BMP Racing Cams Single Cam Engines BMP performance cams are manufactured from new O.E.M. or Schrick cam billets. We do not sell or recommend reground performance cams. The profiles listed are our most popular for street and some track applications. All grinds including full racing applications are shown on the BMP web site. Milder grinds are designed to work well with original carburetor or fuel injection systems. Lower duration cams offer better mid-range performance, and will work with air conditioning. For optimum performance, software modifications are recommended. More aggressive grinds require more fuel and/or custom software programming. These high duration cams afford excellent top-end performance, with marginal lower-end performance. Idle speeds are typically at 1000 R.P.M. These profiles are recommended for track use only. When installing a new cam it is imperative that you also install new rocker arms, and new rocker shafts if needed. Cams with long duration and increased lift may require additional piston-to-valve clearance. Duration( ) Lift (mm) Overlap Spring Titanium Model Year in / ex in / ex Cams Price Set Price Retainers Price 318i 83-85 284/284 7.2/9.5 110 77208 $399.95 use NEW O.E. Springs & Retainers 292/292 10.0/10.0 110 49328 $399.95 49379(3) $183.95 113107 $149.95 325i, 325ic, 525i 85-91 272/272 11.0/11.0 112 77216 $450.95 129941 $240.00 113115 $279.95 276/276 10.6/10.6 108 133361 $450.95 129941 $240.00 113115 $279.95 276/276 11.5/11.5 108 129500 $450.95 129941 $240.00 113115 $279.95 280/280 10.6/10.6 110 129518 $450.95 129941 $240.00 113115 $279.95 282/272 11.5/11.0 110 128805 $450.95 129941 $240.00 113115 $279.95 290/290 11.5/11.5 110 49301 $450.95 129941 $240.00 113115 $279.95 292/292 11.1/11.1 108 129526 $449.95 129941 $240.00 113115 $279.95 296/296 10.6/10.6 105 129534 $449.95 129941 $240.00 113115 $279.95 304/304 12.2/12.2 105 129542 $449.95 129941 $240.00 113115 $279.95 630csi, 633csi 77-82 M30 engine 276/276 11.2/11.2 112 133388 $499.95 use NEW O.E. Springs & Retainers w/mechanical distributor 276/276 11.2/11.2 108 133370 $499.95 49352(3) $259.95 113123 $229.95 280/280 10.4/10.4 110 133396 $499.95 49352(3) $259.95 113123 $229.95 282/282 10.9/10.9 110 77224 $499.95 49352(3) $259.95 113123 $229.95 288/288 10.9/10.9 112 133400 $499.95 49352(3) $259.95 113123 $229.95 290/290 11.0/11.0 108 49280 $499.95 49352(3) $259.95 113123 $229.95 533i (1), 535i, 633csi (1) 82-93 635csi, 733i (1), 735i 276/276 11.2/11.2 112 133442 $499.95 use NEW O.E. Springs & Retainers M30 engine 276/276 11.2/11.2 108 133469 $499.95 49352(3) $259.95 113123 $229.95 w/motronic ignition system 280/280 10.4/10.4 110 133477 $499.95 49352(3) $259.95 113123 $229.95 282/282 10.9/10.9 110 77232 $499.95 49352(3) $259.95 113123 $229.95 288/288 10.9/10.9 112 133485 $499.95 49352(3) $259.95 113123 $229.95 290/290 11.0/11.0 108 49310 $499.95 49352(3) $259.95 113123 $229.95 Legal in California only for racing vehicles. (1) note vehicles with push-on rotor will require one each 52728 $59.95 + 52710 $1.50 (2) Cylinder head modification required. (3) steel retainers and hardened keepers included Performance Cam Tech Tip: Select the correct cam for your application. High duration cams are very impressive at the upper R.P.M. ranges. However these same cams offer little improvement at idle or low R.P.M. Vehicles with automatic transmissions will show little improvement since the transmissions will normally shift to the next gear before the engine reaches the power band. For higher torque select a low duration cam with higher lift. For more high R.P.M. horsepower select a high duration cam. For street sport applications we recommend the cams, generally speaking, with a duration of less than 290. For track only applications we recommend the cams with greater than 290. Never use old or worn lifters on a new cam. And make sure the oilers are clean and free of debris. Heat Treated Valve Keepers With added spring pressure and R.P.M. levels the factory valve keepers are