Introduction 2015 Prices Valid from 12/1/15. Our first price increase since 2011 we have tried to keep increases to a minimum. 2 We have been very busy during the last year and our website continues to bring in more new business from overseas as well as the UK... Thank you for all of your Custom During the year Peter sailed in the Swiss Open 10r Nationals attaining 1st place with his Tension.. He also won the UK 10R National Championship sailing his Tension. Jurgen Peters From Germany won the German Marblehead Nationals using Our Sails, (well done Jurgen ). Devolopment. During the year we have designed a new one metre which is now available for sale. It was sailed for the first time in competition at the beginning of this year and proved to be no slouch. Details on page 11. We have also developed our own Winch which has been out now for some time and has shown to be reliable, powerful and economical on battery power. Details on page 20. There are also several new fittings included in the catalogue. Designs available. The New One metre TOSCAR which is sold in kit form and is also available ready built, Details on Page 11. (1m) KRCAR, ( 1m) OSCAR, 36R BAMBINO, details on page 13. RG65 PUMA, MARBLEHEAD COMPOSITE, 10r TENSION and A CLASS SWEET. Some details of these boats are in the catalogue and separate kit lists are available on request. details on page14. We manufacture hulls, fins, rudders, leads, fittings & now Winches and most of these are kept in stock. We also stock Aluminium tube and carbon tube for masts and booms and other raw materials. In fact nearly everything you will need to build a racing yacht. Our range is always being updated to improve performance, and also make the best use of new materials when they become available. Sails are all made to order, selection of cloths available and samples can be supplied on request. Coloured dacron is available, at an additional cost of 1 per panel also coloured luff tape and corners at no additional cost. However finger patches add 5 per suit. Special sails for the non-standard hull can be made to order, just drop us a note with the details and we will quote. Delivery times: Fittings, (our PW range are our own made) are all sent out by First Class post and are usually sent out within a couple of days of ordering depending on our stock levels. Masts and boom tubes usually in stock are sent out by either parcel post up to 1.5m or by carrier, (see inside back cover for charges). Mouldings, fins and rudders are often stocked but may take longer if not in stock, as with Hulls which are moulded to order. Sails, Delivery time on sails is 10/12 weeks and can be longer, sent by first class mail in 4 cardboard tubes.
3 Sails conform to ISAF rules Order all 3 suits together and deduct 5. from the total plus post and packing. Sails are available in Scrim, Satin Film and traditional Dacron. Top Suit Scrim or Satin Film 60.50 Working Suit Dacron 51.00 class Scrim or Satin Film 54.00 Storm Suit Dacron 43.00 Scrim 46.00 Luff Finishes Sails available with either eyelets, tabs or hooks to suit either rings, groovy or jackline. Coloured luff tape is available on request. finger patches add 6.00 per suit Rig Kits. Complete set of fittings including round aluminum mast, booms and sails to make up a rig for through deck mounting. Delux rigs include ball raced gooseneck, rotating headboard support & clip on spreader. The deluxetop Rig will include new light weight mast. Top Rig. Scrim 121.00 Delux 143.00 Working Dacron 105.50 Scrim 108.50 Delux 129.00 Storm Dacron 98.00 Scrim 101.00 Rig Bags. See page 18 registration Numbers see page 8. 1M
SAILS CONFORM TO ISAF RULING. Sails available in 300/500 & 325/475 Ratio Also 3 different SWING RIG TYPES 4 Mclass Luff Height Plain Panelled Mylar Scrim Light Air...Dacron Dacron & Composite & Super light Dacron Top Suit 800 2030 73.00 83.00 99.00 1900 73.00 83.00 99.00 1800 67.50 78.00 Working Suit 800 1650 64.00 73.00 1450 64.00 73.00 Storm Suit 700 1450 51.00 59.00 69.50 Storm Suit 600 l250 51.00 59.00 69.50 Storm Suit 450 950 46.00 55.50 65.00 LUFF FINISHES. These sails are available with either Eyelets, Tabs or Hooks to suit either rings, groovy or jackline. Coloured luff tape or cloth is available on request. Light air sails are normally made of light scrim or film. Super light sails are made of 36 or 23 Micron film, with necessary strengthening. For Registration numbers see Page 8.
M swing rigs 5 Each rig is supplied with carbon fibre mast & alloy booms & all necessary fittings. Sails can be panelled dacron or panelled scrim. Please specify tube size rig is to fit and ratio of sails required. Centring plug should be ordered separately. Working Rig. 800 Luff 65 Dacron sails 146.00 Scrim sails 155.50 Dumpy Working. 800 Luff 57 Dacron sails 146.00 Scrim sails 155.50 Storm. 700 Luff 57 Dacron sails 142.00 Scrim sails 151.00 Storm 600 Luff 49 Dacron sails 142.00 Scrim sails 151.00 Storm 500 Luff 41.3 Dacron sails 133.00 Scrim sails 141.50 Off Set Rigs. Use same mounting hole as swing rig. Add 2. to above costs. M Shroudless rigs Bags to protect /transport your swing & shroudless rigs. See page 9 Top Rig. 83 Luff 177.00 c/f section mast. Scrim sails, satin film Total weight approx. 350 grms. Special light wt Rig with composite light wt sails, bent c/f boom, jib gadget & c/f section mast weight app. 260 grms. 229.00 Intermediate Rig. 73 Luff with 2 piece c/f mast 168.00 Approx. weight of rig 356 grms. Working Rig. 67 Luff. Panelled Dacron Sails 152.50 Scrim sails 161.00 With 2 piece c/f mast Storm Rig. 57 Luff 700sq Panelled dacron 142.00 Scrim sails 152.50 With 2 piece c/f mast Storm Rig. 49 Luff 600sq Panelled Dacron 137.50 Scrim sails 147.00 With 2 piece c/f mast. All rigs are supplied with necessary fittings & bearings. Aluminium masts are available in place of c/f for economy rigs. Prices on request. For Registration numbers see Page 8.
