Degree Key System Technical Manual Copyright 03-04, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Table of Contents Table of Contents The Degree Advantage DG Key Cuts DG & DG3 Key Cuts 3 Pinning Formula................................................ 4 Construction Master Keying (-Option) Visual Key Control Tamper Proof Packaging Degree Pin Kits Cylinder Parts: DG-34 Rim/ DG-40 Series Mortise 8 Cylinder Parts: 0-DG-40 Series Mortise - Hotel Function 9 Cylinder Parts: DG-34 Rim/ DG-40 Series Mortise 0 Cylinder Parts: DG3-34 Rim/ DG3-40 Series Mortise Cylinder Parts: DG-LFIC Cores Cylinder Parts: DG-LFIC Cores 3 Cylinder Parts: DG3-LFIC Cores 4 Cylinder Parts: DG Bored, Auxiliary, & Integralock Cylinder Parts: 0-DG Bored - Hotel Function Cylinder Parts: DG Bored, Auxiliary, & Integralock Cylinder Parts: DG3 Bored, Auxiliary, & Integralock 8 On The Cover DG-4 Mortise cylinder, Degree Key and Degree DG-300 series core
The Degree Advantage The Degree Key System The patented Degree system from SARGENT provides the right level of security for each opening in your facility. Three levels of ANSI/ BHMA Grade protection, from patented keyway to UL43 certified, secures every opening. A common key for all three levels of security enhances key control and simplifies administrative procedures. Key blanks are controlled through authorized distribution and geographical protection is available. Available for mortise, rim, component and Large Format Interchangeable Core (LFIC) cylinders, SARGENT offers the right Degree of protection for every door in your facility. Benefits Patent protection from unauthorized key duplication through 0 New keyway family protects system integrity from legacy systems Keys are significantly stronger than competitive systems User-friendly design with minimal components provides easy field service Availability in all existing SARGENT cylinder types provides cost-effective upgrade for SARGENT facilities Bump resistance for added protection Degree Level (DG) features a utility patented keyway and provides protection against bumping for mortise, rim and component fixed cylinders. These cylinders easily retrofit into existing hardware and are appropriate for most applications. The keys for DG can only open DG cylinders. Degree Level (DG) builds on the utility patented keyway of DG and adds patented side bar locking with unique angled bottom pins that provide end users with geographical exclusivity. Cylinders provide protection against bumping and picking. Because of its superior key control and patent protection until 0, DG products are recommended for use in conjunction with DG3 for new installations or when retrofitting systems, including large format interchangeable core systems. Degree Level 3 (DG3) combines the utility patented keyway and side bar locking with unique angled bottom pins that provide end users with geographical exclusivity, and adds certification to UL43. They are classified as high security because of their superior resistance to physical attack and protection against unauthorized key duplication. Because of its superior key control, patent protection until 0, and physical strength, we recommend DG3 products for new high-security installations or when retrofitting systems, including large format interchangeable core systems. SARGENT also offers anti-vandal and high security locksets that complement DG3 cylinders for those openings most vulnerable to attack. High Security Security Patented Keyway Open Conventional SARGENT Cylinder & Key Control Products High Security: UL43 Drill & Pick Resistant Systems offer protection against physical attacks. Includes Degree DG3, UL-Signature and UL-Keso. Extra Security: Protection against Controlpicking. Includes Degree DG, Signature and Keso. Patented Keyway: Keys are protected against unauthorized duplication. Includes Degree DG and XC. Intermediate Open Conventional: Legacy systems whose patents Control have run out and are not protected.
