RODULFO Cebu, Philippines Occupation: Motor Mechanic AUGUST 22, 1974 Civil Status: Married TRADE QUALIFICATIONS: AQF Certificate III in Automotive Mechanical Technology (Light Vehicle) VETASSESS November 2013 EDUCATIONAL ATTAINMENT: Tertiary: University of Cebu Course: Marine Engineering (Incomplete) First Semester School year: 1993-1994 Vocational: College of Technological Science Cebu Formerly Cebu technical School Course: Electronics Communication Technician March 23, 1993 Secondary: Cebu Technological University Formerly: Cebu State College of Science and Technology College of Agriculture March 28, 1991 Primary: Danglag Elementary School March 1987 TRINING AND SEMINARS ATTENDED: Automotive Servicing TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITY (TESDA) Archbishop Avenue, Lahug Cebu City, 6000 Philippines Issued on October 25, 2012 and Valid Until October 25, 2017 Total Hours Training: Trade Test (588 hours) 1. 500311105 Participate in Workplace Communication 2. 500311106 Work in Team Environment 3. 500311107 Practice Career Professionalism 4. 500311107 Practice Occupational Health Safety Procedures 5. ALT723201 Apply appropriate Sealant/Adhesive 6. ALT723201 Move and Position Vehicle 7. ALT311202 Perform Mensuration and calculation 8. ALT723203 Read, Interpret and Apply Specifications and Manuals 9. ALT723204 Use and apply lubricant / coolant 10. ALT723205 Perform Shop Maintenance 11. ALT723301 Perform Diesel Engine Tune Up
12. ALT723303 Service Automotive Battery 13. ALT723304 Service Ignition System 14. ALT723305 Test and Repair Wiring/Lighting System 15. ALT723306 Perform Under chassis Preventive Maintenance 16. ALT723307 Service Starting System 17. ALT723308 Service Charging System 18. ALT723309 Service Engine Mechanical System 19. ALT723310 Service Clutch System 20. ALT723311 Service Differential and Front Axle 21. ALT723312 Service Steering System 22. ALT723313 Overhaul Manual Transmission 23. ALT723314 Service Brake System 24. ALT723315 Service Suspension System Understanding the Value of Customer Enthusiasm (VCFCO.F6W) 22 August 2012 Introduction to LMS (LMS102.01W) 16 August 2012 Steering System Operation (03510.08W) 13 August 2012 Type of training: Web Based Base Suspension System Operation (03510.05W) 12 June 2012 Tires and Wheels (13044.13T1) 29 May 2012 Wheel Alignment (03510.01W) 28 May 2012
Global Diagnostic System (GDS) 2 / MDI (16048.30W-R2) 4 April 2012 s Integrated Controls (A1801.24ME) 31 May 2012 Total Hours of Training: 24 hrs = 3 days Integrated Controls (A1801.16ME) 03 June 2011 Total Hours of Training: 1 Engine Mechanical Diagnosis and Measurement 2 (16043.51W2) Total Hours of Training: 3.5 hrs Engine Mechanical Diagnosis and Measurement 1 (16043.51W1) J-38125 Terminal Repair Kit Structure & Usage (16043.51W1) J-38125 Terminal repair kit and Usage (18043.11T1) Electrical/Electronic System Diagnosis and DMM (18043.06S-R2)
1.6L and 1.8L Engine Timing Procedure (50250.31T1) 17 October 2010 Micrometer Basics (50240.11T2) 04 August 2010 MDI & Global Diagnostic System (A1002.24ME) 22-24 July 2010 Total Hours of Training: 24 hrs = 3 days GM Difference Customer Enthusiasm (A1079.04ME) 01 May 2010 Electrical Diganosis (Part 2) (A1807.16ME) 15-16 April 2010 Total Hours of Training: 16 hrs = 2 days Electrical Diganosis (Part 1) (A1807.24ME) 08-10 April 2010 Total Hours of Training: 24 hrs =3 days GM Global Electrical Systems (18044.20W) 05 April 2010 Brake Drum Measurement (50240.34T1) 25 March 2010
Global Diagnostic System (16048.26W) 14 March 2010 Type of Training: Web Based Midtronics PSC 550 Battery Charger (50240.33T1) 02 March 2010 Tech 2 Familiarization (16048.16W-R2) 26 February 2010 Total Hours of Training: 3 hrs Tech 2 (C1635.16ME) 27-28 January 2010 Total Hours of Training: 16 hrs = 2 days Electrical/Electronics Stage 3 (18043.03W-R3) 01 October 2009 Total Hours of Training: 3 hrs Electrical/Electronics Terminals and Connectors (18043.04S) 29 September 2009 Electrical/Electronics Stage 2 (18043.02W-R4) 28 September 2009 Electrical/Electronics Stage1 (18043.01W-R4) 26 September 2009
Multiple Diagnostic Interface (MDI) Familiarization (16048.25W) 22 September 2009 Maintenance Under Car (00510.15W) 19 September 2009 Exhaust System and Service (06510.01W) 19 September 2009 SI Overview (10041.10W-R2) 19 September 2009 Maintenance Behind The Wheel (00510.10W) 15 September 2009 Maintenance Underhood (00510.05W) 15 September 2009 Maintenance Automotive Fluids (00510.01W-R2) 13 September 2009 Introduction to the GM LAAM LMS (LMS101.01W) 7 July 2009