operating at their maximum stress level. To reduce the chance of failure we now offer replacement keepers that are heat treated. This is truly cheap insurance for an expensive engine. Units sold separately. Each valve requires 2 keepers. Model Size Keepers Price m42, m44, m50, m52 6mm 138363 $2.50 m20, m50 >92 7mm 138371 $2.50 m10, m30 8mm 138380 $2.50 Oversize Eccentrics When installing a reground camshaft, or a performance reground cam, you will most likely discover that the stock valve adjustment eccentrics do not have enough height to offer you the correct valve adjustment. The eccentrics listed below are exact replacements for the original units, except that they are.060 larger in diameter. Will fit all single overhead cam 4 and 6 cylinder engines. Sold individually. Models Year Eccentric Each 4 cyl. (m10) 77-85 114618 $7.95 6 cyl. (m20) 77-90 114618 $7.95 6 cyl. (m30) 77-93 114618 $7.95 Assembly Lube A must for engine assembly. Apply to all bearing surfaces, cams, rockers, rod and main bearings. Protects against galling and damage to bearing surfaces due to the initial dry running. 1.75 oz. Tube 63410 $6.95 Valve Stem Lash Caps For vehicles with excessive valve clearance, due to worn rocker arms and rocker shafts. The BMP design lash caps will add.050 of additional adjustment. An excellent choice for vehicles fitted with re-ground cams. Each lash cap sold separately. M10 M30 engines 8mm Valve Stems 24168 $5.95 M20 engines 7mm Valve Stems 83348 $6.95 42
BMP Racing Cams Twin Cam Engines The BMP design performance cams are ground on high quality new O.E.M. or Schrick cam billets. We offer a large variety of grinds for each vehicle model and engine type. The milder grinds are the best choice for mid-range performance improvements. More radical profiles are recommended for track applications only. To optimize any performance cam installation, we recommend software modifications. The more radical grinds will typically Idle at 1000 R.P.M. Since the hydraulic lifters operate in direct contact with the camshaft we always recommend new lifters. For the milder street durations cams, new O.E. springs are usable. For constant high R.P.M. and added safety we recommend purchasing a high performance spring kit. The more radical cams may require additional valve to piston clearance. ENGINE PERFORMANCE Dura( ) Lift (mm) Over Spring Titanium Model Engine Year in / ex in / ex lap Cams Price Set Price Retainers Price 318is m42 88-95 250/250 9.9/9.9 106/106 88986 $899.95 133329 $199.95 138118(1) $295.95 262/262 10.2/10.2 112/112 125334 $899.95 133329 $199.95 138118(1) $295.95 262/262 11.3/11.3 107/107 125342 $899.95 133329 $199.95 138118(1) $295.95 264/264 10.4/10.4 110/110 125369 $899.95 133329 $199.95 138118(1) $295.95 272/272 10.6/10.6 110/110 125377 $899.95 133329 $199.95 138118(1) $295.95 M3 s14 88-92 280/280 10.5/10.5 108/108 125261 $995.95 124206 $459.95 138185 $295.95 282/282 11.2/11.2 108/108 125270 $995.95 124206 $459.95 138185 $295.95 290/290 11.4/11.4 106/106 125288 $1095.95 124206 $459.95 138185 $295.95 296/296 11.6/11.6 106/106 124214 $1095.95 124206 $459.95 138185 $295.95 x 300/300 12.0/12.0 104/104 125296 $1095.95 124206 $459.95 138185 $295.95 x 308/308 11.7/11.7 106/106 125300 $1095.95 124206 $459.95 138185 $295.95 x 324/324 12.7/12.7 102/102 125318 $1295.95 124206 $459.95 138185 $295.95 x 326/326 12.9/12.9 100/100 125326 $1295.95 124206 $459.95 138185 $295.95 325i, 328i, 525i Single vanos 93-98 258/244 10.2/9.4 116-91/108 125423 $1029.95 128201 $299.95 113131 $395.95 260/248 10.6/9.5 116-91/108 124117 $1029.95 128201 $299.95 113131 $395.95 262/256 10.3/9.7 116-91/108 112950 $1195.95 128201 $299.95 113131 $395.95 272/264 10.5/10.0 116-91/108 133345 $1195.95 128201 $299.95 113131 $395.95 328i, Z3 2.8 double vanos 99-00 252/252 10.0/10.0 120/80 137804 $1195.95 Soon Soon 112/87 M3 e36 (U.S. model) 95-99 258/244 10.2/9.4 116-91/108 125423 $1029.95 128201(2) $299.95 113131(3) $395.95 260/248 10.6/9.5 116-91/108 124117 $1029.95 128201(2) $299.95 