BIS Gulv / Radiator Beslag

O BIS Gulv / Radiator Beslag BIS Manifold Fixings BIS Manifold Fixing 2 BIS Pipe Protection BIS Protection Plate BIS Two-Part Floor Bend BIS Floor Bend BIS Bend Guider BIS Protective Pipe BIS PE Flexible Pipe Sleeve 3 4 5 6 7 8 BIS Rørbærer BIS Dobbeltrørbærer BIS Shouldered Masonry Nail for BIS Floor Clamp BIS Plug Clamp BIS Plug Clamp BIS Tacker System BIS Tacker Clamp BIS Cast-in Pipe Clamp 9 10 11 12 13 14 15 BIS Rosettes BIS Rosette BIS Double Rosette 16 17 BIS Supports for Wall-Mounted Gas Heaters BIS Gas Heater Support 18 BIS Panel Radiator Fixings BIS Fixing Set for Isolated Radiator (OS1/ZVH) BIS Fixing Set for Radiator (OS1/ZVH) BIS Panel Radiator Foot 19 20 21 BIS Ribbed Radiator Fixings BIS Ribbed Radiator Foot BIS Side Holder BIS Radiator Hanging Bracket 22 23 24

O BIS Gulv / Radiator Beslag BIS Manifold Fixing fixing for manifold-units Ø 3/4-1.1/2" (26,9-48,3 mm) (O 05 05) materiale: stål elforzinket sound proofing lining made of natural rubber, black lydisolerende indlæg i henhold til DIN 4109 Art.nr. D D Model Pakke1 (mm) (") 394 4 001 26,9 ¾ Enkel 50 394 4 002 34,0 1 Enkel 50 394 4 007 48,3 1½ Enkel 40 394 3 227 26,9 ¾ Dobbelt 25 394 4 027 48,3 1½ Dobbelt 25 Other types on request. Supplement 3 BIS Protection Plate 4 BIS Two-Part Floor Bend

BIS Gulv / Radiator Beslag O BIS Protection Plate pipe protection (O 10 05) to protect hidden pipework after pouring materiale: stål processing floor pre-galvaniseret protection of plastic pipes from screws or nails Art.nr. Pakke1 391 5 001 25

O BIS Gulv / Radiator Beslag BIS Two-Part Floor Bend (O 10 10) guiding of plastic floor pipe 12 mm two-part floor bend protects the pipe against mechanical damage ('buckle') for pipe sleeve up to Ø 25 mm with perforation line for separation into 2 single floor bends distance strip simplifies setting of distance between wall and bend double eye to fix centre distance during casting foot plate with dove tail: increases centre distance from 35 to 50 mm by switching the left and right floor bend upperpart easily tackable to bottomplate materiale: PP (polypropylen), creamcoloured (according to RAL 1013) Art.nr. D Pakke1 (mm) 087 2 813 12-25 10 Supplement 7 BIS Protective Pipe 10 BIS Shouldered Masonry Nail

BIS Gulv / Radiator Beslag O BIS Floor Bend guiding of plastic floor pipe 12 mm (O 10 15) protects the pipe against mechanical damage ('buckle') for pipe sleeve up to Ø 25 mm materiale: PP (polypropylen), creamcoloured (according to RAL 1013) Art.nr. D Model Pakke1 (mm) 087 2 000 12-25 Enkel 50 087 2 002 12-25 Dobbelt 25 Supplement 7 BIS Protective Pipe 10 BIS Shouldered Masonry Nail Alternativ 4 BIS Two-Part Floor Bend

O BIS Gulv / Radiator Beslag BIS Bend Guider guiding of plastic floor pipe 14-29 mm (O 10 20) to make 90 corners with plastic floorpipes pipe guidance corresponding prescribed bending radius 5xD smooth finish: pipe can be fixed without damage good grip due to special design material: glass-fibre reinforced PA (polyamide), black temperature resistance up to +140 C Art.nr. D B H Pakke1 (mm) (mm) (mm) 087 2 018 14-18 110 25 50 087 2 023 20-23 150 30 50 087 2 029 25-29 180 40 50

