Tipper Trailer S.KI Configurator Trailer Services Technology
Your tipper trailer individually assembled Using this brochure you will be able to configure precisely the tipper trailer which meets your requirements and concepts in respect of body, chassis and running gear right through to accessories. Our modular system makes it possible. Overleaf, you can find a table with all the basic components that go to make up a tipper trailer in conjunction with optional special accessories. You can fill this out in conjunction with our sales representative. Simply tick the additional elements, which your specially configured trailer is to contain. Your entries from the basis for drawing up of your offer. So you can optimally orientate yourself, we present all the possible equipment versions within this brochure together with numerous figures and explanations. Thus you can obtain an even better idea of the great variety of components. Just one more tip: Always leave the table folded out as you page through the brochure. This means you will always be able to see all the options for any particular equipment version at a glance and thus simplify the configuration of your trailer. The Schmitz Cargobull modular system for more flexibility and investment security just more. Also use our service offer to optimise your transport requirements.
S.KI LIGHT tipper trailer S.KI SOLID tipper trailer Aluminium box-body S.KI LIGHT Factors influencing body selection: Bulk cargo density in t / m³ Mechanical properties of the bulk cargo e.g. abrasiveness Properties of the bulk cargo e.g. grain size Number of tipping cycles, tipping frequency Cargo: Basic model Desired body volume: m 3 Optional special accessories (please tick) Model lengths Number of Grain sliders Rear wall variants 7.2 AK 7.2 AK 9.6 AK 9.6 AKP 10.5 AKP 1 2 Pendulum flap with chute 20 Pendulum flap overlying 20 Combi-door construction site 1/1 Combi-door volumes 1/1 Combi-door single leaf Pendulum flap overlying 90 Leaf door volumes 1/1 Canopy top No body cover Working platform and roll-up tarpaulin with straight canopy frame Working platform and roll-up tarpaulin with roof-shaped canopy frame Manual sliding canopy* Electric sliding canopy* * Available for selected side wall heights Hydraulics Low pressure 170 bar High pressure 250 bar Chassis / running gear Accessories / Options Chassis frame 7.2 8.2 9.6 10.5 SL steel standard light construction SLL steel extra light SL HD steel light construction, reinforced SL 3AT steel light construction for 3-axle tractor Running gear SKI 18 / 22 7.2 SKI 24 7.2 SKI 24 8.2 SKI 24 9.6 SKI 24 10.5 Air sprung 2x9 t with drum brake Air sprung 2x9 t with disc brake Air sprung 2x11 t with drum brake Air sprung 3x9 t with drum brake Air sprung 3x9 t with disc brake Selected accessories Premium construction site tyres Aluminium wheels Aluminium air reservoir Landing gear Auxiliary supports Aluminium drop supports Automatic lowering during tipping Paver brake for use on road pavers Loading manometer Hub-odometer Working spotlight Plastic tool box Fire extinguisher Water tank Aluminium ladder Body under belt heating
Construction site Tailboard flaps AK SR SK Bodies Vehicle combinations Frames Axle unit The modular system for your transport solution always the right tipper trailer Always on the move, Always in Action. Short routes. Non-stop. Shuttling back and forth. Poor roads, tracks & building sites. Running and loading. Running and tipping. Continually tipping. Rocks, sand, gravel, building materials, stone chips, broken stone, asphalt, demolition materials, building site residues, rubble, excavated materials, metal, scrap, wood, sludge, grain, debris, earth whatever it is you want to move, we've got the tipper for you. For every situation the tipper vehicles S.KI LIGHT Wide range of aluminium box bodies. Extremely loadable yet also extremely light. S.KI SOLID Rounded steel and box bodies for bulk cargo transport with frequent tipping especially of abrasive cargo. S.KI HEAVY Heavy duty model of rear tipping semitrailer for up to 50 tonnes payload and up to 34m³ volume.
Capacities Tailboard flaps AK SR Bodies Vehicle combinations Frames Axle unit A steel chassis which is nevertheless light Strong, but still weight optimised from steel. Buckling resistant with optimised torsion cross members to guarantee safe standing. Easy to repair steel frame with long service life. Series production guarantees uniform quality at prices in line with the market. The steel chassis' high value retention in conjunction with its high payload ensure excellent profit yields. The bodies a wide range of options The many available variants of the aluminium box bodies, which use Schmitz Cargobull system profiles, can carry very high loads while remaining extremely light and having a full off-road capability. The rounded steel bodies have a 4 mm thick bottom and 3.2 mm thick side walls. Use of high-grade HB 450 steel ensures optimum wear resistance. The tail: from pendulum flap, combi-door, hydraulic tailboard flap through to grain slider and additional locking options: everything can be combined.
