AGCO Paint Application Reference Guide P P Promo 265
The following are registered trademarks of AGCO Corporation, Duluth, Ga.: AGCO, the AGCO logo, the Ag-Chem logo, Cockshutt, Epsilon, Farmhand, Fendt, GLEANER, Glencoe, Hart-Parr, Heritage, Hesston, Lor-Al, Massey Ferguson, Minneapolis-Moline, New Idea, Oliver, RoGator, Spra-Coupe, Sunflower, TerraGator, Tidal Wave, Tye, Valtra, Vario, the WFE logo, and Willmar. The following are trademarks of AGCO Corporation: Allis-Chalmers, Ferguson, Fieldstart, Massey-Harris, SisuDiesel, AGCO SprayParts and White. Challenger is a registered trademark of, and is used with permission from, Caterpillar Inc., Peoria, Ill. All other brand names are property of their respective trademark owners.
Contents Technical Data.. 1 AGCO Paint Application... 11 AGCOStar and White Paint Application... 21 White, Oliver Cockshutt, New Idea 22 New Idea 23 White and New Idea... 24 Hesston, GLEANER..25 SAME, Farmhand..26 Black Machine, Valtra.. 27 Massey Ferguson Paint Application.. 28 Challenger Paint Application.. 42 Ag-Chem Pant Application.. 45 Sunflower Paint Application...49 Paint Index.. 50
AGCO 2.8 VOC MACHINERY ENAMELS Available In: Qts Gals Challenger Yellow 79023277 79023278 M1041 Red 651787M91 651786M91 Corporate Orange 79023273 79023272 Autumn Prime 79023275 79023274 Chassis Gray 79025182 For Use On: MASSEY FERGUSON Agricultural, Lawn & Garden, and Industrial Equipment. CHALLENGER, HESSTON TECHNICAL DATA: Product Type 2.8 VOC Alkyd Enamel Gloss 90+ on 60 / 80+ on 20 Solids By Weight 57.5 By Volume 49.4 Weight per gallon 8.23 Surface Metal, Fiberglass Reduction Up to 6:1 (Paint: Acetone) Hardener 6:1:1 (Paint: Renew Hardener REN4001:Acetone) Spreading Thickness Film thickness Surface temperature Minimum/Maximum Dry Time To Touch To Handle Full Cure Recoat Time With Hardener Dry Time To Touch To Handle Full Cure 750 + sq. ft. per gallon 2.5 3.0 mils wet 1.5 2.5 mils dry 40 F/90 F 2 4 hours 12 24 hours 14 Days Within 30 minutes or after 36 hours of the last coat 30 60 minutes 4 6 hours 14 Days Features: 2.8 VOC Compliant Matches Original Finish Superior Gloss & Color Retention Durable Outstanding Adhesion, Flexibility and Chip Resistance Description: A 2.8 VOC compliant alkyd enamel designed to provide the extreme gloss and weathering performance of an acrylic with the ease of an alkyd application. Surface Preparation: The surface must be clean, dry and free of all dirt, rust and other foreign matter. Remove all loose, peeling or cracked paint. Feather sand (using 400 sandpaper) rough edges, followed by solvent wipe. Allow 10-20 minutes for solvent flash off. Prime bare metal. Glossy surfaces must be lightly sanded to insure proper adhesion. Fiberglass: Scrub with foaming cleaner, rinse well and allow to dry. Sand fiberglass thoroughly to completely remove gloss and provide adhesion. Wipe surface with solvent and allow to dry. Galvanized: AGCO specifies galvanized surfaces be supplied dry, which eliminates the usual requirement to remove all oils from the surface. Remove all loose, peeling or cracked surface. Lightly sand (using 400 sandpaper) all new and aged galvanized surfaces to ensure good adhesion. Feather sand (using 400 sandpaper) rough edges, followed by solvent wipe. Allow 10-20 minutes for solvent flash off. Priming: To insure best results, bare ferrous metal should be primed with AGCO Fast Dry Primers. AGCO Primers may be topcoated within 1 ½ hours and should be topcoated within 5 days. If primer stands longer than 5 days, surface must be properly prepared again. Application: Stir thoroughly, using circular, lifting motion. Apply when surface and air temperatures range between 40 F-90 F. Clean Up & Reducer ACETONE IMPORTANT: Use of other type of thinner will raise VOC level of paint. Technical Assistance: 877-724-0597 1
Spray Application: Product is supplied at under 2.8 VOC. It is formulated to spray at the viscosity supplied for most spray applicators. The paint may seem very thin this is normal for low VOC paint formulations. If reduction is necessary, USE ONLY ACETONE. Add one part Acetone to 6 parts paint. Continuously stir paint while gradually adding Acetone. Exact reduction varies with type of spray equipment and air pressure used. Apply in light mist coats until desired appearance is achieved. Allow paint to become tacky between coats. Recommended recoat window is before 30 minutes or after 36 hours of the last coat. The data on this sheet represents typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide. VALSPAR assumes no obligation or liability for use of this information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSAPR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICUALR USE OR FREEDOM FROM PATENT INFRINGEMENT. VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this product is the replacement of the defective product or a refund of the purchase price at our option. Start at the top of equipment and work down to eliminate dry spray which dulls the finish. With Hardener: (FOR PROFESSIONAL OR INDUSTRIAL USE ONLY) Add Renew Hardener 6:1:1, Paint:Hardener:Acetone. Allow mixture to set for 10-15 minutes before using, mix again thoroughly before application. Do not mix more than will be used within a 6 hour period. Do not use material that has started to body. High temperatures will reduce pot life. Brush Application: This paint should not be thinned for brush application. Apply to small areas and brush out to an even uniform coat. Recoating: When more than one coat is desired, recoat within 30 minutes or after 36 hours of the last coat. Heavy film, high humidity or low temperatures will lengthen the recommended time interval before recoat. In those conditions, recoat should be tested on small, hidden areas. Spreading rate: 700-800 square foot per gallon, depending upon method of application and type of surface. Drying time Dries to touch in 2 4 hours under average temperature and humidity. Equipment may be handled in 12-24 hours. Do not wax equipment for 2 weeks. Dry time will vary due to atmospheric conditions. With Hardener, dries to touch within 30-60 minutes under average temperature and humidity. Equipment may be handled within 4 6 hours. Do not wax equipment for 2 weeks. Dry time will vary due to atmospheric conditions. Clean Up: Clean up tools and spatters immediately Acetone. Safety Precautions Always paint in well-ventilated areas. Use an approved respirator when sanding or spraying. Never spray near open flame of other ignition sources. Safety glasses and gloves should be worn when handling any paint product. See Safety Material Sheet and Product Label for further safety precautions and handing information. Hardener for Professional or Industrial Use Only. 2
AGCO ACRYLIC ENAMELS TECHNICAL DATA: Product Type Fast Dry Acrylic Modified Alkyd Gloss 90+ on 60 / 80+ on 20 Semi Gloss Black 40 + on 60 Solids By Weight By Volume Weight per gallon Surface Primer Metal, Fiberglass AGCO Fast Dry Primer (may be applied directly to properly prepared surfaces) Conventional Spray (Binks or equal) Hank Gun 18,19,29 or 62 Fluid tip 66 Orifice.070 Air Cap 66 Atomizing Pressure 40-60 PSI Fluid Pressure Airless (Graco or equal) Minimum Pump Ratio 30:1 20-30 PSI Tip.015 -.018 Pressure 1800 2000 PSI HVLP Fluid Tip Air Cap Accuspray Series 10.036 #9 Binks M1G #94 93P Devilbiss JGHV-530 GX #33 Devilbiss GFHV-501 DFW #57 Mattson LP-DC.040 Gold Sata NR92/95 gravity 1.7mm Sharpe SGF-HVLP 1.4mm (.055) #12 Sharpe 975HVLP pressure 0.8mm #12S Reduction Up to 8:1 (Paint: AGCO Thinner) Hardener 8:1:1 (Paint: AGCO Thinner: Renew Hardener REN3001) 3 Available In: Qts Gals M1023 Industrial Yellow 768976M3 M1041 Red 830707M5 830708M5 M1025 Flint Metallic Gray 830719M2 830720M2 M1037 Silver Metallic Gray 841556M2 M1055 Construction Yellow 841729M1 M1056 Charcoal Gray 841740M1 M1071 French Silver Mist 841816M1 Mirror Black 1077536M1 Silver Metallic Gray 1077727M1 M1073 Smoke Gray 1907034M1 Landini Blue 3311965M1 Corporate Orange 79014872 79014781 AGCO Orange 79018734 79018735 Spring Green (AG&L&G) 79014784 79014783 Persian Orange 79014785 Persian Orange 1 79021641 Gun Metal Blue 79014788 Cream 79014790 New White 79014793 Aluminum 79014795 Black Gloss 79014797 79014796 Black Semi Gloss 79014798 Pearl Gray 79014800 Corporate Silver 79014802 79014801 Midnight Brown 79014822 Autumn Prime 79014824 79014823 Charolais White 79014826 Hesston Red 79015806 79015805 Prairie Gold 79014808 Meadow Green 79014805 79014804 Clover White 79014806 79014807 Same Red 79015809 79015808 Yellow American Series 79014809 Argent Silver 79014811 79014810 Charcoal Gray Metallic 79014815 Charcoal Gray Gloss 79014816 WFE III (Red Amer Ser) 79015803 79015802 Combine Red 20-7002850 NI Buff 17225 NI Bittersweet 17223 NI Green 17221 NI Light Gray Gloss 17586 79016946 Fendt Green 79017749 Fendt Gray 79017753 Tye Orange 566-014 Glencoe Green 1R61300 Spra Coupe Orange 6722782 Spra Coupe Charcoal 6722785 Spra Coupe White 6722788 Wilmar Orange WR20936 Wilmar White WR20937 Wilmar Wiltone WR33588 Wilmar Yellow WR35372 Chassis Gray 79025172 For Use On: MASSEY FERGUSON Agricultural, Lawn & Garden, and Industrial Equipment. AGCO ALLIS, DEUTZ ALLIS, HESSTON, WHITE NEW IDEA, MINNEAPOLIS MOLINE, OLIVER, GLEANER, COCKSHUTT, AGCO STAR, LANDINI, SAME, FENDT SPRA COUPE, & WILMAR Features: Matches Original Finish Fast Dry, Minimal Down Time Superior Gloss & Color Retention Durable Outstanding Adhesion, Flexibility and Chip Resistance
