Release: 1 UEE62111 Advanced Diploma of Engineering Technology - Electrical
UEE62111 Advanced Diploma of Engineering Technology - Electrical Date this document was generated: 27 May 12 UEE62111 Advanced Diploma of Engineering Technology - Electrical Modification History Not applicable. Description Scope This qualification provides enabling competencies to design and validate/evaluate electrical equipment and systems and provide technical advice/sales. Pathways Information Not applicable. Licensing/Regulatory Information Not applicable. Entry Requirements Not applicable. Employability Skills Summary Not applicable. Approved Page 2 of 12 Commonwealth of Australia, 12 EE-Oz Training Standards
UEE62111 Advanced Diploma of Engineering Technology - Electrical Date this document was generated: 27 May 12 Packaging Rules Completion requirements The requirements for granting this qualification will be met when competency is demonstrated and achieved for: All the Core competency standard units, defined in the Core Competency Standard Units table below and A combination of Elective competency standard units to achieve a total weighting of 7 points in accordance with the Elective Competency Standard Units table below. Core Competency Standard Units All Core competency standard units to be achieved Weighting Points UEENEED104A Use software for engineering applications UEENEEE011C Manage risk in electrotechnology activities UEENEEE015B Develop design briefs for electrotechnology projects UEENEEE071B Write specifications for electrical engineering projects UEENEEE0A UEENEEE081A UEENEEE082A UEENEEE083A UEENEEE101A UEENEEE102A Apply industry and community standards to engineering activities Apply material science to solving electrotechnology engineering Apply physics to solving electrotechnology engineering Establish and follow a competency development plan in an electrotechnology engineering discipline Apply Occupational Health and Safety regulations, codes and practices in the workplace Fabricate, assemble and dismantle utilities industry components 1 UEENEEE104A Solve in d.c. circuits UEENEEE107A UEENEEE117A Use drawings, diagrams, schedules, standards, codes and specifications Implement and monitor energy sector OHS policies and procedures Approved Page 3 of 12 Commonwealth of Australia, 12 EE-Oz Training Standards
UEE62111 Advanced Diploma of Engineering Technology - Electrical Date this document was generated: 27 May 12 UEENEEE124A Compile and produce an energy sector detailed report UEENEEE125A UEENEEE126A UEENEEE137A UEENEEG006A UEENEEG033A UEENEEG063A UEENEEG101A Provide solutions to complex multiple path circuits Provide solutions to basic engineering computational Document and apply measures to control OHS risks associated with electrotechnology work Solve in single and three phase low voltage machines Solve in single and three phase low voltage electrical apparatus and circuits Arrange circuits, control and protection for general electrical installations Solve in electromagnetic devices and related circuits UEENEEG102A Solve in low voltage a.c. circuits UEENEEG106A UEENEEG107A UEENEEG149A Terminate cables, cords and accessories for low voltage circuits Select wiring systems and cables for low voltage general electrical installations Provide engineering solutions to in complex polyphase power circuits UEENEEG169A Manage large electrical projects UEENEEG170A Plan large electrical projects UEENEEK132A Develop energy sector strategies to address environmental and sustainability issues Total points in core 14 Elective Competency Standard Units Complete Elective units to achieve a total of weighting of 7 points from the following groups: Approved Page 4 of 12 Commonwealth of Australia, 12 EE-Oz Training Standards
UEE62111 Advanced Diploma of Engineering Technology - Electrical Date this document was generated: 27 May 12 Group Minimum points Maximum points A Imported and Common Elective Units Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 6. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. 0 3 B Qualification Elective Units 0 1 C Qualification Elective Units 0 2 D Qualification Elective Units 0 2 E Qualification Elective Units You may select all your elective units from this Group 0 7 Group A Imported and Common Elective Units You may complete units to a maximum weighting of 3 Weighting Points BSBINM501A Manage an information or knowledge management system 50 BSBINN502A Build and sustain an innovative work environment 50 BSBMGT502B Manage people performance 70 BSBMGT516C Facilitate continuous improvement BSBWOR502B Ensure team effectiveness UEENEEC001B Maintain documentation UEENEEC002B Source and purchase material/parts for installation or service jobs UEENEEC003B Provide quotations for installation or service jobs UEENEEC010B Deliver a service to customers UEENEED101A Use basic computer applications relevant to a energy sector workplace Approved Page 5 of 12 Commonwealth of Australia, 12 EE-Oz Training Standards