DG Key Cuts DG cuts from Bow to Tip MACF=4.0±.00TYP..440±.00 (.30) 90 TYP..±.00 ().4±.00 ().±.00 (3).8±.00 (4).±.00 ().±.00 ().04±.00 3 4 REFERENCE LINE BOTTOM OF KEY Bottom Pins (BP) for DG- cylinders Size # Part No. Length DG-00.3 DG-00. 3 DG-003.9 4 DG-004.3 DG-00.3 DG-00.38 Driver Pins (DP) for DG- standard cylinders Size # Part No. Length DG-00.030 DG-00.00 3 DG-003.090 4 DG-004.0 DG-00.0 DG-04.80 DG-04.0 8 DG-048.40 9 DG-049.0 Master Wafers (MW) for all DG- series Size # Part No. Length DG-00.030 DG-00.00 3 DG-003.090 4 DG-004.0 DG-00.0 Driver Pins (DP) for DG- & DG3- cylinders and all DG- Large Format Interchangeable Cores Size # Part No. Length DG-00.030 DG-00.00 3 DG-003.090 4 DG-004.0 DG-004.0 DG-0044.80 DG-0043.0 8 DG-004.40 9 DG-004.0 Control Drivers (CD) for all DG- Large Format Interchangeable Cores (3 & 4 Chambers) Size # Part No. Length DG-00.030 DG-00.00 3 DG-003.090 4 DG-004.0 DG-00.0 n/a DG-04.0 8 DG-048.40 9 DG-049.0 0 DG-00.300 DG-0.330 Driver Pins (DP) for Bump Resistance (DG Only) Size # Part No. Length 4 DG-003.0 DG-003.0 DG-0034.80 DG-0033.0 8 DG-003.40 9 DG-003.0
DG & DG3 Key Cuts DG DG3 cuts MACF=4 R R C L L C 0 0.0 ±.00TYP..440±.00 (.30) 8 TYP..9±.00 ().9±.00 ().99±.00 (3).9±.00 (4).39±.00 ().09±.00 () 3 4 REFERENCE LINE BOTTOM OF KEY Dimensions shown are to theoretical intersection Bottom Pins (BP) for DG- & DG3- cylinders Master Wafers (MW) for all DG- series First positions (Angled Pins) Size # Angle Part No. Length L DG-0 C DG-0.3 R DG-03 L DG-0 C DG-0. R DG-03 L DG-03 3 C DG-03.9 R DG-033 L DG-04 4 C DG-04.3 R DG-034 L DG-0 C DG-0.3 R DG-03 L DG-0 C DG-0.38 R DG-03 th (last) position Size # Part No. Length DG-00.3 DG-00. 3 DG-003.9 4 DG-004.3 DG-00.3 DG-00.38 Control Drivers (CD) for all DG- Large Format Interchangeable Cores (3 & 4 Chambers) Size # Part No. Length DG-00.030 DG-00.00 3 DG-003.090 4 DG-004.0 DG-00.0 n/a DG-04.0 8 DG-048.40 9 DG-049.0 0 DG-00.300 DG-0.330 Size # Part No. Length DG-00.030 DG-00.00 3 DG-003.090 4 DG-004.0 DG-00.0 Driver Pins (DP) for DG- & DG3- cylinders and all DG- Large Format Interchangeable Cores Size # Part No. Length DG-00.030 DG-00.00 3 DG-003.090 4 DG-004.0 DG-004.0 DG-0044.80 DG-0043.0 8 DG-004.40 9 DG-004.0 3
Pinning Formula Fixed Core Cylinders - All Chambers Large Format Interchangeable Cores (Chambers ---) Large Format Interchangeable Core - Control Chambers (Chambers 3 and 4 Only) Non-LFIC Driver Pin (DP) 0 MINUS Plug Total Master Wafer (MW) Pin = Deepest Minus Shallowest Operating Cut Bottom Pin = Shallowest Operating Cut Instructions Bottom Pin = shallowest operating cut Master Wafer (if required) = Deepest minus shallowest operating cut (Plug Total = Bottom Pin + Master Wafer) Driver Pin = 0 MINUS Plug Total Note: The 0-DG hotel mortise cylinder uses pin change/master keys but with a # depth cut in what would be the th position at the tip of the key. The th chamber is always loaded with a # bottom pin and # 8 driver. All other chambers are loaded as if a standard fixed core cylinder 4 Example Master Key 3 4 4 Change Key 3 4 Driver Pin (DP) 4 Master Wafer (MW) 4 Bottom Pin (BP) 3 Plug Total (MW + BP) LFIC Driver Pin (DP) 3 MINUS Plug Total and Control Driver Control Driver (CD) = Control Cut PLUS MINUS Plug Total Master Wafer (MW) Pin = Deepest MINUS Shallowest Operating Cut Bottom Pin = Shallowest Operating Cut Example Control Key 4 3 Master Key 3 Change Key 3 4 3 Driver Pin (DP) 3 Control Driver (CD) x x 4 x x Master Wafer (MW) 4 3 3 Bottom Pin (BP) 3 Plug Total (MW +BP) Instructions Bottom Pin = shallowest operating cut Master Wafer (if required) = Deepest minus shallowest operating cut (Plug Total = Bottom Pin + Master Wafer) Control Driver (CD) = Control cut PLUS MINUS Plug Total Driver Pin = 3 MINUS Plug Total and CD# = DP
Construction Master Keying (- Option) Construction Master Keying (Lost/Wafer Design) for DG-, DG- & DG3- SARGENT Degree cylinders when master keyed are offered with the convenience of construction keying when specified with the - option. This is not recommended with DG3 key systems or any system where strict key control and management is enforced. Construction keying simplifies the process when the building gets turned over. With this feature, the - cylinder is master keyed with a special construction feature in one of the chambers. The plug is prepped in two places along both sides of the same chamber containing the construction feature. This allows the construction master key to be used during the construction phases. It is highly recommended that all construction keys are collected and accounted