Version 4.2.1.0 Release date: 10. June 2014 User Login History. On this page the admin user is now able to see log-in and logout statistics for his company. The table shows which users have logged in to the Client/Admin modules and when. Container Event type has now been added to the subject field of Event emails. The subject field now includes: <Company>, Container Event type on <ContainerID> at <IsoDateTime>, <Geozone> Note: Revision no. changed to align with new internal standard. Version 2.11.0 Release date: 8. May 2014 New controller firmware update tool. The Smart Firmware Update application is a tool for automatic update of controller firmware. The admin user can set up a number of customized tasks based on geo-fencing and set specific rules for execution of each task. The Global Monitoring Sever has now been updated to be compatible with latest Carrier firmware releases 5139 & 5339. Container photo for Star Cool SCC6 controller has now been updated.
Version 2.10.0 Release date: 13. March 2014 Improvements to E-mail alarm notifications module. It is now possible to configure forwarding of e-mails events based on geo-zones. This means that if a container generates an event in one specific geo-zone, this event can now be forwarded to a responsible person in that geo-zone. It is possible to setup multiple geo-zones for each alarm/event category (Warning, Normal, Critical) New container firmware report. This new report provides an overview of the installed software versions in a fleet of containers, categorized by the different makers. The report will allow a container owner to take required actions, for containers which still need to be updated. Remote setting of efficiency mode on Carrier containers (Off, Standard, Full) is now avaliable in the container detail window
Version 2.9.0 Release date: 12. December 2013 New mobile friendly website has been released. This Container Status website allows smart phone users to search for a specific container and view the latest 24 condition logs and view the location and snail-track on a map. The user can also command a get status and initiate defrost The mobile friendly website is available on http://cs.proacttransport.com and by saving as a bookmark on your mobile phone, this will appear and work as an APP (requires internet connection) Introduction of dedicated link in alarm and event e-mails to the new Container Status mobile friendly website, which will allow for third-party companies to access this specific container, without having general login credentials to container owner account. It is now possible to subscribe to an e-mail event for containers handled with an excessive G-force event. It is now possible to export historical container condition data as.kml file. This allows the user to view historical data as snail track in Google Earth and other mapping programs supporting.kml files Additional information has been added in Genset Condition view. This view now includes the two columns Previous Location (Geozone) and GPS Position, so it becomes easier to follow the genset travel. Additional information has been added in Genset Equipment view. This view now includes the column IMEI No for easier identification of installed Composit Improved support for Carrier Controller alarms Bug Fixes: Resolved perfomance issue with container list viewing introduced in v.2.8.0
Version 2.8.0 Release date: 20. November 2013 GMS Software release notes Search functionallity has been improved, so it is now simpler to search for a specific container in a specific date Only valid container IDs are now shown in Container Views. Following prefixes are now only shown on Malfunction view; LOSU/RMMU/RAND/XLOD/SPAR Carrier Controller support has been updated with latest alarm definitions and, containers with latest Carrier software (v5155 and v5355) are now correctly recognized with controller type Daikin Controller Support has been updated with latest Alarm definitions Thermo King Controller Support has been updated with latest Alarm definitions Star Cool Controller Support has been updated with latest Alarm definitions Admin module: It is now possible to delete existing users Admin Module: It is now possible to enable/disable Genset views and Container views in the Client module Bug Fixes: Trendcurve has been improved, so Power OFF periods are now always shown correctly Various minor bug fixes
Version 2.7.7 Release date: 21.August Event E-mail now contains last 10 condition readings is now included in e-mail. Event E-mail now includes acount name and geozone in Subject field Version 2.7.6 Release date: 6.March 2013 E-mail Event module has been improved with following functionality for following RMM+ generated events: Change of setpoint (either remote or locally) Temperature, Humidity, Ventilation, O2, CO2 Prolonged Power OFF periods Depending on Chilled or Frozen Cargo Triggers at 1, 2, 3, 4 hours Power off periods Deviations between temp setpoint and supply/return Depending on Chilled or Frozen Cargo Triggers at delta temp 1, 2, 3, 4 degrees Version 2.7.5 Release date: 12.December 2012 Updated Carrier photo for Carrier PrimeLINE/EliteLINE Bug fixes: Variuos number of bug fixes
Version 2.5.2 Release date: 26.April 2012 Container condition View Export to Excel, now also full historical view New container Equipment view. This view includes Last tripstart, Last defrost, PTI information, Controller software version, RMM+ software version. (some information depends on manufacturer availability) Container detail view now includes Equipment tab Container detail view now includes Connectivity tab, showing RMM+ connectivity information Map and container details are now linked, so it is possible to select a point on a snail track and jump to that time line in history log. Now user is notified if Silverlight is not installed If container is OFF power, it is now shown as a grey dot on the map Container photos for Magnum and Magnum+ have been updated Now system automatically suggest filename when saving files. Remote command added. Now it is possible to initiate a manual defrost System now automatically send e-mails to new created users (admin module) Now possible to set default settings per company (admin module) Version 2.4.2 Release date: 20. January 2012 Support for Genset tracking
Version 1.7.3 Release date: 16.march 2011 Improved security using encrypted communication and secure identification of the network web server ( SSL/HTTPS based access) Faster startup of GMS+ System now remembers your login name Sorting, filtering, and paging functionality is improved in all views It is now possible to view containers for any period of time (previously limited to containers which had communicated the last 28 days) Minor bugs have been corrected Change over to improved database-scheme, however only data available from December 2010 Version 1.6.5. Release date: 5. February 2011 Version number and subversion number is now shown correctly in user interface Alarm creating time is now added to each alarm When exporting an Excel file, the container ID and time span is now included in the file name. Support for Firefox browser Brief PTI functionality added to remote operation (as selection under PTI) Remote commands functionality improved when container is offline (making it possible in any case to issue a command) Improved handling of geofences, so a container sticks to a geofence, despite inaccuracy in GPS reciever
All users are now directed to version 1.6.5 Bug fixes in relation to dot and comma notation when entering set points Bug fixes in relation to inconsistency in alarm counts between alarm view and detail view