Replaceable Spill Containment Never Break Concrete Again EMCO WHEATON RETAIL CORPORATION 2300 Industrial Park Drive Wilson, North Carolina 27893 252-243-0150 252-243-4603 (fax) www.emcoretail.com
Selection Chart Replaceable Spill Containment Single Wall 1 Poly Stainless Steel Poly Thread On Thread On Slip On Glass On Thread On Phase I EVR Below Grade Remote Fill Phase I EVR Drain: A1004EVR-316A A1005-518ADR A1005-905D A1005-517ADR A1004EVR-215A No Drain: A1004EVR-317A A1005-518A A1005-905 A1005-517A A1005-517AF A1004EVR-216A Page #: 3 4 4 4 3 Double Wall 1 Poly Stainless Steel Poly Thread On Thread On Slip On Glass On Thread On Phase I EVR Remote Fill Phase I EVR Drain: A1004EVR-316S A1005-518GPDR A1005-517SFDR A1004EVR-215S No Drain: A1004EVR-317S A1005-518G A1005-518GP A1005-517GS A1005-517SF A1004EVR-216S Page #: 5 6 6 6 5 2 2300 Industrial Park Drive Wilson, North Carolina 27893 252-243-0150 252-243-4759 (fax) www.emcoretail.com
Single Wall Poly (HDPE) Adjustment screws allow change in elevation + - 1 1 /2 (5 gallon models) Thread-On Phase I CARB EVR Certified Screw-on Height 15.0 HDPE Skirt A1004EVR-316A A1004EVR-317A Florida DEP #EQ-524 Replaces all A1004EVR-210 variants Installs on 16 centers Never Break Concrete - Easily repair or replace primary unit from grade without breaking concrete 1 Thread-On 22.6 Heavy duty, snow plow resistant ductile iron, powder coated plow rim Water-resistant cast iron lid with built-in handle, exclusive triple wiper seal and vent valve. Meets AASHTO H20 wheel loading Phase I CARB EVR Certified 18.0 Screw-on Height Galvanized Skirt HDPE bellows 4 inch NPT or BSPT thread Florida DEP #EQ-695 Phase I EVR Certified Executive Order VR-105 Model No. Description Application Lid Dia. Lid Wt. Total Wt. A1004EVR-316A Single wall poly, 16 center, drain, 5 gal, EVR Fill/Vapor 13.2 15.9 lbs. 66.0 lbs. A1004EVR-317A Single wall poly, 16 center, no drain, 5 gal, EVR Vapor 13.2 15.9 lbs. 63.0 lbs. A1004EVR-215A Single wall poly, drain, 15 gal, EVR Fill/Vapor 17.3 30.0 lbs. 126.0 lbs. A1004EVR-216A Single wall poly, no drain, 15 gal, EVR Fill/Vapor 17.3 30.0 lbs. 126.1 lbs. Add a V to the end of the variant number to include an A0076-124S Vapor Swivel Adapter and A0099-002 Vapor Cap; add an X to include an A0030-124S Fill Swivel Adapter and A0097-005 Fill Cap. Refer to pages 7&8 for repair kits and replacement parts. 2300 Industrial Park Drive Wilson, North Carolina 27893 252-243-0150 252-243-4759 (fax) www.emcoretail.com 3
Never Break Concrete - Easily repair or replace primary unit from grade without breaking concrete Installs on 16 centers Heavy duty, snow plow resistant ductile iron, powder coated plow rim Water-resistant cast iron lid with built-in handle, exclusive triple wiper seal and vent valve. Meets AASHTO H20 wheel loading 16 gauge stainless steel primary unit HDPE skirt Below Grade - One-piece, Rustfree Stainless Steel Construction Grade level lid is composite; also available in cast iron or diamond plate with finger hole Below grade lid is water-resistant