Product Catalog 2014 Ponto TM The Bone Anchored Hearing System
Contents Surgical Components... 3 Wide Ponto Implants ( 4.5 mm)... 3 Ponto Implants ( 3.75 mm)... 4 Ponto Abutments & cover screw... 4 Surgical Instruments & Equipment... 5 Disposable instruments... 5 Countersink drill guide...6 Equipment...6 Non-disposable instruments... 7 Sound Processors...8 Ponto Plus...8 Ponto Plus Power...9 Ponto & Ponto Pro... 10 Ponto Pro Power...11 Accessories... 12 Fitting & Measuring... 16 Alphabetic Index...17 Oticon Medical is in compliance with ISO 13485:2003 and Directive 93/42/EEC on Medical Devices, Annex II. For USA only: Federal law restricts this device to sale by or on the order of a medical practitioner. All products are subject to change without notice.
Surgical Components All Ponto implants have the same universal implant-abutment interface, and are therefore fully compatible with existing instruments and abutments. The wide countersinks for the Wide Ponto Implants are marked with a W to separate them from the countersinks for the 3.75 mm Ponto Implants. The guide drill is used with both the wide countersinks for the Wide Ponto Implants and the countersinks for the 3.75 mm Ponto Implants. All surgical components are delivered sterile. All abutments and pre-mounted implants have interface enabling implant stability measurements using resonance frequency analysis. Wide Ponto Implants ( 4.5 mm) M51140 Wide implant, 3 mm, with abutment, 6 mm The 3 mm implant with pre-mounted 6 mm abutment, is used in the single stage surgical procedure and consists of implant, abutment and connection screw. M51136 Wide implant, 4 mm, with abutment, 6 mm The 4 mm implant with pre-mounted 6 mm abutment, is used in the single stage surgical procedure and consists of implant, abutment and connection screw. M51141 Wide implant, 3 mm, with abutment, 9 mm The 3 mm implant with pre-mounted 9 mm abutment, is used in the single stage surgical procedure and consists of implant, abutment and connection screw. M51137 Wide implant, 4 mm, with abutment, 9 mm The 4 mm implant with pre-mounted 9 mm abutment, is used in the single stage surgical procedure and consists of implant, abutment and connection screw. M51138 Wide implant, 4 mm, with abutment, 12 mm The 4 mm implant with pre-mounted 12 mm abutment, is used in the single stage surgical procedure and consists of implant, abutment and connection screw. M51142 Wide implant, 3 mm The 3 mm implant with a pre-mounted implant adapter is used in the two stage surgical procedure in case of insufficient bone depth for the 4 mm implant. The implant adapter is a disposable item that is removed after implant insertion. M51139 Wide implant, 4 mm The 4 mm implant with a pre-mounted implant adapter is used in the two stage surgical procedure. The implant adapter is a disposable item that is removed after implant insertion. 3
Surgical Components Ponto Implants ( 3.75 mm) M50784 Implant, 3 mm, with abutment, 6 mm The 3 mm implant with pre-mounted 6 mm abutment, is used in the single stage surgical procedure and consists of implant, abutment and connection screw. M50358 Implant, 4 mm, with abutment, 6 mm The 4 mm implant with pre-mounted 6 mm abutment, is used in the single stage surgical procedure and consists of implant, abutment and connection screw. M50785 Implant, 4 mm, with abutment, 9 mm The 4 mm implant with pre-mounted 9 mm abutment, is used in the single stage surgical procedure and consists of implant, abutment and connection screw. M50319 Implant, 3 mm The 3 mm implant with a pre-mounted implant adapter is used in the two stage surgical procedure in case of insufficient bone depth for the 4 mm implant. The implant adapter is a disposable item that is removed after implant insertion. M50220 Implant, 4 mm The 4 mm implant with a pre-mounted implant adapter is used in the two stage surgical procedure. The implant adapter is a disposable item that is removed after implant insertion. Ponto Abutments & cover screw M50349 Abutment, 6 mm The 6 mm abutment is delivered with a connection screw. M50318 Abutment, 9 mm The 9 mm abutment is delivered with a connection screw. M51149 Abutment, 12 mm The 12 mm abutment is delivered with a connection screw. 4
