echanical and electronic length measuring instruments for internal and external measurements
Precision and continuity Features Contents ver since its foundation in 1883 Kroeplin have been involved in development and production of handy reliable and precise gauges for the measurement of lengths and thicknesses, especially for the metalworking industry. Thus the quick test system was created, which was the basis for all further innovations and also for the electronic dial indicators. xperience is the solid foundation for quality. Careful observation and analysis of the market, flexible realization of requirements, convincing measuring concepts - that is the philosophy that makes Kroeplin successful. Today like before, for more than 125 years. Certificate of quality Reliable repeatability Scales are well arranged and easy to read Scale interval from 0,005mm up Tolerance marks easy to read All mechanical gauges are also available in INCH The electronic gauges can be switched over to INCH easuring contacts are mainly made of carbide lectronic gauges with analog / digital display for better reading itutoyo interface USB interface rgonomically designed easuring programs and contacts for different applications Absolute and relative measurement Red / Green LD for tolerance measurement Special solutions possible Stand holding unit for serial measurement of small parts Internal measurement Application range up to 60mm Application range up to 120mm Application range exceeding 120mm Internal comparison measurement Internal measurement with 3-point contact Internal measurement for blind holes xternal measurement Application range up to 30mm Application range up to 200mm Tube wall measurement Application range up to 100mm easurement of foamed material and foils Application range up to 100mm 4-5 6-7 8-9 10-11 12 13 14-15 16-17 18-19 20-21 Convincing price for convincing performance Accessories / Interfaces 22 Special gauges / Definitions 23 Detailed information and data sheets for all gauges are available on our webpage www.kroeplin.com Subject to technical alterations
NW! Instruments with 3-point contact for easier centering NW! rgonomically designed with new IP classification The gauges provide a digital / analog display for better reading. The quicktest gauges includes custom designed test programs, measuring contacts, absolute- and relative measuring programs and red/green display for tolerance measurement. The established and proven generation of Quicktests mechanical easuring contacts n easy handling n high repeatability n measuring programs and contacts for different applications n suitable for workshop use n IP 67 n Interface (Digimatic, USB, U-WAV ) n mm/inch switch n fast reading n accurate measurement n precise measuring results n IP 65 n optimized measuring force n accurate measurement n ergonomically designed electronic n IP 67 n optimized measuring force n digital display with analog bar n ergonomically designed n Interfaces (USB, DIGIATIC or U-WAV) available on request 3