for once the project is complete to protect the integrity of the key system. This is not recommended with DG3 key systems or any system where strict key control & management is enforced. New systems supplied with six construction master keys unless otherwise specified. Orders to existing key systems that require additional construction keys are to be specified and ordered separately. Orders with - will have all change keys shipped separately from hardware. Six construction master keys provided per system unless otherwise specified. The - is not available with hotel function cylinders or large format interchangeable cores (300 series). If construction keying is required for LFIC, specify 4-DG- construction keyed cores. Wafer As change key rotates, construction wafer falls into donut hole in the side of plug. Only construction wafer will fall due to hole through its center. Cutaway cylinder showing construction master key being used, putting the wafer below the shear line while key is turned. Note the two empty donut holes on either side of the chamber. Change key rotated to position for extraction. Change key inserted in cylinder putting the wafer at the shear line. Construction key inserted after wafer is trapped. Driver now extends into plug chamber. Construction key if used will not rotate.
Visual Key Control Tamper Proof Packaging Visual Key Control (Stamping) To allow for easier key and cylinder identification, SARGENT offers permanent stamping of keys and/or optional cylinder concealed stamping with industry standard alpha-numeric key set symbols. All DG keys are stamped with key set symbol and DO NOT DUPLICATE as standard. All DG master and control keys are stamped with the key set symbol and the key system register # cylinders as standard, (Item B) unless alternate stamping is requested on the order. Master level keys do not include bitting numbers. Master level keys include system register numbers stamped on the first line and the standard visual key control designations on the second line (Item B). Change keys have one line for up to characters for key set stamping available for permanent Visual Key Control Key and cylinder identified by industry standard alpha-numeric keyset symbols Cylinder-slide stamping available on mortise, rim, LFIC and all bored cylinders except for 8-Line and 00 (Items C, D, & E) Core side engraving available for 8-Line and 00 (Item F) Keyway Example system number AB PAT. NO.,,08 DO NOT DUPLICATE Key Set Symbol to identify factory-cut key PAT. NO.,,08 DO NOT DUPLICATE Example of keyset Item A Change (Day) Key Stamping Tamper Proof Packaging For the highest level of security for the end user, tamper proof packaging is used on all Degree master keys and key blanks. This heat sealed shrink wrap identified with SARGENT Sealed For Your Security provides assurance of the integrity of the factory generated key system. Item D Item B Master Level Key Stamping Item E Item F Item C
Degree Pin Kits 43 DG Standard Pinning Kit The 43 DG Kit is used to pin DG fixed and LFIC cylinders. The heavy duty steel kit prevents pins from mixing. The kit includes: - 00 each of bottom pins sizes - - 00 each of control drivers sizes - - 00 each of driver pins sizes -9-00 each of bump resistant pins sizes 4-9 - sidebar springs part number DG-009-00 KIK spring cover part number 3-34 - KIL/MRT/RIM/LFIC spring cover DG-0040-0 each Sidebar (LFIC only) part number DG-88-00 each compression spring part number DG-00-00 each compression spring (LFIC only) part number DG-009 - Tweezer - Degree key gauge See pages and 3 for individual pin part #s. The kit has additional empty compartments for future upgrades to DG and DG3 cylinders. The 43 DGM Master Kit has all pins needed for pinning DG, DG and DG3 cylinders. 43 DGM Master Shown 43 DGM Master Pinning Kit The 43 DGM Master Kit includes all pins needed to re-pin DG, DG and DG3 cylinders. Kit includes all the same components as in the 43 DG kit, with the additional parts to service DG and DG3 cylinders. - 0 each Side bar part number DG 00 - each slider spring part number DG 000-00 each of Left, Center and Right Chisel Bottom Pins sizes thru See pages and 3 for individual part numbers. Cylinder Spray Lubricant Degree cylinders are mechanical devices and require preventive maintenance. At a minimum, Degree cylinders should be lubricated twice a year; more if installed in extreme installations. Degree cylinders should not be exposed to chemical washes or painted. 3.0 oz aerosol part number 8-000. Cylinder Spray Cleaner/Deicer: 3.0 oz aerosol part number 8-043.