Description: An acrylic modified alkyd enamel designed to provide the extreme gloss and weathering performance of an acrylic with the ease of an alkyd application. Surface Preparation: The surface must be clean, dry and free of all dirt, rust and other foreign matter. Remove all loose, peeling or cracked paint. Feather sand (using 400 sandpaper) rough edges, followed by solvent wipe. Allow 10-20 minutes for solvent flash off. Prime bare metal. Glossy surfaces must be lightly sanded to insure proper adhesion. Fiberglass: Scrub with foaming cleaner, rinse well and allow to dry. Sand fiberglass thoroughly to completely remove gloss and provide adhesion. Wipe surface with solvent and allow to dry. Galvanized: AGCO specifies galvanized surfaces be supplied dry, which eliminates the usual requirement to remove all oils from the surface. Remove all loose, peeling or cracked surface. Lightly sand (using 400 sandpaper) all new and aged galvanized surfaces to ensure good adhesion. Feather sand (using 400 sandpaper) rough edges, followed by solvent wipe. Allow 10-20 minutes for solvent flash off. Priming: To insure best results, bare ferrous metal should be primed with AGCO Fast Dry Primers. AGCO Primers may be topcoated within 1 ½ hours and should be topcoated within 5 days. If primer stands longer than 5 days, surface must be properly prepared again. Application: Stir thoroughly, using circular, lifting motion. Due to fast dry properties, spray application is recommended. Apply when surface and air temperatures range between 40F-90F. Spray Application: Reduce with AGCO Thinner up to 8:1, reduction may vary with types of equipment and atmospheric conditions. Spray a mist or tack coat, followed by a full wet coat to avoid runs and sags. Start at the top of equipment and work down to eliminate dry spray which dulls the finish. With Hardener: (FOR PROFESSIONAL OR INDUSTRIAL USE ONLY) Add Renew Hardener 8:1:1, Paint:Hardener:Thinner. Allow mixture to set for 15-20 minutes before using, mix again thoroughly before application. Do not mix more than will be used within an 8 hour period. Do not use material that has started to body. High temperatures will reduce pot life. Recoating: When more than one coat is desired, recoat within 2 hours or after 48 hours. Heavy film, high humidity or low temperatures will lengthen the recommended time interval before recoat. In those conditions, recoat should be tested on small, hidden areas. Spreading rate: 400-500 square foot per gallon, depending upon method of application and type of surface. Do not wax equipment for 2 weeks. Dry time will vary due to atmospheric conditions. With Hardener, dries to touch within 15-30 minutes under average temperature and humidity. Equipment may be handled within 2-4 hours. Do not wax equipment for 2 weeks. Dry time will vary due to atmospheric conditions. Clean Up: Clean up tools and spatters immediately with AGCO Thinner. Spreading Thickness Film thickness Surface Temperature Minimum/Maximum With Hardener Dry Time To Touch To Handle Full Cure Recoat Time 48 Hours 450 + sq. ft. per gallon 2.5 3.0 mils wet 1.2 mils dry 40 F/90F 15 30 minutes 2 4 hours 14 Days Within 2 hours or after Clean Up & Reducer AGCO Thinner (79015024, 1904947M1) VOC Product Unreduced 485 g/l 508 g/l At Recommended Reduction 521 g/l 542 g/l Technical Assistance: 877-724-0597 Safety Precautions Always paint in well-ventilated areas. Use an approved respirator when sanding or spraying. Never spray near open flame of other ignition sources. Safety glasses and gloves should be worn when handling any paint product. See Safety Material Sheet and Product Label for further safety precautions and handing information. Hardener for Professional or Industrial Use Only. The data on this sheet represents typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide. VALSPAR assumes no obligation or liability for use of this information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSAPR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICUALR USE OR FREEDOM FROM PATENT INFRINGEMENT. VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this product is the replacement of the defective product or a refund of the purchase price at our option. Drying time Dries to touch in 60-90 minutes under average temperature and humidity. Equipment may be handled in 24 36 hours. 4
AGCO MACHINERY ENAMEL AEROSOLS TECHNICAL DATA: Product Type Fast Dry Acrylic Modified Alkyd Gloss 90+ on 60 / 80+ on 20 Semi Gloss Black 40 + on 60 Surface Primer Surface Temperature Minimum / Maximum Dry Time To Touch To Recoat Metal, Fiberglass AGCO Fast Dry Primer (may be applied directly to properly prepared surfaces) 45 F/ 90 F 40-60 Minutes Within 3 hours or after 24 hours VOC Exact Match Finish Industrial contains less than 88% VOC by weight, MIR 2.05 Safety Precautions Always paint in well-ventilated areas. Use an approved respirator when sanding or spraying. Never spray near open flame of other ignition sources. Safety glasses and gloves should be worn when handling any paint product. See Safety Material Sheet and Product Label for further safety precautions and handing information. TECHNICAL ASSISTANCE: 1-877-724-0597 Available In: M1023 Industrial Yellow 841682M2 M1041 Red 1906406M2 M1025 Flint Metallic Gray 841683M1 M1037 Silver Metallic Gray 841686M1 M1026 Flint Gray 841684M1 M1042 Bright Aluminum 841687M1 M1053 Uni Gray 841717M1 M1011 Light Gray 841680M1 M1055 Construction Yellow 841730M1 M1056 Charcoal Gray 841739M1 M1071 French Silver Mist 841818M1 Mirror Black 1077728M1 Silver Metallic Gray 1077726M1 M1073 Smoke Gray 1907035M1 M1074 Slate Gary 79016948 Landini Blue 841758M1 Corporate Orange 79014656 AGCO Orange 79018733 Spring Green (AG&L&G) 79014665 Persian Orange 79014664 Gun Metal Blue 79014659 Maroon 79014660 Cream 79014657 Cloud White 79014655 New White 79014661 Aluminum 79014652 Black Gloss 79014653 Black Semi Gloss 79014654 Pearl Gray 79014663 Corporate Silver 79014803 Gray Semi Gloss 79014658 Midnight Brown 79014844 Autumn Prime 79014845 Charolais White 79014846 Cascade White 79014847 Off White 79014848 Hesston Red 79015807 Prairie Gold 79014834 Meadow Green 79014831 Clover White 79014832 79014833 Same Red 79015810 Saddle Brown 79017235 Yellow American Series 79014835 Argent Silver 79014836 Charcoal Gray Metallic 79014838 Charcoal Gray Gloss 79014839 WFE III (Red Amer Ser) 79015804 Southbend Red 20-7002256 Combine Red 20-7002255 NI Buff 15961 NI Bittersweet 15959 NI Green 15960 NI Light Gray Gloss 17565 Landini Blue 841758M1 Avio Blue 841755M1 79016946 Glencoe Green EP6495 Tye Orange 566-001 Fendt Green 79017750 Fendt Red 79017751 Fendt Gray 79017754 Spra Coupe Orange 6722783 Spra Coupe Charcoal 6722786 Spra Coupe White 6722789 Spra Coupe Red 6722790 Wilmar Orange WR17504 Wilmar White WR17503 Wilmar Wiltone WR33585 Wilmar Yellow WR35369 Valtra Dark Brown 79023279 Valtra Gray 79023280 Challenger Yellow 79023278 Chassis Gray 79025173 5
