CLASS D POWER AMPLIFIERS

2015

CLASS D POWER AMPLIFIERS

ETAPAS DE POTENCIA/ POWER AMPLIFIERS CLASS D 3rd. GENERATION / DSP MUSICSON ha desarrollado una gama completa de etapas de potencia de clase D de tercera generación con fuente de alimentación universal con selección automática de 85 268VAC ; 50/60Hz. Todos los modelos incluyen un procesador DSP con conexión de Ethernet y 96Khz. de Frecuencia de muestreo, que se puede gestionar desde su propio display o con ordenador externo. MUSICSON has developed a new complete power amplifier range 3Rd. Generation Class D modules with Universal power supply 85-268VAC ; 50/60Hz. All those models with DSP Ethernet connection (96Khz. Sampling rate ) able to be managed from Its own display or external computer. Etapas de Potencia controladas por Uno o Dos DSP / Single/Double DSP Controlled Power Amplifiers. Fuente de Alimentación Universal / Universal Switch Mode Power Supply Factor Damping Mayor a 1000 / Damping Factor over 1000 Total Auto-Protección / Fully self-protected Frecuencia de Sampleo de 96Khz. / 96KHz DSP sampling Frequency Procesador Digital de 64Bit / Mixed-mode 64 bits digital processing Sistema de Monitorización y Gestión para PC y MAC / User PC MAC and Windows Monitoring and Control Software Capacidad para 80 Prests / Up to 80 Factory Presets MX Series Powered Loudspeaker Management system features the latest 3 rd generation Class D technology for pro-audio amplification delivering highest dynamic range and the lowest distortion. The Universal Switch Mode Power Supply includes an automatic AC voltage selection with an operation range from 85V to 268V delivering consistent power world-wide, fully self-protected. All MX Series power Amplifiers feature a single or double (depending on amplifier model) 96KHz sample rate, 64 bits Input DSP module with high quality A/D D/A converters. Input DSP modules have analogue Input/Link XLRs connector as well as Remote Control and Monitoring capabilities through Ethernet interface in a Star Network configuration. MX Series amplifiers can match with any kind of professional sound system by routing input signals in Dsp boards: from standard full-range cabinets to more sophisticated multi-way systems. Digital AES/EBU input signals are available under specific customer order. MUSICSON DSP CONTROL SOFTWARE, supplied with MX Series Amplifier, allows user: 1.- On-Line real-time INPUT PARAMETERS CONTROL over all MX Series Amplifiers connected in the network: X-Over and Equalization filters, Input signal Limiter and Compressor, Input signal Delay up to 275 meters, FACTORY PRESETS loading and GROUPING Functions. 2.- On-Line Real-Time Input/Output Signals and Limiters Monitoring, as well as each Output Load Impedance and Power modules Temperature. MX Series Power amplifiers feature 1 or 2 front panel displays depending on model and number of Input DSP boards, blue characters, with a precise information about Factory presets and system parameters adjustments, together with an encoder to control system presets and 5 led s with each channel Input signal level information. MUSICSON DSP CONTROL SOFTWARE (MDCS) MANAGEMENT MX-8000D amplifier is fully equipped from MUSICSON with Ethernet solution via RJ45 connectors in its back panel as well as DSP COMMAND CENTER SOFTWARE for network capabilities to enable complete filters configuration, control, convenient cabinets grouping and monitoring solutions. With its intuitive and easy-to-use graphical interface, Musicson DSP Control Software provides remote access to load also FACTORY or USER PRESETS. Each MX-8000D channel must be connected to a 100BaseT Ethernet switch using a standard CAT-5 cable. Personal Computer to run control with Musicson Dsp Control Software must also be Ethernet connected to the switch or wireless by using an access point on the same network. Remote Input and Outputs Level signal monitoring including limiting and peaking activity. Input Gain Control from MUTE to +12dB. Details inform about: - Power module temperature - Real-time load Impedance in each power amplifier output. User can store and load its own Presets with all necessary information for any speakers system. Up to 80 Factory Presets can be stored for an instant recall from MX Series amplifiers front panel display controls. * Up to 10 Optimization filters ( including X-Over Low-Pass and High-Pass ) in each MX Series Channel. * Available filters types are: Bell, Notch, Allpass, Low-Shelf, High-Shelf, Band-Pass, High-Pass and Low-Pass * Input Signal Delay up to 800ms ( 275 meters ). * Input Signal Limiter and Compressor. * Butterworth, Bessel and Linkwitz-Riley Low-Pass and High-Pass filters. * Advanced Grouping Functions are also available in Musicson Dsp Control Software for controlling multiple systems saving systems configuring time and reducing risks of errors.

PROCESADOR DE SEÑAL / SIGNAL PROCESSOR Procesador DSP / DSP processing 96KHz sample rate, Mixed-mode 64 bit DSP for more accurate operations Latencia / latency 600 µµs Conectores de señal / Signal connectors XLR Female / XLR Male ( pass-through ) Nivel de entrada nominal / nominal imput level +6dBu Nivel máximo de entrada / max. imput level +23dBu Conector Red / network connectors Ethercon RJ/45, Cat-5 and USB Tipo de Red / network 10/100Mb Ethernet STAR configuration Control remoto / remote control Via Display and PC ( User Software included ) Control Red / Network control Input Level, Mute, Input delay ( up to 800ms ), Input Limiter, Input/Output signals monitor Rango dinámico / dinamic range 120dB ( Input ) / 117dB ( Outputs ) MODULO DE POTENCIA / POWER MODULE ( Dual Input DSP ) MODELO / MODEL NUMBER MX-8000D (8000W Continous ) MX-3200D (3200W Continous ) REF. NUMBER 9000.05.20 9000.05.22 amplificación / amplification 2 X 2400W + 2 X 800W + 2 X 800W 2 X DSP 800W X 4 CHANNEL 2 X DSP Modulo / Module 3rd generation Class D module, full bandwith PWM modulator with ultra low distortion Voltaje de salida / output voltage LF: 160Vp / MF: 80Vp / HF: 80Vp loaded S/N Ratio Better than 120dB ( A-weighted, 20Hz 20KHz, 8 OHM load ) Circuitos de protección / Protection circuits Tensión alimentación / operation voltage Input Limiter, Short-circuit, DC of Output, under&over voltage, Temperature Universal Mains, Automatic selection 85 268VAC 50/60Hz Peso / Weight Kg. 14.20 12.00 Dimensiones / Dimensions 2 Rack Units High MODULO DE POTENCIA / POWER MODULE ( Single Input DSP ) MODELO / MODEL NUMBER MX-1600D (1600W Continous ) MX-5000D (4800W Continous ) amplificación / amplification 800W + 800W + DSP 2500W + 2500W + DSP Modulo / Module 3rd generation Class D module, full bandwith PWM modulator with ultra low distortion Voltaje de salida / output voltage LF: 160Vp / MF: 80Vp / HF: 80Vp loaded S/N Ratio Better than 120dB ( A-weighted, 20Hz 20KHz, 8 OHM load ) Circuitos de protección / Protection circuits Tensión alimentación / operation voltage Input Limiter, Short-circuit, DC of Output, under&over voltage, Temperature Universal Mains, Automatic selection 85 268VAC 50/60Hz Peso / Weight Kg. 11.50 13 Dimensiones / Dimensions 2 Rack Units HIgh