Cylinder Parts: DG-34 Rim/ DG-40 Series Mortise DG-34 Rim/ DG-40 Series Mortise Cylinder Parts Item Description Part Number Where Used / Cylinder Length Comment DG-894 DG-34 DG-9 DG-4 & 8-DG-4 -/8" (9mm) Plug DG-9 DG-4 & 8-DG-4 -/4" (3mm) DG-93 DG-43 & 8-DG-43-3/8" (3mm Plug finishes: 04, DG-94 DG-44 -/" (38mm) DG-9 DG-4-3/4" (44mm) DG-0 DG-4 & DG-34 -/8" (9mm) DG-0 DG-4 -/4" (3mm) Shell finishes: 03, 04, 09, DG-03 DG-43-3/8" (3mm) 0, 0B, 0BL, 4,, Cylinder Shell DG-04 DG-44 -/" (38mm) 0D,, D DG-0 DG-4-3/4" (44mm) DG-0 8-DG-4 -/8" (9mm) No finish. DG-0 8-DG-4 -/4" (3mm) For use with mortise locks DG-03 8-DG-43-3/8" (3mm) with LE3 or LE4 trim only. 3 Conical Bottom Pin See Page and 3 DG-40 Series Mortise & DG-34 Rim 4 Master Wafer See Page and 3 DG-40 Series Mortise & DG-34 Rim Bump-Resistant Driver Pin See Page and 3 DG-40 Series Mortise & DG-34 Rim Compression Spring DG-00 DG-40 Series Mortise & DG-34 Rim Cam See Degree Catalog DG-40 Series Mortise 8 Screw DG-00 DG-40 Series Mortise # - x /" (8mm) PH. FL. 0 Retainer DG-0090 DG-34 Rim Tailpiece Retainer DG-09 DG-34 Rim Tailpiece DG-09 DG-34 Rim 3 Spring Cover DG-0040 DG-40 Series Mortise & DG-34 Rim 4 Standard Connecting Screws 3-004 DG-34 Rim # -4 x -/8" (4mm) Rim Cylinder Back Plate 3-008 DG-34 Rim 8 3 3 4 8 0 4
Cylinder Parts: 0-DG-40 Series Mortise - Hotel Function 0-DG-40 Series Mortise Cylinder Parts For use with 8/80 lock sets only Item Description Part Number Where Used / Cylinder Length Comment Plug DG-93 0-DG-43-3/8" (3mm) DG-94 0-DG-44 -/" (38mm) Plug finishes: 04, Cylinder Shell DG-030 0-DG-43-3/8" (3mm) Shell finishes: 03, 04, 09, 0, DG-03 0-DG-44 -/" (38mm) 0B, 0BL, 4,, 0D,, D 3 Hotel Function Sleeve DG-034 0-DG-43-3/8" (3mm) DG-03 0-DG-44 -/" (38mm) 4 Conical Bottom Pin See Page and 3 All Cylinders th chamber always uses # bottom pin Master Wafer See Page and 4 All Cylinders Bump-Resistant Driver Pin See Page and All Cylinders Driver Pin DG-004 All Cylinders th chamber always uses #8 driver 8 Compression Spring DG-00 All Cylinders Front six pin chambers 9 Compression Spring, LFIC DG-009 All Cylinders Unique to the th chamber only 0 Cam DG-808 0-DG-43/44 cylinders only Screw DG-00 All Cylinders #- x /" (8mm) PH. FL. Spring Cover (-pin) DG-0038 0-DG-43/44 cylinders only 9 8 4 Note: Hotel function cylinders require planing in the on set of design of a key system, consult key records for compatibility of existing systems 3 0 9
Cylinder Parts: DG-34 Rim/ DG-40 Series Mortise DG-34 Rim / DG-40 Series Mortise Cylinder Parts Item Description Part Number Where Used / Cylinder Length Comment DG-09 DG-34 DG-04 DG-4 & 8-DG-4 -/8" (9mm) Plug DG-04 DG-4 & 8-DG-4 -/4' (3mm) DG-043 DG-43 & 8-DG-43-3/8" (3mm Plug finishes: 04, DG-044 DG-44 -/" (38mm) DG-04 DG-4-3/4" (44mm) DG-03 DG-4 & DG-34 -/8" (9mm) Cylinder Shell 0 DG-03 DG-4 -/4" (3mm) DG-033 DG-43-3/8" (3mm) DG-034 DG-44 -/" (38mm) DG-03 DG-4-3/4" (44mm) DG-03 