RecurDyn V7R4 Release Notes

RecurDyn V7R4 Release Notes

Supported Product Professional Toolkit Product RecurDyn x86 V7R3 x64 RecurDyn/Modeler V V RecurDyn/Solver V V RecurDyn/ProcessNet V V RecurDyn/AutoDesign V V RecurDyn/CoLink V V RecurDyn/FFlex V V RecurDyn/RFlex V V RecurDyn/Linear V V RecurDyn/CATIA Read & Write V V RecurDyn/EHD(Steyr) RecurDyn/ECFD_EHD V V RecurDyn/Contol V V RecurDyn/Hydraulic RecurDyn/MeshInterface V V RecurDyn/Bearing V V RecurDyn/Driver RecurDyn/Spring V V RecurDyn/Tire Tire, SoilTire V V MFTire, FTire RecurDyn/Belt V V RecurDyn/Chain V V RecurDyn/Crank V V RecurDyn/Engine V V RecurDyn/Gear V V RecurDyn/HAT V V RecurDyn/MTT2D V V RecurDyn/MTT3D V V RecurDyn/Piston V V RecurDyn/TimingChain V V RecurDyn/Track_HM V V RecurDyn/Track_LM V V RecurDyn/Valve V V V V V V Latest version of Parasolid supported: V18.1 Latest version of FEMAP supported : 9.31 Latest version of STEP supported : In case of STEP have no version Latest version of IGES supported : 5.3 Latest version of ACIS supported : 18.0 Latest version of CATIA supported: 18.0 Latest version of VSTA of PNet supported : 1.0 Any compiler version related to the use of user subroutine and the creation of dll's : MS VS 6.0

Installation RecurDyn Network Server Version If Administrator installs the RecurDyn Network Server version in the server computer and distribute the RecurDynNetworkClient.bat file to client, that you can run RecurDyn by using above batch file in their local computer without installing RecurDyn. To see more details, refer to Installation Guide.

BN0158(x86)/BN0159(x64) RecurDyn/Professional Fixed Problems When you opened the file saved after the batch simulation, the RPLT file was not imported automatically in Plot. When you imported the text file in Plot, RecurDyn was crashed if the text header column was greater than the data column. The Japanese x_t file was not imported or exported after the execution of ProcessNet. The Japanese characters were not correctly displayed in the Plot database windows. RecurDyn/ProcessNet Fixed Problems RecurDyn was crashed when you used the IModelDocument.ChangeDataStorage() function in your ProcessNet codes. When you made MTT2D Sheet Group with ProcessNet, the thickness was incorrect. When the model was saved after you set the UseMotion flag of Joint, you did not open it. When Solid Contact was set by it with ProcessNet after you made the Boolean geometry, the position of geometry was displayed incorrectly. When you used multiple panes of Plot with ProcessNet after the chart was clear, they did not displayed. The IPlotDocument.ExportData function was used in the data of FullName which did not contain the root string.

BN0146(x86)/BN0147(x64) RecurDyn/Professional Batch Option related to Solver Settings The batch otion related to Solver Settings is added as follow. SOLVERCLASS [IF/CF] SOLVERTYPE [DLL/EXE] NTHREAD [the number in the range of 0 to 4] Fixed Problems When the value of Maximum Stiction Deformation on the Characteristic property of contact was saved, the value was saved a different value, not the desired value. When the Properties page of Cam2D Contact which was used the simple edge line was opened, RecurDyn was crashed. When the node marker was used as the base/reference marker in the Displacement or Velocity or Acceleration type of RFLEX Request, it was calculated as the rigid marker. RecurDyn/ProcessNet Fixed Problems The ProcessNet function could not be used after the invalid dll was used in the Run ProcessNet dialog box. RecurDyn/CoLink Fixed Problem When a CoLink model was in the folder which is written by many languages, the simulation was not performed.