Internal easurement Application range up to 60 mm 4 G102 H105 G210 H210 G330
easuring span es easuring range eb Range of indication Azb Scale interval Skw Permissible errors G Repeatability limit r easuring force min. easuring force max. Weight Protection class easuring contact movable Hb easuring contact fixed Hf Type of measuring contact Groove depth A max. Groove width B min. easuring depth easuring depth L max. L max. Picture lectronic echanical Wooden box Type [N] [N] [g] G102 10 2,5-12,5-12,8 0,005 0,015 0,005 225 0,9 0,9 Chisel R H102 10 2,5-12,5-12,8 0,005 0,015 0,005 155 0,9 0,9 Chisel R G105 10 5-15 4,7-15,3 0,005 0,015 0,005 230 2,5 2,5 Ball Ø0,6 H105 10 5-15 4,7-15,3 0,005 0,015 0,005 160 2,5 2,5 Ball Ø0,6 G210 20 10-30 9,5-30,5 0,01 0,03 0,01 1,1 250 5,3 5,3 Ball Ø1 H210 20 10-30 9,5-30,5 0,01 0,03 0,01 1,1 180 5,3 5,3 Ball Ø1 G220 20 20-40 19,5-40,5 0,01 0,03 0,01 1,1 250 7,3 7,3 Ball Ø1 H220 20 20-40 19,5-40,5 0,01 0,03 0,01 1,1 180 7,3 7,3 Ball Ø1 G230 20 30-50 29,5-50,5 0,01 0,03 0,01 1,1 255 7,3 7,3 Ball Ø1 H230 20 30-50 29,5-50,5 0,01 0,03 0,01 1,1 1 7,3 7,3 Ball Ø1 G240 20 40-60 39,5-60,5 0,01 0,03 0,01 1,1 265 8,5 8,5 Ball Ø1 H240 20 40-60 39,5-60,5 0,01 0,03 0,01 1,1 195 8,5 8,5 Ball Ø1 G313 30 13-43 12,5-43,5 0,02 0,04 0,02 1,7 360 5,7 5,7 Ball Ø1,3 G330 30 30-60 29,5-60,5 0,02 0,04 0,02 1,7 370 6,5 6,5 Ball Ø1,5 0,7 0,7 2,3 2,3 5,2 5,2 7,0 7,0 7,0 7,0 5,7 6,2 0,5 0,5 1,8 12 12 127 132 [1] [1] [2] [2] [2] [2] [4] [4] [4] [4] [2] easuring contacts easuring capacity 5 [1] [2] [4] Chisel R mm Ball Ø 0,6 mm Ball Ø 1,0 mm Ball Ø 1,3 mm Ball Ø 1,0 mm Ball Ø 1,0 mm Ball Ø 1,5 mm Ball Ø 2,0 mm eb easuring range A Groove depth B Groove width Hb easuring contact movable Hf easuring contact fixed L easuring depth
Internal easurement Application range up to 120 mm 6 G240 H240 G415 H415 G370 H470
easuring span es easuring range eb Range of indication Azb Scale interval Skw Permissible errors G Repeatability limit r easuring force min. easuring force max. Weight Protection class easuring contact movable Hb easuring contact fixed Hf Type of measuring contact Groove depth A max. Groove width B min. easuring depth L max. Picture lectronic echanical Wooden box Type [N] [N] [g] G250 20 50-70 49,5-70,5 0,01 0,03 0,01 1,1 265 8,5 8,5 Ball Ø1 H250 20 50-70 49,5-70,5 0,01 0,03 0,01 1,1 195 8,5 8,5 Ball Ø1 G260 20 60-80 59,5-80,5 0,01 0,03 0,01 1,1 270 8,5 8,5 Ball Ø1 H260 20 60-80 59,5-80,5 0,01 0,03 0,01 1,1 200 8,5 8,5 Ball Ø1 G270 20 70-90 69,5-90,5 0,01 0,03 0,01 1,1 270 8,5 8,5 Ball Ø1 H270 20 70-90 69,5-90,5 0,01 0,03 0,01 1,1 200 8,5 8,5 Ball Ø1 G280 20 80-100 79,5-100,5 0,01 0,03 0,01 1,1 270 8,5 8,5 Ball Ø1 H280 20 80-100 79,5-100,5 0,01 0,03 0,01 1,1 200 8,5 8,5 Ball Ø1 G0 30 50-80 49,5-80,5 0,02 0,04 0,02 1,7 370 8,5 8,5 Ball Ø2 G370 30 70-100 69,5-100,5 0,02 0,04 0,02 1,7 