Surgical Instruments & Equipment M50362 Angled abutment 10 The angled abutment can be used to adjust the sound processor position. The angled abutment is delivered with a connection screw and enables mounting the sound processor at an angle of 10. Note: The connection screw interface does not enable implant stability measurements. M50098 Cover screw hexagon The cover screw is used in the two stage surgical procedure or when a sleeper implant is placed. It is designed to cover the whole upper side of the implant flange and thereby safely protect the implant. Disposable instruments The disposable instruments are delivered sterile. All the drill shafts are between 26 and 30 mm long to facilitate correct orientation of the drill during the drilling procedure. M50287 Guide drill, 3-4 mm M51144 Wide countersink, 3 mm The guide drill has a removable spacer to shift between 3 and 4 mm drilling depths. The guide drill is compatible with both the wide countersinks for the wide 4.5 mm implants and the countersinks for the 3.75 mm implants. The 3 mm wide countersink is used after the initial guide drilling. It is designed to prevent from countersinking more than 0.3 mm and it creates a barely visible recess. The drill is marked with a W to indicate that it must only be used with the wide implant. M51122 Wide countersink, 4 mm The 4 mm wide countersink is used after the initial guide drilling. It is designed to prevent from countersinking more than 0.3 mm and it creates a barely visible recess. The drill is marked with a W to indicate that it must only be used with the wide implant. M50674 Countersink with stop, 3 mm The 3 mm countersink is used after the initial guide drilling. It is designed to prevent from countersinking more than 0.3 mm and it creates a flat halo-like recess. The countersink must only be used with the 3.75 mm implant M50675 Countersink with stop, 4 mm The 4 mm countersink is used after the initial guide drilling. It is designed to prevent from countersinking more than 0.3 mm and it creates a flat halo-like recess. The countersink must only be used with the 3.75 mm implant M50821 Healing cap The healing cap has a diameter of 26 mm to efficiently hold down the dressing. 5
Surgical Instruments & Equipment Wide Ponto Implants Countersink Guide Ponto Implants ( 3.75mm) Countersink Guide Wide Implant 3 mm ( 4.5) Countersink Implant 3 mm ( 3.75) Countersink M51142 Wide implant, 3 mm M51140 Wide implant, 3 mm, with abutment, 6 mm M51141 Wide implant, 3 mm, with abutment, 9 mm M51144 Wide countersink, 3 mm M50319 Implant, 3 mm M50784 Implant, 3 mm, with abutment, 6 mm M50674 Countersink with stop, 3 mm Wide Implant 4 mm ( 4.5) Countersink Implant 4 mm ( 3.75) Countersink M51139 Wide implant, 4 mm M50220 Implant, 4 mm M51136 Wide implant, 4 mm, with abutment, 6 mm M51137 Wide implant, 4 mm, with abutment, 9 mm M51122 Wide countersink, 4 mm M50358 Implant, 4 mm, with abutment, 6 mm M50785 Implant, 4 mm, with abutment, 9 mm M50675 Countersink with stop, 4 mm M51138 Wide implant, 4 mm, with abutment, 12 mm Please note: Always use a countersink that suits the implant the wide countersinks must only be used with the Wide Ponto Implants. Equipment Drilling equipment It is important that the correct type of drilling equipment is used during the surgical procedure. The unit should be able to carry out the drilling with a drill bit speed of 1500-2000 rpm and also the implant installation on a low speed setting, 15 rpm, and a torque setting between 10-50 Ncm depending on the bone quality. See Surgical manual for correct settings and procedure. We recommend the Implantmed drive unit supplied by W&H (www.wh.com) with the contra-angle handpiece 20:1. Please contact your local sales representative for more information. Resonance Frequency Analysis equipment Osstell ISQ can add important information to the evaluation of implant stability and can be used as part of an overall treatment evaluation program. The system includes the use of a SmartPeg attached to the implant or abutment. The final implant treatment decisions are the responsibility of the clinician. 6 We recommend the Osstell ISQ instrument provided by Osstell (www. osstell.com). Please contact your local sales representative for more information.
