Classifying Your Import Shipment



Similar documents
Side-by-Side Comparison of Free Trade Agreements and Selected Preferential Trade Legislation Programs--Non-Textiles

Side-by-Side Comparison of Free Trade Agreements and Selected Preferential Trade Legislation Programs--Non-Textiles

Bonded Processes Inbond Transportation/Bonded Warehouse/Foreign Trade Zone

Customs Tariff and classification

Textile & Apparel Rules Under Free Trade Agreements & Preference Programs

What Every Member of the Trade Community Should Know About: U.S. Rules of Origin Preferential and Non-Preferential Rules of Origin

A GUIDE FOR REDUCING CUSTOMS DUTIES EFFECTIVELY (and Legally)

Free Trade Agreements and State-Level Trade. By Joan Shipps Office of Trade Policy Analysis Industry Analysis

Filing your EEI into AES

What Every Member of the Trade Community Should Know About: Reasonable Care (A Checklist for Compliance)

What Every Member of the Trade Community Should Know About: Buying and Selling Commissions

CHAPTER 2 : TRADE IN GOODS. Except as otherwise provided, this Chapter applies to the trade in goods between the Parties.

IMPORTER'S GUIDE TO U.S. CUSTOMS CLEARANCE OF IMPORTED GOODS

Cane and Beet Sugar (Quota, Classification & Entry)

FOCUSED ASSESSMENT PRE-ASSESSMENT SURVEY QUESTIONNAIRE

U.S. Trading Companies, 2012

Building Expertise in International Supply Chain Management

Non Resident Importers (NRI)

What Every Member of the Trade Community Should Know About: Customs Value

U.S. Trade Overview, 2013

BIS CEMLA Roundtable on Fiscal Policy, public debt management and government bond markets: issues for central banks

DHL CUSTOMS SERVICES TAKING THE COMPLEXITY OUT OF CUSTOMS

How to build a great compliance program for your U.S. imports

Services Summary TRADITIONAL CUSTOMS SERVICES. Instruments of International Traffic Foreign market entry plans

Pest Control Products Act

CHAPTER 1 INITIAL PROVISIONS AND GENERAL DEFINITIONS. Section A: Initial Provisions

Market Access and Opportunities. Free Trade Agreements (Trade in Goods) Guide for SMEs

Table and Kitchen Glassware

Free Trade Agreements (FTAs) with Indonesia. Mike Lee FTA Unit, Trade Services & Policy Group 07 November 2013

Axioma Risk Monitor Global Developed Markets 29 June 2016

DHL GLOBAL FORWARDING Import Customs Brokerage USA

A Primer on U.S. Export Controls

UNCITRAL legislative standards on electronic communications and electronic signatures: an introduction

Title: Complying with US Customs Product Documentation and Marking Requirements (CFR, Title 19,U.S.C. 19, HTS US)

ECLAC Economic Commission for Latin America and the Caribbean

Agreement between Japan and the Socialist Republic of Viet Nam for an Economic Partnership

GENERAL NOTES TARIFF SCHEDULE OF THE UNITED STATES

Intercargo Insurance Company Master Application for Transportation Industry Liability Insurance Coverage(s)

98. STOCK EXCHANGE SERVICE

APPENDIX D MOTOR VEHICLE TRADE UNITED STATES. Appendix Party means either Japan or the United States, as the case may be;

RULES OF ORIGIN FOR THE CHINA-PAKISTAN FREE TRADE AREA

FINANCING EXPORTS. Sandro Murtas Small Business Administration Office of International Trade Regional Manager Tel:

Frequently Asked Questions

United Nations Convention on the Assignment of Receivables in International Trade

DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection. CBP FORM 7501 INSTRUCTIONS (Updated July 24, 2012)

[LOGO] ROGERS COMMUNICATIONS INC. DIVIDEND REINVESTMENT PLAN. November 1, 2010

ONESOURCE Global Trade for FTA. Systematic approach to prepare for the coming China-Korea FTA

Regulations and Procedures for the International Registry

Questions and Answers on CBP Bonds

REGULATION (EEC) No 2309/93

97. STOCK BROKING SERVICES

1. Not Subject to the EAR and Defense Article. (1) Reserved. (2) Reserved

Advantages of Free Trade Agreements (FTAs) between Singapore and China. Mike Lee Free Trade Agreement Unit

Agreement. (as in force from July 1, 2014)*

Medical Device Regulatory Requirements for Mexico

Market Briefing: S&P 500 Revenues & the Economy

CHAPTER 1 INITIAL PROVISIONS AND GENERAL DEFINITIONS. Section A: Initial Provisions

AIFMD means Directive 2011/61/EU of the European Parliament and of the Council of 8 June 2011 on Alternative Investment Fund Managers, as amended.