RecurDyn/RFlex Fixed Problem When the name of RFI file or the path of RFI file had spaces, the simulation was not performed. When the node included an element in Ansys was more than 200, the body shape of RFlex in the modeler was wrong. RecurDyn/Control MATLAB 7.9.0(R2009b) Support MATLAB 7.9.0(R2009b) is supported for the co-simulation with Simulink. RecurDyn/Crank Use Amalgamation Option You can make more correct surfaces for given points, if you set Use Amalgamation Option which integrates the knot vector of curve as following recommendations. If the number of points is large, check Use Amalgamation Option. If the number of points is small, uncheck Use Amalgamation Option. RecurDyn/MTT3D Fixed Problems The location of Movable Roller was returned to the state which was before extracting after using the Extract function.

BN0136(x86)/BN0137(x64) RecurDyn/Professional Symmetric Multi Processing Module The Symmetric Multi Processing (SMP) module is used in the IF solver. So, RecurDyn supports the Parallel Processing in the Shared Memory system. The Parallel Processing in the IF solver supports the FFlex toolkit, the Belt toolkit, the Chain toolkit, the Track HM/LM toolkit, the MTT3D toolkit. You can use four threads by a solver license. The SMP analysis method is to analyze the memory separetely when more than two computers exist in the same computer. It is different from the parallel treat in the Distributed Memory system. Initial Velocity of Solver Settings in Program Settings You can impose initial velocities of joints relatively or absolutely. Exporting the RAN File(Solver-Generated Animation) You can export the RAN file in the advanced tab of each Anaysis dialog box. Cone To Cylinder Contact You can use Cone To Cylinder Contact. Add to Database in Data Analysis of Plot You can use the Add to Database function in Data Analysis of Plot. Draw Multi Curves You can draw curves of multiple items using the Draw dialog box. Solver Type of Solver Settings in Program Settings You can select Solver Type as IF Type or CF Type in Solver Settings of Program Settings. The CF solver is the preexistence solver and keeps the preexistence values. The IF solver is the new solver and supports the multi-core thread. IF Type of FFlex Options in Model Settings The IF Type of linear solver was added in FFlex Options of Model Settings. Interpolation Type of Curve in Joint and Contact The curve for Interpolation in PTCV and CVCV, the curve for Interpolation in Cam2D Contact and Cam2DLine Contact have the Cubic function and

the 5 th polynomial function. Curve(non-uniform) : New Function Poly5(non-uniform) : New Function Curve(uniform) : Preexistence Function( V7R3 s Interpolation Method) Poly5(uniform) : Preexistence Function( V7R3 s Interpolation Method) * Uniform is that the length of curve segments are same. * Non-uniform is that the length of curve segments are different. Display of Contact Entities in the Database Window You can change entities name and edit entities by selecting the displayed contact entities in the Database Window. Multiple Inactivation in the Database Window You can select the Inactive menu by multi-selecting for entities supported the inactive function. Inactive Flag in Request Inactive Flag in Request allows using the Inactive menu in the Database Window. Drag and Drop for the Creation of a Joint or Force You can select a desired item by drag and drop from the Database window to the Modeling Command Input Toolbar when a joint or force is created. Toolkit Configuration Tool RecurDyn checks the specified toolkit license at the startup of RecurDyn. TktCfg.exe generates the SetToolkitConf.bat file when using the /BATCH option. SetToolkitConf.bat contains the current configuration and other samples how to use TktCfg.exe. SetToolkitConf.bat is used in the RecurDyn Network Server version. Importing or Exporting the desired data of Custom View You can import or export the desired custom view data using the Import button or Export button. Objects automatic movement in Advanced of Object Control You can translate or rotate or align objects automatically in Advanced of Object Control. Changed Functions Focus on Memory in the IF solver In the IF solver, the Focus on Memory option of FFlex Options( in the Model Settings) did not support in Shell3, Solid4 and Solid10 elements. In these elements, the option made the slow preprocessing and did not give the good handling memory.