Because of the rules that govern the class in the way sail area is measured it is worthwhile paying particular attention to the jib size and shape to maximise the area possible within the fore triangle. Light Weight Top Suit Satin or Light Scrim 103.00 Top Suit Panelled scrim or dacron 93.00 Second Suit up to 72 Panelled Dacron 77.00 Panelled scrim 81.00 Plain Dacron 67.00 Third Suit up to 60 Panelled Dacron 71.50 Panelled scrim 77.00 Plain Dacron 61.00 Fourth Suit Panelled scrim 66.00 For Registrations numbers see Page 8. Light Air Top Suit in scrim or satin 95.00. Panelled Top Suit in scrim or Satin. 86.00 Second Suit up to 1700cm Panelled Dacron 64.00 Scrim 72.00 Third Suit up to 1300cm Panelled Dacron 59.50 Scrim 66.00 Luff Finishes Sails available in luff cord eyelets or hooks. Coloured luff tape or ccloth available on request. 6 10R class A class For Registration Numbers see page 8 For rig bags see page 9 Because of the 10r class rules the sail sizes and shapes can vary enormously, depending on the boat and what you want to achieve in certain conditions. There is no restriction on battening and it is possible on 2nd and 3rd suits to fully batten thereby providing for better control of sail shape and less distortion. This battening would add 10.00 to the cost of each suit.
Because of the lack of restriction on the sail plan for the 36r, the sail shape and area can vary enormously. Sails can be made to your own design and size, for conventional rig, una rig or swing rig Luff Height. Plain. Panelled. Panelled Light Air &......Dacron Dacron Scrim & Super Light... Composite...Dacron 65 Top Suit 57.00 61.50 75.00 63 55.00 61.50 75.00 59 55.00 58.50 75.00 55 Working 51.00 56.00 53 51.00 56.00 50 51.00 56.00 44 Storm 28.00 45.00 49.50 40 28.00 45.00 49.50 Luff Finishes. These sails are available with either luff cord, eyelets or hooks. Coloured luff tape or cloth is available on request. Light Air Sails are normally made of satin film or light scrim. Super light sails are made of 36 micron or 23 micron film iwith necessary strengthening. Rigs Bags. Single pocket 23.00. Double pocket 25.00. Triple pocket 27.00. 7 36 class 6m class Light Weight Top Suit Scrim 89.50 Top Suit Panelled Dacron 75.00 Panelled scrim 80.00 Second Suit up to 58 Panelled Dacron 72.00 Panelled scrim 77.00 Third suit,up to 48 Panelled Dacron 67.00 Panelled scrim 71.00 Plain Dacron 59.00
Smaraag Top suit Dacron or Scrim 68.50 All numbers are black self-adhesive. Class Insignia for 36, M, 10r, 6m & A 30p each 1 Metre class insignia 30p each Mini 40 insignia 50p each J Insignia 50p each Boat no. GBR ---- 2.20 ISAF Class sail Numbers, 105mm high, Silver backed numbers (reduces visibility of numbers from opposite side) 45p each National letters GBR in a strip pre-spaced also others on request 70p each Complete set supplied & fitted (national letters, 2 digit nos. & insignia) 9.00
9 Sail Making Materials White Dacron 140 gram wt 36 wide 11.50 per mtr run 160gram, wt 36 wide 11.50 per mtr run 180gram, wt 36 wide 11.50 per mtr run Coloured Dacrons 3.8 oz wt 36 wide 11.50 per mtr run Laminate (scrim) T70 48 wide approx. 1.3 oz 12.00 per mtr run Laminate (scrim) T40 48 wide 0.9 oz 12.50 per mtr run Laminate (scrim) T54 48 wide 1.1 oz 11.50 per mtr run Laminate scrim PM02/ m190 54 wide l.9oz 18.00 per mtr run Laminate scrim PM05/ m240 54 wide 2.4oz 18.00 per mtr run Satin Film New Minimum quantity 5 metre off the Roll. Satin Film 23 micron 513 mm wide 2.20 per mtr run Satin Film 36 micron 650 mm wide 2.75 per mtre run Satin Film 50 micron 530 mm wide 2.20 per mtr run Satin Film 75 micron 750 mm wide 3.50 per mtr run DECK PATCH Polyester Self Adhesive Deck Patch material 2.1 oz weight. 19.00 per m run Cut from a roll 54 wide, Equiv. to 13.86 per m sq. or 6.93 per ½ m sq. Can be cut to Various lengths, Suitable for deck patches and sail corner stiffening. colours available White, Royal Blue, Navy Blue, Pink, Green, Orange, Black, Yellow, Red and Grey. Tapes 1/2 wide self adhesive white luff tape per metre 0.42 1/2 wide self adhesive white luff tape 50 yard reel 9.50 1 wide self adhesive luff tape various colours per m 0.70 1 wide self-adhesive cloth tape, Sticks to Wet Surfaces Ideal for repairs to decking or hull, 10 metre reel 4.35 1/4 wide clear mylar tape for leaches 50 metre reel 4.65 1/4 wide seamstick (for seams) 50m reel 7.95 1/4 wide self adhesive white luff tape 50 yd reel 5.50 9mm wide seamstick 50 m reel 11.90 9mm wide mylar tape 50 m reel 5.50 Bolt rope in tape ready to sew on, per metre 4.00
