Yamaha R 007/008/009 R6 006/007/008 Plug&Play kit user manual
INDEX Introduction... Chapter Plug&Play kit content.... Part numbers... 8 Chapter Plug&Play kit installation... 9. Installation on Yamaha R 007/008 R6 006/007/008... 9. Installation on Yamaha R 009... 0 Chapter MXL and Yamaha connectors pinout.... MXL & Yamaha R 007/08 R6 006/07/08 AMP connectors pinout.... MXL AMP and Yamaha R 009 JAE connectors pinout... Chapter First start up... Chapter 5 Calibration, gear calculation, data download and analysis... 5 Chapter 6 Error codes... 6 Appendix Wirings and pinout... 7
Presentation AIM: a world leader in data acquisition for racing applications. Established in 976, AIM is now world leader in the production of high performances data loggers for racing applications: dashboards, data loggers, digital displays, lap timers. AIM set new standards in various motor sports: from karts to bikes, Dragsters, Formula Boat, Offshore and even snowboard! AIM products merge the functionalities of traditional tachometers, RPM indicators, temperature, pressure and lap timer, with compact units, high performing and easy to use. Different product for different applications but with one shared characteristic: the great innovation. Each AIM system is completely designed, realised and tested by its technicians. The research and development board includes electronic and mechanical engineers, physics and other specialists that develop firmware, software, hardware and the related documentation. Our reputation is build on quality products, innovative technology and on the steady engagement in customer support.
0Introduction MXL Plug&Play kit for Yamaha R/R6 is the dashboard (with integrated data logger in Pista version) designed for an easy and quick installation: with the minimum effort it is possible to connect directly with the bike Engine Control Unit (ECU) and see (with no need of additional sensors): RPM Speed Engaged gear (calculated) Water temperature Air temperature Oil level fuel level Turning lights signal High beam signal Neutral signal Battery charge level The logger, like the stock dash, is powered by the bike master switch. MXL Strada, Pista kits for Yamaha have been developed for the following bike models: Model Year 006 Year 007 Year 008 Year 009 R R6 = supported = not supported Note: thanks to the infrared transmitter/receiver (included in MXL Pista kit, optional in MXL Strada one), it is possible to see/record lap times. Moreover MXL Pista, allows to manage and record data coming from 5 additional configurable channels (e.g. suspension potentiometer, throttle sensor, pressure sensor, brake, etc ). For any additional information not explicitly explained in this tutorial refer to MXL and/or Race Studio Configuration user manuals.
Chapter Plug&Play kit content Plug&Play kit content for Yamaha changes according on MXL model and on the bike year of production. In the image here below kit components are numbered for more clarity. MXL Strada Plug&Play kit for Yamaha R 007/008 and Yamaha R6 006/007/008: N. MXL Strada (); N. wiring for MXL Strada pins AMP connector (); N. Yamaha bracket kit () made up of: n bracket; n washers; n M*8 Phillips head screws; n M5*8 Phillips head screws; N. USB Cable (); N. Race Studio Software Cd (5); This user manual + MXL user manual (6). Note: before installing the kit check that it contains all specified items.