8-DG-4 -/8" (9mm) No finish. DG-03 8-DG-4 -/4" (3mm) DG-033 8-DG-43-3/8" (3mm) Shell finishes: 03, 04, 09, 0, 0B, 0BL, 4,, 0D,, D For use with mortise locks with LE3 or LE4 trim only. 3 Chisel Tipped Bottom Pin See Page and 3 DG-40 Series Mortise & DG-34 Rim In pin chambers through 4 Conical Bottom Pin See Page and 3 DG-40 Series Mortise & DG-34 Rim In pin chamber only Master Wafer See Page and 3 DG-40 Series Mortise & DG-34 Rim Driver Pin See Page and 3 DG-40 Series Mortise & DG-34 Rim Compression Spring DG-00 DG-40 Series Mortise & DG-34 Rim 8 Slider CM DG-008 DG-40 Series Mortise & DG-34 Rim For keys with a # slider cut 9 Slider Spring DG-000 DG-40 Series Mortise & DG-34 Rim 0 Sidebar Spring DG-009 DG-40 Series Mortise & DG-34 Rim Sidebar DG -88 DG-40 Series Mortise & DG-34 Rim Cam See Degree Catalog DG-40 Series Mortise 3 Screw DG-00 DG-40 Series Mortise # - x /" (8mm) PH. FL. Retainer DG-0090 DG-34 Rim Tailpiece Retainer DG-09 DG-34 Rim Tailpiece DG-09 DG-34 Rim 8 Spring Cover DG-0040 DG-40 Series Mortise & DG-34 Rim 9 Standard Connecting Screws 3-004 DG-34 Rim # -4 x -/8" (4mm) 0 Rim Cylinder Back Plate 3-008 DG-34 Rim 8 9 8 3 4 0 3 0 9
Cylinder Parts: DG3-34 Rim/ DG3-40 Series Mortise DG3-34 Rim / DG3-40 Series Mortise Cylinder Parts Item Description Part Number Where Used / Cylinder Length Comment DG-89 DG3-34 DG-88 DG3-4 & 8-DG3-4 -/8" (9mm) Plug DG-88 DG3-4 & 8-DG3-4 -" (3mm) DG-883 DG3-43 & 8-DG3-43 -3/8" (3mm Plug finishes: 04, DG-884 DG3-44 -/" (38mm) DG-88 DG3-4 -3/4" (44mm) DG-04 DG3-4 & DG3-34 -/8" (9mm) DG-04 DG3-4 -/4" (3mm) Shell finishes: 03, 04, 09, DG-043 DG3-43 -3/8" (3mm) 0, 0B, 0BL, 4,, Cylinder Shell DG-044 DG3-44 -/" (38mm) 0D,, D DG-04 DG3-4 -3/4" (44mm) DG-04 8-DG3-4 -/8" (9mm) No finish. DG-04 8-DG3-4 -/4" (3mm) For use with mortise locks DG-043 8-DG3-43 -3/8" (3mm) with LE3 or LE4 trim only. 3 Chisel Tipped Bottom Pin See Page and 3 DG3-40 Series Mortise & DG3-34 Rim In pin chambers through 4 Conical Bottom Pin See Page and 3 DG3-40 Series Mortise & DG3-34 Rim In pin chamber only Master Wafer See Page and 3 DG3-40 Series Mortise & DG3-34 Rim Driver Pin See Page and 3 DG3-40 Series Mortise & DG3-34 Rim Compression Spring DG-00 DG3-40 Series Mortise & DG3-34 Rim 8 Slider CM DG-008 DG3-40 Series Mortise & DG3-34 Rim For keys with a # slider cut 9 Slider Spring DG-000 DG3-40 Series Mortise & DG3-34 Rim 0 Sidebar Spring DG-009 DG3-40 Series Mortise & DG3-34 Rim Sidebar DG -88 DG3-40 Series Mortise & DG3-34 Rim Security Plate DG-00 DG3-40 Series Mortise & DG3-34 Rim Required for UL43 3 Cam See Degree Catalog DG3-40 Series Mortise 4 Screw DG-00 DG3-40 Series Mortise # - x /" (8mm) PH. FL. Retainer DG-0090 DG3-34 Rim Tailpiece Retainer DG-09 DG3-34 Rim 8 Tailpiece DG-09 DG3-34 Rim 9 Spring Cover DG-0040 DG3-40 Series Mortise & DG3-34 Rim 0 Standard Connecting Screws 3-004 DG3-34 Rim # -4 x -/8" (4mm) Cylinder Back Plate 3-008 DG3-34 Rim 8 9 0 9 3 4 3 4 8 0