APPENDIX 3 TO ANNEX I. Movement certificate EUR. 1 and application for a movement certificate EUR. 1. Printing instructions

publish in advance any regulation governing customs matters that it proposes to adopt; and

Other As levied or applicable Penalty/interest ( Rate of tax is effective from )

What Every Member of the Trade Community Should Know About: Coffee

Recent developments regarding Mexico s tax treaty network and relevant court precedents

U.S. Census Bureau U.S. Bureau of Economic Analysis NEWS U.S. Department of Commerce Washington, DC 20230

TENNESSEE DEPARTMENT OF REVENUE LETTER RULING # WARNING

Mastering Global Trade Compliance for Growth Through Export. Track 1 Session 3

INFORMATION FOR OBSERVERS. Project: Compliance Costs for REACH (Agenda Paper 3)

Navigating the Buy American Act, Trade Agreements Act, and other Domestic Preference Regimes

Canon USA, Inc. WEBVIEW LIVESCOPE SOFTWARE DEVELOPMENT KIT DEVELOPER LICENSE AGREEMENT

U.S. Customs and Border Protection

INTERNATIONAL BUSINESS DEVELOPMENT -- STRATEGIC PLANNING ISSUES

SOURHERN AFRICAN DEVELOPMENT COMMUNITY

BTMU Focus Latin America Mexico: Export performance in 2014

Agreement setting up a free trade area between the Arab Mediterranean countries

TURKISH PERSPECTIVE ON FTAs under the Turkey-EU CU (with a Special Emphasis to TTIP) Murat YAPICI DG for EU Affairs Ministry of Economy

Foreign Trade and Payments Ordinance

GUIDELINES FOR FOOD IMPORT CONTROL SYSTEMS

67. MANAGEMENT, MAINTENANCE OR REPAIR SERVICES FOR GOODS, EQUIPMENTS OR PROPERTIES

114. TRAVEL BY CRUISE SHIP SERVICE

THOMSON REUTERS (TAX & ACCOUNTING) INC. FOREIGN NATIONAL INFORMATION SYSTEM TERMS OF USE

PEST CONTROL PRODUCTS ACT

CHAPTER 3 RULES OF ORIGIN AND IMPLEMENTATION PROCEDURES. Section A: Rules of Origin

List of tables. I. World Trade Developments

Transcription:

Classifying Your Import Shipment

Presenter Korrie Thomas Director, Compliance Houston Joined BDP in 2011 27 years of trade experience Licensed Customs broker since 1994

Agenda The Basics What, Why, Who General Rules of Interpretation Structure of the HTS CFR 19 Chapter 10

What is Classification? Determination of the appropriate HTS numerical code to: identify the proper rate of duty all statistical data Applies for every product even Responsibility of the Importer under the Mod Act (1994)

Why Classify? Classification linked to Partner Government Agency (PGA) requirements. Determines revenue to U.S. Government in the form of Customs Duty. Provides information for statistical reporting to Department of Commerce, Bureau of Census.

Who Classifies Goods Importers Customs (via Ruling Requests) Custom Brokers (in tandem with importers) Attorneys Consultants The legal liability lies with the importer but also with any expert they may have employed or relied upon for guidance. Accuracy of any classification is only as good as the information received about the commodity.

Things to Consider HTS Classification Country of Origin Normal Trade Relations (NTR) Special Programs (C/O related) GSP/AGOA Caribbean Basin Initiative Free Trade Agreements Special Programs (Non C/O related) Pharmaceuticals Civil aviation Anti-Dumping Binding Rulings

Reasonable Care Established under the Mod Act transferred legal responsibility from Customs to the importer of record for: proper classification valuation Applies to all parties in the transaction Provide proper documentation to back up

Getting Started: Questions to Ask What is the product called? Synonyms Generic name What does it do? How does it work? How is it used? In what industry is it used? Commercial Industrial Home Simple or complex?

