Industrial Communication

Industrial Communication 0 Universal PCI/PCI Communication Cards 0- Industrial Communication Cards Selection Guide 0-3 Universal PCI/PCI Cards PCI-0A/B, 0A/B -port RS-/ PCI Communication Cards 0- PCI-03 -port Isolated RS-3/Current-loop PCI Communication Card 0- PCI-0A/B/CU(new) -port RS-3 PCI Communication Cards 0- PCI-U (new) -port RS-/ Universal PCI Comm. Card w/ Surge & Isolation 0- PCI-A/B/U/CU -port RS-3// PCI Communication Cards 0- PCI-0A/B/U -port RS-3 PCI Communication Cards 0- PCI-CU (new) -port RS-/ Universal PCI Comm. Card w/isolation & Surge Protection 0-0 Universal PCI Low-profile Cards PCI-0UP -port RS-/ Low-profile and Universal PCI Communication Card 0- PCI-0UP -port RS-3 Low-profile and Universal PCI Communication Card 0- PCI-0UP -port RS-3 Low-profile and Universal PCI Communication Card 0- ISA-bus Communication Cards PCL-0/ /-port RS-3///Current-loop Interface Cards 0-3 PCL-3B/S, B/S -port High-speed RS-/ Interface Cards 0- PCL-+ -port RS-3// Interface Card 0- PCL-A/B -port High-speed RS-/ Interface Card 0- PCL-A/B/+/L -port RS-3 Interface Cards 0- PCL-A/B -port High-speed RS-3 Interface Card 0- PC/0 Communication Cards PCM-30 Isolated RS-3// Module 0- PCM-3 -port RS-/ Module 0- PCM-3 -port RS-/ High-Speed Module 0- PCM-3 -port RS-/ High-Speed Module 0-0 PCM-30/3 -port RS-3 High-speed Modules 0-0 PCM-30 Jumperless Ethernet Module 0- PCM-3 PC/0 plus Ethernet Module 0- Intelligent Communication Cards PCI-U (new) -port Intelligent RS-3/ Universal PCI Communication Card 0- PCL-+ -port Intelligent RS-3/ ISA Communication Card 0-3 CAN Communication Cards PCI-0U -port Isolated CAN Interface Universal PCI Communication Card 0- PCL- -port Isolated CAN-bus Interface ISA Communication Card 0- PCM-30 -port Isolated CAN Interface PC/0 Module 0- Fieldbus Communication Fieldbus Communication Overview 0- Profibus AD-CIF0-PB Profibus DP/FMS Master PCI Card 0- AD-CIF0-PB Profibus DP/FMS Master PC/0 Module 0- AD-CIF0-DPS Profibus DP Slave PC/0 Module 0- AD-CIF0P-PB Profibus DP/FMS Master PC/0+ Module 0- DeviceNet AD-CIF0-DNM DeviceNet Master PCI Card 0- AD-CIF0-DNM DeviceNet Master PC/0 Module 0- AD-CIF0-DNS DeviceNet Slave PC/0 Module 0- AD-CIF0P-DNM DeviceNet Master PC/0+ Module 0- CANopen AD-CIF0-COM CANopen Master PCI Card 0- AD-CIF0-COM CANopen Master PC/0 Module 0- AD-CIF0-COS CANopen Slave PC/0 Module 0- AD-CIF0P-COM CANopen Master PC/0+ Module 0- SyCon Fieldbus System Configurator 0-30

0- Universal PCI/PCI COMM Card Series The PCI Local Bus is a high-performance bus that provides a processor-independent data path between the CPU and high-speed peripherals. PCI is a robust interconnection mechanism designed specifically to accommodate multiple high performance peripherals for serial communication, SCSI, LAN, etc. Advantech serial communication cards leverages the Plug & Play capability defined in the PCI./. bus specification, and are available with up to ports. The board requires only one PCI slot within the personal computer and provides independent serial channels. All channels are addressed in a continuous 3 byte I/O block for simplified software access. And, all channels may also share one PCI interrupt. An interrupt status register is available for determining the interrupt source. The Advantech PCI communication cards come with standard PCI/PCI UARTs containing byte FIFOs which are available as an option. These upgraded FIFOs greatly reduce CPU overhead and are an ideal choice for demanding multi-tasking environments. The Advantech PCI communication cards are available with optical isolation up to 3000 V DC. This protects your PC and equipment against damages from ground loops, which increases system reliability in harsh environments. To further increase reliability, the boards offers surge protection; protecting your system from abrupt high voltage surges (up to 3000 V DC ), such as those caused by lightning during thunderstorms. PCI/PCI UART The PCI/PCI is a high performance Quad UART with an on-chip PCI interface. Targeted at PCI-based serial and parallel expansion cards, PCI-architecture computer systems and embedded applications, the PCI/PC integrates a PCI bus interface together with four C0 high performance UARTs, a bi-directional parallel port and a local bus bridge function. This single-chip solution replaces five or more integrated circuits used in today's products, giving performance, cost and size advantages to new designs. Quick Troubleshooting PCI bus specification./. compliant s up to. kbps UARTs with -byte standard I/O address automatically assigned by PCI Plug & Play OS supported: Windows /ME/000/XP, Linux (by product) Optional surge protection up to 3,000 V DC Optional isolation protection for RS-/ up to 3,000 V DC Interrupt status register for increased performance Space reserved for termination resistors Automatic RS- data flow control Communication performance analysis tools Advantech provides easy-to-use analysis tools and utilities that allows you to monitor or log data between two communicating devices, and help you acquire the data within a friendly user interface. Diagnostic functions make the installation process trouble free. An RS- Network with Automatic Data Flow Control Using RS-3 Software The RS- mode automatically senses the direction of incoming data and switches its transmission direction accordingly. The feature makes your network look and act just like an RS-3 network. Application software written for half duplex RS-3 can be used without modification. Moreover, you can simply and quickly build an RS- network with just two wires. Industrial Communication

Industrial Communication Cards Selection Guide Quick Appendix of Advantech Industrial Communication Cards Bus Model Name Port Communication Interface Protection Cable Connector Page Type PCI-0UP V V 00 V Universal Low DC 00 V DC DB Male 0- PCI-0UP V 00 V Profile PCI DC DB Male 0- PCI-0UP V 00 V DC DB Male 0- PCI & Universal PCI Form Factor PCI PC/0 PC/0 Plus ISA PC/0 PCI-0A V V - 0- PCI-0B V V 00 V DC - 0- PCI-0A V V 3000 V DC - 0- PCI-0B V V 00 V DC 3000 V DC - 0- PCI-03 V V 3000 V DC - 0- PCI-0U V 00 V DC - 0- PCI-0A V DB Male 0- PCI-0A/ V DB Male 0- PCI-0B V 3000 V DC DB Male 0- PCI-0B/ V 3000 V DC DB Male 0- PCI-0CU V 00 V DC 00 V DC D Male 0- PCI-0CU/ V 00 V DC 00 V DC DB Male 0- PCI-U V V 00 V DC 000 V DC DB Male 0- PCI-U/ V V 00 V DC 000 V DC DB Male 0- PCI-A V V V DB Male 0- PCI-A/ V V V DB Male 0- PCI-B V V V 00 V DC DB Male 0- PCI-B/ V V V 00 V DC DB Male 0- PCI-U V V V 00 V DC DB Male 0- PCI-U/ V V V 00 V DC DB Male 0- PCI-CU V V V 00 V DC 00 V DC DB Male 0- PCI-CU/ V V V 00 V DC 00 V DC DB Male 0- PCI-0A V Optional 0- PCI-0B V 3000 V DC Optional 0- PCI-0U V 00 V DC Optional 0- PCI-CU V V 00 V DC 00 V DC DB Male 0-0 PCI-U * V V Optional 0- PCL-0 V V V V - 0-3 PCL- V V 00 V DC - 0-3 PCL-3B V V - 0- PCL-3S V V 00 V DC - 0- PCL-B V V 3000 V DC - 0- PCL-S V V 00 V DC 3000 V DC - 0- PCL- V 000 V DC - 0- PCL-+ V V V DB Male 0- PCL-+/ V V V DB Male 0- PCL-A V V 000 V DC DB Male 0- PCL-B V V 000 V DC 000 V DC DB Male 0- PCL-A V DB Male 0- PCL-A/ V DB Male 0- PCL-B V 3000 V DC DB Male 0- PCL-B/ V 3000 V DC DB Male 0- PCL-+ V 3000 V DC DB Male 0- PCL-+/ V 3000 V DC DB Male 0- PCL-L V DB Male 0- PCL-L/ V DB Male 0- PCL-+* V V Optional 0-3 PCL-A V Optional 0- PCL-B V 3000 V DC Optional 0- PCM-30 V V V 000 V DC - 0- PCM-3 V V - 0- PCM-30 V 000 V DC - 0- PCM-3 V V 000 V DC - 0- PCM-30/3 V - 0-0 PCM-3 V V 000 V DC - 0-0 Fieldbus Communication Interface Support Type Model Name Page Yes Yes Yes AD-CIF0-PB 0- Yes Yes AD-CIF0-DNM 0-30 Yes Yes AD-CIF0-COM 0-3 Yes Yes Yes AD-CIF0-PB 0- Yes Yes AD-CIF0-DPS 0- Yes Yes AD-CIF0-DNM 0-30 Yes Yes AD-CIF0-DNS 0-30 Yes Yes AD-CIF0-COM 0-3 Yes Yes AD-CIF0-COS 0-3 Yes Yes Yes AD-CIF0P-PB 0- Yes Yes AD-CIF0P-DNM 0-30 Yes Yes AD-CIF0P-COM 0-3 Accessories (Optional) Cable Connectors * Intelligent Communication Card Cable Connector Type DB Female DB Male DB Male Online Download www.advantech.com/products DB Male DB Female Model Name OPTA OPTB OPTC OPTH OPTE+ Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-3