Cylinder Parts: DG-LFIC Cores DG LFIC Cores Item Description Part Number Comment Plug DG-000 Plug finishes: 04, Cylinder Shell DG-090 Shell finishes: 04, 3 Control Sleeve DG-0 4 Conical Bottom Pin See Page and 3 Master Wafer See Page and 3 Control Pin See Page and 3 Driver Pin See Page and 3 8 Compression Spring, LFIC DG-009 Control Sleeve Pin Chambers Only 9 Compression Spring DG-00 All Other Pin Chambers 0 Plug Retainer DG-0090 Sidebar Spring DG-009 Sidebar DG-00 3 Spring Cover DG-0040 3 8 9 4 0 3
Cylinder Parts: DG-LFIC Cores DG LFIC Cores Item Description Part Number Comment Plug DG-00 Plug finishes: 04, Cylinder Shell DG-09 Shell finishes: 04, 3 Control Sleeve DG-0 4 Chisel Tipped Bottom Pin See Page and 3 In pin chambers through Conical Bottom Pin See Page and 3 In pin chamber only Master Wafer See Page and 3 Control Pin See Page and 3 8 Driver Pin See Page and 3 9 Compression Spring, LFIC DG-009 Control Sleeve Pin Chambers Only 0 Compression Spring DG-00 All Other Pin Chambers Slider CM DG-008 For keys with a # slider cut Slider Spring DG-000 3 Sidebar Spring DG-009 4 Sidebar DG-88 Plug Retainer DG-0090 Spring Cover DG-0040 9 0 4 3 4 8 3 3
Cylinder Parts: DG3-LFIC Cores DG3 LFIC Cores Item Description Part Number Comment Plug DG-90 Plug finishes: 04, Cylinder Shell DG-09 Shell finishes: 04, 3 Control Sleeve DG-0 4 Chisel Tipped Bottom Pin See Page and 3 In pin chambers through Conical Bottom Pin See Page and 3 In pin chamber only Master Wafer See Page and 3 Control Pin See Page and 3 8 Driver Pin See Page and 3 9 Compression Spring, LFIC DG-009 Control Sleeve Pin Chambers Only 0 Compression Spring DG-00 All Other Pin Chambers Slider CM DG-008 For keys with a # slider cut Slider Spring DG-000 3 Sidebar Spring DG-009 4 Sidebar DG-88 Plug Retainer DG-0090 Spring Cover DG-0040 9 4 0 4 3 4 8 3
Cylinder Parts: DG Bored, Auxiliary & Integralock DG Bored, Auxiliary, & Integralock Cylinder Parts Item Description Part Number Where Used / Cylinder Length Comment Plug with tailpiece retainer (item ) DG-30,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks) Plug with roll pin DG-30, 8, 9 Line Cylinders (Knob Locks) Cylinder Shell Plug DG-309 40, 40, 480, 00DB Series Deadbolt Cylinders Plug DG-3043 00 Integralock Cylinder DG-0 DG-0 DG-0 DG-0,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks), 8, 9 Line Cylinders (Knob Locks) 40, 40, 480, 00DB Series Deadbolt Cylinders 00 Integralock Cylinder 3 Conical Bottom Pin See Page and 3 All Cylinders 4 Master Wafer See Page and 3 All Cylinders Driver Pin See Page and 3 All Cylinders Compression Spring DG-00 All Cylinders Tailpiece Retainer 3-080,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks) 8 Tailpiece 3-089, 8L, 0, 00, 00 Line Cylinders (Lever Locks) 3-38 Line Cylinders 3-090 Line (S & N knobs) Cylinders 3-0908 Line (B knob) Cylinders Plug finishes: 04, No finish 9 