Measurement devices Accessories for analogue and digital instruments



Similar documents
CT Current transformers Ideal for measuring. Designed to create efficiency.

Current transformers (CT) & Shunts

How To Build A Low Voltage Capacitor Lvcp

keep your measure under control

Measurement and Instrumentation

LOW-VOLTAGE CURRENT TRANSFORMERS

KOLMA and IHDA Indoor type Cable Current Transformers Catalogue ABB Power Distribution ABB Transmit 1 KKOLMA 1 GB

Quick Connect. quick - simple - efficient.

Medium-voltage transformers

Kit Watt Audio Amplifier

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES

Electro-pneumatic control valves

ISL Insulation monitoring devices Continuous monitoring of IT systems from photovoltaic to industrial applications.

Vario-Series Accessories

LOW VOLTAGE RING TYPE MEASURING CURRENT TRANSFORMERS

Current & Instrument Transformers

NIVOCONT CONDUCTIVE LEVEL SWITCHES LEVEL SWITCHES

Z-TRAUQ INC. Tel.: (450) Fax: (450)

A project to optimise quality and energy efficiency must include metering

PSR The compact range Description

MILLENIUM INSTALLATION MANUAL NTR 735 A. Simple Automation Control Module (MAS)

ELECTROMAGNETIC DISC BRAKES

Temperature sensor with integrated transmitter for industrial applications, MBT 3560

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact

Enhanced Quality with a Touch of Style

Single-phase ( V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable

Features. Display. Measurements. Intelligent. Accuracy. Models. Installation DEIF A/S. Multi-instrument D

Pressure monitoring equipment for oil-sf 6. bushings, type GOEK

Product data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS /

Model CS 64 Mini-DIN Cable and Adaptor

T Substation Maintenance and Commissioning Test Equipment

RM17TE V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...

Type: EASY719 DC RC Article No.: Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description

ISIO 200. Binary Input/Output (I/O) Terminal with IEC Interface

Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q R0001

Pluggable interface relays CR-P Pcb relays

Product and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information.

B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment

Switch Actuator, 8-fold, 10 A, MDRC AT/S , GH Q R0111

Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw

Tape Wound, Split Core and Ebony Current Transformers

3/2-way Solenoid Valve, direct-acting, NC or NO

RM4TG20 three-phase network control relay RM4-T - range V

C13 User Manual Document ID: 2CMC486004M0201 Revision: A

Maximum Demand Control

RISH EM 3490 DS Dual Source Energy Meter RISH EM 3490 DS. Application : Product Features:

Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1

SURGE PROTECTIVE DEVICES

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER

Technical data UNIBLOCK UBSF

38 Series - Relay interface modules A

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase

38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.

Tape Wound, Split Core and Ebony Current Transformers

SMS 4 / SMS 5 safety mat Product information

NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals

CURRENT TRANSFORMER MODEL 546 UL1015 #16 AWG LEAD WIRE, STANDARD LENGTH IS 24" 1 X

Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series

R.C.C.B. s two-pole LEXIC

Catalog EN. Content Transformers for industrial applications

15 Series - Electronic step relay and dimmer. Features SERIE

Digital Pressure Measuring Instrument MDR480

Electronic overload relay EF19 and EF45

How To Choose A Transformer

VEO. V4PF480Y/277VSYTK02 Art.Nr.: V4PF480Y/277VSYTK02P Art.Nr.: TECHNICAL DATA

RM35UA13MW. range V. Main. Product or component type. Relay monitored parameters

Technical Description. Transistor D.C. Chopper Controller Type GS 24 S

Series 6000 Torque measured metal bellow coupling

servo-controlled 3-WaY vacuum solenoid valves WiTH

E-STOP relays, safety gate monitors

Electronic timer CT-VBS OFF-delayed without auxiliary voltage, for DC contactors Data sheet

MOUNTING AND OPERATING INSTRUCTIONS

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous

3/2- and 2/2-way cartridge valve type BVE

DRM75A 230V 20/100A DIN rail single phase two wire energy meter

LENORD. +BAUER... automates motion. PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space

Low voltage transformers

Thermal-Magnetic Circuit Breaker M1-..

