Small Battery Drive. For orthopaedic trauma applications. Ergonomic, lightweight design Compatible with a wide variety of attachments Variable speed trigger with instant reverse and oscillation
Small Battery Drive. For orthopaedic trauma applications. The Small Battery Drive (532.010) is indicated for most orthopaedic trauma applications, including drilling, sawing, inserting K-wires, DHS, DCS and intramedullary reaming. Optimal performance can be achieved by selecting the appropriate battery for the specific application. Features Ergonomic, lightweight design Batteries retain life longer than autoclaved batteries Two battery sizes for wider range of indications Compatible with a wide variety of attachments Fully cannulated to 3.2 mm Variable speed trigger with instant reverse and oscillation Specifications Variable speed: 0 3,840 rpm (max. speed varies by attachment) Maximum torque: 0 6.0 Nm (max. torque varies by attachment) Weight, including 12 V battery: 810 grams, including 14.4 V battery: 916 grams Cannulation: 3.2 mm 532.010 Battery Casing (532.002) Specifications for batteries Capacity: 0.5 Amp hours Type: NiCd Working temperature: 0 C to 50 C (32 F to 122 F) Discharge protection: prevents total battery discharge, significantly decreases memory effect, maintains battery capacity, and increases battery life Mode switch turns drive off for safe attachment exchange and selects on or oscillation mode Synthes 1
Small Battery Drive. For orthopaedic trauma applications. 12 V Battery (532.003) Voltage: 12 VDC Charging time: 30 minutes maximum Indications include drilling, sawing, and inserting K-wires Drilling Sawing K-wire insertion 14.4 V Battery (532.033) Voltage: 14.4 VDC Charging time: 40 minutes maximum Indications include DHS, DCS, and intramedullary reaming Reaming 2 Synthes Small Battery Drive
Attachments for Small Battery Drive Drilling speed attachments 532.011 Mini Quick Coupling 532.012 Stryker J-Latch Coupling With 12 V battery: Maximum speed: 3,200 rpm Maximum torque: 0.5 Nm With 14.4 V battery: Maximum speed: 3,840 rpm Maximum torque: 0.6 Nm Accepts mini quick coupling or Stryker J-Latch drill bits 532.022 Quick Coupling for K-Wires Cannulation: 3.2 mm (fully open) With 12 V battery: Maximum speed: 800 rpm Maximum torque: 3.0 Nm With 14.4 V battery: Maximum speed: 900 rpm Maximum torque: 2.3 Nm To insert/ remove Kirschner wires and guide pins 0.6 mm 3.2 mm in diameter (any length) The following drilling speed attachments are geared for a maximum drive speed of 1,200 rpm with the 12 V battery and 1,440 rpm with the 14.4 V battery. The maximum torque is 1.3 Nm with the 12 V battery and 1.6 Nm with the 14.4 V battery.* 05.001.250 AO Quick Coupling for Drill Bits Cannulation: 2.1 mm Accepts cutting tools and instruments with the AO quick coupling fitting 05.001.252 Small Chuck with Key Cannulation: 3.3 mm Accepts round and triangular shafts: up to 4.5 mm * Performance specifications on file at Synthes. Small Battery Drive Synthes 3
Attachments for Small Battery Drive Drilling speed attachments continued 05.001.253 Large Chuck with Key Cannulation: 3.3 mm Accepts round and triangular shafts: up to 7.3 mm Saw attachments 532.021 Sagittal Saw Attachment Maximum speed: With 12 V battery= 15,000 oscillations per minute With 14.4 V battery= 18,000 oscillations per minute 532.023 Oscillating Saw Attachment II Maximum speed: With 12 V battery= 15,000 oscillations per minute With 14.4 V battery= 18,000 oscillations per minute 532.026 Oscillating Saw Attachment, large Maximum speed: With 12 V battery= 15,000 oscillations per minute With 14.4 V battery= 18,000 oscillations per minute Reaming speed attachments The following reaming speed attachments are geared for a maximum speed of 384 rpm and a maximum torque of 6.0 Nm with the 14.4 V battery.* All reduction drive units allow intramedullary reaming with most IM nail systems. Note: The reaming speed attachments should only be used with the 14.4 V battery for optimal performance. 05.001.251 AO Screw Attachment Cannulation: 2.0 mm Accepts AO coupling screwdriver * Performance specification on file at Synthes. 4 Synthes Small Battery Drive
05.001.254 Chuck with Key Cannulation: 3.2 mm Accepts round and triangular shafts: up to 7.3 mm 532.015 Large Quick Coupling Cannulation: 3.2 mm Accepts DHS and DCS triple reamers, screwdriver shafts and cannulated drill bits with large quick coupling fitting 532.017 AO Reduction Drive Unit Cannulation: 3.2 mm Accepts cutting tools and instruments with AO reaming fitting 532.018 Hudson Reduction Drive Unit Cannulation: 3.2 mm Accepts cutting tools and instruments with Hudson fitting 532.019 Trinkle Reduction Drive Unit Cannulation: 3.2 mm Accepts cutting tools and instruments with Trinkle fitting 532.020 Modified Trinkle Reduction Drive Unit Cannulation: 3.2 mm Accepts cutting tools and instruments with modified Trinkle fitting Small Battery Drive Synthes 5
