Testking.E20-891.118Q

Testking.E20-891.118Q Number: E20-891 Passing Score: 800 Time Limit: 120 min File Version: 4.6 http://www.gratisexam.com/ E20-891 Backup Recovery Solutions Expert Exam for Technology Architects It would be really helpful for all those people who want pass exam without any ambiguity. Awesome works, thanks for create easiness for us people. Valid. With a bit of work you will pass easily even you can score 100% by study it properly. Best stuff I have ever used for my exam preparation. I love Examcollection guys. Got this vce from my friend who passed with 91%, each and every stuff in it. I am sharing with you guys.

Exam A QUESTION 1 A company just converted its physical server environment to a virtual environment using vsphere 5. They have asked you to assist with creating a backup strategy for their virtual machines. One of the primary concerns for the company is that they are able to backup an entire virtual machine without installing any agents on it. Which vsphere feature will provide this capability? A. vstorage APIs for Data Protection B. VMware Consolidated Backup C. vstorage APIs for Array Integration D. VMware Storage Integrator answer is good. QUESTION 2 A customer recently implemented an EMC Data Domain into their existing NetWorker environment. Data Domain device types have been created to perform client backups. Backups have been working successfully with minimal failures. The customer has received a restore request, through an internal customer, to restore a deleted file. After successfully locating the deleted file and initiating the restore, the restore fails. What is a reason the restore is failing? A. RO device is not mounted B. RW device is too busy C. RO device was not labeled D. RW device is not mounted perfect answer. QUESTION 3 An EMC customer uses an Avamar server with an integrated Data Domain system at their data center to protect a number of Microsoft Exchange servers and Oracle databases. The customer also has several remote offices. Each remote office has a single node Avamar server backing up the local clients. All backups from the remote offices are replicated to the data center. Following an acquisition, the company needs to add 10 new remote offices to its Avamar data protection solution. Three of these offices host Oracle databases with approximately 8 TB in size. All backup data from the remote sites need to be replicated to the primary data center while keeping the data traffic on the WAN to a minimum. They also want to maintain centralized management and reporting capabilities. Based on EMC best practices, how can this be accomplished? A. Deploy an Avamar server in every office and an integrated Data Domain system in each of the three remote offices with Oracle databases. B. Deploy an Avamar server in every office, replicating to the central data center. C. Deploy Avamar clients on every client to be protected, sending backup data to a central Avamar server.

D. Deploy an Avamar server in every office, and Accelerator nodes to back up the large databases to Data Domain systems at the primary data center. : QUESTION 4 A customer has determined that they do not want to risk their EMC NetWorker temporary directory filling up when they backup their NDMP host. They have decided to relocate this directory. In addition, the customer has performed some data analysis and discovered that they will be backing up two million files of approximately 2K in size and 128 bytes in the name length. Which NetWorker variable needs to be defined and how much space should be available for the NetWorker temporary directory? http://www.gratisexam.com/ A. NSR_NDMP_TMP_DIR; 544 MB B. NSR_NDMP_TMP_DIR; 1088 MB C. NSR_SHARED_DISK_DIR; 544 MB D. NSR_SHARED_DISK_DIR; 1088 MB Correct Answer: B answer is right. QUESTION 5 A new EMC Avamar customer has been backing up three Oracle databases successfully for the past several weeks. One of the databases has become corrupted and they would like to perform a point-in- time restore of the database. To what point is recovery performed if the default point-in-time recovery mode is selected? A. Most recent system change number B. User-provided log sequence number C. Most recent full backup D. User-provided timestamp : QUESTION 6 Click on the calculator icon in the upper left corner. A customer has an EMC Celerra with 13 million files. The customer is using EMC NetWorker on Linux to run nightly full backups. If the average filename length is 64 bytes, what is the minimum /nsr/tmp size

required? A. 3856 MB B. 4838 MB C. 5408 MB D. 7832 MB Correct Answer: C : QUESTION 7 An EMC NetWorker customer needs to add their new Microsoft SharePoint standalone farm to their backup environment. They want to provide both operational and disaster recovery protection. For disaster recovery purposes, what must be included in the backup plan? A. At least one snapshot sent to conventional backup medium B. At least two snapshots per day C. Use of a VSS hardware provider D. Client resource for every server in the farm : QUESTION 8 An EMC customer is having an issue with a virtual proxy backup of a large file server. The datastore appears to be showing alerts in vcenter Management because the datastore is nearing capacity. What is the recommended minimum amount of free space on the datastore? A. 10% B. 15% C. 20% D. 25% Correct Answer: C answer is definite. QUESTION 9 If multiple backup streams are written to a backup device at the same time, which feature is being used? A. Server parallelism B. Twinning C. Multiplexing D. Client parallelism Correct Answer: B

: QUESTION 10 You are designing an EMC NetWorker to Data Domain backup solution for a customer using DD Boost. The customer plans to configure an old server to use as a storage node for the Data Domain backups. Which factor, in the backup environment, affects the amount of memory that this server should have for optimal backup performance? A. Number of Data Domain devices B. Amount of backup data C. Number of backup clients D. Size of the Data Domain system elaborated properly. QUESTION 11 An EMC customer is planning to implement an Avamar solution to protect their Microsoft SQL databases. Each database has multiple filegroups. The customer requires the SQL databases to be recovered to a different server. What will a redirected restore use to meet this requirement? A. SQL backup format file B. SQL transaction log file C. Incremental SQL backup D. Differential SQL backup : QUESTION 12 Click on the calculator icon in the upper left corner. A customer has an EMC Celerra with two 3 TB CIFS shares in their data center. The data center is equipped with 1 Gb TCP/IP network and 4 Gb SAN infrastructure. The customer has a requirement for full backups once a week and level 1 backups the remaining six days of the week. Considering the customer has a Fiber Channel tape library with two LTO-3 tape drives that can write at a speed of 120 MB/s, which solution meets the customer's 8-hour backup window? A. NetWorker and shared drives between the backup server and the Celerra B. NetWorker with both drives zoned only to the Celerra C. Add a Linux storage node with 10 Gb NIC and configure DSA backups D. Allocate one tape drive to the backup server and one tape drive to the Celerra

: QUESTION 13 A customer has asked you to design a Microsoft Exchange backup solution. The Exchange environment includes both Exchange Server 2007 and 2010. EMC NetWorker Module for Microsoft is proposed. What is the granularity of the backup solution? A. Individual Exchange 2007 storage groups and Exchange 2010 databases B. Individual Exchange 2007 databases and Exchange 2010 storage groups C. Individual Exchange 2007 storage groups and Exchange 2010 storage groups D. Individual Exchange 2007 mailboxes and Exchange 2010 storage databases : QUESTION 14 A customer has a large ESX environment managed by one vcenter server. They want a backup solution using EMC NetWorker and Data Domain devices. They want to perform SAN-based backups using physical NetWorker proxy hosts. In addition, they want to run 150 virtual machine backups at the same time. When creating a backup design for this environment, what is a vcenter consideration? A. Reducing the amount of simultaneous image backups B. Deploying three physical proxy hosts C. Using DD Boost to increase the amount of virtual machines per proxy D. Deploying two physical proxy hosts with DD Boost : QUESTION 15 An EMC NetWorker customer has asked you to design a Microsoft SharePoint backup solution using NMM. The SharePoint environment is configured as a distributed farm consisting of two web front-end servers, three SQL database servers, and two query servers. Which tasks need to be performed for recovery of a SharePoint object? A. To recover the SharePoint content database1. Start NMM recovery session from the web front-end server2. Recover content database B. To recover the SharePoint content database:1. Start NMM recovery session from the SQL server2. Recover content database and SharePoint configuration database C. To recover the SharePoint web application:1. Start NMM recovery session from the SQL server2. Recover content database and C:\inetpub D. To recover the SharePoint web application:1. Start NMM recovery session from the web front-end server2. Recover content database and SYSTEM COMPONENTS