1 S.KI 24SL 7.2 Aluminium box-body with Schmitz Cargobull sliding tarpaulin 5 S.KI 24SL 8.2 Aluminium box-body 6 Recessed pendulum flap with chute 7 Recessed pendulum flap with chute and grain slide 8 Overlying hinged tailgate
2 Flap guides and additional locking devices for overlying pendulum flap 9 Overlying pendulum flap with grain slide 3 4 Four-hook lock Combi-door, symmetrically divided, with pendulum frame, without transverse brace above the door, one or two grain slides Wear plates in the rear areas of the side walls The tipping test bed in the Gotha factory during development for design optimisation in respect of extremely high tipping stability even on uneven ground 10 Accessories / Options Chassis / running gear Configuration S.KI SOLID Configuration S.KI LIGHT/Construction site
1 2 S.KI 24SL 9.6 aluminium box body Transverse brace with clamping chain 6 S.KI 24SL 10.5 Aluminium box body pallet width 8 9 10 Vertical overlying pendulum flap Vertical overlying pendulum flap with grain slide Symmetrically divided aluminium double leaf door, (transverse brace above the door), 2 grain sliders
3 4 Locking block for unloading through the grain slider(s) 11 Single wing combi-door with additional locking devices and pneumatic locking, option: central grain slider Combi-door during tipping with two open grain sliders 7 Combi-door during tipping with open and fixed-back door leafs 5 Combi-door during tipping with open pendulum flap Accessories / Options Chassis / running gear Configuration S.KI SOLID Configuration S.KI LIGHT/Volume
1 S.KI 18SL 7.2 rounded steel body 5 S.KI 24SL 7.2 Steel rounded body 7 Locking rod for the automatical / mechanical tailboard hook lock 8 Combi-door, symmetrically divided, with pendulum frame, without transverse brace above the door, one grain slide 9 Hydraulically operated hinged tailboard with chute
2 3 Recessed pendulum flap with chute Overlying pendulum flap with additional locking devices 4 Overlying pendulum flap with additional locking devices and grain slider Configuration S.KI LIGHT 10 Open hydraulically operated tailboard 6 S.KI 24SL 8.2 rounded steel body in use on a road paver Accessories / Options Chassis / running gear Configuration S.KI SOLID / Construction site
1 S.KI 24SL 9.6 rounded steel body 3 S.KI 24SL 10.5 Steel rounded body 5 Locking hooks with recall function 6 Locking hooks of the side operated safety lock 7 Lever for the side operated hook lock, hook lock closed
2 Symmetrically divided leaf door with an espagnolette bolt Configuration S.KI LIGHT 4 Leaf door opened and fastened back 8 Locking hooks open, for lock protection completely recessed into the fender plate Accessories / Options Chassis / running gear Configuration S.KI SOLID / Volume
1 2 Drawn-in fifthwheel section of the steel chassis Working platform with folding access, positionable on either left or right 6 Steel chassis in weight-optimised design with hybrid frame tail and a schematic portrayal of an aluminium box body 8 Bracket for electrical and air connections 9 Air reservoir, optionally in steel or aluminium
3 4 Central body position guide Robust tipping bearing with bearing bush 5 Towing eye with bolt Configuration S.KI SOLID Configuration S.KI LIGHT 10 Protected operating unit fitted beneath the main beam 7 Folding underride guard for use on road pavers 11 Operating unit as equipped with ECAS system, control box with or without display Accessories / Options Chassis / running gear
1 2 ROTOS running gear with large 22.5" internally ventilated disc brake Drum brake 5 Chassis with weight optimised construction with hybrid frame tail with a schematic portrayal of a rounded steel body 10 MRH HD pneumatic suspension with 350 mm Ø air bellows 11 Aluminium drop supports 12 Plug-in auxiliary supports
3 4 Steering tag axle Automatic axle lift on the first axle that is raised or lowered depending on the load Configuration S.KI LIGHT 6 7 Configuration S.KI SOLID 13 Semitrailer landing gear with compensating feet and two gears. 8 Mudguard variants: 6. Single wheel mudguard, 7. 1/4 shell mudguard, 8. Shell mudguard with stainless steel cover, 9. Heat resistant mud flap 14 Spare wheel carrier, wind-down version 9 15 Aluminium wheel Accessories / Options Chassis / running gear