MXL Pista Plug&Play kit for Yamaha R 007/008 and Yamaha R6 006/007/008: N. MXL Pista (); N. Wiring for MXL Pista AMP pins connector (); N. Infrared receiver with 90cm cable (); N. Infrared transmitter (); N. Transmitter external power cable (5); N. Yamaha bracket kit (6) made up of: n bracket; n washers; n M*8 Phillips head screws; n M5*8 Phillips head screws; N. USB Cable (7); N. Race Studio Software Cd (8); This user manual + MXL user manual (9). Note: before installing the kit check that it contains all specified items. 5
MXL Strada Plug&Play kit for Yamaha R 009: N. MXL Strada (); N. wiring for MXL Strada pins AMP connector (); N. Adapter cable for Yamaha R 009 (); N. Yamaha bracket kit () made up of: n bracket; n washers; n M*8 Phillips head screws; n M5*8 Phillips head screws; N. USB Cable (5); N. Race Studio Software Cd (6); This user manual + MXL user manual (7). Note: before installing the kit check that it contains all specified items. 6
MXL Pista for Yamaha R 009 kit: N. MXL Pista (); N. Wiring for MXL Pista AMP pins connector (); N. Adapter cable for Yamaha R 009 (); N. Infrared receiver with 90cm cable (); N. Infrared transmitter (5); N. Transmitter external power cable (6); N. Yamaha bracket kit (7) made up of: n bracket; n washers; n M*8 Phillips head screws; n M5*8 Phillips head screws; N. USB Cable(8); N. Race Studio Software CD (9); This user manual + MXL user manual (0). Note: before installing the kit check that it contains all specified items. 7
0. Part numbers Plug&Play kit MXL Strada for Yamaha R 07/08 R6 06/07/09: code X5MXLSYR05; Plug&Play kit MXL Strada for Yamaha R 09: code X5MXLSYR09; Plug&Play kit MXL Pista for Yamaha R 07/08 R6 06/07/08: code X5MXLCYR05; Plug&Play kit MXL Pista for Yamaha R 09: code X5MXLCYR09. MXL Strada/Pista for Yamaha R 009 adapter cable (to switch from a Yamaha R 007/008 Plug&Play kit to a Yamaha R 009 Plug&Play kit): code V05570. Optional to all MXL Strada Yamaha kits: Infrared receiver: code XRX090; Infrared transmitter: code X0TXKMA0; Infrared transmitter power cable: V0POWTX0; Spare parts Braket kit for Yamaha R 007/008 and Yamaha R6 006/007/008: DNKTSTMXLY Bracket kit for Yamaha R 009: DNKTSTMR09 Cable for pin AMP connector for MXL Strada: V0.55.5 Cable for pin AMP connector for MXL Pista: V0.55. 8
Chapter Plug&Play kit installation MXL Plug and Play kit for Yamaha R/R6 is expressly designed and developed to guarantee the maximum installation ease. WARNING: this kit has been properly tested to guarantee total compatibility with a bike entirely according to the stock one sold by the mother house. Through the fixing points on the back of the logger the stock dash can be easily and quicly substituted with no need of bending or drilling anything: each component is just Plug&Play. The system is to be connected to the high beam chassis using the bracket included in the kit. The bracket is in black anodised aluminium lightweight and mechanically resistant. GENERAL NOTES Read these notes before installing the system. Do not cut any cable: the wiring supplied with the kit is Plug&Play; be careful not to damage the stock connectors while plugging/unplugging them; do not install the system when the engine is hot; be careful not to lose screws and washers. 8. Installation on Yamaha R 007/008 R6 006/007/008 Once the stock dash removed: fix MXL to the bracket through the four fixing points highlighted in the image here below; connect the wiring to the connectors as explained here below. 9
. Installation on Yamaha R 009 Once the stock dash removed: fix MXL to the bracket using the fixing points highlighted here above; connect pins AMP connector (on the left in the image here above) to the AMP harness included in the kit; insert AIM adapter (included in the kit) between right MXL connector highlighted here above and the stock connector. 0
Chapter MXL and Yamaha connectors pinout Up to 008 Yamaha bikes used a 6 pins AMP female connector for both R and R6 while starting from 009 Yamaha R mounts a 0 pins JAE male connector. 9. MXL & Yamaha R 007/08 R6 006/07/08 AMP connectors pinout The image here below shows MXL AMP connectors and their pinout. Pinout of MXL AMP pins connector ( A ) Pinout of MXL AMP 6 pins connector ( B ) A A A A 5A 6A 7A 8A 9A 0A A A Analog input 0 (free) +VB GND Lap (optical) +Vref GND Analog input 6 (free) Analog input 5 (free) Analog input 7 (free) Analog input 9 (free) +Vref GND B B B B 5B 6B 7B 8B 9B 0B B B B +Vb +Vb EXT GND not used not used K-Line oil level RPM +Vb Hi-beam turning light Fuel turning light B P 5B P 6B Neutral Here below is shown Yamaha AMP female connector and its wire colours.