APPENDIX A PIN-OUT OF RJ12 / RJ45 CONNECTORS. RJ12 connectors

AF / AF09Z stack 3-pole Contactors AC / DC Operated - with Screw Terminals

HERZ-Thermal Actuators

Using Current Transformers with the 78M661x

Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm

HARDWARE MANUAL. Ixx24-A 1/20. Val Controls A/S Limfjordsvej 3 DK-6715 Esbjerg N Tel vc@valcontrols.com

Phone: Fax: Web: info@clrwtr.com

0.84" x 2.00" Z-TRAUQ INC. Tel.: (450) Fax: (450) z-trauq@qc.aira.com SPLIT CORE CURRENT TRANSFORMER MODEL 1SP.

38 Series - Relay interface modules A

H/L = Power supply. FN = Nominal Frequency. RN = Rated value of output burden. UN = Nominal input voltage. IN = Nominal input current.

Electric Rotary Actuator - On/Off or programmable control actuator

Features. Picture. Specifications

Proportional pressure regulators VPPE

Top Microsystems Proprietary Specification P/N: W090015HK-XP RB V.A0 SPECIFICATION

PCB transformers. Short circuit proof PCB transformer VB. General Data. Advantages. Applications. Circuit diagram. Standards & 1 Certifications W v

AIR-AIR PRESSURE MULTIPLIER (BOOSTER)

3-phase, bidirectional energy meter

EMO T. Thermal actuator for heating, ventilation and air conditioning systems

RY2 miniature industrial relays

Reaction Torque Sensor

Transcription:

Accessories for analogue and digital instruments 1 2CSC96F0001 Current transformers Used to transform primary currents (max. 6000 A) into.../5 A and.../1 A low secondary currents indirectly supplying power to analogue and digital measurement devices. They are available both with wound and through primary. In the first case they are provided along with the bar or the primary terminal; in the second case they have a hole to insert in the bar or the cable which forms the primary. Standard type current transformers Code Type Code Type Description Current transformer with wound primary, primary and secondary current on terminals - - EQ 36 8 CTA/1-1 Iprim 1 A, 0.5 rating 5 VA, rating 1 7 VA EH 000 1 CTA/5 EQ 37 6 CTA/5-1 Iprim 5 A, 0.5 rating 5 VA, rating 1 7 VA EH 005 0 CTA/10 EQ 38 CTA/10-1 Iprim 10 A, 0.5 rating 5 VA, rating 1 7 VA EH 006 8 CTA/15 EQ 39 2 CTA/15-1 Iprim 15 A, 0.5 rating 5 VA, rating 1 7 VA EH 010 0 CTA/20 EQ 351 8 CTA/20-1 Iprim 20 A, 0.5 rating 5 VA, rating 1 7 VA EH 019 1 CTA/25 EQ 352 6 CTA/25-1 Iprim 25 A, 0.5 rating 5 VA, rating 1 7 VA EH 020 9 CTA/0 EQ 353 CTA/0-1 Iprim 0 A, 0.5 rating 5 VA, rating 1 7 VA EH 02 1 CTA/ EQ 35 2 CTA/-1 Iprim A, 0.5 rating 5 VA, rating 1 7 VA EH 025 8 CTA/60 EQ 355 9 CTA/60-1 Iprim 60 A, 0.5 rating 5 VA, rating 1 7 VA EH 026 6 CTA/80 EQ 356 7 CTA/80-1 Iprim 80 A, 0.5 rating 5 VA, rating 1 7 VA EH 027 CTA/100 EQ 357 5 CTA/100-1 Iprim 100 A, 0.5 rating 5 VA, rating 1 7 VA Technical characteristics Standard secondary current [A] 5 (other secondary on request) Max. voltage for operation 1 [kv] 1.2 (0.72 for compact version) Test voltage 2 [kv] 6 at Hz/1 min. (3 for compact version) Short circuit rated thermal current I min 3 [IpN] 0 for 1 sec. Short circuit rated dynamic current I min [I ter ] 2.5 for 1 sec. Permanent overload [IpN] 1.2 Safety factor 5 [Fs] 2 at 10 according to version and capacity Frequency [Hx] /60 Air insulation Terminals 6 Housing Protection degree E class primary = P1, P2 (K-L) secondary = s1, s2 (k-l) P1 (K)=primary wound input P2 (L)=primary wound output s1 (k)=secondary wound input s2 (l)=secondary wound output with double ration on secondary s1-s2=lower ratio, s1-s3=higher ratio ABS resin IP30 Operating temperature [ C] -20 + Max. temperature on bars [ C] +70 Storage temperature [ C] -0 +80 Relative humidity 80% 1 Max. voltage (effective value) the transformer can bear. 2 Industrial frequency voltage in relation to insulation the transformer bears for 1 min. between the primary and the secondary. 3 Max. primary current (effective value) the transformer bears for 1 sec. with counter-circuited secondary without overload-induced damages. Max. primary current (effective value) the transformer bears for 1 sec. with counter-circuited secondary without damaged due to electromagnetic efforts. 5 Ratio between primary current causing nucleus saturation and the rated primary current value: the lower the Sf the higher the protection level on the transformer. 6 Brass terminals CuZn37, Mx6 screws with torsion value 1.9 Nm, tensile value 0 N/mm 2 and elasticity limit 30 N/mm 2. During the installation control the correct input (P1-K) and output (P2-L) direction of the primary cable. On versions with primary and secondary on terminals pay attention the connection of the primary with the secondary is not inverted. In the case of a detachment from measurement devices of the transformer in a connected plant counter-circuit the two terminals of the transformer. It is suggested to earth the transformers. 1/30 ABB SACE