BIS Gulv / Radiator Beslag O BIS Protective Pipe pipe protection (O 10 25) Art.nr. 087 2 005: one-part protective sleeve (L = 1m) Art.nr. 087 2 007 and 087 2 016: two-part protective sleeve (L = 15 cm) protects pipe between floor bend and radiator against mechanical damage and UV-radiation easily cut to size fits perfectly to upper side of BIS floor bend materiale: PP (polypropylen), creamcoloured (according to RAL 1013) or white (according to RAL 9013) Art.nr. L Colour Pakke1 Enhed 087 2 005 1 m Cream 50 m. 087 2 007 150 mm Hvid 20 Stk 087 2 016 150 mm Cream 20 Stk

O BIS Gulv / Radiator Beslag BIS PE Flexible Pipe Sleeve (O 10 30) pipe protection Ø 12-47 mm protective sleeve for all types of pipe, in wall ducts or in concrete material: LDPE (low-density polyethylene), white temperature resistance from -30 C to +80 C Art.nr. D L Pakke1 Enhed (mm) 069 0 015 12-14 100 m 100 m. 069 0 017 15-16 100 m 100 m. 069 0 023 19-22 100 m 100 m. 069 0 029 23-28 50 m 50 m. 069 0 037 29-36 50 m 50 m.

BIS Gulv / Radiator Beslag O BIS Dobbeltrørbærer for floor pipe Ø 16-40 mm (O 15 05) sammenhængende u-beslag rørbærer for montering af varmerør i gulvet, før det bliver støbt i beton øget styrke ved hjælp af profilens form materiale: stål elforzinket Art.nr. D Model B s k Pakke1 (mm) (mm) (mm) (mm) 391 3 016 16 Enkel 43 1,0-250 391 3 020 20 Enkel 47 1,0-250 391 3 025 25 Enkel 52 1,0-250 391 3 028 28 Enkel 55 1,0-250 391 3 216 16 Dobbelt 61 1,0 41 250 391 3 220 20 Dobbelt 69 1,0 45 250 391 3 225 25 Dobbelt 79 1,0 50 250 391 3 228 28 Dobbelt 85 1,0 53 250 1 mm 20 mm D 25 mm B Ø 5,5 mm 5 mm 391 3 0XX 1 mm D 5 mm B k 20 mm Ø 5,5 mm 391 3 2XX Supplement 10 BIS Shouldered Masonry Nail

O BIS Gulv / Radiator Beslag BIS Shouldered Masonry Nail (O 15 10) for floor clamps Art.nr. 633 0 018: can be hammered into concrete without pre-drilling a hole Part No. 690 0 000: with hand protection and ergonomic hand grip Art.nr. 633 0 018: materiale: stål 1.1740, tempered Art.nr. Model Pakke1 Pakke2 633 0 018 BIS Shouldered Masonry Nail 100 3.000 690 0 000 BIS Hammer-in tool 1 -

BIS Gulv / Radiator Beslag O BIS Plug Clamp for floor pipe 28 mm (O 15 15) rørbærer for montering af varmerør i gulvet, før det bliver støbt i beton materiale: PA (polyamid), grøn Art.nr. D Model B H Pakke1 Pakke2 (mm) (mm) (mm) 085 2 050 28 Enkel 45 75 100 1.000 085 2 080 28 Enkel 45 115 50 1.000 085 2 013 28 Enkel 42 135 50-085 2 250 28 Dobbelt 80 75 50 500 085 2 280 28 Dobbelt 80 115 50 500 Alternativ 9 BIS Dobbeltrørbærer

O BIS Gulv / Radiator Beslag BIS Plug Clamp for floor pipe 14-25 mm 391 (O 15 17) B rørbærer for montering af varmerør i gulvet, før det bliver støbt i beton materiale: PA (polyamid) D Art.nr. D Model B H k Pakke1 (mm) (mm) (mm) (mm) 391 1 020 14-20 Enkel 34 48-100 391 1 025 20-25 Enkel 47 60-100 391 1 220 14-20 Dobbelt 51 48 32 50 391 1 225 20-25 Dobbelt 77 60 46 50 H h 391 1 02X B k D H h 391 1 22X Ø 6 mm