113131(3) $395.95 262/256 10.3/9.7 116-91/108 112950 $1195.95 128201(2) $299.95 113131(3) $395.95 272/264 10.5/10.0 116-91/108 133345 $1195.95 128201(2) $299.95 113131(3) $395.95 Legal in California only for racing vehicles. (1) vehicles 88-92 have 7mm valve stems use retainer kit #133680 $295.95 (2) 113131 retainers are required, $395.85 (3) These retainers will not fit O.E. springs. O.E. Springs require#119229 $375.95 Adjustable Cam Sprockets M3, M5, M6 Exhaust Cam Gear Rocker Arm Retainers All stock BMW engines have only one choice for cam timing. This choice is limited to alignment of a single dowel pin and bolt pattern, which dictates the exact timing of the cam. In a performance or racing application, moving the cam timing only a few degrees can improve mid-range torque or maximize top end horsepower. Model Engine Year Sprocket Price 318i Single row M10 83-85 122092 $129.95 5,6,7 Single row M30 79-92 125440 $129.95 not 528e or M engines 325e, 325i M20 84-91 121576 $275.95 Combined with the BMP chip the M engine will show an additional mid-range improvement by simply retarding the exhaust cam shaft. Kit comes complete with special cam sprocket, new lock plate, and instructions. New valve cover gasket recommended M3 88-91, M5-M6 up to 88 81086 $169.95 Legal in California only for racing vehicles On all early single-cam, 4 cylinder and chain-driven, 6- cylinder engines the rocker arms are held in position by a tensioner spring. In high R.P.M. situations these springs permit the rocker to move laterally. Rocker arm failure is the result. Once the rocker leaves the valve stem contact area the rocker will bind against the retainer resulting in broken rocker arms. The BMP retainers will stop high R.P.M. rocker arm movement. The two-piece billet aluminum construction permits installation without cylinder head removal. Model Eng Year Requires Each Price 318i m10 83-85 8 113174 $15.95 5,6,7 series m30 77-93 12 113174 $15.95 43
BMP design Underdrive Pulley Sets What is Underdriving? ENGINE PERFORMANCE The concept is simple. Each driven external engine accessory (alternator, water & powersteering pump, A/C compressor), draws a certain amount of horse power. Add this load to the rotating mass (or weight) of each accessory s moving components, and you can expect to loose upwards of 10% of the engine s gross horse power. By increasing the pulley diameter of the driven components we reduce the drive ratio of those components, consequently reducing the load required to drive them. This is similar in concept to riding a bicycle in low gear versus high gear. In Low, pedaling is much easier and acceleration is faster. High gear requires more of your power, and acceleration is slow. Our underdrive pulley concept essentially transfers some of the available engine power output from the driven external accessories to the flywheel-end of the crankshaft. This increases the power propelling the car, without sacrifice to the accessories. The reduced ratio also slows the accessory speed, which at race track R.P.M. reduces the wear to each component. For vehicles with high-amp stereo requirements, we offer the audiophile series which uses a standard-size alternator pulley to maintain maximum alternator output. All BMP underdrive pulley sets are manufactured from lightweight 6061-T6 billet aluminum, CNC machined to ±.001 tolerance, ensuring the best strength, balance, and fitment. Final coating is hard-anodized for additional protection. Each pulley utilizes lightening holes to reduce weight yielding the most horsepower gains. Typical gains are +12 HP and +8 lb/ft of torque across the RPM range. New!! Model Body Year Alt. type Pieces Power Audio Price 323, 325, 328, M3 e36 92-98 Bosch 3 167088 167096 279.95 323, 325, 328, M3 e36 92-98 Valeo 3 167118 167126 279.95 M3 Euro S50/S52 e36 92-98 Bosch 3 167134 279.95 M3 Euro S50/S52 e36 92-98 Valeo 3 167142 279.95 2.3, 2.5, 2.8, MZ3 e36/7 96-00 Bosch 3 167169 167177 279.95 2.3, 2.5, 2.8, MZ3 e36/7 96-00 Valeo 3 167185 167193 