Accessories for analogue and digital instruments Code Type Code Type Description - - EQ 358 3 CTA1/1-1 Iprim 1 A, 0.5 rating 10 VA, rating 1 20 VA EH 028 2 CTA1/5 EQ 359 1 CTA1/5-1 Iprim 5 A, 0.5 rating 10 VA, rating 1 20 VA EH 029 0 CTA1/10 EQ 360 9 CTA1/10-1 Iprim 10 A, 0.5 rating 10 VA, rating 1 20 VA EH 030 8 CTA1/15 EQ 361 7 CTA1/15-1 Iprim 15 A, 0.5 rating 10 VA, rating 1 20 VA EH 035 7 CTA1/20 EQ 362 5 CTA1/20-1 Iprim 20 A, 0.5 rating 10 VA, rating 1 20 VA EH 036 5 CTA1/25 EQ 363 3 CTA1/25-1 Iprim 25 A, 0.5 rating 10 VA, rating 1 20 VA EH 037 3 CTA1/0 EQ 36 1 CTA1/0-1 Iprim 0 A, 0.5 rating 10 VA, rating 1 20 VA EH 038 1 CTA1/ EQ 365 8 CTA1/-1 Iprim A, 0.5 rating 10 VA, rating 1 20 VA EH 039 9 CTA1/60 EQ 366 6 CTA1/60-1 Iprim 60 A, 0.5 rating 10 VA, rating 1 20 VA EH 00 7 CTA1/80 EQ 367 CTA1/80-1 Iprim 80 A, 0.5 rating 10 VA, rating 1 20 VA EH 055 5 CTA1/100 EQ 368 2 CTA1/100-1 Iprim 100 A, 0.5 rating 10 VA, rating 1 20 VA EH 056 3 CTA1/1 EQ 369 0 CTA1/1-1 Iprim 1 A, 0.5 rating 10 VA, rating 1 20 VA EH 057 1 CTA1/200 EQ 370 8 CTA1/200-1 Iprim 200 A, 0.5 rating 10 VA, rating 1 20 VA EH 058 9 CTA1/2 EQ 371 6 CTA1/2-1 Iprim 2 A, 0.5 rating 10 VA, rating 1 20 VA EH 059 7 CTA1/300 EQ 372 CTA1/300-1 Iprim 300 A, 0.5 rating 10 VA, rating 1 20 VA EH 060 5 CTA1/00 EQ 373 2 CTA1/00-1 Iprim 00 A, 0.5 rating 10 VA, rating 1 20 VA EH 065 CTA1/0 EQ 37 0 CTA1/0-1 Iprim 0 A, 0.5 rating 10 VA, rating 1 20 VA 1 - - EQ 3 7 CTA2/1-1 Iprim 1 A, 0.5 rating 10 VA, rating 1 35 VA EH 066 2 CTA2/5 EQ 376 5 CTA2/5-1 Iprim 5 A, 0.5 rating 10 VA, rating 1 35 VA EH 067 0 CTA2/10 EQ 377 3 CTA2/10-1 Iprim 10 A, 0.5 rating 10 VA, rating 1 35 VA EH 068 8 CTA2/15 EQ 378 1 CTA2/15-1 Iprim 15 A, 0.5 rating 10 VA, rating 1 35 VA EH 069 6 CTA2/20 EQ 379 9 CTA2/20-1 Iprim 20 A, 0.5 rating 10 VA, rating 1 35 VA EH 070 CTA2/25 EQ 380 7 CTA2/25-1 Iprim 25 A, 0.5 rating 10 VA, rating 1 35 VA EH 073 8 CTA2/0 EQ 381 5 CTA2/0-1 Iprim 0 A, 0.5 rating 10 VA, rating 1 35 VA EH 07 6 CTA2/ EQ 382 3 CTA2/-1 Iprim A, 0.5 rating 10 VA, rating 1 35 VA EH 0 3 CTA2/60 