0- PCI-0 PCI-0 PCI-0 PCI-0 Bus Interface PCI bus spec.. compliant All ports use the same IRQ assigned by PCI Plug & Play Data Bits,,, Stop Bits,., None, even, odd Communication PCI Controller 0 bps ~. kbps Data Signals TxD, RxD, RTS, CTS (RS-/) Surge Protection 00 V DC (PCI-0B/PCI-0B only) ESD Protection kv Isolation Protection 3000 V DC (PCI-0A/B only) Power Consumption Typical Max PCI-0 0 ma (+ V) 0 ma (+ V) PCI-0 0 ma (+ V) 300 ma (+ V) Dimensions 3 x mm (. x 3. ) Operating Temperature 0 ~ C (refer to IEC --, ) (3 ~ F) Operating Humidity ~ % Relative Humidity, non-condensing (refer to IEC --3) Storage Temperature - ~ C (-3 ~ F) -port RS-/ PCI Communication Card -port RS-/ PCI Communication Card, w/isolation Protection PCI bus specification. compliant s up to. kbps -port RS-/ interface I/O address automatically assigned by PCI Plug & Play OS support: Windows /ME/000/XP Optional surge protection Optional isolation protection for RS-/ Interrupt status register for increased performance Space reserved for termination resistors Automatic RS- data flow control Powerful and easy-to use utility (ICOM Tools) PCI-0 and PCI-0 are port RS-/ PCI communication cards that are compatible with the PCI. bus specification. Both cards provide two optional isolated and surge protected RS-/ ports, and comes with features such as: high transmission speed of. kbps, optional surge & isolation protection, windows utility software and more. The cards also come with high-performance PCI UART with a -byte FIFO to reduce CPU load. This makes the PCI-0 and PCI-0 especially suitable for multitasking environments. PCI-0 is available with 3000 V DC optical isolation to protect your PC and equipment against damages from ground loops in harsh environments. To further increase reliability, both boards has surge protection technology, protecting your system from abrupt high voltages up to 00 V DC (PCI-0B and PCI-0B). Besides, Advantech also provides a convenient utility program called ICOM Tools, to help test the PCI card performance by analyzing the port status. Controlled by easy-to-use menu commands and toolbar buttons, ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitors the signal status. In addition, ICOM Tools is applicable to all series of Advantech ICOM cards. PCI-0A PCI-0B PCI-0A PCI-0B -port RS-/ PCI COMM Card -port RS-/ PCI COMM Card, w/surge protection -port RS-/ PCI COMM Card, w/isolation protection -port RS-/ PCI COMM Card, w/isolation and surge protection Industrial Communication

PCI-03 Bus Interface PCI bus spec.. compliant PCI Interface PCI Universal card All ports use the same IRQ assigned by PCI Plug & Play Data Bits,,, Stop Bits,., None, even, odd Communication PCI Controller RS-3: 0 bps ~ 30. kbps Current Loop: 0 bps ~. kbps Data Signals RS-3: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI Current Loop: Tx+, Tx-, Rx+, Rx- Power Requirement + V (0 ~ 300 ma) ESD Protection kv Isolation Protection 3,000 V DC for RS-3 and current-loop Dimensions 3 x mm (. x 3. ) Operating Temperature 0 ~ C (refer to IEC --, ) (3 ~ F) Operating Humidity ~ % Relative Humidity, non-condensing (refer to IEC --3) Storage Temperature - ~ C (-3 ~ F) Current-loop Interface -port Isolated RS-3/Current-loop PCI Communication Card Two independent RS-3 or Current-loop serial ports Each port can be individually configured to RS-3 or current-loop PCI FIFO UART (-byte FIFO) PCI bus specification. compliant s: RS-3: 0 bps ~ 30. kbps Current-loop:. kbps I/O address automatically assigned by PCI Plug & Play OS supported: Windows /ME/000/XP, Linux Interrupt status register for increased performance Powerful and easy-to use utility (ICOM Tools) The PCI-03 offers a versatile range of high speed interfacing options. You can switch its ports between the popular RS-3 or noise-resistant current-loop. The card utilizes PCI UARTs with -byte FIFO buffer for faster and more reliable communication, especially under multi-tasking environments such as Windows operating systems. The PCI-03 provides two isolated RS-3 or current-loop serial ports. You can configure each port individually to RS-3 or current-loop using on-board jumpers. The card utilizes PCI UART that buffers data into packets before sending it to the bus. This drastically reduces CPU load and avoids data loss when the system is busy and cannot process an interrupt quickly. These FIFO buffers make the PCI-03 especially suitable for high speed serial I/O under Windows. Onboard optical isolators protect your PC and equipment against damage from ground loops, increasing system reliability in harsh environments. Pin Assignments PCI-03 -port Isolated RS-3/current-loop PCI Comm. Card Online Download www.advantech.com/products DCD RxD TxD DTR GND 3 RS-3 DSR RTS CTS RI Signal Driver/receiver N3 Signals TxD+, TxD-, RxD+, RxD- Current Value 0 ma (Standard) Mode Asynchronous, full duplex Baud-rate 0 ~ 00 bps Transmission Distance 000 m TxD- TxD+ RxD+ RxD- 3 Current-loop Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-

0- PCI-0A PCI-0B PCI-0CU NEW PCI-0A/B PCI-0CU Bus Interface PCI bus specification. (PCI-0A/0B),. (PCI-0CU) compliant IRQ All ports use the same IRQ assigned by PCI Plug & Play Data Bits,,, Stop Bits,., None, even, odd Communication PCI Controller 0 bps ~. kbps Data Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI Surge Protection,00 V DC (PCI-0B/0CU only) ESD Protection kv Isolation Protection,00 V DC (PCI-0CU only) Power Consumption Typical + V: 0 ma + V: 0 ma Max + V: 0 ma + V: 0 ma Power Requirement ± V Dimensions (L x W) 3 x mm (." x 3.") (for 0A and PCI-0B) x 00 mm (.3" x 3.") (for PCI-0CU) Operating Temperature 0~ C (refer to IEC --, ), (3 ~ F) -port RS-3 PCI Communication Card -port RS-3 PCI Communication Card, w/surge Protection -port RS-3 Universal PCI Communication Card, w/isolation & Surge Protection PCI bus specification.(pci-0a/0b),. (PCI-0CU) compliant s up to. kbps -port RS-3 PCI UARTs with -byte FIFOs standard I/O address automatically assigned by PCI Plug & Play OS supported: Windows /ME/000/XP, Linux Interrupt status register for increased performance Space reserved for termination resistors Powerful and easy to use Utility (ICOM Tools) Universal PCI (PCI-0CU only),00 V DC Surge Protection (PCI-0B/0CU),00 V DC Isolation Protection (PCI-0CU only) The PCI-0 is a -port RS-3 PCI communication card that is compatible with the PCI. bus specification. (PCI-0CU is also compliant with.) and offer transmission speeds up to. kbps. PCI-0B and PCI-0CU provides four optional surge protected RS3// ports and four independent RS-3 ports. PCI-0 also comes with high-performance PCI UART with a -byte FIFO to reduce CPU load. These components make your system more stable and reliable. Thus, the PCI-0 is especially suitable for multitasking environments. PCI-0CU has a universal PCI connector that is compatible with both newer 3.3 V signaling systems and the traditional V signaling system. This gives high compatibility and allows usage in diverse systems. To further increase reliability, the PCI-0B and PCI-0CU offers surge protection technology, protecting your system from abrupt high voltages up to,00 V DC. PCI-0CU also provides,00 V DC isolation to protect your PC and equipment against damages from ground loops in harsh environments. Advantech also provides a convenient utility program, ICOM Tools, to help test the PCI card performance by analyzing the port status. With menu commands and toolbar buttons, ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitor the signal status. ICOM Tools is applicable to all series of Advantech ICOM cards. Operating Humidity ~ % Relative Humidity, non-condensing (refer to IEC --3) Storage Temperature - ~ C (-3 ~ F) PCI-0A -port RS-3 PCI COMM Card (30cm DB3 to DB cable included) PCI-0A/ -port RS-3 PCI COMM Card (30cm DB3 to DB cable included) PCI-0B -port RS-3 PCI COMM Card w/surge Protection (30cm DB3 to DB cable included) PCI-0B/ -port RS-3 PCI COMM Card w/surge Protection (30cm DB3 to DB cable included) PCI-0CU -port RS-3 Universal PCI COMM Card w/isolation & Surge Protection (30cm DB3 to DB cable included) PCI-0CU/ -port RS-3 Universal PCI COMM Card w/isolation & Surge Protection (30cm DB3 to DB cable included) Industrial Communication

PCI-U NEW Bus Interface PCI bus specification. compliant IRQ All ports use the same IRQ assigned by PCI Plug & Play Data Bits,,, Stop Bits,., None, even, odd Communication PCI Controller 0 bps ~. kbps Data Signals TxD, RxD, RTS, CTS (for RS-/) Surge Protection,00 V DC ESD Protection kv Isolation Protection,000 V DC Power Consumption 00 ma @ V Dimensions x 00 mm (.3" x 3.") Operating Temperature 0 ~ C (refer to IEC --, ), (3 ~ F) Operating Humidity ~ % Relative Humidity, non-condensing (refer to IEC --3) Storage Temperature - ~ C (-3 ~ F) -port RS-/ Universal PCI Communication Card, w/ Isolation & Surge Protection PCI bus Specification. compliant s up to. kbps -port RS-/ PCI UARTs with -byte FIFOs standard I/O address automatically assigned by PCI Plug & Play OS supported: Windows /ME/000/XP, Linux Interrupt status register for increased performance Space reserved for termination resistors Automatic RS- data flow control Powerful and easy to use utility (ICOM Tools) Universal PCI,00 V DC Surge Protection,000 V DC Isolation Protection PCI-U is a -port RS-/ PCI communication card that is compatible with the PCI. bus specification. The PCI-U provides many functions such as four independent RS-/ ports with isolation protection, high transmission speed of. kbps, and surge protection. PCI-U also comes with high-performance PCI UARTs with a -byte FIFO to reduce CPU loading. These components make your system more stable and reliable. Thus, the PCI-U is especially suitable for multitasking environments. PCI-U has a universal PCI connector that is compatible with both newer 3.3 V signaling systems and the traditional V signaling systems. This gives high compatibility and allows usage in diverse systems. To improve the performance of the system, the PCI-U allows transmission rates up to. kbps, and to further increase reliability, the PCI-U offers surge protection technology, protecting your system from abrupt high voltages up to,00 V DC. Besides, Advantech also provides a convenient utility program, ICOM Tools, to help you test the PCI card s performance by analyzing the port status. The easy-to-use graphical user interface of ICOM Tools works like a PC-based data scope that lets you set trigger conditions to capture communication data and monitor a signal s status. ICOM Tools is applicable to all series of Advantech ICOM cards. PCI-U PCI-U/ -port RS-/ Universal PCI Communication Card, w/isolation & Surge Protection (30cm DB3 to DB cable included) -port RS-/ Universal PCI Communication Card, w/isolation & Surge Protection (30cm DB3 to DB cable included) Online Download www.advantech.com/products Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-