For Use On: MASSEY FERGUSON Agricultural, Lawn & Garden, and Industrial Equipment. AGCO ALLIS, DEUTZ ALLIS, HESSTON, WHITE NEW IDEA, MINNEAPOLIS MOLINE, OLIVER, GLEANER, COCKSHUTT, AGCO STAR, LANDINI, SAME, FENDT SPRA COUPE, & WILMAR Features: Matches Original Finish Fan Spray for Professional Application Superior Gloss & Color Retention Durable Outstanding Adhesion, Flexibility and Chip Resistance Description: A fast drying acrylic enamel aerosol. Perfect for touch up of small areas or repaint of small parts. Surface Preparation: The surface must be clean, dry and free of all dirt, rust and other foreign matter. Remove all loose, peeling or cracked paint. Feather sand (using 400 sandpaper) rough edges, followed by solvent wipe. Allow 10-20 minutes for solvent flash off. Prime bare metal. Glossy surfaces must be lightly sanded to insure proper adhesion. Fiberglass: Scrub with foaming cleaner, rinse well and allow to dry. Sand fiberglass thoroughly to completely remove gloss and provide adhesion. Wipe surface with solvent and allow to dry. Galvanized: AGCO specifies galvanized surfaces be supplied dry, which eliminates the usual requirement to remove all oils from the surface. Remove all loose, peeling or cracked surface. Lightly sand (using 400 sandpaper) all new and aged galvanized surfaces to ensure good adhesion. Feather sand (using 400 sandpaper) rough edges, followed by solvent wipe. Allow 10-20 minutes for solvent flash off. Recoating: If additional coats are required, recoat within 3 hours or after 24 hours. Heavy film, high humidity or low temperature will lengthen recommended time interval before recoat. In those conditions, recoat should be tested on small, hidden areas. Drying time Dries to touch in 40 60 minutes under average temperature and humidity. Equipment may be handled in 12-24 hours. Do not wax equipment for 2 weeks. Dry time will vary due to atmospheric conditions. The data on this sheet represents typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide. VALSPAR assumes no obligation or liability for use of this information. UNLESS VALSPAR AGRESS OTHERWISE IN WRITING, VALSAPR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICUALR USE OR FREEDOM FROM PATENT INFRINGEMENT. VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this product is the replacement of the defective product or a refund of the purchase price at our option. Priming: To insure best results, bare ferrous metal should be primed with AGCO Fast Dry Primers. AGCO Primers may be topcoated within 1 ½ hours and should be topcoated within 5 days. AGCO Primer Aerosol may be topcoated within ½ hour. If primer stands longer than 5 days, surface must be properly prepared again. Application: Shake can until agitator ball moves freely for three minutes. Rotate can while shaking. Shake the can occasionally during use. For best results, use when the can temperature is approximately 75 F. Hold the can 8 10 inches from the surface to be painted. Apply with steady, even strokes. Apply several light coats, allowing the paint to become tacky between coats. If clogging occurs, remove spray button with twisting motion and clean. Do not stick pin or other object into can. Replace by gently twisting on. 6
AGCO MACHINERY ENAMEL PRIMER Available In: Aerosol Qts Gals Gray 79014483 79014481 79014482 Red Oxide 1904943M1 1904945M1 For Use On: MASSEY FERGUSON Agricultural, Lawn & Garden, and Industrial Equipment. AGCO ALLIS, DEUTZ ALLIS, HESSTON, WHITE NEW IDEA, MINNEAPOLIS MOLINE, OLIVER, GLEANER, COCKSHUTT, AGCO STAR, LANDINI, SAME, FENDT SPRA COUPE, & WILMAR TECHNICAL DATA: Product Type Fast Dry Gray & Red Oxide Gloss 25 on 60 Solids By Weight 56.6% By Volume 38.1% Weight per gallon 10.17 Surface Metal, Fiberglass Conventional Spray (Binks or equal) Hank Gun 18,19,29 or 62 Fluid tip 66 Orifice.070 Air Cap 66 Atomizing Pressure 40-60 PSI Fluid Pressure Airless (Graco or equal) Minimum Pump Ratio 30:1 20-30 PSI Tip.015 -.018 Pressure 1800 2000 PSI HVLP Fluid Tip Air Cap Accuspray Series 10.036 #9 Binks M1G #94 93P Devilbiss JGHV-530 GX #33 Devilbiss GFHV-501 DFW #57 Mattson LP-DC.040 Gold Sata NR92/95 gravity 1.7mm Sharpe SGF-HVLP 1.4mm (.055) #12 Sharpe 975HVLP pressure 0.8mm #12S Reduction Spreading Rate Film Thinckness Up to 8:1 (Paint: AGCO Thinner) 500 600 sq. ft. per gal. 2.5 mils wet 1.0 mils dry Surface Temperature: Minimum / Maximum 40 F 95 F Any surface where an automotive type primer is recommended. Features: Inhibits Rust Fast Dry Sandable Flexible Description: A fast drying, rust inhibiting, gray and red oxide primer for use over properly prepared ferrous surfaces. Forms a tight barrier against Rust producing elements while hiding slight surface imperfections. Provides excellent adhesion when used as a primer coat on on clean, well sanded fiberglass and aluminum surfaces. alkyd application. Surface Preparation: The surface must be clean, dry and free of all dirt, rust and other foreign matter. Remove all loose, peeling or cracked paint. Feather sand (using 400 sandpaper) rough edges, followed by solvent wipe. Allow 10-20 minutes for solvent flash off. Prime bare metal. Glossy surfaces must be lightly sanded to insure proper adhesion. Fiberglass: Scrub with foaming cleaner, rinse well and allow to dry. Sand fiberglass thoroughly to completely remove gloss and provide adhesion. Wipe surface with solvent and allow to dry. Galvanized: AGCO specifies galvanized surfaces be supplied dry, which eliminates the usual requirement to remove all oils from the surface. Remove all loose, peeling or cracked surface. Lightly sand (using 400 sandpaper) all new and aged galvanized surfaces to ensure good adhesion. Feather sand (using 400 sandpaper) rough edges, followed by solvent wipe. Allow 10-20 minutes for solvent flash off. Prime any areas of bare metal. Application: Stir thoroughly, using circular, lifting motion. Apply when surface and air temperatures range between 40 F 95 F. Due to fast dry properties, spray application is recommended. Fast dry properties allow for topcoating after 1 ½ hours dry time. Allow 2 2 ½ hours dry time when sanding is desired. Topcoat within 4 hours or after 48 hours. Primer allowed to dry for 5 days will require additional surface preparation to ensure proper adhesion of top coat. Clean Up and Reducer VOC AGCO Thinner 510.5 g/l Spreading Rate 500 600 square feet per gallon. Depending on method of application and type of surface. 7
Clean Up Clean up tools and spatters immediately with AGCO Thinner. Technical Assistance: 877-724-0597 Safety Precautions Always paint in well-ventilated areas. Use an approved respirator when sanding or spraying. Never spray near open flame of other ignition sources. Safety glasses and gloves should be worn when handling any paint product. See Safety Material Sheet and Product Label for further safety precautions and handing information. The data on this sheet represents typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide. VALSPAR assumes no obligation or liability for use of this information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSAPR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICUALR USE OR FREEDOM FROM PATENT INFRINGEMENT. VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this product is the replacement of the defective product or a refund of the purchase price at our option. 8
Ag-Chem URA-ZEN (Urethane) Paints Technical Bulletin (Two Part System) Product Description URA-ZEN is a trade name for Hentzen s two-component urethane coatings. This two-component urethane exhibits very high gloss and excellent weatherability characteristics. Handling and Storage The containers should be stored away from direct sunlight and heat. Freezing is not harmful if reheated gently to room temperature prior to use. Physical Characteristics Ag-Chem Ura-Zen Paint Component A: Weight per Gallon: 11.31 lbs ±.25 Weight Solids: 67.99% ± 1.0 Volume Solids: 50.72% ± 1.0 Viscosity: 12-20 Sec. @ #3 Zahn AG723129 Ura-Zen Catalyst-Component B: Weight Per Gallon: 8.90 lbs ±.25 Weight Solids: 73.76% ± 1.0 Volume Solids: 68/02% ± 1.0 Viscosity: 10-16 sec. #3 Zahn Environmental Report Volatile Content (Wt.%): 31.07 Organic Volatile Content (Wt.%) 31.07 Water Content (Wt.%) 0.00 Water Content (Vol.%) 0.00 VOC Minus Water: 3.50 maximum Directions for Use Component A should be thoroughly agitated prior to blending. After agitating Component A, mix 4 volumes of Component A to 1 volume of Component B and mix the two components well. The material is now ready to use. Apply this material with conventional air atomization spray equipment. No Reduction is necessary. Mix only what you will use in 2 hours. After that time, the product will start to gel. Precautions and Safety Do not apply at temperatures below 50ºF. Read all container labels. Read Material Safety Data Sheet. Clean-up Clean equipment immediately after use with AG710232 Thinner or equivalent. Admixed Characteristics Catalyzation Radio: 4:1 by Volume Weight Per Gallon: 10.83 lbs. ±.25 Weight Solids: 68.94% ± 1.0 Volume Solids: 54.17% ± 1.0 VOC: 3.50 max. Viscosity: 12-20 sec. @ #3 Zahn Theoretical Coveragesq. ft./gl. @ 1.0 mil dry film thickness: 868.9 Useable Pot Life: 2-2 ½ hours Cure Schedule Air Dry @ 77º & 50% Relative Humidity: Dust Free: 15-30 minutes Tack Free: 2-2 ½ Hours Print Free: 6-7 Hours Full Cure: 3 Weeks Gloss (60º Glossmeter): 90 min. @ 2.0 mils Available In: Description Yellow Urethane Kit Flat Black Urethane Kit White Urethane Kit Primer Kit 1-Gal., Xylol Thinner Clear Gloss, 1 Gallon Catalyst, 1 Qt. Part Number AG516118 AG716250 AG516120 AG516121 AG710232 AG517966 AG723129 9