279.95 MZ3 S54 e36/7 00-02 3 167207 167215 349.95 525, 528, 530 e39 96-02 Bosch 3 167223 167231 279.95 525, 528, 530 e39 96-02 Valeo 3 167240 167258 279.95 540 M60, M62 e39 96-8/98 3 167266 399.95 540 M60, M62 e39 9/98-02 3 167274 399.95 M5 e39 99-02 6 167282 749.95 M5 e39 99-02 6 167304 799.95 740 M60,M62 e38 95-8/98 3 167053 399.95 740 M60,M62 e38 9/98-02 3 167070 399.95 323, 325, 328, 330 e46 99-02 Bosch 3 167312 167339 279.95 323, 325, 328, 330 e46 99-02 Valeo 3 167347 167355 279.95 M3 e46 00-04 3 167363 167371 349.95 Z8 e52 00-02 6 167380 699.95 Z8 e52 00-02 6 167398 799.95 Z4 e85 2004 3 167401 279.95 Z4 e85 2004 4 167410 279.95 BMP design Performance Chips With the complexity of today's engine management systems proper tuning for optimum performance requires extensive knowledge plus an array of high-tech analysis and test equipment. A combination of hardware and software allows access to, and control over, the tuning data stored in an engine s control unit. The days of the guess and burn chip designer are gone! All of the BMP design chips are developed using a Mustang dynamometer and a Horiba air/fuel ratio analyzer. The Horiba air/fuel ratio analyzer provides very accurate and fast measurements of the oxygen content of the exhaust, translaings these values directly to an air/fuel ratio number, as the existing oxygen sensor does. The Mustang dynamometer used by BMP incorporates powerful electric power-absorbers, capable of holding up to 550 horsepower (at the wheels) in a steady-state situation. A two man team handles the final real world road testing and fine tuning. The engineer makes tuning changes according to feedback from the trained test driver. The immediacy of the comment-change-feedback is possible only with such advanced equipment. This guarantees the finest performing software packages available. BMP Hot Chips BMP design not only offers a high performance chip upgrade for your stock BMW. We also offer a complete program of custom chips for some of the more common bolt-on performance upgrades. These up-grades include, high flow air filter systems, free flow exhaust systems, performance camshafts, big bore throttle bodies, and light weight flywheels. We have experienced additional gains of up to 3 horsepower by optimizing the air/fuel ratio for each of these custom applications. Smoother and more consistent power gains across the entire power band are additional benefits of the BMP custom performance chips. For more information about performance gains and specific vehicle applications, call and speak to a sales representative. Due to marginal performance gains on O.B.D.II vehicles (96-00). We do not offer a performance chip program for those vehicles. BMP Performance E-prom Model Year Price 4,6,8 cylinder cars 85-1/95 $249.95 4,6,8 cyl. with E.W.S. 2/95-95 $299.95 12 cylinder cars 88-95 $425.00 BMP Custom E-prom (Hot chips) Model Year Price 4,6,8 cylinder cars 85-1/95 $299.95 4,6,8 cyl. with E.W.S. 2/95-95 $350.95 44
G-TECH Pro Performance Road Racer Meter ENGINE PERFORMANCE The new G-TECH Pro Performance Road Racer Meter is a very sophisticated and cutting-edge automotive tuning instrument that consists of a high precision, 3-axis sensor. From simple RPM recording to complete data acquisition, the G-TECH Pro Performance Road Racer Meter fits the bill. For the serious automotive enthusiast who is looking to improve as a driver, this instrument will help to analyze shift points, record acceleration runs for comparisons and deliver horsepower and reaction times with great accuracy. Includes Intelligent Shift features which monitor and indicate delivered horsepower, so you can determine optimum shift points in each gear, thereby extracting optimal performance from your engine. Adjustable traction light alerts you when there is a loss in traction during acceleration to fine-tune the wheel spin you desire. Corning light monitors lateral Gs and progressively warns the driver as you get closer to the limit. Just imagine having all