0- PCI- PCI-A/B PCI-U Bus Interface PCI bus specification. (PCI-A/B),. (PCI-U/CU) compliant IRQ All ports use the same IRQ assigned by PCI Plug & Play Data Bits,,, Stop Bits,., None, even, odd Communication PCI Controller 0 bps ~. kbps Data Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND (for RS-3) TxD, RxD, RTS, CTS (for RS-/) Surge Protection,00 V DC (PCI-B/U/CU only) ESD Protection kv Isolation Protection,00 V DC (PCI-CU only) Power Consumption Typical + V: 0 ma + V: 0 ma Max + V: 0 ma + V: 33 ma Power Requirement ± V Dimensions x 00 mm (.3 x 3. ) Operating Temperature 0~ C (refer to IEC --, ), (3 ~ F) -port RS-3// PCI Communication Card PCI bus specification.(pci-a/b),. (PCI-U/CU) compliant s up to. kbps -port RS-3// PCI UARTs with -byte FIFOs standard I/O address automatically assigned by PCI Plug & Play OS supported: Windows /ME/000/XP, Linux Interrupt status register for increased performance Space reserved for termination resistors Automatic RS- data flow control Powerful and easy to use utility (ICOM Tools) Universal PCI (PCI-U/CU),00 V DC Surge Protection (PCI-B/U/CU),00 V DC Isolation Protection (PCI-CU only) PCI- is a -port RS-3// PCI communication card that is compatible with the PCI./. bus specification and offer transmission rates up to. kbps. PCI- comes with high-performance PCI UARTs with a -byte FIFO to reduce CPU load. These components make your system more stable and reliable. Thus, the PCI- is especially suitable for multitasking environments. PCI-B, PCI-U and PCI-CU provide four optional surge protected RS3// ports and also offer four independent RS-3// ports. PCI-U and PCI-CU have universal PCI connectors that are compatible with both newer 3.3 V signaling systems and the traditional V signaling system. This gives highly-compatibility and allows usage in diverse systems. To further increase reliability, PCI-B, PCI-U and PCI-CU offers surge protection for high voltages up to,00 V DC. Meanwhile, PCI-CU provides,00 V DC isolation to protect your PC and equipment against damages from ground loops in harsh environments. Advantech also provides a convenient utility program called ICOM Tools to help test the PCI card performance by analyzing the port status. The menu commands and toolbar buttons of ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitor the signal status. ICOM Tools is applicable to all series of Advantech ICOM cards. Operating Humidity ~ % Relative Humidity, non-condensing (refer to IEC --3) Storage Temperature - ~ C (-3 ~ F) PCI-A -port RS-3// PCI COMM Card (30cm DB3 to DB cable included) PCI-A/ -port RS-3// PCI COMM Card (30cm DB3 to DB cable included) PCI-B -port RS-3// PCI COMM Card w/surge Protection (30cm DB3 to DB cable included) PCI-B/ -port RS-3// PCI COMM Card w/surge Protection (30cm DB3 to DB cable included) PCI-U -port RS-3// Universal PCI COMM Card w/surge Protection (30cm DB3 to DB cable included) PCI-U/ -port RS-3// Universal PCI COMM Card w/ Surge Protection (30cm DB3 to DB cable included) PCI-CU -port RS-3// Universal PCI COMM Card w/isolation & Surge Protection (30cm DB3 to DB cable included) PCI-CU/ -port RS-3// Universal PCI COMM Card w/isolation & Surge Protection (30cm DB3 to DB cable included) Industrial Communication

PCI-0A PCI-0B PCI-0U PCI-0A/B PCI-0U Bus Interface PCI bus spec..,. (0U only) compliant All ports use the same IRQ assigned by PCI Plug & Play Data Bits,,, Stop Bits,., None, even, odd Communication PCI+C Controller 0 bps ~. kbps Data Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND (for RS-3) Surge Protection 3000 V DC (PCI-0B) 00 V DC (PCI-0U) ESD Protection kv Power Consumption Typical + V: 0 ma + V: 0 ma Max + V: 0 ma + V: 0 ma Power Requirement ± V Dimensions x 00 mm (.3" x 3.") Operating Temperature 0 ~ C (refer to IEC --,) (3 ~ F) Operation Humidity ~ % Relative Humidity, non-condensing (refer to IEC --3) Storage Temperature - ~ C (-3 ~ F) -port RS-3 PCI Com mu ni ca tion Card -port RS-3 PCI Com mu ni ca tion Card, with Surge Pro tec tion -port RS-3 Universal PCI Com mu ni ca tion Card, with Surge Pro tec tion PCI bus specification.,. (0U only) compliant s up to. kbps -port RS-3 I/O address automatically assigned by PCI Plug & Play OS supported: Windows /ME/000/XP, Linux Interrupt status register for increased performance Space reserved for termination resistors Powerful and easy-to use utility (ICOM Tools) Universal PCI (PCI-0U) PCI-0 is an -port RS-3 PCI communication card that is compatible with the PCI. bus specification. The card provides eight optional surge protected RS-3 ports, and has many functions such as high transmission speed of. kbps, eight independent RS-3 ports and also comes with high-performance PCI UARTs with -byte FIFO and a C UART to reduce CPU load. Thus, the PCI-0 is especially suitable for making your system reliable in multitasking environments. PCI-0U has an universal PCI connector that is compatible with both 3.3 V signaling and V signaling. This means that PCI-0U can not only be used in traditional systems with V signaling but also newer systems with 3.3 V signaling. To further increase reliability, PCI-0B and PCI-0U offer surge protection technology, protecting your system from abrupt high voltages of up to 3,000 V DC. Advantech also provides a convenient utility program called ICOM Tools, to help you test the PCI card s performance by analyzing the port status. ICOM Tools is easy to use with its menu commands and toolbar buttons, and acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitor the signal status. ICOM Tools is applicable to all series of Advantech ICOM cards. PCI-0A PCI-0B PCI-0U OptC OptH -port RS-3 PCI COMM Card -port RS-3 PCI COMM Card, w/surge protection -port RS-3 universal PCI COMM card w/surqe protection -port RS-3 cable with male DB to DB connector (m) -port RS-3 cable with male DB to DB connector (m) Online Download www.advantech.com/products Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-

0-0 PCI-CU NEW Bus Interface PCI bus specification. compliant IRQ All ports use the same IRQ assigned by PCI Plug & Play Data Bits,,, Stop Bits,., None, even, odd Communication PCI Controller 0 bps ~. kbps Data Signals TxD, RxD, RTS, CTS (for RS-/) Surge Protection,00 V DC ESD Protection kv Isolation Protection,00 V DC Power Consumption 00 ma @ V Dimensions x 00 mm (.3 x 3. ) Operating Temperature 0~ C (refer to IEC --, ), (3~ F) Operating Humidity ~ % Relative Humidity, non-condensing (refer to IEC --3) Storage Temperature - ~ C (-3 ~ F) -port RS-/ Universal PCI Communication Card, w/isolation & Surge Protection PCI Specification. compliant s up to. kbps -port RS-/ PCI UARTs with -byte FIFOs standard I/O address automatically assigned by PCI Plug & Play OS supported: Windows /ME/000/XP Interrupt status register for increased performance Space reserved for termination resistors Automatic RS- data flow control Powerful and easy to use utility (ICOM Tools) Universal PCI,00 V DC Surge Protection,00 V DC Isolation Protection PCI-CU is an -port RS-/ PCI communication card that is compatible with the PCI. bus specification. PCI-CU provides many functions such as four independent RS-/ ports with isolation protection, high transmission speed of. kbps, surge protection and comes with high-performance PCI UARTs with a -byte FIFO to reduce CPU load. These components make your system more stable and reliable. Thus, the PCI-CU is especially suitable for multitasking environments. PCI-CU has a universal PCI connector that is compatible with both newer 3.3 V signaling systems and the traditional V signaling system. This gives high-compatibility and allows usage in diverse systems. To further increase reliability, the PCI-CU offers surge protection from high voltages up to,00 V DC and,00 V DC isolation to protect your PC and equipment against damages from ground loops in harsh environments. Advantech provides a convenient utility program called ICOM Tools to help test the PCI card s performance by analyzing the port status. The menu commands and toolbar buttons of ICOM Tools acts as a PC-based data scope that lets you set a trigger condition captures the communication data and monitors the signal status. ICOM Tools is applicable to all series of Advantech ICOM cards. Pin Assignments PCI-CU -port RS-/ Universal PCI COMM card w/isolation and Surge Protection (m DB to DB cable included) Industrial Communication