Surgical Instruments & Equipment Non-disposable Instruments M51690 Counter torque wrench M50230 Torque wrench The counter torque wrench is used for counteracting the force when tightening or unscrewing the connection screw using the screwdriver. The counter torque wrench is also used for manual tightening in the single stage procedure if needed. The torque wrench, scale 10-35 Ncm, is used to secure the correct torque when tightening the connection screw. It is used together with the screwdriver handle. M50437 Handle with screwdriver The screwdriver handle with replaceable bits can be used together with the torque wrench. It is delivered with one screwdriver machine bit. M50384 Screwdriver, machine, 35 mm M51695 Abutment inserter, machine M50386 Square fit connection, machine The screwdriver machine bit can be used with both the screwdriver handle and the drill equipment handpiece. The bit fits all the abutment connection screws and the implant adapter screws. The shaft fitting is according to ISO 1797-1. The abutment inserter is used during the single stage surgical procedure for inserting the implant with the pre-mounted abutment, using the drill equipment. The shaft has a hexagonal collar with a shaft fitting according to ISO 1797-1. The square fit connection is used for inserting the 3 and 4 mm implant with the pre-mounted implant adapter, using the drill equipment. The shaft fitting is according to ISO 1797-1. M50428 Sound processor indicator The sound processor indicator is used to mark the correct implant position on the skin. M50534 Screwdriver hexagon The screwdriver hexagon is used for connecting and disconnecting the cover screw. M50535 Ampule holder Stand to hold the sterile component ampule during surgery. M50626 Dermatome The dermatome can facilitate the initial incision and skin reduction during surgery. It creates a skin graft that is 25 mm wide; the thickness of the graft can be adjusted between 0.6-1.0 mm. M50627 Dermatome blade, 25 mm, 10 pcs. The dermatome blade is a single-use blade and is delivered sterile in a package of 10 blades. 7
Sound Processors Ponto Plus Left Right Color versions and left and right version: M51700 Ponto Plus, left, diamond black M51701 Ponto Plus, right, diamond black M51702 Ponto Plus, left, mocca brown M51703 Ponto Plus, right, mocca brown M51704 Ponto Plus, left, chroma beige M51705 Ponto Plus, right, chroma beige M51706 Ponto Plus, left, white silver M51707 Ponto Plus, right, white silver Left Right No. Ponto Plus Demo M51721 Ponto Plus Demo, left, white silver M51722 Ponto Plus Demo, right, white silver Ponto Plus is available as a fully working demo version for training and testing. It has Demo printed on it for ease of identification. 8
Sound Processors Ponto Plus Power Left Right Color versions and left and right version: M51730 Ponto Plus Power, left, diamond black M51731 Ponto Plus Power, right, diamond black M51732 Ponto Plus Power, left, mocca brown M51733 Ponto Plus Power, right, mocca brown M51734 Ponto Plus Power, left, chroma beige M51735 Ponto Plus Power, right, chroma beige M51736 Ponto Plus Power, left, white silver M51737 Ponto Plus Power, right, white silver Left Right No. Ponto Plus Power Demo M51752 Ponto Plus Power Demo, left, white silver M51753 Ponto Plus Power Demo, right, white silver Ponto Plus Power is available as a fully working demo version for training and testing. It has Demo printed on it for ease of identification 9