. MXL AMP and Yamaha R 009 JAE connectors pinout To connect Yamaha R 009 JAE 0 pins male connector to MXL AMP 6 pins female one it is necessary to use the adapter cable shown here below. 5 6 7 8 9 0 5 6 MXL AMP 6 pins female connector pinout +Vb +Vb EXT GND not used not used K-Line oil level switch RPM +Vb Hi-beam turning light Fuel level alarm turning light P P Neutral 5 6 7 8 9 0 5 6 7 8 9 0 Yamaha R-009 JAE 0 pins male connector pinout Not used Turn left Not used Not connected Oil level switch RPM 6 th gear 5 th gear th gear rd gear Hi-beam Turn right Vb dir Vb key Fuel level alarm GND immobilizer led K line st gear nd gear
Chapter First start up MXL for Yamaha R/R6 can be installed both on a stock bike and on bikes equipped with original YEC (Yamaha Engineering Corporation) kit. Once the bike started, MXL automatically recognizes and shows the kind of ECU installed. ECU MXL can manage: Standard ECU (stock ECU): the display shows ECU MODEL STD (image below on the left); YEC kit (YEC ECU): the display shows ECU MODEL KIT (image below on the right). Once the ECU identified, MXL shows and manages, as default settings, different information according on MXL model. MXL STRADA RPM from the ECU Shown Rear wheel speed from the ECU Shown Water temperature from the ECU Shown + alarm LED Air temperature from the ECU Shown + alarm LED Oil level from sensors Alarm LED Fuel level alarm from sensors Alarm LED Turning lights from sensors Alarm LED High beam from sensors Alarm LED Engaged gear (Neutral included) automatically calculated Shown Yamaha error codes from the ECU Availables RPM data can be sampled both by the bike ECU and by a stock sensor. To use the data coming from the ECU set RPM box in MXL system configuration layer on ECU ; to use the data coming from the stock sensor set RPM box in MXL system configuration layer on AIM sensor. Refer to Race Studio Configuration user manual for further information concerning MXL configuration. In case a deep analysis of RPM channel is wished use data coming from the stock sensor (set AIM sensor ) whose sampling frequency is higher. Yamaha_ERR channel is not shown by the default configuration. To see it on MXL display configure the logger using Race Studio Configuration software. Refer to Race Studio Configuration user manual for further information concerning MXL channels configuration.
MXL PISTA RPM from the ECU Shown and recorded Rear wheel speed from the ECU Shown and recorded Water temperature from the ECU Shown and recorded + alarm LED Air temperature from the ECU Shown and recorded + alarm LED Oil level from the sensors Alarm LED Fuel alarm from the sensors Alarm LED Turning lights from the sensors Alarm LED High beam from the sensors Alarm LED Engaged gear (Neutral included) calculated Shown and recorded Yamaha error codes from the ECU Alarm LED Availables RPM data can be obtained both from the bike ECU and from a stock sensor. To use the data coming from the ECU set RPM box in MXL system configuration layer on ECU ; to use the data coming from the stock sensor set RPM box in MXL system configuration layer on AIM sensor. Refer to Race Studio Configuration user manual for further information concerning MXL configuration. In case a deep analysis of RPM channel is wished use data coming from the stock sensor (set AIM sensor ) whose sampling frequency is higher. Yamaha_ERR channel is not shown by the default configuration. To see it on MXL display configure the logger using Race Studio Configuration software. Refer to Race Studio Configuration user manual for further information concerning MXL channels configuration.
5Chapter 5 Calibration, gear calculation, data download and analysis MXL Strada/ Pista can show engaged gear number on the display. Warning: for MXL to correctly show the engaged gear, Gear calibration procedure needs to be performed. Refer to MXL user manual to know how to perform it. In case crown/pinion ratio is modified new calibration and gear computation are needed. Refer to Race Studio Configuration user manual for further information concerning the gear sensor calibration and the gear computation. MXL can be configured only using a PC and Race Studio software (included in the kit). To connect MXL to the PC use the proper USB cable that comes with the kit. For any further information concerning Race Studio software installation and working mode refer to the related user manual. Once a test session is over it is possible to download data recorded by the logger (MXL Pista only) and save them in a database integrated in Race Studio software. For further information concerning data download refer to Race Studio Configuration user manual. 5