Ag-Chem Enamel Paint Technical Bulletin Product Description This product is designed to be a one component maintenance enamel for brush, roller or spray application. It exhibits good adhesion and durability over a variety of substances. Handling and Storage The containers should be stored away from direct sunlight and heat. Freezing is not harmful if reheated gently to room temperature prior to use. Physical Characteristics Weight Per Gallon: 9.95 ±.3 lbs. Weight Solids: 56.68 ± 1.0% Volume Solids: 38.20 ± 1.0% VOC: 4.31 as received Viscosity: 50-60 @ #2 Zahn Reduction Ratio: 5:1 by volume Reduced for Spray: 10-12 @ #3 Zahn Theoretical Coverage sq. ft./gl. @1.0 dry film thickness: Cure Schedule Air Dry @ 77ºF & 50% Relative Humidity: Dust Free: 1 hour Dry to Touch: 2-3 hours Dry to Handle: Overnight Dry Hard: 2-3 weeks Precaution and Safety Do not apply at temperatures below 50ºF. Read all container labels. Read Material Safety Data Sheet. Clean-up Clean equipment immediately after use with Aromatic or Ketone solvents. Available In: Description Yellow, Aerosol White, Aerosol Flat Black, Aerosol Primer, Aerosol Yellow Enamel, 1 Gallon White Enamel, 1 Gallon Flat Black Enamel, 1 Gallon Primer, 1 Gallon Xylol Thinner, 1 Gallon Part Number AG513210 AG513703 AG513704 AG513702 AG511242 AG511234 AG511250 AG511293 AG710232 Environmental Report Volatile Content (Wt.%): 43.32% Organic Volatile Content (Wt.%): 43.32% Water Content (Wt.%): 0.00 Water Content (Vol.%): 0.00 VOC Minus Water: 4.31 Directions for Use Thoroughly agitate the paint before using. Coating should be used as received for brush or roller application, a reduction of 5:1 is recommended with Aromatic Solvent. 10
AGCO Allis-Chalmers A-C Prior to 1930 Dark Green Dark Green or Red Dark Green A-C 1929 thru 1960 Aluminum 79014652 Aerosol A-C 1961 thru 1977 A-C 1978 thru 1985 D-A 1985 thru 1991 AGCO 1990 to present D-A Compacts 1985-1991 Persian Orange Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Spring Green 79014783 Gal. 79014784 Qt. 79014665 Aerosol Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Spring Green 79014783 Gal. 79014784 Qt. 79014665 Aerosol 79014795 Qt. Cream 79014657 Aerosol 79014790 Qt. Aluminum 79014652 Aerosol 79014795 Qt. Cloud White 79014655 Aerosol Aluminum 79014652 Aerosol 79014795 Qt. Pearl Gray 79014800 Qt. 79014663 Aerosol Pearl Gray 79014800 Qt. 79014663 Aerosol Persian Orange or Maroon 79014660 Aerosol Gun Metal Blue 79014787 Gal. 79014788 Qt. 79014659 Aerosol Gun Metal Blue 79014787 Gal. 79014788 Qt. 11
AGCO AGCO 1990 to present AGCO Allis (Italy): 4650, 4660, 5650, 5660, 5670 eff s/n 1500, 5670 prior s/n 1500, 5680 eff. s/n 1500, 5680 prior s/n 1500, 6670, 6680, 6690, 7600, 7630, 7650, 8610, 8630 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Corporate Silver 79014801 Gal. 79014802 Qt. 79014803 Aerosol or Corporate Wheel Gray AGCO Allis (England): 8745, 8765, 9775, 8785 AGCO Allis (Beauvais): 8775, 8785, 8785, 9735, 9745, 9755, 9765, 9775, 9785 AGCO Allis (Coldwater): 9755, 9765, 9775, 9785 AGCO Allis (Independence): 9630, 9650, 9670, 9690, 9635, 9435, 9655, 9455, 9675, 9695, 9815 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) 12
AGCO AGCO 1990 to present (Cont'd) ST, STA Series Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Mirror Black 1077536M1 Qt. 1077728M1 Aerosol LT, LTA Series RT, RTA Series DT, DTA Series GT, GTA Series Deutz-Allis 1985 thru 1991 5215H & S Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Spring Green 79014783 Gal 79014784 Qt. 79014665 Aerosol 13 Pearl Gray 79014800 Qt. 79014663 Aerosol Gun Metal Blue 79014787 Gal. 79014788 Qt. 79014659 Aerosol
AGCO Deutz-Allis 1985 thru 1991 (Cont'd) 5220H & S Spring Green 79014783 Gal 79014784 Qt. 79014665 Aerosol Pearl Gray 79014800 Qt. 79014663 Aerosol Gun Metal Blue 79014787 Gal. 79014788 Qt. 79014659 Aerosol 5230 Spring Green 79014783 Gal 79014784 Qt. 79014665 Aerosol 6035 Spring Green 79014783 Gal 79014784 Qt. 79014665 Aerosol 6150 Spring Green 79014783 Gal 79014784 Qt. 79014665 Aerosol 6240, 6250, 6260 Spring Green 79014783 Gal 79014784 Qt. 79014665 Aerosol 6265, 6275 Spring Green 79014783 Gal 79014784 Qt. 79014665 Aerosol 7085, 7110, 7120, 7145 Spring Green 79014783 Gal 79014784 Qt. 79014665 Aerosol 9150, 9170, 9190 Spring Green 79014783 Gal 79014784 Qt. 79014665 Aerosol 9130, 9150, 9170, 9190 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Pearl Gray 79014800 Qt. 79014663 Aerosol Pearl Gray 79014800 Qt. 79014663 Aerosol Pearl Gray 79014800 Qt. 79014663 Aerosol Pearl Gray 79014800 Qt. 79014663 Aerosol Pearl Gray 79014800 Qt. 79014663 Aerosol Pearl Gray 79014800 Qt. 79014663 Aerosol Pearl Gray 79014663 Aerosol 79014800 Qt. Pearl Gray 79014663 Aerosol 79014800 Qt. Gun Metal Blue 79014787 Gal. 79014788 Qt. 79014659 Aerosol Gun Metal Blue 79014787 Gal. 79014788 Qt. 79014659 Aerosol Gun Metal Blue 79014787 Gal. 79014788 Qt. 79014659 Aerosol Gun Metal Blue 79014787 Gal. 79014788 Qt. 79014659 Aerosol Gun Metal Blue 79014787 Gal. 79014788 Qt. 79014659 Aerosol Gun Metal Blue 79014787 Gal. 79014788 Qt. 79014659 Aerosol Gun Metal Blue 79014787 Gal. 79014788 Qt. 79014659 Aerosol Black (Gloss) 79014796 Gal. 79014797 Qt. 79014653 Aerosol 14
AGCO Allis-Chalmers 1977 thru 1985 175 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Cream 79014790 Qt. 79014657 Aerosol Corporate Orange 185 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) 5010, 5020, 5030 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) 5040 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) 5045 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Cream 79014790 Qt. 79014657 Aerosol Aluminum 79014795 Qt. 79014652 Aerosol Aluminum 79014795 Qt. 79014652 Aerosol Aluminum 79014795 Qt. 79014652 Aerosol Corporate Orange Black Semi-Gloss Maroon 79014660 Aerosol 15
AGCO Allis-Chalmers 1977 thru 1985 (Cont'd) 5050 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Aluminum 79014795 Qt. 79014652 Aerosol Maroon 79014660 Aerosol or Black (1981+) 79014796 Gal. 79014797 Qt. 79014653 Aerosol 6140 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) (Low V.O.C.) 6060, 6070, 6080 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) 7000 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) 7010, 7020 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Aluminum 79014795 Qt. 79014652 Aerosol Aluminum 79014795 Qt. 79014652 Aerosol Aluminum 79014795 Qt. 79014652 Aerosol Aluminum 79014795 Qt. 79014652 Aerosol 16
AGCO Allis-Chalmers 1977 thru 1985 (Cont'd) 7045, 7060, 7080 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Aluminum 79014795 Qt. 79014652 Aerosol 7580, 8550 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) 8010, 8030, 8050, 8070 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) 4W-220. 4W-305 Allis-Chalmers 1960 thru 1977 D-10, D-12 D-15, D-17, D-19 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) Persian Orange Persian Orange D-21 Persian Orange 160 Persian Orange Aluminum 79014795 Qt. 79014652 Aerosol Aluminum 79014795 Qt. 79014652 Aerosol Aluminum 79014795 Qt. 79014652 Aerosol Persian Orange Persian Orange Persian Orange Persian Orange Persian Orange Persian Orange Persian Orange Persian Orange 17