Mast & booms Carbon Fibre Tapered Tubes. Please check for availability. Heavy Duty Tapered Mast One Piece 2.35 metres long, weight 160 grms. (for A boats) 92.00 High Modulace (9.0mm dia top, 14.0mm dia base), length 2.35 metres, weight 84 grms. 97.00 Parallel c/f tubes (available in up to 2m lengths). 16mm Tube 1.0mm wall weight 80gms. 1m long 25.00 14mm Tube, 1.0mm wall, weight 60grms. 1m long 23.00 12mm Tube, 1.0mm wall, weight 49gtms. 1m long 21.00 10mm Tube, 1.0mm wall, weight 38grms. 1m long 15.00 8 mm Tube, 1.0mm wall, weight 34grms. 1m long 14.00 6 mm Tube, 1.0.mm wall, 1 metre long 7.00 Booms Carbon Fibre Rectangular Bent Boom tube suit A class 38.00 Carbon Fibre Rectangular Straight Boom tube suit A class 36.00 Keel Tube for A Boats 15mm o/d 2mm wall, 400mm long 16.00 Keel Socket Tube, takes keel tube, 8 long 5.00 Carbon Fibre Rods. 1.5mm Rod per metre 3.25 3.0mm Rod per metre 4.10 4.0mm Rod per metre 4.85 6.0mm Rod per metre 6.40 Aluminium Mast and Booms Round. 3/4 dia Mill finish 20g (drawn tube) per metre 16.00 5/8 dia. Mill finish 20g. (drawn tube) per metre 13.50 7/16 dia. Black or Silver anodised 20g. (drawn tube) per 2 metre lgth 14.00 11 mm dia Black or silver anodised 0.6 mm wall (7075) per 2 metre lgth 16.00 1/2 dia Black or Silver anodised 22g (drawn tube) per 2 metre lgth 14.00 10mmdia Black or Silver anodised 22g (extruded tube) per metre 5.50 5/16 22g black anodised aluminium tube 16 long 2.50 16mm areofoil main boom tube for Im s 16 long 4.50 3/8 Super Light aluminium tube for 1m jib boom 16 long, 3.10 Superlight boom with all the jib boom fittings 11.95 Aluminium Groovy. 14.5mm Round Groovy Silver anodised 2.5 metres 36.50 12.7mm 2.0 metres 24.75 11.1mm 1.8 metres 18.00
11 One Metre Design Toscar Kit of parts to build up to deck level including all mouldings, lead ballast and deck fittings pack. 400.00. Ready built cost 730.00 No Rigs & no Radio included
Boats 12 Bambino 36 class Yacht Overall length 36 plus bumper Weight 8-9 lbs Beam 9 Hulls available in a variety of colours. supplied with layout drawings Hull 80.00 Fin 46.00 Krcar One Metre Designer Peter Wiles Puma Rg65 class yacht 650mm long Plans are available from Marine Modeling, Hulls in various colours 44.00 Hull with raised foredeck fitted 78.00 Fin blank 10.00 Lead Ballast 18.00 More details on separate sheet on request A development of the Oscar One Metre to improve the strong wind boat speed in rough water conditions, while keeping its excellent light air performance. Available in various colours. Boat can be built with its moulded deck or with ply deck if required. Hulls 89.00 Kit of parts to build up to deck level with moulded 2 piece deck, c/f fin, rudder, ballast, fittings and mast/fin box. 368.00
13 Hulls OSCAR One metre Designed by Peter Wiles, Moulded for us locally and supplied with plan. Available to ord er in various colours. 89.00 Kit of Parts to Build up to Deck Level with C/F Fin & Rudder. Ply Deck and Fittings. 315.00 Boat Ready Built (no Radio) 525.00 Composite Marblehead Designed by Peter Wiles Moulded for us locally in glass /carbon cloth available in some colours (details on request) supplied with plan. hull has a beam of 193mm and has a moulded deck. with a raised foredeck designed for swing & shroudless rigs. ballast of 3.4Kg, Draught 620mm Hull 185.00 Kit of Parts to Build up to Deck Level with C/F Fin and Rudder, moulded deck & fittings. 505.00 Boat Ready Built with 3 Standard Swing Rigs (no radio) POA.