Sound Processors Ponto & Ponto Pro Left Right Color versions and left and right version: 130-00-112-00 Ponto, left, diamond black 130-00-122-00 Ponto, right, diamond black 130-00-212-00 Ponto Pro, left, diamond black 130-00-222-00 Ponto Pro, right, diamond black 130-00-111-00 Ponto, left, mocca brown 130-00-121-00 Ponto, right, mocca brown 130-00-211-00 Ponto Pro, left, mocca brown 130-00-221-00 Ponto Pro, right, mocca brown 130-00-110-00 Ponto, left, chroma beige 130-00-120-00 Ponto, right, chroma beige 130-00-210-00 Ponto Pro, left, chroma beige 130-00-220-00 Ponto Pro, right, chroma beige 130-00-113-00 Ponto, left, white silver 130-00-123-00 Ponto, right, white silver 130-00-213-00 Ponto Pro, left, white silver 130-00-223-00 Ponto Pro, right, white silver Left Right No. Ponto Pro Demo No. Ponto Pro Demo 130-00-911-00 Ponto Pro Demo, left, mocca brown 130-00-910-00 Ponto Pro Demo, left, chroma beige 130-00-921-00 Ponto Pro Demo, right, mocca brown 130-00-920-00 Ponto Pro Demo, right, chroma beige Ponto Pro is available as a fully working demo version for training and testing. It has Demo printed on it for ease of identification. 10
Sound Processors Ponto Pro Power Left Right Color versions and left and right version: M50677 Ponto Pro Power, left, diamond black M50676 Ponto Pro Power, right, diamond black M50873 Ponto Pro Power, left, mocca brown M50872 Ponto Pro Power, right, mocca brown M50875 Ponto Pro Power, left, chroma beige M50874 Ponto Pro Power, right, chroma beige M50903 Ponto Pro Power, left, white silver M50902 Ponto Pro Power, right, white silver Left Right No. Ponto Pro Power Demo No. Ponto Pro Power Demo M50882 Ponto Pro Power Demo, left, mocca brown M50884 Ponto Pro Power Demo, left, chroma beige M50881 Ponto Pro Power Demo, right, mocca brown M50883 Ponto Pro Power Demo, right, chroma beige Ponto Pro Power is available as a fully working demo version for training and testing. It has Demo printed on it for ease of identification. 11
Accessories Accessories The Ponto System offers a wide range of accessories for specific patient requirements as well as for evaluation and testing situations. 137078 Ponto Streamer, black 137080 Ponto Streamer, white The Ponto Streamer is a gateway to a range of different electronic devices. Different audio sources can be transmitted through the Ponto Streamer to your sound processor. The Ponto Streamer can also be used as a remote control to adjust the volume and change program in the sound processor. For Ponto Plus and Ponto Plus Power sound processors only. 137077 Ponto Streamer Demo, black The Ponto Streamer is available as a fully working demo version for training and testing. It has Demo printed on the back cover for ease of identification and it is available in black. For Ponto Plus and Ponto Plus Power sound processors only. DEMO 124771 ConnectLine TV adapter The ConnectLine TV Adapter can be connected to a TV and transmit the TV sound to the sound processor via Ponto Streamer. Please contact your local sales representative for more information about compatibility and other information. For Ponto Plus and Ponto Plus Power sound processors only. Only through Ponto Streamer. 108402 ConnectLine microphone The ConnectLine microphone is a discreet clip-on microphone that can connect wirelessly to the Ponto Streamer, allowing the conversation partner s voice to be heard in the sound processor. For Ponto Plus and Ponto Plus Power sound processors only. Only through Ponto Streamer.* ConnectLine phone adapter The ConnectLine phone adapter can be connected to a telephone (private/domestic analog) and transmit the sound from the telephone to the sound processor via Ponto Streamer. In this way the sound processor in combination with Ponto Streamer is turned into a wireless headset. For Ponto Plus and Ponto Plus Power sound processors only. Only through Ponto Streamer.* FM receiver The Oticon Amigo R2 can be used with the Ponto Streamer. With this multi-channel FM receiver, the user can benefit from the advanced solutions offered by the Amigo receiver and transmitters. Phonak also distributes an FM solution that can be used with the Ponto Streamer. For Ponto Plus and Ponto Plus Power sound processors only. Only through Ponto Streamer.* 12 *Please contact your local sales representative for more information.
