LEVEL AND VOLUME MEASUREMENTS OF BULK SOLIDS Taking the guesswork out of solids level measurement 1
Measuring powders and solids isn t easy. Just getting a level reading is a challenge, but you really need volume measurement to provide true values. You are measuring a surface that is uneven with irregular build-up, and you often have to cope with high levels of dust. But what if you could... Make informed decisions about inventory control??? Increase safety and control your process better Overcome time consuming maintenance issues??? Take the guesswork out of measuring the level, volume and mass of materials 2
Make informed decisions about inventory control and usage When you need to improve operational efficiency, avoid overspills and optimize delivery scheduling, accurate material measurement and control of inventory is vital. With the Rosemount 5708 Series 3D Solids Scanner, accurate measurements for production tracking, process control, inventory management and usage forecasting are easy. The Rosemount 5708 delivers accurate measurement of bulk solids and powders regardless of the type of material or product characteristics, no matter how large the storage silo, bin or container, or harshness of the storage environment. + Get highly accurate level and volume measurement + Improve production tracking + Obtain insight into what is really going on inside your silo with 3D representation of actual product surface The Rosemount 5708 3D Solids Scanner incorporates advanced technology for accurate measurements of bulk solids and powders 3
Increase safety and manage your plant assets Silos can be susceptible to collapse which could result in catastrophic failures. This is often caused by uneven sidewall loading caused by material build-up, or uneven filling and emptying. You need to trust your systems to ensure this doesn t happen. With 3D visualization included in the Rosemount 3DMultiVision software, you have a better understanding of the distribution of material inside the silo, which helps prevent the threat of structural damage to the container. The 3DMultiVision software provides remote monitoring of stored materials, limiting operator exposure to harsh conditions, and reducing costs. Manual measurements are eliminated along with the need for operators to climb the vessel to make checks. + Get early visual detection of possible failures + Avoid costly damage and keep your operators safe + Prevent regular top of vessel inventory checks The Rosemount 5708 3D Solids Scanner utilizes multiple point measurement technology 4
Overcome time consuming maintenance issues The Rosemount 5708 needs very little maintenance. It has no moving parts to stick, requires no re-calibration, and its self-cleaning capabilities prevent material from accumulating on the antennas, ensuring reliable performance in harsh dusty conditions. 3D Visualization helps you to better understand the distribution of material inside the silo, enabling scheduling of appropriate maintenance, and avoiding costly damage and production interruptions. + Enable maintenance scheduling + Eliminate the need for manual measurements + No need for special calibration + No moving parts, no risk of sticking + Continuous self-cleaning reduces maintenance Outer unit is coated with build-up from dust. Inside the unit is clean and fully operational. Uneven distribution of material and build-up on walls can stress the structure of a silo. 5
Take the guesswork out of solids level measurement Uneven surfaces and harsh, dusty environments do not pose a problem for the Rosemount 5708 Series non-contacting 3D Solids Scanner which measures volume as well as minimum, maximum and average levels of stored materials. Using dust penetrating low frequency acoustic waves to generate surface mapping of the stored materials, the 3D Solids Scanner takes the guesswork out of solids level measurement. There are three models to choose from depending on your application: Rosemount Series 5708L: Average Level The Rosemount 5708L is optimized to measure level. Its smaller beam-width concentrates the signal over a smaller area and provides a basic level measurement. Rosemount Series 5708V: Volume Provides highly accurate readings of level and volume. Works in most containers and operates with a variety of beam angles. Rosemount Series 5708S : Volume and Visualization Offering the same functionality as the 5708V but with the addition of software that allows 3D visualization of the stored contents. This feature is useful for mapping build-up and other irregularities that form. For very large silos, multiple scanners may be required to cover the whole area. The signals are merged together in the system software to provide a single view of the entire contents. Rosemount 5708 3D Solids Scanner 3DVision software print screens 6