Battery Pack Assembly Batteries and battery charger Advanced battery technology and nonautoclavable batteries prevent total battery discharge, significantly decrease memory effect, maintain battery capacity, and increase battery life One battery charger for all Synthes power equipment batteries simplifies charging process Intuitive assembly of battery pack Battery pack assembly Allows use of nonsterile batteries to increase battery life Encloses battery within sterile field 1 2 Scrubbed 3 Circulating 4 Scrubbed Scrubbed 1 Hold the sterilized battery casing and open the lid. 2 Place the sterilized battery insertion shield on the battery casing. Circulating 3 Carefully insert the nonsterile battery into the sterile battery casing. Scrubbed Circulating Scrubbed 4 Press firmly until it engages. 5 Remove the battery insertion shield. 5 Circulating Scrubbed 6 Close and lock the lid. Scrubbed 6 Synthes Small Battery Drive
Small Battery Drive Set (105.955) Graphic Case 60.550.010 Base Assembly for Small Battery Drive Graphic Case 60.550.011 Lid for Small Battery Drive Graphic Case 60.550.012 Attachment Rack for Small Battery Drive Graphic Case 60.550.013 Insert Tray for 12 V Battery Casings 60.550.016 Insert Tray for Small Battery Drive Handpiece and Radiolucent Drive Instruments 05.001.250 AO Quick Coupling for Drill Bits 05.001.253 Large Chuck with Key, Drilling Speed 05.001.204 Universal Battery Charger II 532.002 Battery Casing, for 12 V Battery, 2 ea. 532.003 Small Battery Drive 12 V Battery, 2 ea. 532.004 Battery Insertion Shield, 2 ea. 532.010 Small Battery Drive 532.011 Mini Quick Coupling 532.012 Stryker J-Latch Coupling 532.015 Large Quick Coupling 532.021 Sagittal Saw Attachment 532.022 Quick Coupling for K-Wires 60.550.010, 60.550.011 and 60.550.012 60.550.013 60.550.016 Small Battery Drive Synthes 7
Small Battery Drive with 14.4 V Battery Pack Set (105.954) Graphic Case 60.550.010 Base Assembly for Small Battery Drive Graphic Case 60.550.011 Lid for Small Battery Drive Graphic Case 60.550.012 Attachment Rack for Small Battery Drive Graphic Case 60.550.013 Insert Tray for 12 V Battery Casings 60.550.014 Insert Tray for 14.4 V Battery Casings 60.550.016 Insert Tray for Small Battery Drive Handpiece and Radiolucent Drive 60.550.010, 60.550.011 and 60.550.012 Instruments 05.001.250 AO Quick Coupling for Drill Bits 05.001.253 Large Chuck with Key, Drilling Speed 05.001.204 Universal Battery Charger II 532.002 Battery Casing, for 12 V Battery, 2 ea. 532.003 Small Battery Drive 12 V Battery, 2 ea. 532.004 Battery Insertion Shield, 2 ea. 532.010 Small Battery Drive 532.011 Mini Quick Coupling 532.012 Stryker J-Latch Coupling 532.015 Large Quick Coupling 532.017 AO Reduction Drive 532.021 Sagittal Saw Attachment 532.022 Quick Coupling for K-Wires 532.031 Adaptor for Radiolucent Drive 532.032 Small Battery Drive Casing, for 14.4 V Battery, 2 ea. 532.033 Small Battery Drive 14.4 V Battery, 2 ea. 60.550.013 60.550.014 60.550.016 8 Synthes Small Battery Drive
Also Available Instruments 05.001.108 Light Adaptor for Small Battery Drive, for Electric Pen Drive 05.001.251 AO Screw Attachment 05.001.252 Small Chuck with Key, Drilling Speed 05.001.254 Large Chuck with Key, Reaming Speed 310.93K Replacement Key for Small Chuck with Key (05.001.252) 510.19 Replacement Key for Large Chucks (05.001.253 and 05.001.254) 511.30 Radiolucent Drive 519.40 Cleaning Brush 519.97 Autoclavable Oil 532.023 Oscillating Saw Attachment II 532.026 Oscillating Saw Attachment, large 532.018 Hudson Reduction Drive Unit 532.019 Trinkle Reduction Drive Unit 532.020 Modified Trinkle Reduction Drive Unit 05.001.252 511.30 Graphic Case 60.550.015 Insert Tray for Small Battery Drive Adaptor for Electric Pen Drive 60.550.017 Insert Tray for Two Small Battery Drive Handpieces 60.550.018 Label Sheet for Small Battery Drive Set Attachment Rack 690.525 Small Graphic Case for Small Battery Drive Set 690.576.04 Grommets for Attachment Rack for Small Battery Drive Graphic Case, 4 pack Service and Extended Warranty Programs W1.105.955 One-Year Extended Warranty and Service Program, for Small Battery Drive Set W3.105.955 Three-Year Extended Warranty and Service Program, for Small Battery Drive Set Small Battery Drive Synthes 9
Synthes Anspach 4500 Riverside Drive Palm Beach Gardens, FL 33410 Telephone: (561) 627-1080 To order: (800) 327-6887 Fax: (800) 327-6661 E-mail: info@anspach.com Synthes (Canada) Ltd. 2566 Meadowpine Boulevard Mississauga, Ontario L5N 6P9 Telephone: (905) 567-0440 To order: (800) 668-1119 Fax: (905) 567-3185 www.synthes.com www.anspach.com 2002 Synthes, Inc. or its affiliates. All rights reserved. DCS, DHS and Synthes are trademarks of Synthes, Inc. or its affiliates. Printed in U.S.A. 1/12 J3992-F