With SIP Proxy Server It s all about Reducing Cost!!!
WHY ADVANCED LCR (Least Cost Routing) Advanced LCR is a product by Advanced Communications; the same parent company of AdvancedVoIP.com, a widely used billing system by VoIP providers. The product comes from years of insight into the telecommunications and specially VoIP market place and real needs of VoIP operators to do least cost routing in a real world environment. NEXT STEPS Get Support AVPL (AdvancedVoIP.com) offers 24*7 technical support to its clientele. If you need any kind of technical assistance while using our product or have any ambiguity regarding the product, please feel free to contact us at support@advancedvoip.com
Advanced LCR Advanced LCR provides next generation routing optimization solution that ensures service providers to automate and manage their routing processes by providing real time business intelligence on costs, profit margins, network issues etc. Figure 01: Standalone LCR Model Advanced LCR s routing method is comprehensive enough to ensure following factors: LCR data is loaded and stored in RAM i.e. RAM resident that ensures quick access of information. Financial matters in vendor agreements, complicated rate sheets, volume commitments and discounts. Network capabilities and constraints like near real-time measurements of network traffic volume, QoS and capacity. User defined business rules that improves quality and other standards for every switch, route class and includes override management.
Advanced LCR provides a user friendly interface that ensures definition of routing parameters. It enables routing collaboration and provisioning in the delivery of routing scheme. Figure 02: Working of LCR Model It allows carriers to modify rates/routes any time, for any terminator, without restarting the application. The solution supports the conventional voice switches and IP softswitches as well. Hence, it allows service providers to change routing schemes and rates in no minutes. Moreover, Advanced LCR is absolutely functional with SIP Proxy Server as the following figure shows:
Figure 03: LCR with SIP Proxy Server Advanced LCR not only searches for the best optimum route for call delivery in terms of cost but it also maintains the overall call quality. It precisely monitors the ASR (Answer/Seizure Ratio) of all the available routes and eliminates the route having minimum ratio from the final list of multiple routes. Both the scenarios working of LCR in terms of Cost and Quality are best illustrated in the figures shown below:
Figure 04: Working of LCR on QoS basis
Figure 05: Static Routing (Working of LCR on Least Cost Basis) Also, it is comprehensive enough to completely manage distinct rates offered by different terminators for different time slots in a day. Some terminators offer the same rate for the entire day while some offer peak/off-peak rates separately. Thus, Advanced LCR proficiently handles different time rates for the same day.
Figure 06: Working of LCR on the basis of time Business Benefits Reduces costs and increases profit margins Implements global routing strategies in near real time Reacts a bit faster to financial risks and changing network conditions
Disadvantages of not using LCR Inability to handle a large number of terminators Tedious updating of static routing tables. Frequent errors and out of synchronization of static tables Difficult to reroute failed calls in real time while the call is being setup Difficult to change routes when a route fails Difficult to change routes when credit expires with any terminator Difficult to stop traffic over flow to limited capacity routes. Therefore without a LCR, telcos usually do one of two things. Keep a single account with an A Z terminator and send all traffic to him. Keep account with few terminators and manually manage the traffic routing. It is a known fact that without LCR, there is almost a 5% to 30% extra cost in calls delivery depending on technology the telecom uses. With telecom margins shrinking worldwide, this saving of 5% to 30% can translate into a 50% to 100% increase in the profit margin.
TECHNICAL SPECIFICATIONS Session Routing Port Count Precedence/accessibility of destination GW RADIUS API for interaction with add-on routing systems Load Balancing Failover among gateways Between signaling servers distributed configuration (for better fault-tolerance) Interoperability Support for SIP dialects Direct IP connectivity with SIP based IP PBX Network Security Call Admission Control (max calls on an ingress, max calls on egress, total max calls per direction/route) Call authentication by IP address based on data from internal configurations Call Statistics and Analysis Real time monitoring of ASR, QoS, ACD, disconnect codes and more Call statistics monitoring by destination/gw CDR-based call analysis CDR in plain text format convenient for analysis and preliminary debugging CDR filtering by any call parameter Billing and Accounting Single point for CDR collection 38 fields for exhaustive call analysis and preliminary debugging (Call ID, Disconnect Codes, Connect Time, Elapsed Time and more) All relevant call details for complex billing at end-users Cisco VSA compliant Real-time and postpaid billing
Interface to LCR Client SIP based RADIUS based Accounting RADIUS based File based Direct Database SIP v 2.0 Operating Systems RedHat Linux 7.3, 9.0 Fedora SUSE Manageability Web based GUI for remote monitoring and control Configuration files in plain text format Web monitor (web based utility for remote system monitoring) Integrated with AdvancedVoIP billing Can be interfaced with any other billing system Can be interfaced with any softswitch through Radius or SIP Scalability Scalable from 30 up to 5000 concurrent calls Upgradeable within less than 5 minutes 5,000 concurrent calls capacity scalable to 100,000 concurrent calls. Can take up to 1,000,000 BHCA in a cluster configuration. Redundant Redundant Fault tolerant High Availability Scalable Embedded watch-dog timer