Tension Ten Rater Own Design, moulded for us locally. Hull supplied with plan. Available in Glass/ Carbon! 175.00 Overall length 1560mm LWL 1290 Weight 5.5-5.8 kgs Kit of parts to build up hull with C/F Fin & Rudder, moulded deck and fittings. ( no rig /radio) 485.00 Hulls 14 SWEET A class Mk 9 Moulded for us locally. Hull supplied with plan. Available in Glass/ Carbon In various colours. Hull is a modification of the Sweet Smile Designed by R. Stollery and is a competitive boat in all conditions. Cost 222.00 Weight 331bs. Overall length 76, LWL 49, Sail area 1490sq approx kit of Parts to Build up Hull with Fin, Rudder, glass foam Deck and fittings (no rig/radio) 680.00 Fully Built competition boat with 3 suit of sails (no radio ) From 1700.00
15 Mouldings Fins Carbon Fibre fin for 1 metre 67.00 Carbon Fibre fin for M, R10r 760mmlong 93.50 Aluminium fin blank for Rg65, 300mm long 10.00 Moulded Fin Shell for A boat Sweet Design. Glass fibre, filled solid with Fin tube fitted.) 76.00 Rudders Plastic Micro Magic Rudder 8.00 Carbon Fibre rudder suit 1m, Marblehead & Rior 29.00 Moulded Rudder for A boat Sweet design for 3/16 shaft. 40.00 Mouldings Glass Fibre Sheet ideal for decking, (various colours) per sq ft 10.00 Carbon Fibre Sheet ideal for decking, keel boxes etc. Can be cut with scissors per sq. foot 12.00 Carbon fibre cambered foredeck for M s & 10 s 40.00 Moulded glass finbox For 1M s.m s & 10 s 23.00 moulded fin box with attached mast tube for 1m s 25.00 Moulded glass channel for jib track under deck 100mm 4.00 Moulded C/F mast tube for M 13.00 Moulded C/F Tapered mast tube for RA 13.00 Moulded Glass Servo Tray 5.25 Moulded White Plastic Pot Recess (pot not included) 4.50 Carbon fibre moulded rakable mast tubes with plastic top insert for M s & lor s conventional & swing rig, allows mast position to be adjusted by raking. 21.00 Lead Weights Rg65 one piece 485grams,180mm long with slot 18.00 1 metre One piece approx. 2.35kg with slot, length 285mm 27.00 Marblehead, One piece approx. 3.6 kg with slot, length 285mm 30.50 Rior, One piece, weights can be varied to suit, length 305mm 30.50 A Class to suit Sweet Design 12kg approx. 76.00 Bow Bumpers Moulded in silicone rubber in white, grey, or black Moulds kept for Peken, Patriot, Oscar, Berlioz, Ragtime, Puma, Argo Krcar, Composite, Tension, Sweet 6 and 9 6.50 Sweet bumper A class up to mark 5 9.00
Mouldings 16
17 PW 49 4.10 8.20 PW 50 mast raker gives thumb Wheel control of mast rake Only allows of 15mm of movement 7/16 to 15mm dia. Mast. PW 56 Detachable hounds fitting Comprises a slide (& mast Insert) that Fixes to the Mast & a track insert To attach shrouds / jib 7.60 Lead rig ballast plugs To fit inside 7/16 or ½ Tube. 70 gram approx. per 70mm 1.50 A class Fin is supplied With c/f keel tube fitted & Solid core.
Rig Bags, 18 BOTTLE Boat parts Swing rig block 4.00 Pintle fitting 2.50 Crazy Tube (RM) foreyard rig sheeting block 4.00
19 Radio Control Accessories winches New PJ winch 1M details on page 20 95.00 New PJ winch M, 10, 6m, A details on page 20 120.00 Hitec HS 785 drum winch ( use in the Laser class) 26.50 Hitec HS 765 lever arm winch 26.50 PlasticWinch Drum to fit Graupner regatta winch 32mm 6.50 Winch Drums for Graupner winches, 1 diameter and 1 1/2 diameter. 15.00 Set of Gears for Regatta 5173 7.00 Set of Gears for Regatta 5172 17.50 HS 765 HS 785 SERVOS Hitec Hs 325 b/r servo 3.7 kg 13.00 Hitec HS 646/WP (water proof / BLUE) standard servo 9.6 kg 38.00 Hitec HS 5086 (waterproof ) Mini servo. 33.00 BATTERIES Physical Size A.A. Cells 6 cell Battery pack 1800 m.ainp. Nickel Metal Hydride 26.00 5 cell Battery pack 1800 m.amp. Nickel Metal Hydride 22.00 single cell 1800 m.amp 3.75 PLUGS AND SWITCHES Single toggle switch with plug and socket 9.00 Small Toggle Switch with waterproof cover (single pole) 5.25 (double pole) 5.60 Toggle Cover Only 2.90 Futaba Plug 2.50 Futaba socket 2.50 Hitec plug 2.50 Hitec socket 2.50 Molex Plug and Socket for battery to winch. 2.60 Futaba Red Plug 2.00 Heat Shrink 3.2mm shrinks to 1mm 300mm length 0.60 Antenna Tube 1.15 Spektrum Voltage Drop Protector 5.95
PJ Winches 20 PJS 20 Size 41 x 20 x 37 Weight without drum 66 Grams Drum weight 18 Grams Drum size dia. 67mm Circumference 190 mm Max of 2 turns. Voltage 6v - 7.2v max Speed at 6 volts 0.9 sec per turn Speed at 7.2 volts 0.6 sec per turn Torque 20kg at 1 cm Ideal winch for R36 And 1m Simple to set just plug in and Use the transmitter atv s to Adjust the travel, up to 2 turns Economic on batteries.. Cost 95.00 PJS 36 sept/2014 Cost 120.00 Size 41 x 20 x 46 Weight without drum 79 Grams Drum weight 18 Grams Drum size dia 67mm Circumference 190 mm Max of 3 turns. Voltage 6v - 7.2vmax Speed at 6 volts 0.8 sec per turn Speed at 7.2 volts 0.6 sec per turn Torque 36kg at 1 cm
Chargers Multi Lader 7E A 7 output mains Charger With 3 outputs In Delta peak, the others Are 2X 250ma & 2 x 120ma up to 10 cells, Nimh 31.50 Charger leads 4.20 per set 22.00 Ultramat 6 Mains or 12v car battery powered Single delta peak output, charge Rate of up to 1A,up to 8 cells nicd/nimh or up to 3 lipo s cells, with various leads 37.00.
