Effective Date: 8/1/2011 Page 1 of 6 Description: (Descripción) 1.0 Purpose (Objetivo) 2.0 Scope (Alcance) 3.0 Fixture List (Lista de Materiales) 4.0 Activities (Actividades) Prepared By: Daniel Flores Approved By: David Lin
Effective Date: 8/1/2011 Page 2 of 6 Revision History (Historico de Revision) Revision Reason of change Prepared By Approved By Date (Revision) (Razon del Cambio) (Preparado Por) (Aprovado por) (Fecha) Rev 0 New Released (Nueva Publicacion) 8/1/2011
Effective Date: 8/1/2011 Page 3 of 6 Table of Contents (Contenido) 1.0 Purpose (Objetivo)... 4 2.0 Scope (Alcance)... 4 3.0 Fixture List (Lista de Materiales)... 4 3.1 SMS Notebook AC Adapter Tester (Probador de AC Adapter SMS)... 4 3.2 Power Coble (Cable de Poder)... 4 3.3 Input power source range 110V 240V (Alimentacion 110v 240v)... 4 4.0 Activities(Actividades)... 4 4.1 Setup (Configuracion)... 4 4.2 Testing Steps (Pasos de la Prueba)... 4
Effective Date: 8/1/2011 Page 4 of 6 1.0 Purpose (Objetivo) This procedure is guide line to verify notebook AC Adapter function. (Este procedimiento es una guía para la realización de las pruebas de funcionamiento de los AC Adapter de Laptop) 2.0 Scope (Alcance) This procedure will cover verify notebook AC Adapter function. (Este procedimiento cubrirá la verificación del funcionamiento de los AC Adapter de Laptop) 3.0 Fixture List (Lista de Materiales) 3.1 SMS Notebook AC Adapter Tester (Probador de AC Adapter SMS) 3.2 Power Coble (Cable de Poder) 3.3 Input power source range 110V 240V (Alimentacion 110v 240v) 4.0 Activities (Actividades) 4.1 Setup (Configuracion) 4.1.1 Setup SMS Notebook AC Adapter tester (Instale el Probador de AC Adapters SMS) 4.1.2 Connect power cord with power source (Conecte el Cable de Poder a la Aimentacion) 4.1.3 Turn on Main power, both LED screen will do initial testing verify (Encienda el equipo, los displays mostraran la verificacion inicial) 4.1.4 Until both LED show [0000], test unit is ready to test AC Adapter (Cuando el display muestre [0000] la unidad estara lista para realizar las pruebas) 4.2 Testing Steps (Pasos de la Prueba) 4.2.1 Prepare need test Notebook AC adapter, connect power cord, plug in with power source (Prepare el AC Adapter a probar, conecte el cable de poder al adaptador y a la alimentacion)
Effective Date: 8/1/2011 Page 5 of 6 4.2.2 Choose right power connector jack (Escoja elconector adecuado) 4.2.3 Plug-in AC adapter will tester power jack (Conecte el AC Adapter a probar en el conector adecuado)
Effective Date: 8/1/2011 Page 6 of 6 4.2.4 Check Right LED screen is show the right voltage of the adapter (Verifique el display de la DERECHA, este le proporcionara el voltaje entregado por el AC Adapter) 4.2.5 Check Left LED screen have charge IC value (Verifique que el display de la IZQUIERDA muestre algun valor del IC de carga) 4.2.6 If both LED show correct information this adapter is OK (Si ambas pantallas muestran información correcta, el AC Adapter está en buenas condiciones) 4.2.7 If one of LED not show any value, this adapter is fail (Si alguno de las pantallas NO MUESTRA NINGUN VALOR, el AC Adapter esta dañado)