cast iron lid with built-in handle, exclusive triple wiper seal and vent valve Available with drain or drain plug; models with drain include a Phase I EVR approved pull/push drain design Optional locking mechanism for below grade lid Slip-on Florida DEP #EQ-753 Thread-on Below-Grade Replaceable from above ground Florida DEP #EQ-753 Single Wall Stainless Steel 13.1 15.4 14.7 5 gal. 24.8 15 gal. 17.9 UL Approved Compression Seal 4 NPT or BSPT Thread Model No. Description Application Lid Dia. Lid Wt. Total Wt. Slip-on A1005-517A Single wall stainless steel, no drain, 5 gal Fill/Vapor 13.2 15.9 lbs. 59.0 lbs. A1005-517ADEF Single wall stainless steel, no drain, composite lid, 5 gal DEF 13.2 6.6 lbs. 49.7 lbs. A1005-517ADR Single wall stainless steel, drain, 5 gal Fill/Vapor 13.2 15.9 lbs. 59.5 lbs. Thread-on A1005-518A Single wall stainless steel, no drain, 5 gal Fill/Vapor 13.2 15.9 lbs. 80.7 lbs. A1005-518ADR Single wall stainless steel, drain, 5 gal Fill/Vapor 13.2 15.9 lbs. 81.2 lbs. A1005-518ADRDEF Single wall stainless steel, drain, composite lid, 5 gal DEF 13.2 6.6 lbs. A1005-905 Below grade, stainless steel, 18 manhole, drain plug, 5 gal Fill/Vapor 17.0 13.5 lbs. 78.8 lbs. A1005-905D Below grade, stainless steel, 18 manhole, drain, 5 gal Fill/Vapor 17.0 13.5 lbs. 79.0 lbs. A1005-915 Below grade, stainless steel, 18 manhole, drain plug, 15 gal Fill/Vapor 17.0 13.5 lbs. 97.8 lbs. A1005-915D Below grade, stainless steel, 18 manhole, drain, 15 gal Fill/Vapor 17.0 13.5 lbs. 98.0 lbs. Add a V to the end of the variant number to include an A0076-124S Vapor Swivel Adapter and A0099-002 Vapor Cap; add an X to include an A0030-124S Fill Swivel Adapter and A0097-005 Fill Cap. Refer to pages 7&8 for repair kits and replacement parts. 4 2300 Industrial Park Drive Wilson, North Carolina 27893 252-243-0150 252-243-4759 (fax) www.emcoretail.com
Adjustment screws allow change in elevation + - 1 1 /2 (5 gallon models) Thread-On Double Wall Poly (HDPE) Phase I CARB EVR Certified Screw-on Height 17.1 A1004EVR-316S A1004EVR-317S Florida DEP #EQ-741 Replaces all A1004EVR-210 variants Installs on 16 centers Never Break Concrete - Easily repair or replace primary unit from grade without breaking concrete Heavy duty, snow plow resistant ductile iron, powder coated plow rim Water-resistant cast iron lid with built-in handle, exclusive triple wiper seal and vent valve. Meets AASHTO H20 wheel loading HDPE bellows Galvanized skirt 4 inch NPT or BSPT thread 1 Thread-On Phase I CARB EVR Certified Florida DEP #EQ-695 19.0 Screw-on Height 22.6 Phase I EVR Certified Executive Order VR-105 Model No. Description Application Lid Dia. Lid Wt. Total Wt. A1004-316S-CM Double wall poly, 16 center, drain, sensor, 5 gal Fill/Vapor 13.2 15.9 lbs. 78.0 lbs. A1004EVR-316S Double wall poly, 16 center, drain, 5 gal, EVR Fill/Vapor 13.2 15.9 lbs. 84.0 lbs. A1004-316S-CMX Double wall poly, 16 center, drain, sensor ready, 5 gal Fill 13.2 15.9 lbs. 77.5 lbs. A1004EVR-317S Double wall poly, 16 center, no drain, 5 gal, EVR Fill/Vapor 13.2 