PCI-0UP PCI-0UP PCI-0UP PCI-0UP Bus Interface PCI bus spec.. compliant All ports use the same IRQ assigned by PCI Plug & Play Data Bits,,, Stop Bits,., None, even, odd Communication PCI (PCI-0UP) Controller PCI (PCI-0UP) 0 bps ~. kbps Data Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI (for RS-3) Tx+, Tx-, Rx+, Rx-, RTS+, RTS-, CTS+, CTS-, GND ( for RS-) Data+, Data-, GND (for RS-) Surge Protection,00 V DC ESD Protection kv Isolation Protection,00 V DC (PCI-0UP) Power Consumption V @ 300 ma (MAX) Power Requirement V Dimensions Low profile PCI MD (. x. mm (. x. )) Operating Temperature 0 ~ C (refer to IEC --, ) (3 ~ F) Operating Humidity ~ % Relative Humidity, non-condensing (refer to IEC --3) Storage Temperature - ~ C (-3 ~ F) -port RS-/ Low-Profile PCI Communication Card, w/isolation and Surge Protection -port RS-3 Low-Profile PCI Communication Card, w/surge Protection PCI bus specification. compliant s up to. kbps -port RS-3(PCI-0UP); -port RS-/ (PCI-0UP) I/O address automatically assigned by PCI Plug & Play OS support: Windows /ME/000/XP, Linux (0UP only),00v DC Surge protection,00v DC Isolation protection for RS-/ (PCI0UP) Interrupt status register for increased performance Space reserved for termination resistors Automatic RS- data flow control Powerful and easy-to-use utility (ICOM Tools) Universal PCI Low-profile PCI PCI-0UP and PCI-0UP are port RS-3// PCI communication cards that are compatible with the PCI. bus specification for universal connectivity and low profile PCI cards. PCI-0UP provides two independent RS-3 ports, while PCI-0UP has two RS-/ ports. To improve system performance, both cards allow transmission rates up to. kbps. To increase reliability, the cards offer surge protection, protecting your system from abrupt high voltages up to,00 V DC. High-performance PCI UARTs with -byte FIFO, reduces the CPU load, making the cards especially suitable for multitasking environments. PCI-0UP and PCI-0UP follows the Low Profile PCI MD standard. This standard has the same protocol and electronic definition as standard PCI, but the Low Profile PCI standard is smaller. Thus, PCI-0UP and PCI-0UP are suitable for embedded systems, and size-constrained environments. Moreover, both cards are equipped with an universal PCI connector, which allows support for traditional systems with V signaling or newer systems with 3.3 V signaling. Advantech also provides a convenient utility called ICOM Tools, to help test the PCI card s performance by analyzing the port status. The menu commands and toolbar buttons of ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communication data and monitor the signal status. ICOM Tools can be used with all series of Advantech ICOM cards. PCI-0UP PCI-0UP -port RS-/ Low-Profile Universal PCI COMM Card, w/isolation and Surge Protection -port RS-3 Low-Profile Universal PCI COMM Card, w/surge Protection Online Download www.advantech.com/products Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-

0- PCI-0UP Bus Interface PCI bus spec.. compliant All ports use the same IRQ assigned by PCI Plug & Play Data Bits,,, Stop Bits,., None, even, odd Communication PCI Controller 0 bps ~. kbps Data Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI Surge Protection 00 V DC ESD Protection kv Power Consumption V @ 00 ma (Max.) Dimensions Low profile PCI MD (. x. mm (. x. )) Operating Temperature 0 ~ C (refer to IEC --,) (3 ~ F) Operating Humidity ~ % Relative Humidity, non-condensing (refer to IEC --3) Storage Temperature - ~ C (-3 ~ F) -Port RS-3 Low-Profile Universal PCI Communication Card, w/surge Protection PCI bus specification. compliant s up to. kbps Four independent RS-3 serial ports I/O address automatically assigned by PCI Plug & Play OS supported: Windows /ME/000/XP, Linux 00 V DC Surge protection Interrupt status register for increased performance Powerful and easy-to-use utility (ICOM Tools) Universal PCI Low Profile PCI The PCI-0UP is a -port RS-3 PCI communication card, that is compatible with the PCI. bus specification for universal connectivity and low profile PCI cards. PCI-0UP provides four independent RS-3 ports. To improve the performance of the system, the PCI-0UP provides transmission rates up to. kbps. To increase reliability, The PCI- 0UP offers surge protection technology, protecting your system from abrupt high voltage up to 00 V DC. The PCI-0UP also comes with high-performance PCI UARTs with -byte FIFO to reduce CPU load. These components allow more stability and reliability. Therefore, PCI-0UP is especially suitable for multitasking environments. PCI-0UP follows the Low Profile PCI MD standard. It has the same protocol and electronic definition as standard PCI, but the Low profile PCI card is smaller. Thus, PCI-0UP is suitable for embedded systems, or any size-constrained environment. Moreover, PCI-0UP has an universal PCI connector, which allows support in traditional systems with V signaling or newer systems with 3.3 V signaling. Advantech also provides a convenient utility program called ICOM Tools, to help you test the PCI card's performance by analyzing the port status. The menu commands and toolbar buttons are easy to use. ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communication data and monitor the signal status. ICOM Tools can be used with all series of Advantech ICOM cards. PCI-0UP -Port RS-3 Low-Profile Universal PCI COMM Card, w/surge protection Industrial Communication

PCL-0 PCL- Board PCL-0 PCL- Ports Protocol RS-3, RS-/RS- or current-loop (PCL-0) RS-3 or current-loop (0 ma) (PCL-) I/O Address From 00H to 3FH IRQ 3,,,,,, 0,, or Data Bits,,, Stop Bits,., None, even and odd Power Isolation 00 V DC (PCL-) Signal Isolation 00 V DC (PCL-) Power Consumption PCL-0: + V @ 0 ma max., ± V @ 0 ma max. PCL-: + V @ 300 ma (typical), + V @. A max. s DB male and DB male (PCL-0 only) connectors Operating Temperature 0 ~ 0 C (3 ~ F) Dimensions x 00 mm (.3" x 3.") Shipping Weight 0. kg (.3 lb) RS-3/RS-/RS-/Current-loop COMM Cards Isolated Dual-port RS-3/Current-loop COMM Cards RS-3, RS-, RS- or current-loop interface C0 UART with -byte FIFO Transmission speeds up to kbps Flexible I/O address and IRQ selection IRQ: 3,,,,,, 0,, or Complete RS-3 modem control signals Supports -wire or -wire operation for RS-/ Automatic RS- data flow control Space reserved for termination resistors Supports COM, COM, COM3, or COM Supports Windows /000/XP, Linux Powerful and easy-to-use utility (ICOM Tools) The PCL-0 offers a versatile range of high speed interfacing options. You can switch its single port between the popular RS-3, long distance RS-, multi-drop RS-, or noise-resistant current-loop. The card's C0 UART has an on-chip -byte FIFO buffer for faster and more reliable communication, especially under Windows. The PCL- provides two isolated RS-3 or current-loop serial ports. You can configure each port individually to RS-3 or current-loop using on-board jumpers. The card has two C0 UARTs with on-chip -byte FIFO buffers. The UARTs buffer data into -byte packets before sending it to the bus. This drastically reduces CPU load and avoids data loss when the system is busy and cannot process the interrupt quickly. These FIFO buffers make the PCL- especially suitable for high speed serial I/O under Windows. Onboard optical isolators protect your PC and equipment against damage from ground loops, increasing system reliability in harsh environments. Pin As sign ments PCL-0 PCL- Or der ing In for ma tion PCL-0 PCL- RS-3/RS-/RS-/current-loop serial interface card Iso lat ed dual-port RS-3/current-loop interface card. Online Download www.advantech.com/products TX RX RTS CTS DSR GND DCD CL TX+ CL TX- DCD RX TX DTR GND 3 0 3 0 3 DSR RTS CTS RI CL RX+ DTR RI TX+/DATA+ TX+ RX+ TX- RX- RX+ GND 3 3 CL RX- TX-/DATA- RX- RTS- RTS+ CTS+ CTS- Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-3

0- PCL-3 PCL- PCL-B PCL-S PCL-3B PCL-3S PCL-3 PCL- -port RS-/ communication card with isolation protection -port RS-/ communication card with isolation and surge protection -port RS-/ communication card -port RS-/ communication card with surge protection Applications PLC monitoring and control Serial communication interface for harsh environments Data entry terminals -port High-speed RS-/ COMM Cards -port High-speed RS-/ COMM Cards w/ Isolation Two independent RS-/ serial ports Provides 3000 V DC isolation (PCL-B/S) Provides 00 V DC surge protection (PCL-3S/S) C0 UARTs with on-chip -byte FIFO Transmission speeds up to. kbps I/O address and interrupt selectable Wide IRQ selection: 3,,,,,, 0,, or Supports wire or wire operation Supports Tx, Rx, RTS, and CTS signals Automatic RS- data flow control or RTS control Termination resistors jumper enable/disable Space reserved for optional surge protection on data lines (PCL-3B/B) Supports standard DOS COM, COM, COM3, and COM Supports Windows /000/XP, Linux Powerful and easy-to-use utility (ICOM Tools) PCL-3 and PCL- provide two RS-/ serial ports. Each port utilizes a C0 UART with an on-chip -byte FIFO buffer for reliable, high-speed serial I/O. The UART buffer divides data into -byte packets before sending them onto the bus. This drastically reduces CPU load and avoids data loss due to failure to respond to the interrupt request in time. The UART is especially useful for high speed serial I/O under Windows. The PCL-B/S card differs from the PCL-3B/3S card in that the former uses on-board optical isolators to protect your PC and equipment against damages from ground loops, increasing system reliability in harsh environments. To further increase reliability, PCL-3S and PCL-S offers surge protection, protecting your system from abrupt high voltage surges (up to 00 V DC ) such as those caused by lightning. Pin Assignments Remote data acquisition and control systems Instrument controller and distributed control systems Industrial Communication TX+ RX+ GND RS- RTS+ CTS+ DATA- RTS- CTS- Ports UART x C0 with -byte FIFO Signal Support TxD+, TxD-, RxD+, RxD-, CTS+, CTS-, RTS+ and RTS- I/O Address From 00H to 3FH IRQ 3,,,,,, 0,, or Isolation Voltage 3000 V DC (PCL-B/S) Surge Protection 00 V DC (PCL-3S/S) Power Consumption + V @ 00 ma typical, 0 ma max. s Dual DB male connectors Operating Temperature 0 ~ C (3 ~ F) Dimensions x 00 mm (.3" x 3.") Shipping Weight 0. kg (.3 lb) TX- RX- DATA+ GND RS-

