS-KIT-MILL RF MICROWAVE TOOL KIT AS-KIT-RF/MW STANDARD PACKAGE OF AS-KIT-STD MATERIALS.8 MM THRU HOLE KIT TH-KIT-08MM 1.0 MM THRU HOLE KIT TH-KIT-10MM 1.2 MM THRU HOLE KIT TH-KIT-12MM kits 1.800.370.1530 www.t-tech.com item part # IsoPro 2.6 1 Seat OA-ISO-PRO IsoPro Upgrade OA-ISOPRO-UP IsoPro 2.6 DXF OA-ISOPRO-DXF IsoPro additional seats OA-ISOPRO-2 IsoPro 2.6 Network version OA-ISOPRO-NET-X DXF to Gerber conversion OA-D2G ::USB retro kit USB-RETRO Upgrade your current controller to be USB compatible and get IsoPro 2.6. software
item part # Quick Plate 18x12 QP-1812 Quick Plate 9x12 QP-912 5 gal. of mixed electroloyte QP-ELECTROLYTE-5 10 gal. of mixed electrolyte QP-ELECTROLYTE-10 20 gal. of mixed electrolyte QP-ELECTROLYTE-20 Quick Plate Conductive Ink (25g) QP-INK-25 Quick Plate Conductive Ink (50g) QP-INK-50 Copper Brightener QP-BRIGHT-250ML Copper Brightener QP-BRIGHT-500ML Replacement Anode Assembly QP-ANODERPL1812 Replacement Anode Assembly QP-ANODERPL912 Quick Plate 1.800.370.1530 www.t-tech.com item part # 32-Pin Socket Sip TH-SIP-32 Via Pins: OD = 0.8mm (.032 ) TH-VIA-032P Via Insertion Hand Tool 0.8mm (.032 ) TH-VIA-HT032 Eyelets.030 OD/.020 ID (SOLDER PLATED) TH-EYE-030 Eyelets.039 OD/.030 ID (SOLDER PLATED) TH-EYE-039 Eyelets.047 OD/.037 ID (SOLDER PLATED) TH-EYE-047 Eyelet Hand Tool.030 OD (0.75mm) TH-EYE-HT-030 Eyelet Hand Tool.039 OD (1.00mm) TH-EYE-HT-039 Eyelet Hand Tool.047 OD (1.20mm) TH-EYE-HT-047 Thru Hole
new system item part # Hepa Vacuum 115v HepaVac115 Hepa Vacuum 230v HepaVac230 Replacement bags HepaVac Bag Replacement filter HepaVac Filter EuroClean Filter OA-VAC-HEPA-FIL EuroClean Bags OA-VAC-HEPA-BAG Nilfisk GS 80 HEPA filter OA-VAC-HEPA Nilfisk GS 80 Micro filter OA-VAC-MCF Nilfisk GS 80 Main filter OA-VAC-FILTER Nilfisk GS 80 Bags OA-VAC-BAG 1.800.370.1530 www.t-tech.com old systems vacuum