Accessories Accessories M50446 Telecoil The plug-in telecoil unit is designed to improve sound quality and speech understanding within areas that have a telecoil loop installed or for users with an FM neckloop receiver. For Ponto, Ponto Pro and Ponto Pro Power sound processors only. M50377 Audio adapter The audio adapter is equipped with an isolation transformer allowing the user to connect the sound processor to external equipment such as stereos, MP3-players and television sets. For Ponto, Ponto Pro and Ponto Pro Power sound processors only. FM receiver The multi-channel FM receiver, Oticon Amigo R2BA, allows the user to benefit from the advanced solutions offered by the Amigo receiver and transmitters. Phonak also distributes an FM solution that can be used. For Ponto, Ponto Pro and Ponto Pro Power sound processors only.* M50029 Safety line The safety line may be attached to the sound processor and the patient s clothing to reduce risk of loss or damage after first fitting or during physical activity. Drying tub The drying tub from Oticon can be used with a drying capsule for drying the sound processor, mainly in countries with high humidity.* Drying capsules The drying capsules from Oticon can be used with the drying tub for drying the sound processor, mainly in countries with high humidity. 6 pieces.* M50294 Abutment cover, black M50290 Abutment cover, beige M50030 Cleaning brush M51177 Ponto Care Kit The abutment cover is used to cover the abutment when the sound processor is not connected. The abutment cover is used to cover the abutment when the sound processor is not connected. The soft cleaning brush is used to clean the outside and inside of the abutment. The Ponto Care Kit can be used to facilitate cleaning of the Ponto System and to establish a good daily aftercare routine. *Please contact your local sales representative for more information. 13
Accessories Accessories M51817 Stickers The adhesive stickers can easily be applied to the sound processor to customize its appearance. M51845 Skins for Ponto, Ponto Pro and Ponto Plus, left M51847 Skins for Ponto Pro Power and Ponto Plus Power, left M51844 Skins for Ponto, Ponto Pro and Ponto Plus, right M51846 Skins for Ponto Pro Power and Ponto Plus Power, right The skin can easily be attached to change the appearance of the sound processor. The set consists of five skins in different colors: purple, light blue, red, green and pink. Please note: Sound processor not included. M50640 Soft band, red, unilateral M50739 Soft band, red, bilateral M50551 Soft band, pink, unilateral M50734 Soft band, pink, bilateral M50612 Soft band, light blue, unilateral M50735 Soft band, light blue, bilateral M50639 Soft band, navy blue, unilateral M50738 Soft band, navy blue, bilateral M50638 Soft band, beige, unilateral M50737 Soft band, beige, bilateral M50637 Soft band, black, unilateral M50736 Soft band, black, bilateral The soft band is primarily intended for infants and children who do not yet have (or for some reason cannot get) an implant, but who nevertheless can benefit from a bone conduction solution. The soft band consists of a latex-free adjustable elastic band with a plastic connector disc for Oticon Medical sound processors. The unilateral soft band can be adjusted in length from 30 cm to 50 cm. The soft band has a built-in safety feature which is designed to release the soft band if necessary. 14
