Spill Containment. Contents

Similar documents
Spill Containment. Contents

Spill Containment. IBC Bunds

OIL SPILL CONTAINMENT CONTAINERS AND RACKING

SPILL CONTAINMENT PRODUCTS

We ll help you determine your containment needs

Spill Containment control it before it controls you!

Ultra HardTop P2. Ultra HardTop P4. Outdoor Secondary Containment Storage Systems Keep The Elements Out While Providing Convenient Access To Drums

Waste Oil Handling, Spill Containment & Lighting

Intelligent Spill Control. & Containment Solutions

SPILL CONTAINMENT SYSTEMS

Budget Basins Modular Spill Platform Spill Containment Pallets Spill Containment Platforms

Secondary Containment

IBC Tote Containment Sumps

Drum Dispensing Stations

Master Catalogue I August 2011

STORAGE DESIGN LIMITED TEL:

SPILL CONTROL SOLUTIONS. product list

Absorbtion materials Oil Only. This products only absorbs oil and NO water.

SPILL & CONTAINMENT. Spill Containment Spill Kits - Chemicals and Water Spill Kits - Hydrocarbons Only Absorbents

Cubetainer. The competition can t stack up to Snyder! Stackable Tanks, Stands and Containments

WPS. Your trade only partner in spill containment ISSUE 3

Good Housekeeping BMP

Steel Spill Containment Pallets

SPILL CONTAINMENT PALLETS

Spill Containment. Spill Containment. Premium Selection Of Environmental Compliance Products. Environmental and site safety solutions

UNITOR VACUUM cleaners

Containment & Spillage Control

New Product Announcement

Spill Platform Systems Drum Stacking Systems Outdoor Drum Storage Buildings Drum Work Stations Drum Over Packs & Salvage Drums Spill Kits &

Fact sheet 6: for farmers

Natural Resources Conservation Authority Guidelines for Secondary Containment of Hazardous Liquids stored Above-ground

SORBENTS SPILL KITS VEHICLE SPILL KIT. Contents: Part #: CSK40 - Oil Only Part #: CSKU40 - Universal. Contents:

Fact sheet 6: for farmers

PCB STORAGE. 1) 2-drum unit (4 x 2 x 4 ) 2) 4-drum unit (4 x 4 x 4 ) 3) 8-drum unit (8 x 4 x 4 ) 4) 16-drum unit (8 x 8 x 10 )

E. Fowler & Sons Ltd.

APPENDIX G Materials Storage and Handling Guidelines

CHEMICAL SPILL MANAGEMENT GUIDELINES

Spill Containment Products

Stormwater BMPs: Secondary Containment and Spill Control. September 2012

How To Safely Handle A Spill

HealthandSafetyOntario.ca. Hazards. Introduction. Legislation

MAGB HEALTH, SAFETY AND ENVIRONMENT GROUP POLLUTION INCIDENT RESPONSE PLAN

Heavy Duty Fibreglass Floor Grating

Basement Window Installation Guide Hopper and Sliding

G R O U P. ISO 9001:2008 Certified

Annual Storm Water Pollution Prevention Plan and Spill Prevention, Control and Countermeasures Plan Compliance Inspection

50AI01oe 02/15. Labko GRP cesspools. Instructions for installation, operation and maintenance

Autoclave Safety. Autoclaves are sterilizers using high pressure and high temperature steam. The potential safety risks for the operators are:

GUERNSEY OIL INSTALLATION GUIDELINES

Secure, clean. & economical. 3M Occupational Health & Environmental Safety Division. Sorbents

BEST MANAGEMENT PRACTICES FOR LEAK AND SPILL CONTROL

JOINT CBA AND SIA GUIDANCE FOR THE STORAGE OF FLAMMABLE LIQUIDS IN SEALED PACKAGES IN SPECIFIED EXTERNAL STORAGE AREAS

Bunding & Spill Containment

Policy document on the provision of waste & recycling collection and storage facilities. Includes both domestic and commercial premises

A SUPERIOR SOLUTION TO DRUM AND STEEL TANK USAGE

Unit FFL 1 Respond to requests for fire damage limitation work

Fabcograte FRP Grating. Tolerances: ±1/16. Tolerances: ±1/16. THICKNESS BAR SPACING PANEL SIZE (FT.) WT (LBS) 1" 1.5" x 1.

Guidance sheet 4: Chemical Spill Management

Fork Lift Truck Attachments

Civil Engineering Sector Labour-Management Health and Safety Committee

IMPORTANT SAFETY RULES TO FOLLOW

BRIDGE FIELD PAINTING, REPAINTING, 412 AND PAINT RESIDUE CONTAINMENT. A. Field Painting, Bridge Repainting and Residue Containment:

Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows

Suffolk County Department of Health Services. Division of Environmental Quality

ATTACHMENT 1-9 CHWSF CONTAINER MANAGEMENT

The Original and Patented Stackable Poly Tanks. When You Want to Beat the Drum!

