Mirage Bastone automatic back-flush program non-spattering hot water delivery large boiler with one heat-exchanger per group, thermo-syphon system extra long lower tubes for cool running enlarged cavity in group for heat-loop water variety of precise restrictors available, easy to exchange group solenoid valves attached to frame inside machine as extra heat-sink, no electric devices in splash zone, no spattering at discharge of group heating element severely protected by time-out boiler fill valve, a safety probe and overheating protection connected directly to element inside boiler electronic pre-infusion with correctly tuned delays, to be switched on or off long injector tube into heat-exchanger to use its full capacity small sensitive pressostat switching solid state relays large drain tray, adjustable in height Pictured: Mirage Triplette Classic Bastone
Mirage Standard filter holders with downward angled handle for an ergonomically better wrist position long steam wands in stainless steel with ample free space, pivoting in all directions powerful and long lasting steam power manual steam valves require 1 quarter turn from closed to fully open hot water delivery with automatic stop, quantity easily adjustable jets of 0.6mm at entrance of group solenoid for temperature stability and infusion entire frame built from heavy 3mm stainless steel, powder coated in black epoxy very barista-comfortable machine, with all parts in easy sight and reach automatic re-filling of main boiler only when no coffee is brewed external pump long list of options to customize machine to your needs Pictured: Mirage Duette Veloce
Mirage Idrocompresso most dramatic espresso machine imaginable, levers moving up and down is pure theatre very dry coffee puck groups remain clean for a remarkably long time, as there is no pressure relief from top of coffee puck no back flushing needed group shuts off automatically after delivering 60cc very reliable, silent and easy to service equipped with thermo-siphon heat exchanger for each group, no water from main boiler to brew coffee isolating ring inside group to further stabilize temperature equipped with ball valve ahead of each thermo-siphon system to open up group without switching off entire machine magnificent infusion: a column of water, nicely divided over entire coffee bed, sinks into the ground coffee both temperature and pressure diminish slightly during brewing for optimum extraction pulse free pressure on coffee double pressure gauge installed to keep an eye on incoming water pressure non-spattering hot water delivery hot water delivery with adjustable electronic timer Pictured: Mirage Duette Veloce Idrocompresso
Duette (two-group) or Triplette (three-group) Bodywork as Classic (high gloss stainless steel bodyparts with glass side panels) or Veloce (engine turned stainless steel with milled and painted high gloss aluminium side panels) Operated through touch pads (Standard), semi-automatic flipper style rods (Bastone) or the old style levergroups (Idrocompresso). foot activated steam valve, left and/or right side pitcher tray, adjustable in height independently from draintray, left and/right hand side enlarged cup tray on top of machine, covering full length of machine extra elevated cup tray above machine, covering full length of machine bottomless filterholder(s) filterholder(s) with inside coating of Teflon progressive pre-infusion cylinders espresso cup grille on top of drain tray your logo sandblasted into the thick glass panels of Classic, or color printed on folio stuck onto inner side of glass raised heating power in Duette, from 3200Watt to 4800Watt
Height 52 52 Height Idrocompresso 78 78 Depth 67 67 Width of body 73 92 Width incl. steamwands 91 111 Depth 50 50 Width at operators side 55 74 Width at rear 32 52 Heating element 3200 Watt 6000 Watt Total wattage 230V-3680W 230V-6500W Boiler capacity 14 litres 22 litres