PCL-+ Ports serial ports Protocol Selection RS-3// (jumper selectable) UART x C0 -byte FIFO 0 bps ~. kbps Base I/O Address From 000H to 3FH Selection Interrupt Status From 000H to 3F0H Address Selection IRQ Selection 3,,,,,, 0,, or Data Bits,,, Stop Bits,., None, even and odd Power Consumption + V @ 00 ma typical,. A max. ± V @ 0 ma typical, 0 ma max. Operating Temperature 0 ~ 0 C (3 ~ F) Cables 30cm male DB3 to four male DB cables Dimensions x 00 mm (.3" x 3.") Weight. kg (. lbs) (including cable) Four independent RS-3// serial ports s up to. kbps Pin Assignments PCL-+ PCL-+/ OptA -port RS-3// COMM Card Interrupts (jumper selectable): 3,,,,,, 0,, or Onboard interrupt status register for greater throughput Automatic data flow control in RS- mode RS- or RS- modes jumper selectable Space reserved for optional surge protection on all port lines (in RS-/ modes) Space reserved for termination resistors Compatible with ARCNET -port cards supporting SCO UNIX/XENIX Supports Windows /000/XP, Linux Powerful and easy-to-use utility (ICOM Tools) PCL-+ is a four-port serial communication interface card. The main feature of this card is that each port can be configured individually to RS-3, RS- or RS- using onboard jumpers. The card has C0 UARTs and improved interrupt handling for reliable operation at transmission speeds of up to. kbps. PCL-+ supports two operating modes: standard mode and enhanced mode. In standard mode each of the four ports can be set up as either the address or the IRQ channel individually. In enhanced mode all four ports can be set to share the same IRQ. When an on-board interrupt occurs, the interrupt status register indicates which port has generated it. The shared interrupt can be set to the most common (extended) AT interrupts. This simplifies programming, speeds up interrupt processing, and frees up interrupts for other devices. The RS- mode automatically senses the direction of incoming data and switches its transmission direction accordingly. This feature makes your network look and act just like an RS-3 network. Application software written for half duplex RS-3 can be used without modification. Moreover, you can simply and quickly build an RS- network with just two wires. -port serial interface card.(30cm DB3 to DB cable included) -port serial interface card. (30cm DB3 to DB cable included) -port RS-3// connector cable with male DB connector (30cm length) Online Download www.advantech.com/products RS-3 RS- / RS- Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-

0- PCL- Ports UART x C0 with -byte FIFO 0 bps ~. kbps None, even and odd Signal Support TxD+, TxD-, RxD+, RxD-, CTS+, CTS-, RTS+ and RTS- I/O Address From 00H to 3FH IRQ 3,,,,,, 0,, or Isolation Voltage 000 V DC Surge Protection 000 V DC (PCL-B only) Power Consumption + V @ 0 ma typical,. A max. Cables 30cm male DB3 to four male DB (DTE) Operating Temperature 0 ~ 0 C (3 ~ 0 F) Storage Temperature - ~ 0 C (-3 ~ F) Dimensions x 00 mm (.3" x 3.") Pin Assignments -port High-speed RS-/ Communication Card Four independent RS-/ serial ports Transmission speeds up to. kbps Independent/shared IRQ settings between each of the serial ports Wide IRQ selection: 3,,,,,, 0,, or Supports standard DOS COM, COM, COM3, and COM Provides 000 V DC isolation Provides 000 V DC surge protection (PCL-B only) Space reserved for termination resistors Supports wire or wire operation Supports Tx, Rx, RTS, and CTS signals Automatic RS- data flow control or RTS control Supports Windows /000/XP, Linux Powerful and easy-to-use utility (ICOM Tools) PCL- provides four independent RS-/ serial ports on a card. Each port has a C0 UART with an on-chip -byte FIFO buffer for reliable, high-speed serial I/O. The UART buffers data into -byte packets before sending it to the bus. This drastically reduces the CPU load and avoids data loss when the system is busy and cannot process the interrupt quickly. The UART is especially useful for high speed serial I/O under Windows. PCL- utilize on-board optical isolators to protect your PC and equipment against damage from ground loops, increasing system reliability in harsh environments. To further increase reliability, PCL-B include surge protection technology, protecting your system from abrupt high voltage surges (up to 000 V DC ) such as those caused by lightning during thunderstorms. The RS- mode automatically senses the direction of incoming data and switches its transmission direction accordingly. This feature makes your network look and act just like an RS-3 network. Application software written for half duplex RS-3 can be used without modification. Moreover, you can simply and quickly build an RS- network with just two wires. Industrial Communication TX+ RX+ GND RTS+ CTS+ DATA- RTS- CTS- TX- RX- DATA+ GND RS- RS- PCL-A PCL-B -port RS-/ interface card w/isolation protection (30cm DB3 to DB cable included) -port RS-/ interface card w/isolation and surge protection (30cm DB3 to DB cable included)

PCL- Ports serial ports I/O Address Range From 00H to 3FH IRQ 3,,,,,, 0,,, Data Bits,,, Stop Bits,., None, even and odd UARTs x C (PCL-A/B/L) x C (PCL-+) 0 ~. kbps (PCL-A) 0 ~ 30. kbps (PCL-B/+) 0 ~. kbps (PCL-L) Data Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND Surge Protection 3000 V DC (PCL-B/+) Power Requirements + V @ 0 ma typical, 00 ma max. ± V @ 0 ma typical, 0 ma max. Dimensions x 00 mm (.3" x 3.") Operating Temperature 0 ~ 0 C (3 ~ 0 F) Storage Temperature - ~ 0 C (-3 ~ F) PCL-A PCL-A/ PCL-B PCL-B/ -port high-speed RS-3 interface card (30cm DB3 to DB cable included) -port high-speed RS-3 interface card (30cm DB3 to DB cable included) -port high-speed RS-3 interface card w/ surge protection (30cm DB3 to DB cable included) -port high-speed RS-3 interface card w/ surge protection (30cm DB3 to DB cable included) Four independent RS-3 serial ports Transmission speeds up to. kbps (PCL-A) Independent I/O addresses, independent/shared IRQ settings for each of serial ports Wide IRQ selection: 3,,,,,, 0,, or Supports standard DOS COM, COM, COM3, COM (PCL-A/B/+) Supports surge protection: 3000 V DC (PCL-B/+) LED indicators on each port indicate data flow Onboard interrupt status register for greater throughput Complete RS-3 modem-control signals Supports Windows /000/XP, Linux Powerful and easy-to-use utility (ICOM Tools) The PCL- cards provide four individually configurable RS-3 serial communication ports. PCL-A, PCL-B and PCL-L have a C UART which makes serial I/O more reliable, while the higher performance PCL-+ has a C UART. By buffering data into -byte packets before putting it on the bus, UARTs drastically reduce the CPU load. This makes the PCL-+ especially suitable for high speed serial I/O applications under multitasking environments. PCL- cards support two operating modes: standard mode and enhanced mode. In enhanced mode, the address for all four ports can be set automatically. PCL- cards also support either shared IRQ or independent IRQ functions. When an on-board interrupt occurs, the interrupt status register (vector address) indicates which port generated it. The shared interrupt can be set to most common (extended) AT interrupts. This simplifies programming, speeds up interrupt processing and frees up interrupts for other devices. PCL-+ PCL-+/ PCL-L PCL-L/ OptA Pin Assignments -port RS-3 Communication Card -port high-speed RS-3 interface card w/ surge protection and C UART (30cm DB3 to DB cable included) -port high-speed RS-3 interface card with surge protection and C UART (30cm DB3 to DB cable included) -port RS-3 interface card (30cm DB3 to DB cable included) -port RS-3 interface card (30cm DB3 to DB cable included) -port RS-3// cable with male DB3 to DB connector (30 cm length) Online Download www.advantech.com/products Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-

0- PCL- Ports I/O Address Range From 000H to 3FFH IRQ 3,,,,,, 0,,, Data Bits,,, Stop Bits,., None, even, odd UARTs C (PCL-A/B) 0 bps ~. kbps Data Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Surge Protection 3000 V DC (PCL-B only) Power Consumption + V @ 0 ma typical, 0 ma max. ± V @ 0 ma typical, 0 ma max. Dimensions 00 mm (.3 x 3. ) Operating Temperature 0 ~ 0 C (3 ~ 0 F) Storage Temperature - ~ 0 C (-3 ~ F) PCL-A PCL-B OPTA OPTB OptC OptH -port High-speed RS-3 Communication Cards Eight independent RS-3 serial ports Transmission speed up to. kbps Independent I/O addresses, shared IRQ settings for each of serial ports Wide IRQ selection: 3,,,,,, 0,,, Supports surge protection: 3000 V DC (PCL-B only) Supports Windows /000/XP, Linux Powerful and easy-to-use utility (ICOM Tools) PCL- interface cards provide eight RS-3 serial communication ports, where each port can be configured individually using onboard jumpers. PCL-A and PCL-B each have two C UARTs, which make serial I/O more reliable. The PCL- cards support automatic addressing for all eight ports. All channels share the same interrupt (IRQ), and an interrupt status register can be used to determine the interrupt source. When an onboard interrupt occurs, the interrupt status register (vector address) indicates which port generated it. The shared interrupt can be set to most common (extended) AT interrupts. This simplifies programming, speeds up interrupt processing and frees up interrupts for other devices. -port high-speed RS-3 interface card (must choose Opt-X) -port high-speed RS-3 interface card w/surge protection (must choose Opt-X) -port RS-3 (DCE) connection box with female DB connector -port RS-3 (DTE) connection box with male DB connector -port RS-3 cable with male DB- to DB connector (m) -port RS-3 cable with male DB- to DB connector (m) Industrial Communication

PCM-30 PCM-3 PCM-3 Channel RS-3,,or Channel RS-, or RS- Baud Rate 0 ~,00 bps Character Length,,, or bits Even, odd, or none Stop Bit,., or Interrupt Level IRQ 3,,,,, I/O Connectors Dual male DB Power Consumption + V @ 00 ma typical ± V @ 0 ma max Isolation,000 V DC Operating Temperature 0 ~ C (3 ~ F) Storage Temperature -0~ C (-0~ F) Operating Humidity 0 ~ 0 % relative humidity, noncondensing Channel and RS-, or RS- Baud Rate 0 ~,00 bps Character Length,,,or bits Even, odd, or none Stop Bit,., or Interrupt Level IRQ 3,,,,,, 0,, or I/O Connectors Dual male DB Power Consumption + V @ 00 ma typical ± V @ 0 ma max LED Red LED for TX Green LED for RX Operating Temperature 0 ~ C (3 ~ F) Storage Temperature -0~ C (-0~ F) Operating Humidity 0 ~ 0 % relative humidity, noncondensing Isolated RS-3// Module -port RS-/ Module PCM-30 PCM-3 PCM-3 High speed transmission rate Automatic RS- data flow control Jumper selectable interrupt level Supports Windows /000/XP Supports WinCE 3.0 Powerful and easy-to-use utility (ICOM Tools) PCM-30-B Isolated RS- 3// module Long distance communication Automatic RS- data flow control Jumper selectable interrupt level Supports Windows /000/XP Supports WinCE 3.0 Powerful and easy-to-use utility (ICOM Tools) PCM-3-A Dual port RS-/ module -port RS-/ High-Speed Module Automatic RS- data flow control Shared IRQ settings for each ports LED indicators: TX, RX Standard PC ports: COM, COM, COM3, COM compatible.supports Windows /000/XP Powerful and easy-to-use utility (ICOM Tools) Number of Ports I/O Address 0 x 000 ~ 0 x 3F IRQ 3,,,,,, 0,,, Data Bits,,, Stop Bits,., None, even, odd 0 bps ~. kbps s male DB RS- Signal Support TxD+, TxD-, RxD+, RxD-, CTS+, CTS-, RTS+ and RTS- RS- Signal Support DATA+, DATA-, CTS+, CTS- Surge Protection 000 V DC Built-in Termination 0 Ω Resistor Power Consumption + V @ 0 ma Operating Temperature 0 ~ C (3 ~ F) Storage Temperature -0~ C (-0~ F) Operation Humidity 0 ~ 0 % relative humidity, noncondensing PCM-3-A -port RS-/ High-Speed module Online Download www.advantech.com/products Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-