15.9 lbs. 79.9 lbs. A1004-317S-CM Double wall poly, 16 center, no drain, sensor, 5 gal Fill/Vapor 13.2 15.9 lbs. 77.5 lbs. A1004EVR-215S Double wall poly, drain, 15 gal, EVR Fill/Vapor 17.3 30.0 lbs. 151.0 lbs. A1004EVR-216S Double wall poly, no drain, 15 gal, EVR Fill/Vapor 17.3 30.0 lbs. 151.1 lbs. A1004-215SF4 Glass-on remote fill, double wall poly, drain, 15 gal Remote Fill 17.3 30.0 lbs. A1004-216SF4 Glass-on remote fill, double wall poly, no drain, 15 gal Remote Fill 17.3 30.0 lbs. Add a V to the end of the variant number to include an A0076-124S Vapor Swivel Adapter and A0099-002 Vapor Cap; add an X to include an A0030-124S Fill Swivel Adapter and A0097-005 Fill Cap. Refer to pages 7&8 for repair kits and replacement parts. 2300 Industrial Park Drive Wilson, North Carolina 27893 252-243-0150 252-243-4759 (fax) www.emcoretail.com 5
Double Wall Stainless Steel Slip-on 13.1 9.6 Never Break Concrete - Easily repair or replace primary unit from grade without breaking concrete Florida DEP #EQ-764R UL Approved Compression Seals Installs on 16 centers Heavy duty, snow plow resistant ductile iron, powder coated plow rim Thread-on Water-resistant cast iron lid with built-in handle, exclusive triple wiper seal and vent valve. Meets AASHTO H20 wheel loading 15.4 16 gauge stainless steel primary and secondary units HDPE skirt Florida DEP #EQ-764R A1005-518GP 4 inch NPT or BSPT Thread Model No. Description Application Lid Dia. Lid Wt. Total Wt. Slip-on A1005-517G Double wall stainless steel, no drain, gauge, 5 gal Fill/Vapor 13.2 15.9 lbs. 84.5 lbs. A1005-517GDEF DW stainless steel, no drain, gauge, composite lid, 5 gal DEF 13.2 6.6 lbs. 75.8 lbs. A1005-517S-CM Double wall stainless steel, no drain, sensor, 5 gal Fill/Vapor 13.2 15.9 lbs. 68.3 lbs. A1005-517GS DW stainless steel, no drain, gauge, 5 gal, Allegheny seal Viton Fill/Vapor 13.2 15.9 lbs. 78.5 lbs. A1005-517GSN DW stainless steel, no drain, gauge, 5 gal, Allegheny seal Nitrile Fill/Vapor 13.2 15.9 lbs. 78.5 lbs. Thread-on A1005-518G Double wall stainless steel, no drain, gauge, 5 gal Fill/Vapor 13.2 15.9 lbs. 85.3 lbs. A1005-518GP Stainless steel primary, poly secondary, no drain, gauge, 5 gal Fill/Vapor 13.2 15.9 lbs. 91.0 lbs. A1005-518GPDR Stainless steel primary, poly secondary, drain, gauge, 5 gal Fill/Vapor 13.2 15.9 lbs. 91.5 lbs. Add a V to the end of the variant number to include an A0076-124S Vapor Swivel Adapter and A0099-002 Vapor Cap; add an X to include an A0030-124S Fill Swivel Adapter and A0097-005 Fill Cap. Refer to pages 7&8 for repair kits and replacement parts. 6
Replacement Parts Lids A1004EVR-210 Series A1004-210LID Black, Cast Iron A1004-210LID-C Black, Composite A1004-210LID-D Yellow, ULSD, Cast Iron A1004-210LID-CD Yellow, ULSD, Composite A1004-210LID-R A1004-210LID-CR White, Regular, Cast Iron White, Regular, Composite A1004-210LID 15.3 Diameter A1004-210LID-U Red, Ultra/Premium, Cast Iron A1004-210LID-CU Red, Ultra/Premium, Composite A1004-210LID-V Orange, Vapor, Cast Iron A1004-210LID-CV Orange,Vapor, Composite 