BIS Gulv / Radiator Beslag O BIS Tacker System for floor pipe Ø 14-20 mm (O 15 20) the BIS Tacker system consists of wide materiale: PP (polypropylen), sort and stable clamps and a problem free tacker device Art.nr. 693 0 001: Tacker device for a quick processing of tacker clamps (KA8 and KAL) Art.nr. 087 0 141 (type KA8): for insulating plates from 25 mm thickness with foil Art.nr. 087 0 158 (type KAL): for insulating plates from 40 mm thickness without foil (e.g. Styrodur, Styropor ) for floor pipe up to Ø 20 mm Art.nr. 693 0 001: Tacker device for a quick processing of tacker clamps (KA8 and KAL) Art.nr. 087 0 141 (type KA8): for insulating plates from 25 mm thickness with foil by means of self-adhesive tape attached together per 20 pieces Art.nr. D Model Type H Pakke1 Pakke2 (mm) 693 0 001 0,0 Tacker KA - 1-087 0 141 14-20 BIS Tacker Clamps (short) KA8 41 200 4.000 087 0 158 14-20 BIS Tacker Clamps (long) KAL 58 300 - (mm)

O BIS Gulv / Radiator Beslag BIS Tacker Clamp for floor pipe to burling plate or rail Ø 20 mm (O 15 25) for a manual fixing of floor pipe to profiled plate or rails e.g. Raufix on isolation plate for floor pipe up to Ø 20 mm can be used in addition to burled plates near manifolds, pipe bends and damaged plates shape retaining clamp ends length adapted to various insulation thicknesses almost all common rails have punched holes adapted to these clamps materiale: PP (polypropylen) Art.nr. D H Colour Pakke1 Pakke2 (mm) (mm) 087 0 240 20 40 Black 500 5.000 087 0 250 20 50 Red 500 5.000 087 0 260 20 60 Grøn 500 5.000 Alternativ 13 BIS Tacker System

BIS Gulv / Radiator Beslag O BIS Cast-in Pipe Clamp floor pipe to steel reinforcement Ø 16-20 mm (O 15 30) for clamping to steel reinforcement weld material: PE (polyethylene) mesh suitable for each postion (can be fitted on the cross or crosswise on the steel reinforcement weld mesh) Art.nr. D DN H h b x s Colour Pakke1 Pakke2 (mm) (mm) (mm) (mm) (mm) 087 1 016 16-18 10 36 18 27 x 3,0 Blue 1.000-087 1 020 20-38 15 24 x 5,0 Yellow 200 2.000

O BIS Gulv / Radiator Beslag BIS Rosette finishing of pipe apertures Ø 12-35 mm (O 20 05) one-part rosette for finishing of pipe apertures materiale: PP (polypropylen), hvid (i henhold til RAL 9016) Art.nr. D B H Pakke1 Pakke2 (mm) (mm) (mm) 067 1 412 12 50 12 100 900 067 1 415 15 55 12 100 800 067 1 418 18 55 12 100 800 067 1 422 22 55 12 100 800 067 1 428 28 55 12 100 800 067 1 435 35 65 12 100 400

BIS Gulv / Radiator Beslag O BIS Double Rosette finishing of pipe apertures Ø 12-20 mm (O 20 10) for finishing of pipe apertures both parts are securely connected Art.nr. 067 2 1XX: for copper or metal ingen skade ved befæstelse (egnet til alle pipes (Ø 12, 15, 18 or 20 mm) tykkelser) Art.nr. 067 2 2XX: for plastic or multilayer material: ABS, white (according to RAL pipe (Ø 14, 16, 17 or 20 mm) 9010) Art.nr. D B k Pakke1 Pakke2 (mm) (mm) (mm) 067 2 140 12-20 90 40 50 500 067 2 150 12-20 100 50 50 500 067 2 235 14-20 85 35 50 500 067 2 250 14-20 100 50 50 500