Choose the right model for your application Enabling measurements in previously inaccessible applications, the Rosemount 5708 3D Solids Scanner communicates with your plant s existing Enterprise Resource Planning (ERP) system seamlessly, giving you greater control over inventories and the entire manufacturing process, and optimizing the potential for increased overall efficiency and profitability. Feature Series Series Series 5708L 5708V 5708S Non-contact continuous level measurement Unaffected by dust generation Works with practically all solid materials including those with low dielectric constants Free of mechanical loads Maintenance-free Continuous self-cleaning Long measuring range True level measurement True volume measurement Measures volume as well as minimum and maximum levels Consistently accurate measurements in narrow silos Reliable and accurate in wide silos Suitable for open bins, warehouses, bunkers and open areas 3D Surface visualization Computer display showing material build-up on walls of silos / containers Available Not available 7
Measure your inventory even in large storage facilities When you need to measure very wide silos, domes, large open bins, bulk storage rooms, stockpiles and warehouses, the Rosemount 5708 3D Solids Scanner system is the solution. The Rosemount 5708 will measure virtually any material over a wide area, but in some applications two or more scanners may be needed. The output from the scanners are merged together into a single 3D map of the whole surface. Applications include + Coal bunkers at power plants + Large domes for storing raw sugar, fertilizers + Large silos storing grains, corn etc. + Large clinkers and other large silos at cement manufacturing plants + Wide stockpiles, warehouses and open bins Real-time inventory control with the Rosemount 5708 3D Solids Scanner system 8
3D image of material surface received from the Rosemount 5708 3D Solids Scanner System Measure what you manage, accurately, reliably and safely under the harshest conditions A Rosemount 5708 3D Solids Scanner System acts as just one device + Transmissions from the scanners are synchronized so that they do not interfere with each other + Takes into account the full set of mapping points from all scanners + Generates a complete merged visualization of the entire surface Image created by the multi-scanner software 9
Monitor multiple vessels easily Monitoring vessels across multiple sites and remote geographic areas is a challenge. You need accurate information that is based on real-time conditions. Rosemount 3DMultiVision software provides sophisticated analysis of current conditions as well as historical data that allows you to improve your workflows while reducing operating costs. The software provides: + Volume + Min/max level/distance + Mass (with a given density) The Rosemount 5708 3D Solids Scanners are linked to a dedicated PC that acts as the server using standard RS-485 communications. Authorized users have controlled access from local computers to both real-time and historical data stored on the server. The software displays measurement data and general information 10
Accurate real-time inventory management + Integrate real-time, accurate silo content and inventory level readings + Feed into inventory, supply chain and finance applications + Receive timely operation efficiency reports across storage and production sites + Consolidate inventory tracking techniques and processes Rosemount 3DMultiVision increases efficiency and enhances safety 3DMultiVision allows remote monitoring of the volume of stored materials. This lowers costs and reduces the risk of exposing staff to harsh environments. Rosemount 3D MultiVision software allows users to gather real-time inventory data from all sized storage vessels and groups of vessels at different sites. 11
For more information on industry leading wireless level instrumentation visit us at www.rosemount.com/level Non-contacting radar Guided wave radar Vibrating forks Float switches Ultrasonic Acoustic DP Level The Emerson logo is a trademark and service mark of Emerson Electric Co. Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc. All other marks are the property of their respective owners. 2014 Rosemount Inc. All rights reserved. Emerson Process Management Rosemount Inc. 8200 Market Boulevard Chanhassen, MN 55317 USA T (U.S.) 1-800-999-9307 T (International) (952) 906 8888 F (952) 906 8889 www.rosemount.com Emerson Process Management Blegistrasse 23 P.O. Box 1046 CH 6341 Baar Switzerland T +41 (0) 41 768 6111 F +41 (0) 41 768 6300 Emerson Process Management Asia Pacific Pte Ltd 1 Pandan Crescent Singapore 128461 T +65 6777 8211 F +65 6777 0947 Emerson Process Management Latin America 1300 Concord Terrace, Suite 400 Sunrise Florida 33323 USA T +1 954 846 5030 Emerson FZE P.O. Box 17033 Jebel Ali Free Zone Dubai, UAE T +971 4 883 5235 F +971 4 883 5312 00803-0100-6165, Rev AB 08/14 12