EQ 383 1 CTA2/60-1 Iprim 60 A, 0.5 rating 10 VA, rating 1 35 VA EH 076 1 CTA2/80 EQ 38 9 CTA2/80-1 Iprim 80 A, 0.5 rating 10 VA, rating 1 35 VA EH 077 9 CTA2/100 EQ 385 6 CTA2/100-1 Iprim 100 A, 0.5 rating 10 VA, rating 1 35 VA EH 088 6 CTA2/1 EQ 386 CTA2/1-1 Iprim 1 A, 0.5 rating 10 VA, rating 1 35 VA EH 089 CTA2/200 EQ 387 2 CTA2/200-1 Iprim 200 A, 0.5 rating 10 VA, rating 1 35 VA EH 097 7 CTA2/2 EQ 388 0 CTA2/2-1 Iprim 2 A, 0.5 rating 10 VA, rating 1 35 VA EH 098 5 CTA2/300 EQ 389 8 CTA2/300-1 Iprim 300 A, 0.5 rating 10 VA, rating 1 35 VA EH 099 3 CTA2/00 EQ 390 6 CTA2/00-1 Iprim 00 A, 0.5 rating 10 VA, rating 1 35 VA EH 100 9 CTA2/0 EQ 391 CTA2/0-1 Iprim 0 A, 0.5 rating 10 VA, rating 1 35 VA 2CSC97F0001 EH 685 9 CT3/0 EQ 392 2 CT3/0-1 Iprim 0 A, 3 rating 2 VA EH 686 7 CT3/ EQ 393 0 CT3/-1 Iprim A, 3 rating 2 VA EH 687 5 CT3/60 EQ 39 8 CT3/60-1 Iprim 60 A, 3 rating 2 VA EH 688 3 CT3/80 EQ 395 5 CT3/80-1 Iprim 80 A, 3 rating 3 VA EH 689 1 CT3/100 EQ 396 3 CT3/100-1 Iprim 100 A, 1 rating 3 VA EH 690 9 CT3/1 EQ 397 1 CT3/1-1 Iprim 1 A, 0.5 rating 3 VA EH 691 7 CT3/200 EQ 399 7 CT3/200-1 Iprim 200 A, 0.5 rating 3 VA EH 692 5 CT3/2 EQ 00 3 CT3/2-1 Iprim 2 A, 0.5 rating 6 VA EH 693 3 CT3/300 EQ 01 1 CT3/300-1 Iprim 300 A, 0.5 rating 6 VA EH 69 1 CT3/00 EQ 02 9 CT3/00-1 Iprim 00 A, 0.5 rating 6 VA EH 695 8 CT3/0 EQ 03 7 CT3/0-1 Iprim 0 A, 0.5 rating 6 VA EH 696 6 CT3/600 EQ 0 5 CT3/600-1 Iprim 600 A, 0.5 rating 6 VA 2CSC5105F0001 EH 697 CT/100 EQ 05 2 CT/100-1 Iprim 100 A, 1 rating 3 VA EH 698 2 CT/1 EQ 06 0 CT/1-1 Iprim 1 A, 1 rating 3 VA EH 699 0 CT/200 EQ 07 8 CT/200-1 Iprim 200 A, 0.5 rating VA EH 700 6 CT/2 EQ 08 6 CT/2-1 Iprim 2 A, 0.5 rating 6 VA EH 701 CT/300 EQ 09 CT/300-1 Iprim 300 A, 0.5 rating 6 VA EH 702 2 CT/00 EQ 11 0 CT/00-1 Iprim 00 A, 0.5 rating 10 VA EH 703 0 CT/0 EQ 12 8 CT/0-1 Iprim 0 A, 0.5 rating 10 VA EH 70 8 CT/600 EQ 1 CT/600-1 Iprim 600 A, 0.5 rating 10 VA EH 705 5 CT/800 EQ 15 1 CT/800-1 Iprim 800 A, 0.5 rating 10 VA EH 706 3 CT/1000 EQ 16 9 CT/1000-1 Iprim 1000 A, 0.5 rating 10 VA ABB SACE 1/31