PCM-3 PCM-30/3 PCM-3 Automatic RS- data flow control Shared IRQ settings for each ports LED indicators: TX, RX Supports Windows /000/XP Powerful and easy-to-use utility (ICOM Tools) Number of Ports I/O Address 0 x 000 ~ 0 x 3F IRQ 3,,,,,, 0,,, Data Bits,,, Stop Bits,., None, even and odd 0 bps ~. kbps s Eight male DB RS- Signal Support TxD+, TxD-, RxD+, RxD-, CTS+, CTS-, RTS+ and RTS- RS- Signal Support DATA+, DATA-, CTS+, CTS- Surge Protection 000 V DC Built-in Termination 0 Ω Resistor Power Consumption + V @ 0 ma Operating Temperature 0 ~ C (IEC---, ) (3 ~ F) Storage Temperature - ~ 0 C (-3 ~ F) Operating Humidity 0 ~ 0% relative humidity, non-condensing PCM-3-A -port RS-/ High-Speed module PCM-30/3 -port RS-/ High-Speed Module -port RS-3 High-Speed Module Transmission speeds up to 0 kbps (PCM-3) Shared IRQ settings for each of RS-3 ports (PCM-3) Standard PC ports: COM, COM, COM3, COM compatible Supports Windows /000/XP Supports WinCE 3.0 Powerful and easy-to-use utility (ICOM Tools) Number of Ports I/O Address 0 x 000 ~ 0 x 03F IRQ 3,,,,,, 0,,, Data Bits,,, Stop Bits,., None, even and odd 0 bps ~ 0.3 kbps (PCM-3) 0 bps ~. kbps (PCM-30) s Four DB male Data Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND Power Consumption + V @ 00 ma (Typical); + V @ 0 ma (Max.) Operating Temperature 0 ~ C (IEC---, ) (3 ~ F) Storage Temperature - ~ 0 C (-3 ~ F) Operating Humidity 0 ~ 0 % relative humidity, non-condensing PCM-30-A PCM-3-A -port RS-3 module -port RS-3 High-Speed module 0-0 Industrial Communication

PCM-30 PCM-3 PCM-30 Automatically detects -bit or -bit AUI connector supports external MAUs On-board 3 Kbyte buffer for multi-packages I/O Address 00, 0, 0, 0, 0, A0, C0, 300, 30, 30, 30, 3A0 Interrupt Level IRQ 3,,,, 0,, or Boot ROM Address C0000, C000, D0000, or D000H Data Bus -bit, -bit, or auto-sending -bit PC/0 stackthrough connector RJ- connector for 0Base-T, -pin insulation displacement connector for AU Standard IEEE 0.3 0 Mbps CSMA/CD 0Base-T Transceiver Power Consumption + V @ 00 ma max PCM-30-C PCM-3-A Jumperless Ethernet module 0Base- transceiver module PCM-3 Supports IEEE 0.3u Ethernet standard Supports IEEE 0.3x Full Duplex Flow Control Supports 0/00Base-T Ethernet Supports Wake-On-LAN function Provides modes of LED definitions Software Driver Support Windows //NT/000 driver Novell server driver Windows for workgroups driver Novell ODI client driver Novell ODI driver for client3 Linux driver General Jumperless Ethernet Module PC/0-Plus Ethernet Module Power + V @ 0 ma Operating Temperature 0 ~ 0 C Storage Temperature - ~ 0 C Humidity 0 ~ 0% (operating) PCM-3-A PC/0-Plus Ethernet Module Online Download www.advantech.com/products Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-

0- PCI-U NEW Number of Ports Processor RISC, TI TMS30C03- Dual-ported RAM KB SRAM KB UART RISC-based CD0 Interrupt, 3,,,, 0,, or Maximum Ports 3 in One System Operating Temperature 0 ~ C (3 ~ 3 F) Power Consumption + V @ ma, + V @ 0 ma, - V @ 0 ma Weight 0. kg (. lb) PCI-U OPTA OPTB OPTC OPTH -port Intelligent RS-3/ Universal PCI Communication Card RISC Processor (TMS 30) KB dual-port RAM Transmission speed up to. kbps with eight ports on-line Complete RS-3 modem control signals Maps to just KB of system memory. Choose one of six addresses from C000 to DC000. Many IRQ options:, 3,,,, 0,, or Easy-to-use menu driven installation program LEDs on connection box let you monitor the TxD/RxD status of any port Links to peripherals up to 00 m (000 ft) from controller (RS-) Surge protection: 00 V ESD, 000 V EFT (Optional) Universal PCI The intelligent PCI-U -port RS-3 or RS- interface card was designed for lab and industrial applications where a PC needs to communicate with terminals, modems, or other instruments. RS- applications use the optional Opt-F/Z -port RS-3 to RS- converter, shown on the following page. You can install up to four PCI-U cards for a total of 3 ports in any PCI bus-based PC. The PCI-U card has an onboard RISC processor that takes over the processing load from the host PC. When you are transferring large amounts of data from multiple ports, servicing the interrupts alone consumes a large percentage of the capacity of your computer's CPU. The PCI-U serves as a high speed, dedicated interrupt processor. Its CPU directly controls the board's CD0 RISC-based UART, guaranteeing. kbps performance of over eight high speed data ports. The PCI-U is virtually a self contained computer. It contains KB of dual-port RAM which you can use to store and run programs. The dual-port RAM maps into the host system's address space to give you the fastest possible data transfers between the PCI-U and PC memory. When the PCI-U initializes, it downloads the driver software (which functions like a PC's BIOS) into its on-board SRAM. This improves performance and makes version upgrading easy. No hardware redundancy! -port Intelligent RS-3/ Universal PCI Commuication Card -port RS-3 (DCE) connection box with female DB connectors -port RS-3 (DTE) connection box with male DB connectors -port RS-3 connection cable with male DB connectors -port RS-3 cable with male DB to DB connector (m) Industrial Communication

PCL-+ Board Number of Ports Processor RISC, TI TMS30C03- Dual-ported RAM KB SRAM KB UART RISC-based CD0 Interrupt, 3,,,, 0,, or Maximum Ports in 3 One System Operating Temperature 0 ~ C (3 ~ 3 F) Power Consumption + V @ ma, + V @ 0 ma, - V @ 0 ma Weight 0. kg (. lb) RISC Processor (TMS 30) KB dual-port RAM -port Intelligent RS-3/ ISA Communication Card Transmission speed up to. kbps with eight ports on-line Complete RS-3 modem control signals Maps to just KB of system memory. Choose one of six addresses from C000 to DC000. Many IRQ options:, 3,,,, 0,, or Easy-to-use menu driven installation program LEDs on connection box let you monitor the TxD/RxD status of any port Links to peripherals up to 00 m (000 ft) from controller (RS-) Surge protection: 00 V ESD, 000 V EFT (Optional) The intelligent PCL-+ was designed as a -port RS-3 or RS- interface card for lab and industrial applications where a PC needs to communicate with terminals, modems, or other instruments. RS- applications use the optional Opt-F/Z -port RS-3 to RS- converter, shown on the following page. You can install up to four PCL-+ cards for a total of 3 ports in any AT/lSA bus-based PC. The PCL-+ card has an on-board RISC processor that takes over the communications load from the host PC. When you are processing large amounts of data from multiple ports, servicing the interrupts alone consumes a large percentage of the capacity of your computer's CPU. The PCL-+ serves as a high speed, dedicated interrupt processor. Its CPU directly controls the board's CD0 RISC-based UART, guaranteeing. kbps performance of over eight high-speed data ports. PCL-+ is virtually a self contained computer in its own right. It contains KB of dual-port RAM which you can use to store and run programs. The dual-port RAM maps into the host system's address space to give you the fastest possible data transfers between PCL-+ and the PC memory. When the PCL-+ initializes, it downloads the driver software (which functions like a PC's BIOS) into on-board SRAM. This improves performance and makes version upgrading easy, with no hardware redundancy. RS-3 Interface Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD and GND Mode Asynchronous full duplex Communication Speed 0 bps ~. kbps Data Bits,,, Stop Bits,., Even, odd or none PCL-+ OptA OpB 0ptC OptH -port Intelligent RS-3/ Card, with ISA bus -port RS-3 (DCE) connection box with female DB connectors -port RS-3 (DTE) connection box with male DB connectors -port RS-3 connection cable with male DB connectors -port RS-3 connector cable with male DB connector (m length) Online Download www.advantech.com/products Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-3