Good Housekeeping Practices for DPW/Fleet Maintenance Facilities

Rutgers Environmental Health and Safety

Containment Systems. Spill Kits Spill Systems Secondary Containment Drum & Bulk Storage. Pages Pages Pages Pages 22-31

MAINE DEPARTMENT OF ENVIRONMENTAL PROTECTION

SPILL CONTAINMENT SOLUTIONS

Guide on the Segregation, Packaging, Labelling and Storage of Laboratory Chemical Wastes for Schools

ATTACHMENT 12 CONTAINERS

Green Seal Best Practices Guide for Fleet Vehicle Maintenance Operations

M E TA L C O N TA I N E R S 90

Spill Response Procedures & Sorbent Materials

TASTECH SERVICES LTD. Manufacturer and Supplier of Equipment and Daily Living Aides to Hospitals, Resthomes, OT s and the General Public

SPILL CONTROL & CONTAINMENT COLDFORM LAMINATED PADS - OIL ONLY SPILL CONTROL & CONTAINMENT SPILL CONTROL & CONTAINMENT

Spill containment & control

HYDROCARBON SPILLS PROCEDURE SIG-ENV-PR003

Saferand easierinstallation

PAINT REMOVAL SYSTEM PAINT REMOVAL SPECIFICATION SAFE WORK METHOD STATEMENT FOR LEAD PAINT REMOVAL

Ultrasonic support removal tank

UDOT SPILL PREVENTION and RESPONSE PLAN for CONSTRUCTION SITES

IMPORTANT INFORMATION

Slips, trips & falls Prevention Policy & Procedure 45

Wren Kitchens Installation Tips Carefully check your kitchen delivery Measuring out and marking up Fitting the base cabinets...

THE ENVIRONMENT AND PREDEPLOYMENT: UNIT PREDEPLOYMENT AND LOAD PLAN CONSIDERATIONS

ACO Construction & Building Products

Bathroom Installation Guide

UltraTech International, Inc. Canadian Secondary Containment Requirements

HealthandSafetyOntario.ca. Introduction. Storage Containers. Storing Flammable Liquids

SLIPS AND TRIPS Heading AT THE WORKPLACE FACT SHEET

USER INSTRUCTIONS FOR 10 LITRE PORTABLE DEHUMIDIFIER MODEL NO. DHMD102

Environmental Management System Procedures

Slips, trips and falls Policy

Part 2. Overview. Risk management. Workplace health and safety legislation. How should asbestos exposure be managed? Identifying asbestos hazards

Morgue refrigeration unit

Transcription:

Contents IBC Bund, Spill Pallet or Sump Pallets 3-9 IBC Spill Containment Bund - User Healthy & Safety Instructions Spill Trays, Drum Bunds & Drum Pallets 11-18 Tank Bunds 19-21 Standard Sized Bunds 22 Custom Built Bunds and Spill Trays 23-24 Chemical Cabinet for storage of chemicals 25 The information contained in this brochure is for general information purposes only. The information is provided by and whilst every effort has been made to ensure the information was correct at the time of publication, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the information, products, services, or related graphics contained within the brochure for any purpose. Any reliance you place on such information is therefore strictly at your own risk. 2

IBC Bund, Spill Pallet or Sump Pallet - SE1 480 FREE delivery. Quantity discounts available. Spill containment for 1 x 00 litre IBC. Without dispensing facility. Designed for the long term safe bunding of IBC s and suitable for all oils and 95% of chemicals, IBC Bund Spill Pallets help you comply with current oil and chemical storage regulations. Why buy IBC Bund Spill Pallets? Lighter than steel or polyethylene for easy manual handling. Simply shaped for easy cleaning. Order and bund your next IBC sooner with a UDL of 2000 kgs. Large catchment area around IBC to contain leaks. Year Guarantee. Designed for most sizes of IBC. Compliant with the 1% bund regulations. Year Guarantee SE1 Maximum UDL: Maximum size of IBC: Minimum size of IBC: Forklift Facility: Free delivery 1670 x 1570 x 650 mm 00 litres 10 litres 2000 kgs Circa 45 kgs 1270 length x 10 width mm 11 length x 950 width mm Extended sizes available. RAL 5015 Blue Available at an additional cost of 150.00 and extended delivery time. in England, Scotland and Wales. Orders placed before midday will usually be despatched the following day. Usual delivery 2-3 days. 1570 650 1670 3