375 8,5 8,5 Ball Ø2 G390 30 90-120 89,5-120,5 0,02 0,04 0,02 1,7 380 8,5 8,5 Ball Ø2 G415 50 15-65 14,5-65,5 0,02 0,06 0,04 1,0 1,8 415 6,0 6,0 Ball Ø1,5 H415 50 15-65 14,5-65,5 0,025 0,9 1,9 5 6,0 6,0 Ball Ø1,5 G440 50 40-90 39,5-90,5 0,02 0,06 0,04 1,0 1,8 420 8,5 8,5 Ball Ø2 H440 50 40-90 39,5-90,5 0,025 0,9 1,9 370 8,5 8,5 Ball Ø2 G470 50 70-120 69,5-120,5 0,02 0,06 0,04 1,0 1,8 420 8,5 8,5 Ball Ø2 H470 50 70-120 69,5-120,5 0,025 0,9 1,9 370 8,5 8,5 Ball Ø2 5,5 5,5 1,9 1,9 132 132 132 188 188 192 192 192 192 [3] [3] easuring contacts easuring capacity 7 [3] Ball Ø 1,0 mm Ball Ø 1,5 mm Ball Ø 1,0 mm Ball Ø 2,0 mm eb easuring range A Groove depth B Groove width Hb easuring contact movable Hf easuring contact fixed L easuring depth
Internal easurement Application range up to 120 mm 8 G4100 H4100 G0 H870 ID80200
easuring span es easuring range eb Range of indication Azb Scale interval Skw Permissible errors G Repeatability limit r easuring force min. easuring force max. Weight Protection class easuring contact movable Hb easuring contact fixed Hf Type of measuring contact Groove depth A max. Groove width B min. easuring depth L max. Picture lectronic echanical Wooden box Type [N] [N] [g] G4100 H4100 G4130 H4130 G4150 H4150 G0 H0 G870 H870 ID6080 ID60150 ID60220 ID80200 50 50 50 50 50 50 100 100 100 100 100 100 100 200 100-150 100-150 130-180 130-180 150-200 150-200 50-150 50-150 70-170 70-170 80-180 150-250 220-320 200-400 99,5-150,5 99,5-150,5 129,5-180,5 129,5-180,5 149,5-200,5 149,5-200,5 49,5-150,5 49,5-150,5 69,5-170,5 69,5-170,5 79,5-180,5 149,5-250,5 219,5-320,5 199,5-400,5 0,02 0,02 0,02 0,2 0,06 0,06 0,06 5 5 5 5 0,25 0,3 0,3 0,4 0,04 0,025 0,04 0,025 0,04 0,025 0,2 1,0 0,9 1,0 0,9 1,0 0,9 1,5 1,5 1,5 1,0 1,8 1,9 1,8 1,9 1,8 1,9 2,0 2,0 2,0 2,0 2,5 2,5 2,5 2,0 425 3 430 390 4 395 650 590 650 590 1600 1600 1700 2200 - - - - 8,5 8,5 8,5 8,5 8,5 8,5 4,0 4,0 14,0 14,0 12,0 32,0 32,0 29,0 8,5 8,5 8,5 8,5 8,5 8,5 4,0 4,0 14,0 14,0 12,0 32,0 32,0 29,0 Ball Ø2 Ball Ø2 Ball Ø2 Ball Ø2 Ball Ø2 Ball Ø2 Hemisphere SR 20 3,0 3,0 13,0 13,0 11,0 31,0 31,0 28,0 5,5 5,5 5,5 5,5 5,5 5,5 5,5 21,0 192 192 192 192 192 192 395 395 395 395 5 5 5 7 [18] [18] [19] [19] [19] [19] [19] [20] easuring contacts easuring capacity 9 [18] [19] [20] Ball Ø 2,0 mm Ball Ø 5,0 mm Ball Ø 5,0 mm Hemisphere SR 20 mm eb easuring range A Groove depth B Groove width Hb easuring contact movable Hf easuring contact fixed L easuring depth
Internal Comparison easurement Application range from 50 mm to 430 mm 10 H4180 H250 H290