0- PCI-0U Bus Interface PCI bus spec.. compliant Port Protocol CAN.0 A/B CAN Controller SJA-000 CAN Transceiver C0 Signal Support CAN_H, CAN_L Mbps Isolation 000 V DC Power Consumption V @ 00 ma (Typical) s Two standard DB(M) connectors Board Dimension x 00 mm (.3 x 3. ) Operating Temperature 0 ~ C (refer to IEC --, ) (3 ~ F) Storage Temperature - ~ C (-3 ~ F) Operating Humidity ~ % Relative humidity, non-condensing (refer to IEC --3) -Port CAN Interface Universal PCI Communication Card w/ Isolation PCI bus specification. compliant Operates two separate CAN networks at the same time High speed transmission up to Mbps MHz CAN controller frequency Optical isolation protection of 000 V DC ensures system reliability I/O address automatically assigned by PCI PnP LED indicated transmit/receive status on each port Windows DLL library and examples included Universal PCI Supports Windows //000/XP driver and utility PCI-0U is a special purpose communication card that offers the connectivity of the Controller Area Network (CAN) to your PC. With its built-in CAN controllers, the PCI-0U provides bus arbitration and error detection with an automatic transmission repeat function. This drastically reduces the chance of data loss and ensures system reliability. The on-board CAN controllers are located at different positions in the memory, and you can run both CAN controllers independently at the same time. Besides, PCI-0U has a universal PCI connector, which is compatible with both new 3.3 V signaling systems and traditional V signaling systems. With high-compatibility, the PCI-0U can be used in diverse systems. Controller Area Network (CAN) The CAN is a serial bus system especially suitable for networking intelligent I/O devices as well as sensors and actuators within a machine or plant. Characterized by its multi-master protocol, real-time capability, error correction, high noise immunity, and the existence of many different silicon components, the CAN serial bus system, originally developed by Bosch for use in automobiles, is increasingly being used in industrial automation. Direct Memory Mapping Enables Direct Access to the CAN Controller The PCI-0U is assigned a memory address. This is the simplest method of integrating a board in a PC and provides the quickest access since the board is treated by the PC as being standard RAM. Optical Isolation Protection On-board optical isolators protect your PC and equipment against damage from ground loops, which increases system reliability in harsh environments. PCI-0U-A -Port CAN Interface Universal PCI Communication Card w/ Isolation Industrial Communication

PCL- PCM-30 PCL- Operates two separate CAN networks at the same time High speed transmission up to 00 kbps MHz CAN controller frequency Takes KB of address space, 0 base address adjustable in steps from C00H to EF00H Optical isolation protection of 000 V DC ensures system reliability Wide IRQ selection for each port: IRQ 3,,,,,, 0,,, LEDs indicate Transmit/Receive status on each port Direct memory mapping enables very fast access to the CAN controllers Windows DLL library and examples included Supports Windows //000/XP driver and utility Ports CAN Controller SJA-000 CAN Transceiver C0 Signal Support CAN_H, CAN_L Memory Segment From C00H to EF00H Base Address IRQ 3,,,,,, 0,, or Isolation Voltage 000 V DC Power Consumption + V @ 00 ma typical, 0 ma max. s Dual DB- male connectors Operating Temperature 0 ~ 0 C (3 ~ F) Dimensions x 00 mm (.3" x 3.") (PCL-) Shipping Weight 0. kg (.3 lb) PCL--A Dual-port Isolated CAN-bus Interface Card PCM-30 Dual-port Isolated CAN-bus Interface Card Dual-port Isolated CAN Interface Module Operates two separate CAN networks at the same time High speed transmission up to 00 kbps Direct memory mapping enables very fast access to the CAN controllers Windows DLL library and examples included Supports Windows //000/XP driver and utility Ports CAN Controller SJA-000 CAN Transceiver C0 Signal Support CAN_H, CAN_L Memory Segment From C00H to EFOOI Base Address IRQ 3,,,,,, 0,, or Isolation Voltage 000 V DC Power Consumption + V @ 00 ma s Two DB- male connectors (cable included) Operating Temperature 0 ~ C (3 ~ F) Dimensions 0 x mm (3." x 3.") PCM-30-A Dual-port Isolated CAN Interface Module Online Download www.advantech.com/products Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-

0- Fieldbus Communication Overview Today, the PC assumes a key position in automation technology. Together with a real-time operating system such as Windows NT, it creates an ideal hardware platform for control and visualization of process data. Fieldbus systems with remote input and output modules are used for the data transfer between the PC and the automation equipment. Advantech has launched a series of Fieldbus communication interface cards from Hilscher, a company with a field-proven record in industrial communication technology. We offer special interface PC cards, since PCs do not feature a direct link to the Fieldbus. These intelligent cards manage the entire data transfer so that only useful data are passed onto the user applications. The idea behind the Communication Interface - CIF, is to provide common access to the various Fieldbus systems available on the market. We provide a powerful, easy to handle and reliable solution at a low-cost. Thus, you can concentrate on your applications and do not need to reinvent the wheel when you re required to use a different Fieldbus system tomorrow. We place special value on ease of operation. This includes loadable Firmware, configuration data that remain even after a power failure, an online RS-3C diagnostic interface and LED status indicators. Naturally, each card supplied carries the CE mark. PC Cards in all Formats for the Fieldbus Standards We supply PC cards with PCI-bus or in the PC/0 and PC/0-Plus format for all leading Fieldbus systems. Careful component selection and focus of the necessary functions has resulted in a single-side surface mounted card with a low cost. Fieldbuses differ from each other in their physical interfaces and capacity spectrums. We don t use plug-in modules for adaptation. We provide a dedicated card for the Fieldbus system, sometimes different ones for Master or Slave functions. Only in this way can we guarantee you the best performance relationship with the highest degree of reliability. Fieldbus Universal PCI PC/0 PC/0-Plus CANopen-Slave CANopen-Master DeviceNet-Slave DeviceNet-Master PROFIBUS-DP-Slave PROFIBUS-DP/ FMS-Master -COM -DNM -PB -COS -COM -DNS -DNM -DPS -PB -COM -DNM System Configurator with an Uniform look and feel All cards are configured using the SyCon System Configurator. This software has been coded in C++ and executes under the Windows //ME and Windows NT/000/XP operating systems. Graphical input of the individual bus participants, clearly structured menu guidance and automatic computations of the bus parameters make the configuration a very simple exercise. By means of the function interface, other programs can exchange data with the configurator and access its database. The configurator can also be included in your own product as an OEM version. -PB Uniform and Easy-to-use application Interface The data exchange between the application and the communication interface takes place via a dual-port memory. This is a type of memory where read/write accesses are performed both from the application and from the interface side. A static data model is used for the dual-port memory. It is uniform for all cards and contains the process image. Commands and message-oriented data are exchanged using two mailboxes. The entire handshake is performed in either polling or interrupt mode using only two bytes. Driver for all Windows operating systems and Linux We supply a 3-bit Device Driver, since you cannot access the hardware directly with modern operating systems. This driver has the same functional interface as our drivers for DOS. Thus you can access the communication interface using the same C interface for all operating system. Support for Three Types of Popular Fieldbus Communication Interfaces We support three types of popular fieldbus protocol: PROFIBUS, DeviceNet and CANopen with PCI-bus or in the PC/0 or PC/0-Plus format. PROFIBUS PROFIBUS is a multi-master system that enables mutual operation of several automation, engineering or visualization systems on a bus. We supply two PROFIBUS protocol specifications: PROFIBUS-DP and PROFIBUS-FMS, simultaneously, to satisfy different requirements. DeviceNet DeviceNet utilizes CAN technology for data transmission. The transmission rates of DeviceNet are, 0 and 00 kbaud. It is one of the most popular networks for factory automation as it can connect industrial devices to a network at a low cost without expensive wiring. CANopen Controller Area Network (CAN) is a serial network and features quick reaction and a high degree of reliability. The transmission rates in the CANopen range from kbaud up to Mbaud. CANopen is usually used in an embedded network such as machine control within industries. Industrial Communication

AD-CIF0-PB AD-CIF0-PB AD-CIF0-DPS AD-CIF0P-PB AD-CIF0-PB Bus Interface Dual-port Memory Interrupt PROFIBUS Interface PCI KB 3-, -,, via Plug & Play EN 00 Transmission Rate. kbaud to MBaud ASPC RS, optically isolated DSub-female connector -pin Diagnostic Interface General RS3C, non-isolated DSub-male connector -pin Display RDY, RUN, STA, ERR Operating Voltage V ± % / 0 ma Operating Temperature 0 ~ C (3 ~ 3 F) Dimensions (L x W x H) 3 x 0 x 0 mm (.3 x. x 0. ) Weight 30 g Software C functions library: DRV-TKIT COM interface: DRV-COM Device driver Windows: DRV-WIN Device driver Linux: DRV-LNX Documentation on CD: CD-SYS Basic version System Configurator AD-CIF0-PB Communication Interface PCI PROFIBUS-DP/FMS- Master Card AD-CIF0-PB, AD-CIF0-DPS Card Format Bus Interface Online Download www.advantech.com/products PC/0 ISA Dual-port Memory KB Interrupt 3-,-,, PROFIBUS interface EN 00 Transmission Rate. kbaud to MBaud Controller ASPC RS, optically isolated DSub-female -pin Diagnostic Interface General RS3C, non-isolated DSub-male -pin Display RDY, RUN, STA, ERR Operating Voltage + V ±% / 0 ma Operating Temperature 0 ~ C (3 ~ 3 F) Dimensions (L x W x H) 0 x x mm (3. x 3. x ) Weight 0 g Software C functions library: DRV-TKIT COM interface: DRV-COM Device driver Windows: DRV-WIN Device driver Linux: DRV-LNX Documentation on CD: CD-SYS Basic version System Configurator AD-CIF0-PB AD-CIF0-DPS PROFIBUS DP/FMS Master PCI Communication Card PROFIBUS DP/FMS Master PC/0 Module PROFIBUS DP Slave PC/0 Module PROFIBUS DP/FMS Master PC/0-Plus Module PROFIBUS-DP/FMS- Master PC/0 Module with left DSub -pin connector PROFIBUS-DP-Slave PC/0 Module with left DSub -pin connector AD-CIF0P-PB Card Format PC/0-Plus Bus Interface PCI Dual-port Memory KB Interrupt Plug & Play PROFIBUS interface EN 00 Transmission Rate. kbaud to MBaud Controller EC RS, optically isolated DSub-female -pin Diagnostic Interface RS3C, non-isolated DSub-male -pin General Display RDY, RUN, STA, ERR Operating Voltage + V ±% / 0 ma, +3.3 V ±% < 00 ma Operating Temperature 0 ~ C (3 ~ 3 F) Dimensions (L x W x H) 0 x x mm (3. x 3. x ) Weight 0 g Software C functions library: DRV-TKIT COM interface: DRV-COM Device driver Windows: DRV-WIN Device driver Linux: DRV-LNX Documentation on CD: CD-SYS Basic version System Configurator AD-CIF0P-PB PROFIBUS-DP/FMS- Master PC/0-Plus Module with left DSub -pin connector Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-