Auto Fit after drawing curve The default value of Auto Fit after drawing curve in Tools of Draw Options changed to False Fixed Problems When Match Solving Stepsize with Report Step was used in the Parameter tab of the Dynamic/Kinematic dialog box, the report step size rounded off the numbers to three demical places. For example, if you use Match Stepsize with Report Stepsize with Report Step, End Time was 1.0 and Step was 60 in the Dynamic Analysis dialog box, the simulation result was outputted in the 0.0, 0.017, 0.033 seconds in V7R3. But, it is outputted in 0.0, 0.01666,0.0333 seconds in V7R4. RecurDyn/ProcessNet Camera Control Data analysis in Plot Animation start/pause/stop function for ProcessNet windows form dialog. Analaysis start/pause/resume/stop function for ProcessNet windows form dialog Multiple DLL s You can use multiple dll s in the Run ProcessNet dialog box. RecurDyn/CoLink Exporting and Importing a CoLink Block You can export and import a CoLink block. PreEvent & PostEvent Pre Event & Post Event was developed. They are written by Ch Script. PreEvent is performed once before simulation and it is made by Ch Script. When you use PreEvent by Ch Script, global variables can be use parameters in the bock of CoLink model. PostEvent is performed once after simulation.

Ch Function Block The Ch Function block in the User Function library was added. You can input desired codes by Ch script of this block. GUI of CoLink New GUI Select All Rotate 90 degrees Font Show/Hide Block Name Show/Hide Drop Shadow Changed Name of GUI Foreground Color Line Color Background Color Block Color Bilateral Symmetry Flip Horizontal Up and down Symmetry Flip Vertical Orthogonal Rotation Rotate -90 degrees Pre/Post Event Ch Function RecurDyn/FFlex Reference Frame for Stress and Strain Results using the FFlex Scope You can define a reference frame for stress and strain results using the FFlex Scope. The FFlex Scope located in the property of FFlex body dialog box. Selection methods for Patch Set You can make the patch set with following methods. Method of continuous surface Method of only front direction patch selection Changed Functions Deformation in Contour Dialog A term, Displacement is used instead of Deformation in Contour Dialog.

RecurDyn/RFlex Tutorial for RFlex In order to help user s understand for RFlex, an example is provided. (It is in the Tutorials page of RecurDyn.) Supported Units Following units are supported for the RFlex Interface. Mass (5): Miligram, Microgram, Nanogram, US ton, Slinch Length (5): Nanometer, Angstrom, Yard, Mil, Microinch Time (3): Nanosecond, Microsecond, Day Force (5): Centinewton, Milinewton, Micronewton, Nanonewton, Poundal Exported Contour Data in Contour Dialog The effect of Reference Node was considered to the only Displacement type when the contour data was exported in RFlex Contour. ANSYS Interface The interface function for ANSYS is supported up to version 12. NX IDEAS Interface The interface function for IDEAS is supported up to NX IDEAS version 6. MSC/Nastran Interface The Interface function for MSC/Nastran is supported from version 2005R1 to 2007R1. Changed Functions Deformation in Contour Dialog A term, Displacement is used instead of Deformation in Contour Dialog. Fixed Problems Modal coordinate (Q), Modal velocity (DQ) and Modal acceleration (DDQ) are defined as non-dimensional variables, but these values were scaled by 1/sqrt(ucf_mass)/ucf_length until V7R3. The ucf_mass and the ucf_length were the unit conversion factor of mass and length from RFI to Modeler defined the unit, respectively.

RecurDyn/ECFD_EHD Asperity Contact Model The asperity contact force model was added to consider the effects of the roughness on the lubrication surfaces. Pressure-viscosity Function The dynamic (absolute) viscocity can be modeled as a function of the pressure by using the pressure-viscoscity coefficient. Post-processing for the Film Thickness and Pressure The useful post processing functions for the film thickness and pressure are supported. RecurDyn/Control Create Output Folder and Output File Name The Create output folder function was added in Simulink Host Mode and Output file name is applied in Simulink Host Mode. RecurDyn/Belt Speed Sensor The Speed Sensor function was added. You can measure the speed for the nearest belt segment or belt element in the range of Speed Sensor by this function. RecurDyn/MTT2D Align Guide Orientation The Align Guide Orientation function was developed. You can decide the contact direction at once for current guides.