that power and knowledge at your fingertips whenever you need it. Perfect for before and after tests of modifications without the hassle of scheduling dyno runs. Store up to 30 runs internally, which can later be downloaded to your computer for further analysis. Additionally the G- TECH Pro Performance Road Racer Meter can record over 2 hours of data-acquisition with its 2 Megs of built-in flash memory. All of this can be downloaded to your PC for analysis via G-Tech s Performance Analysis System Software (PASS) which allows you to overlay multiple runs, compare before and after results, review road racing laps, and much more. The G-TECH Pro Performance Road Racer Meter Kit includes G-TECH Pro Performance Road Racer Meter, power adapter, cigarette lighter adapter, mounting hardware, PC software, serial cable, and manual. PC Requirements: Windows 98 SE or newer, screen resolution of 1024x768 or greater, 32Mb of RAM, 20Mb of hard disk space, serial port or USB to serial adapter. Reaction Time 0-60ft Time 0-330ft Time 0-60mph time 1/8 mile E.T. and Speed 1000ft Time Measurements Include: 1/4 mile E.T. and Speed Horsepower Torque RPM Braking Distance Lateral Gs Accelerating and Braking Gs RPM vs. Time Graph HP/Torque vs. RPM Graph Speed vs. Time Graph Speed vs. Distance Graph Gs vs. Time graph. Part # Price 167983 $299.95 Carbon Fiber Valve Covers New!! Carbon Fiber Blower Cover This is a replica of the factory metal blower cover. Construction is of super light weight vacuum bagged carbon fiber. Great for dressing up the engine compartment and reducing weight. Some drilling required. Give your BMW that high tech look that says BMW all over it by dressing up your engine with our new carbon fiber fuel rail and valve cover. Both components replace the factory plastic covers. Available for both early and late style valve covers. Model Body Year Carbon kit Price 325i, M3, 525i e36 92-95 93297 $325.00 328i, M3 e36 96-99 130575 $325.00 323i, 325i, 330i e46 99-04 166090 $325.00 Z3 2.8 e36/7 96-98 130575 $325.00 Z3 2.5, 2.8, 3.0 e36/7 99-02 166090 $325.00 Z4 2.5, 3.0 03-04 166090 $325.00 525i e34 91-95 93297 $325.00 528i e39 96-98 130575 $325.00 e39 99-02 166090 $325.00 525i, 530i e39 99-02 166090 $325.00 Model Body Year Item Price 325e, 325i e30 84-91 129160 $169.95 M3, 318i, 318is e30 84-91 129160 $169.95 45
EVO-3 Red Silicone Plug Wires For e30 M3 Only This product is for e30 M3 cars only. Connector ends are original Bremi resistor connectors. The red silicone connector ends and seals are available exclusively through BMP design. See chart below for applications. Model Body Year Wire Set Price 318i e30 84-85 25950 $75.95 318is, 318ic e30 89-92 99252 $129.95 M3 BLUE e30 87-92 55590 $179.95 M3 RED e30 87-92 97136 $179.95 318i, 318is e36 92-93 99252(2) $129.95 318i, is, ti, Z3 1.9 e36 94-98 100510(2) $119.95 323i e30 83-86 24238 $99.95 325e, 325, 325i e30 84-87 24248(1) $97.95 e30 88-91 55603 $159.95 528e e28 82-88 24248 $97.95 533i e28 82-84 24298 $99.95 535i e28 85-88 55611 $99.95 M5 BLUE e28 85-89 55646 $199.95 M5 RED e28 85-88 131164 $239.95 630csi, 633csi e24 77-81 24278 $89.95 633csi e24 82-84 24298 $99.95 635csi e24 85-5/87 55611 $99.95 635csi, L6 e24 6/87-89 95419 $169.95 M6, M635csi BLUE e24 85-89 55646 $199.95 M6, M635csi RED e24 85-89 131164 $239.95 525i (m20) e34 89-90 55603 $159.95 535i e34 89-93 95419 $169.95 M5 e34 90-93 69019 $299.95 735i, 735il e32 88-93 95419 $169.95 750i, 750il e32 88-94 Left 94960 $199.95 Right 94978 $199.95 750i (e38) e38 95-96 Left 100528 $229.95 Right 100536 $229.95 (1) Late 87 models with impulse trigger use: 55603 $159.95 (2) Available in Black only High Performance Ignition Wire Sets The highest quality spark plug wires. Available for most BMW cars. The increased voltage output of today s ignition systems require wires that can properly insulate against grounding or cross-fire. Our high performance, double-wrapped, 7mm dia. plug wire sets will resist temperatures up to 600 F. They are constructed of a copper