571815 Triple Wiper Seal A1004-215 Series 494554 Lid & Seal Kit 569227 Triple Wiper Seal Repair Kits A1004EVR-210 Series 494360EVR 494466EVR 494466DEVR 494350EVR 494350EVR-CM 494467EVR 494467EVR-CM 494467DEVR Lid Included with all Replacement Kits Drain Kits 494554 17.3 Diameter Primary Replacement Kit (EVR-210A) Primary Replacement Kit (EVR-211A) Primary Replacement Kit (EVR-211AD) Primary Replacement Kit (EVR-210S) Primary Replacement Kit (EVR-210S-CM) Primary Replacement Kit (EVR-211S) Primary Replacement Kit (EVR-211S-CM) Primary Replacement Kit (EVR-211SD) A1004EVR-316 Series A1004-316LID Lid & Seal, Composite A1004-316CLID Lid & Seal, Cast Iron A1004-316LID-D Yellow, ULSD, Composite A1004-316CLID-D Yellow, ULSD, Cast Iron A1004-316LID-R White, Regular, Composite A1004-316CLID-R White, Regular, Cast Iron A1004-316LID-U Red, Ultra/Premium, Composite A1004-316CLID-U Red, Ultra/Premium, Cast Iron A1004-316LID-V Orange, Vapor, Composite A1004-316CLID-V Orange, Vapor, Cast Iron 570012 Triple Wiper Seal A1004-316LID 13.2 Diameter A1004EVR-316 Series 494797EVR Primary Replacement Kit (EVR-316A) 494798EVR Primary Replacement Kit (EVR-317A) 494794EVR Primary Replacement Kit (EVR-316S) 494794EVR-CM Primary Replacement Kit (EVR-316S-CM) 494795EVR-CM Primary Replacement Kit (EVR-317S) 494836 Primary Ri m Kit A1004EVR-215 Series 494550EVR 494660EVR A1004-316CLID 13.2 Diameter Primary & Secondary Replacement Kit (-215S) Primary & Secondary Replacement Kit (-216S) 494551 A1004-316 Poly 494551S A1005 Stainless Steel Drain Plugs & Adapters 494697P 1 plug no epoxy 494697 3 plugs, epoxy Replaces 494551 Drain 494697S 1 plug no epoxy Replaces 494551S Drain 493508K Series: A1004-003 A1004-010 495202 1 plug, no epoxy 494698 3 plugs, epoxy Replaces 493508K & 494118 Drains 494118 EVR Series 494875 Adapter Kit 494551 Drain 2.26 top dia. 493820 Drain Wrench For use on 493508K and 494118 drains 494952 Adapter Kit 494118 Drain 4.0 top dia. 2300 Industrial Park Drive Wilson, North Carolina 27893 252-243-0150 252-243-4759 (fax) www.emcoretail.com 7
Replacement Parts Replacement Parts/Tools Dip Sticks 494367 494641 A1004EVR Series A1004-210/-316 Series Tools/Accessories A1004-001GAGE - EZ-Gage for use on 5 gallon double wall spill containment in place of a dipstick. The EZ-Gage allows for hands-free, visual inspection of interstitial space, displaying green (OK) or red (TEST) to indicate if liquid removal is required. A1004-001SEN Replacement sensor kit for S-CM models A0031-175 1.75 ht. A0031-250 2.50 ht. A0081-001 Swivel Adapter Wrench A0081-001H Wrench, Primary Base Removal Test Equipment A0081-001S Wrench, Secondary Base Removal A0028-001 Riser Lock A0333-002 Hand Pump A0333-003 Includes mounting bracket for 15 gallon series A1004-210TEST Vacuum Apparatus w/test Adapter Replacement Parts for A1004-210TEST: 569194 Air Switch 569195 Air Regulator 494343 Test Adapter 569143 Test Cap Assembly 8 2300 Industrial Park Drive Wilson, North Carolina 27893 252-243-0150 252-243-4759 (fax) www.emcoretail.com O-1008 05/16