Database Configuration Guide

Entrust IdentityGuard 8.1 Database Configuration Guide Document issue: 1.0 Date of Issue: June 2006

Copyright 2006 Entrust. All rights reserved. Entrust is a trademark or a registered trademark of Entrust, Inc. in certain countries. All Entrust product names and logos are trademarks or registered trademarks of Entrust, Inc. in certain countries. All other company and product names and logos are trademarks or registered trademarks of their respective owners in certain countries. This information is subject to change as Entrust reserves the right to, without notice, make changes to its products as progress in engineering or manufacturing methods or circumstances may warrant. Export and/or import of cryptographic products may be restricted by various regulations in various countries. Export and/or import permits may be required. 2 Entrust IdentityGuard 8.1 Database Configuration Guide

Table of contents About this guide..............................................3 About Entrust IdentityGuard........................................... 4 Database considerations.............................................. 5 Setting up the JDBC driver......................................... 5 Estimating database size........................................... 5 Backing up the database.......................................... 6 Documentation conventions........................................... 7 Note and Attention text........................................... 7 Related documentation............................................... 8 Obtaining documentation............................................. 9 Documentation feedback.......................................... 9 Obtaining technical assistance........................................ 10 Technical support............................................... 10 Professional Services............................................ 11 CHAPTER 1 Configuring a DB2 database....................................13 Setting up the DB2 database......................................... 14 Preparing the DB2 database for installation........................... 14 Installing the Entrust IdentityGuard schema file for DB2.................. 14 Installing the JDBC driver files..................................... 15 Gathering your configuration data..................................... 16 CHAPTER 2 Configuring an SQL Server database..............................17 Setting up the SQL Server database.................................... 18 Preparing the SQL Server database for installation...................... 18 Installing the Entrust IdentityGuard schema file for SQL Server............ 18 Installing the JDBC driver......................................... 19

Gathering your configuration data..................................... 20 CHAPTER 3 Configuring an Oracle database..................................21 Setting up the Oracle database........................................ 22 Preparing the Oracle database for installation......................... 22 Installing the Entrust IdentityGuard schema file for Oracle................ 23 Installing the JDBC driver......................................... 23 Gathering your configuration data..................................... 25 Index......................................................27 2 Entrust IdentityGuard 8.1 Database Configuration Guide Document issue: 1.0

About this guide This guide provides an overview of how to configure Entrust IdentityGuard 8.1 to operate with the IBM DB2 Universal database, Microsoft SQL Server, and Oracle database. This chapter includes the following sections: About Entrust IdentityGuard on page 4 Database considerations on page 5 Documentation conventions on page 7 Related documentation on page 8 Obtaining documentation on page 9 Obtaining technical assistance on page 10 3

About Entrust IdentityGuard Installing Entrust IdentityGuard 8.1 allows you to add the benefits of multifactor authentication to your primary authentication method. Entrust IdentityGuard 8.1 provides multifactor authentication to help organizations counter identity theft by making it more difficult for attackers to steal users online identities. It addresses the real-world demands for strong authentication, making it easier to use while helping to reduce deployment and management costs. Note: You must follow the instructions in this guide before you install Entrust IdentityGuard. For information about installing and configuring Entrust IdentityGuard 8.1, refer to the Entrust IdentityGuard Installation and Guide. 4 Entrust IdentityGuard 8.1 Database Configuration Guide Document issue: 1.0