core, multi-strand wire, wrapped with two layers of silicone rubber. BMP performance plug wire sets are built to exact factory blue prints. Late model cars sets include new impulse sensor cable. As an added bonus, BMP silicone wire sets are supplied with high temperature silicone grease facilitating future removal of the connectors. Why insist On Copper Core Wire? Each plug wire lead in a BMW s wire set must have the exact same resistance ± 10% of a specific value which is unique to the ignition system. Since each lead of a wire set has a different length, this can only be achieved by using copper wire (no resistance) with specific value resistorized ends. Our plug wire sets are manufactured to exact O.E. drawings with 19 strands of tinned copper wire and exact resistorized ends. The precise resistance values can NOT be achieved with Spiro-Core wire! Spiro-core wire was developed for American and Japanese cars that do not required a specific ignition resistance. Using spiro-core wire eliminates the use of the more expensive resistor type plug connectors, which are used on all European automobiles. The difference is that not all plug wires are equal length. With Spiro-core wire this is why resistance values of number 1 spark plug wire are much different than the values of cylinder number 6. The resistance will vary as much as 1000 ohms. per foot of spark plug wire. Wire Insulation: The purpose of good wire insulation is to protect the cable from voltage leaks. The single most important factor for rating insulation performance is the material, not the thickness. Silicone, while resisting temperatures of up to 600 degrees, will give you the greatest protection against these voltage leaks. BMP wire sets are manufactured with2 layers of high quality silicone, unlike some manufactures who use 1 layer of silicone over a less expensive inferior layer. Our product uses 7.0mm, double-wrapped silicone over 19 strand copper core wire. This is the correct wire diameter which fits perfectly into the Factory type plug and cap connectors. Direct-Fire Plug Connectors When replacing the spark plugs on your direct fire ignitions systems we recommend replacing the spark plug connectors. In many cases the resistor in the connector has been damaged due to extreme engine heat or high voltage. Model Body Year Qty items Price 325i, M3, 525i e36 92-95 6 166910 $10.95 323i, 328i, M3 e36 96-98 6 166928 $10.95 Z3 2.8, 3.0 e36/7 96-98 6 166928 $10.95 323i, 328i, 330i e46 99-02 6 166928 $10.95 525i e34 91-95 6 166910 $10.95 540i e34 92-95 8 166910 $10.95 525i,528i, 530i, X5 3.0 e39 96-02 6 166928 $10.95 540i, M5, X5 4.4 e39 96-02 6 166928 $10.95 740i e32 92-95 8 166910 $10.95 e38 96-01 8 166928 $10.95 New!! 46
Platinum + 4 The most advanced spark plug you can buy! Unique four-ground-electrode design. 75% more pure platinum vs.bosch Platinum. Gap is pre-set at the factory. Four-ground electrodes provide optimal access to the air/fuel mixture for the most efficient combustion and longer life. Pure platinum technology. Only Bosch uses a pure platinum center electrode that s heat-fused, to reach its self-cleaning temperature faster for smoother acceleration, improved fuel efficiency and optimal engine performance. Platinum + 4 adds 75% more pure platinum to its center electrode than Bosch Platinum. Only Bosch adds an Yttrium alloy to its four ground electrodes, providing up to double the wear resistance of a standard plug ground electrode. The gap remains unchanged, providing a longer performance life. Billet Oil Caps Accenting the engine compartment with billet aluminum components has become more and more popular over the years. Now you can add this touch to your engine. The BMP design billet oil cap is machined from solid aluminum and includes an O.E.M. cap seal. All colors priced the same at: $29.95 ea. Model Body Year BMP# Price 318i e30 84-85 128589 $6.95 318is, Z3 1.9 e36 91-98 128562 $6.95 325e, 325 e30 84-91 128589 $6.95 325i e30 87-91 128597 $6.95 M3 e30 87-92 None 318is, ti