Accessories Accessories M51784 Sound processor dummy with coupling The Sound processor dummy with coupling can be used to demonstrate and practice connection and disconnection of the Ponto sound processors. M51818 Ponto Plus Color sample kit The kit contains four color samples of Ponto Plus and Ponto Plus Power. Designed to facilitate demonstration of the different color options available. M51117 Ponto Pro Color sample kit The kit contains four color samples of Ponto, Ponto Pro and Ponto Pro Power. Designed to facilitate demonstration of the different color options available. M50006 Xpress The Xpress unit may facilitate the connection and disconnection of the sound processor. M50302 Test rod The test rod is used for listening, testing and demonstrating the sound processor without connecting it to an abutment. Simply connect the sound processor to the test rod and press it against the head. M50308 Head band The head band can be used during pre-operative patient evaluation and also by patients who are unsuitable for implantation but who can gain from using the Ponto sound processors as a traditional bone conductor. M50104 Test band The test band is used for short term pre-operative patient evaluation and testing of the Ponto sound processors. M50462 Test stand The test stand has a removable test rod that can be used to demonstrate and practice connection and disconnection of the Ponto sound processors. 15
Fitting & Measuring Fitting Software Oticon Medical AB Ekonomivägen 2 SE-436 33 Askim Sweden www.oticonmedical.com M51792 / 2013.08 Genie Medical Ponto Plus Ponto Plus Power Ponto Ponto Pro Ponto Pro Power Ponto Streamer Genie Medical 2013.1 M50504 Genie Medical fitting software The Ponto, Ponto Pro, Ponto Pro Power, Ponto Plus, Ponto Plus Power and Ponto Streamer may be programmed using the Genie Medical 2013.1, or later version, fitting software. The software can be used stand-alone or with NOAH. Oticon #3, HI-PRO #3 or NOAHlink #2 programming cable is used to program all sound processors. Please see Genie Medical or contact your local sales representative for more information about how to order the programming cable. Skull Simulator Skull Simulator (SKS10) Interacoustics have developed a special skull simulator coupler for the Affinity. It offers clinicians the possibility of performing technical measurements on the sound processor. Please contact your local sales representative for more information. 16
Alphabetical Index Article Name Article No. Page Abutment, 6 mm M50349 4 Abutment, 9 mm M50318 4 Abutment, 12 mm M51149 4 Abutment cover, beige M50290 13 Abutment cover, black M50294 13 Abutment inserter, machine M51695 7 Ampule holder M50535 7 Angled abutment 10 M50362 5 Audio adapter M50377 13 Cleaning brush M50030 13 Color sample kit, Ponto, Ponto Pro & Ponto Pro Power M51117 15 Color sample kit, Ponto Plus & Ponto Plus Power M51818 15 ConnectLine TV adapter 124771 12 ConnectLine microphone 108402 12 ConnectLine phone adapter 12 Counter torque wrench M51690 7 Countersink with stop, 3 mm M50674 5 Countersink with stop, 4 mm M50675 5 Cover screw hexagon M50098 5 Dermatome M50626 7 Dermatome blade, 25 mm, 10 pcs M50627 7 Drying capsules 13 Drying tub 13 FM receiver, Ponto, Ponto Pro & Ponto Pro Power 13 FM receiver, Ponto Plus & Ponto Plus Power 12 Genie Medical M50504 16 Guide drill, 3-4 mm M50287 5 Handle with screwdriver M50437 7 Head band M50308 15 Healing cap M50821 5 Implant, 3 mm M50319 4 Implant, 3 mm, with abutment, 6 mm M50784 4 Implant, 4 mm M50220 4 Implant, 4 mm, with abutment, 6 mm M50358 4 Implant, 4 mm, with abutment, 9 mm M50785 4 Ponto, left, chroma beige 130-00-110-00 10 Ponto, left, diamond black 130-00-112-00 10 Ponto, left, mocca brown 130-00-111-00 10 Ponto, left, white silver 130-00-113-00 10 Ponto, right, chroma beige 130-00-120-00 10 Ponto, right, diamond black 130-00-122-00 10 Ponto, right, mocca brown 130-00-121-00 10 Ponto, right, white silver 130-00-123-00 10 Ponto Care Kit M51177 13 Ponto Plus, left, chroma beige M51704 8 Ponto Plus, left, diamond