easuring span es easuring range eb Range of indication Azb Scale interval Skw Permissible errors G Repeatability limit r easuring force min. easuring force max. Weight Protection class easuring contact movable Hb easuring contact fixed Hf Type of measuring contact Groove depth A max. Groove width B min. easuring depth L max. Picture lectronic echanical Wooden box Type [N] [N] [g] H250 20 50-100 49,5-100,5 0,01 0,03 0,015 1,1 220 12,0 variable Ball Ø1 H290 20 90-140 89,5-140,5 0,01 0,03 0,015 1,1 230 12,0 variable Ball Ø1 H2130 20 130-180 129,5-180,5 0,01 0,03 0,015 1,1 240 12,0 variable Ball Ø1 H4180 50 180-310 179,5-310,5 0 0,9 1,9 420 21,0 variable Ball Ø2 H4300 50 300-430 299,5-430,5 5 0,9 1,9 450 21,0 variable Ball Ø2 2,2 2,2 170 170 easuring contacts easuring capacity 11 Ball Ø 1,0 mm Ball Ø 2,0 mm eb easuring range A Groove depth B Groove width Hb easuring contact movable Hf easuring contact fixed L easuring depth
Internal measurement with 3-point contact Application range from 7 mm to 105 mm G210P3 easuring span es easuring range eb Range of indication Azb Numerical interval Zw Permissible errors G Repeatability limit r easuring force min. easuring force max. Weight Protection class easuring contact movable Hb easuring contact movable Hf Type of measuring contact Groove depth A max. Groove width B min. easuring depth L max. Picture echanical lectronic Wooden box Type [N] [N] [g] G107P3 7 7-14 6,8-14,5 0,002 0,01 0,004 1,0 1,4 230 2,5 - Ball Ø0,6 2,2 G210P3 10 10-20 9,8-20,5 0,005 0,02 0,01 1,1 250 4,6 - Ball Ø1 3,5 G215P3 15 15-30 14,5-30,5 0,005 0,02 0,01 1,1 275 5,8 - Ball Ø1 5,0 G225P3 20 25-45 24,5-45,5 0,005 0,02 0,01 1,1 255 7,3 - Ball Ø1 7,0 G240P3 20 40-60 39,5-60,5 0,005 0,02 0,01 1,1 270 12,2 - Ball Ø1 8,0 G255P3 20 55-75 54,5-75,5 0,005 0,02 0,01 1,1 270 12,2 - Ball Ø1 8,0 G270P3 20 70-90 69,5-91 0,005 0,02 0,01 1,1 275 12,2 - Ball Ø1 8,5 G2P3 20-105 84,5-106 0,005 0,02 0,01 1,1 2 12,2 - Ball Ø1 9,0 34 75 77 84 84 84 84 84 [1] [2] [2] [3] [3] [3] [3] [3] easuring contacts [1] [2] [3] easuring capacity 12 Ball Ø 0,6 mm Ball Ø 1,0 mm Ball Ø 1,0 mm eb easuring range A Groove depth B Groove width Hb easuring contact movable Hf easuring contact fixed L easuring depth
Internal measurement for blind holes Application range from 20 mm to 70 mm H2G40 easuring span es easuring range eb Range of indication Azb Numerical interval Zw Permissible errors G Repeatability limit r easuring force min. easuring force max. Weight Protection class Type of measuring contact easuring contact movable Hb easuring contact movable Hf max. easuring contact thickness easuring depth L max. Picture echanical lectronic Wooden box Type [N] [N] [g] G2G20 20 20-40 19,5-40,5 0,01 0,03 0,01 1,1 250 Conus SR = 0,2 5,0 5,0 Ø H2G20 20 20-40 19,5-40,5 0,01 0,03 0,01 1,1 180 Conus SR = 0,2 5,0 5,0 Ø G2G30 20 30-50 29,5-50,5 0,01 0,03 0,01 1,1 255 Conus SR = 0,2 5,0 5,0 Ø H2G30 20 30-50 29,5-50,5 0,01 0,03 0,01 1,1 1 Conus SR = 0,2 5,0 5,0 Ø G2G40 20 40-60 39,5-60,5 0,01 0,03 0,01 1,1 265 Conus SR = 0,2 5,0 5,0 Ø H2G40 20 40-60 39,5-60,5 0,01 0,03 0,01 1,1 195 Conus SR = 0,2 5,0 5,0 Ø G2G50 20 50-70 49,5-70,5 0,01 0,03 0,01 1,1 265 Conus SR = 0,2 5,0 5,0 Ø H2G50 20 50-70 49,5-70,5 0,01 0,03 0,01 1,1 195 Conus SR = 0,2 5,0 5,0 Ø easuring contacts Further measuring ranges available on request easuring capacity [13] [13] [13] [13] [13] [13] [13] [13] Accessories 13 [13] Conus SR 0,2 mm Hb easuring contact movable Hf easuring contact fixed L easuring depth
