SAN25 () Wood 002752.eps Concrete 13mm (1/2 in.) 5mm (3/16 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988 info@sanus.com Europe, Middle East, and Africa: 31 (0) 40 26 68 619 sanus.europe@sanus.com Asia Pacific: 86 755 8996 9226 800 999 6688 (mainland China only) sanus.ap@milestone.com accents.sanus.com 2009 Milestone AV Technologies, a Duchossois Group Company. All rights reserved. Sanus is a division of Milestone. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS - PLEASE READ ENTIRE MANUAL BEFORE USING THIS PRODUCT Thank you for choosing the Accents SAN25 TV mount. The SAN25 maximum weight capacity is 36 kg (80 lbs.). The SAN25 is adjustable, allowing +5 / -10 of tilt. CAUTION: Avoid potential personal injuries and property damage! CAUTION: Do not use this product for any purpose not explicitly specified by Sanus Systems. The wall must be capable of supporting five times the weight of the monitor and mount combined. This product is not designed for use in metal stud walls! If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact Sanus Systems Customer Service or call a qualified contractor. Sanus Systems is not responsible for damage or injury caused by incorrect assembly or use. 2
LEGEND? Wood stud walls Solid Concrete and Concrete Block Walls Choose an Option Do Not WARNING: This product contains small items that could be a choking hazard. Heavy! Assistance Required. Loosen/Tighten? Tools required Caution / Warning This End Up 3
Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Sanus Systems Customer Service. Never use damaged parts! [01] x 1 x 1 [03] x 1 [04] x 3 5/16 x 2.5 in. [05] x 3 M4 12mm M4 30mm [06] x 4 [07] x 4 M5 12mm M5 30mm [08] x 4 [09] x 4 M6 12mm M6 20mm M6 35mm [10] x 4 [11] x 4 [12] x 4 4 1/3 in. M4/M5 M6 M4/M5 M6 [13] x 3 [14] x 8 [15] x 4 [16] x 4 [17] x 4
5
1 Install Brackets 1. Determine the bolt diameter for your monitor or your TV type. For TVs with a flat/unobstructed back, see 1-1. For TVs with an irregular/obstructed back, see 1-2. If you need extra space to accommodate cables, recesses, or protrusions, see an installation option (1-2) that uses spacers. 2. Ensure that the brackets are level on the back of the TV. CAUTION: Standard configurations are shown. For special applications, contact Customer Service. CAUTION: Use the shortest screw and spacer combination needed to accommodate cables, recesses, or protrusions. Using hardware that is too long may damage your TV s internal components. 6
1-1 [03] M4 [06] M5 [08] [14] [14] M6 [10] M6 [11] [15] [15] 7
1-2 [03] M4 [07] M5 [09] [14] [14] [14] [14] [16] [16] M6 [12] [15] [17] 8
2 Adjust the length of the straps.?? 9
3 5mm (3/16 in.) CAUTION: WOOD STUD MOUNTING 1. NOTE: Use awl to verify stud location. Any material covering the wall must not exceed 16 mm (5/8 in.). 2. Mark locations for pilot holes using wall plate as a guide. 3. Drill pilot holes to a depth of 63.5mm (2.5 in.). 4. and 5. CAUTION: Do not over-tighten the lag bolts [05]. Tighten the lag bolts [05] only until the washers [13] are pulled against the wall plate [01]. 10
1 < 16 mm (5/8 in.) 63.5mm 2.5 in. 2 3 [01] 4 5 [05] [13] 001603.eps Generic - Mount 11
4 13mm (1/2 in.) CAUTION: SOLID CONCRETE AND CONCRETE BLOCK MOUNTING 1. Mark locations for pilot holes using wall plate as a guide. CAUTION: To prevent property damage or personal injury, never drill into mortar between blocks. 2. Drill pilot holes to a depth of 63.5mm (2.5 in.). 3. Make sure Concrete Anchor [04] is seated flush with surface. Any material covering the wall must not exceed 16 mm (5/8 in.). 4. CAUTION: Do not over-tighten the lag bolts [05]. Tighten the lag bolts [05] only until the washers [13] are pulled against the wall plate [01]. 12
1 [01] 2 3 63.5mm 2.5 in. 4 [05] [13] [04] 13
4 CAUTION: CAUTION: You will need assistance with this step. Install the TV / Bracket assembly by fitting the top hook of the mounting bracket over the top edge of the wall mount. Swing the mounting bracket down until the spring loaded locking tabs slip over and fully engages the bottom edge of the wall mount. You will hear an audible "CLICK". 14
5 A: Adjust up / down tilt tension CAUTION: 10 5 A To remove TV from wall mount, pull down on bracket straps to release the locking tabs. Swing TV / bracket assembly forward from the bottom and lift the TV from the wall mount. 15
Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, Milestone ), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. 16