Plug Retainer DG-0090,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks), 8, 9 Line Cylinders (Knob Locks) 00 Integralock Cylinder 0 Plug Retainer (Deadbolt) DG-00 40, 40, 480, 00DB Series Deadbolt Cylinders Retainer Screw DG-0 40, 40, 480, 00DB Series Deadbolt Cylinders # - x /4" (mm) PH. PAN Tailpiece 3 Spring Cover DG-8 DG-8 3-34 DG-0039 3 Single-Cylinder Deadbolts Double-Cylinder Deadbolts,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks) 40, 40, 480, 00DB Series Deadbolt Cylinders 3, 8, 9 Line Cylinders (Knob Locks) 00 Integralock Cylinder 4 9 8 0
Cylinder Parts: 0-DG Bored - Hotel Function 0-DG Bored Cylinder Parts Item Description Part Number Where Used Comment DG-09 0-0 Line Cylinders Plug DG-09 0- Line Cylinders Plug finishes: 04, DG-09 0-8 Line Cylinders Cylinder Shell DG-0 0-0 Line Cylinders DG-0 0-8 Line & 0- Line Cylinders No Finish 3 Conical Bottom Pin See Page and 3 All Cylinders 4 Master Wafer See Page and 4 All Cylinders Bump-Resistant Driver Pin See Page and All Cylinders Compression Spring DG-00 All Cylinders Plug Retainer DG-0090 All Cylinders 8 Tailpiece Retainer 3-080 0-0 Line Cylinders 9 Tailpiece 3-084 0-0 Line Cylinders 0 Indicator Button 3-0 0-0 Line Cylinders Indicator Button Spring 0-00 0-0 Line Cylinders Indicator Button Pin 0-003 0-0 Line Cylinders 3 Visual Indicator 08-083 0-8 Line & 0- Line Cylinders 4 Visual Indicator Spring 08-03 0-8 Line & 0- Line Cylinders Shipped with 0- Function Lockset Key Block-Out 08-09 0-8 Line & 0- Line Cylinders Spring Cover DG-0039 All Cylinders 4 3 0 4 8 9 3
Cylinder Parts: DG Bored, Auxiliary & Integralock DG Bored, Auxiliary, & Integralock Cylinder Parts Item Description Part Number Where Used / Cylinder Length Comment Plug with tailpiece retainer (item ) DG-30,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks) Plug with roll pin DG-30, 8, 9 Line Cylinders (Knob Locks) Plug finishes: 04, Plug DG-0 40, 40, 480, 00DB Series Deadbolt Cylinders Plug DG-0 00 Integralock Cylinder DG-0,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks) Cylinder Shell DG-0, 8, 9 Line Cylinders (Knob Locks) DG-0 40, 40, 480, 00DB Series Deadbolt Cylinders No finish DG-0 00 Integralock Cylinder 3 Chisel Tipped Bottom Pin See Page and 3 All Cylinders In pin chambers through 4 Conical Bottom Pin See Page and 3 All Cylinders In pin chamber only Master Wafer See Page and 3 All Cylinders Driver Pin See Page and 3 All Cylinders Compression Spring DG-00 All Cylinders 8 Slider CM DG-008 All Cylinders For keys with a # slider cut 9 Slider Spring DG-000 All Cylinders 0 Sidebar Spring DG-009 All Cylinders Sidebar DG -88 All Cylinders Tailpiece Retainer 3-080,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks) 3-089, 8L, 0, 00, 00 Line Cylinders (Lever Locks) 3 Tailpiece 3-38 Line Cylinders 3-090 Line (S & N knobs) Cylinders 3-0908 Line (B knob) Cylinders 4 Plug Retainer