xternal measurement Application range up to 30 mm 14 POCO2K C110 D110 C220 D220 C330
easuring span es easuring range eb Range of indication Azb Scale interval Skw Permissible errors G Repeatability limit r easuring force min. easuring force max. Weight Protection class easuring contact movable Hb easuring contact fixed Hf Type of measuring contact easuring depth L max. Picture lectronic lectronic echanical echanical Wooden box Type [N] [N] [g] POCO 2K 10 0-10 0 - >10 0,3 1,3 40-5 5 POCO 2N 10 0-10 0 - >10 0,3 1,3 40-3,5 3,5 Needle Ø 0,75 POCO 2F 10 0-10 0 - >10 0,3 1,3 40-4,5 4,5 Sn-R 0,5 / F Ø3,5 C110 10 0-10 0-10,5 0,005 0,015 0,005 240 19,1 18,6 Ball Ø1,5 D110 10 0-10 0-10,5 0,005 0,015 0,005 170 19,1 18,6 Ball Ø1,5 C110S 10 0-10 0-10,5 0,005 0,015 0,005 240 18,8 18,5 Chisel R 0,4 D110S 10 0-10 0-10,5 0,005 0,015 0,005 170 18,8 18,5 Chisel R 0,4 C220 20 0-20 0-20,5 0,01 0,03 0,01 1,1 280 24,7 24,6 Ball Ø1,5 D220 20 0-20 0-20,5 0,01 0,03 0,01 1,1 210 24,7 24,6 Ball Ø1,5 C220S 20 0-20 0-20,5 0,01 0,03 0,01 1,1 280 24,7 24,6 Chisel R 0,4 D220S 20 0-20 0-20,5 0,01 0,03 0,01 1,1 210 24,7 24,6 Chisel R 0,4 C330 30 0-30 0-30,5 0,02 0,04 0,02 0,9 430 30 30 Ball Ø3 C330S 30 0-30 0-30,5 0,02 0,04 0,02 0,9 430 30 30 Chisel R 0,75 36 36 36 116 116 [23] [24] [25] [7] [7] [7] [7] [7] 1732-01 1732-01 1732-01 easuring contacts easuring capacity 15 [7] [23] [24] [25] Ball Ø 1,5 mm Ball Ø 3,0 mm Chisel R 0,4 mm Chisel R 0,75 mm Ball Ø 5,0 mm Needle Ø 0,75 mm Chisel R 0,5 mm Plane Ø 3,5 mm Hb easuring contact movable Hf easuring contact fixed L easuring depth
xternal easurement Application range up to 200 mm 16 D450 C450 D450F C8100 OD60100BJ
easuring span es easuring range eb Range of indication Azb Scale interval Skw Permissible errors G Repeatability limit r easuring force min. easuring force max. Weight Protection class easuring contact movable Hb easuring contact fixed Hf Type of measuring contact easuring depth L max. Picture lectronic lectronic echanical echanical Wooden box Type [N] [N] [g] C450 50 0-50 0-50,5 0,02 0,06 0,04 1,7 490 30 30 Ball Ø3 D450 50 0-50 0-50,5 0,025 1,7 430 30 30 Ball Ø3 C450S 50 0-50 0-50,5 0,02 0,06 0,04 1,7 490 30 30 Ball Ø3 D450S 50 0-50 0-50,5 0,025 1,7 430 30 30 Ball Ø3 C450B 50 0-50 0-50,5 0,02 0,08 0,06 1,7 510 72,6 30 D450B 50 0-50 0-50,5 0,075 1,7 450 72,6 30 C450F 50 0-50 0-50,5 0,02 0,08 0,06 1,7 510 30 72,6 D450F 50 0-50 0-50,5 0,075 1,7 450 30 72,6 C4100 50 50-100 49,5-100,5 0,02 0,08 0,06 1,7 510 30 23 Ball Ø3 D4100 50 50-100 49,5-100,5 0,075 1,7 450 30 23 Ball Ø3 C4150 50 100-150 99,5-150,5 0,02 0,08 0,06 1,7 530 30 23 Ball Ø3 D4150 50 100-150 99,5-150,5 0,075 1,7 470 30 23 Ball Ø3 C8100 100 0-100 0-101 5 1,8 660 D8100 100 0-100 0-101 5 1,8 600 OD60100 100 0-100 0-101 0,3 5 1,5 2,5 1500-32 32 OD60100BJ 100 0-100 0-101 0,3 5 1,5 2,5 2300-32 132 OD80200 200 0-200 0-201 0,2 0,4 0,2 1,0 2,0 2300-100 100 Hemisphere SR 20 382 382 530 530 725 [7] [7] [16] [16] [16] [16] [17] easuring contacts easuring capacity 17 7] [16] [17] Ball Ø 2,0 mm Ball Ø 3,0 mm Ball Ø 5,0 mm Chisel R 0,75 mm Ball Ø 5,0 mm Hemisphere SR 20 mm Hb easuring contact movable Hf easuring contact fixed L easuring depth