: QUESTION 16 An EMC NetWorker customer is evaluating NMSQL. They need to be able to perform filegroup level restores. Which type of restore operation achieves this required recovery? A. Piecemeal B. Tail-log C. Copy D. Normal : QUESTION 17 An EMC customer has a large Microsoft SharePoint 2010 environment. The environment consists of three separate distributed farms with several web front-end and content database servers. An Avamar solution was deployed to protect this environment, backing up the SharePoint data to Data Domain Boost devices on the back-end. Backup data is replicated by Avamar to a disaster recovery site in another location. The web front-end server in one of the farms where the front-end plug-in is installed experienced a disaster and all data on that server was lost. What needs to be done to ensure backups continue to run with minimal impact to operations? A. Recover the failed web front-end server and restart the backup operations B. Redirect new backup jobs to any surviving web front-end server C. Install the front-end plug-in on another server, then restart the backup D. Reconfigure the entire backup environment since the backup configuration was lost : QUESTION 18 A customer has EMC NetWorker integrated with Data Domain. They noticed that they have incorrectly configured their NetWorker Browse and Retention policies for all currently defined clients. This issue was discovered when a DPA report was e-mailed showing the amount of available space on their EMC Data Domain system. The customer has made the necessary corrections to the Browse and Retention policies. They have manually deleted save sets that should have been expired based upon the new Browse and Retention times. After comparing the size of the index directory, prior to and after the modification, the customer noticed that the index directory decreased in size by several hundred GB. However, the available space on the Data Domain remained unchanged. Although NetWorker has deleted the necessary indexes, why does the Data Domain available capacity remain the same? A. Data Domain clean process was not run B. Data Domain retention lock is active C. NetWorker clean process was not run D. NetWorker Data Domain device has automatic retention set

: QUESTION 19 An EMC customer wants to backup their NAS device. The NAS device does not support token-based backups. When creating an NDMP backup schedule in EMC NetWorker, which backup levels are supported? A. Full and differentials 1-9 B. Full and incremental C. Full D. Full, incremental, and differentials 1-9 : QUESTION 20 An EMC Avamar customer wants to determine when the Samba credentials get passed during an Avamar 6.0 file-level restore. At which point are the credentials passed? A. After the CIFS share is exported from Avamar B. After the CIFS share is mounted C. Before the AvFS is enabled to browse files within Avamar D. After the proxy starts the browse and restore operations : QUESTION 21 You have been assigned to resolve a customer's EMC VNX file-level backup design issue. They are using EMC NetWorker with Data Domain as a LAN backup device. The IT infrastructure consists of LAN and SAN components. Which solution provides the least amount of traffic over the production LAN and SAN? A. Local backup with an NDMP tape server directly attached to a Data Domain VTL B. Local backup to the same VNX, then migrate it to a physically attached library C. Three-way backup to the Data Domain with a dedicated storage node D. Copy the data to the SAN segment, then backup to the Data Domain :

QUESTION 22 An existing EMC NetWorker customer has already integrated an EMC Avamar server with NetWorker. They have tried to backup their clients to the deduplication node. However, a message occurs stating that the backup session is waiting for a writable volume. What is the possible cause for this message? A. Dedicated AFTD was not created B. Client license is not installed C. Base Enabler has expired D. Avamar maintenance window is currently running : QUESTION 23 An EMC NetWorker customer has asked you to design a Microsoft SharePoint backup solution using NMM. The SharePoint environment is configured as a distributed farm consisting of two web front-end servers, three SQL database servers, and two query servers. Which tasks need to be performed to backup the SharePoint distributed farm? A. Install NMM software on all serversregister SharePoint Services Writer on both web front-end serversassign all servers to one NetWorker Group B. Install NMM software on the SQL database servers onlyregister SharePoint Services Writer on all SQL database serversassign all SQL database servers to one NetWorker Group C. Install NMM software on both web front-end serversregister SharePoint Services Writer on all both web front-end serversassign both web front-end servers to one NetWorker Group D. Install NMM software on all serversregister SharePoint Services Writer on one web front-end serverassign all servers to one NetWorker Group : QUESTION 24 An EMC NetWorker customer has added a NetWorker deduplication node to their existing NetWorker environment. They have set up offsite cloning of all metadata. In addition, they have setup replication to an offsite Avamar at their disaster recovery site. The customer would like a review to assist in setting up the most efficient use of their existing storage. Which steps are needed? A. Review client change rates, retention periods, and data types B. Review all client logs and schedules C. Review all error messages in NetWorker to see the clients' status D. Review and reduce the amount of full backups occurring :

QUESTION 25 A customer is using an EMC NetWorker server and NMSQL on all SQL servers. They would like to use Data Domain as a backup device for the databases and special dump logs. What is the recommended way to integrate Data Domain in the SQL backup environment? A. DD Boost for the databases and CIFS share for the special dump logs B. DD Boost for the databases and the special dump logs C. CIFS share for the databases and the special dump logs D. CIFS share for the databases and DD Boost for the special dump logs : QUESTION 26 An EMC customer is currently using NetWorker, Data Domain configured as an NDMP tape server, and VNX. The Data Domain and the VNX both have supported HBAs. The customer configured the NDMP backup in NetWorker and has noticed that the data is not traversing over the HBA cards. Rather, the data is being set over the LAN. Why is the backup data being backed up over the LAN directly to the Data Domain system? A. VTL does not require a Fibre Channel HBA B. DD VTL license is not installed and enabled C. LAN speed is faster than the SAN speed D. SAN zone is not properly configured : QUESTION 27 An EMC customer is building a backup and recovery solution for their Microsoft SharePoint environment. The solution being considered involves using Avamar to back up a SharePoint distributed farm. The farm has two web front-end servers and three content databases. According to EMC best practices, how many front-end Avamar VSS plug-ins should be installed to support this environment? A. 1 B. 2 C. 3 D. 5 : QUESTION 28 A company just converted its physical server environment to a virtual environment using vsphere 5. They

have asked you to assist with creating a backup strategy for their virtual machines. The company wants to perform file level backups of their virtual machines without installing backup agents on them. Which vsphere feature will provide this capability? A. vstorage APIs for Data Protection B. VMware Consolidated Backup C. vstorage APIs for Array Integration D. VMware Storage Integrator : QUESTION 29 An EMC NetWorker customer is backing up several different applications to Data Domain devices in their production data center. They want to replicate their daily sensitive database backups to another Data Domain system located in their disaster recovery data center. Both data centers are linked with only a 10 Mb link. Based on EMC best practice, which type of replication should be used? A. Clone-controlled B. Directory C. Collection D. Archive : QUESTION 30 A customer has an EMC VNX Series NAS with seven million files on an NFS share and two million files on a CIFS share. The customer is looking for a way to protect their data against data loss. Which backup method is most cost effective and ensures that file attributes are protected during the backup? A. Deploy a NetWorker solution and backup the NAS to a Microsoft Windows storage node using NDMP. B. Mount the NAS shares onto a Solaris server and use dump to backup the data to a SCSI-attached tape device. C. Mount the NAS shares onto a Microsoft Windows 2008 server and use NT backup to backup the data to a SCSI-attached tape drive. D. Deploy a Microsoft Windows 2008 server to mount the NAS share on and copy the data to SAN storage. : QUESTION 31 A customer is implementing a new Oracle database server that will host critical financial data. Due to the

importance of this database, the customer has determined that a loss of any kind should be avoided. Which recommendation will significantly reduce the possibility for data loss? A. Database should always run in archive log mode B. Database should be put in archive log mode during backups C. Oracle system tablespace should be included in every backup D. Control file should be included in every backup : QUESTION 32 An EMC NetWorker customer is using NetWorker Module for Microsoft SQL to back up a large SQL database. They are storing the backup data on a NetWorker Data Domain device. Which path does the backup data follow to the Data Domain device? A. Client to NetWorker storage node to Data Domain B. Client to Data Domain C. Client to NetWorker server to NetWorker storage node to Data Domain D. Client to NetWorker server to Data Domain : QUESTION 33 A customer is using EMC Avamar to backup their Oracle databases. They have noticed that their incremental backup performance is not as fast as they would like. Due to this issue, they would like to begin using Block Change Tracking (BCT) to improve the performance. What must be done to enable this feature? A. Enable BCT through SQLplus in Oracle B. Enable BCT in RMAN on the database server C. Include the BCT options in the RMAN script D. Change the backup level to incremental backup level 1 : QUESTION 34 Click on the calculator icon in the upper left corner. You are designing a backup solution for a customer that uses both EMC NetWorker and Data Domain. The customer has stated that they would like to be able to maintain 120 simultaneous sessions to the Data Domain devices. If using NetWorker 7.6 SP2, what is the minimum number of Data Domain devices that should be