Sheet Thickness in the Properties of Sheet Group dialog box Sheet Thickness in the Properties of Sheet Group dialog box is provided as Special Parametric Value Multi-selecting in Guide Converter You can use the Guide Converter function using multi-selecting by drag. RecurDyn/MTT3D Align Guide Orientation The Align Guide Orientation function was developed. You can decide the contact direction at once for current guides. Multi-selecting in Guide Converter You can use the Guide Converter function using multi-selecting by drag. Changed Functions Deformation in Contour Dialog A term, Displacement is used instead of Deformation in Contour Dialog. RecurDyn/Track_HM Multi Clone The multi clone function was added. You can use to make a customized link set by this function. RecurDyn/Track_LM Multi Clone The multi clone function was added. You can use to make a customized link set by this function.

Double Grouser You can use the double grouser as grouser geometric entity.

Copyright 2010 FunctionBay, Inc. All rights reserved User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the Republic of Korea and other countries and is provided under a license agreement that restricts copying, disclosure, and use of such documentation. FunctionBay, Inc. hereby grants to the licensed user the right to make copies in printed form of this documentation if provided on software media, but only for internal/personal use and in accordance with the license agreement under which the applicable software is licensed. Any copy made shall include the FunctionBay, Inc. copyright notice and any other proprietary notice provided by FunctionBay, Inc. This documentation may not be disclosed, transferred, modified, or reduced to any form, including electronic media, or transmitted or made publicly available by any means without the prior written consent of FunctionBay, Inc. and no authorization is granted to make copies for such purpose. Information described herein is furnished for general information only, is subjected to change without notice, and should not be construed as a warranty or commitment by FunctionBay, Inc. FunctionBay, Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear in this document. The software described in this document is provided under written license agreement, contains valuable trade secrets and proprietary information, and is protected by the copyright laws of the Republic of Korea and other countries. UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVIL DAMAGES AND CRIMINAL PROSECUTION. Registered Trademarks of FunctionBay, Inc. or Subsidiary RecurDyn is a registered trademark of FunctionBay, Inc. RecurDyn/Professional, RecurDyn/ Modeler, RecurDyn/Solver, RecurDyn/ProcessNet, RecurDyn/AutoDesign, RecurDyn/CoLink, RecurDyn/ChScript, RecurDyn/FFlex, RecurDyn/RFlex, RecurDyn/Linear, RecurDyn/CATIA Read & Write, RecurDyn/EHD(Steyr), RecurDyn/ECFD_EHD, RecurDyn/Control, RecurDyn/Hydraulic, RecurDyn/MeshInterface, RecurDyn/Bearing, RecurDyn/Driver, RecurDyn/Spring, RecurDyn/Tire, RecurDyn/Belt, RecurDyn/Chain, RecurDyn/Crank, RecurDyn/Engine, RecurDyn/Gear, RecurDyn/HAT, RecurDyn/MTT2D, RecurDyn/MTT3D, RecurDyn/Piston, RecurDyn/Track_HM, RecurDyn/Track_LM, RecurDyn/TimingChain, RecurDyn/Valve are trademarks of FunctionBay, Inc. Third-Party Trademarks Windows and Windows XP are registered trademarks of Microsoft Corporation. ProENGINEER and ProMECHANICA are registered trademarks of PTC Corp. Unigraphics NX and IDEAS are registered trademark of Siemens PLM Software. SolidWorks is a registered trademark of SolidWorks Corp. AutoCAD is a registered trademark of Autodesk, Inc. CADAM and CATIA are registered trademark of Dassault Systems. FLEXlm is a registered trademark of GLOBEtrotter Software, Inc. All other brand or product names are trademarks or registered trademarks of their respective holders. Edition Note This document describes the release information of RecurDyn V7R4. Revision History First Printed, April 2010 Second Revision, July 2010 Third Revision, October 2010