Tube wall measurement Application range up to 100 mm 18 C1R10 D2R20 C3R30 D4R50 POCO2R
easuring span es easuring span es easuring range eb easuring range eb Range of indication Azb Scale Range interval of indication Skw Azb Permissible errors G Scale interval Skw Repeatability limit r Permissible errors G easuring force min. Repeatability easuring force limit max. r easuring Weight force min. easuring force max. Protection class Weight Type of measuring Protection class contact movable easuring contact movable Hb easuring contact movable Hb easuring contact fixed Hf Type of measuring contact Type of measuring contact easuring contact fixed Hf easuring depth bore diameter d min. L max. easuring depth Picture L max. lectronic Picture echanical echanical lectronic Wooden Wooden box box Type POCO 2R C1R10 D1R10 C1R10S D1R10S C2R20 D2R20 C2R20S D2R20S C3R30 C3R30S C4R50 D4R50 C4R50S D4R50S C8R100 D8R100 10 10 10 10 10 20 20 20 20 30 30 50 50 50 50 100 100 0-10 0-10 0-10 0-10 0-10 0-20 0-20 0-20 0-20 0-30 0-30 0-50 0-50 0-50 0-50 0-100 0-100 0 - >10 0-10,5 0-10,5 0-10,5 0-10,5 0-20,5 0-20,5 0-20,5 0-20,5 0-30,5 0-30,5 0-50,5 0-50,5 0-50,5 0-50,5 0-101 0-101 0,005 0,005 0,005 0,005 0,01 0,01 0,01 0,01 0,02 0,02 0,02 0,02 0,015 0,015 0,015 0,015 0,03 0,03 0,03 0,03 0,04 0,04 0,06 0,06 5 5 0,005 0,005 0,005 0,005 0,01 0,01 0,01 0,01 0,02 0,02 0,04 0,025 0,04 0,025 [N] 0,3 1,1 1,1 1,1 1,1 0,9 0,9 [N] 1,3 1,7 1,7 1,7 1,7 1,8 1,8 [g] 40 2 165 2 165 270 200 270 200 410 410 460 400 460 400 660 600 - Ball Ø 2,0 Ball Ø 1,5 Ball Ø 1,5 Chisel R = 0,4 Chisel R = 0,4 Ball Ø 1,5 Ball Ø 1,5 Chisel R = 0,4 Chisel R = 0,4 Ball Ø 3 Chisel R = 0,75 Ball Ø 3 Ball Ø 3 Chisel R = 0,75 Chisel R = 0,75 Ball Ø 5 Ball Ø 5 5,0 19,1 19,1 18,8 18,8 24,7 24,7 24,7 24,7 30 30 30 30 30 30 Hemisphere SR = 0,5 Ball Ø 1,5 Ball Ø 1,5 Ball Ø 1,5 Ball Ø 1,5 Ball Ø 1,5 Ball Ø 1,5 Ball Ø 1,5 Ball Ø 1,5 Ball Ø 3 Ball Ø 3 Ball Ø 3 Ball Ø 3 Ball Ø 3 Ball Ø 3 Ball Ø 5 Ball Ø 5 0,9 0,9 0,9 0,9 2,5 2,5 2,5 2,5 4 4 4,3 4,3 4,3 4,3 15 15 3 3 3 3 3 9 9 9 9 10 10 13 13 13 13 36 36 25 80 80 80 80 116 116 169 169 169 169 382 382 [21] [8] [8] [9] [9] [10] [10] [11] [11] [10] [11] [10] [10] [11] [11] [15] [15] 1732-01 easuring contacts easuring capacity 19 [8] [9] [10] [11] [15] [21] Ball Ø 1,5 mm Chisel R 0,4 mm Ball Ø 1,5 mm Ball Ø 1,5 mm Ball Ø 2,0 mm Ball Ø 3,0 mm Chisel R 0,4 mm Chisel R 0,75 mm Ball Ø 1,5 mm Ball Ø 2,0 mm Ball Ø 3,0 mm Ball Ø 5,0 mm Ball Ø 2,0 mm Hemisphere SR 0,5 mm L easuring depth Hb easuring contact movable Hf easuring contact fixed d Diameter