AGCO Allis-Chalmers 1960 thru 1977 (Cont'd) 170, 175 Persian Orange Cream 79014790 Qt. 79014657 Aerosol Persian Orange 180, 185 Persian Orange 190, 190XT Persian Orange 200, 210, 220 Persian Orange 440 Persian Orange 6040 Persian Orange 5040 Persian Orange 7000 Persian Orange 7030 Persian Orange 7040 Persian Orange 7050 Persian Orange 7060 Persian Orange 7080 Persian Orange 7580 Persian Orange Allis-Chalmers 1930 thru 1960 E25-40 Cream 79014790 Qt. 79014657 Aerosol Cream 79014790 Qt. 79014657 Aerosol Cream 79014790 Qt. 79014657 Aerosol Cream 79014790 Qt. 79014657 Aerosol Cream 79014790 Qt. 79014657 Aerosol Cream 79014790 Qt. 79014657 Aerosol Cream 79014790 Qt. 79014657 Aerosol Cream 79014790 Qt. 79014657 Aerosol Cream 79014790 Qt. 79014657 Aerosol Cream 79014790 Qt. 79014657 Aerosol Cream 79014790 Qt. 79014657 Aerosol Cream 79014790 Qt. 79014657 Aerosol Cream 79014790 Qt. 79014657 Aerosol Persian Orange Persian Orange Persian Orange Persian Orange Maroon 79014660 Aerosol Maroon 79014660 Aerosol Maroon 79014660 Aerosol Maroon 79014660 Aerosol Maroon 79014660 Aerosol Maroon 79014660 Aerosol Maroon 79014660 Aerosol Maroon 79014660 Aerosol Maroon 79014660 Aerosol 18
AGCO Allis-Chalmers 1930 thru 1960 (Cont'd) United, U, All-Crop, UC A or Black (Gloss) 79014796 Gal. 79014797 Qt. B 79014653 Aerosol or Black (Gloss) 79014796 Gal. 79014797 Qt. 79014653 Aerosol C CA G RC WC WF WD WD-45 Crawlers - M, K, L, S D-10, D-12 D-14, D-17 Allis-Chalmers Prior to 1930 10-18, 12-20, 15-25 Dark Green Dark Green or Red Dark Green 18-30, 20-35, EK Dark Green Dark Green or Red Dark Green Implements A-C Prior to 1961 A-C 1961 thru 1977 Persian Orange Cream 79014790 Qt. 79014657 Aerosol Persian Orange 19
AGCO Implements (Cont'd) A-C 1978 thru 1985 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) (Low V.O.C.) Pint Cloud White 79014655 Aerosol Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) D-A 1986 thru 1991 Spring Green 79014783 Gal 79014784 Qt. 79014665 Aerosol Pearl Gray 79014800 Qt. 79014663 Aerosol (Low V.O.C.) Spring Green 79014783 Gal 79014784 Qt. 79014665 Aerosol Hay Tools A-C Prior to 1961 A-C 1961 thru 1977 Persian Orange A-C 1978 thru 1985 Corporate Orange Califormia Dealers Use 79023272 Gal. (Low V.O.C.) 79023273 Qt. (Low V.O.C.) (Low V.O.C.) Pint D-A 1986 thru 1991 Spring Green 79014783 Gal 79014784 Qt. 79014665 Aerosol Cream 79014790 Qt. 79014657 Aerosol Cloud White 79014655 Aerosol Pearl Gray 79014800 Qt. 79014663 Aerosol Thinner and Primers Thinner (AGCO Labeled) 79015024 Gal Thinner (AGCO Labeled) 1904947M1 Qt. Red Oxide Primer 1904943M1 Aerosol Red Oxide Primer 1904945M1 Qt. Gray Primer 79014882 Gal. 79014881 Qt. 79014483 Aerosol Hi-Temp Aluminum 79015023 Aerosol Hi-Temp Black 79014480 Aerosol Hardener (V.O.C.) 79023497 Pint Hardener (Non V.O.C.) 79022595 Pint 20
AGCOSTAR AGCOSTAR 8360 Corporate Silver 79014801 Gal. 79014802 Qt. 79014803 Aerosol Corporate Silver (Dual Wheels) 79014801 Gal. 79014802 Qt. AGCOSTAR 8425 White Tractors: 1992 + Tractors: 1986-1991 Tractors: 1975-1986 Tractors: 1982-1986 American 60 & 80 Series Tractor American 60 & 80 Series Tractor American 60 & 80 Series Tractor AGCOStar and White Corporate Silver 79014801 Gal. 79014802 Qt. 79014803 Aerosol Corporate Silver 79014801 Gal. 79014802 Qt. 79014803 Aerosol Argent Silver 79014810 Gal. 79014811 Qt. 79014836 Aerosol Argent Silver 79014810 Gal. 79014811 Qt. 79014836 Aerosol Argent Silver 79014810 Gal. 79014811 Qt. 79014836 Aerosol Industrial Yellow 768976M3 Gal. 841682M2 Aerosol Meadow Green 79014804 Gal. 79014805 Qt. 79014831 Aerosol WFE III Red 79015802 Gal. 79015803 Qt. 79015804 Aerosol 79014803 Aerosol Corporate Silver (Dual Wheels) 79014801 Gal. 79014802 Qt. 79014803 Aerosol Charcoal Gray Metalic (Center) 79014815 Qt. 79014838 Aerosol Argent Silver (Rims) 79014810 Gal. 79014811 Qt. 79014836 Aerosol Charcoal Gray Metalic (Center) 79014815 Qt. 79014838 Aerosol Argent Silver (Rims) 79014810 Gal. 79014811 Qt. 79014836 Aerosol Black (Gloss) 79014796 Gal. 79014797 Qt. 79014653 Aerosol Charcoal Gray 79014816 Qt. 79014839 Aerosol Charcoal Gray Metalic 79014815 Qt. 79014838 Aerosol Charcoal Gray Metalic 79014815 Qt. 79014838 Aerosol 21
White (Cont'd) White Combines Cockshutt Combines Minneapolis Moline Tractors Oliver Tractors AGCO White (Conventry):6410, 6510 AGCO White (Beauvais):6710, 6810, 8310, 8410, 8510, 8610, 8710, 8810 AGCO White (Coldwater):8510, 8610, 8710, 8810 All 300's All 3600's All 3700's White, Oliver Cockshutt, New Idea Combine Red 20-7002850 Qt. 20-7002255 Aerosol Combine Red 20-7002850 Qt. 20-7002255 Aerosol Prairie Gold 79014808 Qt. 79014834 Aerosol Meadow Green 79014804 Gal. 79014805 Qt. 79014831 Aerosol Corporate Silver 79014801 Gal. 79014802 Qt. 79014803 Aerosol Corporate Silver 79014801 Gal. 79014802 Qt. 79014803 Aerosol Corporate Silver 79014801 Gal. 79014802 Qt. 79014803 Aerosol Light Gray 17586 Qt. 17565 Aerosol Light Gray 17586 Qt. 17565 Aerosol Light Gray 17586 Qt. 17565 Aerosol NI Sidekick Spreaders 3200, 3300 WFE III Red 79015802 Gal. 79015803 Qt. 79015804 Aerosol 3810, 3816, 3825 Light Gray 17586 Qt. 17565 Aerosol Southbend Red 20-7002256 Aerosol Clover White 79014806 Qt. 79014832 Aerosol (Cab Roof) (Cab Roof) Clover White 79014806 Qt. 79014832 Aerosol Charcoal Gray 79014816 Qt. 79014839 Aerosol Charcoal Gray 79014816 Qt. 79014839 Aerosol WFE III Red 79015802 Gal. 79015803 Qt. 79015804 Aerosol Charcoal Gray 79014816 Qt. 79014839 Aerosol 22
NI Disc Mowers up to 1994 5400 WFE III Red 79015802 Gal. 79015803 Qt. 79015804 Aerosol NI Disc Mower Conditioners 5200's up to 1994 Light Gray 17586 Qt. 17565 Aerosol 5200's after 1994 WFE III Red 79015802 Gal. 79015803 Qt. 79015804 Aerosol NI Mower Conditioners 290, 299 Bittersweet 17223 Qt. 15959 Aerosol 507, 509 Bittersweet 17223 Qt. 15959 Aerosol 512, 514 Bittersweet 17223 Qt. 15959 Aerosol 5107, 5109, 5112, 5114 New Idea Light Gray 17586 Qt. 17565 Aerosol NI Pickers and Shellers 6 to 331 New Idea Green 17221 Qt. 15960 Aerosol NI Hay Rakes 44 to 404 Bittersweet 17223 Qt. 15959 Aerosol 405 to 4100's New Idea Light Gray 17586 Qt. 17565 Aerosol 4200 WFE III Red 79015802 Gal. 79015803 Qt. 79015804 Aerosol Balers up to 1994 New Idea Light Gray 17586 Qt. 17565 Aerosol Balers After 1994 WFE III Red 79015802 Gal. 79015803 Qt. 79015804 Aerosol New Idea New Idea Buff 17225 Qt. 15961 Aerosol New Idea Buff 17225 Qt. 15961 Aerosol Bittersweet 17223 Qt. 15959 Aerosol 23
White Planters 5100, 5400 WFE III Red 79015802 Gal. 79015803 Qt. 79015804 Aerosol 6100, 6200, 6300 WFE III Red 79015802 Gal. 79015803 Qt. 79015804 Aerosol 6500, 6800 WFE III Red 79015802 Gal. 79015803 Qt. 79015804 Aerosol 8000 Series up to 2006 WFE III Red 79015802 Gal. 79015803 Qt. 79015804 Aerosol 8000 Series 2006 + Sunflower Massey Red SN83004117 Aerosol NI Planters 900's Bittersweet 17223 Qt. 15959 Aerosol 9100, 9200, 9300 Light Gray 17586 Qt. 17565 Aerosol 9700, 9800, 9900 Light Gray 17586 Qt. 17565 Aerosol NI Forage Harvesters 660, 680 Bittersweet 17223 Qt. 15959 Aerosol 662, 663 Bittersweet 17223 Qt. 15959 Aerosol 664, 668 Bittersweet 17223 Qt. 15959 Aerosol White and New Idea New Idea Buff 17225 Qt. 15961 Aerosol New Idea Buff 17225 Qt. 15961 Aerosol New Idea Buff 17225 Qt. 15961 Aerosol New Idea Buff 17225 Qt. 15961 Aerosol 24
Autumn Prime Cascade White 79014823 Gal. 79014847 Aerosol 79014824 Qt. 79014845 Aerosol California Delers Use 79023274 Gal. (Low V.O.C.) 79023275 Qt. (Low V.O.C.) All Machines 1981 up to 2007 All Machines Effective 2007 All Machines 1980 & prior GLEANER Effective Combines 2007 R65, R75, A65, A75, A85 Effective Combines 1998 through 2006 R42, R52, R62, R72, R55, R65, R75 Fendt Tractors Loaders Hesston, GLEANER Autumn Prime 79014823 Gal. 79014824 Qt. 79014845 Aerosol California Delers Use 79023274 Gal. (Low V.O.C.) 79023275 Qt. (Low V.O.C.) Hesston Red 79015805 Gal. 79015806 Qt. 79015807 Aerosol Corporate Silver 79014801 Gal. 79014802 Qt. 79014803 Aerosol Corporate Silver 79014801 Gal. 79014802 Qt. 79014803 Aerosol Fendt Green 79017749 Qt. 79017750 Aerosol Fendt Green 79017749 Qt. 79017750 Aerosol Silver Mist Grey M1037 Hesston Off White 79014848 Aerosol Silver Mist Grey M1037 Fendt Red 79017752 Aerosol Combines Fendt Green Fendt Red Midnight Brown 79014822 Qt. 79014844 Aerosol Black (Gloss) 79014796 Gal. 79014797 Qt. 79014653 Aerosol Chassis Gray 79025173 Aerosol 79025172 Qt. 79025182 Qt. (Low V.O.C.) Chassis Gray 79025173 Aerosol 79025172 Qt. 79025182 Qt. (Low V.O.C.) 79014798 Quart Fendt Gray (Chassis) 79017753 Qt. 79017754 Aerosol 25