configured to meet the requirement? A. 2 B. 6 C. 10 D. 12 : QUESTION 35 You are designing a backup solution for an ESX environment using EMC Avamar 6.1. All guests are running either a Microsoft Windows server or Linux and their virtual disks reside on shared VMFS SAN storage. You want the ability to perform file level restores. However, you also want to limit the amount of backup clients deployed on guest operating systems. Which deployment method will provide the ability to use image-based backups and file-level restores? A. Avamar proxy for image backupsfile-level restores for both Linux and Windows guests B. Avamar client agents for backup and file-level restores for both Windows and Linux C. Avamar proxy for image backups for both operating systemsavamar client agents for Linux file- level restore D. Avamar proxy for image backups for both operating systemsavamar client agents for Windows filelevel restore : QUESTION 36 A new EMC Avamar customer would like to configure backups of a single SQL instance running on a twonode Microsoft SQL cluster. To enable backups of the SQL database, what is the order of installation for the client software? A. Install the Avamar Windows client and Avamar SQL client on both nodes in the cluster.configure the Avamar Cluster Client on the active node in the cluster. B. Install the Avamar Windows client and Avamar SQL client on both nodes in the cluster.create AvamarBackupUser and configure the Avamar Cluster Client on both nodes in the cluster. C. Install Avamar Windows client on both nodes.install the Avamar SQL client on the active node in the cluster. D. Install the Avamar Windows client and Avamar SQL client on both nodes in the cluster.configure the Avamar Cluster Client on both nodes in the cluster. : QUESTION 37 A customer has a large backup environment using EMC NetWorker integrated with Data Domain. They have a requirement to backup their hosts every night. They start all of their host backups at the same time. Each night during backups, their network utilization is high and the backups take a long time.

What is a recommendation to reduce the network utilization and backup time while minimizing cost? A. Separate the hosts into groups and stagger the groups to run one hour apart B. Separate the hosts into groups and run half of the groups during the day C. Add more storage nodes to increase the amount of backups that can run D. Add more storage nodes and run the backups on alternating nights : QUESTION 38 You are designing a MS SQL disaster recovery solution for a customer who is using EMC NetWorker and NMM. The SQL environment includes MS SQL 2005 and MS SQL 2008. To ensure the snapshots made by NMM can be used for disaster recovery, how should the backup be configured? A. At least one rollover to a conventional backup media for all volumes and system components B. At least one persistent snapshot for all volumes and system components C. Point-in-time copy for MS SQL databases on the primary storage subsystem D. Point-in-time copy for all volumes on the storage subsystem : QUESTION 39 An EMC Avamar customer has two remote sites; each site has an EMC Celerra. The local data center has an EMC VNX. The remote sites are on a different VLAN than the local data center. Based on EMC best practice, how many NDMP Accelerator Nodes should be used and where should they be placed? A. 1 - Only in the local data center B. 2 - One per VLAN located in the local data center C. 3 - One at each remote office and one at the local data center D. 3 - On the same VLAN as the Avamar server Correct Answer: C : QUESTION 40 A customer has an EMC VNX series NAS with a total of 20 TB of user data. The customer wants to use EMC NetWorker to backup the VNX to a Data Domain VTL. The VTL is configured with four tape drives that are zoned to the backup server. What is the minimum number of pools required to have a successful NDMP backup?

A. 1 B. 2 C. 3 D. 4 : QUESTION 41 An Oracle customer would like to perform a restore of several datafiles that have become corrupted. They have verified that the data needed for recovery is available and have identified the necessary media. What needs to happen before they can restore the datafiles to their current location? A. Database must be started with the datafiles to be restored offline B. Database must be started with the datafiles to be restored online C. Database must be shutdown with the datafiles to be restored online D. Database must be shutdown with the datafiles to be restored offline to the point answer. QUESTION 42 You are meeting with a customer to discuss pre-requisites for an EMC NetWorker design using an Avamar deduplication node. Which types of media pools are required? A. Backup and metadata B. File system and database C. Windows and Linux operating systems D. Full and incremental : QUESTION 43 An EMC NetWorker customer has asked you to deploy a Microsoft Exchange 2010 backup solution using NMM. They want single mailbox recovery capability. What needs to be performed? A. Install the Microsoft Messaging API and Collaboration Data Objects kit B. Enable IPv6 on the Exchange server and enable Kernel Mode Authentication C. Take the Exchange database offline first and create a new RDB D. Create a new RDB and select the database overwrite option

exact answer. QUESTION 44 An EMC Avamar customer has purchased two Data Domain (DD) systems for their remote site. They want to replicate their large SQL database backups to both Data Domain systems at the remote site. What must be done to have a successful replication? A. Replicate first to one DD before mapping to the second DD system B. Replicate the clients that are needed for the DD and setup both DD systems to replicate C. Setup the replication mapping with both source and target, and select the root level for the domains to be replicated D. Setup a new replicate domain for the client and map the client to the second DD system real answer. QUESTION 45 A customer is using EMC NetWorker with a tape library to perform full backups at the end of the month and daily incrementals. The restore process takes a long time as tapes must unload and reload. The customer needs to achieve a faster recovery. What will help achieve the right RTO? A. Dedicated backup LAN B. Virtual tape library C. Faster tape drive D. Faster backup server hardware Correct Answer: D : QUESTION 46 A customer has an EMC VNX series NAS with total of 20 TB of user data. The customer wants to use EMC NetWorker to backup the VNX to a Data Domain VTL. The VTL is configured with four tape drives. Two drives are zoned to the backup server and two drives are zoned to the VNX. What is the minimum number of pools required to have a successful NDMP backup? A. 1 B. 2 C. 3 D. 4 Correct Answer: B right.

QUESTION 47 An existing EMC NetWorker customer has recently purchased Avamar to be installed as a deduplication node. The Avamar installation was completed and can be fully managed from MCS with no errors reported. From the NetWorker management GUI, the deduplication node failed to be discovered. Which component is missing? A. NetWorker Linux client B. NetWorker License Manager C. NetWorker storage node D. NetWorker Solaris client : QUESTION 48 A customer has asked you to design a Microsoft Exchange backup solution. The Exchange environment includes both Exchange Server 2007 and 2010. EMC NetWorker Module for Microsoft is proposed. What is required to use NMM for Exchange backups? A. Instant backup with rollover B. Instant backup without rollover C. Backup snapshots set to 'None' D. Streaming backups Best answer. QUESTION 49 You are planning a MS SQL striped backup solution for a customer using a dedicated EMC NetWorker server and NMSQL. To achieve higher backup performance for a large amount of databases, what is the minimum value of the NetWorker server parallelism attribute? A. At least one number larger than the number of stripes being used B. At least the same number of stripes being used C. At least twice the number of stripes being used D. At least the same number of databases being backed up : QUESTION 50 A customer wants to perform incremental backups of the local VNX using EMC Avamar. Based on EMC best practice, at which granularity should the backup of this NAS device be performed? A. Volume