Database considerations This section provides information that applies to all databases supported by Entrust IdentityGuard: Setting up the JDBC driver on page 5 Estimating database size on page 5 Backing up the database on page 6 Setting up the JDBC driver Entrust IdentityGuard communicates with the database using Java database connectivity (JDBC), which is a standard SQL database interface. Keep these points in mind when setting up JDBC: Make sure you obtain and install the appropriate version of the JDBC driver that supports connectivity to your Entrust IdentityGuard database. Install the driver in a location on the Entrust IdentityGuard Server so that Entrust IdentityGuard can find the JAR files during configuration. Take note of that location, as you must provide it when you configure Entrust IdentityGuard later. Estimating database size No two databases will be the same. The number of policies, groups, administrators and users will vary as will the attributes assigned to each and the authentication methods used. You can calculate the approximate disk space requirements of your Entrust IdentityGuard database using the applicable values below. Table 1: Database disk space Information type Table names Data requirement Global policy globalpolicy 0.5 KB. Policies policy, policy_cardspec, policy_passwordpolicy policy_temppinspec, policy_userspec 2.5 KB per policy spread across the five tables. Roles roles 1.5 KB per role. About this guide 5

Table 1: Database disk space Information type Table names Data requirement Groups groups 0.5 KB per group. Group Lists grouplists 0.5 KB per group list. Users Administrators Preproduction cards Unassigned tokens users, cards, tokens, aliases, challenges admin, admin_role, admin_grouplist preproduced_cards unassigned_tokens 1.5 KB minimum per user with one 5 by 10 card, one temporary PIN and one alias. Most data is in the users table. Other tables contain index entries. 0.5 KB per user for each additional 5 by 10 card. 0.5 KB per user if tokens are used. 0.5 KB per user when card usage tracking is enabled (for example, least used challenge). More space is needed for comment attributes, extra aliases, and knowledge-based authentication. Up to 1 MB per user (controlled by policy) when authentication secrets are included. 0.5 KB per administrator. Most data is in the admin table. Other tables contain index entries. 0.5 KB per preproduced card. 0.5 KB per unassigned token. For information on creating policies, groups, group lists, administrators and users, refer to the Entrust IdentityGuard Administration Guide. Backing up the database Your database stores all your Entrust IdentityGuard user, card, token, and PIN data. Without backup, any database failure can result in the loss of user information. This might require that you reissue Entrust IdentityGuard cards or tokens. Attention: Back up your database on a regular basis. 6 Entrust IdentityGuard 8.1 Database Configuration Guide Document issue: 1.0

Documentation conventions Following are typographic conventions which may appear in this guide: Table 2: Typographic conventions Convention Purpose Example Bold text (other than headings) Italicized text Blue text Underlined blue text Courier type Angle brackets < > Square brackets [courier type] Indicates graphical user interface elements and wizards. Used for book or document titles. Used for hyperlinks to other sections in the document. Used for Web links. Indicates installation paths, file names, Windows registry keys, commands, and text you must enter. Indicates variables (text you must replace with your organization s correct values). Indicates optional parameters. Click Next. Entrust TruePass 7.0 Deployment Guide Entrust TruePass supports the use of many types of digital ID. For more information, visit our Web site at www.entrust.com. Use the entrust-configuration.xml file to change certain options for Verification Server. By default, the entrust.ini file is located in <install_path>/conf/security/entrust. ini. dsa passwd [-ldap] Note and Attention text Throughout this guide there are paragraphs set off by ruled lines above and below the text. These paragraphs provide key information with two levels of importance, as shown below. Note: Information to help you maximize the benefits of your Entrust product. Attention: Issues that, if ignored, may seriously affect performance, security, or the operation of your Entrust product. About this guide 7