Deck Fittings Eyebolts all chromed brass one piece PW 1 Eyebolt 1/2 6ba 0.90 PW l B Eyebolt 1 6ba 0.90 PW 1C Eyebolt 1 4ba 0.90 PW 1D Eyebolt 20mm 2.5mm 0.90 PW l E Eyebolt 1 4ba aluminium black anodised, 1/2 weight of chromed partner. 1.25 PW 1F Eyebolt 1/4 4ba and nut for jib slide 0.90 PW 1G Eyebolt 2 2ba 1.50 PW 1H Eyebolt 1 3mm (available Feb 15) 0.90 PW 2 Deck Plate chromed brass 1.95 PW 3 Keel Bolt 3mm brass insert with 2.65 tufnol block and s/s bolt. PW 3b Ballast Bolt, brass sleeve nut for securing a detachable lead to a fin. 2.20 PW 4 Jib Rack Chromed Brass. 2.95 PW 5 Jib Slide 3 black anodised. Includes Insert PW 5e supplied with ThumbWheel 5.00 PW 5b Jib Slide 5 black anodised. Includes Insert PW 5e supplied with ThumbWheel. 5.00 PW 5c Jib/Mast Slide 16 black anodised, Order Inserts separately. 4.40 PW 5d Insert to accept Mast Mounting plug in slide (plug is part PW24c) 2.20 PW 5e Insert for Jib/Mast Slide, eye glues 3.25 across or in line. Supplied with thumbwheel PW 5f As Above, Supplied with Screw & 2.65 Washer to prevent line from snagging wheel PW 6 Mast Ram fits Jib/Mast Slide 4ba 2.40 Pw 6b Mast ram curved head to fit 3.15 mast, with large thumbwheel 4ba PW 6c As 6b with plug for bulkhead 3.65 PW 9 Mast Jack 5/8, 1/2 Black alum. 3.45 PW11 Rudder Arm 1/8 single 4.00 Chromed Brass. Made from one piece of metal. PW11b Rudder Arm 5/32 single 4.00 PW l1c Rudder Arm 3/16 single 4.00 PW l1d Rudder Arm 1/8 double 4.20 PW 11e Rudder Arm 5/32 double 4.20 PW 11f Rudder Arm 3/16 double 4.20 PW12 Single arm black plastic with metal insert 2mm, 3mm and 4mm 1.80 PW 12b Detachable rudder fitting/arm, 15.75 this is attached loosely to the rudder tube and allows the rudder to be removed for transport, no access to hull is necessary. Special Shaft is supplied for 5/32 or 3/16 3.75 pw1e pw4 pw11 b pw5f pw5d pw1b pw5e pw1 pw3 pw3 b pw5 b pw 9 pw12 b pw1c pw2 Pw6c pw1f pw5 pw12 pw6 pw11e
23 Deck Fittings pw 12c PW 12c Rudder shaft 6 s/s rod 1/8 0..81 Rudder shaft 6 s/s rod 5/32 0. 85 Rudder shaft 6 s/s rod 3/16 1. 05 PW 12d Rudder tube 4 brass 1/8 0.76 Rudder tube 4 brass 5/32 0.77 Rudder tube 4 brass 3/16 0.78 PW 12e 6 of 4mm Carbon Fibre rudder shaft and 3 of 8mm Carbon Fibre tube with PTFE bearings. 6.20 PW 12f 6 of 6mm Carbon Fibre ruddershaft and 3.5 of 8mm Carbon Fibre tube 3.25 PW 12g 6 of 6mm Carbon Fibre rudder shaft and 3.5 of 10mm CarbonFibre tube with PTFE bearings 6.95 PW 19 Sheeting Tube in plate 3.30 PW 19b Sheeting Reverser in plate 3.30 PW 20 Sheeting Tube (must be glued in deck) 0.85 PW 25 Mast Step alum. slotted 2.75 PW 25b Mast Step alum. 5mm holes 2.75 PW 26 Mast slot Plate alum. (to suit 7/16,l/2, 5/8. 2.85 PW 39 Radio Pot (67mm dia x 80mm) 1.20 PW 39c Radio Pot (67mm dia x 50mm) 1.00 PW 44B Concealed ball raced Jib Swivel fitting includes 3 slide and fits 3/8, 10mm 7/16 and 1/2 booms. For use on 6m s and A where jib boom height is important. Alloy joining tube (which is now angled ) for boom with ball races fitted inside it attaches to a track insert included. 16.30 PW 45 6 Swing Rig Tube 3/4 odx20sw unanodised aluminium. 1.95 PW 45b 6 Oval Tube (for 1 metres) 1/2 by 3/4 mt. unanodised 2.40 PW 45c 10 Oval Tube (J lcass) 4.00 PW 48 Sheeting Nipples to fit 8mm, 5/16, 3/8, 10mm, 7/16 tubes. O/D 1.10 PW48 Sheeting nipple Micromagic 1.10 pw19 b pw12 f see mouldings for pot recess page 13 pw 48 pw20 pw12 e pw19 pw25b pw26 pw 25 pw 12 d pw12 g pw 39 pw 44B pw45 pw46 pw 45b