IBC Bund, Spill Pallet or Sump Pallet - SE2 Spill containment for 1 x 00 litre IBC. With dispensing facility. Designed for the long term safe bunding of IBC s and suitable for all oils and 95% of chemicals, IBC Bund Spill Pallets help you comply with current oil and chemical storage regulations. With unique drip tray feature Specially designed for easy cleaning, the drip tray feature is unique to our Bund Spill Pallet. The tray catches leaks and small spills during dispensing operations in an easy to reach area, meaning you don t have to clean the entire bund floor. 485 FREE delivery. Quantity discounts available. Free delivery Why buy IBC Bund Spill Pallets? Lighter than steel or polyethylene for easy manual handling. Simply shaped for easy cleaning. Order and bund your next IBC sooner with a UDL of 2000 kgs. Low sides to ease the manual handling of dispensed liquids. Large catchment area around IBC to contain leaks. Year Guarantee. Designed for most sizes of IBC. Compliant with the 1% bund regulations. Year Guarantee SE2 Maximum UDL: Maximum size of IBC: Minimum size of IBC: Forklift Facility: 1570 1930 x 1570 x 650 mm 00 litres 10 litres 2000 kgs Circa 45 kgs 1270 length x 10 width mm 11 length x 950 width mm Extended sizes available. RAL 5015 Blue Available at an additional cost of 150.00 and extended delivery time. 650 in England, Scotland and Wales. Orders placed before midday will usually be despatched the following day. Usual delivery 2-3 days. 1930 4

IBC Bund, Spill Pallet or Sump Pallet - SE4 Spill containment for up to 4 x 00 litre IBC s. Without dispensing facility. Designed for the long term safe bunding of IBC s and suitable for all oils and 95% of chemicals, IBC Bund Spill Pallets help you comply with current oil and chemical storage regulations. 635 FREE delivery. Quantity discounts available. Free delivery Why buy IBC Bund Spill Pallets? Lighter than steel or polyethylene for easy manual handling. Simply shaped for easy cleaning. Order and bund your next IBC sooner with a UDL of 5000 kgs. Large catchment area around IBC to contain leaks. Year Guarantee. Designed for most sizes of IBC. Compliant with the 1% bund regulations. Year Guarantee SE4 Maximum UDL: Maximum size of IBC: Minimum size of IBC: 28 x 1670 x 370 mm 00 litres 10 litres 5000 kgs Circa 60 kgs 1270 length x 10 width mm 11 length x 950 width mm Extended sizes available. RAL 5015 Blue All prices exclude VAT. FREE delivery prices are to anywhere in England, Scotland and Wales. Orders placed before midday will usually be despatched the following day. Usual delivery 2-3 days. 28 370 1670 5

IBC Bund, Spill Pallet or Sump Pallet - SE5 Spill containment for up to 4 x 00 litre IBC s. With dispensing facility. Designed for the long term safe bunding of IBC s and suitable for all oils and 95% of chemicals, IBC Bund Spill Pallets help you comply with current oil and chemical storage regulations. 665 FREE delivery. Quantity discounts available. Free delivery Why buy IBC Bund Spill Pallets? Lighter than steel or polyethylene for easy manual handling. Simply shaped for easy cleaning. Order and bund your next IBC sooner with a UDL of 5000 kgs. Low sides to ease the manual handling of dispensed liquids. Large catchment area around IBC to contain leaks. Year Guarantee. Designed for most sizes of IBC. Compliant with the 1% bund regulations. SE5 Maximum UDL: Maximum size of IBC: Minimum size of IBC: 28 x 1930 x 470 mm 00 litres 10 litres 5000 kgs Circa 65 kgs 1270 length x 10 width mm 11 length x 950 width mm Extended sizes available. RAL 5015 Blue Year Guarantee in England, Scotland and Wales. Orders placed before midday will usually be despatched the following day. Usual delivery 2-3 days. 28 470 1930 6

