Pen Drive 2.0 Specification Table of Contents A. General Description..2 B. Controller Outline..3 C. Features.3 D. Capacity Specification.4 E. Power Consumption.5 F. Absolute Maximum Rating...5 G. Installation Procedures 6 11 / 2003 1
A. General Description: The Pen Drive 2.0 is a removable flash disk drive with USB connection and can support up to 1GB disk space, which is 711 pieces 1.44MB floppy disk. Pen Drive 2.0 is compatible with USB 2.0 specification and it is also compatible with USB 1.1 specification. Pen Drive is a plug and play device, simply plug it into any USB port and it will automatically detected by the computer as another drive. Now you can read, write, copy, delete and move data from your hard disk drive to Pen Drive or from Pen Drive to your hard disk drive with the high speed of USB 2.0. Pen Drive is so compact that you can take it with you anywhere in your pocket. It comes in various storage capacities, 32MB, 64MB, 128MB, 256MB, 512MB and 1GB. Now, you don t have to carry a laptop computer with you to work if you have access to a computer. Bring your data only. Moreover, Pen Drive does not require any battery or software drivers (driverless in Windows ME, Windows 2000, Windows XP, Mac 8.6, Max 9.x, Mac 10.x and Linux Kernel 2.4.0 or above) nor cables, and is compatible with any desktop or notebook computers with USB port. Experience the light weighted, compact design, high performance and fast data transfer with Pen Drive 2.0. 2
B. Controller Outline: The PS3001 & PD720130 USB controllers are the best solution for USB Flash Memory Storage Devices. It is the most effective way to transfer files between the NAND Flash Memory and the host computer through USB 1.1 / 2.0 interface. With the USB plug and play function and driverless solution, these devices provide not only easy to install, but also fast, easy to use and low cost way for users. No miscellaneous installation, no external power is required, just plug and play. C. Features: 1. Compatible with USB specification revision 2.0. 2. USB specification revision 1.1 compatible. 3. Built-in USB 2.0-to-Flash interface controller with bulk-only transport of USB mass storage classsupport PIO mode 4. 4. Support Toshiba & Samsung NAND flash memory of 32Mbit, 64Mbit, 128Mbit, 256Mbit, 512Mbit and 1Gbit. 5. Capacity available in 32MB, 64MB, 128MB, 256MB,512MB and 1GB. 6. Support Windows 98 / 98 SE (with device driver) 7. Support Linux Kernel version 2.4.10 or above without driver. 8. Support Windows ME, Windows 2000 and Windows XP without driver. 9. LED indicator when Pen Drive 2.0 is in use. 10. Write/Delete protection switch. Protect you from accidentally deleting data on Pen Drive 2.0. 11. Hot Plug & Play - Enable you to install Pen Drive 2.0 at anytime. 12. Durable solid-state storage data retention for at least 10 years. 13. No external power is required - DC 4.5V ~ 5.5V from USB port. 14. Shock resistance: 1000G (maximum) 15. Power consumption < 145mA when in use. 16. Altitude: 80,000 feet (relative to sea level) 3
17. Acoustic noise: 0 db (at one meter) 18. Weight: 22g 19. Operating Temperature: 0 C ~ 70 C 20. Vibration: 15 G peak to peak max D. Capacity Specification: Product Models Capacity (Win 98 SE) Before Format After Format Pen Drive 2.0-32MB 32.00MB ± 30.80MB Pen Drive 2.0-64MB 64.00MB ± 61.60MB Pen Drive 2.0-128MB 128.00MB ± 123.00MB Pen Drive 2.0-256MB 256.00MB ± 247.00MB Pen Drive 2.0-512MB 512.00MB ± 493.00MB Pen Drive 2.0 1GB 1024.00MB ± 987.00MB 4
E. Power Consumption: DC Input Voltage: 5.0V± 10% Current (maximum average value): Sleep: Read: Write Stand By: 3 ma 100 ma 145 ma 3 ma F. Absolute Maximum Ratings: Item Symbol Parameter Min. Max. Unit 1 VDD-VSS DC Power Supply 0.3 +7.0 V 2 VIN Input Voltage VSS-0.3 VDD+0.3 V 3 Ta 4 Tst Operating Temperature Storage Temperature 0 70 C 20 80 C 5
G. Installation Procedure: G.1 Windows ME, Windows 2000, Windows XP No driver is required. These Windows operating systems have built-in driver to support Pen Drive 2.0, but you will need to install USB 2.0 driver for the motherboard first, before the motherboard can support USB 2.0; then, simply insert Pen Drive 2.0 into the USB port in either desktop PC or notebook computer. You will find a new drive icon (Removable Drive) shown in the My Computer window. G.2 Windows 98/98 SE (Second Edition) (1) Install USB 2.0 driver for motherboard (2) Follow the installation guide and install driver for Pen Drive 2.0 (3) Re-start the machine before plug in the Pen Drive 2.0 G.3 Mac OS There are not any USB 2.0 hardware available yet for Mac users, in other words, Mac does not support USB 2.0. However, users can still use Pen Drive 2.0 in Mac machines, but it will only have the performance of the USB 1.1. You can use the Pen Drive 2.0 in the following OS s. (1) Mac 8.6 (the very last version of 8.6 only) (2) Mac 9.x (3) Mac 10.x No driver installation is require, operating system will pick up the Pen Drive 2.0 automatically. G.4 Linux Kernel 2.4.0 or above can support Pen Drive 2.0 in USB 1.1 specification and performance. Kernel 2.4.10 or above will support Pen Drive 2.0 in USB 2.0 specification and performance. 6