Related documentation Entrust IdentityGuard is supported by a complete documentation suite: For instructions on installing and configuring Entrust IdentityGuard Server, see the Entrust IdentityGuard Installation Guide. For instructions on administering Entrust IdentityGuard users and groups, see the Entrust IdentityGuard Administration Guide. For information on deploying Entrust IdentityGuard, refer to the Entrust IdentityGuard Deployment Guide. For information on configuring Entrust IdentityGuard to work with a supported LDAP repository Active Directory, Active Directory Application Mode, Critical Path InJoin Directory, IBM Tivoli Directory, Novell edirectory, or Sun ONE Directory see the Entrust IdentityGuard Directory Configuration Guide. For information on configuring Entrust IdentityGuard to work with a supported database IBM DB2 Universal Database, Microsoft SQL Server, or Oracle Database see the Entrust IdentityGuard Database Configuration Guide. For information on Entrust IdentityGuard error messages, see the Entrust IdentityGuard Error Messages. For information on new features, limitations and known issues in the latest release, see the Entrust IdentityGuard Release Notes. For information on integrating the authentication and administration processes of your applications with Entrust IdentityGuard, see the Entrust IdentityGuard Programming Guide that applies to your development platform (either Java Platform or C#). For Entrust IdentityGuard product information and a data sheet, go to http://www.entrust.com/strong-authentication/identityguard/index.htm. For information on identity theft protection seminars, go to http://www.entrust.com/events/identityguard.htm. 8 Entrust IdentityGuard 8.1 Database Configuration Guide Document issue: 1.0

Obtaining documentation Entrust product documentation, white papers, technical integration guides, technical notes, and a comprehensive Knowledge Base are available through Entrust TrustedCare Online. If you are registered for our support programs, you can use our Web-based Entrust TrustedCare Online support services at: https://www.entrust.com/trustedcare Documentation feedback You can rate and provide feedback about Entrust product documentation by completing the online feedback form. You can access this form by clicking the link located in the footer of Entrust s PDF documents (see bottom of this page). following this link: http://www.entrust.com/products/feedback/index.cfm Feedback concerning documentation can also be directed to the Customer Support email address: support@entrust.com About this guide 9

Obtaining technical assistance Entrust recognizes the importance of providing quick and easy access to our support resources. The following subsections provide details about the technical support and professional services available to you. Technical support Entrust offers a variety of technical support programs to help you keep Entrust products up and running. To learn more about the full range of Entrust technical support services, visit our Web site at: http://www.entrust.com/ If you are registered for our support programs, you can use our Web-based support services. Entrust TrustedCare Online offers technical resources including Entrust product documentation, white papers and technical notes, and a comprehensive Knowledge Base at: https://www.entrust.com/trustedcare If you contact Entrust Customer Support, please provide as much of the following information as possible: your contact information product name, version, and operating system information your deployment scenario description of the problem copy of log files containing error messages description of conditions under which the error occurred description of troubleshooting activities you have already performed Telephone numbers For support assistance by telephone call one of the numbers below: 1-877-754-7878 in North America 1-613-270-3700 outside North America Email address The email address for Customer Support is: support@entrust.com 10 Entrust IdentityGuard 8.1 Database Configuration Guide Document issue: 1.0

Professional Services The Entrust team assists e-businesses around the world to deploy and maintain secure transactions and communications with their partners, customers, suppliers and employees. We offer a full range of professional services to deploy our e-business solutions successfully for wired and wireless networks, including planning and design, installation, system integration, deployment support, and custom software development. Whether you choose to operate your Entrust solution in-house or subscribe to hosted services, Entrust Professional Services will design and implement the right solution for your e-business needs. For more information about Entrust Professional Services please visit our Web site at: http://www.entrust.com About this guide 11

12 Entrust IdentityGuard 8.1 Database Configuration Guide Document issue: 1.0

Chapter 1 Configuring a DB2 database The DB2 database administrator must be involved in planning and carrying out specific tasks in order to configure Entrust IdentityGuard 8.1 to work with a DB2 database. This chapter includes the following sections: Setting up the DB2 database on page 14. Gathering your configuration data on page 16. 13