B. File C. Sub-volume D. Directory : QUESTION 51 Which EMC Avamar feature provides the benefit of less network traffic than traditional backup applications? A. Target-based deduplication B. Source-based deduplication C. Inline deduplication D. Post-process deduplication : QUESTION 52 A customer wants to configure an EMC NetWorker (NW) client for optimal backup performance to a NetWorker deduplication node. In a NW client's parallelism configuration setting, what is the maximum recommended value? A. 1 B. 2 C. 4 D. 8 Correct Answer: C : QUESTION 53 An EMC Avamar 5.x customer is currently backing up over 200 virtual machines and several small SQL databases. All clients have less than 50 GB of data. They want to purchase a Data Domain solution for the larger 8 TB Oracle databases and still maintain use of Avamar MCS. What must be done before integrating Data Domain (DD) with Avamar? A. Upgrade to Avamar 6.0 or later B. Add the SSL certificate on Avamar for the DD device C. Create an Mtree to reflect the dpnid D. Install DD Boost on the Avamar server

agreed with the answer. QUESTION 54 You have been tasked with designing a backup solution using EMC NetWorker to backup a VMware environment. The environment will be using virtual NetWorker proxies to perform image-based backups. You will need to backup 36 virtual disks at a time in order to meet the backup window. The ESX hosts used in this environment are high-end and have a lot of processing power. What is the recommended way to configure NetWorker proxies to meet this design? A. Create three NetWorker proxies on one ESX server B. Create six NetWorker proxies on one ESX server C. Create two NetWorker proxies on two ESX servers D. Create one NetWorker proxy on one ESX server : QUESTION 55 A client has a large ESX environment that they backup using EMC NetWorker. Their virtual machines are a mix of database and non-database servers. They currently perform guest-based backups so that their database server backups are application consistent. They have asked you to address some performance issues they have been encountering. Specifically, network utilization is high during backups. They would like you to provide a recommendation to reduce network traffic without adding additional cost while retaining application consistency. What is a recommended solution that addresses the customer's issues? A. Switch the non-database servers to image-based backups and leave the database servers as is B. Switch all guest backups to image-based backups to reduce backup traffic from the network C. Provide additional bandwidth to the environment by installing additional network equipment D. Provide additional bandwidth to the environment by replacing slower equipment with faster equipment : QUESTION 56 Click on the calculator icon in the upper left corner. An EMC customer has been experiencing an Avamar performance issue on a Microsoft Windows client. Technical Support has recommended that the maximum amount of file cache and hash cache be increased from 512 MB to 896 MB and 256 MB to 448 MB respectively. How much memory is needed to support the increase in cache size? A. 3 GB B. 5 GB C. 7 GB D. 9 GB

: QUESTION 57 An existing EMC Avamar customer would like to configure their Oracle servers to their Avamar backup environment. The environment consists of two standalone Oracle servers and one two-node RAC configuration. In addition to installing the file system client on each node, what must be done to complete the configuration? A. rac_config must be run on each node B. rac_config must be run on one node in the cluster C. Both cluster nodes must be registered with the Avamar server D. Install the Avamar Oracle client on only one node in the cluster : QUESTION 58 An EMC NetWorker customer has asked you to deploy a Microsoft Exchange 2007 backup solution using NMM. They want single mailbox recovery capability. What needs to be performed? A. Ensure the RSG system path and the RSG log path of the Exchange server are the same. B. Enable IPv6 on the Exchange server and disable Windows authentication. C. Ensure the RSG exists and take the Exchange database offline before the recovery operation. D. Ensure the RSG exists and add Receive-As Exchange extended rights to the NMM user. : QUESTION 59 A customer has configured their existing EMC NetWorker 7.6.1 to use a Data Domain device type. A single DD Boost device has been configured to backup two local clients. The target sessions and max sessions has been set to 6 and 10 respectively. The customer will be adding two additional clients. They want to increase the target sessions to 12 and max sessions to 15 for the configured DD Boost device. In order to meet the customer's objective, what must be done? A. Upgrade the NetWorker server software B. Modify the target sessions and max sessions C. Upgrade the Data Domain memory D. Add another DD Boost device

: QUESTION 60 An EMC NetWorker customer wants to replicate backup data stored on their Data Domain system to a new, offsite Data Domain system. They want the benefits of replicating data in deduplicated format. However, they also want to be able to manage and report on the replicated save sets using NetWorker media database information. To meet their requirements, which method of storing backup data on the Data Domain system and which type of replication should be used? A. DD Boost for the backup data and clone-controlled replication B. AFTD for the backup data and clone-controlled replication C. DD Boost for the backup data and regular clone operation D. AFTD for the backup data and regular clone operation : QUESTION 61 A Symantec NetBackup customer is planning to add a second data center. They would like to leverage deduplication technology to improve backup operations and disaster recovery with a minimum amount of change to their existing backup environment. The customer's primary design goals are: 1. Improve backup performance 2. Electronic vaulting for disaster recovery 3. Maintain NetBackup as their primary tool for backup control and visibility http://www.gratisexam.com/ What should be included with a high-end Data Domain appliance? A. NetBackup OST B. 8 GB Fibre Channel C. iscsi over 10 GB Ethernet D. CIFS protocol over 10 GB Ethernet Correct Answer: D : QUESTION 62 Which environment will yield the optimal data deduplication for backup purposes? A. Virtualized environment where O/S images are stored in a SAN environment and backed up and retained for 3-6 months B. Database environment where large transaction logs are backed up on a daily basis and stored for one

month C. An advertising organization where multimedia files are backed up and stored indefinitely D. Hospital environment where compliance requires patient information (CAT scans, MRI, x-rays) to be backed up, stored, and accessible for up to 10 years Correct Answer: C : QUESTION 63 A customer is using EMC Avamar as a backup solution for MS SQL servers with different point-in- time backups. The SLA prevents recovery back to the original database. What is the recovery requirement when the SQL instance has the same name? A. New database name in a new file path location for the database and logs B. Same database name in the same file path location for the database and logs C. New database name in the same file path location for the database and logs D. Same database name in a new file path location for the database and logs : QUESTION 64 You need to edit/change the mcserver.xml file in the Avamar configuration procedure for use as a deduplication node in EMC NetWorker. What is the reason for making the change? A. Allow multiple sessions from the client B. Allow multiple deduplication nodes for the client C. Keep client retention properties in place D. Keep session timeout variable in place : QUESTION 65 A large Oracle customer has been performing backups of their databases to NFS mounts presented from their EMC Data Domain system. In addition, they have directory replication configured to replicate data from the primary Data Domain to a system at their alternate data center. They are now interested in testing DD Boost for Oracle RMAN to backup the databases. What is required to enable this configuration? A. Install the RMAN plug-in on each database server and license both Data Domain systems for DD Boost B. Install the RMAN plug-in on the server hosting the RMAN catalog and license both Data Domain systems for DD Boost C. Install the RMAN plug-in on each database server and license the primary Data Domain system for DD Boost D. Install the RMAN plug-in on the server hosting the RMAN catalog and license the primary Data Domain

system for DD Boost : QUESTION 66 A customer is using EMC Avamar as a backup solution for MS SQL servers with different point-in- time backups. Management requires a reliable way to restore the database to a specific point in time. Which type of restore meets this requirement? A. Standard direct restore with a tail-log backup B. Full direct restore with a tail-log backup C. Standard direct restore with a full-log backup D. Full direct restore with a full-log backup : QUESTION 67 You are designing a backup solution for a large VMware environment. You are planning to use snapshot technology to backup the virtual machines but management has expressed concerns over how long the snapshots will take to create. What is a way to reduce the time it takes to create a snapshot? A. Schedule the backups to occur when there is little I/O on the virtual machine datastore B. Make sure at least 20% free space exists on the datastore where the virtual machine resides C. Use Raw Device Mappings to ensure the backup server is able to have direct access D. Ensure snapshots are taken of all datastores the virtual machine is using for virtual disks : QUESTION 68 Scenario 6 A customer recently implemented an EMC Avamar solution in their primary data center. The environment consists of several Microsoft applications, including Microsoft SharePoint, Exchange, and SQL. An EMC Data Domain system was also deployed behind Avamar as the backup destination for these applications. There are also several file system clients that have been configured to back up directly to the Avamar server. One Avamar server and two Data Domain systems have been deployed to support this configuration. The Avamar server is operating close to full capacity and there is no room for expansion since it is already fully provisioned with the maximum number of nodes. The Data Domain systems have plenty of capacity left; each system is currently at 35% of utilization. Refer to Scenario 6. The customer now wants to replicate all backup data to a secondary site for disaster recovery reasons. At a

