Technical Training 2015 DentalAcademyUS@sirona.com page 1
Face to Face Advanced IMAGING Training Agenda (4 days) (Charlotte only, 3-6 Students) Day 1: Pickup at Hotel at 8:30 AM. Sidexis XG, Sidexis 4 and 3D software: Advanced settings and troubleshooting of Sidexis SW installations Advanced Database manipulations Day 2: 2D and 3D hardware: Continued Software installation of 3D software components Network troubleshooting Archiving, CEREC Integration ssi, dxd, SyncService, Multiple offices Day 3: Advanced settings, troubleshooting and repair of Pan/Ceph/3D units Installation of Facescanner and optional 3D software (SiCat Suite) Introduction to 3D applications Day 4: Advance repair of 2D and 3D x-ray systems Complete disassembly of 2D/3D unit Legacy products Test Transport to Airport at 3:30 PM. (30 min) DentalAcademyUS@sirona.com page 8
2015 Imaging Technical Training Month Basic Charlotte Advanced Charlotte Basic Field Location February Not available 17-20 10-13 Las Vegas March 3-6 and 17-20 24-27 10-13 Ft Wayne, In June 2-5 23-26 16-19 Kansas City July 7-10 21-24 14-17 Albany, NY August 11-14 and 25-28 18-21 4-7 Dallas September 1-4 22-25 15-18 Birmingham, AL October 6-9 and 27-30 13-16 20-23 Concord, CA November Not available 10-13 17-20 Orlando Prerequisites Basic X-Ray class: Participants must have installed and worked (repair & troubleshooting) on intraoral, panoramic and cephalometric X-ray equipment and must have basic* computer knowledge. Participants must have passed the Basic Imaging Prerequisite class online at the Sirona Academy website ***. Prerequisites Advanced X-Ray class: Participants must have installed and worked (repair & troubleshooting) on Sirona intraoral, panoramic and Cephalometric X-ray equipment and have successfully participated in the Sirona Basic X-Ray class less than 5 years ago and must have solid** computer knowledge. Participants must have passed the Advanced Imaging Prerequisite class online at the Sirona Academy website ***. * Basic computer knowledge: Must be familiar with basic operations of the Windows Operating system like using the mouse, finding, copying and editing files. ** Advanced computer knowledge: Must be familiar with advanced operations of the Windows Operating system like basic networking, determining and assigning TCP/IP addresses and user rights. *** Technicians must be signed up to the Sirona Academy (USA) site and will be assigned the appropriate course material. It is recommended to sign up several weeks before the class. The assignments will take less than 1.5 hour total. The prerequisite course is mandatory for attending the class room training. DentalAcademyUS@sirona.com page 9
Sirona Academy USA Training offers (CAD/CAM) for the year 2015: (Attendance Prerequisites please see below) Basic CAD/CAM Training Agenda (4 days) (Charlotte and Field training, 6-12 students) Day 1: Pickup at Hotel at 8:30 AM. Intro to CAD/CAM Acquisition Installation and Service Installation of Cerec AC and Milling unit. AC calibration, networking and testing. Backing up data, image restore and software updates. Day2: MCXL calibration and service software. MCXL hardware tour for replacing spindle motors and stepping motors. Day Three: Cerec software tour to create a restoration to be milled. The different configurations of acquisition units and milling units. Day Four: PM registration procedure and Cerec Support site. ineos X5 installation and calibration. Test Transport to Airport at 3:30 PM. (30 min) DentalAcademyUS@sirona.com page 1 0
Advanced CAD/CAM Training Agenda (4 days) (Charlotte only, 3-6 students) Day One: Pickup at Hotel at 8:30 AM. Acquisition unit setup and milling unit communication. AC diagnostic kit checkout and usage. Cerec software process. Acquisition advanced troubleshooting. Day Two: Detailed MC, MCX, MCXL hardware tour. Milling Unit advanced troubleshooting. Day Three: infire HTC Speed, Apollo, ineos X5 and inlab X5 setup and usage. Day Four: Debugging of Acquisition units and Milling units. Special request legacy units. Test Transport to Airport at 3:30 PM. (30 min) DentalAcademyUS@sirona.com page 1 1
2015 CAD/CAM Technical Training Month Basic Charlotte Advanced Charlotte Basic Field Location February 3-6 17-20 10-13 Dallas March 3-6 24-27 10-13 Birmingham, AL June 2-5 23-26 16-19 Orlando July 7-10 21-24 14-17 Concord, CA August 11-14 and 25-28 18-21 4-7 Ft Wayne, IN September 1-4 22-25 15-18 Albany, NY October 27-30 13-16 6-9 Las Vegas November Not available 10-13 17-20 Kansas City Prerequisites Basic CAD/CAM class: Participants must have installed and worked on Sirona CAD/CAM equipment and must have basic* computer knowledge. Participants must have passed the Basic CAD/CAM Prerequisite class online at the Sirona Academy website ***. Prerequisites Advanced CAD/CAM class: Participants must have installed and worked (repair & troubleshooting) on Sirona CAD/CAM equipment and have successfully participated in the Sirona Basic CAD/CAM class less than 5 years ago and must have solid** computer knowledge. Participants must have passed the Advanced CAD/CAM Prerequisite class online at the Sirona Academy website ***. * Basic computer knowledge: Must be familiar with basic operations of the Windows Operating system like using the mouse, finding, copying and editing files. ** Advanced computer knowledge: Must be familiar with advanced operations of the Windows Operating system like basic networking, determining and assigning TCP/IP addresses and user rights. *** Technicians must be signed up to the Sirona Academy (USA) site and will be assigned the appropriate course material. It is recommended to sign up several weeks before the class. The assignments will take less than 1.5 hour total. The prerequisite course is mandatory for attending the class room training. DentalAcademyUS@sirona.com page 1 2