Setting up the DB2 database Before you install Entrust IdentityGuard, you must prepare the DB2 database. This section includes: Preparing the DB2 database for installation on page 14 Installing the Entrust IdentityGuard schema file for DB2 on page 14 Installing the JDBC driver files on page 15 Remember to complete the procedures in this chapter before you install Entrust IdentityGuard. Note: When preparing a DB2 database for Entrust IdentityGuard, keep in mind the languages that you need to support. For international English or non-english environments, consult your DB2 documentation for more information on setting the language variable. Preparing the DB2 database for installation Create a separate database for Entrust IdentityGuard data. Make sure it has the correct language setting. Here s one example: db2 create database entrust using codeset UTF-8 TERRITORY US Also create a database user login account for use by Entrust IdentityGuard. You should provide sufficient privileges so that this user can administer and own the Entrust IdentityGuard database schema and data, including the database tables. Installing the Entrust IdentityGuard schema file for DB2 Once you prepare the database, create the Entrust IdentityGuard database tables using the SQL command files included in the Entrust IdentityGuard installation package. Extract the applicable archive file for your operating system. Refer to the Entrust IdentityGuard Installation Guide for details. The schema files for DB2 are available under the IG_81/sql directory included with the Entrust IdentityGuard installation package. You can access them without having to install Entrust IdentityGuard. Run the applicable schema file as the newly created Entrust IdentityGuard database user. There are three schema files to choose from: 14 Entrust IdentityGuard 8.1 Database Administration Guide Document issue: 1.0

If you are installing a new version of Entrust IdentityGuard, use the file db2_v81_schema.sql. If you are upgrading from Entrust IdentityGuard 8.0, use the file db2_v80_to_v81_upgrade.sql. If you are upgrading from Entrust IdentityGuard 7.2, use the file db2_v7x_to_v81_upgrade.sql. Before you run the selected schema file, you must edit it for your installation. To edit and run the SQL file 1 Copy the schema file to a working directory on the database server. 2 Open the schema file in an editor and insert lines like the following at the top of the file: connect to <igdb> user <igadmin> using <igpass>; set schema <schemaname>; Where: igdb is the name of the DB2 database created for Entrust IdentityGuard igadmin is the Entrust IdentityGuard database user igpass is the Entrust IdentityGuard database password schemaname is name of the schema 3 Save and run the copied schema file on the database server. Here s an example using the DB2 command: db2 -tf <schema-file> Where: schema-file is the full path name of the schema file you edited Installing the JDBC driver files Locate the correct JDBC driver files. These are provided with your database software or from a 3rd-party vendor. Entrust IdentityGuard supports DB2 using the DB2 JDBC universal driver files (db2jcc.jar, db2jcc_javax.jar, and db2jcc_license_cu.jar). This is a platform-independent, type-4 driver that uses Java to connect directly to DB2. It is a two-tier, pure Java JDBC driver that allows a Java client to communicate with DB2 servers using the DRDA protocol. The driver does not require you to have DB2 client software installed. Place the JAR files in a location on the Entrust IdentityGuard Server where the person installing Entrust IdentityGuard can find them during configuration. Configuring a DB2 database 15

Gathering your configuration data You can now install Entrust IdentityGuard. This section describes how to prepare for this installation. Refer to the Entrust IdentityGuard Installation Guide for complete installation instructions. As part of the Entrust IdentityGuard installation procedure, the installer will present questions or options about the database and JDBC files. Make a note of the information requirements in the following table. Table 3: Configuration data Configuration data JDBC driver JAR file names JDBC driver class name Database URL DB2 database user DB2 database user password DB2 database schema name Description You will be asked for the names of the JDBC files during installation. They are: db2jcc.jar, db2jcc_javax.jar, and db2jcc_license_cu.jar. Enter db2jcc.jar first. (In the Windows installer, enter the other two JAR files as additional files.) You will be asked for the JDBC driver class you are using. It is: com.ibm.db2.jcc.db2driver. Each JDBC driver defines its own syntax for the URL. Consult the driver documentation for details. For the DB2 type-4 driver, the URL will look like this: jdbc:db2://<dbhost>:<dbport>/<mydbname> Where: dbhost is the name of the server that hosts the DB2 database dbport is the port number the database server listens to mydbname is the name of the database created for Entrust IdentityGuard Provide the name or ID of the account through which Entrust IdentityGuard logs in and accesses your DB2 database. Entrust IdentityGuard uses this name together with the database user password to log in to your database. Specify the password assigned to the DB2 database user. Entrust IdentityGuard uses this password together with the database user to log in to your database. This is the name used when you edited the Entrust IdentityGuard SQL schema file. 16 Entrust IdentityGuard 8.1 Database Administration Guide Document issue: 1.0