easurement of foamed material and foils Application range up to 100 20 C110T D220T C330T D450T POCO2T
easuring span es easuring range eb Range of indication Azb Scale interval Skw Permissible errors G Repeatability limit r easuring force min. easuring force max. Weight Protection class easuring contact movable Hb easuring contact fixed Hf Type of measuring contact easuring depth L max. Picture lectronic echanical echanical lectronic Wooden box Type [N] [N] [g] POCO 2T 10 0-10 0 - >10 0,3 1,3 40-5,0 5,0 Flat Ø 10 C110T 10 0-10 0-10,5 0,005 0,02 0,005 175 21,7 14,8 Flat Ø 6 D110T 10 0-10 0-10,5 0,005 0,02 0,005 175 21,7 14,8 Flat Ø 6 C220T 20 0-20 0-20,5 0,01 0,04 0,01 1,1 220 28,2 20,7 Flat Ø 10 D220T 20 0-20 0-20,5 0,01 0,04 0,01 1,1 220 28,2 20,7 Flat Ø 10 C330T 30 0-30 0-30,5 0,02 0,06 0,04 0,9 430 36 24 Flat Ø 50 C450T 50 0-50 0-50,5 0,02 0,08 0,06 1,7 500 36 24 Flat Ø 50 D450T 50 0-50 0-50,5 1,7 440 36 24 Flat Ø 50 C8100T 100 0-100 0-101 5 1,8 670 41 9 Flat Ø 50 D8100T 100 0-100 0-101 5 1,8 610 41 9 Flat Ø 50 OD60100T 100 0-100 0-102 0,4 0,2 1,5 2,5 1700-46 26 Flat Ø 50 36 116 382 382 555 [22] [12] [12] [12] [12] [14] [14] [14] [14] [14] [14] 1732-01 easuring contacts easuring capacity 21 [12] [14] [22] Flat Ø 6 mm Flat Ø 10 mm Flat Ø 50 mm Flat Ø 10 mm L easuring depth Hf easuring contact fixed Hb easuring contact movable
Interfaces Accessories 22 Wooden boxes for all series For order code please see technical details ( = wooden box is included in delivery) Interface adapter Data cable USB V2.0 2482-05 2 m Data cable DIGIATIC V2.0 gauge G102 (available on request) 1961-09 2482-07 2 m Data cable U-WAV V2.0 2482-01 Transmitter 2482-02 2482-04 160 mm Receiver Ø 8 Holding unit for the series C / G und D / H order code: 8004-50 Interfaces may be upgraded on demand For measuring small parts the holding unit enables the gauge (series C, G, D, H) to be used with a measuring stand
Special Gauges Definitions 23 We are always searching for the best solution for your measuring problem, either mechanical or electronic. In order to enable us to find the solution together and to design your special gauge, please kindly send us a drawing of the object to be measured and indicate tolerance and measuring force, and if possible, send us a sample of the part to be measured. Full information in your enquiry enables us to put forward the optimum design solution for your application. easurement of bottle diameters with depth measurement. easurement in hard-to-access places, with specially designed caliper arms. 0 G G Definitions Diagram of deviation measuring range +f 0 -f picture 1 The individual diagram of deviation you can see in the certificate of quality which will be sent with every gauge. Scale interval Skw easurement of wall thickness in hard-toaccess places easurement of foam materials with flat contacts and reduced measuring force. Terms of length test