Information Required Detailed description Illustrative materials Samples Sketches Diagrams Brochures Breakdown by percentage Principle use of goods Commercial, scientific, or common designations. Any other pertinent information

Tools for Classifying Goods Support is available from: HTS Customs Personnel Customs Bulletins Ruling Module/CROSS Website Explanatory Notes Internet Subscription Services

Common Classification Problems Shipments arrive without purchase orders Classification on documents missing or inaccurate Delays occur while classification being researched Inadvertent non-reporting to PGA s

General Rules of Interpretation Govern classification in the tariff schedule Hierarchy based Most fall under the first three rules US does not use rule 4 Rule 5 deals with packaging Rule 6 use headings

GRI 1 The table of contents, alphabetical index, and titles of sections, chapters and sub-chapters are provided for ease of reference only; for legal purposes, classification shall be determined according to the terms of the headings and any relative section or chapter notes and, provided such headings or notes do not otherwise require, according to the following provisions:

GRI 2 (a) Any reference in a heading to an article shall be taken to include a reference to that article incomplete or unfinished, provided that, as entered, the incomplete or unfinished article has the essential character of the complete or finished article. It shall also include a reference to that article complete or finished (or falling to be classified as complete or finished by virtue of this rule), entered unassembled or disassembled. (b) Any reference in a heading to a material or substance shall be taken to include a reference to mixtures or combinations of that material or substance with other materials or substances. Any reference to goods of a given material or substance shall be taken to include a reference to goods consisting wholly or partly of such material or substance. The classification of goods consisting of more than one material or substance shall be according to the principles of rule 3.

GRI 3 When, by application of rule 2(b) or for any other reason, goods are, prima facie, classifiable under two or more headings, classification shall be effected as follows: (a) The heading which provides the most specific description shall be preferred to headings providing a more general description. However, when two or more headings each refer to part only of the materials or substances contained in mixed or composite goods or to part only of the items in a set put up for retail sale, those headings are to be regarded as equally specific in relation to those goods, even if one of them gives a more complete or precise description of the goods. (b) Mixtures, composite goods consisting of different materials or made up of different components, and goods put up in sets for retail sale, which cannot be classified by reference to 3(a), shall be classified as if they consisted of the material or component which gives them their essential character, insofar as this criterion is applicable. (c) When goods cannot be classified by reference to 3(a) or 3(b), they shall be classified under the heading which occurs last in numerical order among those which equally merit consideration.

GRI 4 (not used in the US) Goods which cannot be classified in accordance with the above rules shall be classified under the heading appropriate to the goods to which they are most akin.

GRI 5 In addition to the foregoing provisions, the following rules shall apply in respect of the goods referred to therein: (a) Camera cases, musical instrument cases, gun cases, drawing instrument cases, necklace cases and similar containers, specially shaped or fitted to contain a specific article or set of articles, suitable for long-term use and entered with the articles for which they are intended, shall be classified with such articles when of a kind normally sold therewith. This rule does not, however, apply to containers which give the whole its essential character; (b) Subject to the provisions of rule 5(a) above, packing materials and packing containers entered with the goods therein shall be classified with the goods if they are of a kind normally used for packing such goods. However, this provision is not binding when such packing materials or packing containers are clearly suitable for repetitive use.

GRI 6 For legal purposes, the classification of goods in the subheadings of a heading shall be determined according to the terms of those subheadings and any related subheading notes and, mutatis mutandis, to the above rules, on the understanding that only subheadings at the same level are comparable. For the purposes of this rule, the relative section, chapter and subchapter notes also apply, unless the context otherwise requires.

Additional Rules of Interpretation One rule which provides guidance on use provisions for purposes of classification. 1. In the absence of special language or context which otherwise requires-- (a) a tariff classification controlled by use (other than actual use) is to be determined in accordance with the use in the United States at, or immediately prior to, the date of importation, of goods of that class or kind to which the imported goods belong, and the controlling use is the principal use; (b) a tariff classification controlled by the actual use to which the imported goods are put in the United States is satisfied only if such use is intended at the time of importation, the goods are so used and proof thereof is furnished within 3 years after the date the goods are entered; (c) a provision for parts of an article covers products solely or principally used as a part of such articles but a provision for "parts" or "parts and accessories" shall not prevail over a specific provision for such part or accessory; and (d) the principles of section XI regarding mixtures of two or more textile materials shall apply to the classification of goods in any provision in which a textile material is named. Additional U.S. Rule of Interpretation are found only in the U.S. version of the HTS

Treatment of Parts and Accessories Classified in own heading (Eo Nomine) Classified with the article if heading so provides Classified in specific heading for parts and accessories

Eo Nomine Parts 8407 Spark-ignition Engines 8408 Diesel Engines 8413, 8414 Pumps 8481 Valves 8482 Bearings 8483 Transmissions 8484 Gaskets 8501 Motors, generators 8508 Electro-mechanical hand tools 8511 Electrical ignitions/starting equip 8535 Switches 8536 Motor Starters (not an exhaustive list)

Roadmap to Successful Classifying Use the General Rules of Interpretation, in order Consult Legal Notes, Section and Chapter notes Stick to headings, the same sub-description may appear under more than one heading Have substantive back-up for all classifications used or for any changes made by either you or by customs; Review at least annually; develop communication protocols with your customs broker.