Chapter 2 Configuring an SQL Server database The SQL Server database administrator must be involved in planning and carrying out specific tasks in order to configure Entrust IdentityGuard 8.1 to work with a SQL Server database. This chapter includes the following sections: Setting up the SQL Server database on page 18. Gathering your configuration data on page 20. 17

Setting up the SQL Server database Before you install Entrust IdentityGuard, you must prepare the SQL Server database. This section includes: Preparing the SQL Server database for installation on page 18 Installing the Entrust IdentityGuard schema file for SQL Server on page 18 Installing the JDBC driver on page 19 Remember to complete the procedures in this configuration guide before you install Entrust IdentityGuard. Note: When preparing an SQL Server database for Entrust IdentityGuard, keep in mind the languages that you need to support. For international English or non-english environments, consult your SQL Server documentation for more information on setting the language variable. Preparing the SQL Server database for installation Create a separate database for Entrust IdentityGuard data. Also create an SQL Server database user login account for use by Entrust IdentityGuard. You should provide sufficient privileges so that this user can administer and own the Entrust IdentityGuard database schema and data, including the database tables. Installing the Entrust IdentityGuard schema file for SQL Server Once you prepare the database, create the Entrust IdentityGuard database tables using the applicable command file included in the Entrust IdentityGuard installation package. Extract the applicable archive file for your operating system. Refer to the Entrust IdentityGuard Installation Guide for details. The schema files for SQL Server are available under the IG_81/sql directory included with the Entrust IdentityGuard installation package. You can access them without having to install Entrust IdentityGuard. Run the applicable schema file as the newly created Entrust IdentityGuard database user. There are two schema files to choose from: 18 Entrust IdentityGuard 8.1 Database Administration Guide Document issue: 1.0

If you are installing a new version of Entrust IdentityGuard, use the file sqlserver_v81_schema.sql. If you are upgrading from Entrust IdentityGuard 8.0, use the file sqlserver_v80_to_v81_upgrade.sql. Before you run the schema file, you must edit it for your installation. To edit and run the SQL file 1 Copy the applicable schema file to a working directory on the database server. 2 Open it in an editor and insert a line like the following at the top of the file: use <dbname>; Where: dbname is the name of the database created for Entrust IdentityGuard 3 Save and run the schema file on the database server. There are several ways to run it. Here s one example: osql -U <igadmin> -P <igpass> -i <schema-file> Where: igadmin is the database login account created for Entrust IdentityGuard igpass is the Entrust IdentityGuard database password schema-file is the full path name to the edited version of the schema file Installing the JDBC driver Locate the correct JDBC driver files. These are provided with your database software or from a 3rd-party vendor. Entrust IdentityGuard supports the Microsoft SQL Server 2000 Driver for JDBC (mssqlserver.jar, msbase.jar, and msutil.jar). This is a platform-independent, type-4 driver that uses Java to connect directly to SQL Server. The driver does not require you to have SQL Server client software installed. Place the JAR files in a location on the Entrust IdentityGuard Server where the person installing Entrust IdentityGuard can find them during configuration. Configuring an SQL Server database 19