techniques see DIN 2257 part 1 and part 2 and International Vocabulary of Basic and General Terms in etrology. Foundations This instruction follows approximately the checking instructions of the German standard DIN 878 for dial gauges and the checking instructions for caliper gauges according to VDI/VD/DGQ 2618, page 13. The gauges are referred to as gauges with absolute measurement and adjustable zero point. Range of indication Azb The scale interval is the modification of the value of a measured variable that causes the modification of the indication by one interval. The scale interval is indicated in the unity of the measured variable. Deviation in the measuring range f The deviation in the measuring range f represents the distance of ordinates between the highest and the lowest position in the deviation diagram, when the movable caliper arm closes. The tolerance field G for f is symmetrically positioned to the zero line. Repeat precision fw The range of indication is the range between the highest and the lowest indication. easuring range eb The repeat precision fw is a characteristic value for deviations of the measured quantity within the measuring range in the same motion direction of the movable caliper arm (usually n=5). This margin of error is designated as repeat limit r. easurement of wall thicknesses at large undercuts with bayonet-type contacts (displacement in direction of the arrow before and after the measurement). The measuring range of a gauge represents the range of measuring values in which given error limits must not be exceeded. easuring span es The measuring span is the difference between starting value and final value of the measuring range. easuring force Fmin, Fmax When the caliper arm closes, the measuring force Fmax bzw. Fmin is determined at the top of the movable caliper arm. The gauge must be held in vertical position >= 200 mm
Kroeplin GmbH Gartenstraße 50 D-36381 Schluechtern Germany Phone ++49 66 61 86-0 Fax ++49 66 61 86-39 sales@kroeplin.com www.kroeplin.com Application area 24 n echanical engineering n Automobile industry n Aerospace industry n Wire manufacturers: Diameter determination of continuous wires n Glass industry: easurement of wall thickness in hard-to-access places n Dental laboratories: easurement of tooth crown thicknesses n Aerosol and packaging industry: easurement of aerosol cans n Foundries: easurement of cast wall thicknesses n Key manufacturers: easurement of milled notches of keys n Foamed material industry: easurements of foamed material thicknesses n Tube manufacturers: Internal and external measurements, also of extremely wide tubes n Ceramic industry: Safe and simple determination of contraction due to baking and drying. n Gun clubs: Checking of the admissable thickness of shooting jackets n edical institutes: Skin fold and joint measurement in human and animal subjects n Special designs: Your measuring task is among them