minimum, how many systems need to be deployed at the secondary site to satisfy this request? A. One Avamar server and one Data Domain system B. One Avamar server and two Data Domain systems C. Two Avamar servers D. Two Data Domain systems : QUESTION 69 Scenario 1 You have a customer with a large IBM Lotus Domino environment. The customer is in the process of migrating from a UNIX to a Microsoft Windows infrastructure. As part of this process, they are going to perform a refresh of the hardware and software that Domino is running on. In addition, they will migrate all client backups to a new EMC NetWorker environment. The new backup environment consists of a NetWorker server and two storage nodes running on Windows 2008. The Domino environment consists of a single server running two instances of Domino. The total amount of data that needs to be backed up is approximately 900 GB. The Domino server will have connections to both the SAN and the LAN. They would like to perform hot backups of the databases using the NMDA but are leaving specific design decisions to you. Additionally, the customer would like to send all data to disk for onsite backups and clone the first full backup of the year to tape for long-term offsite retention. The backup target infrastructure consists of a single Quantum i2000 tape library with six LTO-4 tape drives in addition to two EMC Data Domain 890s. One Data Domain will be located at their primary site. The second Data Domain is at the disaster recovery (DR) site as a replication target for the first. One of the customer's major concerns is the backup speed of the Domino environment. They are interested in any best practices they can implement to improve backup performance at the Domino level. Furthermore, they are looking for guidance in using NMDA to backup the data and leverage their backup infrastructure in the most efficient way. Refer to Scenario 1. To achieve optimal backup performance, which recommendation would you make regarding the disk layout of their Domino server? A. Install the operating system, Domino data, and the transaction logs on separate drives B. Install the operating system on the C:\ drive and Lotus Domino on the D:\ drive C. Install Lotus Domino on the C:\ drive with the operating system but keep the transaction logs on the D:\ drive D. Install the operating system, Domino data, and the transaction logs on the same fast SAN disk : QUESTION 70 Refer to the Exhibit.

A customer is currently using an EMC NetWorker server and NMM 2.3 to backup all their SQL servers. They have a business requirement to comply with SLA standards, to expand the recovery capabilities, and be more flexible and faster in recovery. How would this requirement be accomplished? A. Replace NMM 2.3 with NMSQL B. Use the NMM 2.3 advanced recovery option C. Install Kroll OnTrack tool to support granular recovery D. Migrate from NetWorker to Avamar : QUESTION 71 Scenario 2 An EMC NetWorker customer wants to add their Microsoft Exchange 2007 servers to their backup environment. The databases are stored on SAN volumes. There are three mailbox servers, each hosting 10 storage groups. Refer to Scenario 2. What is the recommended method for restoring items from an individual mailbox? A. Recovery Storage Group B. Database Availability Group C. Recovery Database D. Exchange Management Console

: QUESTION 72 Scenario 1 You have a customer with a large IBM Lotus Domino environment. The customer is in the process of migrating from a UNIX to a Microsoft Windows infrastructure. As part of this process, they are going to perform a refresh of the hardware and software that Domino is running on. In addition, they will migrate all client backups to a new EMC NetWorker environment. The new backup environment consists of a NetWorker server and two storage nodes running on Windows 2008. The Domino environment consists of a single server running two instances of Domino. The total amount of data that needs to be backed up is approximately 900 GB. The Domino server will have connections to both the SAN and the LAN. They would like to perform hot backups of the databases using the NMDA but are leaving specific design decisions to you. Additionally, the customer would like to send all data to disk for onsite backups and clone the first full backup of the year to tape for long-term offsite retention. The backup target infrastructure consists of a single Quantum i2000 tape library with six LTO-4 tape drives in addition to two EMC Data Domain 890s. One Data Domain will be located at their primary site. The second Data Domain is at the disaster recovery (DR) site as a replication target for the first. One of the customer's major concerns is the backup speed of the Domino environment. They are interested in any best practices they can implement to improve backup performance at the Domino level. Furthermore, they are looking for guidance in using NMDA to backup the data and leverage their backup infrastructure in the most efficient way. Refer to Scenario 1. The customer has configured the Domino servers and would like to perform a full backup. By default, which data will be included in a full backup? A. All database objects B. All database objects and transaction logs C. All Lotus Domino documents and transaction logs D. All files in the Lotus Domino DAOS directory : QUESTION 73 Scenario 1 You have a customer with a large IBM Lotus Domino environment. The customer is in the process of migrating from a UNIX to a Microsoft Windows infrastructure. As part of this process, they are going to perform a refresh of the hardware and software that Domino is running on. In addition, they will migrate all client backups to a new EMC NetWorker environment. The new backup environment consists of a NetWorker server and two storage nodes running on Windows 2008. The Domino environment consists of a single server running two instances of Domino. The total amount of data that needs to be backed up is approximately 900 GB. The Domino server will have connections to both the SAN and the LAN. They would like to perform hot backups of the databases using the NMDA but are leaving specific design decisions to you. Additionally, the customer would like to send all data to disk for onsite backups and clone the first full backup of the year to tape for long-term offsite retention. The backup target infrastructure consists of a

single Quantum i2000 tape library with six LTO-4 tape drives in addition to two EMC Data Domain 890s. One Data Domain will be located at their primary site. The second Data Domain is at the disaster recovery (DR) site as a replication target for the first. One of the customer's major concerns is the backup speed of the Domino environment. They are interested in any best practices they can implement to improve backup performance at the Domino level. Furthermore, they are looking for guidance in using NMDA to backup the data and leverage their backup infrastructure in the most efficient way. Refer to Scenario 1. Which additional piece of information must be specified on the command line when using nsrdasv to manually perform backups of the Domino instances? A. Path to the NMDA Lotus configuration file B. Name of the Domino instance to be backed up C. Level at which the backup should be performed D. Path to the Domino installation files : QUESTION 74 Scenario 1 You have a customer with a large IBM Lotus Domino environment. The customer is in the process of migrating from a UNIX to a Microsoft Windows infrastructure. As part of this process, they are going to perform a refresh of the hardware and software that Domino is running on. In addition, they will migrate all client backups to a new EMC NetWorker environment. The new backup environment consists of a NetWorker server and two storage nodes running on Windows 2008. The Domino environment consists of a single server running two instances of Domino. The total amount of data that needs to be backed up is approximately 900 GB. The Domino server will have connections to both the SAN and the LAN. They would like to perform hot backups of the databases using the NMDA but are leaving specific design decisions to you. Additionally, the customer would like to send all data to disk for onsite backups and clone the first full backup of the year to tape for long-term offsite retention. The backup target infrastructure consists of a single Quantum i2000 tape library with six LTO-4 tape drives in addition to two EMC Data Domain 890s. One Data Domain will be located at their primary site. The second Data Domain is at the disaster recovery (DR) site as a replication target for the first. One of the customer's major concerns is the backup speed of the Domino environment. They are interested in any best practices they can implement to improve backup performance at the Domino level. Furthermore, they are looking for guidance in using NMDA to backup the data and leverage their backup infrastructure in the most efficient way. Refer to Scenario 1. Following a full backup of both Domino instances on the server, at which level of granularity can data be recovered from this backup? A. Database, document, and DAOS B. Database and document only C. Database and DAOS only D. Database, transaction logs, and DAOS

QUESTION 75 An EMC NetWorker customer wants to add their new Microsoft SharePoint distributed farm to their backup environment. The farm contains three servers. One server contains the web front-end and the other two servers each contain two SQL databases. How is the number of the client resources determined? A. One resource for each server in the farm B. One resource for each SQL database in the farm and one for the web front-end server C. Only one resource for the entire farm D. One resource for each SQL database in the farm : QUESTION 76 A customer is planning to use EMC NetWorker integrated with Data Domain to backup their enterprise. Data Domain will be used to replicate backups to an offsite location to satisfy regulatory requirements. The customer is concerned about the difficulty in managing their backups and backup clones with two interfaces. What could be done to simplify the management of backups and clones? A. Configure DD Boost with NetWorker and use clone-controlled replication. B. Configure pre and post scripts to handle the cloning. C. Create one backup job for cloning and one additional job for local copies. D. Create scripts to run through the CLI to handle daily cloning. : QUESTION 77 While installing an EMC Avamar deduplication node in a NetWorker backup solution, the Microsoft Windows client backup jobs fail to run. Which process should be running on the client during the backup? A. nsravtar B. nsravamar C. nsrim D. nsrndmpsv : QUESTION 78 A customer recently integrated EMC Avamar into their existing NetWorker datazone. After creating a deduplication client and defining the NetWorker deduplication node, the backup is started. However, the backup failed.