black M51700 8 Ponto Plus, left, mocca brown M51702 8 Ponto Plus, left, white silver M51706 8 Ponto Plus, right, chroma beige M51705 8 Ponto Plus, right, diamond black M51701 8 Ponto Plus, right, mocca brown M51703 8 Ponto Plus, right, white silver M51707 8 Ponto Plus Demo, left, white silver M51721 8 Article Name Article No. Page Ponto Plus Demo, right, white silver M51722 8 Ponto Plus Power, left, chroma beige M51734 9 Ponto Plus Power, left, diamond black M51730 9 Ponto Plus Power, left, mocca brown M51732 9 Ponto Plus Power, left, white silver M51736 9 Ponto Plus Power, right, chroma beige M51735 9 Ponto Plus Power, right, diamond black M51731 9 Ponto Plus Power, right, mocca brown M51733 9 Ponto Plus Power, right, white silver M51737 9 Ponto Plus Power Demo, left, white silver M51752 9 Ponto Plus Power Demo, right, white silver M51753 9 Ponto Pro, left, chroma beige 130-00-210-00 10 Ponto Pro, left, diamond black 130-00-212-00 10 Ponto Pro, left, mocca brown 130-00-211-00 10 Ponto Pro, left, white silver 130-00-213-00 10 Ponto Pro, right, chroma beige 130-00-220-00 10 Ponto Pro, right, diamond black 130-00-222-00 10 Ponto Pro, right, mocca brown 130-00-221-00 10 Ponto Pro, right, white silver 130-00-223-00 10 Ponto Pro Demo, left, chroma beige 130-00-910-00 10 Ponto Pro Demo, left, mocca brown 130-00-911-00 10 Ponto Pro Demo, right, chroma beige 130-00-920-00 10 Ponto Pro Demo, right, mocca brown 130-00-921-00 10 Ponto Pro Power, left, chroma beige M50875 11 Ponto Pro Power, left, diamond black M50677 11 Ponto Pro Power, left, mocca brown M50873 11 Ponto Pro Power, left, white silver M50903 11 Ponto Pro Power, right, chroma beige M50874 11 Ponto Pro Power, right, diamond black M50676 11 Ponto Pro Power, right, mocca brown M50872 11 Ponto Pro Power, right, white silver M50902 11 Ponto Pro Power Demo, left, chroma beige M50884 11 Ponto Pro Power Demo, left, mocca brown M50882 11 Ponto Pro Power Demo, right, chroma beige M50883 11 Ponto Pro Power Demo, right, mocca brown M50881 11 Ponto Streamer, black 137078 12 Ponto Streamer, white 137080 12 Ponto Streamer Demo, black 137077 12 Safety line M50029 13 Screwdriver hexagon M50534 7 Screwdriver, machine, 35 mm M50384 7 Skins for Ponto, Ponto Pro and Ponto Plus, left M51845 14 Skins for Ponto Pro Power and Ponto Plus Power, left M51847 14 Skins for Ponto, Ponto Pro and Ponto Plus, right M51844 14 Skins for Ponto Pro Power and Ponto Plus Power, right M51846 14 Skull Simulator (SKS10) 16 Sound processor dummy with coupling M51784 15 Sound processor indicator M50428 7 Soft band, beige, bilateral M50737 14 Soft band, beige, unilateral M50638 14 Soft band, black, bilateral M50736 14 Soft band, black, unilateral M50637 14 Soft band, light blue, bilateral M50735 14 17
Alphabetical Index Article Name Article No. Page Soft band, light blue, unilateral M50612 14 Soft band, navy blue, bilateral M50738 14 Soft band, navy blue, unilateral M50639 14 Soft band, pink, bilateral M50734 14 Soft band, pink, unilateral M50551 14 Soft band, red, bilateral M50739 14 Soft band, red, unilateral M50640 14 Square fit connection, machine M50386 7 Stickers M51817 14 Telecoil M50446 13 Test band M50104 15 Test rod M50302 15 Test stand M50462 15 Torque wrench M50230 7 Wide countersink, 3 mm M51144 5 Wide countersink, 4 mm M51122 5 Wide implant, 3 mm M51142 3 Wide implant, 3 mm, with abutment, 6 mm M51140 3 Wide implant, 3 mm, with abutment, 9 mm M51141 3 Wide implant, 4 mm M51139 3 Wide implant, 4 mm, with abutment, 6 mm M51136 3 Wide implant, 4 mm, with abutment, 9 mm M51137 3 Wide implant, 4 mm, with abutment, 12 mm M51138 3 Xpress M50006 15 18