Deck Fittings PW 49 Main Sheet Post ( telescopic) Adjustable height Aluminium Tubes 4.10 PW 49b As PW49 supplied with Glass Outer tube (glass outer tube only 3.00) 6.00 PW 50 Mast Rake Control (thumb wheel adjustment) for 7/16, 1/2, 14mm masts 8.20 PW 53 Radial Jib Fitting For use on A, 6m s and lor s. Supplied with ball races can be mounted on twin slides or just using a three point fixing. With adjustable luff angle, luff attaches to shaft. To fit 10mm or rectangular c/f boom. (Deck must be very rigid) 72.50 PW 53b Attachment for Counter Balance to radial jib fitting. 4.20 PW 53c Mobile Slides to take Radial Jib fitting. Supplied with 2 Deck Rails and mounts for compression strut 25.20 PW 60 Ball Joint 3mm each 1.75 PW 60b 0.3m Push rod tube with 2 ball joints 6.00 PW 61 Silicone Bungs small end 3mm dia 0.35 PW 62 Turned Acetal Fairlead Ring 1.50 PW 78 s/s Tension Spring (hand wound) 2.00 PW 79 Through deck Fairlead 3.65 PW 80 Through deck Fairlead to take Pulley below deck 13.65 PW 81 Through deck fairlead, to take below deck, pulley not included 7.35 PW 200 Shackles 5mm stainless steel 1.10 pw53 pw53c PW 50 pw60 pw 53b PW79 pw200 PW80 PW78 PW81 PW 49 pw 62 pw61
25 Deck Fittings PW 202 Ball Raced Through Deck Pulley Block Water Resistant. 9.00 PW 203 Ball Raced Single Pulley Block For deck mounting 6.50 PW 204 Ball Raced Single Pulley Block With shackle 6.50 PW 205 Ball Raced Servo Arm Pulley 6.50 PW 207 Ball raced short pulley block With shackle 6.50 PW 223 ball raced double block For deck mounting. 9.50 PW 224 Ball raced double block With shackle 9.50 PW 227 Ball raced short double block With shackle 9.50 pw203 PW 202 pw 204 PW224 PW207 PW223 PW205 PW 8j Detachable turnbuckle (complete ) With s/steel 3mm deck bolt Turnbuckle has 20mm adjustment And is held in place with sleave 6.50 PW 8f Body only (complete) 4.50 PW 8f Deck eye only ( 15mm of thread ) 2.00
Rig Fittings 26 PW 8c Turn Buckle 2.5mm, 6ba or 4ba chromed brass wire type. (6ba suits 1m or M, 4ba for 10r and RA class), (3mm available Feb) 3.05 pw8c PW 8d Turn Buckle 4ba alloy black anod. wire type less than 1/2 weight of chromed partner 3.85 pw8d PW 8e Turn Buckle 2ba 2 long chromed 3.90 For large boats of 16kg or more. PW 9 Mast Jack 5/8 or 1/2 Black alum. 3.50 PW8e pw10b PW 10 3 Hole Bowsies Black and Yellow 0.09 PW lob White round Bowsie, drill your own holes, size 15mm x 5mm 0.05 PW 13b Backstay Arm (bent) black anod aluminium available in different lengths 2.30 PW 13c Bent Backstay Arm with plastic plug / to fit 10mm, 7/16 or 1/2 tube. Allows Backstay to be rotated or removed to allow rig to lie flat to fit in sail bag or to allow sails with luff rings or luff pocket to be slid over top of mast. Black anodised aluminium. arm kept in 4 lenghts Wt.1/3 oz. 4.15 Light Weight Version, for top rigs only wt approx 1/4 oz. 4.15 PW 13d Bent Backstay Arm with plastic mast plug & injection moulded headboard rotating headboard support s/s ballraces for use with rings and luff pocket sails. Improves off wind sail shape. Black anodised aluminium specify mast size & backstay length 16.30 PTFE Version 8.00 PW 13f Bent Bckstay arm with plastic plug & Insert for rotating wire headboard. 4.50 pw13d pw13c pw9 pw10 pw13d pw13f
Rig Fittings PW 14c Spreader s/s tube small dia. 1m and M 3.30 PW14c Spreader s/s tube large dia. 3.30 PW 14d Clip on Spreader (black plastic) For 10.8mm, 7/16, 1/2, 12mm and 14mm tube 5.30 PW 14c PW14d pw14c pw 15 pw15e 1m Special kicker bolt for use with sunken aft deck