What must be done to perform a successful backup? A. Create a local AFTD on the storage node to store deduplication metadata B. Create an AFTD on the Avamar server to store deduplication metadata C. Create an AFTD to store the deduplication indexes D. Create an AFTD to store the additional bootstrap information : QUESTION 79 You are planning an MS SQL backup solution for a customer using EMC NetWorker and NMM without a proxy client. Which user privilege must be configured on NetWorker? A. Add the NMM client to the NetWorker Administrator user group B. Add the NetWorker Administrator to the NMM remote user setting C. Add the NMM client to the MS Windows administrators user group D. Add the NMM client to the Operators user group : QUESTION 80 An EMC customer is currently backing up their Microsoft Exchange database to an EMC Avamar server. The backups are setup to full on Friday, skip on Sunday, and only transaction logs backed up the rest of the week. The customer would like to integrate Data Domain to Avamar and run the database backups to the Data Domain system. If a Data Domain system is deployed on Sunday, which type of backup runs on the following Monday? A. Full database backup B. Transaction logs backup C. Backups will be skipped D. Level 1 backup of the database : QUESTION 81 A customer has implemented EMC Data Domain Boost for Oracle RMAN software in their environment and are successfully backing up several Oracle servers. Backups are directed to a local Data Domain system and a second Data Domain system was configured at their disaster recovery site as a target for replication. What needs to be done to create copies of the backup data on the remote system that are tracked and recoverable by RMAN? A. Modify the RMAN script to include backup copies

B. Configure directory replication between the Data Domain systems C. Configure Mtree replication between the Data Domain systems D. Create a second RMAN script for the second Data Domain system : QUESTION 82 Refer to the Exhibit. A customer has asked you to deploy a Microsoft Exchange backup solution. The customer's environment consists of the following: Which Application Information attributes need to be set for a successful Data Domain Boost backup? A. NSR_DIRECT_ACCESS=YesNSR_DEVICE_INTERFACE=DATA_DOMAIN B. NSR_DIRECT_ACCESS=YesNSR_DEVICE_INTERFACE=Boost C. NSR_DATA_MOVER=DATA_DOMAINNSR_SNAP_TYPE=DATA_DOMAIN D. NSR_DATA_MOVER=DATA_DOMAINNSR_SNAP_TYPE=Boost : QUESTION 83 Scenario 6 A customer recently implemented an EMC Avamar solution in their primary data center. The environment consists of several Microsoft applications, including Microsoft SharePoint, Exchange, and SQL. An EMC Data Domain system was also deployed behind Avamar as the backup destination for these applications. There are also several file system clients that have been configured to back up directly to the Avamar server.

One Avamar server and two Data Domain systems have been deployed to support this configuration. The Avamar server is operating close to full capacity and there is no room for expansion since it is already fully provisioned with the maximum number of nodes. The Data Domain systems have plenty of capacity left; each system is currently at 35% of utilization. Refer to Scenario 6. The customer needs to protect a number of new file system clients. How can this be accomplished? A. Deploy a second Avamar server and configure the new clients on the new server B. Direct their backup data to the Data Domain systems C. Change the compression algorithm from lz to gz, freeing up space for the new clients D. Increase the garbage collection frequency on the Avamar server : QUESTION 84 Refer to the Exhibit. A customer has asked you to deploy a Microsoft Exchange backup solution. The customer's environment consists of the following: Which tasks need to be performed for a successful Data Domain Boost backup? A. Set the NSR_DIRECT_ACCESS=YesSet the NSR_DEVICE_INTERFACE=DATA_DOMAIN B. Set the NSR_DEVICE_INTERFACE=DATA_DOMAINSelect the Data Domain backup attribute C. Set the NSR_DIRECT_ACCESS=YesSelect the Data Domain backup attributeinstall the NetWorker storage node software on the Exchange server D. Set the NSR_DIRECT_ACCESS=YesCreate and configure the Data Domain device on the Exchange server

: QUESTION 85 Scenario 6 A customer recently implemented an EMC Avamar solution in their primary data center. The environment consists of several Microsoft applications, including Microsoft SharePoint, Exchange, and SQL. An EMC Data Domain system was also deployed behind Avamar as the backup destination for these applications. There are also several file system clients that have been configured to back up directly to the Avamar server. One Avamar server and two Data Domain systems have been deployed to support this configuration. The Avamar server is operating close to full capacity and there is no room for expansion since it is already fully provisioned with the maximum number of nodes. The Data Domain systems have plenty of capacity left; each system is currently at 35% of utilization. Refer to Scenario 6. After configuring replication for this environment, the source Data Domain system crashed. What happens when a new backup job is started? A. Backup fails after the timeout period elapses B. Data is automatically sent to the target Data Domain system C. Avamar server caches the data until the source Data Domain system is fixed D. Backup immediately fails : QUESTION 86 A customer has an EMC Data Domain appliance that has reached 90% of maximum capacity. The customer does not want to purchase any additional storage. What will increase the average available capacity of the Data Domain appliance? A. Decrease the backup retention period B. Decrease the cleaning frequency C. Increase the snapshot expiration period D. Increase the number of streams Correct Answer: B : QUESTION 87 An EMC NetWorker customer has just started running backups of their new Microsoft SharePoint distributed farm. They are concerned that their web applications are not being backed up. What can you tell the customer about backing up web applications? A. Web applications are backed up with the corresponding content database B. Add the web application name to the save set field for the client hosting the content database

C. Create a separate client resource for each web application D. Web applications must be backed up with a file system backup method : QUESTION 88 An existing EMC Data Domain customer wants to know the way to integrate Data Domain with RMAN to their tape library. How would this integration take place? A. Use RMAN and Media Manager Layer to backup the application B. Use RMAN with NFS to write to tape C. Use RMAN with DD Boost to move data to the tape library D. Use RMAN with dnfs to write to the tape library : QUESTION 89 An EMC NetWorker customer has an 8 TB Oracle database. They want to know the most efficient way to backup with NetWorker to Data Domain deduplication. When integrating NetWorker with Data Domain, what is an Oracle best practice? A. Limit the number of streams per channel to one B. Limit the number of incremental backups C. Use at least eight concurrent backups sessions D. Use encryption and compression : QUESTION 90 An EMC Avamar customer is using Avamar SQL Server Client to back up their numerous MS SQL databases. They want to always make full backups for new databases and non-full backups for existing ones. What are the recommended backup options to achieve this task? A. Force Full and Force Incremental B. Force Full and Force Differential C. Full and Incremental D. Full and Differential

: QUESTION 91 Refer to the Exhibit. A customer has asked you to deploy a Microsoft Exchange backup solution. The customer's environment consists of the following: The customer wants to keep the point-in-time copy on disk and store another backup on the Data Domain device. Which configuration setting must be added and/or changed? A. NSR_EXCH_RETAIN_SNAPSHOTS B. Backup Snapshots C. Client Retries D. NSR_EXCH2010_BACKUP : QUESTION 92 An EMC NetWorker customer has asked you to deploy a Microsoft Exchange 2010 backup solution using NMM. They have two Microsoft Exchange 2010 servers in a Database Availability group (exch2010a and exch2010b). The client resource for 'exch2010a' is shown in the exhibit.