Legal Notes Define the scope Direct user to the appropriate location in the tariff Provide exclusion details Provides specific inclusions Provides definitions and terms used Legal Notes should be consulted first, before continuing

The Harmonized Tariff International 21 Sections, by industry 97 Chapters by general description 5000+ headings, sub-headings United States 22 Sections, by industry 99 Chapters by general description Chapter 98 and 99 Special classes, temporary provisions

The Structure of the US HTS Chapters 1-97: Commodity Provisions Chapter 98: Special Classification Provisions Chapter 99 Temporary Legislation Temporary Modifications Additional Import Restrictions

Contents of the US HTS Title Pages Table of Contents General Rules of Interpretation (GRI) General Notes (GN) General Statistical Notes (GSN) Statistical requirements Statistical annotations Statistical reporting number Abbreviations Reporting of exports Chemical Appendix Pharmaceutical Appendix Intermediate Chemicals for Dyes Appendix Statistical Annex A (Schedule C, Country and Territory Designations for U.S. Foreign Statistics) Statistical Annex B (International Standard Country Codes-ISO) Statistical Annex C (Schedule D, U.S. Customs Districts and Port Codes for U.S. Foreign Statistics) Alphabetical Index Change Record

Finding a Tariff Number Section Title Page (Section Notes) XI Chapter Title Page (Chapter Notes) 61 Heading Descriptions 6106 Subheading Descriptions (International Level) 6106.20 U.S. Subheading National Level (Tariff Assessment) 6106.20.10 U.S. Statistical Subdivision 6106.20.1010

Example Flashlights are classified under HTSUS 8513.10.2000 Portable electric lamps designed to function by their own source of energy Chapter 85 Heading 8513 Subheading 8513.10 Rate Subheading 8513.10.20 Statistical Subheading 8513.10.2000

Section, Chapter & Subheading Notes Also called legal notes Have same legal weight as headings and subheadings Have international status Make heading and subheading both concise and precise

Duty Rate Types Unconditionally Free Ad Valorem Specific duty rate Compound duty rate

(19CFR) Regulations Chapter 10 Articles conditionally free, subject to a reduced duty rate Special Programs Free Trade Agreements Other Preferential Trade Programs Instruments of International Trade Returned Articles Temporary Imports Actual Use Review this portion of the CBP Regulations to ensure that you have met all of the documentary requirements for any duty free or reduced duty program you are utilizing.

Special Programs Generalized System of Preferences (GSP) A, A*,A+ African Growth and Opportunity Act D Caribbean Basin Economic Recovery Act E, E* Andean Trade Preference Act J, J*, J+ Dominican Republic/Central America (DR/CAFTA) P, P+ Caribbean Basin Trade Partnership R

Free Trade Agreements Australia FTA AU Morocco FTA MA Singapore FTA SG Peru FTA PE Oman FTA OM Korea FT KR Colombia FTA CO Panama FTA PA Bahrain FTA BH NAFTA Canada CA NAFTA Mexico MX Chile FTA CL Israel FTA IL Jordan FTA JO CAFTA-DR P

Other Preferential Trade Programs There are other duty free/reduced duty programs that have nothing to do with the country of origin. Agreement on Trade in Pharmaceutical Products (K) Immediate Chemicals for Dyes (L) Automotive Products Trade Act (B) Agreement on Civil Aircraft (C)

Instruments of International Trade Special IIT bond Residue

Final thoughts Classification is an art, not a science It is subject to interpretation, court cases, and precedent classification expertise is built over time Customs compliance expectation is 94-97% accuracy It is easy to have a misclassification

Our complementary webinar 101 series will continue @ http://www.bdpinternational.com/news-advisories-events/events-seminars/ Import topics on Wednesdays at 10:00 A.M. Central Export topics on Thursdays at 10:00 A.M. Central Registration is required for each event. Upon successful registration, you will receive an email with logon details. (Please check your spam if you do not see information within 24 hours)

Contact information Korrie Thomas Phone: 281-775-8338 Mobile: 832-259-9301 Email: korrie.thomas@bdpinternational.com 15333 JFK Blvd, Suite 700, Houston, TX 77032 To download today s presentation please make note of the following link: http://www.bdpinternational.com/about-bdp/customer-support/resource-center/