100810-CSX-CMOS-E-2005 Automation Engineer Holds a B. Sc. in Electrical Power & Machines Engineering and has about 8 years hands-on experience in process control and automation of Rockwell Automation, GE, ABB, Yokogawa DCS and Wonderware. Good knowledge in Automation Standards, Process Control Systems, Cement, Oil & Gas, Plastic, Textiles, Power Plants. PERSONAL DATA Nationality : Egyptian Birth Date : 07/11/1982 Gender : Male Marital Status : Married Residence : Ain Shams, Cairo EDUCATION : B. Sc. in Electrical Power & Machines Engineering, Ain Shams University, 2005 : Currently studying for M. Sc. in Electrical Engineering, Ain Shams University LANGUAGES Arabic English : Native Language : Good COMPUTER SKILLS : Windows, MS Office, Internet TRAINING COURSES AND CERTIFICATIONS : National Instruments on Computer Based Measurement and Automation for Industrial Application. : Visual C#.net (Microsoft in Ain Shams University). : Telemecanique M340 PAC and Unity Pro Development Software. : Wonderware intouch 9.5 Training. : North Cairo Station Training Center (PLCs, Protections). : Military Factory #200: Automatic control, PLCs and motors. : Shoubra El-Kheima Power Station Training. : ELSEWEDY Meter Factory Training. www.egyptrol.com Page 1 of 3 Updated: Apr. 2014
CHRONOLOGICAL EXPERIENCE RECORD Employer Project Job title Job Description Employer Job title Job Description : Torque Automation Systems : Dubai and Saudi Arabia : Freelancer Senior Automation Engineer : Main experience in Automation Fields, as responsible for: Implementation Automation Systems using PLCs and RTUs (Rockwell Automation, Siemens, GE, SCADAPack and Schneider Electric). Programming, PAT, Pre-FAT, FAT, IFAT Testing, Commissioning, Start-up and Project Management Turnover. Hardware and Software Maintenance. Automation Service Engineering. Excellent Knowledge Automation Networks (DeviceNet, ControlNet, Ethernet/IP, DF1, DH+/ DH485, Vnet/IP, DNP3, ModBus, ProfiBus, ProfiNet and CANopen). : EL-SEWEDY Automation S.A.E. : Senior Automation Engineer : Main experience in Automation Fields, as responsible for: Implementation Automation Systems using PLCs (Rockwell Automation) and SCADA (RSView32, Wonderware). Programming, PAT, Pre-FAT, FAT, IFAT Testing, Commissioning and Start-up. Hardware and Software Maintenance. Automation Service Engineering. Excellent Knowledge Automation Networks (DeviceNet, ControlNet, Ethernet/IP, DF1, DH+, Field Bus and DH485). Dates : From 2006 till 2008 Employer : ASEC Automation Company (ASA) Job title : Automation Engineer Job Description : Main experience in the Automation field, new and upgrading projects, as responsible for: Design of the engineering such as sequence and layer flow sheet, general and detailed general and detailed Function Analysis, Design of function blocks and dynamic objects especially with Lafarge standard, ITC, FLS Standard and BMI. Programming level 1 and 2, FAT testing, Commissioning. Hardware and Software maintenance. Automation Services Experience: Abuljadayel SCADA Water Station Makkah in Saudi Arabia (Water): - Remote Valve chambers, ClearSCADA with DNP3 and SCADAPack ES with ISaGRAF. Hadeed District Cooling Plant SABIC Jubail in Saudi Arabia (Metals): - Redundant ControlLogix CPU, FactoryTalk View Site Edition. El Sewedy Cables Egypt in Egypt (Metals): - SLC 5/03 CPU upgrade, Panel view 550. TownGAS, GAS Stations in Egypt (Oil & GAS): www.egyptrol.com Page 2 of 3 Updated: Apr. 2014
- RSView32 Modifications, SLC 5/04. Air Liquide in Egypt (Petrochemical): - RSView32 Connectivity and Modifications. IFFCO Egypt in Egypt (Foods): - Shorting Plant (Wonderware 9.0 Recipe modifications and SQL server). PRINTX 10th of Ramadan in Egypt (Textiles): - GeFanuc Series 90-30, QuickPanel View and Proficy Machine Edition. SAFCO SABIC Jubail in Saudi Arabia (Petrochemical): - Urea Plant SAFCO #3 (Allen-Bradley PLC5 Logic modifications and Panel View). SHARQ SABIC Jubail in Saudi Arabia (Petrochemical): - Redundant Allen-Bradley PLC5 Logic modifications. Procter & Gamble (MIC) DAMM in Saudi Arabia: - ControlNet Packing Lines Allen-Bradley ControlLogix. Middle East Paper Co. (MEPCO) Jeddah in Saudi Arabia (Paper Industry): - PM3 (Boiler SCADA, Rsview32). King Faisal University (KFU) DAMM in Saudi Arabia (BMS): - Power Flex 700 AC Drive. HanKel in Egypt: - SLC500 and RSView32. Procter & Gamble Egypt in Egypt: - Motion Control services. Automation Projects Experience: Water Distribution Network Data logger Makkah in Saudi Arabia, Abuljadayel Co. for Contracting & Maintenance, 2011 (National Water Company): - Logger Type: RADCOM "Multilog Flash GSM/SMS and Multilog LX for Flow and Pressure Measurements" in 100 locations on Network. - Radcom Autocall, RadcomView, Radcom Data Generator and Radcom Setup. - GSM Modem. Buraidah Wastewater Treatment Plant Buraidah in Saudi Arabia, Waste Water Treatment Plant (2011, 2012), CIVIL WORKS COMPANY LTD, CWC/C, CWC/M and SICEB: - PLCs: Redundant ControlLogix L63, Siemens S7-200, 300, Modicon Premium TSX 57 and GE VersaMax RTU. - SCADA: FactoryTalk View Site Edition and Factory talk Historian. Gulf Pipes and Metal Forming Line #1 in Saudi Arabia, Shamrany Industrial Group, 2008 (Cut-TO-Length line LoopCo, Braner): - PLCs: CompactLogix System Allen-Bradley, L35E controller. - SCADA: RSView Studio Machine Edition (ME). - DC Drive: Fincor DC drive. Tourah Cement factory line 9 in Egypt (ABB Industrial IT system 800xA): - Design of flow sheets and sequenced flow sheets for the whole project according to ITC standard. - Raw Mills Programming of AC800M PM864 PLCs. www.egyptrol.com Page 3 of 3 Updated: Apr. 2014
- Design of the Mimics using ABB software. Fuhais Cement factory Step 3 in Jordan (ABB Industrial IT system 800xA): - Design of flow sheets and sequenced flow sheets for the whole project according to Lafarge standard. - Design of General and Detailed Functional Specifications according Lafarge standard. - Design of the Mimics using ABB software. PRINTX in Egypt (Textile & Printing Services), GeFanuc Series 90-70/30 LG MasterK300S, PMU330: - Computerized Long Textile Machine 1, 2. - Design of the Mimics using PMU-MASTER. Global Sourysco International in Egypt (OIL and GAS services), LS MasterK120S, 2006: - Computerized wire rope slings test machinery. - Design of the Mimics using Visual Basic6 SP2. Sanabis Wastewater Treatment Plant in Saudi Arabia (Waste Water Treatment Plant): - PLCs: Unitypro & M340 Schneider electric. - SCADA: Wonderware System Platform 3.0 InTouch 9.5. - Communication: by Russian Satellite AM22 between plants. TBRUK for PLASTIC Industrial in Egypt (Embedded System for Injection Plastic Machine): - Design of sequence according to BOY standard. - Design of the Mimics using Graphic Display (GLCD). - FAT tests and Commissioning. Kafr El Dawar Power Plant in Egypt (DCS Power Plant), Yokogawa DCS Centum VP. - Design of sequence according to Kafr El Dawar Power. - Design of the Mimics using Centum VP DCS. Matel Lead Factory (Hammam ind) in Egypt (Industrial HVAC Systems for Lead Furnace): - Rockwell Automation MicroLogix1200. - Programming and wiring. TECHOPLAST Arburg Plastic Machines upgrade in Egypt (Plastic industry): - PLCs: Delta DVP-SS Series. - HMI: Delta DOP-AS Series. Varta Plastic Machine upgrade in Egypt (Plastic industry): - PLCs: Cimon PLC Series. - HMI: Cimon Series. General Motors in Egypt (Automotive industry): - Rsview32ME and intouch 9.0. Field of experience : Technical skills: - PLCs: Rockwell Automation, GE (90-70, 90-30), Omron, Cimon, LSIS, Delta. www.egyptrol.com Page 4 of 3 Updated: Apr. 2014
- DCS: ABB, Yokogawa. - SCADA: Wonderware, Proficy HMI/SCADA ifix and Cimplicity, Yokogawa FastTools, Rsview32. Good knowledge in: - Automation Standards. - Process Control Systems. - Cement. - Oil & Gas. - Plastic. - Textiles. - Power Plants. Experience as Industrial Automation Trainer: - Working as Instruactor for more than 100 Engineers in fields of PLCs, SCADA and Motion Control (AC speed Drive), for example: GASCO, Petrobel, Arab Contractors, Bipharm, Elsewedy cables, Topglass and more. www.egyptrol.com Page 5 of 3 Updated: Apr. 2014