Which Exchange databases are backed up? A. MDB01, MDB02, MDB03, MDB04, and MDB05 B. MDB01, MDB02, MDB03, MDB04, and MDB06 C. MDB01, MDB02, MDB05, and MDB06 D. MDB03, MDB04, MDB05, and MDB06 : QUESTION 93 Scenario 6 A customer recently implemented an EMC Avamar solution in their primary data center. The environment consists of several Microsoft applications, including Microsoft SharePoint, Exchange, and SQL. An EMC Data Domain system was also deployed behind Avamar as the backup destination for these applications. There are also several file system clients that have been configured to back up directly to the Avamar server. One Avamar server and two Data Domain systems have been deployed to support this configuration. The Avamar server is operating close to full capacity and there is no room for expansion since it is already fully provisioned with the maximum number of nodes. The Data Domain systems have plenty of capacity left; each system is currently at 35% of utilization. Refer to Scenario 6. The customer noticed that while backing up the Microsoft Exchange clients, a significant amount of data is being stored on the Avamar server. The Exchange clients are configured to send their data to the Data

Domain system. What is an explanation for this behavior? A. Exchange log files are always stored on the Avamar server B. Data Domain system has run out of capacity and backup data is being redirected to the Avamar server C. Avamar server is caching the backup data and then sending it to Data Domain system D. Data is being reconstructed on the Avamar server so that it can be replicated : QUESTION 94 Scenario 1 You have a customer with a large IBM Lotus Domino environment. The customer is in the process of migrating from a UNIX to a Microsoft Windows infrastructure. As part of this process, they are going to perform a refresh of the hardware and software that Domino is running on. In addition, they will migrate all client backups to a new EMC NetWorker environment. The new backup environment consists of a NetWorker server and two storage nodes running on Windows 2008. The Domino environment consists of a single server running two instances of Domino. The total amount of data that needs to be backed up is approximately 900 GB. The Domino server will have connections to both the SAN and the LAN. They would like to perform hot backups of the databases using the NMDA but are leaving specific design decisions to you. Additionally, the customer would like to send all data to disk for onsite backups and clone the first full backup of the year to tape for long-term offsite retention. The backup target infrastructure consists of a single Quantum i2000 tape library with six LTO-4 tape drives in addition to two EMC Data Domain 890s. One Data Domain will be located at their primary site. The second Data Domain is at the disaster recovery (DR) site as a replication target for the first. One of the customer's major concerns is the backup speed of the Domino environment. They are interested in any best practices they can implement to improve backup performance at the Domino level. Furthermore, they are looking for guidance in using NMDA to backup the data and leverage their backup infrastructure in the most efficient way. Refer to Scenario 1. One of the customer's databases has become corrupted on one of their Domino instances. What is a requirement before an in-place recovery can be performed? A. Original database must be deleted first B. Original database must be brought online first C. Any missing NLO files must be restored first D. All transaction logs must be restored to \logdir first : QUESTION 95 You have been tasked with designing an EMC NetWorker backup solution for a customer with an ESX and IPv6 environment. The customer wants to take advantage of image-based backups of their virtual machines using VADP.

What should be considered when designing this environment? A. Use IPv4 instead of IPv6 B. Ensure each IPv6 host has a route to the backup server C. Use static IP addresses for each host using IPv6 D. Ensure the IPv6 hosts have proper DNS entries : QUESTION 96 An EMC NetWorker customer has asked you to deploy a Microsoft Exchange 2010 backup solution using NMM. They have two Microsoft Exchange 2010 servers in a Database Availability group (exch2010a and exch2010b). The client resource for 'exch2010a' is shown in the exhibit. Which Exchange databases are backed up? A. MDB01, MDB02, and MDB03 B. MDB01, MDB02, and MDB05 C. MDB01, MDB02, MDB05, and MDB06 D. MDB03, MDB04, and MDB06 Correct Answer: B

: QUESTION 97 An EMC NetWorker customer has a corporate requirement for secondary offsite backup to meet governmental regulations. What is the NetWorker disaster recovery best practice for client backups performed on a NetWorker deduplication node? A. Replicate the deduplication node data and clone the NetWorker metadata B. Create separate clone pools for deduplication nodes and the metadata device C. NetWorker clone script must be used for all deduplication backups D. NetWorker cannot clone the metadata : QUESTION 98 A customer noticed that they have incorrectly configured their NetWorker Browse and Retention policies for all currently defined clients. This issue was discovered when a DPA report was e-mailed showing the amount of available space on their EMC Data Domain system. The customer has made the necessary corrections to the Browse and Retention policies. They have manually deleted save sets that should have been expired based upon the new Browse and Retention times. After comparing the size of the index directory, prior to and after the modification, the customer noticed that the index directory decreased in size by several hundred GB. However, the available space on the Data Domain remained unchanged. Although NetWorker has deleted the necessary indexes, why does the Data Domain available capacity remain the same? A. Clients have deduplication references to the same data B. Data Domain retention lock is active C. NetWorker clean process was not run D. NetWorker Data Domain device has automatic retention set : QUESTION 99 You have been tasked with designing a backup solution using EMC NetWorker to backup a VMware environment. The environment will be using virtual NetWorker proxies to perform image-based backups. You will need to backup 36 virtual disks at a time in order to meet the backup window. The ESX hosts used in this environment are low-end and have a small amount of processing power. What is the recommended way to configure NetWorker proxies to meet this design? A. Create three NetWorker proxies on three ESX servers B. Create three NetWorker proxies on one ESX server C. Create six NetWorker proxies on one ESX server D. Create two NetWorker proxies on two ESX servers

: QUESTION 100 Scenario 1 You have a customer with a large IBM Lotus Domino environment. The customer is in the process of migrating from a UNIX to a Microsoft Windows infrastructure. As part of this process, they are going to perform a refresh of the hardware and software that Domino is running on. In addition, they will migrate all client backups to a new EMC NetWorker environment. The new backup environment consists of a NetWorker server and two storage nodes running on Windows 2008. The Domino environment consists of a single server running two instances of Domino. The total amount of data that needs to be backed up is approximately 900 GB. The Domino server will have connections to both the SAN and the LAN. They would like to perform hot backups of the databases using the NMDA but are leaving specific design decisions to you. Additionally, the customer would like to send all data to disk for onsite backups and clone the first full backup of the year to tape for long-term offsite retention. The backup target infrastructure consists of a single Quantum i2000 tape library with six LTO-4 tape drives in addition to two EMC Data Domain 890s. One Data Domain will be located at their primary site. The second Data Domain is at the disaster recovery (DR) site as a replication target for the first. One of the customer's major concerns is the backup speed of the Domino environment. They are interested in any best practices they can implement to improve backup performance at the Domino level. Furthermore, they are looking for guidance in using NMDA to backup the data and leverage their backup infrastructure in the most efficient way. Refer to Scenario 1. What must be done to ensure the transaction logs and any changed database files are backed up during an incremental backup of each database instance on the server? A. Domino transactional logging is enabled and set to Archived B. Backups should be using NetWorker differential levels 1-9 C. Domino transactional logging is enabled and set to Linear D. \Domino\data\logdir must be included in the saveset : QUESTION 101 EMC NetWorker is being proposed to a customer as a backup and recovery solution for a Microsoft SQL server. One of the customer's concerns is the ability to support database recovery at any requested time. Microsoft SQL Server Management Studio is used to display the properties of the user databases, as shown in the exhibit.

How can the customer's needs be achieved? A. Use NMSQL and set the recovery model property to Full B. Use NMDA and set the recovery model property to Full C. Use NMSQL and set the recovery model property to Simple D. Use NMDA and set the recovery model property to Simple : QUESTION 102 Scenario 6 A customer recently implemented an EMC Avamar solution in their primary data center. The environment consists of several Microsoft applications, including Microsoft SharePoint, Exchange, and SQL. An EMC

Data Domain system was also deployed behind Avamar as the backup destination for these applications. There are also several file system clients that have been configured to back up directly to the Avamar server. One Avamar server and two Data Domain systems have been deployed to support this configuration. The Avamar server is operating close to full capacity and there is no room for expansion since it is already fully provisioned with the maximum number of nodes. The Data Domain systems have plenty of capacity left; each system is currently at 35% of utilization. Refer to Scenario 6. The customer wants to replicate the Exchange backup data to one Data Domain system and SQL backup data to a different Data Domain system. What is a requirement to satisfy these requests? A. Exchange and SQL clients must be placed on different Avamar domains B. Ensure the correct Data Domain system is selected for each client C. Deploy a separate Avamar system at the source and target D. Configure an Accelerator Node to split the replication traffic between the target Data Domain systems : QUESTION 103 Scenario 2 An EMC NetWorker customer wants to add their Microsoft Exchange 2007 servers to their backup environment. The databases are stored on SAN volumes. There are three mailbox servers, each hosting 10 storage groups. Refer to Scenario 2. Which method(s) are available for backup? A. Legacy streaming and VSS B. Legacy streaming only C. VSS only D. MAPI and VSS : QUESTION 104 Scenario 1 You have a customer with a large IBM Lotus Domino environment. The customer is in the process of migrating from a UNIX to a Microsoft Windows infrastructure. As part of this process, they are going to perform a refresh of the hardware and software that Domino is running on. In addition, they will migrate all client backups to a new EMC NetWorker environment. The new backup environment consists of a NetWorker server and two storage nodes running on Windows 2008. The Domino environment consists of a single server running two instances of Domino. The total amount of data that needs to be backed up is approximately 900 GB. The Domino server will have connections to both the SAN and the LAN. They would like to perform hot backups of the databases using the NMDA but are leaving specific design decisions to you.