SAME Tractors Lamborghini Tractors Tractors Farmhand SAME Red 79015809 Qt. 79015810 Aerosol Cream 79014790 Qt. 79014657 Aerosol Landini Blue 3311965M1 Qt. 841758M1 Aerosol SAME, Farmhand Smoke Grey M1073 1907034M1 Qt. 1907035M1 Aerosol Smoke Grey M1073 1907034M1 Qt. 1907035M1 Aerosol Avio Blue (Chasis) 841755M1 Aerosol Model 2/Model 22 GL520, SL945, XL945, XL1340, XL1140, XL940, XL740 GM870, GM875 Tub Grinders Paratills / Drills Prior 2007 Paratills / Drills After 2007 All Implements Black Semi-Gloss Grind Mixers WFE III Red 79015802 Gal. 79015803 Qt. 79015804 Aerosol Rotary Cutters / Shredders WFE III Red 79015802 Gal. 79015803 Qt. 79015804 Aerosol Tye Tye Orange 566-014 Qt. 566-001 Aerosol Sunflower Massey Red SN83004117Aerosol Glencoe Green EP6495 Aerosol Loaders Renew (Valspar Labeled) John Deere Yellow REN2205GL Gal. REN2205 Aerosol Glencoe (Attachments) 26
Planters All Models Black Machine Thinner and Primers Thinner (AGCO Labeled) 79015024 Gal Thinner (AGCO Labeled) 1904947M1 Qt. Red Oxide Primer 1904943M1 Aerosol Red Oxide Primer 1904945M1 Qt. Gray Primer 79014882 Gal. 79014881 Qt. 79014483 Aerosol Hi-Temp Aluminum 79015023 Aerosol Hi-Temp Black 79014480 Aerosol Hardener (V.O.C.) 79023497 Pint Hardener (Non V.O.C.) 79022595 Pint Black Machine, Valtra Valtra Valtra Gray 79023280 Aerosol Black (Gloss) Frame 79014796 Gal. 79014797 Qt. 79014653 Aerosol Valtra Dark Brown 79023279 Aerosol 27
Massey Ferguson Massey Ferguson 135, 150, 165, 175, 180 Red M1041 154-4, 174-4S, 184-4, 194-4F Red M1041 205, 210, 220 Red M1041 254-4, 274-4, 284-4, 294-4 Red M1041 354, 364, 384, 394 Red M1041 Flint Metallic Gray M1025 830720M2 Gal. 830719M2 Qt. 841683M1 Aerosol Light Gray M1011 841680M1 Aerosol Charcoal Gray M1056 841740M1 Qt. 841739M1 Aerosol UniGray M1053 841692M1 Gal. 841717M1 Aerosol Charcoal Gray M1056 841740M1 Qt. 841739M1 Aerosol Charcoal Gray M1056 841740M1 Qt. 841739M1 Aerosol 28
Massey Ferguson Massey Ferguson (Cont'd) 240, 250, 253, 270, 283, 290, 298, 360, 362, 383, 390T, 393, 396, 398, 399 431, 451, 461, 471, 481, 491,492 Red M1041 Red M1041 Charcoal Gray M1056 841740M1 Qt. 841739M1 Aerosol 533, 543, 563, 573, 583, 593, 596 Red M1041 670, 690, 698, 699 Red M1041 1010, 1020, 1030, 1035, 1040, 1045 Red M1041 Charcoal Gray M1056 841740M1 Qt. 841739M1 Aerosol UniGray M1053 841692M1 Gal. 841717M1 Aerosol or Charcoal Gray M1056 841740M1 Qt. 841739M1 Aerosol 29
Massey Ferguson Massey Ferguson (Cont'd) 1120, 1125, 1140, 1145, 1160, 1165, 1180, 1190 Red M1041 282 Red M1041 230, 235, 245, 255, 265, 275, 285 Red M1041 231, 261 Red M1041 Silver Metallic Gray 1077727M1 Qt. 1077726M1 Aerosol Mirror Black 1077536M1 Qt. 1077728M1 Aerosol Charcoal Gray M1056 841740M1 Qt. 841739M1 Aerosol Flint Metallic Gray M1025 830720M2 Gal. 830719M2 Qt. 841683M1 Aerosol Charcoal Gray M1056 841740M1 Qt. 841739M1 Aerosol 30
Massey Ferguson Massey Ferguson (Cont'd) 231S, 241, 271, 281 Red M1041 (+99) (+99) 240S, 271, 281 Red M1041 1205, 1215, 1225 Red M1041 1210, 1220, 1230, 1233, 1235, 1240, 1250, 1260 Red M1041 1080, 1085 Red M1041 (-99) Silver Mist Gray M1037 (-99) (+99) Silver Mist Gray M1037 (-99) (+99) Bright Aluminum M1042 841687M1 Aerosol Charcoal Gray M1056 (-99) 841740M1 Qt. 841739M1 Aerosol Mirror Black 1077536M1 Qt. 1077728M1 Aerosol Charcoal Gray M1056 (-99) 841740M1 Qt. 841739M1 Aerosol Mirror Black (+99) 1077536M1 Qt. 1077728M1 Aerosol Flint Metallic Gray M1025 830720M2 Gal. 830719M2 Qt. 841683M1 Aerosol 31
Massey Ferguson Massey Ferguson (Cont'd) 1080, 1085 This is the correct one Red M1041 1100, 1130, 1150 Red M1041 1105, 1135, 1155 Red M1041 1400, 1500 Series Red M1041 Flint Metallic Gray M1025 830720M2 Gal. 830719M2 Qt. 841683M1 Aerosol Flint Metallic Gray M1025 830720M2 Gal. 830719M2 Qt. 841683M1 Aerosol Flint Metallic Gray M1025 830720M2 Gal. 830719M2 Qt. 841683M1 Aerosol Mirror Black 1077536M1 Qt. 1077728M1 Aerosol 32
Massey Ferguson Massey Ferguson (Cont'd) 2210, 2220 Red M1041 FC23, FC23FH, FC33 ZT29 & ZT33 Mower GC2300, GC2310 Red M1041 Red M1041 Red M1041 2640 Red M1041 French Silver Mist M1071 841816M1 Qt. 841818M1 Aerosol Mirror Black 1077536M1 Qt. 1077728M1 Aerosol Mirror Black 1077536M1 Qt. 1077728M1 Aerosol This color applies to rollover protection equipment also Mirror Black 1077536M1 Qt. 1077728M1 Aerosol This color applies to rollover protection equipment also Charcoal Gray M1056 841740M1 Qt. 841739M1 Aerosol 33
Massey Ferguson Massey Ferguson (Cont'd) 2675, 2705, 2745, 2775, 2805, 3505, 3525, 3545 2605, 2615, 2625, 2600 Series (New) 3050, 3060, 3070, 3090, 3120, 3140, 3630, 3650, 3660, 3680, 3690 3210, 3225, 3235, 3245, 3255 3315, 3325, 3330, 3340, 3350, 3355, 3300 Series Red M1041 Red M1041 Red M1041 Red M1041 Red M1041 French Silver Mist M1071 841816M1 Qt. 841818M1 Aerosol Flint Metalilic Gray M1025 830720M2 Gal. 830719M2 Qt. 841683M1 Aerosl Charcoal Gray M1056 841740M1 Qt. 841739M1 Aerosol 34
Massey Ferguson Massey Ferguson (Cont'd) 3415, 3425, 3430, 3435, 3445, 3450, 3455, 3400 Series Specialty Red M1041 4800, 4840, 4900 Red M1041 4200 Series Red M1041 3615, 3625, 3635, 3645 Red M1041 4300 Series Red M1041 Smoke Gray M1073 (-99') 1907034M1 Qt. 1907035M1 Aerosol (+99') Smoke Gray M1073 (-99') 1907034M1 Qt. 1907035M1 Aerosol (+99') Red M1041 651786M91 Gal. (Low V.O.C.) 651787M91 Qt. (Low V.O.C.) (Low V.O.C.) 35
Massey Ferguson Massey Ferguson (Cont'd) 4400 Series Red M1041 79016947 Aerosol 5300 Series Red M1041 5400, 6400, 7400, 8400 Series Red M1041 6100-8100 Series Red M1041 6200-8200 Series Red M1041 Smoke Gray M1073 (-99') 1907034M1 Qt. 1907035M1 Aerosol (+99') 79016947 Aerosol French Silver Mist M1071 (-97) 841816M1 Qt. 841818M1 Aerosol (+97) Charcoal Gray M1056 841740M1 Qt. 841739M1 Aerosol 36
Massey Ferguson Lawn & Garden 7, 8, 10, 12, 14, 16 Red M1041 5, 6, 626, 632 Red M1041 1200, 1450, 1650, 1655, 1855 80RT, 112LT, 114LT, 116GTX, 212GTX, 218GTX, 316GTX, 318GTX, 320GTX Red M1041 Red M1041 Combines 205, 300, 405, 510, 510 Red M1041 Industrial Yellow M1023 768976M3 Gal. 841682M2 Aerosol Flint Metalic Gray M1025 830720M2 Gal. 830719M2 Qt. 841683M1 Aerosol Charcoal Gray M1056 841740M1 Qt. 841739M1 Aerosol Not Available 37
Massey Ferguson Combines (Cont'd) 540, 550, 850, 851, 852, 860 Red M1041 750, 751, 780 Red M1041 5650 Red M1041 8450, 8460 Red M1041 8560, 8570, 9720 Red M1041 or Industrial Yellow M1023 768976M3 Gal. 841682M2 Aerosol French Silver Mist M1071 841816M1 Qt. 841818M1 Aerosol Not Available Not Available 38
Massey Ferguson Combines (Cont'd) 8680, 8780 Red M1041 9690, 9790 Prior to 2007 Red M1041 9690, 9790, 9895 Effective 2007 Red M1041 Swathers 200, 220 Red M1041 9220, 9225, 9420 Red M1041 Chassis Gray 79025173 Aerosol 79025172 Standard Qt. 79025182 Qt. (Low V.O.C.) Black (Gloss) 79014796 Gal 79014797 Qt. 79014653 Aerosol. 39
Massey Ferguson 9225, 9425, 9635 Autumn Prime 79014823 Gal. 79014821 Qt. 79014845 Aerosol 79023271 2.8 V.O.C. Gal. 79023275 2.8 V.O.C. Qt. Hay Tools All machines Red M1041 Industrial Models Chassis Gray 79025173 Aerosol 79025172 Qt. 79025182 Qt. (Low V.O.C.) 20, 20C, 20D, 30, 30B, 30D, 31, 40, 40B, 50A, 50C, 50D, 60, 70, 80, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165 20E, 20F, 30E, 30H, 40E, 50E, 50F, 50H./HX Ser. S & 50H/HX Ser. T, 60H/HX Ser. S & 60H/HX Ser. T Back Hoes Construction Yellow M1055 841729M1 Gal. 841730M1 Aerosol Industrial Yellow M1023 768976M3 Gal. 841682M2 Aerosol Forklifts 200, 2500, 4500, 6500 Construction Yellow M1055 841729M1 Gal. 841730M1 Aerosol 6500H, 6800H Industrial Yellow M1023 768976M3 Gal. 841682M2 Aerosol 40
Massey Ferguson Loaders Equipment Arms Bucket Massey Ferguson Loaders Red M1041 (Low V.O.C.) Pint Thinner and Primers Thinner (AGCO Labeled) 79015024 Gal Thinner (AGCO Labeled) 1904947M1 Qt. Red Oxide Primer 1904943M1 Aerosol Red Oxide Primer 1904945M1 Qt. Gray Primer 79014882 Gal. 79014881 Qt. 79014483 Aerosol Hi-Temp Aluminum 79015023 Aerosol Hi-Temp Black 79014480 Aerosol Hardener (V.O.C.) 79023497 Pint Hardener (Non V.O.C.) 79022595 Pint 41
Challenger Challenger MT200 Series MT200B MT300 Series MT330B MT400 Series MT400B, MT400BR MT500 Series MT500B, MT500BR MT600 Series MT600B MT700 Series MT700B Series MT800 Series Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Gloss (Black) 79014796 Gal. 79014797 Qt. 79014653 Aerosol Gloss (Black) 79014796 Gal. 79014797 Qt. 79014653 Aerosol Gloss (Black) 79014796 Gal. 79014797 Qt. 79014653 Aerosol Mirror Black 1077536M1 Qt. 1077728M1 Aerosol Charcoal Gray (same as Challenger Gray) 171-9773 Gal. 173-4060 Aeosol Charcoal Gray (same as Challenger Gray) 171-9773 Gal. 173-4060 Aeosol Charcoal Gray (same as Challenger Gray) 171-9773 Gal. 173-4060 Aeosol 42