6 x IBC Bund, Spill Pallet or Sump Pallet - SE6 Spill containment for up to 6 x 00 litre IBC s. Designed for the long term safe bunding of IBC s and suitable for all oils and 95% of chemicals. IBC Bund Spill Pallets catch leaks, drips and spills to help you comply with current oil and chemical storage regulations, and keep your storage areas clean. 1,640 Quantity discounts available. Why buy IBC Bund Spill Pallets? Cost effective IBC storage: store up to six IBC tanks on one unit, avoiding the cost of buying multiple units. Tough reinforced composite construction - withstands the rigours of a working environment. Broad range chemical compatibility - no need to purchase a new unit if your storage use changes. Retains long term structural integrity - will not warp over time. Lighter than steel or polyethylene - easily repositioned without risk of manual handling injury. Simply shaped - easily emptied or cleaned. UDL of 6600 kgs. Large catchment area - our IBC bunds have twice the catchment area of some other products on the market. Year Guarantee. SE6 Maximum UDL: 2500mm x 1750mm x 500 high 1500 litres 1755 litres 6600 kgs circa 250 kgs RAL 5015 Blue 6 IBC BUND - ALL SIZES IN MM Designed for most sizes of IBC. FRONT ELEVATION SIDE ELEVATION 2500 1750 2400 1650 Compliant with the 1% bund regulations. 50 SUPPORTS PLAN Anti-Slip Gritted Grating 200 300 Year Guarantee in England, Scotland and Wales. Usual delivery 2 weeks. 7

9 x IBC Bund, Spill Pallet or Sump Pallet - SE7 2,495 Quantity discounts available. Spill containment for up to 9 x 00 litre IBC s. Designed for the long term safe bunding of IBC s and suitable for all oils and 95% of chemicals. IBC Bund Spill Pallets catch leaks, drips and spills to help you comply with current oil and chemical storage regulations, and keep your storage areas clean. Why buy IBC Bund Spill Pallets? Cost effective IBC storage: store up to nine IBC tanks on one unit, avoiding the cost of buying multiple units. Tough reinforced composite construction - withstands the rigours of a working environment. Broad range chemical compatibility - no need to purchase a new unit if your storage use changes. Retains long term structural integrity - will not warp over time. Lighter than steel or polyethylene - easily repositioned without risk of manual handling injury. Simply shaped - easily emptied or cleaned. UDL of 9900 kgs. Large catchment area - our IBC bunds have twice the catchment area of some other products on the market. Year Guarantee. Designed for most sizes of IBC. Compliant with the 1% bund regulations. SE7 Maximum UDL: 50 SUPPORTS 3400 3500mm x 1750mm x 500 high 2250 litres 2475 litres 9900 kgs circa 390 kgs RAL 5015 Blue 9 IBC BUND - ALL SIZES IN MM FRONT ELEVATION SIDE ELEVATION 3500 1750 PLAN Anti-Slip Gritted Grating 1650 200 300 Year Guarantee in England, Scotland and Wales. Usual delivery 2 weeks. 8

12 x IBC Bund, Spill Pallet or Sump Pallet - SE8 Spill containment for up to 12 x 00 litre IBC s. Designed for the long term safe bunding of IBC s and suitable for all oils and 95% of chemicals. IBC Bund Spill Pallets catch leaks, drips and spills to help you comply with current oil and chemical storage regulations, and keep your storage areas clean. 3,340 Quantity discounts available. Why buy IBC Bund Spill Pallets? Cost effective IBC storage: store up to twelve IBC tanks on one unit, avoiding the cost of buying multiple units. Tough reinforced composite construction - withstands the rigours of a working environment. Broad range chemical compatibility - no need to purchase a new unit if your storage use changes. Retains long term structural integrity - will not warp over time. Lighter than steel or polyethylene - easily repositioned without risk of manual handling injury. Simply shaped - easily emptied or cleaned. UDL of 13,200 kgs. Large catchment area - our IBC bunds have twice the catchment area of some other products on the market. Year Guarantee. Designed for most sizes of IBC. SE8 4500mm x 1750mm x 500 high 3000 litres 3160 litres Maximum UDL: 13,200 kgs circa 520 kgs RAL 5015 Blue 12 IBC BUND - ALL SIZES IN MM FRONT ELEVATION SIDE ELEVATION 4500 1750 4400 1650 50 200 300 Compliant with the 1% bund regulations. SUPPORTS PLAN Anti-Slip Gritted Grating Year Guarantee in England, Scotland and Wales. Usual delivery 2 weeks. 9