Rig Fittings 28 PW15f Ball Raced Gooseneck and Tension Strut for A, 12m and AC12. Rotates around centre,line of mast, designed for use with luff rings or pocket sails. Improves the off-wind sail shape. Supplied with Stainless Steel Ball Races to fit 17mm dia. through deck tube. all black anodised aluminium 80.00 PW 15g Gooseneck and Compression strut Including the PW 21c 21.00 PW16 Flow Adjuster 5/16, 3/8, 7/16 1/2 and 5/8. Made from 18g. s/s wire. 0.78 PW 16b Flow Spring 5/16, 3/8, 7/16 1/2 and 5/8. Made from 18g. s/s wire. 0.78 PW 16C stainless steel clew attachments for Areofoil booms. 1.15 PW16D machined aluminium clew attachment Clamps tube sizes 3/8, 10mm, 7/16,12mm, & 14mm. Check Availability 4.00 PW16E clew slide for c/f rectangular tube Needs a slot in tube 4.10 P W17 Boom Bands with eye to fit 5/16, 3/8, 7/16, 10mm, 12mm, 1/2 and 5/8 tube. Chromed brass 1.80 PW 17 Plastic Boom Bands 3/8, 10mm, 7/16 0.60 PW17bMast rings chromed brass various sizes 0.95 PW17c Boom bands with double eyes to fit 10mm and 3/8 1/2 tube 2.50 PW17 d Mast rings Black anodised machined Aluminium with one attachment points 3.15 Two attachments points 3.15 Available in sizes for 10,12 mm tubes PW 17E s/s boom band for areofoil boom 1.15 PW18 Y Shaped Spreader 4.10 PW18b Y Spreader Kit as above includes Turnbuckle, n/c shroud wire and crimps 7.60 PW16C pw17b pw16 pw15f PW17E PW16B PW17D pw 17 PW16D PW16E pw18
29 Rig Fittings PW21 Compression Strut short black anodised aluminium 4 9.1570 PW21b Compression Strut long, black anodised aluminium 6 or 9 inches 10.45 PW21c Plate with curved base to fit booms. Chromed brass 2.60 PW21d Boom Band with plate 10mm, 12mm and 14mm 3.50 PW22 Alloy Mast Joiner/Adaptor 5/8 to 1/2 mill finish 1.80 PW22b Alloy Mast Joiner/Adaptor 5/8 to 5/8, 1/2 to 1/2, 7/16 to 7/16 mill finish 2.95 4 of 7/16 20g. black anod. Tube to fit inside l/2 22g. 0.68 PW22d Alloy Mast Adapter l/2 to 3/8 mill finish 1.80 PW23 Counter Balance Weight chromed brass 16, 22 and 34 gram.. l6g. Wire supplied. Boom end must be ordered separately. (pw71b 8mm, 5/16, 3/8, 10mm,7/16 ) 2.10 PW24 Mast Plug for 10mm, 7/16, 1/2 1.85 PW24b Mast Plug for groovy state w hat size. 2.30 PW24c Mast plug for track system pw5, state size 2.30 PW31 Grommetts to fit 6mm, 5/16, 3/8, 10mm, 7/16 and 1/2 (pack of 10) 0.63 PW31b O Rings, (sizes as PW 31) each 0.13 PW32 Burgies (kit of parts) 4.60 PW33b Ball raced swivel tiny, about 1/8 dia. and 3/8 long 0.85 PW34 Crimps, Pack of 10 Several sizes, (ask to suit wire size) 0.34 P W35 Swing Rig Block, black anodised to fit 14mm mast and takes 10mm, 12mm, 7/6, l/2 alum. booms 6.95 PW35b Swing Rig Block, black anodised to fit 1/2 mast and takes 3/8 alum. booms 6.95 PW 33b. pw 23 pw 24b pw31 pw34 pw21/b pw21c pw 22 pw 24 pw 31b pw35 pw35b
PW 36 swing rig bearings PTFE please state what size mast 5.15 PW36b Swing rig bearings with ball raced bottom cup 14.60 Rig Fittings pw36b 30 PW56 Detachable hounds fitting 7.60 PW56bChrome insert with wire ring for Detachable hounds 2.30 PW 62 PTFE Fairlead ring 1.50 pw36 pw62 PW63 Eyelets small for luff rings Packs of 50 1.5mm I/d 1.40 2mm s/s washers fit these, order separately. PW63b Eyelets large for corners Packs of 20 with washers 3.8mm I/d 1.00 Pw65 Luff rings s/s, state what size mast Required for. 0.32 PW68 Jib gadget for swing rigs, twin Ball raced arm pivot, specify boom size 20.00 PW71b Boom End in Black Acetal with jib luff fixing point 8mm, 5/16, 3/8, 10mm, 3/8 Superlight, 7/16 and 1/2 0/d tubes 2.75 Plastic Oval Boom End to suit our tube 2.75 PW72 Snap links black size 4 x 24mm in length, pack 10, or size 2x 16mm length 0.70 PW73 Thumbwheel for Sails etc rectangular boom fitting 2.5mm thread 1.05 PW 73b Thumbwheel 6ba thread 1.05 PW74 90 degree hooks s/s pack of 5 2.00 PW 75 Parrot Perch (Jib luff support) 1.80 PW 76 Angled black alum. Joiner to fit 8mm or 10mm tube. 3.50 PW 77 Hook Strap s/s PW 77 0.70 pw71b pw63 pw75 PW76 pw65 pw63b pw68 pw71b pw74 pw72 pw73