Office locations Manufacturer Oticon Medical AB Ekonomivägen 2 SE-436 33 Askim Sweden Phone: +46 31 748 61 00 Email: info@oticonmedical.com Americas USA Oticon Medical LLC Somerset, NJ 08873 Phone: 1-888-277-8014 Email: info@oticonmedicalusa.com Canada Oticon Medical/Oticon Canada Ltd. Mississauga, Ontario, L5N 0A6 Phone: 1-800-263-8700 Email: info@oticonmedical.ca Argentina Audisonic S.A. 1199 Buenos Aires Phone: +54 11 4981-4205 Email: info@oticonmedical.com.ar Brazil Oticon Medical Ltda. Saúde, 20081-310 Rio de Janeiro Phone: +55 21 21049100 Email: info@oticonmedical.com.br Colombia CEAN Ltda. A.A. 50868 Bogotá D.C Phone: +57 1 245 8885 Email: info@oticonmedical.co Europe Belgium Oticon Medical NL-1180 AP Amstelveen Phone: +31 20 345 08 07 Email: info@oticonmedical.nl Germany Oticon Medical/Oticon GmbH D-22525 Hamburg Phone: +49 40 84 88 84 66 Email: info@oticonmedical.de Poland Oticon Polska Sp. z o.o. PL-00-499 Warszawa Phone: +48 22 622 14 44 Email: info@oticonmedical.pl Russia Representation office of Oticon A/S RF-119270 Moscow Phone: +7 495 926 68 32 Email: info@oticonmedical.ru Denmark Oticon Medical DK-2765 Smørum Phone: +45 39 17 71 00 Email: info@oticonmedical.dk Italy Oticon Medical/Oticon Italia Srl IT-50127 Firenze Phone: +39 055 32 60 411 Email: info@oticonmedical.it Spain GAES E-08005 Barcelona Phone: +34 93 3005800 Website: www.gaes.es Turkey Ses İşitme Cihazları sanayi ve Ticaret A.Ş 34750 İstanbul Phone: + 90 216-577 30 30 Email: info@oticonmedical.com.tr Finland Oticon Medical SF-00880 Helsinki Phone: +358 9 2786 200 Email: info@oticonmedical.fi The Netherlands Oticon Medical NL-1180 AP Amstelveen Phone: +31 20 345 08 07 Email: info@oticonmedical.nl Sweden Oticon Medical S-103 13 Stockholm Phone: +46 8 545 22 750 Email: info@oticonmedical.se United Kingdom Oticon Medical Hamilton, ML3 7QE Phone: +44 1698 208 234 Email: info@oticonmedical.co.uk France Oticon Medical F-92635 Gennevilliers Cedex Phone: +33 1 46 24 75 34 Email: info@oticonmedical.fr Norway Oticon Medical N-0103 Oslo Phone: +47 23 25 61 00 Email: info@oticonmedical.no Switzerland Oticon Medical/Oticon S.A CH-3018 Bern Phone +41 31 990 34 00 Email: info@oticonmedical.ch Africa South Africa Oticon Medical Constantia Kloof 1709, Gauteng Phone: +27 11 675 6104 Email: info@oticonmedical.co.za Asia Pacific Australia Oticon Medical/Oticon Australia Pty Ltd. North Ryde NSW 2113 Phone: +61 2 9857 8288 Email: info@oticonmedical.com.au Middle East Israel Medton Ltd. Tel-Aviv 63431 Phone: +972 3 620 3992 Email: info@oticonmedical.co.il New Zealand Oticon Medical/Oticon New Zealand Ltd. Wellington 6021 Phone: +64 4 473 3330 Email: info@oticonmedical.co.nz
About Oticon Medical Oticon Medical combines more than a century of experience in audiology and sound processing with decades of pioneering experience in hearing implant technology. As a business within the William Demant Group, Oticon Medical enjoys valuable resources including the power to invest in the further development of hearing implant systems and unique access to knowledge, resources and technology of leading hearing solution manufacturer Oticon. Oticon Medical s People First philosophy is a direct heritage from Oticon. Every product Oticon Medical creates from sound processors and surgical components to fitting, counseling and support tools is designed with user needs in mind. With a strong focus on creating lifelong patient outcomes, Oticon Medical s starting point will always be the patient s everyday challenges and how to overcome them. Oticon Medical aims to empower all users of hearing implant systems to realize their full potential and live life to the fullest. www.oticonmedical.com M52050_US / 2013.10 Manufacturer: Oticon Medical AB Ekonomivägen 2 SE-436 33 Askim Sweden Phone: +46 31 748 61 00 Email: info@oticonmedical.com