Additionally, the customer would like to send all data to disk for onsite backups and clone the first full backup of the year to tape for long-term offsite retention. The backup target infrastructure consists of a single Quantum i2000 tape library with six LTO-4 tape drives in addition to two EMC Data Domain 890s. One Data Domain will be located at their primary site. The second Data Domain is at the disaster recovery (DR) site as a replication target for the first. One of the customer's major concerns is the backup speed of the Domino environment. They are interested in any best practices they can implement to improve backup performance at the Domino level. Furthermore, they are looking for guidance in using NMDA to backup the data and leverage their backup infrastructure in the most efficient way. Refer to Scenario 1. The customer has decided to implement DAOS on both Domino instances. What is a requirement to ensure consistent recoverability of all data? A. DAOS directory and the Domino databases must be backed up at the same time. B. A level full backup must always be performed of the DAOS directory. C. A resync of the DAOS repository must be performed prior to backup. D. Domino index updates must be scheduled to occur immediately following the backup. : QUESTION 105 Scenario 6 A customer recently implemented an EMC Avamar solution in their primary data center. The environment consists of several Microsoft applications, including Microsoft SharePoint, Exchange, and SQL. An EMC Data Domain system was also deployed behind Avamar as the backup destination for these applications. There are also several file system clients that have been configured to back up directly to the Avamar server. One Avamar server and two Data Domain systems have been deployed to support this configuration. The Avamar server is operating close to full capacity and there is no room for expansion since it is already fully provisioned with the maximum number of nodes. The Data Domain systems have plenty of capacity left; each system is currently at 35% of utilization. Refer to Scenario 6. The customer realized that one of the SharePoint clients was incorrectly configured to be backed up to the Avamar server instead of the Data Domain system. How can this be fixed? A. Reconfigure the client to Data Domain and perform a full backup B. Reconfigure the client to Data Domain and perform a fastcopy operation to move the backup data to the intended system C. Create another Avamar domain with Data Domain as a device, and then move the client to the new domain D. Reinstall the SharePoint GLR plug-in, selecting Data Domain : QUESTION 106

An EMC NetWorker customer has asked you to deploy a Microsoft Exchange 2010 backup solution using NMM. They have two Microsoft Exchange 2010 servers in a Database Availability group (exch2010a and exch2010b). The exhibit represents the current status of the Exchange databases. Which recovery can be successfully accomplished? A. MDB01 to exch2010b B. MDB02 to exch2010a C. MDB03 to exch2010b D. MDB04 to exch2010b : QUESTION 107 An EMC Avamar customer regularly backs up their SharePoint distributed farm. They noticed that with the backup taken today, Avamar has listed the backup under a different farm name. What is a possible cause? A. Backup was started from another web front-end server B. Web front-end server failed to discover the farm topology C. More than the recommended number of streams was specified in the backup D. One of the servers hosting a content database was not operational

proper answer. QUESTION 108 You are creating a backup solution for a VMware environment and will be using snapshot technology. You want to ensure that your solution follows best practices. What is a consideration when designing this solution? A. Ensure at least 20% free space exists on each datastore for snapshots B. Ensure the backup server has access to the datastores where the virtual machines reside C. Ensure the backup server has administrative privileges to the guest in order to create snapshots D. Ensure each guest has a backup client installed on it to allow the creation of snapshots : QUESTION 109 A customer with a full virtualized environment is protecting their virtual machines (VMs) with EMC NetWorker with VADP proxy host. Even though all the VMs are Microsoft Windows based OS with NTFS, it is not possible to browse the file for recovery. What is the reason for this issue? A. VADP_DISABLE_FLR is set to "Yes" B. VADP_ENABLE_FLR is set to "No" C. VADP_ENABLE_IMAGE is set to "Yes" D. VADP_DISABLE_IMAGE is set to "No" : QUESTION 110 A customer is configuring Oracle servers in their environment for the first time. They would like to use their existing EMC Avamar server to protect these new systems. They have asked you to explain the various point-in-time recovery modes. When using the System Change Number recovery mode, how often is the System Change Number updated in Oracle? A. After every transaction B. After every hour C. After every full backup D. After every backup authenticated.

QUESTION 111 An Oracle customer has configured backups of five Oracle servers to their EMC NetWorker server. Over the past month they have been successfully performing hot backups using the NMDA module. Now, one of the databases has become corrupted and they would like to perform a point-in-time recovery of the database. Which option needs to be included in their RMAN script to perform this action? A. RECOVER B. RESTORE C. APPEND D. NOCATALOG answer is real. QUESTION 112 A customer has an EMC VNX series NAS and two Oracle database servers with 25 TB of data on each database. The customer is considering an Avamar/Data Domain backup solution. What is the most efficient solution for this environment? A. Backup the databases to the Data Domain and the NAS to the Avamar nodes B. Backup the NAS to the Data Domain and the databases to the Avamar nodes C. Backup the databases and the NAS to the Data Domain and setup Avamar to manage the schedules D. Backup the NAS and the databases to Avamar nodes and setup Avamar to manage the schedules : QUESTION 113 Click on the calculator icon in the upper left corner. An EMC NetWorker customer is sizing a NetWorker storage node to backup to their newly purchased Data Domain system. The customer is projecting that a minimum of eight datastreams and a maximum of 40 datastreams will be sent to the Data Domain system. Based on EMC best practice, at a minimum, how much memory should be available for the storage node? A. 2 GB B. 4 GB C. 8 GB D. 16 GB Correct Answer: C : QUESTION 114

An EMC customer has a 10 TB Avamar system with two 10 TB integrated Data Domain systems. The customer is building a disaster recovery (DR) data center and would like to replicate all backups to the DR site. Which setup would meet the requirements for data replication? A. 5 TB Avamar system and two 10 TB Data Domain systems B. 20 TB Avamar system and 20 TB Data Domain system C. 40 TB Avamar system D. 40 TB Data Domain system Correct Answer: B : QUESTION 115 A customer has an EMC NetWorker and Avamar integrated datazone. The datazone consists of an Avamar server, an Avamar replication server, and a single NetWorker server. Backups, restores, and replication have been successful. The customer noticed that expired savesets are not being deleted from the Avamar replication server. What would prevent the savesets from being removed from the Avamar system? A. Destination directory name does not match the Avamar server name B. Avamar HFS check has not run on the remote system C. Media database crosscheck has not run D. Avamar steady state has not been reached appropriate answer. QUESTION 116 A customer has an EMC Celerra with one NFS share that contains five million files. The backup administrator is backing up the entire NAS using EMC NetWorker to a Linux storage node utilizing NDMP. The administrator is noticing that the restore performance is poor despite the good backup speed. Based on the given situation, what can be done to address the poor restore performance? A. Enable DAR during the backups B. Increase the frequency of level 0 backups C. Use VBB in the backup command D. Use tar in the backup command : QUESTION 117 You are designing an EMC NetWorker to Data Domain backup solution for a customer using DD Boost. The customer plans to configure an old server to use as a storage node.

Which factor, in the backup environment, affects the amount of memory that this server should have for optimal backup performance? A. Number of simultaneous save streams B. Amount of backup data C. Number of backup clients D. Size of the Data Domain system straight answer. QUESTION 118 A customer had configured their EMC NetWorker environment to use Data Domain Boost, CIFS, and NFS protocols to back up their local environment. After analyzing the performance of each protocol, the decision was made to only use the DD Boost protocol. The customer reconfigured the NetWorker clients to backup to the already configured Data Domain devices and disabled CIFS and NFS on the Data Domain. After scheduled backups were performed, all backups started to fail. What must be done to perform a successful backup? A. Enable NFS on the Data Domain system B. Remove the CIFS/NFS shares connected to the storage node(s) C. Enable CIFS on the Data Domain system D. Remove the AFTD devices in NetWorker true answer. http://www.gratisexam.com/