O BIS Gulv / Radiator Beslag BIS Gas Heater Support (O 25 05) fixing of gas heaters universal console for fixing of all current types of wallmounted gas heaters ideal for situations without a wall (eg. under slanted roof) 3 lateral dimensions: an overview per brand/type wall-mounted gas heater to determine the necessary console will be sent on request for the greater part pre-assembled with height-adjustable cross beams with 2 sliding tee-bolt assemblies for heaterfixing materiale: stål studs: pre-galvanized; cross-beams: zinc plated packed in plastic film (clean and complete at the construction site) incl. assembly instructions Art.nr. Model B Pakke1 (mm) 034 6 001 Gas Heater Support 490 1 034 6 008 Gas Heater Support 650 1 034 6 004 Gas Heater Support 900 1

BIS Gulv / Radiator Beslag O BIS Fixing Set for Isolated Radiator (OS1/ZVH) fixing of central heating radiators (O 30 05) fixing set (OS1 - ZVH) for radiators with sharp weld on top and side with plastic insert to prevent annoying noises support and slide provided with reinforcement groove materiale: metal dele lavet af stål; plastik dele lavet af POM (polyoxymethylen), creamcoloured; plug of PA (polyamide) elforzinket temperature resistance from -25 C to +120 C Part No. 075 1 001: 2 Bottom supports (Part No. 075 0 100) 2 Upper/Side supports (Part No. 075 2 400) 1 Fixing set (Part No. 065 8 200) Part No. 075 1 000: 2 Bottom supports (Part No. 075 0 000) 2 Upper/Side supports (Part No. 075 2 000) 1 Fixing set (Part No. 065 8 200) Art.nr. Model Type Pakke1 Pakke2 075 1 001 Fixing set for radiator OS1/ZVH 50-075 2 400 Upper/Side support 7524 50 200 075 0 100 Bottom support 7501 50 200 065 8 200 Fixing set 6582 50 - Parts also separately available.

O BIS Gulv / Radiator Beslag BIS Fixing Set for Radiator (OS1/ZVH) (O 30 10) fixing of central heating radiators fixing set (OS1 - ZVH) for radiators with sharp weld on top and side support provided with reinforcement groove material: metal parts made of steel; plug made of PA (polyamide) elforzinket Part No. 075 1 000: 2 Bottom supports (Part No. 075 0 000) 2 Upper/Side supports (Part No. 075 2 000) 1 Fixing set (Part No. 065 8 200) Art.nr. Model Type L LU S Pakke1 Pakke2 075 1 000 Fixing set for radiator OS1/ZVH - - - 50-075 2 000 Upper/Side support 7520 42 mm 46-62 3,0 50 200 075 2 100 Upper/Side support 7521 82 mm 85-102 3,5 50-075 0 000 Bottom support - 50 mm 47-69 4,0 50 200 075 0 400 Bottom support 7504 90 mm 72-102 4,0 50 - Parts also separately available. (mm) (mm) Alternativ 19 BIS Fixing Set for Isolated Radiator (OS1/ ZVH)

BIS Gulv / Radiator Beslag O BIS Panel Radiator Foot fixing of panel radiators (O 30 20) support for panel radiator with sharp weld on bottom side supports radiator during fixing (no heavy lifting) materiale: stål elforzinket Art.nr. Type Pakke1 075 6 000 7560 25

O BIS Gulv / Radiator Beslag BIS Ribbed Radiator Foot (O 35 05) fixing of ribbed radiators support for ribbed radiators supports radiator during fixing (no heavy lifting) fix radiator by means of nuts with tabs materiale: stål elforzinket Art.nr. Type Pakke1 075 5 000 7550 25

BIS Gulv / Radiator Beslag O BIS Side Holder fixing of ribbed radiators (O 35 10) wall holder for ribbed radiator with round materiale: stål water channels elforzinket clamped material thickness support: 3 mm distance between wall and waterchannel: 58 mm Art.nr. Type Pakke1 075 5 800 7558 50

O BIS Gulv / Radiator Beslag BIS Radiator Hanging Bracket (O 35 20) fixing of panel radiators wall holder for panel- or ribbed radiators with cover strip (up to 3.5 mm) the distance to the wall can be determined by sawing or cutting off the front side (27.5, 39 or 50 mm) materiale: stål elforzinket Art.nr. Type Pakke1 075 8 000 7580 50