DG-0090,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks), 8, 9 Line Cylinders (Knob Locks) 00 Integralock Cylinder Plug Retainer (Deadbolt) DG-00 40, 40, 480, 00DB Series Deadbolt Cylinders Retainer Screw DG-0 40, 40, 480, 00DB Series Deadbolt Cylinders # - x /4" (mm) PH. PAN Tailpiece DG-8 Single-Cylinder Deadbolts DG-8 Double-Cylinder Deadbolts 3-34,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks) 40, 40, 480, 00DB Series Deadbolt Cylinders 8 Spring Cover DG-0039 3 8, 8, 9 Line Cylinders (Knob Locks) 00 Integralock Cylinder 0 4 9 8 4 3
Cylinder Parts: DG3 Bored, Auxiliary & Integralock DG3 Bored, Auxiliary, & Integralock Cylinder Parts Item Description Part Number Where Used / Cylinder Length Comment Plug with tailpiece retainer (item ) DG-303,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks) Plug with roll pin DG-303, 8, 9 Line Cylinders (Knob Locks) Plug finishes: 04, Plug DG-3030 40, 40, 480, 00DB Series Deadbolt Cylinders Plug DG-3044 00 Integralock Cylinder DG-0,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks) Cylinder Shell DG-0, 8, 9 Line Cylinders (Knob Locks) DG-0 40, 40, 480, 00DB Series Deadbolt Cylinders No finish DG-0 00 Integralock Cylinder 3 Chisel Tipped Bottom Pin See Page and 3 All Cylinders In pin chambers through 4 Conical Bottom Pin See Page and 3 All Cylinders In pin chamber only Master Wafer See Page and 3 All Cylinders Driver Pin See Page and 3 All Cylinders Compression Spring DG-00 All Cylinders 8 Slider CM DG-008 All Cylinders For keys with a # slider cut 9 Slider Spring DG-000 All Cylinders 0 Sidebar Spring DG-009 All Cylinders Sidebar DG -88 All Cylinders Tailpiece Retainer 3-080,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks) 3-089, 8L, 0, 00, 00 Line Cylinders (Lever Locks) 3 Tailpiece 3-38 Line Cylinders 3-090 Line (S & N knobs) Cylinders 3-0908 Line (B knob) Cylinders 4 Plug Retainer DG-0090,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks), 8, 9 Line Cylinders (Knob Locks) 00 Integralock Cylinder Plug Retainer (Deadbolt) DG-00 40, 40, 480, 00DB Series Deadbolt Cylinders Retainer Screw DG-0 40, 40, 480, 00DB Series Deadbolt Cylinders # - x /4" (mm) PH. PAN Tailpiece DG-8 Single-Cylinder Deadbolts DG-8 Double-Cylinder Deadbolts 3-34,, 8L, 0,, 00, 00 Line Cylinders (Lever Locks) 40, 40, 480, 00DB Series Deadbolt Cylinders 8 Spring Cover 8 DG-0039 3 8, 8, 9 Line Cylinders (Knob Locks) 00 Integralock Cylinder 0 4 9 8 4 3
SARGENT Manufacturing Company 00 Sargent Drive New Haven, CT 0 USA 800--4 www.sargentlock.com Founded in the early 800s, SARGENT is a market leader in locksets, cylinders, door closers, exit devices, electro-mechanical products and access control systems for new construction, renovation, and replacement applications. The company s customer base includes commercial construction, institutional, and industrial markets. Copyright 03-04, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. 90:G 0//4