IBC Bund Spill Pallet - User Health & Safety Instructions for SE1, SE2, SE4, SE5 The IBC Bund will give many years of service by just following the simple guidelines below. Siting the IBC Bund The IBC Bund should be sited on a flat level surface swept clean of stones and any other objects. A bed of soft sand can be used if the site is uneven. IBC Bunds with their own integral forklift facility ought to be sited on a flat and level surface. Loading the IBC Spill Containment Bundstand Forklift users should be instructed to lower the IBC unit as carefully and as level as possible on the Bund. The IBC unit must sit on the recessed pads, avoid lowering onto elevated surfaces. The forks should be withdrawn free of snagging the IBC Bund rim or any part of the IBC unit. Forklift users should be made aware that the single IBC Bund is not square and the IBC unit should be loaded correctly. The IBC unit nozzle should face toward the narrowest side. IBC Bunds with a drain off bucket facility cannot be loaded from the bucket side. The IBC unit should not be loaded onto the Bund while the IBC Bund is on a pallet. Spillages In the event of a spill and in harmony with good housekeeping, cleanups should occur immediately and any residual liquid neutralised. However, data sheets should be consulted and the health and safety officer or responsible person should supervise all cleanups. Waste should be disposed of in accord with the manufacturers direction. The units are designed/supplied for secondary containment of spillage, and not for primary containment unless otherwise agreed in writing. Use The IBC Bund is designed to cope with a variety of environments and is suitable for 95% of all liquids to be stored. When drawing from the IBC unit directly into a container, sensible practices should be followed such as not overfilling the container, not leaving the container whilst being filled, the wearing of appropriate gloves, etc. The filled container should not be removed from the IBC Bund without first making sure the IBC valve is turned off and not leaking fluid. Storage Thoroughly clean and store on a flat surface. Moving the IBC Spill Containment Bund The IBC Bund can be lifted quite comfortably by two healthy personnel. It is recommended that when moving the location of the IBC Bund it is manhandled onto a pallet and moved by forklift. If relocating please refer to Siting the IBC Bund (top left). When manhandling the IBC Bund sensible lifting practices should be employed: Do not:- a) Drag the IBC Bund b) Forklift without a pallet Under no circumstances should any IBC Bund be moved while accommodating an IBC unit. SG5 Spill containment for 2 x 00 litre IBC. With dispensing facility.

1 Drum Spill Tray - SE201 25% Spill Capacity for 1 x 205 litre Drum. Suitable for all oils and 95% of chemicals, the 1 Drum Spill Tray helps you comply with current oil and chemical storage regulations. With unique anti-slip gritted grating The specially designed fibreglass construction is simply shaped with a removable support surface, so your bund can be easily emptied or cleaned. Also, the heavy-duty anti-slip gritted grating allows you to position your drums without sliding. 175 FREE delivery. Quantity discounts available. Free delivery Why buy Drum Bunds? Lighter than steel or polyethylene for easy manual handling. Simply shaped with removable support surface for easy cleaning. Heavy-duty anti-slip support surface. Year Guarantee. Year Guarantee SE201 Support Material: Maximum Loading: Anti-slip Fibreglass Grating 850 x 850 x 160 mm 55 litres 55 litres 500 kgs Circa 20 kgs RAL 5015 Blue + RAL 6029 Green 850 in England, Scotland and Wales. Orders placed before midday will usually be despatched the following day. Usual delivery 2-3 days. 850 160 Anti-slip gritted grating 11

1 Drum Spill Pallet with forklift facility - SE201-FL 25% Spill Capacity for 1 x 205 litre Drum. Suitable for all oils and 95% of chemicals, the 1 Drum Spill Pallet helps you comply with current oil and chemical storage regulations. With unique forklift friendly & anti-slip features Specially designed to aid the transportation of your drums, the fibreglass construction is much stronger than polyethylene, both bund and drums can be moved together safely. When using a forklift drum grabber attachment, drums can be positioned without sliding, thanks to the specially gritted grating surface. 240 FREE delivery. Quantity discounts available. Free delivery Why buy Drum Pallets? Can be moved while fully loaded. Simply shaped with removable support surface for easy cleaning. Heavy-duty anti-slip support surface. Year Guarantee. Year Guarantee SE201-FL Support Material: Maximum Loading: Anti-slip Fibreglass Grating 850 x 850 x 290 mm 55 litres 55 litres 500 kgs Circa 25 kgs RAL 5015 Blue + RAL 6029 Green 850 in England, Scotland and Wales. Orders placed before midday will usually be despatched the following day. Usual delivery 2-3 days. 850 290 Anti-slip gritted grating 460 12

2 Drum Bund - SE202 Spill containment for 2 x 205 litre Drums. Designed for the long term safe bunding of drums and suitable for all oils and 95% of chemicals, the 2 Drum Bund helps you comply with current oil and chemical storage regulations. With unique anti-slip gritted grating The specially designed fibreglass construction is simply shaped with a removable support surface, so your bund can be easily emptied or cleaned. Also, the heavy-duty anti-slip gritted grating allows you to position your drums without sliding. 225 FREE delivery. Quantity discounts available. Free delivery Why buy Drum Bunds? Lighter than steel or polyethylene for easy manual handling. Simply shaped with removable support surface for easy cleaning. Heavy-duty anti-slip support surface. Year Guarantee. Year Guarantee SE202 Support Material: Maximum Loading: Anti-slip Fibreglass Grating 1380 x 850 x 400 mm 205 litres 270 litres 00 kgs Circa 30 kgs RAL 5015 Blue + RAL 6029 Green 1380 in England, Scotland and Wales. Orders placed before midday will usually be despatched the following day. Usual delivery 2-3 days. 850 400 Anti-slip gritted grating 13