3 1 2 4 Fire extinguisher 8 Water tank 3. Aluminium step ladder stowed on the side of the longitudinal I-beam 4. Operating bar for tensioning the rolling tarpaulin S.KI 24SL 7.2 Aluminium box body sliding canopy 13 Plastic tool box 14 Loading manometer 15 Hub-odometer
5 6 Tarpaulin fastening with tensioning belt and ratchet Roller tarpaulin Roller tarpaulin winding system 7 Configuration S.KI LIGHT 9 10 Configuration S.KI SOLID 11 Schmitz Cargobull sliding tarpaulin: 9. Front roof for holding the open canopy, 10. Electrical drive, 11. Control panel, 12. Remote control 12 Chassis / running gear 16 17 18 Working spotlight Heating funnel for body heating Floor wear plate in aluminium box body Accessories / Options
1 2 3 Combi-door, symmetrically divided, with pendulum frame, without transverse brace above the door, one grain slide 7 Combi-door: emptying through opened and locked back doors Combi-door: emptying through opened grain slider S.KI 24SL 7.2 with rounded steel body, sidewall 1,300 mm, Cargo volume 21.8 m³ 9 10 11 Water tank Fire extinguisher View of tail with round 3-chamber lights (for Denmark)
4 5 6 Combi-door: emptying with open pendulum flap Schmitz Cargobull sliding tarpaulin with mechanical drive, access ladder Plastic tool box 8 S.KI 24SL 9.6 3AT chassis frame for 3-axle tractor 12 Aluminium box body 9.6 with pendulum flap, chute for construction site use Export
Basic model Rounded steel body S.KI SOLID Optional special accessories (please tick) Factors influencing body selection: Bulk cargo density in t / m³ Mechanical properties of the bulk cargo e.g. Abrasiveness Properties of the bulk cargo e.g. Grain size Number of tipping cycles, tipping frequency Cargo: Desired body volume: m 3 Steel rounded body Steel box-body Rear wall variants 7.2 8.2 9.6 10.5 8.2 8.5 Pendulum flap with chute 17 Pendulum flap, overlying, 17 Combi-door construction site 1/1 Hydraulically operated tailboard with chute Hydraulically operated overlying tailboard Leaf door 1 / 1 Pendulum flap overlying 90 Top canopy No body cover Working platform and roll-up tarpaulin with straight canopy frame Working platform and roll-up tarpaulin with roof-shaped canopy frame Manual sliding canopy* Electric sliding canopy* * Available for selected side wall heights Hydraulics Low pressure 170 bar High pressure 250 bar Trailer chassis SL steel standard light construction SLL steel extra light SL HD steel light construction, reinforced SL 3AT steel light construction for 3-axle tractor S HD Steel Heavy Duty S HD Stahl Heavy Duty for 3-axle tractor Running gear SKI 18 / 22 7.2 SKI 24 7.2 SKI 24 8.2 SKI 24 9.6 SKI 24 10.5 SKI 39 8.5 Air sprung 2x9 t with drum brake Air sprung 2x9 t with disc brake Air sprung 2x11 t with drum brake Air sprung 3x9 t with drum brake Air sprung 3x9 t with disc brake Air sprung 3x13 t with drum brake Selected accessories Premium construction site tyres Aluminium wheels Aluminium air reservoir Landing gear Auxiliary supports Aluminium drop supports Automatic lowering during tipping Paver brake for use on road pavers Loading manometer Hub-odometer Working spotlight Plastic tool box Fire extinguisher Water tank Aluminium step-ladder Body under belt heating Accessories / Options Chassis / running gear Configuration S.KI SOLID Configuration S.KI LIGHT
1 2 S.KI 39 8.5 HD with steel box-body for 3-axle tractors, 34m³ volume tipper semitrailer for construction site use in export markets with up to 50 tonnes payload One/two spare wheel carriers behind the working platform 3 S.KI 24 S 8.5 HD with steel box-body Export S.KI HEAVY 4 S.KI 39 8.5 HD: 3-axle running gear with dual tyres 5 S.KI 39 8.5 HD with vertical pendulum flap and four hook lock 6 S.KI 24 8.2 HD with recessed pendulum flap and chute, two-hook lock
Trailer Reefer semitrailer Curtainsider Tipper trailer Intermodal transport Services Consulting Finance Full Service Spare parts Repairs Telematics Second-hand vehicles Service Partner Network Schmitz Cargobull AG Bahnhofstr. 22 D-48612 Horstmar Phone +49 2558 81-0 Fax +49 2558 81-500 E-mail: info@cargobull.com www.cargobull.com S.KI-CON-DEGB-1828-3708 Some illustrations shown with special fittings We retain the right to make further technical developments. Issued 27/08/08