Accessories for analogue and digital instruments 1 2CSC98F0001 Code Type Code Type Description EH 707 1 CT5/2 EQ 17 7 CT5/2-1 Iprim 2 A, 0.5 rating 3 VA EH 708 9 CT5/300 EQ 18 5 CT5/300-1 Iprim 300 A, 0.5 rating VA EH 709 7 CT5/00 EQ 19 3 CT5/00-1 Iprim 00 A, 0.5 rating 6 VA EH 710 5 CT5/0 EQ 20 1 CT5/0-1 Iprim 0 A, 0.5 rating 10 VA EH 711 3 CT5/600 EQ 9 CT5/600-1 Iprim 600 A, 0.5 rating 10 VA EH 712 1 CT5/800 EQ 22 7 CT5/800-1 Iprim 800 A, 0.5 rating 10 VA EH 713 9 CT5/1000 EQ 23 5 CT5/1000-1 Iprim 1000 A, 0.5 rating 10 VA EH 71 7 CT5/1200 EQ 2 3 CT5/1200-1 Iprim 1200 A, 0.5 rating 10 VA EH 715 CT5/10 EQ 25 0 CT5/10-1 Iprim 10 A, 0.5 rating 20 VA 2CSC5101F0001 2CSC510F0001 EH 716 2 CT6/2 EQ 26 8 CT6/2-1 Iprim 2 A, 0.5 rating 5 VA EH 717 0 CT6/300 EQ 27 6 CT6/300-1 Iprim 300 A, 0.5 rating 5 VA EH 718 8 CT6/00 EQ 28 CT6/00-1 Iprim 00 A, 0.5 rating 6 VA EH 719 6 CT6/0 EQ 29 2 CT6/0-1 Iprim 0 A, 0.5 rating 6 VA EH 720 CT6/600 EQ 30 0 CT6/600-1 Iprim 600 A, 0.5 rating 10 VA EH 7 2 CT6/800 EQ 31 8 CT6/800-1 Iprim 800 A, 0.5 rating 10 VA EH 722 0 CT6/1000 EQ 32 6 CT6/1000-1 Iprim 1000 A, 0.5 rating 20 VA EH 723 8 CT6/1200 EQ 33 CT6/1200-1 Iprim 1200 A, 0.5 rating 20 VA EH 72 6 CT6/10 EQ 3 2 CT6/10-1 Iprim 10 A, 0.5 rating 30 VA EH 725 3 CT6/2000 EQ 35 9 CT6/2000-1 Iprim 2000 A, 0.5 rating 30 VA EH 726 1 CT6/20 EQ 36 7 CT6/20-1 Iprim 20 A, 0.5 rating 30 VA EH 727 9 CT8/300 EQ 37 5 CT8/300-1 Iprim 300 A, 0.5 rating 5 VA EH 728 7 CT8/00 EQ 38 3 CT8/00-1 Iprim 00 A, 0.5 rating 6 VA EH 729 5 CT8/0 EQ 39 1 CT8/0-1 Iprim 0 A, 0.5 rating 10 VA EH 730 3 CT8/600 EQ 1 7 CT8/600-1 Iprim 600 A, 0.5 rating 10 VA EH 731 1 CT8/800 EQ 2 5 CT8/800-1 Iprim 800 A, 0.5 rating 10 VA EH 732 9 CT8/1000 EQ 3 3 CT8/1000-1 Iprim 1000 A, 0.5 rating 10 VA EH 733 7 CT8/1200 EQ 1 CT8/1200-1 Iprim 1200 A, 0.5 rating 15 VA EH 73 5 CT8/10 EQ 5 8 CT8/10-1 Iprim 10 A, 0.5 rating 20 VA EH 735 2 CT8/2000 EQ 6 6 CT8/2000-1 Iprim 2000 A, 0.5 rating 20 VA EH 736 0 CT8/20 EQ 7 CT8/20-1 Iprim 20 A, 0.5 rating 20 VA EH 737 8 CT8/3000 EQ 8 2 CT8/3000-1 Iprim 3000 A, 0.5 rating 20 