31 Cord and Wire 2015 SHEETING CORD MINIMUM OF 5 METRE LENGTHS Dyneema Sheeting cord 140lbs / metre 0.32. per 180 yd reel 30.00 Dyneema Sheeting cord 100lbs / metre 0.27. per 180 yd reel 28.00 Dynemma 70lbs / metre 0.24. per 180 yd reel 22.00 Dyneema 50lbs / metre 0.24. per 180 yd reel 22.00 Dyneema 30lbs / metre 0.22. per 180 yd reel 20.00 Greenspot Sheeting Cord Dacron 130lb / metre 0.24 80lb / metre 0.22 50lb / metre 0.20 30lb / metre 0.18 Black Dacron 30lb / metre 0.18 Black Dacron 50lb / metre 0.20 S/S stranded rigging wire nylon covered 150lb per metre 0.44 S/S 100lb per metre 0.44 S/S 80lb. per metre 0.44 S/S 50lb per metre 0.37 S/S 80lb / 100lb / 150lb 7.5m reel 3.25 S/S 20lb / 30lb / 50lb 7.5m reel 2.50 S/S mono core wire 16 g. per m 1.10 S/S 20g per m 0.89 S/S 18 g. per m 1.00 S/S 22g per m 0.79 S/S 26 g. per m 0.58 S/S 24g per m 0.68. Boat Building Materials Carbon Cloth 204 gram per sq. mtr 39 wide per metre run 30.00 Woven Glass cloth plain weave 324 gram 36 wide per metre run 6.80 Woven Glass cloth plain weave 200 gram 36 wide per metre run 5.80 Woven Glass cloth plain weave 80 gram 36 wide per metre run 4.80 Carbon / Glass Hybid 150 gram 36 wide 13.00 per metre run Wood 1.5mm 2mm/ 3mm Ply in sheets 4ft x 1ft, is stocked. Per sheet 8.00.
32 2mm x 8 s/s counterrsunk 0.08 2mm x 8 s/s panhead 0.08 2mm x 12 s/s panhead 0.09 2mm x 19 s/s countersunk 0.10 2mm x 20 s/s cheesehead 0.10 2mm s/s nuts 0.08 2.5mm s/s nuts 0.08 3mm x 6 s/s panhead pozzi 0.10 3mm x 6 s/s socket screw 0.19 3mm x 15 s/s panhead 0.19 3mm x 20 s/s panhead 0.19 3mm x 30 s/s panhead slotted 0.23 3mm x 40 s/s panhead slotted 0.25 3mm s/s nuts 0.08 3mm Nylocks 0.10 4mm s/s nuts 0.09 5mm s/s nuts 0.10 4mm x 60 s/s panhead 0.26 6mm s/s Bolt with Washer 0.53 WASHERS s/s 2mm, 2.5mm, 3mm, 4mm and 5mm 0.03 Pop Rivets c/s 2.3mm x 8mm 0.05 Split Pin s/s 1.6mm x 3 0 mm 0.05. s/s 2.2mm x33mm 0.05 Nuts & Bolts 2015 Self Tappers 2 g x 1/4 s/s pan head 0.10 2 g x 3/8 s/s pan head 0.10 2g x 1/2 s/s pan head 0.11 2g x 1/4 s/s countersunk 0.10 2 g x 3/8 s/s countersunk 0.10 2 g x 1/2 s/s countersunk 0.11 4 g x l/4 s/s pan head 0.10 4 g x 3/8 s/s pan head 0.10 4 g x 1/2 s/s pan head 0.11 4 g x 3/4 s/s pan head 0.12 4 g x 1 s/s pan head 0.13 Bolts, Nuts & Washers 6ba x 1/4 s/s cheesehead 0.22 6ba x 1/2 s/s cheesehead 0.17 6ba s/s nuts 0.10 4ba x 3/8 s/s cheesehead 0.15 4ba x 1/2 s/s 0.17 4ba x 3/4 s/s cheesehead 0.19 4ba x s/s nuts 0.13 Prices subject to change depending upon avalability in the fastening industry. many items above are non preferred
Accessories 2015 33 Transmitter Cover. cotton lined vinyl with see-through patch on front 10.00 Transmitter cover (trans-mitt) nylon cover with fleece lining, clear panel on front & zip along bottom. Red, Royal Blue or Navy Blue Large eyelet available for 2.4 gig aerial. Also eyelet can be fitted in window for Neck strap. 36.00 Strop 3.00 Neck Straps 6.00 Neck Strap Balancer 6.00 Crimping Pliers 6.00 Lipo Safety Bags For Storage and charging of lipo Batteries, Small 5.50 Large 6.50 Paint brushes (cheap). Ideal for resining use once & throw away, l/2, 3/4, l 30p. Books Bookazine. Radio Controlled Racing Sail Boats By Chris Jackson 5.99