part of Aker Kristian Risdal SVP C&T MMO 2010 Aker Solutions
MMO - Field life solutions 1992 Tie-in 1997 Decommissioning 1999 Satellite tie-in 1998 Platform integrity Statfjord B 2001 Compression modification Maureen 2004 Duty holder Gullfaks C 2005 Conversion to gas production Veslefrikk 2008 Reanalysis and studies Sleipner 2009 Drilling upgrade AH-001 2010 Swivel replacement Aker Solutions delivers: 2010In-service inspection Statfjord Low pressure A, B, C high value added 2010 production Ekofisk technologies and Oseberg B services in selected niches, Norne complex facility upgrade solutions, and Mongstad decommissioning technologies and services. Kristin Photo copyright Statoil, ConocoPhillips, Talisman, Total Slide 2 2010 Aker Solutions part of Aker
Mature fields is a growing market for Aker Solutions Debottelnecking Process improvements IOR Water injection Low Pressure Production Satellite tie-backs Drilling upgrades EOR Next step New technology Increased field life Safety solutions Technical integrity Inspection technology Field development Concept and technology > Facility upgrades Decommissioning 0,5-4 years Up to 40 years 1-4 years Examples of projects that can increase oil recovery Process improvement Gudrun tie-back Oseberg B Rig renewal Åsgard gas compression to Januar edit this 2011 text Slide 3 2010 Aker Solutions part of Aker
Concept and Technology (C&T) MMO; Locations and capacity Concept and technology Inspection and maintenance technology 494 168 149 Trondheim 25 110 Bergen 278 Aberdeen 35 25 35 Stavanger 149 Stavanger Bergen Trondheim Aberdeen Slide 4 2010 Aker Solutions part of Aker
MMO C&T Offering Stavanger Bergen Trondheim Aberdeen Front end Front end Front end Front end Flow assurance and dynamic simulations New technology Coabis Structural analysis and decommissioning Riser solutions Risk and decision making Laser scanning and modelling Structural analyses Flow assurance Asset management Inspection and maintenance technology Hazop Floater solutions SIL Computational fluid dynamics (CFD) Structural inspection and maintenance programme (SIMP) Technical integrity management services (TIMS) Slide 5 2010 Aker Solutions part of Aker
Existing technology services IOR projects Structural Fire Design / Structural Integrity Laser scanning and 3D Remodeling Inspection and maintenance technology (Advanced NDT Technology) Decommissioning Slide 6 2010 Aker Solutions part of Aker
IOR; Concept Selection, Feed and EPCI Photo: Statoil Photo: Statoil Illustration: Eni Norge Kristin low pressure production (LPP) Oseberg B drilling upgrade Marulk tie-in Slide 7 2010 Aker Solutions part of Aker
Structural Fire Design Integrated Analyses Kameleon FireEx analysis based on realistic leakage scenarios Corresponding non-linear structural response analysis Sufficient need for mitigating measures is found (e.g. fire protection, deluge, sectionalisation) KFX fire simulations Non-linear structural response Slide 8 2010 Aker Solutions part of Aker
Specialist Service - Laser scanning and 3D remodeling Laserscanner Pointcloud TruView 3D model PDMS Internet accessible Engineering Study Phase Engineering Phase Result: -Saved offshore trips, reduced POB -508 000 points/sec (surveyor 1 point/sec) -TruView`s, 360 panorama useful for all disciplines -Improved quality in engineering -Early involvement and scanning beneficial Slide 9 2010 Aker Solutions part of Aker
Decommissioning market Experiences from Maureen GBS and Frigg & MCP01 Huge growing market Cost per year (Bn NOK) No. of platform removals 35 30 25 20 15 10 Cost NCS Cost UKCS No. of platforms NCS No. of platforms UKCS 350 installations (UK/N 290/60) Market value 160-200 bn NOK Key prospects; Brent Valhall Statfjord A Large jackets UK 5 0 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 Year of platform removal FMRD Model (FEED-Modification-Removal-Disposal) Close-down FEED Modification (Engineering & Preparation) Removal Disposal Offshore preparation can be regarded as an modification task without fabrication/installation (AKSO key competence) Slide 10 2010 Aker Solutions part of Aker
Aker Solutions Inspection and Maintenance Technology Asset Integrity Management Technical Integrity Management Service (TIMS ) Maintenance Engineering Structural Integrity Advanced NDT Phased Array Eddy Current & RFT Thermo Scale mapping Vibration/Fatigue/Stress Digital Radiography Rig Inspection Structures Equipment Rope Access In Service Inspection Fabrication and Weld Inspection Inspection Strategy Inspection planning Weld and Surface inspection Weld Inspection Welder certification Welding Procedure Qualification Corrosion under insulation Non Intrusive Inspection (NII) to February edit this 2011 text Slide 11 2010 Aker Solutions part of Aker
Advanced NDT technology Heat Exchanger Tube Inspection Advanced Ultrasonic Phased Array ultrasonic Thermographic Inspection Thermographic scale mapping Gas find Vibration & Stress Measurement 42,4 C 40 35 30 Temperatureline 1 25 20 16,1 C Slide 12 2010 Aker Solutions part of Aker
Buoyancy Tank Assemblies (BTA) for large jacket removal 48 large jackets UK/N weighing more than 8 000 tons Competition with HLVs (subsea sectionalizing and multiple lifts) BTA technology proven on Frigg DP2for transport to shore Reversed launching method to shore to be further developed Standardization of friction clamps to replace lifting brackets Removal of Frigg DP2 in 2009 Reversed launching Slide 13 2010 Aker Solutions part of Aker