2 Drum Pallet with forklift facility - SE202-FL Spill containment for 2 x 205 litre Drums. Designed for the long term safe bunding of drums and suitable for all oils and 95% of chemicals, the 2 Drum Pallet helps you comply with current oil and chemical storage regulations. With unique forklift friendly & anti-slip features Specially designed to aid the transportation of your drums, the fibreglass construction is much stronger than polyethylene, both bund and drums can be moved together safely. When using a forklift drum grabber attachment, drums can be positioned without sliding, thanks to the specially gritted grating surface. 315 FREE delivery. Quantity discounts available. Free delivery Why buy Drum Pallets? Can be moved while fully loaded. Simply shaped with removable support surface for easy cleaning. Heavy-duty anti-slip support surface. Year Guarantee. Year Guarantee SE202-FL Support Material: Maximum Loading: Anti-slip Fibreglass Grating 1380 x 850 x 530 mm 205 litres 270 litres 00 kgs Circa 45 kgs RAL 5015 Blue + RAL 6029 Green 1380 in England, Scotland and Wales. Orders placed before midday will usually be despatched the following day. Usual delivery 2-3 days. 850 530 Anti-slip gritted grating 940 14

4-8 Drum Bund - SE203 Spill containment for 4 x 205 litre Drums. Designed for the long term safe bunding of drums and suitable for all oils and 95% of chemicals, the 4-8 Drum Bund helps you comply with current oil and chemical storage regulations. With unique anti-slip gritted grating The specially designed fibreglass construction is simply shaped with a removable support surface, so your bund can be easily emptied or cleaned. Also, the heavy-duty anti-slip gritted grating allows you to position your drums without sliding. 355 FREE delivery. Quantity discounts available. Free delivery Why buy Drum Bunds? Lighter than steel or polyethylene for easy manual handling. Simply shaped with removable support surface for easy cleaning. Heavy-duty anti-slip support surface. Year Guarantee. Year Guarantee SE203 Support Material: Maximum UDL: Anti-slip Fibreglass Grating 1380 x 1380 x 220 mm 205 litres 290 litres 2500 kgs Circa 45 kgs RAL 5015 Blue + RAL 6029 Green 1380 in England, Scotland and Wales. Orders placed before midday will usually be despatched the following day. Usual delivery 2-3 days. 1380 220 Anti-slip gritted grating 15

4-8 Drum Pallet with forklift facility - SE203-FL Spill containment for 4 x 205 litre Drums. Designed for the long term safe bunding of drums and suitable for all oils and 95% of chemicals, the 4-8 Drum Pallet helps you comply with current oil and chemical storage regulations. With unique forklift friendly & anti-slip features Specially designed to aid the transportation of your drums, the fibreglass construction is much stronger than polyethylene, both bund and drums can be moved together safely. When using a forklift drum grabber attachment, drums can be positioned without sliding, thanks to the specially gritted grating surface. 490 FREE delivery. Quantity discounts available. Free delivery Why buy Drum Pallets? Can be moved while fully loaded. Simply shaped with removable support surface for easy cleaning. Heavy-duty anti-slip support surface. Year Guarantee. Year Guarantee SE203-FL Support Material: Maximum UDL: Anti-slip Fibreglass Grating 1380 x 1380 x 350 mm 205 litres 290 litres 2500 kgs Circa 65 kgs RAL 5015 Blue + RAL 6029 Green 1380 in England, Scotland and Wales. Orders placed before midday will usually be despatched the following day. Usual delivery 2-3 days. 1380 350 Anti-slip gritted grating 940 16

7 Drum Bund - SE205 860 FREE delivery. Quantity discounts available. Spill containment for 7 x 205 litre Drums. Designed for the long term safe bunding of drums and suitable for all oils and 95% of chemicals, the 7 Drum Bund helps you comply with current oil and chemical storage regulations. Ideal for hand barrel trolleys Specially designed for safe storage of your drums. When using a hand barrel trolley, drums can easily be moved and positioned without sliding, thanks to the specially gritted grating surface. Why buy Drum Bunds? Lighter than steel or polyethylene for easy manual handling. Simply shaped with removable support surface for easy cleaning. Heavy-duty anti-slip support surface. Year Guarantee. Low profile for easy manual loading. Year Guarantee SE205 Support Material: Maximum UDL: 7 Drum Bund Free delivery Anti-slip Fibreglass Grating 4300 x 700 x 0 mm 205 litres 250 litres 2000 kgs Circa 90 kgs RAL 5015 Blue + RAL 7035 Grey 700mm 4300mm in England, Scotland and Wales. Usual delivery within 2 weeks from order. 0mm Anti-slip gritted grating 17