Challenger Challenger (Cont'd) MT800B Series MT900 Series Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Gloss (Black) 79014796 Gal. 79014797 Qt. 79014653 Aerosol Silver Mist (TBA) Charcoal Gray (same as Challenger Gray) 171-9773 Gal. 173-4060 Aerosol Charcoal Gray (same as Challenger Gray) 171-9773 Gal. 173-4060 Aerosol Black (Gloss) 79014796 Gal. 79014797 Qt. 79014653 Aerosol Combines 660, 670 Prior 2007 Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol 660, 670 Effective 2007 680B Effective 2007 Swathers SP80, SP110, SP115, SP85, SP165, SP180 SP85B, SP115B, SP185B Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Chassis Gray 79025173 Aerosol 79025172 Standard Qt. 79025182 Qt. (Low V.O.C.) Black (Gloss) 79014796 Gal.. 79014797 Qt. 79014653 Aerosol Chassis Gray 79025173 Aerosol 79025172 Standard Qt. 79025182 Qt. (Low V.O.C.) 43
Hay Tools All Machines 2007 All Machines Effective 2007 Loaders Challenger Prior Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Equipment Arms Bucket ALO Loader Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol SOO Loader Prior to 2005 SOO Loader 2005 to Current Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Challenger Yellow 79023276 Gal. (Low V.O.C.) 79023277 Qt. (Low V.O.C.) 79023278 Aerosol Black 79014796 Gal. 79014797 Qt. 79014653 Aerosol Black Semi-Gloss 79014654Aerosol Black (Gloss) 79014796 Gal.. 79014797 Qt. 79014653 Aerosol Chassis Gray 79025173 Aerosol 79025172 Standard Qt. 79025182 Qt. (Low V.O.C.) Thinner and Primers Thinner (AGCO Labeled) Thinner (AGCO Labeled) Red Oxide Primer Red Oxide Primer Gray Primer Hi-Temp Aluminum Hi-Temp Black Hardener (V.O.C.) Hardener (Non V.O.C.) 79015024 Gal 1904947M1 Qt. 1904943M1 Aerosol 1904945M1 Qt. 79014882 Gal. 79014881 Qt. 79014483 Aerosol 79015023 Aerosol 79014480 Aerosol 79023497 Pint 79022595 Pint 44
Willmar Ag-Chem 750, 750A White WR20937 Qt. WR17503 Aerosol 760 White WR20937 Qt. WR17503 Aerosol 745, 765 White WR20937 Qt. WR17503 Aerosol 765HT White WR20937 Qt. WR17503 Aerosol 785 White WR20937 Qt. WR17503 Aerosol 6200 Wiltone WR33588 Qt. WR33585 Aerosol White (+98) WR20937 Qt. WR17503 Aerosol 6400 Wiltone WR33588 Qt. WR33585 Aerosol White (+98) WR20937 Qt. WR17503 Aerosol 7200, 7250 Wiltone WR33588 Qt. WR33585 Aerosol White (+98) WR20937 Qt. WR17503 Aerosol 7400, 7450 Wiltone WR33588 Qt. WR33585 Aerosol White (+98) WR20937 Qt. WR17503 Aerosol 8100, 8200 Wiltone WR33588 Qt. WR33585 Aerosol White (+98) WR20937 Qt. WR17503 Aerosol 8400, 8450 Wiltone WR33588 Qt. WR33585 Aerosol Sprayers White WR20937 Qt. WR17503 Aerosol White WR20937 Qt. WR17503 Aerosol White WR20937 Qt. WR17503 Aerosol White WR20937 Qt. WR17503 Aerosol White WR20937 Qt. WR17503 Aerosol Wiltone WR33588 Qt. WR33585 Aerosol Wiltone WR33588 Qt. WR33585 Aerosol Wiltone WR33588 Qt. WR33585 Aerosol Wiltone WR33588 Qt. WR33585 Aerosol Wiltone WR33588 Qt. WR33585 Aerosol Wiltone WR33588 Qt. WR33585 Aerosol 45
Ag-Chem Sprayers (Cont'd) 8500, Eagle 8500 White WR20937 Qt. WR33585 Aerosol 8600 White WR20937 Qt. WR33585 Aerosol Wrangler Orange WR20936 Qt. WR17503 Aerosol 4300 Yellow WR35372 Qt. WR35369 Aerosol 4500, 4550 Yellow WR35372 Qt. WR35369 Aerosol Spra-Coupe 100, 103, 104 White 6722788 Qt. 6722789 Aerosol 115, 116, 120 White 6722788 Qt. 6722789 Aerosol 210 White 6722788 Qt. 6722789 Aerosol 215 White 6722788 Qt. 6722789 Aerosol 216 White 6722788 Qt. 6722789 Aerosol 218 White 6722788 Qt. 6722789 Aerosol 220, 230 White 6722788 Qt. 6722789 Aerosol 3430, 3630 White 6722788 Qt. 6722789 Aerosol 3450, 3650 White 6722788 Qt. 6722789 Aerosol White WR20937 Qt. WR33585 Aerosol White WR20937 Qt. WR33585 Aerosol Loaders Orange WR20936 Qt. WR17503 Aerosol Yellow WR35372 Qt. WR35369 Aerosol Yellow WR35372 Qt. WR35369 Aerosol White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol Charcoal 6722785 Qt. 6722786 Aerosol Charcoal 6722785 Qt. 6722786 Aerosol Charcoal 6722785 Qt. 6722786 Aerosol Charcoal 6722785 Qt. 6722786 Aerosol Charcoal 6722785 Qt. 6722786 Aerosol Charcoal 6722785 Qt. 6722786 Aerosol Charcoal 6722785 Qt. 6722786 Aerosol Charcoal 6722785 Qt. 6722786 Aerosol Charcoal 6722785 Qt. 6722786 Aerosol 46
Ag-Chem Spra-Coupe (Cont'd) 3440, 3640 White 6722788 Qt. 6722789 Aerosol 4440, 4640 White 6722788 Qt. 6722789 Aerosol 4450MT, 4650MT 4450AT, 4650AT SC4455, SC4655, SC7450, SC7655 White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol Thinner and Primers Thinner (AGCO Labeled) 79015024 Gal Thinner (AGCO Labeled) 1904947M1 Qt. Red Oxide Primer 1904943M1 Aerosol Red Oxide Primer 1904945M1 Aerosol Gray Primer 79014882 Gal. 79014881 Qt. 79014483 Aerosol Hi-Temp Aluminum Hi-Temp Black Hardener (Non V.O.C.) Hardener (V.O.C.) 79015023 Aerosol 79014480 Aerosol 79022595 Pint 79023497 Pint White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol White 6722788 Qt. 6722789 Aerosol Charcoal 6722785 Qt. 6722786 Aerosol (+98)Black Black (Gloss) 79014796 Gal. 79014797 Qt. 79014653 Aerosol Black (Gloss) 79014796 Gal. 79014797 Qt. 79014653 Aerosol Black (Gloss) 79014796 Gal. 79014797 Qt. 79014653 Aerosol Black (Gloss) 79014796 Gal. 79014797 Qt. 79014653 Aerosol 47
Ag-Chem Ag-Chem Ag-Chem Yellow Ag-Chem White Acrylic Paint Acrylic Paint Enamel Paint RoGators 663 AG516118 AG516120 AG511234 664 AG516118 AG516120 AG511234 844 AG516118 AG516120 AG511234 854 AG516118 AG516120 AG511234 1054 AG516118 AG516120 AG511234 1254 AG516118 AG516120 AG511234 864 AG516118 AG516120 AG511234 1064 AG516118 AG516120 AG511234 1264 AG516118 AG516120 AG511234 874, S874 AG516118 AG516120 AG511234 1074. 1074C AG516118 AG516120 AG511234 SS1074, SSC1074 AG516118 AG516120 AG511234 1286C AG516118 AG516120 AG511234 Ag-Chem Yellow Ag-Chem White Acrylic Paint Acrylic Paint Enamel Paint TerraGators 1253 AG516118 AG516120 AG511234 1603 AG516118 AG516120 AG511234 1703 AG516118 AG516120 AG511234 1803 AG516118 AG516120 AG511234 1804 AG516118 AG516120 AG511234 1903 AG516118 AG516120 AG511234 1844 AG516118 AG516120 AG511234 3104 AG516118 AG516120 AG511234 2004 AG516118 AG516120 AG511234 2204 AG516118 AG516120 AG511234 0004 AG516118 AG516120 AG511234 2505 AG516118 AG516120 AG511234 1004 AG516118 AG516120 AG511234 6103 AG516118 AG516120 AG511234 8103 AG516118 AG516120 AG511234 9103 AG516118 AG516120 AG511234 8104 AG516118 AG516120 AG511234 8144 AG516118 AG516120 AG511234 9103 AG516118 AG516120 AG511234 9105 AG516118 AG516120 AG511234 6203 AG516118 AG516120 AG511234 8203, 8204, 8244 AG516118 AG516120 AG511234 9203 AG516118 AG516120 AG511234 Lor-Al Easy Rider 6300 Easy Rider 6400 L060867 L060867 48
Sunflower Equipment Sheet Metal Rims Misc./Trim Flex-King Models All Sunflower Models Richardton (North Dakota) Tillage Clover White (Light Green) 79014806 Qt. 79014832 Gal., New Idea Green (Dark Green) 17221 Qt. 15960 Aerosol Sunflower Massey Red SN83004117 Aerosol Meadow Green 79014831 Aerosol 79014804 Gal. Renew (Valspar Labeled) John Deere Yellow REN2205GL Gal. REN2205 Aerosol Renew (Valspar Labeled) John Deere Yellow REN2205GL Gal. REN2205 Aerosol Dump Wagons Renew (Valspar Labeled) John Deere Yellow REN2205GL Gal. REN2205 Aerosol Black (Gloss) 79014796 Gal. 79014797 Qt. 79014653 Aerosol Black (Gloss) 79014796 Gal. 79014797 Qt. 79014653 Aerosol Richardton Sunflower Massey Red SN83004117 Aerosol Renew (Valspar Labeled) John Deere Yellow REN2205GL Gal. REN2205 Aerosol All Models Sunflower Massey Red SN83004117 Aerosol Grain Carts Renew (Valspar Labeled) John Deere Yellow REN2205GL Gal. REN2205 Aerosol 49