UEE62111 Advanced Diploma of Engineering Technology - Electrical Date this document was generated: 27 May 12 UEENEEE0B Provide basic instruction in the use of electrotechnology apparatus Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 6. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. Up to 3 points Note: For further information see Application of the NQC Flexibility Formula, UEE11 Electrotechnology Training Package, Version 1, Volume 1 Qualification Framework Approved Page 6 of 12 Commonwealth of Australia, 12 EE-Oz Training Standards
UEE62111 Advanced Diploma of Engineering Technology - Electrical Date this document was generated: 27 May 12 Group B Qualification Elective Units You may complete units to a maximum weighting of 1 Weighting Points UEENEEE105A Fix and secure electrotechnology equipment UEENEEE121A Plan an residential integrated cabling system UEENEEE190A UEENEEE191A UEENEEF102A UEENEEF104A Prepare engineering drawings using manual drafting and CAD for electrotechnology/utilities applications Prepare electrotechnology/utilities drawings using manual drafting and CAD equipment and software Install and maintain cabling for multiple access to telecommunication services Install and modify performance data communication copper cabling 1 UEENEEG111A Carry out repairs to electrical apparatus UEENEEG1A UEENEEG181A UEENEEG182A UEENEEG183A UEENEEH102A Select and arrange circuits and equipment for special electrical installations Provide advice on effective and energy efficient lighting products Supply effective and efficient lighting products for domestic and small commercial applications Provide advice on the application of energy efficient lighting for ambient and aesthetic effect Repair basic electronic apparatus faults by replacement of components UEENEEH111A Troubleshoot single phase input d.c. power supplies UEENEEH150A UEENEEI101A UEENEEI116A Assemble and set up basic wired and wireless security systems Use instrumentation drawings, specifications, standards and equipment manuals Enter and verify operating instructions in microprocessor equipped devices Approved Page 7 of 12 Commonwealth of Australia, 12 EE-Oz Training Standards
UEE62111 Advanced Diploma of Engineering Technology - Electrical Date this document was generated: 27 May 12 UEENEEI138A Provide solutions to extra low voltage (ELV) electro-pneumatic control systems and drives UEENEEI1A Plan the electrical installation of integrated systems UEENEEI141A Develop electrical integrated systems UEENEEI150A UEENEEK125A Develop, enter and verify discrete control programs for programmable controllers Solve basic in photovoltaic energy apparatus and systems Group C Qualification Elective Units You may complete units to a maximum weighting of 2 Weighting Points UEENEEC005B Estimate electrotechnology projects UEENEEG125A Plan LV electrical installations with a demand up to 0A per phase UEENEEG128A Plan layouts for electrical switchboards and control panels UEENEEG179A Develop detailed electrical drawings UEENEEG184A Provide photometric data for illumination system design UEENEEG185A UEENEEG186A UEENEEG188A UEENEEI142A UEENEEI143A UEENEEI144A Select effective and efficient light sources and luminaires for given locations and designs Design effective and efficient lighting for residential and commercial buildings Prepare quotations for the supply of effective and efficient lighting products for lighting projects Develop an electrical integrated system interface for access through a touch screen Develop access control of electrical integrated systems using logic-based programming tools Develop interfaces for multiple access methods to monitor, schedule and control an electrical integrated system UEENEEI151A Develop, enter and verify programs for industrial control Approved Page 8 of 12 Commonwealth of Australia, 12 EE-Oz Training Standards
UEE62111 Advanced Diploma of Engineering Technology - Electrical Date this document was generated: 27 May 12 systems using high level instructions UEENEEI152A Develop, enter and verify programs in Supervisory Control and Data Acquisition systems UEENEEI155A Develop structured programs to control external devices UEENEEK135A Design photovoltaic grid connected power supply systems Group D Qualification Elective Units You may complete units to a maximum weighting of 2 Weighting Points UEENEEC006B Prepare tender submissions for electrotechnology projects UEENEEE110A Develop and implement energy sector maintenance programs UEENEED147A Develop energy sector directory services UEENEEG127A Design LV electrical installations with a demand greater than 0 A per phase UEENEEG131A Evaluate performance