Gathering your configuration data You can now install Entrust IdentityGuard. This section describes how to prepare for this installation. Refer to the Entrust IdentityGuard Installation Guide for complete installation instructions. As part of the Entrust IdentityGuard installation procedure, the installer will present questions or options about the database and JDBC files. Make a note of the information requirements in the following table. Table 4: Configuration data Configuration data JDBC driver JAR file name JDBC driver class name Database URL SQL Server database user SQL Server database user password SQL Server database schema name Description You will be asked for the names of the JDBC files during installation. They are: mssqlserver.jar, msbase.jar, and msutil.jar. Enter mssqlserver.jar first. (In the Windows installer, enter the other two JAR files as additional files.) You will be asked for the name of the SQL Server JDBC driver class you are using. It is: com.microsoft.jdbc.sqlserver.sqlserverdriver. Each JDBC driver defines its own syntax for the URL. Consult the driver documentation for details. For the SQL Server thin client driver, the URL will look like this: jdbc:microsoft:sqlserver://<dbhost>:<dbport>; databasename=<dbname>;selectmethod=cursor; Where: dbhost is the name of the server that hosts the SQL Server database dbport is the database server port number, for example: 1433 dbname is the name of your SQL Server database Provide the name or ID of the account through which Entrust IdentityGuard logs in and accesses your SQL Server database. Entrust IdentityGuard uses this name together with the database user password to log in to your database. Specify the password assigned to the SQL Server database user. Entrust IdentityGuard uses this password together with the database user to log in to your database. Specify your database schema name. It is dbo by default. 20 Entrust IdentityGuard 8.1 Database Administration Guide Document issue: 1.0

Chapter 3 Configuring an Oracle database The Oracle database administrator must be involved in planning and carrying out specific tasks in order to configure Entrust IdentityGuard 8.1 to work with an Oracle database. This chapter includes the following sections: Setting up the Oracle database on page 22. Gathering your configuration data on page 25. 21

Setting up the Oracle database Before you install Entrust IdentityGuard, you must prepare the Oracle database. This section includes: Preparing the Oracle database for installation on page 22 Installing the Entrust IdentityGuard schema file for Oracle on page 23 Installing the JDBC driver on page 23 Remember to complete the procedures in this configuration guide before you install Entrust IdentityGuard. Preparing the Oracle database for installation Create a separate tablespace for Entrust IdentityGuard data; that is, don t use the System tablespace. In addition, create another tablespace for temporary data created by Oracle operations such as sorting. You also need to create a database user for use by Entrust IdentityGuard with the following privileges: Resource Create session Create view Create procedure This user will administer and own the Entrust IdentityGuard database schema and data, including the database tables. Note: When preparing an Oracle database for Entrust IdentityGuard, keep in mind the language and character set requirements of the country in which it will run. If needed, use the NLS_LANG parameter to set the working language. It is set as a local environment variable on UNIX platforms. In the past, Entrust IdentityGuard products used this setting as the default: % setenv NLS_LANG AMERICAN_AMERICA.WE8ISO8859P1 Some Entrust products are moving to the following setting, which supports the Euro currency symbol: % setenv NLS_LANG AMERICAN_AMERICA.WE8ISO8859P15 Consult the Oracle document Oracle Database Globalization Support Guide for more information. 22 Entrust IdentityGuard 8.1 Database Administration Guide Document issue: 1.0