0- AD-CIF0-DNM AD-CIF0-DNM AD-CIF0-DNS AD-CIF0P-DNM AD-CIF0-DNM Bus Interface Dual-port Memory Interrupt DeviceNet Interface PCI KB 3-,-,, via Plug & Play Transmission Rates kbaud, 0 kbaud, 00 kbaud Controller SJA 000 ISO, optically isolated COMBICON -pin Diagnostic Interface General RS-3C, non-isolated DSub-male connector -pin Display RDY, RUN, NET, MOD Operating Voltage + V ±% / 0 ma, ± V ±% / 0 ma, +~ V / ma Operating Temperature 0 ~ C (3 ~ 3 F) Dimensions (L x W x H) 3 x 0 x 0 mm (.3 x. x 0. ) Weight 30 g Software C functions library: DRV-TKIT COM interface: DRV-COM Device driver Windows: DRV-WIN Device driver Linux: DRV-LNX Documentation on CD: CD-SYS Basic version System Configurator AD-CIF0-DNM Communication Interface PCI DeviceNet- Master Card AD-CIF0-DNM, AD-CIF0-DNS Card Format Bus Interface DeviceNet Master PCI Communication Card DeviceNet Master PC/0 Module DeviceNet Slave PC/0 Module DeviceNet Master PC/0-Plus Module Industrial Communication PC/0 ISA Dual-port memory KB Interrupt 3-,-,, DeviceNet Interface Transmission Rates Controller Diagnostic Interface General kbaud, 0 kbaud, 00 kbaud SJA000 ISO, optically isolated COMBICON -pin RS-3C, non-isolated RS-3C, non-isolated COMBICON -pin Display RDY, RUN, NET, MOD Operating Voltage + V ±% / 0 ma, +~ V / ma Operating Temperature 0 ~ C (3 ~ 3 F) Dimensions (L x W x H) 0 x x mm (3. x 3. x ) Weight 0 g Software C functions library: DRV-TKIT COM interface: DRV-COM Device driver Windows: DRV-WIN Device driver Linux: DRV-LNX Documentation on CD: CD-SYS Basic version System Configurator AD-CIF0-DNM AD-CIF0-DNS DeviceNet-Master PC/0 Module with left COMBICON -pin connector DeviceNet-Slave PC/0 Module with left COMBICON -pin connector AD-CIF0P-DNM Card Format Bus Interface Dual-port memory Interrupt DeviceNet Interface Transmission Rates Controller Diagnostic Interface PC/0-Plus PCI KB Plug & Play kbaud, 0 kbaud, 00 kbaud EC ISO, optically isolated COMBICON -pin RS-3C, non-isolated RS-3C, non-isolated COMBICON -pin General Display RDY, RUN, NET, MOD Operating Voltage + V ±% / 0 ma, 3.3 V ±% / 00 ma, +~ V / ma Operating Temperature 0 ~ C (3 ~ 3 F) Dimensions (L x W x H) 0 x x mm (3. x 3. x ) Weight 0 g Software C functions library: DRV-TKIT COM interface: DRV-COM Device driver Windows: DRV-WIN Device driver Linux: DRV-LNX Documentation on CD: CD-SYS Basic version System Configurator AD-CIF0P-DNM DeviceNet-Master PC/0-Plus Module with left COMBICON -pin connector

AD-CIF0-COM AD-CIF0-COM AD-CIF0-COS AD-CIF0P-COM AD-CIF0-COM Bus Interface Bus Interface Dual-port Memory Interrupt CANopen Interface PCI KB 3-,-,, via Plug & Play CiA DS-0 Transmission Rate 0 kbaud to MBaud Controller SJA 000 ISO, optically isolated DSub-male connector -pin Diagnostic Interface General RS-3C, non-isolated DSub-male connector -pin Display RDY, RUN, STA, ERR Operating Voltage + V ±% / 00 ma, ± V ±% / 0 ma Operating Temperature 0 ~ C (3 ~ 3 F) Dimensions (L x W x H) 3 x 0 x 0 mm (.3 x. x 0. ) Weight 30 g Software C functions library: DRV-TKIT COM interface: DRV-COM Device driver Windows: DRV-WIN Device driver Linux: DRV-LNX Documentation on CD: CD-SYS Basic version System Configurator AD-CIF0-COM Communication Interface PCI CANopen- Master Card AD-CIF0-COM, AD-CIF0-COS Card Format PC/0 Bus Interface Bus Interface ISA Dual-port memory KB Interrupt 3-, -,, CANopen Interface CiA DS - 0 Transmission Rate 0 kbaud to MBaud Controller SJA000 ISO, optically isolated DSub-male -pin Diagnostic Interface RS-3C, non-isolated DSub-male -pin General Display RDY, RUN, STA, ERR Operating Voltage + V ±% / 00 ma Operating Temperature 0 ~ C (3 ~ 3 F) Dimensions (L x W x H) 0 x x mm (3. x 3. x ) Weight 0 g Software C functions library: DRV-TKIT COM interface: DRV-COM Device driver Windows: DRV-WIN Device driver Linux: DRV-LNX Documentation on CD: CD-SYS Basic version System Configurator AD-CIF0-COM AD-CIF0-COS CANopen-Master PC/0 Module with left DSub -pin connector CANopen-Slave PC/0 Module with left DSub -pin connector CANopen Master PCI Communication Card CANopen Master PC/0 Module CANopen Slave PC/0 Module CANopen Master PC/0-Plus Module AD-CIF0P-COM Card Format PC/0-Plus Bus Interface Bus Interface PCI Dual-port memory KB Interrupt Plug & Play CANopen Interface CiA DS - 0 Transmission Rate 0 kbaud to MBaud Controller EC ISO, optically isolated DSub-male -pin Diagnostic Interface RS-3C, non-isolated DSub-male -pin General Display RDY, RUN, STA, ERR Operating Voltage + V ±% / 0 ma, 3.3 V ±% < 00 ma Operating Temperature 0 ~ C (3 ~ 3 F) Dimensions (L x W x H) 0 x x mm (3. x 3. x ) Weight 0 g Software C functions library: DRV-TKIT COM interface: DRV-COM Device driver Windows: DRV-WIN Device driver Linux: DRV-LNX Documentation on CD: CD-SYS Basic version System Configurator AD-CIF0P-COM CANopen-Master PC/0-Plus Module with left DSub -pin connector Online Download www.advantech.com/products Software IPPC TPC3 FPM cpci ATM & AWS DA&C 0 3 ADAM-3000 Motion Control ICOM econnectivity UNO ADAM-000 ADAM-000 ADAM-000 ADAM-000 BAS 0-

0-30 SyCon - Fieldbus System Configurator Unified operating desktop for all Fieldbus systems Supports all Slaves Graphical input of the Fieldbus system Configuration of the individual bus devices Plausibility testing of the bus parameters and the process image On-line diagnostic and statistic functions Writing and reading I/O data Export functions Uses GSD, EDS or other device description files SyCon is a universal System Configurator with a unified user desktop for all Fieldbus PC cards. As a basis for the configuration, so-called device description files or electronic data sheets, in which the characteristics of the bus device are defined, are used. These are standardised for some Fieldbus systems and are supplied by the device manufacturer. For other cases, SyCon offers this function for input. The bus structure is determined by a graphic editor where the individual devices are placed. A double click on the device opens the corresponding configuration window. A table displays all the possible modules or data that will be created with the current device configuration. The address of the data in the process image is issued manually or automatically by the configurator. The parameterization of the devices is carried out by means of the selection or entry of the values of the respective Fieldbus system. The final step is defining the bus parameters. This is limited to the definition of the transmission rate, as all other parameters are independently calculated on the basis of the data in the device description files. All process variables can be provided with a symbolic name. These are made available as labels in the interface for a primary visualisation, SoftLogic or OPC server. In this way the entry and comparison of variable addresses becomes unnecessary. SyCon offers comprehensive diagnostic aids. In diagnostic mode, the status of all devices are cyclically called up and presented in red or green depending on whether a data exchange is taking place with it at the time. By double clicking on red bus devices, the cause of the error is shown in clear text as far as possible. SyCon is provided as a basic version with every device. Without license code, the configuration is limited to two devices on a network, which is sufficient for slave modules. System Configurator with a Uniform Look and Feel All cards are configured using the SyCon System Configurator, which has been coded in C++ and executes under the Windows //ME and Windows NT/000/XP operating systems. Graphical input of the individual bus participants, clearly structured menu guidance and automatic computations of the bus parameters make the configuration a very simple exercise. PROFIBUS DeviceNET CANopen Basic Sycon Basic Sycon w/license code Basic Sycon + OPC server Basic Sycon w/license code + OPC server AD-CIF0-PB AD-CIF0-PB-S AD-CIF0-PB-O AD-CIF0-PB-SO AD-CIF0-PB AD-CIF0-PB-S AD-CIF0-PB-O AD-CIF0-PB-SO AD-CIF0-DPS N/A AD-CIF0-DPS-O N/A AD-CIF0P-PB AD-CIF0P-PB-S AD-CIF0P-PB-O AD-CIF0P-PB-SO AD-CIF0-DNM AD-CIF0-DNM-S AD-CIF0-DNM-O AD-CIF0-DNM-SO AD-CIF0-DNM AD-CIF0-DNM-S AD-CIF0-DNM-O AD-CIF0-DNM-SO AD-CIF0-DNS N/A AD-CIF0-DNS-O N/A AD-CIF0P-DNM AD-CIF0P-DNM-S AD-CIF0P-DNM-O AD-CIF0P-DNM-SO AD-CIF0-COM AD-CIF0-COM-S AD-CIF0-COM-O AD-CIF0-COM-SO AD-CIF0-COM AD-CIF0-COM-S AD-CIF0-COM-O AD-CIF0-COM-SO AD-CIF0-COS N/A AD-CIF0-COS-O N/A AD-CIF0P-COM AD-CIF0P-COM-S AD-CIF0P-COM-O AD-CIF0P-COM-SO Industrial Communication