of LV electrical apparatus UEENEEG1A UEENEEG187A Develop detailed and complex drawings for electrical systems using CAD systems Design effective and efficient lighting for public, open and sports areas UEENEEI145A Diagnose and rectify faults in a.c. motor drive systems UEENEEI146A Diagnose and rectify faults in d.c. motor drive systems UEENEEI147A Diagnose and rectify faults in servo drive systems UEENEEI156A Develop and test code for microcontroller devices UEENEEI157A Configure and maintain industrial control system networks UEENEEK129A Design renewable energy (RE) heating systems 1 UEENEEK131A Design wind energy conversion systems (WECS) rated to 10 kw. UEENEEK138A Design micro-hydro power systems Approved Page 9 of 12 Commonwealth of Australia, 12 EE-Oz Training Standards
UEE62111 Advanced Diploma of Engineering Technology - Electrical Date this document was generated: 27 May 12 Group E Qualification Elective Units You must complete units to a minimum weighting of 0 You may select all your elective units from this Group Weighting Points UEENEEC007B Manage contract variations UEENEEE078B UEENEEE127A Contribute to risk management in electrotechnology systems Use advanced computational processes to provide solutions to engineering UEENEEE128A Develop engineering solutions to photonic UEENEED149A UEENEEE1A UEENEEE161A Develop energy sector computer network applications infrastructure Provide engineering solutions for uses of materials and thermodynamic effects Analyse static and dynamic parameters of electrotechnology/utilities equipment UEENEEE162A Select drive components for equipment design UEENEEE163A UEENEEE164A Analyse materials for suitability in electrotechnology/utilities equipment Design electrical machine drives and production layout plans UEENEEG130A Design electrical switchboards rated for high fault levels UEENEEG143A UEENEEG144A UEENEEG145A Develop engineering solutions for synchronous machine Develop engineering solutions for direct current machine Develop engineering solutions for induction machine UEENEEG1A Evaluate performance of LV electrical machines UEENEEG161A Design and develop modifications for electrical machines UEENEEH147A Assess compliance of electronic apparatus Approved Page 10 of 12 Commonwealth of Australia, 12 EE-Oz Training Standards
UEE62111 Advanced Diploma of Engineering Technology - Electrical Date this document was generated: 27 May 12 UEENEEH184A Modify DSP based sub-systems UEENEEH185A Design a signal-conditioning subsystem UEENEEH188A Design and develop electronics/computer systems projects UEENEEI123A Design electronic control and instrumentation systems UEENEEI128A Set up controls on complex fluid systems UEENEEI129A UEENEEI130A UEENEEI153A Set up electronically controlled mechanically operated complex systems Set up electronically controlled robotically operated complex systems Design and configure Human-Machine Interface (HMI) networks UEENEEI154A Design a computer based control system 1 UEENEEK133A Design hybrid renewable power systems UEENEEK139A Design stand-alone renewable energy power systems UEENEEK1A UEENEEK146A UEENEEK151A Develop engineering solutions to renewable energy Design energy management controls systems for electrical installations in buildings Develop engineering strategies for energy reduction in buildings UEENEEM052A Classify hazardous areas gas atmospheres UEENEEM053A Classify hazardous areas dust atmospheres UEENEEM057A UEENEEM058A UEENEEM059A UEENEEM068A Design explosion-protected electrical systems and installations gas atmospheres Design explosion-protected electrical systems and installations dust atmospheres Design explosion-protected electrical systems and installations pressurisation Assess the fitness-for-purpose of hazardous areas explosion-protected equipment gas atmospheres Approved Page 11 of 12 Commonwealth of Australia, 12 EE-Oz Training Standards
UEE62111 Advanced Diploma of Engineering Technology - Electrical Date this document was generated: 27 May 12 UEENEEM075A Design explosion-protected electrical systems Coal mining UEENEEM079A Design of gas detection systems and installations Note: 1. Pre-requisite pathways shall be identified and met for all elective units selected. 2. In selecting elective units considerations to career planning advice should be given to units that form part of a pre-requisite pathway for the progression to achieve particular competencies or qualification at a higher level. 3. Registered training organisations shall also provide information related to the relevant pathway(s) that may be taken to achieve paraprofessional status ("associate membership") with a professional engineering membership organisation. END OF QUALIFICATION Custom Content Section Not applicable. Approved Page 12 of 12 Commonwealth of Australia, 12 EE-Oz Training Standards