Paint Index Description Size Part No. Pkg Qty Ref. Guide Page No. Aluminum Aerosol 79014652 6 15, 16, 17 Aluminum Quart 79014795 4 15, 16, 17 Argent Silver Aerosol 79014836 6 11, 21 Argent Silver Quart 79014811 4 11, 21 Argent Silver Gallon 79014810 2 11, 21 Autumn Prime Aerosol 79014845 6 25, 40 Autumn Prime Quart 79014824 4 25, 40 Autumn Prime Gallon 79014823 2 25, 40 Autumn Prime (Low V.O.C.*) Quart 79023275 4 25, 40 Autumn Prime (Low V.O.C.*) Gallon 79023274 2 25, 40 Avio Blue Aerosol 841755M1 6 26 Bittersweet Aerosol 15959 6 23, 24 Bittersweet Quart 17223 4 23, 24 Black (Gloss) Aerosol 79014653 6 11, 21, 27, 39, 42, 43, 44,47, 49 Black (Gloss) Quart 79014797 4 11, 21, 27, 39, 42, 43, 44,47, 49 Black (Gloss) Gallon 79014796 2 11, 21, 27, 39, 42, 43, 44,47, 49 Aerosol 79014654 6 11, 12, 13, 15, 16, 17, 21, 22, 25, 26, 27, 29, 31, 33, 34, 35, 36, 38, 39, 40, 41, 42, 43, 44, 45, 46 Quart 79014798 4 11, 12, 13, 15, 16, 17, 21, 22, 25, 26, 27, 29, 31, 33, 34, 35, 36, 38, 39, 40, 41, 42, 43, 44, 45, 46 Aerosol 79014833 6 21 22, 23, 24, 26, 27 Quart 79014807 4 21 22, 23, 24, 26, 27 Bright Aluminum M1042 Aerosol 841687M1 6 31, 32 Cascade White Aerosol 79014847 6 25 Challenger Yellow Aerosol 79023278 6 42, 43, 44 Challenger Yellow (Low V.O.C.) Quart 79023277 4 42, 43, 44 Challenger Yellow (Low V.O.C.) Gallon 79023276 2 42, 43, 44 Charcoal (Spra-Coupe) Aerosol 6722786 6 46, 47 Charcoal (Spra-Coupe) Quart 6722785 4 46, 47 Charcoal Gray Aerosol 79014839 6 21, 22, Charcoal Gray Quart 79014816 4 21, 22, Charcoal Gray (Challenger Gray) Aerosol 173-4060 12 42, 43 Charcoal Gray (Challenger Gray) Gallon 171-9773 4 42, 43 Charcoal Gray M1056 Aerosol 841739M1 6 28, 29, 30, 31, 34, 36, 37 Charcoal Gray M1056 Quart 841740M1 4 28, 29, 30, 31, 34, 36, 37 Charcoal Gray Metallic Aerosol 79014838 6 21 Charcoal Gray Metallic Quart 79014815 4 21 Chassis Gray Aerosol 79025173 6 25, 39, 40, 44 Chassis Gray Quart 79025172 4 25, 39, 40, 44 Chassis Gray (Low V.O.C.) Quart 79025182 4 25, 39, 40, 44 50
Paint Index Description Size Part No. Pkg Qty Ref. Guide Page No. Cloud White Aerosol 79014655 6 11, 20 Clover White Aerosol 79014832 6 22 Clover White Quart 79014806 4 22 Combine Red Aerosol 20-7002255 6 22 Combine Red Quart 20-7002850 4 22 Construction Yellow M1055 Aerosol 841730M1 6 40 Construction Yellow M1055 Gallon 841729M1 2 40 Corporate Orange Aerosol 79014656 6 11, 12, 13, 14, 15, 16, 17, 20 Corporate Orange Quart 79014782 4 11, 12, 13, 14, 15, 16, 17, 20 Corporate Orange Gallon 79014781 2 11, 12, 13, 14, 15, 16, 17, 20 Corporate Orange (Low V.O.C.) Quart 79023273 4 11, 12, 13, 14, 15, 16, 17, Corporate Orange (Low V.O.C.) Gallon 79023272 2 Corporate Silver Aerosol 79014803 6 12, 21, 25 Corporate Silver Quart 79014802 4 12, 21, 25 Corporate Silver Gallon 79014801 2 12, 21, 25 Quart 79016946 4 Aerosol 79016947 6 20 11, 12, 13, 14, 15, 16, 17, 20 12, 13, 21, 22, 29, 32, 33, 35, 36, 42 12, 13, 21, 22, 29, 32, 33, 35, 36, 42 Cream Aerosol 79014657 6 14, 15, 18, 20 Cream Quart 79014790 4 14, 15, 18, 20 Fendt Gray Aerosol 79017754 6 25 Fendt Gray Quart 79017753 4 25 Fendt Green Aerosol 79017750 6 25 Fendt Green Quart 79017749 4 25 Fendt Red Aerosol 79017752 6 25 Flint Metallic Gray M1025 Aerosol 841683M1 6 28, 30, 31, 32, 34, 37 Flint Metallic Gray M1025 Quart 830719M2 4 28, 30, 31, 32, 34, 37 Flint Metallic Gray M1025 Gallon 830720M2 2 28, 30, 31, 32, 34, 37 French Silver Mist M1071 Aerosol 841818M1 6 33, 34, 36 French Silver Mist M1071 Quart 841816M1 4 33, 34, 36 Glencoe Green Aerosol EP6495 6 26 Gray Primer Aerosol 79014483 6 20, 27, 41, 44, 47 Gray Primer Quart 79014481 4 20, 27, 41, 44, 47 Gray Primer Gallon 79014482 2 20, 27, 41, 44, 47 Gun Metal Blue Aerosol 79014659 6 11, 13, 14 Gun Metal Blue Quart 79014788 4 11, 13, 14 Hardner (Valspar Labeled) (Non V.O.C.) Pint 79022595 6 20, 27, 41, 44, 47 Hardener (Valspar Labeled) 79023497 6 11, 12, 13, 14, 15, 16, 17, 20, 25, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 47 Hesston Off White Aerosol 79014848 6 25 51
Paint Index Description Size Part No. Pkg Qty Ref. Guide Page No. Hesston Red Gallon 79015805 2 25 Hesston Red Aerosol 79015807 6 25 Hesston Red Quart 79015806 4 25 Hi-Temp Aluminum Aerosol 79015023 6 20, 27, 41, 44, 47 Hi-Temp Black Aerosol 79014480 6 20, 27, 41, 44, 47 Industrial Yellow Aerosol 841682M2 6 21, 37, 40 Industrial Yellow Gallon 768976M3 2 21, 37, 40 John Deere Yellow (Renew Brand) Aerosol REN2205 6 26 John Deere Yellow (Renew Brand) Gallon REN2205GL 2 26 Maroon Aerosol 79014660 6 15, 18 Meadow Green Aerosol 79014831 6 21, 22 Meadow Green Quart 79014805 4 21, 22 Meadow Green Gallon 79014804 2 21, 22 Midnight Brown Aerosol 79014844 6 25 Midnight Brown Quart 79014822 4 25 Mirror Black Aerosol 1077728M1 6 30, 31, 32, 33, 42 Mirror Black Quart 1077536M1 4 30, 31, 32, 33, 42 New Idea Buff Aerosol 15961 6 23, 24 New Idea Buff Quart 17225 4 23, 24 New Idea Green Aerosol 15960 6 23 New Idea Green Quart 17221 4 23 New Idea Light Gray Aerosol 17565 6 22, 23, 24 New Idea Light Gray Quart 17586 4 22, 23, 24 Orange (Willmar) Quart WR20936 4 46 Orange (Willmar) Aerosol WR17504 6 46 Pearl Gray Aerosol 79014663 6 11, 13, 14, 20 Pearl Gray Quart 79014800 4 11, 13, 14, 20 Quart 79021641 4 11, 18, 19, 20 Persian Orange Aerosol 79014664 6 11, 17, 18, 19, 20 Persian Orange Quart 79014785 4 11, 17, 18, 19, 20 Red M1041 Aerosol 1906406M2 6 Red M1041 Quart 830707M5 4 Red M1041 Gallon 830708M5 2 Red M1041 (Low V.O.C.) Quart 651787M91 4 Red M1041 (Low V.O.C.) Gallon 651786M91 2 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41 Red Oxide Primer Aerosol 1904943M1 6 20, 27, 41, 44, 47 Red Oxide Primer Quart 1904945M1 4 20, 27, 41, 44, 47 SAME Red Aerosol 79015810 6 26 SAME Red Quart 79015809 4 26 Silver Metallic Gray Aerosol 1077726M1 6 30 52
Paint Index Description Size Part No. Pkg Qty Ref. Guide Page No. Silver Metallic Gray Quart 1077727M1 4 30 Aerosol 841686M1 6 25, 28, 29, 30, 31, 32, 34, 35, 37, 38, 39, 40, 43, 44 Quart 841556M2 4 25, 28, 29, 30, 31, 32, 34, 35, 37, 38, 39, 40, 43, 44 Smoke Gray M1073 Aerosol 1907035M1 6 26, 35, 36 Smoke Gray M1073 Quart 1907034M1 4 26, 35, 36 Spring Green Aerosol 79014665 6 13, 14, Spring Green Quart 79014784 4 13, 14, Spring Green Gallon 79014783 2 13, 14, Sunflower Massey Red Aerosol SN83004117 1 26 Thinner (AGCO Parts Brand) Quart 1904947M1 6 20, 27, 41, 44, 47 Thinner (AGCO Parts Brand) Gallon 79015024 2 20, 27, 41, 44, 47 Tye Orange Aerosol 566-001 6 26 Tye Orange Quart 566-014 4 26 UniGray M1053 Aerosol 841717M1 6 28, 29 UniGray M1053 Gallon 841692M1 2 28, 29 WFE III Red Aerosol 79015804 6 21, 22, 23, 24, 26 WFE III Red Quart 79015803 4 21, 22, 23, 24, 26 WFE III Red Gallon 79015802 2 21, 22, 23, 24, 26 White (Spra-Coupe) Aerosol 6722789 6 46, 47 White (Spra-Coupe) Quart 6722788 6 46, 47 White (Wilmar) Aerosol WR17503 6 45, 46 White (Wilmar) Quart WR20937 4 45, 46 Wiltone Aerosol WR33585 6 45 Wiltone Quart WR33588 4 45 Ag-Chem PDC Paint Flat Black Aerosol AG513704 1 Flat Black (Enamel) Gallon AG511250 1 Primer (Enamel) Aerosol AG513702 1 Primer (Enamel) Gallon AG511293 1 Primer Kit (Urethane) AG516121 1 Kit Yellow Urethane Aerosol AG513210 1 Yellow Urethane Kit Gallon AG511242 4 Yellow Urethane 1 Qt. / 1 Gal. AG516118 1 Kit White Aerosol AG513703 1 White Gallon AG511234 4 White 1 Qt. / 1 Gal. AG516120 1 Kit Miscellaneous PDC Paint AGCO Orange Aerosol 79018733 6 AGCO Orange Quart 79018734 4 AGCO Orange Gallon 79018735 2 Case IH Red (Renew Brand) Aerosol REN2206 6 Case IH Red (Renew Brand) Gallon REN2206GL 2 Charolois White Aerosol 79014846 6 53
Paint Index Description Size Part No. Pkg Qty Ref. Guide Page No. Miscellaneous PDC Paint (Cont'd) Charolois White Quart 79014826 4 Flint Gray M1026 Aerosol 841684M1 6 Gray Aluminum Quart 3310822M1 4 Gray Semi-Gloss Aerosol 79014658 6 John Deere Green (Renew Brand) Aerosol REN2204 6 John Deere Green (Renew Brand) Gallon REN2204GL 2 Kubota Orange (Renew Brand) Aerosol REN2218 6 Landini blue Aerosol 841758M1 6 Landini blue Quart 3311965M1 4 Light Gray M1011 Aerosol 841680M1 6 New Holland Blue (Renew Brand) Aerosol REN2215 6 New Holland Red (Renew Brand) Aerosol REN2217 6 New White Aerosol 79014661 6 New White Quart 79014793 4 Orange (Spra-Coupe) Aerosol 6722783 6 Orange (Spra-Coupe) Quart 6722782 6 Plow Base Black Aerosol 20-7002264 6 Prairie Gold Aerosol 79014834 6 Prairie Gold Quart 79014808 4 Red (Spra-Coupe) Aerosol 6722790 6 Saddle Brown** Aerosol 79017235 6 Slate Gray M1074 Aerosol 79016948 6 Southbend Red Aerosol 20-7002256 6 Valtra Dark Brown Aerosol 79023279 6 Valtra Gray Aerosol 79023280 6 Yellow (Willmar) Aerosol WR35369 6 Yellow (Willmar) Quart WR35372 4 Yellow (American Series) Aerosol 841682M2 6 Yellow (American Series) Quart 79014809 4 * V.O.C. - The contents of this paint contains no more than 2.8% of volitile ** Intended for use on interior vinyl panels. 54
Paint Application Reference Guide www.agcoparts.com Printed in the USA (11/07) 2007 AGCO Corporation Part No. 79028641