Service Information (A1008.16ME) 5 June 2009 ESI and sources of Information (A1008.08ME) 28 May2009 Total Hours of Training: 8 hrs = 1 day Delphi Micro 64 Connectors System Service (50250.14T1) 28 May2009 GM Difference Costumer Enthusiasm (A1079.04ME) 28 May2009 EMPLOYMENT HISTORY Liberty Abu Dhabi Automobiles Co. U.A.E. December 9, 2007 Present Automotive Service Technician Working Hours per Week: 48 hrs 1. Troubleshoot Mechanical, Electrical and Engine related problems in GM Automobiles. 2. Diagnosis and repair in engine, brakes, suspension, steering gears, transfer case and differential. 3. Performed minor and major engine tune-up, inserted points cleaned and replace spark plug 4. Service tires and balance 5. Ability to work with advance tools and equipment 6. Complete preventive maintenance procedure on vehicle 7. Provide technical report for warranty documentation 8. Ensure all safety systems are in checked before performing any procedure. 9. Kept on manufacturer technical bulletins 10. Should have ability to establish and maintain relationship with others. 11. Maintained accurate hours & repair records 12. Possess of technical and perform trouble shooting abilities
13. Conduct road test to the vehicle when required & referred to the repair test technician for Existing faults AL JAZIRAH VEHICLES AGENCIES COMPANY Riyadh, Saudi Arabia. April 14, 2004 February 01, 2007 Automotive Service Technician Working Hours per Week: 48 hrs 14. Troubleshoot Mechanical, Electrical and Engine related problems in FORD automobiles. 15. Diagnosis and repair in engine, brakes, suspension, steering gears, transfer case and differential 16. Performed minor and major engine tune-up, inserted points cleaned and replace spark plug 17. Service tires and balance 18. Ability to work with advance tools and equipment 19. Complete preventive maintenance procedure on vehicle 20. Provide technical report for the warranty documentation 21. Ensure all safety systems are in checked before performing any procedure 22. For everyday problems- kept on manufacturer technical bulletins 23. Should have ability to establish and maintain relationship with others. 24. Maintained accurate hours & repair records. 25. Possess of technical and perform trouble shooting abilities. AL JOMAIH AUTOMOTIVE CO. Jeddah Saudi Arabia July 27, 1997 May 27, 2003 Auto Mechanic Working Hours per Week: 48 hrs 1. Troubleshoot Mechanical, Electrical and Engine related problems in GM automobiles 2. Diagnosis and repair in engine, brakes, suspension, steering gears and differential 3. Performed minor and major engine tune-up, inserted points cleaned and replace spark plug 4. Perform wheel alignment and service tires and wheel balancing. 5. Ability to work with advance tools and equipment 6. Complete preventive maintenance procedure on vehicle 7. Provide technical report for the warranty documentation. 8. Ensure all safety systems are in checked before performing any procedure. 9. Kept on manufacturer technical bulletins. 10. Should have ability to establish and maintain relationship with others. 11. Maintained accurate hours & repair records. 12. Possess of technical and perform trouble shooting abilities.
UP-TOWN INDUSTRIAL SALES Mandaluyong City Philippines July 16, 1995 July 26, 1997 Garage Service Technician Working Hours per Week: 48 hrs 13. Repairs automotive equipment such as computerize wheel alignment and balancer, engine analyzer, tire change, timing light, air-condition recycling machine and battery charger for cars 14. Performs installation of vehicle lifters such as two post lift, four post lift, low-rise lift and scissors lift etc. LICENSES: LIGHT WEIGHT VEHICLE (MANUAL & AUTOMATIC) Occupational Title: Driving License (United Arab Emirates) License Number: 462117 Issued By: Ministry of Interior (Sharjah Police) Occupational Title: Professional Driver s License (Philippines) License Number: G06-00-059168 Issued By: Land Transportation Office Occupational Title: Driving License (Kingdom of Saudi Arabia) License Number: 2205801836 Issued By: Kingdom of Saudi Arabia Ministry of Interior