Bunded Drum Trolley - SE204 For dispensing and spill containment for 1 x 205 litre Drums. Designed for easier dispensing and safe bunding of drums. Suitable for all oils and 95% of chemicals, the Bunded Drum Trolley helps you comply with current oil and chemical storage regulations. Why buy a Bunded Drum Trolley? Tough reinforced composite / steel construction. Simply shaped for easy cleaning. Easy to load and tip. Anti-tip safety stops. Heavy-duty wheels. Accepts 25 litre kegs for dispensing. Year Guarantee. 370 FREE delivery. Quantity discounts available. Free delivery SE204 Year Guarantee 1620 x 670 x 590mm 205 litres 250 litres Circa 30 kgs RAL 5015 Blue in England, Scotland and Wales. Orders placed before midday will usually be despatched the following day. Usual delivery 2-3 days. 670 1620 590 18

Tank Bund - SE301 930 Excluding delivery. Quantity discounts available. Spill containment for up to 2000 litres. 2 supports. Designed for the long term bunding of vessels, tanks, containers etc. up to 2000 litres. Steel supports can be factory-fitted to suit your specific requirements. Suitable for all oils and 95% of chemicals, Tank Bunds help you comply with current oil and chemical storage regulations. Why buy a Tank Bund? Simply shaped for easy cleaning. 5000 kg maximum uniformly distributed load. Easy to relocate. Compliant with the 1% bund regulations. SE301 Maximum UDL: 2200 x 2200 x 600 mm 2000 litres 2250 litres 5000 kgs 140 kgs RAL 5015 Blue STEEL SUPPORTS All prices exclude VAT. Delivery extra. Usual delivery within 2 weeks of receipt of order. Fitted to specification 2200 1900 50 0 2200 600 40 1 450 19

Tank Bund - SE302 1,085 Excluding delivery. Quantity discounts available. Spill containment for up to 2000 litres. 3 supports. Designed for the long term bunding of vessels, tanks, containers etc. up to 2000 litres. Steel supports can be factory-fitted to suit your specific requirements. Suitable for all oils and 95% of chemicals, Tank Bunds help you comply with current oil and chemical storage regulations. Why buy a Tank Bund? Simply shaped for easy cleaning. 5000 kg maximum uniformly distributed load. Easy to relocate. Compliant with the 1% bund regulations. SE302 Maximum UDL: STEEL SUPPORTS 2200 x 2200 x 600mm 2000 litres 2250 litres 5000 kgs 170 kgs RAL 5015 Blue All prices exclude VAT. Delivery extra. Usual delivery within 2 weeks of receipt of order. Fitted to specification 2200 1900 50 0 2200 600 40 1 450 20

Tank Bund - SE303 1,695 Excluding delivery. Quantity discounts available. Spill containment for up to 2000 litres. With 4 supports & removable grated platform. Designed for the long term bunding of vessels, tanks, containers etc. up to 2000 litres. Suitable for all oils and 95% of chemicals, Tank Bunds help you comply with current oil and chemical storage regulations. With unique anti-slip gritted grating The specially designed fibreglass construction is simply shaped with a removable support surface, so your tank bund can be easily emptied or cleaned. The heavy-duty anti-slip gritted grating allows you to position tanks without sliding. Why buy a Tank Bund? Simply shaped for easy cleaning. 5000 kg maximum uniformly distributed load. Easy to relocate. Compliant with the 1% bund regulations. SE303 Support Material: Maximum UDL: STEEL SUPPORTS Anti-slip Fibreglass Grating 2200 x 2200 x 650 mm 2000 litres 2250 litres 5000 kgs 280 kgs RAL 5015 Blue 2200 All prices exclude VAT. Delivery extra. Usual delivery within 2 weeks of receipt of order. 1900 50 0 2200 Anti-slip gritted grating 650 1 450 50 40 21