VA EH 78 5 CT8-V/00 EQ 9 0 CT8-V/00-1 Iprim 00 A, 0.5 rating 6 VA EH 79 3 CT8-V/0 EQ 8 CT8-V/0-1 Iprim 0 A, 0.5 rating 10 VA EH 7 1 CT8-V/600 EQ 51 6 CT8-V/600-1 Iprim 600 A, 0.5 rating 10 VA EH 1 9 CT8-V/800 EQ 52 CT8-V/800-1 Iprim 800 A, 0.5 rating 10 VA EH 2 7 CT8-V/1000 EQ 53 2 CT8-V/1000-1 Iprim 1000 A, 0.5 rating 10 VA EH 3 5 CT8-V/1200 EQ 5 0 CT8-V/1200-1 Iprim 1200 A, 0.5 rating 10 VA EH 3 CT8-V/10 EQ 56 5 CT8-V/10-1 Iprim 10 A, 0.5 rating 10 VA EH 5 0 CT8-V/2000 EQ 57 3 CT8-V/2000-1 Iprim 2000 A, 0.5 rating 20 VA EH 6 8 CT8-V/20 EQ 58 1 CT8-V/20-1 Iprim 20 A, 0.5 rating 20 VA EH 738 6 CT12/0 EQ 59 9 CT12/0-1 Iprim 0 A, 0.5 rating 10 VA EH 739 CT12/600 EQ 60 7 CT12/600-1 Iprim 600 A, 0.5 rating 10 VA EH 70 2 CT12/800 EQ 61 5 CT12/800-1 Iprim 800 A, 0.5 rating 15 VA EH 71 0 CT12/1000 EQ 63 1 CT12/1000-1 Iprim 1000 A, 0.5 rating 20 VA EH 72 8 CT12/1200 EQ 6 9 CT12/1200-1 Iprim 1200 A, 0.5 rating 20 VA EH 73 6 CT12/10 EQ 65 6 CT12/10-1 Iprim 10 A, 0.5 rating 20 VA EH 7 CT12/2000 EQ 66 CT12/2000-1 Iprim 2000 A, 0.5 rating 30 VA EH 1 CT12/20 EQ 67 2 CT12/20-1 Iprim 20 A, 0.5 rating 0 VA EH 76 9 CT12/3000 EQ 69 8 CT12/3000-1 Iprim 3000 A, 0.5 rating 0 VA EH 77 7 CT12/000 EQ 70 6 CT12/000-1 Iprim 000 A, 0.5 rating VA EH 88 8 CT12/00 EQ 71 CT12/00-1 Iprim 00 A, 0.5 rating VA EH 891 3 CT12/6000 EQ 72 2 CT12/6000-1 Iprim 6000 A, 0.5 rating VA 1/32 ABB SACE

Standard type current transformers CTA From 1 to 0 A 5 from 0 to 100 A 5 2 0 0.2 2 6 56 55 63 CTA1 TRFM 85 5 3 modules 52.5 58 CTA2 30.5. 11.2 37.5 10.8 13.9. 96 83.5 83 M10 15 15 17.5.2 6 56 55 63 88 130 105 M 103.5 ø9 60 x35 ø.2 69 69 97 85 85 58 Accessory for fixing on DIN rail ABB SACE /11

CT 109 CT5 5 1 CT6 76.7 82 1 100 6.7 51.3 20. 22.5 100 60.7 52.1 2.2 3.2 31.3. 25.3 87 60 0.7 11.1 5.5 0.7 11,2 20 25 30 20.9 25.8 33 Accessory for fixing on DIN rail 85 5 12 3.3 105 61 5. /12 ABB SACE

CT8 76.7 82 120 12 82.5 3.6 32.5 125 61.5 6.7 CT8-V 119 80.6 11 109 1 37.7 ABB SACE /13

CT12 8 156.8 196 1 127.3 58.3 5.3 56.3 180 68.5 82.2 102.3 CT12-V 126 165 186 109 1 37.5 /1 ABB SACE