Decommissioning technologies Large Demolition Excavators for piece small removal of integrated topsides Jack-up rig with relocatable deck and LQ (AKSO patent) Weighing membranes for weighing of modules FlexSeaFast for transport of large structures Key subcontracted technology areas; Subsea; cutting, ROV, dredging, debris removal Cleaning & flushing Large Demolition Excavators External/internal lifting tools Heavy lifting Slide 14 2010 Aker Solutions part of Aker
New technology services TIMS 3D visualisation and simulation IPort EOR Slide 15 2010 Aker Solutions part of Aker
Technical Integrity Management System An Aker Solutions initiative within Integrity Management Services. Slide 16 2010 Aker Solutions part of Aker
Use of 3D visualisation and simulation drilling rigs Some reference cases BP s Valhall IP Performance Optimisation Phase 1 All deliveries on time and budget Offshore commissioning time reduced with 70% for new TFM Each day in simulator = one day saved NPT rig time ROI for simulator within the first 6 months of operation First well after upgrade fastest ever drilled at Valhall IP Simulator has been a major contribution to Rig NPT decrease from 8%-2% Vantage (TMT 1) Platinum explorer, Drillhship newbuild Simulator used for Trouble shooting during commissioning Pre commissioning of CTRL systems Contributed to commissioning and delivery on time to Statoil edit this NCS text Rig CAT D Slide 17 2010 Aker Solutions part of Aker
IPort facilities Crew Changeover Briefing/Training Well Construction and Drilling Management Operator Simulator Training Mission Control and Support Rig Constructio n E support - Condition Based Monitoring Rig Concept Phase Upgrade and Modification to Statoil edit this NCS text Rig CAT D Slide 18 2010 Aker Solutions part of Aker
EOR How do we get more oil from the Norwegian Continental Shelf? Illustration: The Norwegian Oil Directorate Slide 19 2010 Aker Solutions part of Aker
The last drop Slide 20 2010 Aker Solutions part of Aker
Aker Solutions is part of the EOR future Aker Solutions has high ambitions to play an proactive role in future EOR challenges. Aker Solutions have started initiatives with NTNU EOR challenges Technology development and pilots to be focused The oil business has an common goal in reducing the EOR cost Projects with high risk will in many cases be replaced by other good IOR projects. Building on total Aker Solutions capabilities to become the preferred partner: Aker Offshore Partner Aker Geo Aker Process Systems Aker Well Services Aker Engineering & Technology Slide 21 2010 Aker Solutions part of Aker
Thank you for your attention! Don t hesitate to contact us if you have any questions. Heia Norge! Slide 22 2010 Aker Solutions part of Aker
Copyright Copyright of all published material including photographs, drawings and images in this document remains vested in Aker Solutions and third party contributors as appropriate. Accordingly, neither the whole nor any part of this document shall be reproduced in any form nor used in any manner without express prior permission and applicable acknowledgements. No trademark, copyright or other notice shall be altered or removed from any reproduction. Slide 23 2010 Aker Solutions part of Aker
Disclaimer This Presentation includes and is based, inter alia, on forward-looking information and statements that are subject to risks and uncertainties that could cause actual results to differ. These statements and this Presentation are based on current expectations, estimates and projections about global economic conditions, the economic conditions of the regions and industries that are major markets for Aker Solutions ASA and Aker Solutions ASA s (including subsidiaries and affiliates) lines of business. These expectations, estimates and projections are generally identifiable by statements containing words such as expects, believes, estimates or similar expressions. Important factors that could cause actual results to differ materially from those expectations include, among others, economic and market conditions in the geographic areas and industries that are or will be major markets for Aker Solutions businesses, oil prices, market acceptance of new products and services, changes in governmental regulations, interest rates, fluctuations in currency exchange rates and such other factors as may be discussed from time to time in the Presentation. Although Aker Solutions ASA believes that its expectations and the Presentation are based upon reasonable assumptions, it can give no assurance that those expectations will be achieved or that the actual results will be as set out in the Presentation. Aker Solutions ASA is making no representation or warranty, expressed or implied, as to the accuracy, reliability or completeness of the Presentation, and neither Aker Solutions ASA nor any of its directors, officers or employees will have any liability to you or any other persons resulting from your use. Aker Solutions consists of many legally independent entities, constituting their own separate identities. Aker Solutions is used as the common brand or trade mark for most of these entities. In this presentation we may sometimes use Aker Solutions, we or us when we refer to Aker Solutions companies in general or where no useful purpose is served by identifying any particular Aker Solutions company. Slide 24 2010 Aker Solutions part of Aker