Standard Bunds - SE401-409 The standard bund range has been developed to fulfil spill containment needs of customers who require bunding for permanently sited liquid storage tanks, vessels, and containers etc, specifically those up to 6000 litres in capacity. Quick and easy to install, available in a range of sizes and capacities, the one piece moulded GRP units are a much more viable long term solution to traditional block or brick on concrete built bunds. Standard Bunds help you comply with current oil and chemical storage regulations. Why buy a Standard Bund? Lightweight. Easy to install. Simply shaped for easy cleaning. Year Guarantee. Compliant with the 1% bund regulations. Year Guarantee All prices exclude VAT. Delivery extra. Usual delivery within 2 weeks of receipt of order. SE401-409 SE401 (1200 litres) 3200 x 2200 x 200mm SE402 (1800 litres) 3200 x 2200 x 300mm SE403 (2400 litres) 3200 x 2200 x 400mm SE404 (1900 litres) 4200 x 2600 x 200mm SE405 (2850 litres) 4200 x 2600 x 300mm SE406 (3800 litres) 4200 x 2600 x 400mm SE407 (3360 litres) 6200 x 3000 x 200mm SE408 (5040 litres) 6200 x 3000 x 300mm SE409 (6720 litres) 6200 x 3000 x 400mm RAL 5015 Blue 685 (delivery extra) 740 (delivery extra) 800 (delivery extra) 1,0 (delivery extra) 1,085 (delivery extra) 1,165 (delivery extra) 1,760 (delivery extra) 1,860 (delivery extra) 1,965 (delivery extra) 22

Custom Built Bunds and Spill Trays Tailor made to your exact requirements, our custom built bunds are more economical than you might think. Your bund will be manufactured in a resin finish to suit your specific liquid storage requirements providing you with a cost effective long term solution to your bunding needs. Previous Projects & Indicative Prices Why buy a Custom Built Bund or Spill Tray? Made to suit your exact needs. Lightweight. Easy to install. Compliant with the 1% bund regulations. in England, Scotland and Wales. Usual delivery within 2 weeks of receipt of order. 500 x 500 x 500mm. 0 5000 x 900 x 150mm. 560 Generator Drip Tray - made in four sections for ease of installation. 3000 x 2500 x 150mm. 1,575 Hydrochloric acid bunds. 3000 x 2000 x 400mm. 1,1 inc. grated floor. Ramp storage area 2,795 Additional features you can incorporate into the design: Anti-slip flooring into the manufacture process. Anti-slip fibreglass grating as an internal floor to allow oils or products to flow underneath creating a safer walking surface. GRP walkways, platforms or access steps. Hazard identification markings. 23

Custom Built Bunds and Spill Trays IBC Bund with removable side. Tailor made to your exact requirements, our custom built bunds are more economical than you might think. Your bund will be manufactured in a resin finish to suit your specific liquid storage requirements providing you with a cost effective long term solution to your bunding needs. Why buy a Custom Built Bund or Spill Tray? Made to suit your exact needs. Lightweight. Easy to install. Compliant with the 1% bund regulations. in England, Scotland and Wales. Usual delivery within 2 weeks of receipt of order. 24

Chemical Cabinet for storage of chemicals - SE501 3,495 (delivery extra) Safe storage of chemicals and particularly oil products has been the focus of Environment Agency attention for a number of years. This has resulted in the introduction of new legislation to protect the environment from contamination. In response we have developed a number of practical and cost effective spill containment solutions, one of which is the Chemical Cabinet. Cabinet Construction The principal material used is glass reinforced plastic (GRP). The walls, doors and roof are manufactured using high quality Isophthalic resin in a sandwich style construction. The spill containment area (bund) is manufactured using Vinyl Ester resin to ensure maximum corrosion resistance against the harshest of chemicals. The support floor is created with 38mm thick GRP grating. GRP offers many advantages over other materials not least of all its high strength to weight ratio. It does not corrode, it will never need painting and has UV resistant properties, all of which make it virtually maintenance free. GRP has an indefinite life expectancy which makes the Sui Generis Spill Containment Cabinet the most viable storage facility available. Siting the Cabinet GRP storage cabinets are designed to be positioned on a flat level surface, swept clean of stones and any other objects. Uneven floors may impede the smooth operation of the doors. A bed of dry sand/cement mix can be used if the site is uneven. SE501 Hinges: Stainless Steel Door Stays: Stainless Steel Lock: Stainless Steel Tower Bolts: Galvanised Louvres: Aluminium Support Floor: Anti-slip fibreglass Grating 00 litres 1250 litres Circa 400 kgs Max. Loading Capacity: 1200 kgs each side Light aircraft grey Special Colours: Any RAL colour available. Free of charge. Spillages In the event of a spill and in harmony with good housekeeping, clean up immediately and neutralise any residual liquid. The units are designed/supplied for secondary containment of spillage and not for primary containment, unless otherwise agreed in writing. Re-siting the Cabinet Use lifting eyes supplied. Remove all products before moving. 2050 2050 1250 Litre Bund 2900 1250 Litre Bund 2900 300 300 Cleaning Avoid using steam cleaners. Try mild detergents. If this does not achieve a desired result please contact. 2000 Louvre 2000 Louvre 1500 1500 25