Installing the Entrust IdentityGuard schema file for Oracle Once you create the Entrust IdentityGuard database user and prepare the tablespaces, you can create the Entrust IdentityGuard database tables using one of the schema command files included in the Entrust IdentityGuard installation package. Extract the applicable archive file for your operating system. Refer to the Entrust IdentityGuard Installation Guide Installation Guide for details. The schema files for Oracle are available under the IG_81/sql directory. You can access them without having to install Entrust IdentityGuard. Run them as the newly created Entrust IdentityGuard database user. There are three schema files to choose from: If you are installing a new version of Entrust IdentityGuard, use the file oracle_v81_schema.sql. If you are upgrading from Entrust IdentityGuard 8.0, use the file oracle_v80_to_v81_upgrade.sql. If you are upgrading from Entrust IdentityGuard 7.2, use the file oracle_v7x_to_v81_upgrade.sql. Running the SQL file There are several ways to run the above SQL files. Below is a simple example using sqlplus. To run the SQL file 1 Copy the applicable schema file to a working directory on the database server. 2 Enter a command like the following on the database server: sqlplus <igadmin>/<igpass> @ <schema-file> Where: igadmin is the database user account created for Entrust IdentityGuard igpass is the Entrust IdentityGuard database password schema-file is the full path name to the applicable schema file Installing the JDBC driver Locate the correct JDBC driver file. It is provided with your database software or from a 3rd-party vendor. Entrust IdentityGuard supports Oracle s JDBC thin client driver (ojdbc14.jar) for the Oracle 9i or 10g database. This is a platform-independent, type-4 driver that uses Java to connect directly to Oracle. It implements Oracle's SQL *Net/Net8 and TTC Configuring an Oracle database 23

adapters using its own TCP/IP-based Java socket implementation. The driver does not require you to have Oracle client software installed, but does require that you configure the database server with a TCP/IP listener. Place the JAR file in a location on the Entrust IdentityGuard Server where the person installing Entrust IdentityGuard can find it during configuration. 24 Entrust IdentityGuard 8.1 Database Administration Guide Document issue: 1.0

Gathering your configuration data You can now install Entrust IdentityGuard. This section describes how to prepare for this installation. Refer to the Entrust IdentityGuard Installation Guide for complete installation instructions. As part of the Entrust IdentityGuard installation procedure, the installer will present questions or options about the database and JDBC files. Make a note of the information requirements in the following table. Table 5: Configuration data Configuration data JDBC driver JAR file name JDBC driver class name Database URL Oracle database user Oracle database user password Oracle database schema name Description You will be asked for the name of the correct JDBC file during installation. It is: ojdbc14.jar. You will be asked for the Oracle JDBC driver class you are using. It is: oracle.jdbc.driver.oracledriver. Each JDBC driver defines its own syntax for the URL. Consult the driver documentation for details. For the Oracle thin client driver, the URL will look like this: jdbc:oracle:thin:@<dbhost>:<dbport>:<sid> Where: dbhost is the name of the server that hosts the Oracle database dbport is the database server port number. The default is 1521 SID is the ID that uniquely distinguishes your Oracle database from any other database that may be on your system Specify the name or ID of the account through which Entrust IdentityGuard logs in and accesses your Oracle database. Entrust IdentityGuard uses this name together with the database user password to log in to your database. Provide the password assigned to the Oracle database user. Entrust IdentityGuard uses this password together with the database user to log in to your database. Specify your database schema name. This prompt is used with non-oracle JDBC repositories. Configuring an Oracle database 25

26 Entrust IdentityGuard 8.1 Database Administration Guide Document issue: 1.0

Index - A B C D E F G H I J K L M N O P Q R S T U V W X Y Z- C configuration for DB2 16, 20 Customer support 10 D database backup 6 DB2 13 Oracle 21 sizing 5 SQL 17 DB2 13 configuration 16, 20 database 13 language 14 schema files 14 G Getting help Technical Support 10 I installation DB2 14 oracle 23 SQL 18 J JDBC for DB2 15 for Oracle 23 for SQL 19 setting up 5 L language DB2 14 Oracle 22 SQL 18 O Oracle database 21 JDBC 23 language 22 schema file 23 P Professional Services 11 S schema file DB2 14 edit for DB2 15 edit for SQL 19 Oracle 23 run for Oracle 23 SQL 18 SQL Server database 17 T Technical Support 10 typographic conventions 7 27

- A B C D E F G H I J K L M N O P Q R S T U V W X Y Z- 28 Entrust IdentityGuard 8.1 Database Administration Guide Document issue: 1.0

- A B C D E F G H I J K L M N O P Q R S T U V W X Y Z- Index 29