e36 92-99 128562 $6.95 325i, 328i e36 92-98 128562 $6.95 M3 e36 95-99 128562 $6.95 Z3 1.9, 2.5, 2.8 e36/7 95-00 128562 $6.95 MZ3 roadster & coupe e36/7 98-00 128562 $6.95 323i, 328i. 3.0 e46 99-01 128627 $6.95 528e, 533i, 535i e28 82-88 128589 $6.95 M5 e28 85-88 None 525i (m20) e34 89-90 128597 $6.95 535i e34 89-94 128597 $6.95 525i(m50), 528i e34 91-95 128562 $6.95 M5 e34 89-92 None 530i, 540i e34 93-95 128562 $6.95 528i e39 96-99 128562 $6.95 540i e39 93-97 128562 $6.95 98-00 128619 $6.95 X5 4.4 e53 98-00 128619 $6.95 630csi, 633csi, 635csi e24 77-80 128589 $6.95 81-87 128589 $6.95 88-89 128597 $6.95 M6, M635csi e24 85-89 None 735i, il e32 88-94 128597 $6.95 740i, il e32, e38 93-97 128562 $6.95 e38 98-00 128619 $6.95 750il e32 88-94 128619 $6.95 750il e38 95-00 128627 $6.95 Motor Sport Style - 167835 Model Engine Body Year Silver Blue Red Motor Sport 318is m42 e30 88-91 142786 145971 145980 167835 3series m50,52 e36,46 92-03 142786 145971 145980 167835 Z3 all all e36/7 95-02 142786 145971 145980 167835 525i m50 e34 90-95 142786 145971 145980 167835 530i, 540i m60,62 e34 92-95 142786 145971 145980 167835 5series m52,62 e39 96-03 142786 145971 145980 167835 X5 m52,62 e53 00-03 142786 145971 145980 167835 740i, il m60,62 e38 95-03 142786 145971 145980 167835 Oil Filter Heat Sink M3 e30 Oil Pan Baffle A common reason for bearing failure on the M3 (e30) engine is oil starvation during high speed turns. Heightened G-forces in the corner cause the oil to climb the sides of the engine block, leaving the oil pump pick-up without an adequate supply of oil. Evidence of this is a severe drop in oil pressure during a high speed corners. The baffle installation does require oil pan removal. Lower pan gasket required #61166 $3.69. Model Year Baffle Price M3 e30 88-92 128813 $39.95 This unique oil cooler fits around your factory oil filter and helps dissipate engine oil temperature. The principle is identical to the cooling fins on an air cooled motorcycle engine. Installation is simple and requires only minutes. The unit slips over your oil filter and secures with the 2 allen bolts provided. Model Engine Year Blue Silver Red Price 318i m10 83-85 139084 139092 139106 $21.95 323i, 325e, 325i (1) 528e, 525i m20 82-90 139068 139076 139050 $21.95 (1) will not fit vehicles with factory oil coolers 47
Aluminum Water Manifold High Temperature Hood Pads The factory water manifold on all M50 and M52 engines are manufactured from a super durable high quality plastic. Unfortunately plastic will not handle the heat, or over torquing of the mount bolts. Water leaks and overheating has claimed many of these engines do to the failure of the original plastic component. We have now reproduced this item in low pressure cast aluminum. Even if the original unit on your vehicle is not leaking at this time we strongly recommend replacing this item. We recommend also replacing the profile gasket at the same time. Model Year Item Price 323i, 325i, 328i e36 92-98 138568 $39.95 M3 3.0, 3.2 e36 95-99 138568 $39.95 525i (m50) e34 91*-95 138568 $39.95 Requires 1 Profile gasket 138398 $1.32 Increased Temperature Thermal Time Switch All Fuel Injected Models - 75-86. Improves cold and hot starting. Actuates cold start valve for up to 9 seconds regardless of outside temperature. In many cases cures the common HOT starting problem experienced by many BMW owners. Model Switch Price K or L-Jetronic 24418 $89.95 Manufactured from 1/2 aircraft quality acoustical foam, faced with a fiberglass reinforced aluminized Mylar. This coating prevents oil penetration which is the major reason for the failure of the original BMW pieces. The reflective quality reduces engine heat transfer. Requires a contact cement adhesive. Select your application below or you may purchase a full sheet 32 X 54, excellent for inner door sound insulation. Model Year Pieces Pad Price 3 Series (e30) 83-91 3 30861 $79.95 5 Series (e28) 82-88 3 30921 $79.95 6 Series 77-89 3 30931 $79.95 Full Sheet 36 X 54 1 49638 $69.95 48