6Chapter 6 Error codes Yamaha ECUs offer a diagnostic function of the errors that can occur on the bike. The table here below shows the meaning of the different error codes (YAMAHA_ERR channel): Cam shaft sensor problem Driving shaft sensor problem,,0, Air pressure sensor problem 5,6 Throttle position sensor problem 7,8 EXUP engine valve problem 9 Side stand sensor problem Water temperature sensor problem Intake air temperature sensor problem 0, Roll over sensor problem Ignition coil # problem Ignition coil # problem 5 Ignition coil # problem 6 Ignition coil # problem Speed sensor or neutral (N) switch sensor problem,6 Injection system problem 7 EXUP valve position problem 8 EXUP servomotor problem 50 Internal ECU problem Warning: refer to Yamaha and YEC official documentation for the complete description of the errors. In case diagnostic function detects more than one error, YAMAHA_ERR channel shows error codes in sequence. 6
7Appendix Wirings and pinout N. rev. / Rev. N. Descrizione / Description Data / Date Firma / Signature Contr. da / Ckd. by MXL Strada Plug&Play Yamaha R 007/008 - R6 006/007/008 optical lap cable AMP pins female connector N. - pins Binder 79 female connector 6 5 0 9 8 7 AMP pins female connector pinout contact insertion view pins Binder 79 female connector pinout Solder termination view Binder 79 connector table Channel Binder pin Cable colour AMP pins pin Connection Lenght LAP white black red bleu Lap in Analogic GND +Vp Lap in 0 mm Rif. / Ref. Q.tà/Q.ty Material / Material N. articolo / Item N. Progettato da / Designed by Contr. da / Ckd. by Approvato da / Approved by Nome file / File name Data / Date Scala / Scale L.I. Titolo / Title Cavo Lap ottico MXL Strada per Plug&Play Yamaha R 007/008 - R6 006/007/008 Racing Data Power N. disegno / Drawing N. Rev. / Rev. Foglio / Sheet 0.55.5 of 7
N. rev. / Rev. N. Descrizione / Description Data / Date Firma / Signature Contr. da / Ckd. by MXL Pista Plug&Play for Yamaha R 007/008 - R6 006/007/008 cable AMP pins female connector 6 Binder 79 pins female connector 6 5 0 9 8 7 pins AMP female connector pinout Contact insertion view pins Binder 79 female connector pinout Solder termination view Rif. / Ref. Q.tà/Q.ty Material / Material N. articolo / Item N. Progettato da / Designed by Contr. da / Ckd. by Approvato da / Approved by Nome file / File name Data / Date Scala / Scale Titolo / Title Cavo MXL Pista per Plug&Play Yamaha R 007/008 - R6 006/007/008 Racing Data Power N. disegno / Drawing N. Rev. / Rev. Foglio / Sheet 0.55. of 8
N. rev. / Rev. N. Descrizione / Description Data / Date Firma / Signature Contr. da / Ckd. by Binder 79 connector table Channel Binder pin cable colour AMP pins pin Connection Lenght Ch. 5 White black n.c. bleu 8 6 5 Analog input 5 Analog GND V reference 0 mm Ch. 6 White black n.c. bleu 7 6 5 Analog input 6 Analog GND V reference 0 mm Ch. 7 White black n.c. bleu 9 Analog input 7 Analog GND V reference 80 mm Ch. 9 White black red bleu 0 Analog input 9 Analog GND + VB V reference 80 mm Ch. 0 / Gyro White black red bleu Analog input 0 Analog GND + VB V reference 0 mm Lap White black red bleu Lap in Analog GND + VB Lap in 0 mm Rif. / Ref. Q.tà/Q.ty Material / Material N. articolo / Item N. Progettato da / Designed by Contr. da / Ckd. by Approvato da / Approved by Nome file / File name Data / Date Scala / Scale Titolo / Title Cavo MXL Pista per Plug&Play Yamaha R 007/008 - R6 006/007/008 Racing Data Power N. disegno / Drawing N. Rev. / Rev. Foglio / Sheet 0.55. of 9
N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by MXL Strada/Pista adapter cable for Yamaha YZF-R 009 AMP 6 pin female connector JAE 0 pin male connector 6 6 8 8 7 6 5 6 5 0 9 7 5 8 6 0 0 9 8 7 0 9 8 7 6 6 5 5 AMP 6 pin female connector pinout Contact insertion view 5 JAE 0 pin male connector pinout Solder termination view N.B.: insulate unemployed pins of JAE connector Rif. / Ref. Q.tà / Q.ty Materiale / Material N. articolo / Item N. Progettato da / Designed by Contr. da / Ckd. by Approvato da / Approved by Nome file / File name Data / Date L.I. Scala / Scale Titolo / Title Cavo adattatore MXL Strada/Pista per Yamaha YZF-R 009 Racing Data Power N. disegno / Drawing N. 0.55.7 Rev. / Rev. Foglio / Sheet of 0